SAN213 Instruction Manual

Transcription

1 SAN213 Instruction Manual Scan here to view product demo and install videos or visit san.us/105 Milestone AV Technologies 6436 City West Parkway Eden Prairie, MN USA Customer Service Americas: Europe, Middle East, and Africa: +31 (0) Asia Pacific: accents.sanus.com 2012 Milestone AV Technologies, a Duchossois Group Company. All rights reserved. Accents is a Milestone brand. All other brand names or marks are used for identification purposes and are trademarks of their respective owners. ( <02>)

2 IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS PLEASE READ ENTIRE MANUAL PRIOR TO USE Specifications Weight capacity-do NOT EXCEED: 20.5 kg (45 lb) includes TV and any accessories Tilt: ± 15 CAUTION: Avoid potential personal injuries and property damage! Do not use this product for any purpose not explicitly specified by manufacturer. The wall must be capable of supporting five times the weight of the monitor and mount combined. This product is not designed for use in metal stud walls! If you do not understand these instructions, or have doubts about the safety of the installation, assembly or use of this product, contact manufacturer Customer Service or call a qualified contractor. Manufacturer is not responsible for damage or injury caused by incorrect assembly or use. Technical Specifications 200 mm 7.87 in. 100 mm 3.94 in. 75 mm 2.95 in. 75 mm 2.95 in. 100 mm 3.94 in mm 6.67 in mm 2.33 in mm in º mm in mm 2.53 in. 230 mm 9.06 in mm 5.65 in. 241 mm 9.49 in <02>

3 Required Tools 13mm (1/2 in.) 5.5mm (7/32 in.) 10mm (3/8 in.) Supplied Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! NOTE: M4 describes the diameter, mm describes the length of screws that are labeled M# X ##mm. Not all hardware included will be used. x 1 [02] x 1 5/16 x 2 ½ in. 1/4-20 x 3 ¼ in. [03] x 2 [04] x 2 [05] x 1 1/4-20 in. 0.5 in. 0.5 in. [06] x 1 [07] x 1 [08] x 1 [09] x 1 [10] x 2 M4 x 12mm [11] x 4 M4 x 30mm M x 1/2 in. [12] x 4 [13] x 4 [14] x 2 [15] x 4 [16] x 4 5/32 in. [17] x 4 [18] x <02> 3

4 1 Attach TV Bracket For TVs with a flat/unobstructed back Ensure that the bracket is level on the back of the TV. Standard configurations are shown. If you need extra space to accommodate cables, recesses, or protrusions, see the installation option that uses spacers. For special applications, or if you are uncertain about your hardware selection, contact Customer Service. [11] [02] 1 Attach TV Bracket For TVs with an irregular/obstructed back Ensure that the bracket is level on the back of the TV. Standard configurations are shown. For special applications, or if you are uncertain about your hardware selection, contact Customer Service. [12] [02] [13] <02>

5 2 Mount the Wall Plate Wood Stud 13 mm (1/2 in.) 5.5 mm (7/32 in.) 1. Locate stud. Verify the center of the stud with an awl or thin nail or use an edge to edge stud finder. CAUTION: To avoid potential injuries or property damage: Any material covering the wall must not exceed 16 mm (5/8 in.). Minimum wood stud size: common 2 x 4 in. (nominal 1.5 x 3.5 in.) 2. Level the wall plate and mark the hole locations. 3. Drill pilot holes as illustrated. CAUTION: To avoid potential injuries or property damage: Pilot holes MUST be drilled to a depth of 63.5 mm (2½ in.), using a 5.5 mm (7/32 in.) diameter drill bit. 4. Tighten the lag bolts [03] only until they are pulled firmly against the wall plate. CAUTION: Improper use could reduce the holding power of the lag bolt. To avoid potential injuries or property damage: DO NOT over-tighten the lag bolts [03]. 5. Place lag bolt covers [16] over lag bolts [03]. 2 1 < 16 mm (5/8 in.) mm 2½ in. [03] <02> 5 [16]

6 2 Mount the Wall Plate Solid Concrete and Concrete Block 13mm (1/2 in.) 10mm (3/8 in.) 1. Level wall plate and mark the hole locations. CAUTION: To avoid potential injuries or property damage: Mount wall plate directly onto the concrete surface. Minimum solid concrete thickness: 8 in. Minimum concrete block size: 8 x 8 x 16 in. 2. Drill pilot holes as illustrated. CAUTION: To avoid potential injuries or property damage: Pilot holes MUST be drilled to a depth of 75 mm (3 in.), using a 10 mm (3/8 in.) diameter drill bit. Never drill into the mortar between blocks. 3. Insert lag bolt anchors [04]. Be sure the anchors [04] are seated flush with the concrete surface. 4. Tighten the lag bolts [03] only until they are pulled firmly against the wall plate. CAUTION: Improper use could reduce the holding power of the lag bolt. To avoid potential injuries or property damage: DO NOT over-tighten the lag bolts [03]. 5. Place lag bolt covers [16] over lag bolts [03] mm 3 in. 3 4 [04] [03] [04] 5 [16] <02>

7 3 Attach the TV Bracket onto the Swing Arm/Wall Plate 1. Fit nut [08] and cover [16] into underside of mount arm. 2. Place washer [07] and pivot pin [06] onto mount arm. 3. Heavy: You will need assistance with this step! Fit mounting bracket [02] onto pivot pin [06]. Slide washers [10] and spacer [09] onto mounting bolt [05] and fit bolt through mounting bracket [02] and pivot pin [06] until it meets nut [08]. 4. Use hex key [18] to tighten mounting bolt [05] and secure mounting bracket [02] to arm. 4 [18] [02] 3 [16] [05] [10] [09] [10] [02] 1 2 [06] [07] [08] [16] <02> 7

8 4 Manage Cables Pull the arm to its full extension before routing the cables through the channels, then loosely route the cables. This will give the cables enough slack to prevent excess tension when adjusting the position of the arm. [14] [15] [15] [14] [15] [15] [14] [17] [17] [17] [14] [17] <02>

9 5 Adjust Tension A: Adjust arm extend / retract tension B: Adjust left / right swivel tension C: Adjust up / down tilt tension B TOP VIEW [18] SIDE VIEW [18] A SIDE VIEW C <02> 9

10 Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively, Milestone ), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document <02>