Series M. Contactors. Intro. Technical data

Transcription

1 ontactors eneral M1 M2 Rated thermal current th 60 (1) () Rated operational current e (2) () 9 12 (3 x 440V, 50/60z, -3) Maximum number of poles 4 4 Rated insulation voltage Ui (V) Rated operational voltage Ue (V) (1) nsulated terminal type 28 x 08 with wire 1mm 2 : e = 8, design N (2) Max operational current 3, 3 -phase 440V, according to onformity to standards /N /N /N N N N S 222/14 NL 419 V 0660 N S 4794 SV JS 8325 JM 1038 NM S-1 UL 508 Shock resistance ( ) ontinuously closed (at 08Us) dmissible acceleration 25g mpulse duration 11 ms ontinuously opened (no voltage) dmissible acceleration 20g mpulse duration 11 ms Vibration resistance ( ) ontinuously closed (at 08Us) dmissible acceleration 15g Sweep between z ontinuously opened (no voltage) dmissible acceleration 5g () - 35g () Sweep between z Mounting positions ntro pprovals culus NMKO SMKO ST MKO RN MQ Lloyd s Register ureau Veritas mbient conditions Storage temperature -55º to +80º Operation temperature -40º to +55º ltitude up to 3000m Nominal values from 3000 up to 4000m 90%e 80%Ue from 4000 up to 5000m 80%e 75%Ue limatic resistance ontinuous tests 40 / 125 / 56 old (72h) Temperature -40º ry heat (96h) Temperature +125º Relative humidity < 50% umid heat (56h) Temperature +40º Relative humidity 95% yclic tests irst half-cycle (12h) Low temperature +25º Relative humidity 93% Second half-cycle (12h) Low temperature +55º Relative humidity 95% Number of consecutive cycles 6 With the same pick-up and drop-out voltage With the same rated power -7% of connection voltage +4% of disconnection voltage With the same rated power 7% of connection voltage +4% of disconnection voltage With the same rated power Terminal capacity Terminal with M35 screw Tightening torque (with pozidrive head and safety flange) 08Nm - 7 Lb/in Solid wire mm to 2 x 2 w lexible wire without terminal mm to 25 x 2 w lexible wire without terminal with cap mm to 25 x 1 w mm to 1 x 2 w Ring terminal 08Nm - 7 Lb/in aston terminal 28-2 insulated terminals mm 2 1 x 2w Terminal for printed circuit (Ø of P hole) 18mm Ring terminal cap 78mm ork terminal cap 65 mm 84

2 ontrol circuit M _ M _ M _ M _ K M _ W Rated insulation voltage (Ui) (V) Standard voltages (Us) 50z (V) z (V) (V) Operating voltages limits Operating (1) xus rop-out xus Operating voltages limits with coil 50/60z Operating xus rop-out xus onsumption 50 or 60z - monofrequency coil Pick-up (V) 26 Seal (V) 4 50/60z - bifrequency coil Pick-up (V) 32 Seal (V) 6 (W) Power factor Magnetic circuit open (cos ) 08 Magnetic circuit closed (cos ) 035 Power dissipation (W) Opening and closing times Values between ±%Us % Time on energisation NO (ms) Time on de-energisation N (ms) Time on energisation N (ms) Time on de-energisation NO (ms) Values at Us Time on excitation NO (ms) Time on desexcitation N (ms) Time on excitation N (ms) Time on desexcitation NO (ms) Maximum time without voltage (ms) Mechanical endurance Monofrequency coil 10 6 ops >15 ifrequency coil 10 6 ops > ops Maximum rate No load Monofrequency coil ops/h 9000 ifrequency coil ops/h 3600 ops/h and 3 (at rated power) ops/h (at rated power) ops/h ntro 85

3 ontactors ntro Main circuit (poles) M1 Rated insulation voltage (Ui) (V) (acc 947-4) Rated thermal current (lth) () º (1) requency limits (z) Making capacity (rms) Ue 690V 50/60z () reaking capacity (rms) Ue 440V () Ue = 500V () Ue = 690V () Short-time current 03 sec () sec () sec () sec () sec () min () min () Recovery time min Protec against short-circuits ( 947-4) w/o TOR oordination type 1 gl/g () oordination type 2 gl/g () w/o welding contacts gl/g () ircuit breaker rating (curve 191) mpedance per pole (m ) Power dissipation per pole 1 (W) (W) nsulation resistance etween adjacent poles (M ) > 10 > 10 etween pole and earth (M ) > 10 > 10 etween input and output (M ) > 10 > 10 uaranteed no overlap between NO and N contacts Space (mm) 1 1 Time (ms) > 2 > 2 (1) nsulated terminal type 28 x 08 with wire 1mm 2 e = 8 acc to N M2 lectrical endurance ategory 1 Number of operations ategory 3 Number of operations Standard motor power ategory 4 Number of operations M0 M1 M2 M0 M1 M2 M0 M1/M2 Standard motor power 86

4 nternal auxiliary contacts characteristics M1 / M2 Rated insulation voltage (Ui) (V) 750 Rated thermal current (th) 60º (1) () 16 Making capacity according with Ue z () 160 Ue 440V () 160 reaking capacity (rms) Ue 440V / 50-60z () Ue 110V () 3 Ue = 220V () 12 Ue = 48V () 10 Minimum operational power (operational safety) 5m, 17V Short-circuit protection () 10 (maxclass gl fuse) w/o welding nsulation resistance etween adjacent contacts (M ) > 10 etween contacts and earth (M ) > 10 etween input and output (M ) > 10 uaranteed no overlap between NO and N contacts Space (mm) 0,5 Minimal time (ms) > 2 mpedance (m ) 23 Terminal capacity Same as main circuit (1) nsulated terminal type 28 x 08 with wire 1mm 2 e = 8 acc with N nductive circuit -13 L/R 15 ms lectrical endurance 10 6 ops nductive circuit -13 L/R 1ms lectrical endurance 10 6 ops ntro characteristics Operation -15 lectrical endurance 87

5 nstantaneous auxiliary contact blocks characteristics MN, ML ontactors ntro Rated insulation voltage (Ui) acc (V) 750 Rated thermal current (th) 60º (1) () 10 Making capacity (rms) according with /N Ue 220V 50/60z () 73 Ue = 380V 50/60z () 38 Ue = 690V 50/60z () Ue 100V () 26 L/R=100ms Ue = 220V () 1 Ue = 440V () 06 reaking capacity (rms) acc /N Ue 220V 50/60z () 73 Ue = 380V 50/60z () 38 Ue = 690V 50/60z () Ue 100V () 2 LR=100ms Ue = 220V () 0,8 Ue = 440V () 04 Rated voltage and rated current Ue-e -15 according to V V V V V - 1 according to UL, S according to V V V V V - 01 according to UL, S Q600 Minimum operational power (operational safety) 5 m, 17V Short-circuit protection () 10 (max class gl fuse) w/o welding nsulation resistance etween adjacent contacts (M ) > 10 etween contacts an earth (M ) > 10 etween input and output (M ) > 10 uaranteed no overlap between NO and N contacts Space (mm) 0,5 Minimal time (ms) > 2 mpedance (m ) 24 Terminal capacity Same as main circuit (1) nsulated terminal type 28 x 08 with wire 1mm 2 e = 8 acc with N nductive circuit -13 L/R 100ms lectrical endurance 10 6 ops nductive circuit -13 L/R 15 ms lectrical endurance 10 6 ops characteristics nductive circuit -13 L/R 1ms lectrical endurance 10 6 ops Operation -15 lectrical endurance 88

6 lectronic timer block MR Rated insulation voltage (Ui) (V) 750 Rated thermal current (th) 60º (1) () 055 Supply voltage ( and ) (V) 24 to 250 Operating limits 080 to 11 Us (085 to 11 Us to 12V) Voltage drop (V) < 3 Maximum load current at : 20º () 09 40º () º () 055 Minimum load for safe operation () > 10 Maximum current () 10 per 40ms Leakage current at 220V (m) < 5 Operational current -15 () () 09 Timing range (delay ON) (s) 05 to 60 (± 6s) Rearrangement time (ms) < 100 Repeatibility (accuracy) (%) ± 1 mbient temperature storage (º) 55 to + 80 operation (º) 5 to + 60 egree of protection P20 Mounting positions ny Terminals: 2 free cables 1mm 2 (W 17) 250mm ntro ontact sequence Main Main uxiliary uxiliary contact (NO) contact (N) contact (NO) contact (N) Three-pole minicontactor M M301 our-pole minicontactor M400 M M uxiliary contact block M MR

7 Terminal numbering in accordance with N inal structure of the contactor uxiliary contactors ombination Possible basic contactors + uxiliary contact blocks to be added escription NO N Without auxiliary contact blocks M_ M_310 uxiliary contact blocks front mounted with two or four contacts M_310 + MN211 ontactors M_310 + MN211 M_310 + MN202 M_310 + MN431 ntro M_310 + MN M_310 + MN422 M_310 + MN M_310 + MN413 uxiliary contact blocks lateral mounted with one contact M_310 + MN M_310 + ML M_310 + ML101 + ML M_310 + ML101 + ML101 90

8 Wiring diagrams ase four-pole contactors (N 50005) asic three-pole contactors (N 50012) M 400 _ M 00 _ M 310 _ M 301 _ M 00 _ M 00 _ nstantaneous auxiliary contact blocks (N 50012) ML110 _ ML101 _ MN211_ MN202_ MN431_ MN422_ nstantaneous auxiliary contact blocks (N 50005) MRL110_ MRL101_ MRL110_S MN413_ nstantaneous auxiliary contact blocks (N 50005) MRL110_S MRL101_S MRN220_ MRL101_S MRN220_ MRN211_ MRN202_ MRN440_ MRN431_ MRN422_ MRN413_ MRN404_ ntro MRN211_ MRN202_ MRN440_ MRN431_ MRN422_ MRN413_ MRN404_ Voltage suppressor block MP0 _ MP03 MP04 91