IRFF9130 JANS2N6849 JANTXV2N V, P-CHANNEL. Absolute Maximum Ratings. Features: 1 PD D. REPETITIVE AVALANCHE AND dv/dt RATED

Transcription

1 PD D REPETITIVE AVALANCHE AND dv/dt RATED HEXFET TRANSISTORS THRU-HOLE (TO-205AF) Product Summary Part Number BVDSS RDS(on) ID IRFF V 0.30Ω -6.5A IRFF9130 JANTX2N6849 JANTXV2N6849 JANS2N6849 REF:MIL-PRF-19500/ V, P-CHANNEL The HEXFET technology is the key to International Rectifier s advanced line of power MOSFET transistors. The efficient geometry and unique processing of this latest State of the Art design achieves: very low on-state resistance combined with high transconductance. The HEXFET transistors also feature all of the well established advantages of MOSFETs such as voltage control, very fast switching, ease of parelleling and temperature stability of the electrical parameters. They are well suited for applications such as switching power supplies, motor controls, inverters, choppers, audio amplifiers and high energy pulse circuits. TO-39 Features: n Repetitive Avalanche Ratings n Dynamic dv/dt Rating n Hermetically Sealed n Simple Drive Requirements n Ease of Paralleling Absolute Maximum Ratings Parameter VGS = -10V, TC = 25 C Continuous Drain Current -6.5 VGS = -10V, TC = 100 C Continuous Drain Current -4.1 IDM Pulsed Drain Current ➀ -25 TC = 25 C Max. Power Dissipation 25 W Units Linear Derating Factor 0.20 W/ C VGS Gate-to-Source Voltage ±20 V EAS Single Pulse Avalanche Energy ➁ 92 mj IAR Avalanche Current ➀ A EAR Repetitive Avalanche Energy ➀ mj dv/dt Peak Diode Recovery dv/dt ➂ -5.5 V/ns TJ Operating Junction -55 to 150 TSTG Storage Temperature Range Lead Temperature 300 (0.063 in. (1.6mm) from case for 10s) o C Weight 0.98(typical) g For footnotes refer to the last page /20/01 A

2 Electrical Tj = 25 C (Unless Otherwise Specified) Parameter Min Typ Max Units Test Conditions BVDSS Drain-to-Source Breakdown Voltage -100 V VGS = 0V, ID = -1.0mA BVDSS/ TJ Temperature Coefficient of Breakdown V/ C Reference to 25 C, ID = -1.0mA Voltage RDS(on) Static Drain-to-Source On-State 0.30 VGS = -10V, ID = -4.1A ➃ Ω Resistance VGS =-10V, ID =-6.5A ➃ VGS(th) Gate Threshold Voltage V VDS = VGS, ID = -250µA gfs Forward Transconductance 2.5 S ( ) VDS > -15V, IDS = -4.1A ➃ IDSS Zero Gate Voltage Drain Current -25 VDS= -80V, VGS=0V -250 µa VDS = -80V VGS = 0V, TJ = 125 C IGSS Gate-to-Source Leakage Forward -100 VGS = -20V IGSS Gate-to-Source Leakage Reverse 100 na VGS = 20V Qg Total Gate Charge VGS =-10V, ID = -6.5A Qgs Gate-to-Source Charge nc VDS= -50V Qgd Gate-to-Drain ( Miller ) Charge td(on) Turn-On Delay Time 60 VDD = -50V, ID = -6.5A, tr Rise Time 140 VGS =-10V,RG =7.5Ω ns td(off) Turn-Off Delay Time 140 tf Fall Time 140 LS + LD Total Inductance 7.0 nh Measured from drain lead (6mm/0.25in. from package) to source lead (6mm/0.25in. from package) Ciss Input Capacitance 800 VGS = 0V, VDS = -25V Coss Output Capacitance 350 pf f = 1.0MHz Crss Reverse Transfer Capacitance 125 Ω Source-Drain Diode Ratings and Characteristics Parameter Min Typ Max Units Test Conditions IS Continuous Source Current (Body Diode) -6.5 ISM Pulse Source Current (Body Diode) ➀ -25 A VSD Diode Forward Voltage -4.7 V Tj = 25 C, IS =-6.5A, VGS = 0V ➃ trr Reverse Recovery Time 250 ns Tj = 25 C, IF = -6.5A, di/dt -100A/µs QRR Reverse Recovery Charge 3.0 µc VDD -50V ➃ ton Forward Turn-On Time Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD. Thermal Resistance Parameter Min Typ Max Units Test Conditions RthJC Junction-to-Case 5.0 C/W RthJA Junction-to-Ambient 175 Typical socket mount Note: Corresponding Spice and Saber models are available on the G&S Website. For footnotes refer to the last page 2

3 Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics Fig 3. Typical Transfer Characteristics Fig 4. Normalized On-Resistance Vs. Temperature 3

4 13 13 a& a& b Fig 5. Typical Capacitance Vs. Drain-to-Source Voltage Fig 6. Typical Gate Charge Vs. Gate-to-Source Voltage Fig 7. Typical Source-Drain Diode Forward Voltage Fig 8. Maximum Safe Operating Area 4

5 R D R G D.U.T. + - V DD Pulse Width 1 µs Duty Factor 0.1 % Fig 10a. Switching Time Test Circuit t d(on) t r t d(off) t f 10% Fig 9. Maximum Drain Current Vs. Case Temperature 90% Fig 10b. Switching Time Waveforms Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case 5

6 L R G -20V tp D.U.T I AS 0.01Ω DRIVER V DD A 15V Fig 12a. Unclamped Inductive Test Circuit I AS Fig 12c. Maximum Avalanche Energy Vs. Drain Current tp V (BR)DSS Fig 12b. Unclamped Inductive Waveforms Current Regulator Same Type as D.U.T. -10V Q G -12V.2µF 50KΩ.3µF Q GS Q GD D.U.T. - + V G -3mA Charge I G I D Current Sampling Resistors Fig 13a. Basic Gate Charge Waveform Fig 13b. Gate Charge Test Circuit 6

7 Foot Notes: ➀ Repetitive Rating; Pulse width limited by maximum junction temperature. ➁ VDD = -25V, starting TJ = 25 C, Peak IL = -6.5A, VGS = -10V ➂ ISD -6.5A, di/dt -140A/µs, VDD -100V, TJ 150 C Suggested RG = 7.5 Ω ➃ Pulse width 300 µs; Duty Cycle 2% Case Outline and Dimensions TO-205AF LEGEND 1- SOURCE 2- GATE 3- DRAIN IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) TAC Fax: (310) Visit us at for sales contact information. Data and specifications subject to change without notice. 04/01 7