RT series Miniature Printed Circuit Board Relays, Sockets and Accessories
|
|
- Bruce Willis
- 5 years ago
- Views:
Transcription
1 RT series Miniature Printed Circuit oard Relays, Sockets and ccessories
2 pplied Coil Voltage (% of rated nom.) RT series (DC Coil) 6 mp PC oard Miniature Relay Meets VDE 0mm Spacing, KV Dielectric File E7 File LR734 NR 606 Features SPST through DPDT contact arrangements. Immersion cleanable and flux tight versions available. VDE 0mm spacing, kv dielectric, coil to contacts. UL Class F coil insulation system. Conforms to UL 8, 873, 33 and 9. Low profile;.7mm height. Sensitive coil; 400mW. Withstand surge voltage of 0,000V. Contact Data rrangements: Form (SPST-NO) Wiring Diagram Code, 3. Form (DPST-NO) Wiring Diagram Code. Form C (SPDT) Wiring Diagram Code, 3. Form C (DPDT) Wiring Diagram Code. Material: Silver-nickel 90/0. Minimum Load: V/00m. Expected Mechanical Life: 0 million operations. Initial Contact Resistance: 00 milliohms VDC. Designed to meet UL/CS/VDE ratings with relay properly vented. Remove vent nib after soldering and cleaning. UL/CS/VDE C 77VC Resistive/GP 00K 30VDC Resistive 00K VC Resistive/GP 30K 30VDC Resistive 30K 3/4 480VC* Motor 6K / 40VC* Motor 6K /3 0VC* Motor 6K 48 LR/0 40VC* Motor 30K 0VC* Tungsten K 300, 40VC* Pilot Duty 30K 3 VC Resistive/GP K 77VC Resistive/GP 30K 4VDC Resistive 30K 30VDC Resistive 30K 480VC* Motor 6K 40VC* Motor 6K / 0VC* Motor 6K 60 LR/0 VC* Motor 30K 0VC* Tungsten K 300, 40VC* Pilot Duty 30K 300, 40VC** Pilot Duty 30K 77VC Resistive/GP 00K 30VDC Resistive 00K VC Resistive/GP 30K 30VDC Resistive 30K / 40VC* Motor 6K /4 0VC* Motor 6K 34.8 LR/6 0VC* Motor 30K 7.4 LR/ 40VC* Motor 30K 300, 40VC* Pilot Duty 30K Tungsten K * Form only ** Form only Coil C Voltage: to 48VDC. Nominal C: 400mW. Duty Cycle: Continuous. Initial Insulation Resistance: 0,000 megohms, min., at C, 0VDC and % rel. humidity. Coil C DC Must Nominal Nominal Resistance Operate Coil Voltage in Ohms Voltage Current VC ±0% VC (m) /60Hz , , Max. mbient Temp. vs. Coil Voltage Max. llowable mbient Temp. ( C) : Coil temperature = mbient temperature. : 0% of nominal coil voltage at rated contact load. Operate C Must Operate Voltage(DC): 70% of nominal. Must Release Voltage(DC): 0% of nominal. Operate Time (Excluding ounce): 7 ms, typ., ms max. at nom. voltage. Release Time (Excluding ounce): 3 ms, typ., 6ms max. at nom. voltage Environmental Data Temperature Range: Storage: -40 C to +0 C. Operating: -40 C to +8 C at rated current. Vibration, Operational N.O.:0.06 (.6mm) max. excursions from 0 - Hz: N.C.:0.03 (0.8mm) max. excursions from 0 - Hz: with no contact opening >0µs Initial Dielectric Strength etween Open Contacts: >,000VC ( minute). etween Poles (code ): >,0VC ( minute). etween Coil and Contacts: >,000VC ( minute). Surge Voltage (DC): >0,000VC x (. x µsec). Mechanical Data Termination: Printed circuit terminals. Enclosures: RT, 3, 4: Flux-tight, top vented, plastic case. RT, D, E: Immersion cleanable, plastic case. Weight: 0.3 oz. (0g) approximately.
3 Ordering Information (DC Coil Models) Typical Part Number RT F. asic Series: RT = Miniature, printed circuit board relay.. Enclosure: = pole, Pinning 3.mm, flux-tight (Code ). = pole, Pinning 3.mm, sealed (Code ). 3 = pole 6, Pinning mm, flux-tight (Code 3). D = pole 6, Pinning mm, sealed (Code 3). 4 = pole 8, Pinning mm, flux-tight (Code ). E = pole 8, Pinning mm, sealed (Code ). 3. Contact rrangement: = Form C (SPDT) (Requires wiring diagram codes or 3.) = Form C (DPDT) (Requires wiring diagram code.) 3 = Form (SPST-NO) (Requires wiring diagram codes or 3.) 4 = Form (DPST-NO) (Requires wiring diagram code.) 4. Contact Material: 4 = Silver-nickel 90/0 (standard stock).. Coil Voltage: 00 = VDC 009 = 9VDC 08 = 8VDC 048 = 48VDC 006 = 6VDC 0 = VDC 04 = 4VDC. Coil Insulation Classification F = UL Class F, Siemens rand Leave lank = UL Class, Schrack rand Stock Items RT40F RT404F RT400F RT40F RT404F RT340F RT3404F RT340F RT3404F RTD400F RTD40F RTD404F RTD340F RT440F RT4404F RTE400F RTE40F RTE404F RTE440F RTE4404F Outline Dimensions reaking Capacity.6 (.7).7 (4.3).4 (9). (.7) 6X.03 X.00 (.80 X.) X.00 X.00 (. X.) Pole Pole PC oard Layouts (ottom View) Pole 3.mm.76 (7.0).300 (7.6).800 (0.3) Pole 6 Pole 8 mm.400 (6).300 (7.6).800 (0.3) : 6 Version. : Version. : Contact. : Contacts in series. Contact Life for Resistive C Load (Typical) Operations : 8 Model : Model C: 6 Model C Code Code 3 & Note: On single throw models, only necessary terminals are present. Wiring Diagrams (ottom View) Pole Pole 6 Pole reaking Capacity (kv) Note: Data from 70 C. Code Code 3 Code Note: On single throw models, only necessary terminals are present.
4 pplied Coil Voltage (% of rated nom.) RT series (C Coil) 6 mp Miniature Printed Circuit oard Relay Meets VDE 0mm Spacing, KV Dielectric File E3889 File LR438 NR 606 Features SPST through DPDT contact arrangements. Immersion cleanable and flux tight versions available. Meets VDE 0mm spacing, kv dielectric, coil to contacts. Conforms to UL 8, 873 and 33. Contact Data rrangements: Form (SPST-NO) Wiring Diagram Code, 3. Form (DPST-NO) Wiring Diagram Code. Form C (SPDT) Wiring Diagram Code, 3. Form C (DPDT) Wiring Diagram Code. Material: Silver-nickel 90/0. Minimum Load: V/00m. Expected Mechanical Life: 0 million operations. Designed to meet UL/CS/VDE ratings with relay properly vented. Remove vent nib after soldering and cleaning. UL/CS C: 40VC GP 30K 40VC Resistive/GP 00K 8VDC Resistive 30K 40VC* Motor 6K / 0VC* Motor 6K 8VDC* Resistive 30K 300 Pilot Duty 6K 3 40VC GP 6K 8VDC Resistive 30K / 0VC* Motor 6K 40VC* Motor 6K 48 LR, 8 40VC Motor 30K 300 Pilot Duty 6K 40VC Resistive 30K 8VDC Resistive/GP 30K / 40VC Motor 6K /4 0VC Motor 6K 300 Pilot Duty 6K * Form only VDE VC Resistive VC Resistive 00K 3 VC Resistive 0K VC Resistive K VC Resistive 30K VC Resistive K Coil 0 C Voltage: 4,, 30VC. Nominal C:.7V. Duty Cycle: Continuous. Initial Insulation Resistance: 0,000 megohms, min., at 0 C, 0VDC and % rel. humidity.. Coil Data DC Must Nominal Nominal Nominal Resistance Operate Drop-out Coil Coil Voltage in Ohms Voltage Voltage Current Current VC ±0% VC VC (m) Hz. (m) 60Hz , , Max. mbient Temp. vs. Coil Voltage Operate Data Max. llowable mbient Temp. ( C) : Coil temperature = mbient temperature. : 0% of nominal coil voltage at rated contact load. Must Operate Voltage: See coil data. Operate Time (Excluding ounce): 8 ms, typ., at nom. voltage. Release Time (Excluding ounce): ms, typ., at nom. voltage. Environmental Data Temperature Range: Storage: -40 C to +0 C. Operating: -40 C to +70 C at rated current. Vibration: 30 - Hz: at 0g with no contact opening >0µs on the N.O. contact; at g with no contact opening >0µs on the N.C. contact. Initial Dielectric Strength etween Open Contacts: >,000VC ( minute). etween Poles (code ): >,0VC ( minute). etween Coil and Contacts: >,000VC ( minute). Creepage/Clearance, Coil to Contact: 0/0mm. Mechanical Data Termination: Printed circuit terminals. Enclosures: RT, 3, 4: Flux-tight, top vented, plastic case. RT, D, E: Immersion cleanable, plastic case. Weight: 0.4 oz. (g) approximately.
5 Ordering Information (C Coil Model) Typical Part Number RT D 4 4. asic Series: RT = Miniature, printed circuit board relay.. Enclosure: = pole, Pinning 3.mm, flux-tight (Code ). = pole, Pinning 3.mm, sealed (Code ). 3 = pole 6, Pinning mm, flux-tight (Code 3). D = pole 6, Pinning mm, sealed (Code 3). 4 = pole 8, Pinning mm, flux-tight (Code ). E = pole 8, Pinning mm, sealed (Code ). 3. Contact rrangement: = Form C (SPDT) (Requires wiring diagram codes or 3.) = Form C (DPDT) (Requires wiring diagram code.) 3 = Form (SPST-NO) (Requires wiring diagram codes or 3.) 4 = Form (DPST-NO) (Requires wiring diagram code.) 4. Contact Material: 4 = Silver-nickel 90/0.. Coil Voltage: 4 = 4VC 730 = 30VC 6 = VC Stock Items RT44 RT46 RT4730 RTD44 RTD46 RTD4730 RTE44 RTE46 RTE4730 Outline Dimensions reaking Capacity.6 (.7). (.7) Pole Pole.7 (4.3).4 (9) 6X.03 X.00 (.80 X.) X.00 X.00 (. X.) PC oard Layouts (ottom View) Pole 3.mm.76 (7.0).96 (7.).788 (0.0) Wiring Diagrams (ottom View) Pole 6 Pole 8 mm.394 (0.0).96 (7.) Code Code 3 & Note: On single throw models, only necessary terminals are present..788 (0.0) : 6 Version. : Version. Contact Life for Resistive C Load (Typical) Operations reaking Capacity (kv) Note: Data from 70 C. : 8 Model : Model C: 6 Model C : Contact. : Contacts in series. Pole Pole 6 Pole 8 Code Code 3 Code Note: On single throw models, only necessary terminals are present.
6 RT series (Latching) 6 mp Miniature Printed Circuit oard Relay Meets VDE 0mm Spacing, KV Dielectric File E3889 File LR438 NR 606 Features Latching relay with or coils. SPDT (6) and DPDT (8) contact arrangements. Flux tight enclosure. Meets VDE 0mm spacing, kv dielectric, coil to contacts. Conforms to UL 8, 873 and 33. Contact Data rrangements: Form C (SPDT) Wiring Diagram Code 3. Form C (DPDT) Wiring Diagram Code. Material: Silver-nickel 90/0. Minimum Load: V/00m. Expected Mechanical Life: million operations, pole. million operations, pole. Coil 0 C Voltage: to 4VDC*, coil. 3 to 4VDC*, coil. Nominal C: 400mW, coil. 600mW, coil. Duty Cycle: Continuous. Initial Insulation Resistance: 0,000 megohms, min., at 0 C, 0VDC and % rel. humidity. * Other coil voltages upon request. Coil Data DC Nominal Nominal Resistance Set Reset Coil Voltage in Ohms Voltage Voltage Current VDC ±0% VDC VDC (m) , Designed to meet UL/CS/VDE ratings with relay properly vented. Remove vent nib after soldering and cleaning. UL/CS 70 C: 3 40VC GP 6K 8VDC Resistive 30K / 0VC* Motor 6K 40VC* Motor 6K 48 LR, 8 40VC Motor 30K 300 Pilot Duty 6K 40VC Resistive 30K 8VDC Resistive/GP 30K / 40VC Motor 6K /4 0VC Motor 6K 300 Pilot Duty 6K * Form only VDE 70 C: 3 6@ VC Resistive 0K VC Resistive 30K VC Resistive 30K VC Resistive 00K Coil Data DC Nominal Nominal Resistance Set Reset Coil Voltage in Ohms Voltage Voltage Current VDC ±0% VDC VDC (m) Operate 0 C Must Operate Voltage: See coil data. Operate Time (Excluding ounce): ms, typ., at nom. voltage. Release Time (Excluding ounce): 4 ms, typ., at nom. voltage. Max. Switching Rate: 360 ops. at rated load. Environmental Data Temperature Range: Storage: -40 C to +0 C. Operating: -40 C to +70 C at rated current. Vibration: 30-0 Hz: N/C opens at >3g and changes from reset to set at >g; Shock: N/C opens at >6g and changes from reset to set at >g.; Initial Dielectric Strength etween Open Contacts: >,000VC ( minute). etween Poles (code ): >,0VC ( minute). etween Coil and Contacts: >,000VC ( minute). Creepage/Clearance, Coil to Contact: 0/0mm. Mechanical Data Termination: Printed circuit terminals. Enclosures: RT 3, 4: Flux-tight, top vented, plastic case. Weight: 0.46 oz. (3g) approximately.
7 Ordering Information (Latching Model). asic Series: RT = Miniature, printed circuit board relay.. Enclosure: 3 = pole 6, Pinning mm, flux-tight (Code 3). 4 = pole 8, Pinning mm, flux-tight (Code ). 3. Contact rrangement: = Form C (SPDT) (Requires wiring diagram code 3.) = Form C (DPDT) (Requires wiring diagram code.) 4. Contact Material: 4 = Silver-nickel 90/0.. Coil Voltage: Coil Coil Voltage 0 F0 = VDC 06 F06 = 6VDC F = VDC 4 F4 = 4VDC Typical Part Number RT Stock Items Consult factory for availability. Outline Dimensions Wiring Diagrams (ottom View).6 (.7). (.7) Pole 6 Pole 8 6X.03 X.00 (.80 X.) (9) (4.3) * X.00 X.00 (. X.) * Coil version only 3* * Coil Version Only Code 3 Code 3* Coil Coils Coil Terminals 3 Operate + + Reset + + Contact position not defined at delivery. PC oard Layout (ottom View) Pole 6 Pole 8 mm reaking Capacity Pole Pole.394 (0.0).788 (0.0) 0 0 *.96 (7.).48 * (3.76 * Coil Version Only : 6 Version. : Version. : Contact. : Contacts in series. Code 3 &
8 RT series Sockets and ccessories File E349 File LR438 NR 38 RT786 with RPMU0730 RP7860 RT606 Sockets for RT Series Relays RT7864 0, 300VC 3.mm Pinning RT786, Pole 0, VC Pole x 0, VC mm Pinning RT7866, Pole, 300VC Pole x, 300VC mm Pinning (7.).97 (7.).97 (7.) Relay Ejector.60 (.).77 (4.).874 (.).693 (43) Hold-Down Spring RT (.).77 (4.).874 (.).693 (43) Hold-Down Spring RT (.).77 (4.).874 (.).83 (8) Ejector/Hold-Down Spring RT606 3 Module RP7860 0, VC 3.mm Pinning PC oard Layout (ottom View) RP7860 Pole 0, VC Pole x 0, VC mm Pinning PC oard Layout (ottom View).38 (3.).0 (.08). (3.0). (3.0). (.7).89 (4.8).89 (4.8).34 (9.0) Hold-Down Spring RP604.4 (0.8).66 (6.8).30 (7.6).80 (0.3) Ø.06 DI. (.). (.7).89 (4.8).89 (4.8).34 (9.0) Hold-Down Spring RP604.4 (0.8).0 (.08).30 (7.6).60 (.4) Ø.06 DI. (.) Socket and ccessory Selection Table Stock items are boldfaced. Socket Socket Termination Hold-Down Spring RT7864, DIN Screw Terminal Socket RT606 RT786, DIN Screw Terminal Socket RT606 RT7866 DIN Screw Terminal Socket RT606 RP7860 PC Terminal Socket RY604 RP7860 PC Terminal Socket RY604 RPMT000 Protection Diode Module N RPMU048 RC Network Module 4-48VC RPMU0730 RC Network Module 0-30VC RPML004 LED Module -4VDC 4 RPML04 LED Module -48VC/VDC RPML00 LED Module 0VDC 4 RPML0730 LED Module 0-30VC * Note. Not suitable for bistable relay with two coils.. For a 6 pole relay the following jumpers have to be connected; to, to and 4 to Insertion of the relay. First the ejector (and eventually the module) has to be mounted onto the socket. Then the relay has to be set in the correct position and pressed into the socket until the ejector snaps over the top of the relay. 4. Standard polarity: :+, : Tyco Electronics Corporation - P&, Winston-Salem, NC 70 Technical Support Center: , Specifications and availability subject to change without notice. 3C7800 Printed in U.S.. IH/-00
RT series Miniature Printed Circuit Board Relays, Sockets and Accessories
s 查询 RT40 供应商 捷多邦, 专业 PC 打样工厂,4 小时加急出货 RT series Miniature Printed Circuit oard Relays, Sockets and ccessories pplied Coil Voltage (% of rated nom.) RT series (DC Coil) 6 mp PC oard Miniature Relay Meets
More informationAlphanumeric Index. Circuit Breakers Low-signal PC Board Relays Mid-Range PC Board Relays
Alphanumeric Index Series Type Page 0409 (Hi-Inrush)... A, One-pole Relay... 488 04... 16A, One-pole Relay... 491 0429 (Hi-Inrush)... A, One-pole Relay... 457 0430... -16A, One- or Two-pole Relay... 495
More informationG2RL-1A G2RL-1 G2RL-2A G2RL-2
9 PCB Relay High Capacity, Low Profile Relay Low profile:.7 mm max. in height Cadmium-free contacts ensuring environment-friendly use 0 kv impulse surge withstand Clearance and creepage distance: 0 mm/0
More informationSPST-NO SPDT DPST-NO DPDT
PCB Relay A Power Relay with Various Models High-sensitivity ( mw) and High-capacity ( A) Models available. Low profile:.7 mm max. in height Conforms to VDE (EN0-), UL and CSA.. Meets EN0- requirements
More informationPCB Relay. Ordering Information. SPST-NO Type Breaks 10-A Loads; SPST-NO + SPST-NC Type Breaks 8-A Load
PCB Relay SPST-NO Type Breaks 10-A Loads; SPST-NO + SPST-NC Type Breaks -A Load Compact: 20 x 15 x 10 mm (L x W x H). Low power consumption: 200 mw. Flux protection or plastic-sealed construction available.
More informationPower PCB Relay. To Order: Select the part number and add the desired coil voltage rating (e.g., G6B-1114-US-DC6).
Power PCB Relay Subminiature 20 L x 9.90 W x 9.90 H mm (0.79 L x 0.39 W x 0.39 H in) Low power consumption (200 mw) Sealed construction permits automatic soldering and cleaning of the PC board High-capacity
More informationPCB Relay SPST-NO G6CU-1117P-US G6CU-1114P-US G6CU-1117C-US G6CU-1114C-US SPST-NO + SPST- G6CU-2117P-US G6CU-2114P-US G6CU-2117C-US G6CU-2114C-US
PCB Relay SPST-NO Type Breaks 10-A Loads; SPST-NO + SPST-NC Type Breaks 8-A Load Compact: 20 15 10 mm (L W H). Low power consumption: 200 mw. Flux protection or fully sealed construction available. Unique
More information3.5 mm contact pin pitch 1 Pole 12 A PCB direct or via socket
41 Low profile PCB relays 8-12 - 16 41 1 & 2 Pole - Low profile (15.7 mm height) 41.31-1 Pole 12 (3.5 mm pin pitch) 41.52-2 Pole 8 (5 mm pin pitch) 41.61-1 Pole 16 (5 mm pin pitch) PCB mount - direct or
More informationSPST-NO SPDT DPST-NO DPDT
PCB Relay Next-generation PCB Relay Available in 2 Models Low profile:. mm max. in height Contains no lead inside and features cadmium-free contacts ensuring environment-friendly use. Conforms to VDE0
More informationPCB Relay. --- G2R-1-SN --- G2R-2-SN LED indicator with test
PCB Relay A Power Relay for a Variety of Purposes with Various Models Conforms to VDE0 (VDE approval: C0 insulation grade), UL08, CSA., SEV, SEMKO. Meets VDE0700 requirements for household products according
More information888-1AC-F-C 888-1AC-F-V 888-1AC-F-S (SPNO) 888-2AC-F-C 888-2AC-F-V 888-2AC-F-S (DPNO) 888N-2AC-F-C 888N-2AC-F-V 888N-2AC-F-S (DPNO)
Type List Standard Type eatures High rating miniature PCB Relay. AC & DC coil are both available. UL/CUL and VDE approved. 7A 277VAC SPDT. Low profile.7mm and high insulation system Class. High CTI material
More informationG6C. Miniature High Capacity Relays with SPST-NO 10A and SPST-NO + SPST-NC 8A. Model Number Legend. Application Examples.
Miniature High Capacity Relays with SPST-NO 0A and SPST-NO + SPST-NC A SPST-NO 0A and SPST-NO + SPST-NC A for power switching and output that satisfy the needs for space-saving. Small High-capacity Relays
More informationSong Chuan / Relay Catalog 507
07 eatures High rating miniature PCB Relay. AC & DC coil are both available. UL/CUL and VDE approved. 7A 277VAC SPDT. 2A 277VAC DPDT. Low profile.7 and high insulation system class High CTI material &
More informationDPDT MJN2CF-IN* MJN2C-IN 3PDT MJN3CF-IN* MJN3C-IN Latching Plug-in DPDT MJN2CK
General Purpose Relay MJN Relay with Plug-in Termination, available in SPDT, DPDT or 3PDT models Rugged power driver offers superior 3/16 through-air and 3/8 over-surface spacing Interlocked frame and
More informationKRPA, KRP, KA, KR series
Catalog 1084 Issued -0 KRPA, KRP, KA, KR series to 10 Amp General Purpose Relay File E944, E, E818 (KR Hermetic) File LR14 KRPA KRP KA Users should thoroughly review the technical data before selecting
More informationG5NB. A Miniature Relay with 1-pole 3A/5A Switching Capability and 10 kv Impulse Withstand Voltage. Application Examples. Model Number Legend
PC Power Relay A Miniature Relay with -pole A/5A Switching Capability and 0 kv Impulse Withstand Voltage Highly efficient magnetic circuit for high sensitivity (200 mw). Small, yet provides 0-kV impulse
More information2 or 4 pole changeover contact Plug-in/Faston 187
56 Miniature power relays 56 Plug-in - Power relay, & 4 pole Flange mount option - (Faston 87, 4.8 x 0.5 mm termination) C coils & DC coils Lockable test button and mechanical flag indicator Cadmium Free
More informationFeatures. UL Insulation. Sealed type washable 1A (SPNO) H H-1A-C 845H-1A-V 845H-1A-S. system approval Flux tight Sealed type
84 Features Low cost and low profile miniature PCB Relays. UL/CUL, TUV approved. High rating 12A SPDT, DPDT. mm & mm pinning are both available. Optional for class F. Standard coil 0mW and high sensitivity
More informationDPDT MJN2CF-IN* MJN2C-IN 3PDT MJN3CF-IN* MJN3C-IN Latching Plug-in DPDT MJN2CK
General Purpose Relay MJN Relay with Plug-in Termination, available in SPDT, DPDT or 3PDT models Rugged power driver offers superior 3/16 through-air and 3/8 over-surface spacing Interlocked frame and
More informationClassification Contact form Enclosure rating Terminal shapes Model Minimum packing unit Standard. SPST-NO (1a) Fully sealed PCB terminal
SPST Slim Power Relay for A switching Slim -mm width and miniature size. (20.08 12. mm) High switching capability A (20 VAC and VDC), and high contact reliability by crossbar-twin contact. Low power consumption
More information62.22 Copper side view
62 Power relays 16 62 Printed circuit mount 16 Power relay 2 & 3 Pole changeover contacts or NO ( 3 mm contact gap) C coils & DC coils Reinforced insulation between coil and contacts according to EN 60335-1,
More information507-1A H - - C. Features. Type List. Ordering Information
Type List Standard type Teral style Contact form High rating iature PCB Relay. AC & DC coil are both available. UL/CUL and VDE approved. 7A 77VAC SPDT. Low profile mm and high insulation system class.
More information3.5 mm contact pin pitch 1 Pole 12 A PCB direct or via socket
8-12 - 16 A Features 41.31 41.52 41.61 1 & 2 Pole - Low profile (15.7 mm height) 41.31-1 Pole 12 A (3.5 mm pin pitch) 41.52-2 Pole 8 A (5 mm pin pitch) 41.61-1 Pole 16 A (5 mm pin pitch) PCB mount - direct
More informationG5LE. Ordering Information. PCB Relay. A Cubic, Single-pole 10-A Power Relay J MODEL NUMBER LEGEND G5LE PCB Relay G5LE
PCB Relay GLE A Cubic, Single-pole 0-A Power Relay D Subminiature sugar cube relay. D Contact ratings of 0 A. D Withstands impulses of up to 4,00 V. D Two types of seal available: flux protection and plastic-sealed.
More information67TD Series - Miniature Time Delay Relays DPDT, 4PDT, 5 Amp
TD Series - Miniature Time Delay Relays DPDT, PDT, mp E When small size is a requirement series relays fit where others won t. The miniature ice cube timers are capable of handling up to amps. Typical
More informationPCB relay for DC voltage, polarized, monostable or bistable
V23042 PCB relay for DC voltage, polarized, monostable or bistable Features Universally applicable in the most varied circuit functions in the field of telecommunications and small signal technology Versatile
More informationOrdering Information. PCB Relay G6RL. Model Number Legend: Low-profile power relay with maximum switching of 10 A
PCB Relay G6RL Low-profile power relay with maximum switching of 10 A Low profile: 12.3 mm in height Max. switching capacity: 2,500 VA (NO) IEC 60947-5-1, AC-15, DC13 Clearance and creepage distance: 10
More informationFeatures. Designation (provided with) style. Contact. Insulation. system. gap. 110A-1AH-F-C 110BA-1AH-F-C 110A-1AH1-F-C 110BA-1AH1-F-C High power type
0 eatures High duty sugar cube relay with 6A 77VAC, A 77VAC. Contact gap can be greater than.mm,.mm. Conforms to European photovoltaic standard IEC 609-. Coil holding can be reduced to 6%, %V of the nominal
More information3.5 mm contact pin pitch 1 Pole 12 A PCB direct or via socket
41 Series - Low profile PCB relays 8-12 - 16 A Features 41.31 41.52 41.61 1 & 2 Pole - Low profile (15.7 mm height) 41.31-1 Pole 12 A (3.5 mm pin pitch) 41.52-2 Pole 8 A (5 mm pin pitch) 41.61-1 Pole 16
More information40 Series - Miniature P.C.B. Relays A
..4..4..4 40 Series - Miniature P.C.B. Relays 8-0 - 6 A - P.C.B. or plug-in mount - AC, DC, sensitive DC or single bistable coil versions available - 8 mm, 6 kv (./0 µs) between coil and contacts - Ambient
More information38 SERIES. Relay interface modules A. EMR Electromechanical Relays. Common features. SSR Solid State Relays. 6.
38 Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit 6.2 mm wide EMR - DC, AC or AC/DC
More information62 Series - Power relays 16 A. Features SERIES / / Printed circuit mount 16 A Power relay
62 Series - Power relays 16 62 SERIES Features 62.22 / 62.23 62.22-0300 / 62.23-0300 Printed circuit mount 16 Power relay 2 & 3 Pole changeover contacts or NO ( 3 mm contact gap) C coils & DC coils Reinforced
More informationA rated contacts PCB mount - bifurcated terminals. Copper side view
66 Power relays 30 66 2 Pole Changeover (DPDT) 30 Power relay 66.22 PCB connections & mount 66.82 Faston 250 connections - Flange mount Reinforced insulation between coil and contacts according to EN 60335-1;
More informationRatchet Relay. Ordering Information. Unique Ratchet Mechanism Assures Positive Alternate Transfer/Switching Operation. G4Q-jjjj
Ratchet Relay Unique Ratchet Mechanism Assures Positive Alternate Transfer/Switching Operation Each contact in the double-pole contact mechanism performs alternate make-brake operation at each pulse input
More informationRelè di potenza 30 A SЕRIES. Power. generators. Industrial washing machines. Burners, boilers and furnaces. Industrial furnaces and ovens
66 SЕRIES Relè di potenza 30 Power generators Industrial washing machines Burners, boilers and furnaces Industrial furnaces and ovens ir conditioners Hoists and cranes Back-up generators Industrial motors
More informationMINIATURE POWER RELAY IN DS RELAY SERIES FEATURES resistance ORDERING INFORMATION. Ex. DSP 1 L DC12V R
MINIATURE POWER RELAY IN DS RELAY SERIES DSP- RELAYS DSPa DSP SPECIFICATIONS.. DSPa Coil (polarized) (at C F) Minimum mw power coil latching mw mw power coil latching mw.... Contact Arrangement a ab a
More informationSuitable for lighting and motor load, 1 Form A 50A latching relays
Suitable for lighting and motor load, 50A latching relays DJ-H RELAYS (ADJH) 9.0 5 1 0.2 9.0 5 New 1 FEATURES 1. High inrush capability Tungsten load (TV-20 class) Electronic ballast load (NEMA10) Capacitive
More information48 SERIES. Relay interface modules 8 A CO forcibly guided contacts relay interface modules,15.8 mm wide Type 48.12
48 Relay interface modules 8 A 48 2 CO forcibly guided contacts relay interface modules,15.8 mm wide Type 48.12 2 CO 8 A s Relay with forcibly guided contacts according to EN 50205 Type 35 mm rail (EN
More informationClassification Enclosure rating Contact form Model Standard Flux protection SPST-NO G6RL-1A
PCB Relay Low-profile power relay with maximum switching of 8 A Low profile: 12.3 mm in height Max. switching capacity: 2,500 VA (NO) Dielectric strength: 5 kv Clearance and creepage distance: 10 mm. RoHS
More informationClassification Terminal Shape Contact form Enclosure rating Model Rated coil voltage
ow-profile Relay with Various Models ow profile:.7 mm in height. Creepage distance 8mm between coil and contacts 0 kv Impulse withstand voltage Models with AC coil available. High-Inrush model available
More informationCOMPACT PC BOARD POWER RELAY FEATURES. Characteristics. Initial breakdown voltage* 1. Vibration resistance
VDE PACT PC BOARD POWER RELAY JW RELAYS..... FEATURES Miniature package with universal terminal footprint High dielectric withstanding for transient protection:, V surge in µs between coil and contact
More informationCompact size 2 Form A and 2 Form A 1 Form B 35A power relays for energy management and industrial equipment. Conditions. Mirror contact mechanisms
Compact size and 3A power relays for energy management and industrial equipment HE-S RELAYS New TYPICAL APPLICATIONS Photovoltaic power generation systems (Solar inverter) Uninterruptible Power Supplies
More information1a/1c/2a/2c/5A/10A power relays for power supply
Automation Controls Catalog VDE a/c/2a/2c/a/a power relays for power supply JW RELAYS RoHS compliant Protective construction: Flux-resistant /Sealed ORDERING INFORMATION Contact arrangement : Form C a:
More information1a/1c/2a/2c/5A/10A power relays for power supply
a/c/2a/2c/a/a power relays for power supply JW RELAYS RoHS compliant Protective construction: Flux-resistant type/ ORDERING INFORMATION JW Contact arrangement : Form C a: Form A 2: 2 Form C 2a: 2 Form
More informationVE 12 H M S E K HV VD (a) ( * ) (b) (c) (d) (e) (f) (g) (h) (i)
POWER RELAY 1 POLE 5 A (MEDIUM LOAD CONTROL) VE SERIES Lead Free FEATURES UL, CSA, VDE recognized 1 form A (SPST-NO) or 1 form C (SPDT) contact Low cost, miniature relay with big performance in small package
More information60 Series - General purpose relays 6-10 A. Features Plug-in mount 10 A General purpose relay
Series - General purpose relays - 0 A Features Plug-in mount 0 A General purpose relay.. & pole changeover contacts Cadmium Free contacts (preferred version) AC coils & DC coils UL Listed (certain relay/socket
More informationTable of Contents. CII Mid-Range Relays
Table of Contents TD2 Series Time Delay Relays, per MIL-PRF-83726/28, /29, /30, & /31..........5-2 5-5 Double-pole, Electrically Held, 5 mps and Less FC-205 Series.................................................5-6
More informationG8P. PCB Power Relay. Model Number Legend. Application Examples. Ordering Information
CB ower Relay Up to 30 A switching capacity in compact package. 2.0 mm cantact gap type available (-1A4-B) Available with quick-connect contact terminals for easy load connecting with either QC or CB coil
More informationClassification Contact form Contact type Contact material Enclosure Rating Model Standard DPDT Bifurcated crossbar Ag (Au alloy) Fully sealed G5V-2
Miniature Relay for Signal Circuits ROHS compliant. Wide switching power of 10 µa to 2 A. High dielectric strength coil-contacts:1,000 VAC; open contacts: 750 VAC. Conforms to FCC Part 68 requirements.
More informationMT4 Relay. 4 pole telecom/signal relay Through Hole Type (THT) Non-polarized. non-latching 1 coil. Features. Typical applications
4 pole telecom/signal relay Through Hole Type (THT) Non-polarized. non-latching 1 coil Features Telecom/signal relay (dry circuit, test access, ringing) 20 x 14.8 mm, 0.795 x 0.582 inch Switching current
More information2 POLES 5 A LOW PROFILE TYPE
POWER RELAY POLES A LOW PROFILE TYPE FTR-F1 SERIES FEATURES Low profile power relay (height 1. mm) employing unique construction DPST/DPDT A, TV-3 rating available Higher isolation by employing reinforced
More informationAXICOM Telecom-, Signal and RF Relays. D2n V23105 Relay Nov. 07 Rev A ECOC: JM10
108-98007 Nov. 07 Rev A ECOC: JM10 Disclaimer While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this datasheet, Tyco Electronics does not guarantee that
More information38 Series - Relay interface modules A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical Relays
More informationClassification Enclosure rating Contact form Contact material
PCB Relay Low-profile power relay with maximum switching of 10 A Low profile: 12.3 mm in height Max. switching capacity: 2,500 VA (NO) Dielectric strength: 5 kv Clearance and creepage distance: 10 mm.
More informationFeatures. Insulation system F 835-1A-F-C 835-1A-F-S L-1A-C 835L-1A-S F 835L-1A-F-C 835L-1A-F-S NL-1A-C 835NL-1A-S
Type List Terminal style PCB terminal L PCB terminal NL PCB terminal Contact form 1A (SPNO) 1A (SPNO) 1A (SPNO) Insulation system Features Miniature 12A 12VAC, A 20VAC/30VDC PCB Relay. UL/CUL, CSA, TUV,
More informationPCB Relay. Contact form Terminal Single-side stable Single-winding latching Double-winding latching
PCB Relay Subminiature, Sensitive SPDT Signal Switching Relay High sensitivity: 98-mW pickup coil power. Impulse withstand voltage meets FCC Part 68 requirements. Fully sealed construction. Unique moving
More information38 Series - Relay interface modules A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit 6.2 mm wide EMR - DC, AC or AC/DC
More informationCV : 16 A, pinning 5 mm,: switching at 105 C 6. Market Code None : General purpose HA : Home Appliance according to IEC/EN
ow Profile Power Relay with.7 mm height, ideal for incorporation in miniature equipments A wide variety of single pole, double pole, high-capacity (6 A) type and high-sensitivity type (2 mw) Relays are
More informationSECTION 1 SOCKET COMPATIBLE AND FLANGE MOUNTED RELAYS 1 TO 30 AMPERES
Your Contact for Industrial Relays SECTION 1 SOCKET COMPATIBLE AND FLANGE MOUNTED RELAYS 1 TO 30 AMPERES SOCKET COMPATIBLE & FLANGE MOUNT RELAYS RELAY SERIES CERTIFIED CLASS 1 DIVISION 2 FOR HAZARDOUS
More informationType Sealing Poles Contacts Rated voltage Model Standard Flux-tight 4 poles 3PST-NO, SPST-NC 24 VDC G7SA-3A1B. Type LED indicator Poles Rated voltage
Safety Relay Slim Safety Relays Conforming to EN Standards The forcibly guided contact in the assures safe operation (EN50205 Class A, approved by VDE.) Ideal for use in safety circuits in press machinery,
More informationHF3 Relay (Preliminary)
Relay (Preliminary) 1 pole high frequency relay, polarized Through Hole Type (THT) or Surface Mount Technology (SMT) Relay types: non latching latching 1 coil latching 2 coils Features - Frequency range
More informationJS SERIES 1 POLE 8 A (MEDIUM LOAD CONTROL) POWER RELAY. Lead Free / RoHS compliant* FEATURES ORDERING INFORMATION
POWER RELAY 1 POLE 8 A (MEDIUM LOAD CONTROL) JS SERIES FEATURES Lead Free / RoHS compliant* UL, CSA, VDE, SEV, SEMKO, FIMKO, ÖVE, BSI recognized UL class B (10 C) insulation 1 form A (SPST-NO) or 1 form
More informationRelay interface modules A
4C SЕRIES Relay interface modules 8-10 - 16 A Escalators Road / tunnel lighting Hoists and cranes Carousel warehouses Control panels Panels for electrical distribution FINDER reserves the right to alter
More informationRelays & Sockets RU Series Universal Relays. With Latching or Momentary Lever. Standard (without lever) Key features:
RU Series Universal Relays Key features: Full featured universal miniature relays Designed with environment taken into consideration Two terminal styles: plug-in and PCB mount Non-polarized LED indicator
More informationDistributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. POWER RELAY 1 POLE 3,, 1 A FBR16 SERIES FEATURES Compact with high power (3
More informationEnclosure rating. LED indicator with test button G2R-1-SNI G2R-2-SNI Unsealed Diode. LED indicator and diode with test button G2R-1-SNDI G2R-2-SNDI
General-purpose Relay CSM_GR-_-S_DS_E Slim and Space-saving Power Plug-in Relay Lockable test button models now available. Built-in mechanical operation indicator. Provided with nameplate. AC type is equipped
More informationA rated contacts Flange mount/faston 250 (6.3 x 0.8 mm) connection
65 Power relays 20-30 65 20 Power relays 1 NO + 1 NC (SPST-NO + SPST-NC) 65.31 Flange mount Faston 250 connections 65.61 PCB mount C coils & DC coils Cadmium Free option available 65.31 65.61 20 rated
More informationG5Q. Ordering Information. Specifications. PCB Relay. Compact, High Isolation Relay J COIL RATINGS. 638 PCB Relay G5Q
PCB Relay G5Q Compact, High Isolation Relay D Compact single pole relay with high isolation between coil and contacts. D Up to 10 A switching on the NO contacts. D Ensures a withstand impulse voltage of
More informationTable of Contents. Kilovac Time Delay Relays
Table of Contents 1600/1700 Series, Delay on Operate, Fixed & Adjustable......................8-2, 8-3 2400 Series, Subminiature, Delay on Operate, Fixed.............................8-4 5600/5700 Series,
More information10 A MINIATURE POWER RELAY mm inch. 2 Form A, 1 Form A 1 Form A. Initial breakdown voltage* 2. Vibration resistance.
VDE A MINIATURE POWER RELAY RELAYS a..9.9 SPECIFICATIONS power FEATURES.9 ab.9 Contact, Arrangement Form A Form A Form B Initial contact resistance, ma. (By drop V DC A) mω Contact material Gold flash
More informationVSB SERIES 1 POLE 16 A (HEAVY POWER CONTROL) POWER RELAY FEATURES ORDERING INFORMATION SAFETY STANDARD AND FILE NUMBERS
POWER RELAY 1 POLE 16 A (HEAVY POWER CONTROL) VSB SERIES FEATURES All or nothing relay UL, CSA, VDE, SEV, FIMKO, SEMKO, IMQ, ÖVE, BSI recognized Working class: C Type of service: continuous duty Heavy
More informationFlag indicator. Units. V Resistive Resistive Resistive HP HP Pilot Duty ma ~ ~ ~ ~ V V VA W. (Resistive) ms Vrms Vrms Vrms. C C g-n g-n. grams 1.
SETION Power Relays/SPDT, mp Rating (D & ) UL US UL Listed When Used With Magnecraft Sockets. Push-To-Test utton Removable Lock-Down Door Flag indicator LED Status Lamp UL Recognized File No. E Finger
More information48 Series - Relay interface modules A. Features
Series - Relay interface modules 8-0 - 6 A Features & Pole relay interface modules, 5.8 mm wide. Ideal interface for PLC and electronic systems.3 - Pole 0 A.5 - Pole 8 A.6 - Pole 6 A coils or sensitive
More informationRU Series Universal Relays
Full featured universal miniature relays Designed with environment taken into consideration Two terminal styles: plug-in and PCB mount Non-polarized LED indicator available on plug-in relays No internal
More informationCOMPACT PC BOARD POWER RELAY
VDE PACT PC BOARD POWER RELAY JW RELAYS.... Compliance with RoHS Directive FEATURES Miniature package with universal terminal footprint High dielectric withstanding for transient protection:, V surge in
More informationMiniature Power Relay MSR
V23061 PCB relay for DC voltage, neutral, monostable Features Used as a switching element for electrical separation between low-power control circuits and power load circuits With 8 mm clearance and creepage
More informationFBR46 SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY FEATURES ORDERING INFORMATION
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FBR46 SERIES FEATURES Miniature size About 50% smaller in volume compared with the FBR240 series used mainly in communication equipment. High surge
More informationJS SERIES 1 POLE 8 A (MEDIUM LOAD CONTROL) POWER RELAY. Lead Free FEATURES ORDERING INFORMATION
POWER RELAY 1 POLE 8 A (MEDIUM LOAD CONTROL) Lead Free FEATURES UL, CSA, VDE, SEV, SEMKO, FIMKO, ÖVE, BSI recognized UL class B (130 C) insulation 1 form A (SPST-NO) or 1 form C (SPDT) contact Low profile
More informationRJ Series Slim Power Relays
RJ Series RJ Series Slim Relays Circuit Breakers Terminal Blocks Timers Display Lights Switches & Pilot Lights Compact and rugged power relays. Large switching capacity. Compact housing only.7-mm wide.
More information2 POLE 5A/TV-3 RATED COMPACT TYPE
POWER RELY POLE /TV-3 RTED COMPCT TYPE FTR-F Series RoHS compliant FETURES Small high density type relay mm save % compared to VB UL/CS/VDE/SEMKO/CQC approved Insulation distance: minimum mm between coil
More information62 Series - Power relays 16 A. Features / /
6 Series - Power relays 6 A Features 6. / 6.3 6.-0300 / 6.3-0300 Printed circuit mount 6 A Power relay & 3 Pole changeover contacts or NO ( 3 mm contact gap) AC coils & DC coils Reinforced insulation between
More information8 A MINIATURE POWER RELAY IN DS RELAY SERIES
DSP A MINIATURE POWER RELAY IN DS RELAY SERIES DSP RELAYS DSPa.. DSPa.. DSP.. RoHS Directive compatibility information http://www.nais-e.com/ FEATURES Power types added to DS relay series High switching
More information30 AMP POWER RELAY WITH SPACE SAVING DESIGN
VDE 3 AMP POWER RELAY WITH SPACE SAVING DESIGN JH-RELAYS 2..2 3.. FEATURES Many safety-oriented characteristics incorporated Contact gap: more than 3 mm. inch for Form A and 2 Form A Breakdown voltage
More informationSubminiature Automotive Relays Type CV20 Monostable
Subminiature Automotive Relays Type CV20 Subminiature relay Switching capacity 20 A DC coils 6 to 24 VDC 1 change over contact/1 double make contact High resistance to vibration and shock Low power consumption
More informationRF Signal Relays AXICOM. HF3 S Relay
n Y-Design n range DC to n Impedance 5 n Small dimensions (15x7.6x1.6mm) n 1 form C contact (1 changeover contact) n Immersion cleanable n Low power consumption ( 14mW) Typical applications Cable modems
More informationMAGNETIC-LATCHING ESTABLISHED RELIABILITY TO-5 RELAYS DPDT RELAY TYPE. DPDT relay with internal diode for coil transient suppression
ESTABLISHED RELIABILITY SERIES DESIGNATION MAGNETIC-LATCHING ESTABLISHED RELIABILITY TO-5 RELAYS DPDT 420/422 DPDT basic relay 420D/422D 420DD/422DD RELAY TYPE DPDT relay with internal diode for coil transient
More information8 A MINIATURE POWER RELAY IN DS RELAY SERIES FEATURES
A MINIATURE POWER RELAY IN DS RELAY SERIES DSP RELAYS FEATURES DSPa.. DSPa DSP.... Power types added to DS relay series High switching capacity: a: A V AC / ab, a: A V AC High sensitivity: mw pick-up power
More informationMagnecraft Printed Circuit Board & Reed Relays. Catalog
Magnecraft Printed Circuit Board & Reed Relays Catalog 2010 Contents Series Overview....................................................3 117SIP Relays.....................................................4
More information58 SERIES. Relay interface modules 7-10 A 58.P3 58.P4
58 58 3 & 4 CO relay interface modules, 31 mm wide with Push-in terminals Ideal interface for PLC and electronic systems 58.P3 58.P4 Type 58.P3 3 CO 10 A Push-in terminals Type 58.P4 4 CO 7 A Push-in terminals
More informationHybrid & Electric Mobility Solutions Electric Vehicle Contactors
EVC Contactor continuous carry Hermetically Sealed Form X 2 4 Performance Data Parameter Units Values Contact rrangement, power contacts Rated Operating Voltage Continuous (Carry) Current, Typical Limiting
More information30 A rated contacts Flange mount Faston 250 connections. 30 A rated contacts PCB mount - bifurcated terminals. Copper side view
66 Series - Power relays 30 A Features 66.22 66.82 2 Pole Changeover (DPDT) 30 A Power relay 66.22 PCB connections & mount 66.82 Faston 250 connections - Flange mount Reinforced insulation between coil
More informationRelays & Sockets. RF2V 2-Pole Force Guided Relays/SJ Series Relay Sockets. UL/Recogntion File No. E55996 TÜV SÜD. EU Low Voltage Directive
RFV RFV -Pole Force Guided Relays/SJ Series Relay Sockets Key features: -pole force guided relay to reduce cost and installation space. Force guided contact mechanism (EN00 Type A TÜV approved). Reinforced
More information2 Pole CO, 8 A Plug-in 2 CO (DPDT) 1 CO (SPDT) 8/15 16/25* 250/ /400 2,000 4, /0.5/ /0.5/ (5/5) 300 (10/5)
46 Series - Relays for railway applications 8-16 A 46 SERIES Features Plug-in power relays: 8 A, 2 pole 16 A, 1 pole Complies with EN 45545-2:2013 (protection against fire of materials), EN 61373 (resistance
More informationCOMPACT PC BOARD POWER RELAY
VDE PACT PC BOARD POWER RELAY JW RELAYS..... RoHS Directive compatibility information http://www.nais-e.com/ FEATURES Miniature package with universal terminal footprint High dielectric withstanding for
More informationOrdering Information. Latching Relay MMK. Available Models. Models Conforming to Auxiliary Power Relay Specifications
Latching Relay MMK CSM_MMK_DS_E_1_1 Mechanically Latching Relays Based on the MM Power Relay Low power consumption due to mechanical latch for economic operation. Relays with mixed coil specifications
More informationTwo-way Action Test Button (Models with Lockable Test Button) For Momentary Operation
General Purpose Relays MKS Exceptionally Reliable General Purpose Relay now available with Lockable Test Button IEC Rating of A 0 V AC 0/0 Hz, General use 100,000 cycles. Mechanical indicator standard
More informationCENTIGRID ESTABLISHED RELIABILITY RELAYS
SERIES DESIGNATION CENTIGRID ESTABLISHED RELIABILITY RELAYS SENSITIVE DPDT 134 DPDT basic relay 134D 134DD RELAY TYPE DPDT relay with internal diode for coil transient suppression DPDT relay with internal
More informationIM Relay Sept 06 Rev. F ECOC: JM10
108-98001 Sept 06 Rev. F ECOC: JM10 Index UL 508 File No. E 111441 UL 60950 IEC/EN60950 IEC Ref. Cert. No. 3270 Dimensions 4 Operating Range 5 Data and Ordering Information 6 Contact Data 10 Insulation
More informationType Sealing Poles Contacts Rated voltage Model 5PST-NO, SPST-NC 24 VDC *1
Slim Relays with Forcibly Guided Contacts Conforming to EN Standards EN50205 Class A, approved by VDE. Ideal for use in safety circuits in production machinery. Four-pole and six-pole Relays are available.
More informationModel Number Structure
General-purpose Relay G2RS-(S) Slim and Space-saving Power Plug-in Relay Lockable test button models now available. Built-in mechanical operation indicator. Provided with nameplate. AC type is equipped
More information