SERIES CL - CK - Contactors
|
|
- Dora Shelton
- 5 years ago
- Views:
Transcription
1 الکتروه م ند SERIES CL - CK - Contactors Contactors Series CL C L Type identification Housing A=AC D=DC E=DC/AC with electronic module Auxiliary contacts NO Auxiliary contacts NC Control voltage.5 1 Contactor (see.11) Auxiliary contacts side-mounted (see.15) 3 Mechanical interlock (see.15) Auxiliary contacts front-mounted (see.15) 5 Electronic timer block (see.16) 6 Transient voltage suppressor block (see ie.16) 7 Mechanical latch block (see.15) 8 Pneumatic timer block (see.15) 9 Thermal overload relay (see.) Contactors Series CK 3 = 3-pole = -pole NO B = -pole NO + NC T = screw terminal M = double clamp terminal Type identification Housing A=AC E=DC/AC with electronic module Auxiliary contacts NO Auxiliary contacts NC Control voltage C K Version (B, C) 3 = 3-pole = -pole (NO) Thermal overload relay RT Type identification Setting range (A...W) R T Housing = class 10A (RT1) class 10 (RT, RT3, RT, RT5, RT6) = class 0 (RT1. RT. RT3) L = class 30 (RT, RT5, RT6)
2 SERIES CL - Contactors Three-pole contactors from 9 to 105A (AC3) Power circuit (AC): 690V Control circuit: Alternating current 690V AC Terminal numbering in accordance with EN and EN 5001 Fixing by clipping onto 35 mm DIN rail EN or by screws Degree of protection CL00... to CL0... : IP0 CL5... to CL10... : IP10 Screws protected against accidental contact in accordance with VDE Three coil terminals. Accessories: Mounting possibilities of front/side instantaneous auxiliary contact blocks, timed auxiliary contact blocks, mechanical latch, transient suppressor block and interface modules Maximum number of auxiliary contacts: four for CL00...CL5 six for CL03...CL5 eight for CL06...CL10 CL00A310TN CL5A300MN CL07A300MN Control circuit: alternating current Max. operat. current Admissible power AC3 Elec. endur. Aux. contacts Cat. no. (1) Weight Non- Motors 0V 380V 15V 500V Category 3 1 inductive 0V 30V 00V 0V AC3 load 3-phase 50/60 Hz AC1 AC3 A A kw kw kw kw # ops x CL00A300T CL00A310T CL00A301T x CL01A300T CL01A310T CL01A301T x CL0A300T CL0A310T CL0A301T x CL5A300T CL5A310T () CL5A301T () x CL03A310M CL03A301M x CL0A300M CL0A310M CL0A301M x CL5A300M CL5A311M (3) x CL06A300M CL06A311M (3) x CL07A300M CL07A311M (3) x CL08A300M CL08A311M (3) x CL09A300M CL09A311M (3) x CL10A300M CL10A311M (3) 1.70 Spare coils Alternating current CL00 - CL5 LB1A CL03 - CL5 LB3A 0.10 CL06 - CL10 LBA 0.15 Available coil voltages (1) Alternating current (V) C D F G J K M N R U V W X Y Z 50Hz (1) To complete the catalogue number, replace the symbol by the code corresponding to the voltage and frequency of the control circuit. () Equipped with one block BCLF (see.15) (3) Equipped with two blocks BCLF (see.15).11 Thermal overload relay, see. Technical specifications, see.3 Dimensions, see.
3 SERIES CL - Contactors.1 Three-pole contactors from 9 to 105A (AC3) Control circuit : Direct current 0V Terminal numbering in accordance with EN and EN 5001 Fixing by clipping onto 35 mm DIN rail EN or by screws Degree of protection CL00... to CL0... : IP0 CL5... to CL10... : IP10 Screws protected against accidental contact in accordance with VDE Three coil terminals. The types CL...E are also suitable for AC control. Accessories: Mounting possibilities of front/side instantaneous auxiliary contact blocks, timed auxiliary contact blocks, mechanical latch, transient suppressor block and interface modules Maximum number of auxiliary contacts: four for CL00...CL5 six for CL03...CL5 eight for CL06...CL10 CL00D310TD Control circuit: direct current Max. operat. current Admissible power AC3 Elec. endur. Aux. contacts Cat. no. (1) Weight Non- Motors 0V 380V 15V 500V Category 3 1 inductive 0V 30V 00V 0V AC3 load 3-phase 50/60 Hz AC1 AC3 A A kw kw kw kw operations x CL00D310T CL00D301T x CL01D310T CL01D301T x CL0D310T CL0D301T x CL5D300T x CL03D310M CL03D301M x CL0D310M CL0D301M x CL5D300M x CL06E300M x CL07E300M x CL08E300M x CL09E300M x CL10E300M 1.60 Spare coils (pure DC coil) CL00 - CL5 LB1D 0.05 (pure DC coil) CL03 - CL5 LB3D 0.76 (coil + electronic module) CL06 - CL10 LBE Available coil voltages (1) Direct current (V). For contactors type CL...D / Operating limits: x Us B D E F G H I J K N P R X Voltage Direct current (V). Coil with electronic module for contactors CL...E (²) / Operating limits: x Us D F H J N Y Voltage (1) To complete the catalogue number, replace the symbol by the code corresponding to the voltage and frequency of the control circuit. () Can also be used with alternating current. Thermal overload relay, see. Technical specifications, see.3 Dimensions, see.
4 SERIES CL - Contactors Four-pole contactors (NO) from 5 to 10A (AC1) Power circuit (AC): 690V Control circuit: Alternating current 690V AC Direct current 0V DC Terminal numbering in accordance with EN and EN 5001 Fixing by clipping onto 35 mm DIN rail (EN ) or by screws. Degree of protection CL01... to CL0... : IP0 CL03... to CL09... : IP10 Screws protected against accidental contact in accordance with VDE Three coil terminals. The types CL...E are also suitable for AC control. Accessories: Mounting possibilities of front/side instantaneous auxiliary contact blocks, timed auxiliary contact blocks, mechanical latch, transient suppressor block and interface modules. CL01A00TN CL05A00MN Control circuit: alternating current Maximum operating Admissible Electrical Control Power Cat. no. (1) Weight current power AC1 endurance circuit contacts Non- 0V 380V 15V 500V Category inductive 30V 00V 0V AC1 load AC1 AC3 A A kw kw kw kw operations x 10 6 AC 0 CL01A00T x 10 6 AC 0 CL0A00T x 10 6 AC 0 CL03A00M x 10 6 AC 0 CL0A00M x 10 6 AC 0 CL05A00M x 10 6 AC 0 CL07A00M x 10 6 AC 0 CL09A00M 1.50 Spare coils CL01 - CL0 LB1A CL03 - CL0 LB3A 0.10 CL05 - CL09 LBA 0.15 Control circuit: direct current x 10 6 DC 0 CL01D00T x 10 6 DC 0 CL0D00T x 10 6 DC 0 CL03D00M x 10 6 DC 0 CL0D00M x 10 6 AC/DC 0 CL05E00M x 10 6 AC/DC 0 CL07E00M x 10 6 AC/DC 0 CL09E00M Spare coils (pure DC coil) CL00 - CL0 LB1D 0.05 (pure DC coil) CL03 - CL0 LB3D 0.76 (coil + electronic module) CL05 - CL09 LBE Available coil voltages (1) Alternating current (V) C D F G H J K M N R S T U V W X Y Z 50Hz CL09E00MJ Direct current (V). For contactors type CL...D / x Us () B D E F G H I J K N P R X Voltage Direct current (V). Coil with electronic module for contactors type CL...E (3) / x Us () D F H J N Y Voltage (1) To complete the catalogue number, replace the symbol by the code corresponding to the voltage and frequency of the control circuit. () Only for CL00 to CL5. Thermal overload relay, see.1 Technical specifications, see.3 Dimensions, see.
5 SERIES CL - Contactors.1 Four-pole contactors (NO + NC) from 1 to 80A (AC3) Power circuit (AC): 690V Control circuit: Alternating current 690V AC Direct current 0V DC Terminal numbering in accordance with EN and EN 5001 Fixing by clipping onto 35 mm DIN rail (EN ) or by screws. Degree of protection CL01... to CL0...: IP0 CL03... to CL09...: IP10 Screws protected against accidental contact in accordance with VDE Three coil terminals. The types CL...E are also suitable for AC control. Accessories: Mounting possibilities of front/side instantaneous auxiliary contact blocks, timed auxiliary contact blocks, mechanical latch, transient suppressor block and interface modules. CL01AB00TN Control circuit: alternating current Max. operat. current Admissible power AC3 Control Power contacts Cat. no. (1) Weight Non- Motors 0V 380V 15V 500V inductive 0V, 30V 00V 0V load 3-phase 50/60 Hz AC1 AC3 A A kw kw kw kw AC CL01AB00T AC CL0AB00T AC CL03AB00M AC CL0AB00M AC CL05AB00M AC CL07AB00M AC CL08AB00M 1.70 Spare coils CL01 - CL0 LB1A CL03 - CL0 LB3A 0.10 CL05 - CL08 LBA 0.15 Control circuit: direct current DC CL01DB00T DC CL0DB00T DC CL03DB00M DC CL0DB00M DC/AC CL05EB00M DC/AC CL07EB00M DC/AC CL08EB00M 1.30 CL05EB00MJ Spare coils (pure DC coil) CL00 - CL0 LB1D 0.05 (pure DC coil) CL03 - CL0 LB3D 0.76 (coil + electronic module) CL05 - CL08 LBE Available coil voltages (1) Alternative current (V) C D F G H J K M N R S T U V W X Y Z 50Hz Direct current (V). For contactors type CL...D B D E F G H I J K N P R X Voltage Direct current (V). Coil with electronic module for contactors type CL...E (³) D F H J N Y Voltage (1) To complete the catalogue number, replace the symbol by the code corresponding to the voltage and frequency of the control circuit. () Only for CL00 to CL5. Technical specifications, see.3 Dimensions, see.
6 SERIES CL - Accessories BCLF10 Instantaneous auxiliary contact blocks Terminal numbering in accordance with EN and EN 5001 Terminals protected against accidental contact in accordance with VDE 0106 T.100, VBG : IP0. Combinations for contactors and front/side mounted auxiliary contact blocks, see pages K. and K.3 For use with Mounting Type Contacts Cat. no. Weight BCLL11 BTLF30C CL00...CL10 Front one pole BCLF BCLF BCLF10G BCLF01G CL00...CL10 Side two pole BCLL BCLL CL00...CL10 Side (1) two pole BRLL BRLL (1) For combinations of more than front-mounted and side-mounted auxiliary contact blocks Pneumatic timer auxiliary contact blocks For use with Mounting Type Contacts Time Cat. no. Weight RMLFN BEL CL00...CL10 Front Delayed s. BTLF30C ON s. BTLF60C CL00...CL10 Front Delayed s. BTLF30D OFF s. BTLF60D Sealing cover protection for pneumatic timer BTLFX Mechanical latch blocks Terminal numbering in accordance with EN Disconnection of the contactor or auxiliary contactor, either using an electrical pulse or manually. Terminals protected against accidental contact in accordance with VDE 0106 T.100, VBG Frontal selector allows for adaptation in function of the housing of the contactor. For use with Cat. no. () Weight CL00...CL10 RMLF 0.08 () To complete the catalogue number, replace the symbol by the code corresponding to the voltage and frequency of the control circuit. D G HC J N U Y 50 Hz, 3, 8 110, 115, 10, 17 0, 30, 0, 380, 00, 15, 0, , 660/690 DC 3, 36, 8 110, 10, 0, 0, BEL0 Mechanical and mechanical/electrical interlock Side mounted to the contactor For use with Type Cat. no. Weight CL00...CL5 Mechanical BELA 0.05 CL05...CL10 Mechanical BEL 0.05 CL00...CL5 Mech./electrical BELA CL05...CL10 Mech./electrical BEL Technical specifications, see.3 Dimensions, see.
7 SERIES CL - Accessories BSLRR Transient voltage suppressor block Directly connected parallel to the coil terminals A1-A.16 BETL5C IMRD IMRCR Control circ. For use with Type Ue Cat. no. Weight AC CL00...CL5... R/C V...8V BSLRG V...17V BSLRK V...0V BSLRR 0.00 AC CL05A...CL10A... R/C V...8V BSLR3G V...17V BSLR3K V...0V BSLR3R 0.00 DC CL...D... Diode 1V...600V BSLDZ 0.00 AC/DC CL... Varistor V...8V BSLV3G V...17V BSLV3K V...0V BSLV3R V...500V BSLV3U 0.00 Electronic timer module Directly connected parallel to the coil terminals A1-A Control circ. For use with Type Time Cat. no. Weight -50V AC/DC CL00 to CL10 Delayed ON s. BETL0C s. BETL5C 0.00 Delayed OFF s. BETL0D s. BETL5D 0.00 Interface module Directly connected parallel to the coil terminals A1-A Control circ. For use with Type Ue (DC) Cat. no. Weight -50V AC CL00 to CL10 Relay V IMRD V DC CL00 to CL5 8V IMRG Relay + V IMRFD forced operation 8V IMRFG Solid state V IMSSD 0.05 Auto / Manual / IMAMS 0.05 Off control Transient voltage suppressor block to use with interface modules To be plugged inside the interface module or inside the electronic timer module. Pole terminal protector IP xxb For use with Mounting Cat. no. Weight CL03...CL0... Single pole IPxxB PTP0 CL5... Single pole IPxxB PTP5 CL05...CL08... Single pole IPxxB PTP08 CL09...CL10... Single pole IPxxB PTP10 Identification For use with Type Con. circ. AC/DC Cat. no. Weight CL00...CL5... R/C V...8V IMRCG V...17V IMRCK V...0V IMRCR 0.00 CL05A...CL10A... R/C V...8V IMRC3G V...17V IMRC3K V...0V IMRC3R 0.00 CL...D... Diode 1V...600V IMD1Z 0.00 CL... Varistor V...8V IMV3G V...17V IMV3K V...0V IMV3R 0.00 Technical specifications, see.3 Dimensions, see. Sheets of labels (10 sheets of 60 labels each) EAT Labeling plate base (50 pieces in one pack) SPR 0.001
8 SERIES CL - Accessories Coils Alternating current LBAN CL...A For use with Cat. no. (1) Weight CL00...CL5 LB1A CL03...CL5 LB3A 0.10 CL05...CL10 LBA 0.15 Alternating current (V) C D F G H J K M N R S T U V W X Y Z 50Hz (1) To complete the catalogue number, replace the symbol by the corresponding code. Direct current () CL...D For use with Cat. no. (1) Weight CL00...CL5 LB1D 0.05 CL03...CL5 LB3D u B D F G H I J K N P R X Voltage (1) To complete the catalogue number, replace the symbol by the corresponding code. Direct current (V) with electronic module (also for use with alternating current) () CL...E For use with Cat. no. (1) Weight CL05...CL10 LBE D F H J N Y Voltage (1) To complete the catalogue number, replace the symbol by the corresponding code. () Operating limits x Us. Contact kits For use with Number of sets (1) Type Cat. no. Pack Weight CL NO V3100B CL , CL NO V3101B CL01...B NO-NC VB101B CL0...3, CL NO V310B CL0...B... NO-NC VB10B CL NO V315B CL03...,CL NO V3103B CL03...B... NO-NC VB103B CL , CL NO V310B CL0...B NO-NC VB10B CL NO V315B CL05... NO V3105B CL05...B... NO-NC VB105B CL NO V3106B CL , CL NO V3107B CL07...B... NO-NC VB107B CL NO V3108B CL08...B... NO-NC VB108B CL NO V3109B CL NO V3110B (1) One set consists of two fixed contacts, one moving contact and accessory parts.
9 SERIES CL - Technical data Power circuit Three-pole version CL00 CL01 CL0 CL5 CL03 CL0 CL5 CL06 CL07 CL08 CL09 CL10 Rated thermal current Ith at θ 55 C (A) Rated operational current Ie (A) Rated operational voltage Ue (V) Four-pole version ( NO and NO + NC) CL01 CL0 CL03 CL0 CL05 CL07 CL08(1) CL09() Rated thermal current Ith at θ 55 C (A) Rated operational voltage Ue (V) (1) NO + NC only () NO only Three-pole and four-pole version CL00 CL01 CL0 CL5 CL03 CL0 CL5 CL05 CL06 CL07 CL08 CL09 CL10 Rated insulation voltage Ui (V) Maximum continuous current AC1 (A) Frequency limits (Hz) Making capacity (RMS) (acc. IEC 97) (A) Breaking capacity (RMS) (acc. IEC 97) Ue 00V (A) Ue = 500V (A) Ue = 690V (A) Short-time current 1 sec. (A) sec. (A) sec. (A) sec. (A) min. (A) min. (A) Recovery time (min.) Protection against short-circuits with fuses Coordination type "" am (A) gl-gg (A) Without welding am (A) gl-gg (A) Impedance per pole (mω) Power dissipation per pole AC1 (W) AC3 (W) Insulation resistance Between adjacent poles (MΩ) >10 >10 >10 >10 >10 >10 >10 >10 >10 >10 >10 >10 >10 Between poles and earth (MΩ) >10 >10 >10 >10 >10 >10 >10 >10 >10 >10 >10 >10 >10 Between input and output (MΩ) >10 >10 >10 >10 >10 >10 >10 >10 >10 >10 >10 >10 >10.35
10 SERIES CL - Technical data Electrical endurance Category AC1 Number of operations CL00 CL01 CLO CL5-CL03 CL0 CL5 CL06 CL07 CL08 CL09 CL10 Category AC Number of operations CL00 CL01 CLO CL5-CL03 CL0 CL5 CL06 CL07 CL08 CL09 CL Ic=Ie for all tensions Category AC Number of operations CL00 CL01 CLO CL5-CL03 CL0 CL5 CL06 CL07 CL08 CL09 CL10 A Rated motor power (Ic = 6 Ie) 0/30V 380/00V 15/0V /30V 380/00V 15/50V A Category AC3 Number of operations /30V 380/00V A kw kw kw Rated motor power (Ic =.5 Ie) kw kw kw Mixed category AC/AC3 Electrical endurance for mixed category (AC3/AC) is calculated with the following formula : CL00 CL01 CLO CL5-CL03 CL0 CL5 CL06 CL07 CL08 CL09 CL A Rated motor power (Ic = Ie) kw kw 15/0V kw
11 SERIES CL - Technical data Control circuit Three-pole and four-pole contactors Alternating current CL00...CL5 CL03...CL5 CL05...CL08 CL09...CL10 Rated insulation voltage Ui (V) Standard voltages Us 50 Hz (V) Voltage operating limits monofrequency coils Operating xus Pick-up xus Seal xus Consumption monofrequency coils Seal (VA) Pick-up (VA) Thermal power dissipation (50 Hz/60 Hz)) (W) / / / / 3.9 Power factor Magnetic circuit closed (cos j) Magnetic circuit open (cos j) Opening and closing times Values between + 10 % Us and 0 % Us Making time on excitation (NO contact) (ms) Breaking time on de-excitation (NO contact) (ms) Values at Us Making time on excitation (NO contact) (ms) Breaking time on de-excitation (NO contact) (ms) Mechanical endurance Monofrequency coils 10 6 ops Bifrequency coils (at 50 Hz)10 6 ops Maximum rate Monofrequency coils no load ops./h AC1 at rated power ops./h AC at rated power ops./h AC3 at rated power ops./h AC at rated power ops./h Direct current CL00D...CL5D CL03D...CL5D CL05E...CL08E CL09E...CL10E Rated insulation voltage Ui (V) Standard voltages Us (V) Operating limits Operating xus Pick-up xus Drop-out xus Consumption Magnetic circuit closed (W) Magnetic circuit open (W) Opening and closing times Values between + 10 % Us and 0 % Us Making time on excitation (NO contact) (ms) Breaking time on de-excitation (NO contact) (ms) Values at Us Making time on excitation (NO contact) (ms) Breaking time on de-excitation (NO contact) (ms) Mechanical endurance 10 6 ops Maximum rate No load ops./h AC1 and AC3 at rated power ops./h AC at rated power ops./h
12 SERIES CL - Technical data.38 Internal auxiliary contacts CL00...CL0 CL03-CL0 Rated insulation voltage Ui according to IEC 97 (V) Rated thermal current Ith at θ 55 C (A) 0 0 Making capacity (r.m.s.) according to IEC 97 AC15/AC11 Ue 00V, 50/60 Hz (A) DC13/DC11 Ue 0V DC (A) Breaking capacity (r.m.s.) according to IEC 97 AC15/AC11 Ue 00V, 50/60 Hz (A) DC13/DC11 Ue 0V DC (A) AC 15 Rated voltage and current Ue-Ie according to IEC 110/10V-10A 0/30V-10A 110/10V-10A 30/0V-10A 00/380V-6A 15/50V-5A 00/380V-6A 15/50V-5A 500V-A 690/660V-A 500V-A 690/660V-A according to UL, CSA A600 A600 DC 13 Rated voltage and current Ue-le according to IEC V-6A 8V-A 110V-A V-6A 8V-A 110V-A 0V-0.7A 0V-0.7A 0V-0.7A 0V-0.7A according to UL, CSA P600 P600 Electrical endurance ops Minimum operational power (operational safety) 17V - 5mA 17V - 5mA Short-circuit protection Max. fuse class gl-gg without welding (A) Insulation resistance Between contacts (MW) > 10 > 10 Between contacts and earth (MΩ) > 10 > 10 Between input and output (MΩ) > 10 > 10 Guaranteed no overlap between NO and NC contacts Space (mm) Time (ms) Impedance of the contacts (mω) Auxiliary contact blocks Instantaneous blocks Timed blocks BCLF..., BCLL..., BRLL BTLF... Rated insulation voltage (Ui) according to IEC 97 (V) Rated thermal current lth at θ 55 C (A) Making capacity (Ieff) according to IEC AC15/AC11 Ue 00V, 50/60 Hz (A) DC 13/DC11 Ue 0V DC (A) Breaking capacity (Ieff) according to IEC 97 AC15/AC11 Ue 00V, 50/60 Hz (A) DC13/DC11 Ue 0V, DC (A) AC15 Rated voltage and current Ue-Ie according to IEC 10/110V-6A 30/0V-6A 10/110V-6A 30/0V-6A 00/380V-A 0/15V-3.5A 00/380V-A 0/15V-3.5A 500V-.5A 690/660V-1.5A 500V-.5A 690/660V-1.5A according to UL, CSA A600 A600 DC13 Rated voltage and curent Ue-Ie according to IEC V-A 8V-A 110V-0.7A V-A 8V-A 110V-0.7A 0V-0.3A 0V-0.15A 0V-0.3A 0V-0.15A according to UL, CSA Q600 Q600 Electrical endurance 10 6 ops. 1 1 Mechanical endurance 10 6 ops Minimum operational current (operational safety) 17V - 5mA 17V - 5mA Short-circuit protection Max. fuse class gl-gg without welding (A) Insulation resistance Between contacts (MΩ) > 10 > 10 Between contacts and earth (MΩ) > 10 > 10 Between input and output (MΩ) > 10 > 10 Guaranteed no overlap between NO and NC contacts Space (mm) Time (ms) Impedance of the contacts (mω) Timing (ambient temperature between 5 C and + 55 C) Accuracy ± 5% Loss of accuracy after 0.5 x 10 6 ops. + 0% Loss of accuracy per rise C (0-55 C) % per C
13 SERIES CL - Technical data Mechanical latch blocks RMLF Rated insulation voltage Ui 1000 V Standard voltages Us : 50 to 60 Hz and DC V Operating limits xus Consumption for unlatching (auto cut-out) to 7 V 10 W / VA 110 to 0 V 130 W / VA Electrical unlatching control (1) Minimum pulse 10 ms Maintained auto cut-out by integral contact Manual unlatching control by local push-button Electrical making control Minimum pulse 0 ms auto cut-out by integral contact Manual making control by local push-button Auxiliary contact NC Utilisation AC15/AC11 according to IEC 10V - 6A 500V - 1.5A 30V/0V - A 690V/660V - 1A 00V/380V -.5A according to UL/CSA A600 Utilisation DC13/DC11 according to IEC V - 3A 0V - 0.3A 8V - 1.5A 00V A 110V - 0.6A according to UL/CSA Q600 Mechanical endurance CL00...CL5 3 million (100 ops./h) CL05...CL million (300 ops./h) Wiring diagram.39 (1) The contactor coil and the unlatch control must not be energised simultaneously. Terminal capacity for BCLF, BCLL, BTLF and RMLF Solid x 0.5 to.5 or 1 x Stranded and finely stranded without end sleeve x 0.5 to.5 or 1 x Finely stranded with end sleeve x 0.5 to.5 or 1 x AWG wires, solid and stranded 1 - AWG 75 C Wire Tightening torque 1.1 Nm / 10 Lb x in.
14 SERIES CL - Technical data Contact sequence (distance in mm) Open Closed Three-pole contactors 3NO CL00..., CL01..., CL0... Basic contactor Front mounted auxiliary contact blocks Lateral mounted auxiliary contact blocks BCLF 10 BCLF 01 BCLL 0 BCLL 11 BRLL 0 BRLL CL5... CL03..., CL0... CL5 CL06... CL07..., CL08... CL09... CL Four-pole contactors NO CL01..., CL CL03..., CL0... CL05... CL07... CL Four-pole contactors NO + NC CL01..., CL CL03..., CL CL CL07..., CL
15 SERIES CL - Technical data Terminal numbering according to EN 5001 Without auxiliary contact blocks Combinations Final of auxiliary contacts structure of the Possible Auxiliary contact blocks Description NO NC contactor basic contactors to be added 10E 1 0 CL0. 310T CL0. 310M 01E 0 1 CL T CL T CL0. 301T CL M CL0. 301M Front mounting auxiliary contact blocks with one contact each 11E 1 1 1E 1 CL0. 310T CL0. 310T CL0. 310M CL0. 310M + BCLF01 + BCLF01 + BCLF10.1 1E 1 CL0. 310T CL0. 310M + BCLF01 + BCLF01 31E 3 1 CL0. 310T CL0. 310M + BCLF01 + BCLF10 + BCLF10 1E 1 CL0. 310T CL0. 310M + BCLF01 + BCLF10 + BCLF10 + BCLF10 E CL0. 310T CL0. 310M + BCLF01 + BCLF01 + BCLF10 3E 3 CL0. 310T CL0. 310M + BCLF01 + BCLF01 + BCLF10 + BCLF10 13E 1 3 CL0. 310T CL0. 310M + BCLF01 + BCLF01 + BCLF01 3E 3 CL0. 310T CL0. 310M + BCLF01 + BCLF01 + BCLF01 + BCLF10 Lateral mounting auxiliary contact blocks with two contacts each 11E 1 1 CL T CL T CL0. 300T CL5. 300M CL0. 300M CL5. 300M + BCLL11 31E 3 1 CL T CL T CL0. 300T CL5. 300M CL0. 300M CL5. 300M + BCLL11 + BCLL0 E CL T CL T CL0. 300T CL5. 300M CL0. 300M CL5. 300M + BCLL11 + BCLL11 The maximum number of auxiliary contacts is four for CL00 to CL0 and six for CL03 and CL0. When using the pneumatic BTLF-block, these numbers are reduced to two, resp. four.
16 SERIES CL - Technical data Terminal numbering according to EN 5001 Without auxiliary contact blocks Combinations Final Final of auxiliary contacts structure Possible structure Possible of the basic of the basic Auxiliary contact blocks Description NO NC contactor contactors contactor contactors to be added CL5. 300T CL5. 300T Front mounting auxiliary contact blocks with one contact each 10E 1 0 CL5. 300T CL5. 300T + BCLF10. 01E E 1 1 CL5. 300T CL5. 300T CL5. 300T CL5. 300T + BCLF01 + BCLF10 + BCLF01 1E 1 CL5. 300T CL5. 300T + BCLF10 + BCLF01 + BCLF10 1E 1 CL5. 300T CL5. 300T + BCLF10 + BCLF01 + BCLF01 31E 3 1 BCLL11 + BCLF10 + BCLF01 + BCLF10 + BCLF10 1E 1 + BCLF10 + BCLF01 + BCLF10 + BCLF10 + BCLF10 E CL5. 300T CL5. 300T + BCLF10 + BCLF01 + BCLF01 + BCLF10 3E 3 + BCLF10 + BCLF01 + BCLF01 + BCLF10 + BCLF10 13E 1 3 CL5. 300T CL5. 300T + BCLF10 + BCLF01 + BCLF01 + BCLF01 3E 3 + BCLF10 + BCLF01 + BCLF01 + BCLF01 + BCLF10 Lateral mounting auxiliary contact blocks with two contacts each 11E 1 1 CL5. 300T CL5. 300T + BCLL11 31E 3 1 CL5. 300T CL5. 300T + BCLL11 + BCLL0 E CL5. 300T CL5. 300T + BCLL11 + BCLL11 The maximum number of auxiliary contacts is eight ; with BTLF : maximum six.
17 SERIES CL - Technical data Terminal numbering Three-pole and four-pole contactors Auxiliary contact blocks Front mounting Auxiliary contact blocks Lateral mounting BCLF10 BCLL0 CL00A300T to CL10A300M CL5D300T to CL5D300M CL06E300M to CL10E300M BCLF01 BCLL11 BCLF10G BRLL11 CL T to CL0. 310T CL M to CL0. 310M BCLF01G Pneumatic timer blocks BRLL0.3 BTLF. C Mechanical latch block CL T to CL0. 301T CL M to CL0. 301M BTLF. D RMFL CL5A311M to CL10A311M Electronic timer blocks BETL0C BETL5C Mechanical interlock BELA BEL BELA0 BEL0 CL00A00T tocl08a00m CL01D00T to CL0D00M CL05E00M to CL09E00M BETL0D BETL5D Interface module IMRD IMRG Voltage suppressor blocks CL5A. 310T BSLR IMSSD BSLDZ CL5. 301T BCLF01 IMRFD IMRFG CL01AB00T to CL08AB00M CL01DB00T to CL0DB00M CL05EB00M to CL08EB00M Voltage suppressor blocks for utilisation with interface modules and electronic timers IMRC IMAMS IMD1Z IMVB
18 SERIES CL - Dimensional drawings Three-pole and four-pole AC contactors A B CL00A3.. T 85 CL01A3.. T 85 CL01A.. T 85 CL0A3.. T 85 CL0A.. T 85 CL5A300T 87 CL5A310T 87 9 CL5A301T 87 9 Three-pole and four-pole DC contactors A CL00D3.. T 115 CL01D3.. T 115 CL01D.. T 115 CL0D3.. T 115 CL0D.. T CL5D300T 117. A CL03A3.. M CL03A.. M CL0A3.. M CL0A.. M CL5A300M CL5A311M 9 CL03D3.. M CL03D.. M CL0D3.. M CL0D.. M CL5D300M Three-pole AC contactors Three-pole DC contactors CL06A3.. M CL07A3.. M CL08A3.. M CL06E3.. M CL07E3.. M CL08E3.. M CL09A3.. M CL10A3.. M CL09E3.. M CL10E3.. M Four-pole AC contactors Four-pole DC contactors CL05A.. M CL07A.. M CL05AB.. M CL07AB.. M CL08AB.. M CL05E3.. M CL07E3.. M CL05EB.. M CL07EB.. M CL08EB.. M CL09A.. M CL09E.. M
19 SERIES CL - Dimensional drawings Front mounting auxiliary contact blocks Electronic timer block Voltage suppressor block CL00...CL5 CL00...CL5 BCLF Lateral mounting auxiliary contact blocks CL03...CL5 CL03...CL5 BRLL BCLL CL05...CL10 CL05...CL10.5 Pneumatic timer block BSLR BSLDZ BSLV BTL0 BTL5 BTLF Interface modules Mechanical latch block CL00...CL5 RMLF CL03...CL5 Mechanical / mechanical-electrical interlock BELA BEL BELA0 BEL0 CL05...CL10 IMR IMRF IMSSD IMAMS Electro Hamand No. / Shahid Torabi Goudarzi Str./ South Lalehzar Ave./ Tehran-Iran Tel: (+98-1) , , , , , , , Fax : (+98-1)
Standard voltages. Alternating current (V). Direct current (V) D F H J N Y Voltage For contactors type CL...
Series CL Three and four pole contactors 9 to 05 (C3) 25 to 40 (C) Contactors lternating current up to 690V Direct current up to 440V Terminal numbering in accordance with EN 50005 and EN 5002 Fixing by
More informationThe CWC0 compact contactors are offered as a complete solution for switching and controlling motors.
Compact Contactors The CWC compact contactors are offered as a complete solution for switching and controlling motors. Main Features Contactors with screw s for C-3 operation up to Contactors with spring
More informationMini Contactors. Mini Contactor Relays 4-pole 8 Auxiliary Contact Blocks. Interface Contactor Relays. Mini Contactors 10 Auxiliary Contact Blocks
Mini Contactors Mini Contactor Relays 4-pole 8 Auxiliary Contact Blocks Interface Contactor Relays Mini Contactors 10 Auxiliary Contact Blocks Mini Contactors With Fast On Tab Connectors 12 Mini Contactors
More informationTeSys contactors. TeSys D contactors. IEC/EN , IEC/EN , UL 508, CSA C22.2 n 14. Protection against direct fi nger contact IP 2X
Characteristics Contactor type LC1 D09 D18 DT20 and DT25 Environment Rated insulation voltage (Ui) Conforming to IEC 097--1, overvoltage category III, degree of pollution: 3 Conforming to UL, CSA V 00
More informationCharacteristics 5 TeSys k contactors and reversing contactors
90 Characteristics contactors k contactors and reversing contactors Environment characteristics Conforming to standards IEC 60947, NF C 63-110, VDE 0660, BS 424 Product certifications LCp and LPp K06 to
More informationOutput of three-phase motors at 50 Hz and 400 V
RT0, RH Coupling Relays (Interfaces) Description DC operation IEC 0 947 and EN 0 947 (VDE 00) The RT0 coupling relays for switching motors and RH for auxiliary circuits are laid out to the special requirements
More informationCapacitor Switching Contactors
Capacitor Switching D385E51 Technical catalogues and news under: www.benedict.at Motor-Starter Mini- Overload Relays Capacitor Switching Motor-Starters Modular Circuit Breakers M4-32T... up to 32A M4-32R..
More informationNS..S contactor relays - with spring terminals AC operated
NS..S contactor relays - with spring terminals AC operated NSES 1SBC101015F00 Description NS..S contactor relays are used for switching auxiliary and control circuits. These contactor relays are designed
More informationModular equipment. Presentation, standards. Standard contactors TeSys GC
Presentation, standards Standard contactors TeSys GC Presentation TeSys GC contactors are designed for use in modular panels and enclosures. These contactors feature: b Easy installation v quick clip-on
More informationMicro Contactors. Micro Contactor Relays 10. Micro Contactors 11. Micro Contactors With Solder Pins 12. Coil voltages 12. Micro Reversing Contactor 13
Micro Contactor Relays 10 Micro Contactors 11 Micro Contactors With Solder Pins 12 Coil voltages 12 Micro Reversing Contactor 13 Technical Data 14 Dimensions 18 D946E 9 Micro Contactor Relays 4-pole AC
More informationIndex. Capacitor Switching - 2 Contactors. Typical Circuit Diagram 2. Auxiliary Contact Blocks 2. Contactors 3. Dimensions 3. Technical Data 4,5,6
Index Index Page Capacitor Switching - 2 Contactors Typical Circuit Diagram 2 Auxiliary Contact Blocks 2 Contactors 3 Dimensions 3 Technical Data 4,5,6 Contactor operation 7 Function 8 Construction 9 Oscillogram
More informationLC1D25BL TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 25 A - 24 V DC coil
Product data sheet Characteristics LC1D25BL TeSys D contactor - 3P(3 NO) - AC-3 -
More informationLC2D09BL REVERSING CONTACTOR 575VAC 9A IEC
Product datasheet Characteristics LC2D09BL REVERSING CONTACTOR 575VAC 9A IEC Price* : 107.62 GBP Main Range Product name Product or component type Device short name Contactor application Utilisation category
More information60 Series - General purpose relays 6-10 A. Features Plug-in mount 10 A General purpose relay
Series - General purpose relays - 0 A Features Plug-in mount 0 A General purpose relay.. & pole changeover contacts Cadmium Free contacts (preferred version) AC coils & DC coils UL Listed (certain relay/socket
More informationType: DILEM 10(220V50HZ,240V60HZ) Article No.:
Type: DILEM 10(220V50HZ,240V60HZ) Article No.: 051785 Ordering information Actuating voltage Description Connection technique 380 V 400 V I e A 8.8 Max. rating for three phase motors, 50 AC 3 220 V 230
More informationType: DILEM 10 G(24VDC) Article No.:
Type: DILEM 10 G(24VDC) Article No.: 010213 Ordering information Description Connection technique Rated operational current AC 3 380 V 400 V I e A 9 Max. rating for three phase motors, 50 60 Hz AC 3 220
More informationControl relays. K mini-control relays. 2 or 4 for CA2-K and CA3-K: 2 for CA4-K. Conforming to VDE 0110 group C V 750
Characteristics Contact characteristics of mini-control relays and instantaneous contact blocks Number of contacts On CAp-K 4 On L-K 2 or 4 for C-K and CA3-K: 2 for CA4-K Rated operational voltage (Ue)
More informationCatalog 200 Contactors up to 115 A Motor Starters up to 55 kw 03/2009
Catalog 00 Contactors up to 5 A Motor Starters up to 55 kw 03/009 Kraus & Naimer The development of the Blue Line rotary switch, contactor and motor starter product ranges is based on more than hundred
More informationSeries M. Contactors. Intro. Technical data
ontactors eneral M1 M2 Rated thermal current th 60 (1) () 20 20 Rated operational current e (2) () 9 12 (3 x 440V, 50/60z, -3) Maximum number of poles 4 4 Rated insulation voltage Ui (V) 750 750 Rated
More information3 - Protection components Circuit-breakers
Contents - Protection components Circuit-breakers for the motor protection Selection guide..............................................page /2 Thermal-magnetic motor circuit-breakers Selection guide..............................................page
More informationIndustrial Controls. Catalog IC SIRIUS. Answers for industry.
Industrial Controls Catalog IC 10 2012 SIRIUS Answers for industry. Contactor Relays Siemens AG 2012 Overview Standards IEC 60947-1, EN 60947-1, IEC 60947--1, EN 60947--1 The 3TH42 and 3TH43 contactor
More informationBulletin 100S-C/104S-C Safety Contactors. Bulletin 700S-CF Safety Control Relays. Table of Contents. Selection Guide
Bulletin S-C/S-C Safety Contactors Bulletin 7S-CF Safety Control Relays Selection Guide Table of Contents Description Page Bulletin S-C/S-C Safety Contactors Product Selection.................................
More informationControls Contactors and Contactor Assemblies Special Applications
Controls Contactors and Contactor Assemblies Special Applications Price groups 1B, 1H /2 Introduction More information can be found on the Internet: see the opening information, page 13 - Contactors for
More informationArtisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
More informationUtilization category DC-1 DC-3 DC-5 L/R 1 ms L/R 2 ms L/R 7.5 ms
controls IEC Technical data D.C. Power circuit switching Utilization category DC- DC- DC- L/R ms L/R ms L/R 7. ms + + + V A 6.0 6.0 6.0 8 V A 6.0 8.0.0 60 V A 6.0.0. V A 7.0. 0. 0 V A 0.8 0. V A 6.0 6.0
More information2 Pole CO, 8 A Plug-in 2 CO (DPDT) 1 CO (SPDT) 8/15 16/25* 250/ /400 2,000 4, /0.5/ /0.5/ (5/5) 300 (10/5)
46 Series - Relays for railway applications 8-16 A 46 SERIES Features Plug-in power relays: 8 A, 2 pole 16 A, 1 pole Complies with EN 45545-2:2013 (protection against fire of materials), EN 61373 (resistance
More informationLC1D12BL TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 12 A - 24 V DC coil
Characteristics TeSys D contactor - 3P(3 NO) - AC-3 -
More informationLC1D32BD TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 32 A - 24 V DC coil
Characteristics TeSys D contactor - 3P(3 NO) - AC-3 -
More information62 Series - Power relays 16 A. Features / /
6 Series - Power relays 6 A Features 6. / 6.3 6.-0300 / 6.3-0300 Printed circuit mount 6 A Power relay & 3 Pole changeover contacts or NO ( 3 mm contact gap) AC coils & DC coils Reinforced insulation between
More informationDescription Basic devices with positive operation contacts. Standards IEC/EN 60947, EN , VDE 0660, UL, CSA
Contactor relay, 2N/O+2N/C, AC Part no. DILA-22(24V60HZ) Catalog No. 276390 Eaton Catalog No. XTRE10B22B6 Delivery program Product range DILA relays Application Contactor relays Description Basic devices
More informationLC1D32ED TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 32 A - 48 V DC coil
Product data sheet Characteristics LC1D32ED TeSys D contactor - 3P(3 NO) - AC-3 -
More informationLC2D09BD. Main. Device short name. Utilisation category. Poles description Pole contact composition
Product datasheet Characteristics Main Range Product name Product or component type Device short name Contactor application Utilisation category Device presentation Poles description Pole contact composition
More informationAC-3 AC-1 230V 400/415V 500V 690V 115V 230V 200V 230V 460V 575V N.O. N.C. Qty. Cat. No. Screw Terminals. Spring Clamp Terminals. 40 C Pkg.
Bulletin -K, -K IEC Miniature Contactors Overview/Product Selection Product Selection -Pole AC- and DC-Operated Contactors Bulletin -K/-K IEC Miniature Contactors Compact size Same dimensions for AC and
More informationType: DILM80(110V50HZ,120V60HZ) Article No.: Sales text Contactor,37kW/400V,AC operated. Ordering information
Type: DILM80(110V50HZ,120V60HZ) Article No.: 239399 Sales text Contactor,37kW/400V,AC operated Ordering information Connection technique Description Description Rated operational current AC 3 380 V 400
More informationApproved Standards. Ordering Information. Mini Contactor Relays 4-pole J7KNA-AR. Model Number Legend. Main contactor. Accessories
Mini Contactor Relays 4-pole J7KN-R ) Main contactor C & DC operated 4-, 6- and 8-pole versions in different configurations Mirror contacts Screw fixing and snap fitting (35 mm DIN rail) Rated current
More informationType: DILM95(230V50HZ,240V60HZ) Article No.: Sales text Contactor,45kW/400V,AC operated. Ordering information
Type: DILM95(230V50HZ,240V60HZ) Article No.: 239480 Sales text Contactor,45kW/400V,AC operated Ordering information Connection technique Description Description Rated operational current AC 3 380 V 400
More informationDescription Basic devices with positive operation contacts
Contactorrelay,3N/O+1N/C,DCcurrent Partno. DILA-31(24VDC) Articleno. 276379 CatalogNo. XTRE10B31TD Deliveryprogramme Product range DILA relays Application Contactor relays Description Basic devices with
More informationMotor starters. TeSys E. Designed for the essential
Motor starters TeSys E Designed for the essential Designed for the essential Contents TeSys E contactors, 6 A to 300 A TeSys E thermal overload relays 0.1 A to 333 A TeSys E control relays 4 NO/NC contacts
More information48 Series - Relay interface modules A. Features
Series - Relay interface modules 8-0 - 6 A Features & Pole relay interface modules, 5.8 mm wide. Ideal interface for PLC and electronic systems.3 - Pole 0 A.5 - Pole 8 A.6 - Pole 6 A coils or sensitive
More informationDescription Basic devices with positive operation contacts. Standards IEC/EN 60947, EN , VDE 0660, UL, CSA
DATASHEET - DILA-22(230V50HZ,240V60HZ) Delivery program Contactor relay, 2N/O+2N/C, AC Part no. DILA-22(230V50HZ,240V60HZ) Catalog No. 276399 Eaton Catalog No. XTRE10B22F EL-Nummer 0004130208 (Norway)
More informationInstructions Contact numbers to EN Coil terminal markings to EN Integrated diode-resistor combination Coil rating 2.
Delivery program Contactor relay, 2N/O+2N/C, DC current Part no. DILER-22-G(24VDC) Catalog No. 010042 Eaton Catalog No. XTRM10A22TD EL-Nummer 4130354 (Norway) Product range DILER Mini-contactors Application
More informationLC1D12BD TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 12 A - 24 V DC coil
Product data sheet Characteristics LC1D12BD TeSys D contactor - 3P(3 NO) - AC-3 -
More information48 SERIES. Relay interface modules 8 A CO forcibly guided contacts relay interface modules,15.8 mm wide Type 48.12
48 Relay interface modules 8 A 48 2 CO forcibly guided contacts relay interface modules,15.8 mm wide Type 48.12 2 CO 8 A s Relay with forcibly guided contacts according to EN 50205 Type 35 mm rail (EN
More information2 or 4 pole changeover contact Plug-in/Faston 187
56 Miniature power relays 56 Plug-in - Power relay, & 4 pole Flange mount option - (Faston 87, 4.8 x 0.5 mm termination) C coils & DC coils Lockable test button and mechanical flag indicator Cadmium Free
More informationRelay interface modules A
4C SЕRIES Relay interface modules 8-10 - 16 A Escalators Road / tunnel lighting Hoists and cranes Carousel warehouses Control panels Panels for electrical distribution FINDER reserves the right to alter
More informationE-STOP relays, safety gate monitors
Safety relay for monitoring E-STOP pushbuttons, safety gates and light barriers. Approvals Unit features Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C),
More information58 SERIES. Relay interface modules 7-10 A 58.P3 58.P4
58 58 3 & 4 CO relay interface modules, 31 mm wide with Push-in terminals Ideal interface for PLC and electronic systems 58.P3 58.P4 Type 58.P3 3 CO 10 A Push-in terminals Type 58.P4 4 CO 7 A Push-in terminals
More informationTeSys circuit-breakers Thermal-magnetic motor circuit-breakers types GV2, GV3 and GV7
Presentation Thermal-magnetic motor circuit-breakers types GV, GV and GV7 GV-ME, GV-P, GV-ME and GV7-R motor circuit-breakers are -pole thermal-magnetic circuit-breakers specifically designed for the control
More informationContactors and Contactor Assemblies
s for Switching Motors Technical data General data Permissible mounting position The contactors are designed for operation on a vertical mounting surface. C and DC operation S3 3RT14 46 For DC operation
More informationPKZ 2 Manual Motor Protectors Technical Data
08/066 PKZ 2 Manual Motor Protectors General Standards UL 508, CSA C 22.2 No. 14, IEC/EN 60 947, VDE 0660 GL, LR, DNV, PRS, BV, RINA, RS, EZU, MEEI Climatic proofing Damp heat, constant, to IEC 60 068-2-3
More informationMini contactors B 6 and B 7 Mini contactor relays K.. Compact reversing contactors VB.. Thermal overload relay T 7 DU
/0 Mini contactors B and B 7 Mini contactor relays K.. Compact reversing contactors VB.. Thermal overload relay T 7 DU Contents Mini Contactors B, BC, B 7, BC 7 Ordering Details... /2 Compact Reversing
More informationControl stations and enclosures Pendant control stations, for control circuits Double insulated or metal, types XAC-B and XAC-M
Characteristics Pendant control stations, for control circuits Environment Conforming to standards IEC 947-5-1, EN 60947-5-1 XAC-B : standard version : NEMKO, CSA 300 V type 4 Approvals XAC-M : standard
More informationDescription Basic devices with positive operation contacts. Connection to SmartWire-DT yes in conjunction with DIL-SWD SmartWire DT contactor module
DATASHEET - DILA-22(24VDC) Delivery program Contactor relay, 2N/O+2N/C, DC current Part no. DILA-22(24VDC) Catalog No. 276414 Eaton Catalog No. XTRE10B22TD EL-Nummer 4130211 (Norway) Product range DILA
More informationPendant control stations 6
Characteristics 6 Environment Conformity to standards IEC 97-5-1, EN 6097-5-1 Product certifications NEMKO. Special version: UL Listed A600-Q600, CSA A600-Q600 Protective treatment Standard version TH
More information40 Series - Miniature P.C.B. Relays A
..4..4..4 40 Series - Miniature P.C.B. Relays 8-0 - 6 A - P.C.B. or plug-in mount - AC, DC, sensitive DC or single bistable coil versions available - 8 mm, 6 kv (./0 µs) between coil and contacts - Ambient
More information3.5 mm contact pin pitch 1 Pole 12 A PCB direct or via socket
41 Series - Low profile PCB relays 8-12 - 16 A Features 41.31 41.52 41.61 1 & 2 Pole - Low profile (15.7 mm height) 41.31-1 Pole 12 A (3.5 mm pin pitch) 41.52-2 Pole 8 A (5 mm pin pitch) 41.61-1 Pole 16
More informationMiniature circuit-breakers S 280 UC series. System pro M. Technical data
Technical data 11 Robbie Rd. / Avon, MA 02322 T:(508)513-1000 F:(508)513-1100 70 Ernest St. / Providence, RI 02905 T:(401)781-7100 www.controllerservice.com System pro M Prior to connection of aluminum
More informationStep relays 10 A SЕRIES. Lighting control in corridors (for hotels, offices and hospitals) Bedroom light control. Living room light control
Lighting control in corridors (for hotels, offices and hospitals) Bedroom light control Living room light control SЕRIES FINDER reserves the right to alter characteristics at any time without notice. FINDER
More informationMeasuring and monitoring relays CM-SRS.1 Current monitoring relays, single-phase AC/DC
2CDC 251 244 F0t05 Characteristics Monitoring of DC and AC currents: RMS measuring principle One device includes 3 measuring ranges Over- or undercurrent monitoring configurable Hysteresis adjustable from
More informationComponents for safety applications
Metal, turret head, types CS-A, CS-C and CS-E Double insulated, turret head, types CS-PA, CS-TA and CS-TE Presentation Metal, types CS-A, CS-C, CS-E Switches with or without locking of the actuator Pages
More informationBlock Contactors. Contents. Panorama 3-pole Contactors... 2/2 4-pole Contactors... 2/4
/0 Block Contactors Contents Panorama -pole Contactors... / 4-pole Contactors... /4 -pole Contactors: Description and Ordering Details A 9... A 0 Contactors (a.c. Operated)... /6 A 4... AF 60 Contactors
More information62.22 Copper side view
62 Power relays 16 62 Printed circuit mount 16 Power relay 2 & 3 Pole changeover contacts or NO ( 3 mm contact gap) C coils & DC coils Reinforced insulation between coil and contacts according to EN 60335-1,
More informationInstallation and Operational Instructions for ROBA -switch Type 017._00.2
OBA -switch Type 017._00.2 Guidelines on the Declaration of Conformity A conformity evaluation has been carried out for the product in terms of the EC Low Voltage Directive 2014/35/ EC and the EMC Directive
More informationAF AF V50/60HZ-DC Contactor. General Information. Ordering. Popular Downloads. Dimensions. Technical AF
ABB AF12-30-01-14 250-500V50/60HZ-DC Contactor General Information Extended Product Type Product ID AF12-30-01-14 1SBL157001R1401 EAN 3471523110441 Catalog Description Long Description AF12-30-01-14 250-500V50/60HZ-DC
More information83 Series - Modular timers 16 A. Features
Features 83 Series - Modular timers 16 A 83.11 Multi-function and mono-function timer range - Multi-function & multi-voltage 83.11 - delay, multi-voltage 22.5 mm wide Six time scales from 0.1s to 20h High
More information38 Series - Relay interface modules A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical Relays
More information38 Series - Relay interface modules A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit 6.2 mm wide EMR - DC, AC or AC/DC
More informationDATASHEET - ETR4-70-A. Delivery program. Timing relay, 2W, 0.05s-100h, multi-function, VAC/DC, potentiometer connection
DATASHEET - ETR4-70-A Delivery program Timing relay, 2W, 0.05s-100h, multi-function, 24-240VAC/DC, potentiometer connection Part no. ETR4-70-A Catalog No. 031888 Eaton Catalog No. XTTR6A100H70B EL-Nummer
More informationModular step relays 16 A
Automation for blinds, grilles and shutters Lighting control in corridors (for hotels, offices and hospitals) Bedroom light control Living room light control SЕRIES FINDER reserves the right to alter characteristics
More informationPhase control Single function phase control relay - 7.5 mm Control of -phase networks: phase sequence, total phase failure Multi-voltage from x 08 to x 480 V Controls its own supply voltage True RMS measurement
More informationXT IEC Power Control Miniature Controls
Product Family Overview May 07 Contents Description Page Selection................ Product Selection.......... Non-reversing Mini Contactors......... Reversing Mini Contactors............. Star-Delta (Wye-Delta)
More informationCircuit Breakers. Excerpt from Master Catalogue. Circuit Breakers. Specifically For You
Circuit Breakers Excerpt from Master Catalogue Circuit Breakers Specifically For You Hydraulic-magnetic technology ensures reduced nuisance tripping with temperature variance Always holds 00% rated current
More informationitl impulse relays IEC/EN itls: IEC/EN itls b Allows remote indication of its operating state (open/closed)
DB123399 DB116619 Country approval pictograms itl, itli, itls, itlc, itlm IEC/EN 60669-2-2 itls: IEC/EN 60947-5-1 Impulse relays B106126-34 B106128-34 itl b The impulse relays are used to control, by means
More informationDATASHEET - ETR4-51-A. Delivery program. Technical data General. Timing relay, star-delta, 50 ms, 1W, 3-60s, VAC/DC
DATASHEET - ETR4-51-A Timing relay, star-delta, 50 ms, 1W, 3-60s, 24-240VAC/DC Part no. ETR4-51-A Catalog No. 031884 Eaton Catalog No. XTTR6A60S51B EL-Nummer 0004133308 (Norway) Delivery program Product
More information3RH1 contactor relays, 4- and 8-pole
Siemens AG 2010 RH, TH Contactor Relays RH1 contactor relays, 4- and 8-pole Overview AC and DC operation IEC 60947, EN 60947. The RH1 contactor relays are suitable for use in any climate. They are finger-safe
More informationType CP-S, CP-C & CP-A Switch mode
Switch mode power CP-S, CP-C & CP-A Switch mode Characteristics CP-S and CP-C range Output current 5 A, 10 A and 20 A Integrated power reserve of up to 50 % 5 A and 10 A devices with pluggable connecting
More informationVoltage monitoring relay CM-EFS.2 For single-phase AC/DC voltages
Data sheet Voltage monitoring relay CM-EFS.2 For single-phase AC/DC voltages The CM-EFS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
More informationInstallation / Monitoring Technique
Installation / Monitoring Technique VARIMETER RCM Residual Current Monitor, Type B for AC and DC Systems IP 5883 0249633 IP 5883 ND 5018/035 ND 5018/030 According to IEC/EN 62 020, VDE 0663 For AC and
More informationCurrent monitoring relays CM-SRS.2 for single-phase AC/DC currents
Data sheet Current monitoring relays CM-SRS.2 for single-phase AC/DC currents For the monitoring of currents in single-phase AC/DC systems, ABB s CM range comprises a wide selection of powerful and compact
More informationPTC-resistor relay type MS 220 K and MSR 220 K PTC-resistor trip device
MINIPAN digital panel meters, temperature- and mains controlling, special purpose instruments for customer requirements www.ziehl.com Operating manual PTC-resistor relay type MS 220 K and MSR 220 K PTC-resistor
More information38 SERIES. Relay interface modules A. EMR Electromechanical Relays. Common features. SSR Solid State Relays. 6.
38 Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit 6.2 mm wide EMR - DC, AC or AC/DC
More informationLow profile safety relay with forcibly guided double contacts FEATURES. Relay height, 14.5mm. 4a2b
Low profile safety relay with forcibly guided double contacts SFN4D RELAY 3.3 33.0 FEATURES Relay complies with EN 020, Type B. Polarized magnet system with snap action function Tolerance ±0.3 mm Weight
More information3RF A A 0 2. Switching function. Control voltage Operating voltage with heat sink 10 = 10.5 A. A = Zero-point switching
Main Characteristics: Zero-point switching LED display Various connection technologies Plug-in control terminal Degree of protection IP 2 Insulated mounting foot Standards / Approvals: DIN EN 697--3 UL
More informationV2IM10AL10 Art.Nr.: V2IM10AL10P Art.Nr.: Control element. Tripping delay. Function selector. Status indication 24...
P AC/DC current monitoring Multifunction Supply voltage 24-240V DC or 110-240V AC 1 change-over contact Width 22,5 mm Control element Tripping delay Maximum threshold Minimum threshold Function selector
More informationTechnical features table for miniature circuit-breakers SH 200 Series
Technical features table for miniature circuit-breakers SH 00 Series Standards Poles Tripping characteristics I n A frequency f Hz insulation voltage U i acc. to IEC/EN 60664-1 V Overvoltage category Pollution
More informationRatings for Switching AC Motors AC-2, AC-3, AC / /
Bulletin -C/-C Overview/Product Selection Product Selection -Pole AC- and DC-Operated Contactors Ie [A] Bulletin -C/-C Compact sizes from kw/ Hp ( A) AC and DC coil control Common accessories for all contactor
More informationFor non-electrical quantities
Controlgear 3UG3 monitoring relays 3RS17 interface converters N nsb0346h nsb0348h nsb0775h For electrical quantities For non-electrical quantities 3RS17 interface converter Selection and ordering data
More informationType: DILM40(RDC24) Article No.:
Type: DILM40(RDC24) Article No.: 277780 Ordering information Rated operational current AC 3 400 V I e A 40 Max. rating for three phase motors, 50 60 Hz AC 3 230 V Max. rating for three phase motors, 50
More informationRelays & Sockets. RF1V Force Guided Relays/SF1V Relay Sockets. Certification Organization/ File Number. UL/c-UL File No.
RFV Key features: Compact and EN compliant RFV force guided relays Force guided contact mechanism (EN00 Type A TÜV approved) Contact configuration -pole (NO-NC, 3NO-NC) 6-pole (NO-NC, NO-NC, 3NO-3NC) Built-in
More information38 Series - Relay Interface Modules A
Series - Relay Interface Modules 0.1-2 - 6 A - Relay interface modules for use with PLC systems, mm wide - Sensitive DC coil or AC/DC coil version - Supplied with integral coil - Instant removal of relay
More information38 Series - Relay interface modules A. Features /
Series - Relay interface modules 0.1-2 - 6-8 A Features 1 Pole - 6 A electromechanical relay interface modules, 6.2 mm wide. Ideal interface for PLC and electronic systems Sensitive DC coil or coil versions
More informations s s 3-60 s min min 3-60 min h h 3-60 h V AC, 50/60 Hz
HPL11002EN DILETTiming relays Rated operational current AC-11 230 V 400 V I th I e I e A A A A A Conventional thermal current Time Range Voltage Article No. See price list Std. pack On-delayed Timing functions
More informationMicro-Contactors LAM ONLINE SHOPPING! Get Ready. Get Schrack. In the office and on the go with the Live Phone App.
Micro-Contactors LAM The contactor, as small as a relay the smallest in the world 3mm contact clearance acc. IEC60335-1 for safety-related applications Reversing contactors with mechanical interlock ONLINE
More informationRE7CP13BU adjustable symmetrical flashing relay s - 24 V AC DC - 2OC
Characteristics adjustable symmetrical flashing relay - 0.05..1 s - 24 V AC DC - 2OC Price* : 202.00 USD Discontinued Main Range of product Product or component type Contacts type and composition Component
More informationSwitching Devices Contactors and Contactor Assemblies for Switching Motors
Switching Devices Contactors and Contactor Assemblies for Switching Motors groups 41B, 41H / Introduction Power contactors for switching motors /5 General data /11 SIRIUS RT10 contactors, -pole,... 50
More informationBreakcontact,Front. Articleno Deliveryprogramme. Product range RMQ-Titan (drilling dimensions 22.5 mm) Basic function Accessories
Breakcontact,Front Partno. M22-K01 Articleno. 216378 Deliveryprogramme Product range RMQ-Titan (drilling dimensions 22.5 mm) Basic function Accessories Standard/Approval UL/CSA, IEC Construction size NZM1/2/3/4
More informationNSD Safety Mat Controller Modules Both Modules are compliant to OSHA & ANSI Standards - EN ISO EN EN 81-1 EN NSD VDC
Datasheet NSD Safety Mat Controller Modules Both Modules are compliant to OSHA & ANSI Standards - EN ISO 13849-1 EN 62061 EN 81-1 EN 50156-1 Approvals NSD-3580 24 VDC NSD-3590 115 TO 230 VAC Technical
More informationSIRCO M UL98 Load break switches standards UL and CSA 30 to 100 A
The solution for Load break switches > Power distribution. sircm_100_a_1_cat Rotary switch SIRCO M 3 x 100 A Strong points > Total integration. > Wide range of accessories. > Upgradeability. > Compliance
More informationInstallation and Operational Instructions for ROBA -multiswitch Type 019._00.2
Guidelines on the Declaration of Conformity A conformity evaluation has been carried out for the product in terms of the EU Low Voltage Directive 2014/35/ EU and the Electromagnetic Compatibility (EMC)
More informationMulti-voltage Multi-function. Wiring diagram (without control signal)
80 Modular timers 16 A 80 Multi-function and mono-function timer range 80.01T - Multi-function & multi-voltage 80.11T - On-delay, multi-voltage Complies with EN 45545-2:2013 (protection against fire of
More information