2 or 4 pole changeover contact Plug-in/Faston 187

Size: px
Start display at page:

Download "2 or 4 pole changeover contact Plug-in/Faston 187"

Transcription

1 56 Miniature power relays 56 Plug-in - Power relay, & 4 pole Flange mount option - (Faston 87, 4.8 x 0.5 mm termination) C coils & DC coils Lockable test button and mechanical flag indicator Cadmium Free contacts (standard version) Contact material options 96 series sockets Coil EMC suppression ccessories European Patent 56.3/ or 4 pole changeover contact Plug-in/Faston 87 pole normally open contact (.5 mm gap) Plug-in/Faston * For 4 CO (4PDT) only. For UL ratings see: General technical information page V Contact specification Contact configuration CO (DPDT) 4 CO (4PDT) NO (DPST-NO) -.5 mm gap Rated current/maximum peak current /0 /0 Rated voltage/ Maximum switching voltage V C 50/400 50/400 Rated load C V Rated load C5 (30 V C) V Single phase motor rating (30 V C) kw Breaking capacity DC: 30/0/0 V /0.5/0.5 //0.5 Minimum switching load mw (V/m) 500 (0/5) 500 (0/5) Standard contact material gni gni Coil specification Nominal voltage (U N ) V C (50/60 Hz) * V DC Rated power C/DC V (50 Hz)/W.5/ /.3.5/ Operating range C (0.8.)U N (0.85.)U N DC (0.8.)U N (0.85.)U N Holding voltage C/DC 0.8 U N / 0.6 U N 0.85 U N / Must drop-out voltage C/DC 0. U N / 0. U N 0. U N / Mechanical life C/DC cycles / / Electrical life at rated load C cycles Operate/release time ms 8/3 0/4 8/4 Insulation between coil and contacts (./50 μs) kv Dielectric strength between open contacts V C mbient temperature range C Environmental protection RT I RT I pprovals (according to type)

2 56 56 Miniature power relays Printed circuit mount Power relay & 4 pole C coils & DC coils Cadmium Free contacts (standard version) Contact material option RT III (wash tight) option available 56.4/ or 4 pole changeover contact PCB mount pole normally open contact (.5 mm gap) PCB mount * For 4 CO (4PDT) only. For UL ratings see: General technical information page V 56.4 Copper side view Copper side view Copper side view Contact specification Contact configuration CO (DPDT) 4 CO (4PDT) NO (DPST-NO) -.5 mm gap Rated current/maximum peak current /0 /0 Rated voltage/ Maximum switching voltage V C 50/400 50/400 Rated load C V Rated load C5 (30 V C) V Single phase motor rating (30 V C) kw Breaking capacity DC: 30/0/0 V /0.5/0.5 //0.5 Minimum switching load mw (V/m) 500 (0/5) 500 (0/5) Standard contact material gni gni Coil specification Nominal voltage (U N ) V C (50/60 Hz) * V DC Rated power C/DC V (50 Hz)/W.5/ /.3.5/ Operating range C (0.8.)U N (0.85.)U N DC (0.8.)U N (0.85.)U N Holding voltage C/DC 0.8 U N / 0.6 U N 0.85 U N / Must drop-out voltage C/DC 0. U N / 0. U N 0. U N / Mechanical life C/DC cycles / / Electrical life at rated load C cycles Operate/release time ms 8/3 0/4 8/4 Insulation between coil and contacts (./50 μs) kv Dielectric strength between open contacts V C mbient temperature range C Environmental protection RT I RT I pprovals (according to type)

3 56 Miniature power relays 56 Ordering information Example: 56 series plug-in relay, CO (DPDT), V DC coil, lockable test button and mechanical indicator. B C D Series Type 3 = Plug-in 4 = PCB No. of poles = pole, 4 = 4 pole, Coil version 8 = C (50/60 Hz) 9 = DC Coil voltage See coil specifications : Contact material 0 = Standard gni = gcdo 4 = gsno B: Contact circuit 0 = CO (npdt) 3 = NO (npst),.5 mm contact gap Selecting features and options: only combinations in the same row are possible. Preferred selections for best availability are shown in bold. Type Coil version B C D C C / 56.3 C DC DC / C C / DC DC / 56.4 DC C C - DC D: Special versions 0 = Standard = Wash tight (RT III) for 56.4 and only 6 = Rear flange mount (4 pole only) 8 = Rear 35 mm rail mount (4 pole only) For other mounting options see page 6 C: Options 0 = None = Mechanical indicator 3* = LED (C) 4 = Lockable test button+mechanical indicator 5* = Lockable test button + LED (C) 54* = Lockable test button + LED (C) + mechanical indicator 6* = Double LED (DC non-polarized) 7* = Lockable test button + double LED (DC non-polarized) 74* = Lockable test button + double LED (DC non-polarized) + mechanical indicator 8* = LED + diode (DC, polarity positive to pin 7) for 56.3 only 9* = Lockable test button + LED + diode (DC, polarity positive to pin 7) for 56.3 only 94* = Lockable test button + LED + diode (DC, polarity positive to pin 7) + mechanical indicator for 56.3 only * Options not available for 0 V DC and 400 V C versions. Descriptions: options and special versions Special versions for Rail pplications on request C: Option 3, 5, 54 LED (C) C: Option 6, 7, 74 Double LED (DC non-polarized) C: Option 8, 9, 94 LED + diode (DC, polarity positive to pin 7) - (56.3 only) E U R O P E N P T E N T E U R O P E N 3 Lockable test button and mechanical flag indicator (0040, 0050, 0054, 0070, 0074, 0090, 0094) The dual-purpose Finder test button can be used in two ways: Case ) The plastic pip (located directly above the test button) remains intact. In this case, when the test button is pushed, the contacts operate. When the test button is released the contacts return to their former state. Case ) The plastic pip is broken-off (using an appropriate cutting tool). In this case, (in addition to the above function), when the test button is pushed and rotated, the contacts are latched in the operating state, and remain so until the test button is rotated back to its former position. In both cases ensure that the test button actuation is swift and decisive. 3

4 56 56 Miniature power relays * Only in applications where over voltage category II is permitted. In applications of over voltage category III: Micro-disconnection. Insulation according to EN 680- CO - 4 CO NO Nominal voltage of supply system V C 30/400 30/400 Rated insulation voltage V C Pollution degree 3 3 Insulation between coil and contact set Type of Insulation Basic Basic Overvoltage category III III Rated impulse voltage kv (./50 μs) 4 4 Dielectric strength V C Insulation between adjacent contacts Type of insulation Basic Basic Overvoltage category III III Rated impulse voltage kv (./50 μs) 4 4 Dielectric strength V C Insulation between open contacts Type of disconnection Micro-disconnection Full-disconnection* Overvoltage category II Rated impulse voltage kv (./50 μs).5 Dielectric strength V C/kV (./50 μs) 000/.5 000/3 Conducted disturbance immunity Burst (5 50)ns, 5 khz, on - EN level 4 (4 kv) Surge (./50 μs) on - (differential mode) EN level 4 (4 kv) Other data Bounce time: NO/NC ms /4 (changeover) 3/ (normally open) Vibration resistance (5 55)Hz: NO/NC g 7/4 Shock resistance g 0/4 Power lost to the environment without contact current W (56.3, 56.4).3 (56.34, 56.44) with rated current W 3.8 (56.3, 56.4) 6.9 (56.34, 56.44) Recommended distance between relays mounted on PCB mm 5 Contact specification F 56 - Electrical life (C) v contact current - 4 pole relays Resistive load - cosφ = Inductive load - cosφ = 0.4 Cycles H 56 - Maximum DC breaking capacity Changeover version H 56 - Maximum DC breaking capacity Normally open version DC breaking current () contacts in series DC breaking current () contacts in series 4 DC voltage (V) DC voltage (V) When switching a resistive load (DC) having voltage and current values under the curve, an electrical life of can be expected. In the case of DC3 loads, the connection of a diode in parallel with the load will permit a similar electrical life as for a DC load. Note: the release time of the load will be increased.

5 56 Miniature power relays 56 Coil specifications DC coil data, pole relay Nominal voltage Coil code Operating range Resistance Rated coil consumption U N U min U max R I at U N V V V Ω m DC coil data, 4 pole relay Nominal voltage Coil code Operating range Resistance Rated coil consumption U N U min U max R I at U N V V V Ω m R 56 - DC coil operating range v ambient temperature pole relay C coil data, pole relay Nominal voltage Coil code Operating range Resistance Rated coil consumption U N U min * U max R I at U N (50 Hz) V V V Ω m * U min = 0.85 U N for normally open version. C coil data, 4 pole relay Nominal voltage Coil code Operating range Resistance Rated coil consumption U N U min U max R I at U N (50 Hz) V V V Ω m R 56 - C coil operating range v ambient temperature pole relay normally open version changeover version R 56 - DC coil operating range v ambient temperature 4 pole relay R 56 - C coil operating range v ambient temperature 4 pole relay - Max. permitted coil voltage. - Min. pick-up voltage with coil at ambient temperature. changeover version - Max. permitted coil voltage. - Min. pick-up voltage with coil at ambient temperature. 5

6 56 56 Miniature power relays ccessories Top flange mount adaptor for with relay with relay Rear flange mount adaptor for with relay with relay Top 35 mm rail (EN 6075) adaptor for with relay with relay Top flange mount adaptor for with relay with relay Top 35 mm rail (EN 6075) adaptor for with relay with relay Sheet of marker tags for relay type 56.34, plastic, 48 tags, 6 x mm, for CEMBRE s thermal transfer printers

7 96 Sockets and accessories for 56 series relays pprovals pprovals Screw terminal (Box clamp) socket panel or 35 mm rail mount (EN 6075) 96.0 Blue Black Blue For relay type ccessories Metal retaining clip (supplied with socket - packaging code SM) Plastic retaining and release clip (supplied with socket - packaging code SP) way jumper link Identification tag Modules (see table below) 99.0 Timer modules (see table below) , Sheet of marker tags for retaining and release clip , plastic, 48 tags, 6 x mm, for CEMBRE's thermal transfer printers Rated values 0-50 V Dielectric strength kv C Protection category IP 0 mbient temperature C (see diagram L96) Screw torque Nm 0.8 Wire strip length mm 8 Max. wire size for 94.0/04 sockets solid wire stranded wire mm x 6 / x.5 x 4 / x.5 WG x 0 / x 4 x / x Black L 96 - Rated current vs ambient temperature Rated current () E U R O P E N P T E N T E U R O P E N 6-way jumper link for 96.0 socket (blue) (black) Rated values 0-50 V pprovals DC Modules with non-standard polarity (+) on request. 86 series timer modules Multi-voltage: ( 40)V C/DC; Multi-functions: I, DI, SW, BE, CE, DE, EE, FE; (0.05 s 00 h) ( 4)V C/DC; Bi-function: I, DI; (0.05 s 00 h) (0 5)V C; Bi-function: I, DI; (0.05 s 00 h) (30 40)V C; Bi-function: I, DI; (0.05 s 00 h) pprovals 99.0 coil indication and EMC suppression modules for 96.0 and sockets Diode (+, standard polarity) (6 0)V DC LED (6 4)V DC/C LED (8 60)V DC/C LED (0 40)V DC/C LED + Diode (+, standard polarity) (6 4)V DC LED + Diode (+, standard polarity) (8 60)V DC LED + Diode (+, standard polarity) (0 0)V DC LED + Varistor (6 4)V DC/C LED + Varistor (8 60)V DC/C LED + Varistor (0 40)V DC/C RC circuit (6 4)V DC/C RC circuit (8 60)V DC/C RC circuit (0 40)V DC/C Residual current by-pass (0 40)V C

8 56 96 Sockets and accessories for 56 series relays 96.7 pprovals Screw terminal (Plate clamp) socket panel or 35 mm rail (EN 6075) mount 96.7 Blue Black Blue For relay type ccessories Metal retaining clip (supplied with socket - packaging code SM) Modules (see table below) 99.0 Rated values - 50 V Dielectric strength kv C Protection category IP 0 mbient temperature C Screw torque Nm 0.8 Wire strip length mm 0 Max. wire size for 96.7 and sockets solid wire stranded wire mm x 4 / x 4 x 4 / x.5 WG x / x x / x Black pprovals pprovals * Modules in Black housing are available on request. Green LED is standard. Red LED available on request coil indication and EMC suppression modules for types 96.7 and sockets Blue* Diode (+, standard polarity) (6 0)V DC Diode (+, non-standard polarity) (6 0)V DC LED (6 4)V DC/C LED (8 60)V DC/C LED (0 40)V DC/C LED + Diode (+, standard polarity) (6 4)V DC LED + Diode (+, standard polarity) (8 60)V DC LED + Diode (+, standard polarity) (0 0)V DC LED + Diode (+, non-standard polarity) (6 4)V DC LED + Diode (+, non-standard polarity) (8 60)V DC LED + Diode (+, non-standard polarity) (0 0)V DC LED + Varistor (6 4)V DC/C LED + Varistor (8 60)V DC/C LED + Varistor (0 40)V DC/C RC circuit (6 4)V DC/C RC circuit (8 60)V DC/C RC circuit (0 40)V DC/C Residual current by-pass (0 40)V C

9 96 Sockets and accessories for 56 series relays pprovals PCB socket 96. (blue) (blue) 96.4 (blue) For relay type ccessories Rated values 5-50 V Dielectric strength kv C Protection category IP 0 mbient temperature C (blue) Copper side view 96. Copper side view 96.4 Packaging codes How to code and identify retaining clip and packaging options for sockets. Example: S M Standard packaging SM Metal retaining clip SP Plastic retaining clip Without retaining clip 9

10

62.22 Copper side view

62.22 Copper side view 62 Power relays 16 62 Printed circuit mount 16 Power relay 2 & 3 Pole changeover contacts or NO ( 3 mm contact gap) C coils & DC coils Reinforced insulation between coil and contacts according to EN 60335-1,

More information

62 Series - Power relays 16 A. Features SERIES / / Printed circuit mount 16 A Power relay

62 Series - Power relays 16 A. Features SERIES / / Printed circuit mount 16 A Power relay 62 Series - Power relays 16 62 SERIES Features 62.22 / 62.23 62.22-0300 / 62.23-0300 Printed circuit mount 16 Power relay 2 & 3 Pole changeover contacts or NO ( 3 mm contact gap) C coils & DC coils Reinforced

More information

62 Series - Power relays 16 A. Features / /

62 Series - Power relays 16 A. Features / / 6 Series - Power relays 6 A Features 6. / 6.3 6.-0300 / 6.3-0300 Printed circuit mount 6 A Power relay & 3 Pole changeover contacts or NO ( 3 mm contact gap) AC coils & DC coils Reinforced insulation between

More information

60 Series - General purpose relays 6-10 A. Features Plug-in mount 10 A General purpose relay

60 Series - General purpose relays 6-10 A. Features Plug-in mount 10 A General purpose relay Series - General purpose relays - 0 A Features Plug-in mount 0 A General purpose relay.. & pole changeover contacts Cadmium Free contacts (preferred version) AC coils & DC coils UL Listed (certain relay/socket

More information

3.5 mm contact pin pitch 1 Pole 12 A PCB direct or via socket

3.5 mm contact pin pitch 1 Pole 12 A PCB direct or via socket 41 Low profile PCB relays 8-12 - 16 41 1 & 2 Pole - Low profile (15.7 mm height) 41.31-1 Pole 12 (3.5 mm pin pitch) 41.52-2 Pole 8 (5 mm pin pitch) 41.61-1 Pole 16 (5 mm pin pitch) PCB mount - direct or

More information

A rated contacts Flange mount/faston 250 (6.3 x 0.8 mm) connection

A rated contacts Flange mount/faston 250 (6.3 x 0.8 mm) connection 65 Power relays 20-30 65 20 Power relays 1 NO + 1 NC (SPST-NO + SPST-NC) 65.31 Flange mount Faston 250 connections 65.61 PCB mount C coils & DC coils Cadmium Free option available 65.31 65.61 20 rated

More information

A rated contacts PCB mount - bifurcated terminals. Copper side view

A rated contacts PCB mount - bifurcated terminals. Copper side view 66 Power relays 30 66 2 Pole Changeover (DPDT) 30 Power relay 66.22 PCB connections & mount 66.82 Faston 250 connections - Flange mount Reinforced insulation between coil and contacts according to EN 60335-1;

More information

48 Series - Relay interface modules A. Features

48 Series - Relay interface modules A. Features Series - Relay interface modules 8-0 - 6 A Features & Pole relay interface modules, 5.8 mm wide. Ideal interface for PLC and electronic systems.3 - Pole 0 A.5 - Pole 8 A.6 - Pole 6 A coils or sensitive

More information

30 A rated contacts Flange mount Faston 250 connections. 30 A rated contacts PCB mount - bifurcated terminals. Copper side view

30 A rated contacts Flange mount Faston 250 connections. 30 A rated contacts PCB mount - bifurcated terminals. Copper side view 66 Series - Power relays 30 A Features 66.22 66.82 2 Pole Changeover (DPDT) 30 A Power relay 66.22 PCB connections & mount 66.82 Faston 250 connections - Flange mount Reinforced insulation between coil

More information

2 Pole CO, 8 A Plug-in 2 CO (DPDT) 1 CO (SPDT) 8/15 16/25* 250/ /400 2,000 4, /0.5/ /0.5/ (5/5) 300 (10/5)

2 Pole CO, 8 A Plug-in 2 CO (DPDT) 1 CO (SPDT) 8/15 16/25* 250/ /400 2,000 4, /0.5/ /0.5/ (5/5) 300 (10/5) 46 Series - Relays for railway applications 8-16 A 46 SERIES Features Plug-in power relays: 8 A, 2 pole 16 A, 1 pole Complies with EN 45545-2:2013 (protection against fire of materials), EN 61373 (resistance

More information

3.5 mm contact pin pitch 1 Pole 12 A PCB direct or via socket

3.5 mm contact pin pitch 1 Pole 12 A PCB direct or via socket 41 Series - Low profile PCB relays 8-12 - 16 A Features 41.31 41.52 41.61 1 & 2 Pole - Low profile (15.7 mm height) 41.31-1 Pole 12 A (3.5 mm pin pitch) 41.52-2 Pole 8 A (5 mm pin pitch) 41.61-1 Pole 16

More information

Relè di potenza 30 A SЕRIES. Power. generators. Industrial washing machines. Burners, boilers and furnaces. Industrial furnaces and ovens

Relè di potenza 30 A SЕRIES. Power. generators. Industrial washing machines. Burners, boilers and furnaces. Industrial furnaces and ovens 66 SЕRIES Relè di potenza 30 Power generators Industrial washing machines Burners, boilers and furnaces Industrial furnaces and ovens ir conditioners Hoists and cranes Back-up generators Industrial motors

More information

48 SERIES. Relay interface modules 8 A CO forcibly guided contacts relay interface modules,15.8 mm wide Type 48.12

48 SERIES. Relay interface modules 8 A CO forcibly guided contacts relay interface modules,15.8 mm wide Type 48.12 48 Relay interface modules 8 A 48 2 CO forcibly guided contacts relay interface modules,15.8 mm wide Type 48.12 2 CO 8 A s Relay with forcibly guided contacts according to EN 50205 Type 35 mm rail (EN

More information

Relay interface modules A

Relay interface modules A 4C SЕRIES Relay interface modules 8-10 - 16 A Escalators Road / tunnel lighting Hoists and cranes Carousel warehouses Control panels Panels for electrical distribution FINDER reserves the right to alter

More information

58 SERIES. Relay interface modules 7-10 A 58.P3 58.P4

58 SERIES. Relay interface modules 7-10 A 58.P3 58.P4 58 58 3 & 4 CO relay interface modules, 31 mm wide with Push-in terminals Ideal interface for PLC and electronic systems 58.P3 58.P4 Type 58.P3 3 CO 10 A Push-in terminals Type 58.P4 4 CO 7 A Push-in terminals

More information

3.5 mm contact pin pitch 1 Pole 12 A PCB direct or via socket

3.5 mm contact pin pitch 1 Pole 12 A PCB direct or via socket 8-12 - 16 A Features 41.31 41.52 41.61 1 & 2 Pole - Low profile (15.7 mm height) 41.31-1 Pole 12 A (3.5 mm pin pitch) 41.52-2 Pole 8 A (5 mm pin pitch) 41.61-1 Pole 16 A (5 mm pin pitch) PCB mount - direct

More information

mm wide Low coil power PCB or 93 series sockets. Copper side view. 1 CO (SPDT) 6/10 250/400 1, /0.2/ (12/10) AgNi

mm wide Low coil power PCB or 93 series sockets. Copper side view. 1 CO (SPDT) 6/10 250/400 1, /0.2/ (12/10) AgNi 34 Series - Slim electromechanical PCB relays 6 A Features 34.51 Ultra-slim 1 Pole - 6 A relay Printed circuit mount - direct or via PCB socket 35 mm rail mount - via screw or screwless sockets 1 Pole

More information

38 Series - Relay interface modules A. Features /

38 Series - Relay interface modules A. Features / Series - Relay interface modules 0.1-2 - 6-8 A Features 1 Pole - 6 A electromechanical relay interface modules, 6.2 mm wide. Ideal interface for PLC and electronic systems Sensitive DC coil or coil versions

More information

The power in relays and timers since Catalogue

The power in relays and timers since Catalogue The power in relays and timers since 1954 2012 Catalogue PCB relays Industrial relays Relay interface modules Sockets and accessories Timers Monitoring relays Energy meters Surge protection devices Industrial

More information

38 Series - Relay interface modules A

38 Series - Relay interface modules A 38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical Relays

More information

38 Series - Relay interface modules A

38 Series - Relay interface modules A 38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit 6.2 mm wide EMR - DC, AC or AC/DC

More information

38 SERIES. Relay interface modules A. EMR Electromechanical Relays. Common features. SSR Solid State Relays. 6.

38 SERIES. Relay interface modules A. EMR Electromechanical Relays. Common features. SSR Solid State Relays. 6. 38 Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit 6.2 mm wide EMR - DC, AC or AC/DC

More information

40 Series - Miniature P.C.B. Relays A

40 Series - Miniature P.C.B. Relays A ..4..4..4 40 Series - Miniature P.C.B. Relays 8-0 - 6 A - P.C.B. or plug-in mount - AC, DC, sensitive DC or single bistable coil versions available - 8 mm, 6 kv (./0 µs) between coil and contacts - Ambient

More information

38 Series - Relay Interface Modules A

38 Series - Relay Interface Modules A Series - Relay Interface Modules 0.1-2 - 6 A - Relay interface modules for use with PLC systems, mm wide - Sensitive DC coil or AC/DC coil version - Supplied with integral coil - Instant removal of relay

More information

MasterINTERFACE 39 Series - Relay interface modules

MasterINTERFACE 39 Series - Relay interface modules Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy ejection by plastic clip Dual screw head (blade+cross)

More information

2 pole (1 NO + 1 NC) 1 NO + 1 NC 2 NO + 2 NC, 3 NO + 1 NC 4 NO + 2 NC Rated current / Max. peak current Rated load AC1

2 pole (1 NO + 1 NC) 1 NO + 1 NC 2 NO + 2 NC, 3 NO + 1 NC 4 NO + 2 NC Rated current / Max. peak current Rated load AC1 Features 7S.12...5110 7S.14...0220/0310 7S.16..0420 Relay module with forcibly guided contacts 7S.12 with 2 pole (1NO + 1 NC) 7S.14 with 4 pole (2 NO + 2 NC and 3 NO + 1 NC) 7S.16 with 6 pole (4 NO + 2

More information

MasterINTERFACE 39 Series - Relay interface modules

MasterINTERFACE 39 Series - Relay interface modules MasterINTERFACE 39 Series - Relay interface modules Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy

More information

Multi-voltage Multi-function. Wiring diagram (without control signal)

Multi-voltage Multi-function. Wiring diagram (without control signal) 80 Modular timers 16 A 80 Multi-function and mono-function timer range 80.01T - Multi-function & multi-voltage 80.11T - On-delay, multi-voltage Complies with EN 45545-2:2013 (protection against fire of

More information

83 Series - Modular timers 16 A. Features

83 Series - Modular timers 16 A. Features Features 83 Series - Modular timers 16 A 83.11 Multi-function and mono-function timer range - Multi-function & multi-voltage 83.11 - delay, multi-voltage 22.5 mm wide Six time scales from 0.1s to 20h High

More information

Modular timers A

Modular timers A Modular timers 1-6 - 8-16 A Building automation Elevators and lifts 80 SЕRIES Automation for blinds, grilles and shutters oists and cranes Panels for electrical distribution Door and gate openers FINDER

More information

Modular step relays 16 A

Modular step relays 16 A Automation for blinds, grilles and shutters Lighting control in corridors (for hotels, offices and hospitals) Bedroom light control Living room light control SЕRIES FINDER reserves the right to alter characteristics

More information

83 SERIES. 83 Series - Modular timers A. Features

83 SERIES. 83 Series - Modular timers A. Features Features 83 Series - Modular timers 12-16 A 83.01 83.02 83 Multi-function timer range 83.01 - Multi-function & multi-voltage, 1 Pole 83.02 - Multi-function & multi-voltage, 2 Pole (timed + instantaneous

More information

Multi-function 11 pin Plug-in for use with 90 series sockets

Multi-function 11 pin Plug-in for use with 90 series sockets 88 88 Multi-voltage and multi-function timer range Front panel or socket mount 8 and 11 pin plug-in versions available Time scales from 0.05 s to 100 h 1 delayed contact +1 instantaneous contact version

More information

Multi-voltage Multi-function. BE: Off-delay with control signal BE: Off-delay with control signal CE: On- and off-delay with control signal

Multi-voltage Multi-function. BE: Off-delay with control signal BE: Off-delay with control signal CE: On- and off-delay with control signal 83 Modular timers 12-16 A 83 Multi-function timer range 83.01 - Multi-function & multi-voltage, 1 Pole 83.02 - Multi-function & multi-voltage, 2 Pole (timed + instantaneous options), external time setting

More information

Step relays 10 A SЕRIES. Lighting control in corridors (for hotels, offices and hospitals) Bedroom light control. Living room light control

Step relays 10 A SЕRIES. Lighting control in corridors (for hotels, offices and hospitals) Bedroom light control. Living room light control Lighting control in corridors (for hotels, offices and hospitals) Bedroom light control Living room light control SЕRIES FINDER reserves the right to alter characteristics at any time without notice. FINDER

More information

Relays, Timers, Interface Modules, Sockets and Accessories Catalogue. The power in relays and timers since 1954

Relays, Timers, Interface Modules, Sockets and Accessories Catalogue. The power in relays and timers since 1954 Relays, imers, Interface Modules, Sockets and Accessories. 003-004 Catalogue he power in relays and timers since 954 he power in relays ISO 900 ISO 400 Our four factories produce over 50,000 relays every

More information

Multi-function (MI, ME, M2, M1) 2 NO (2 SPST-NO) 12 / / 400 3,000 1, / 0.3 / (5 / 5) AgNi

Multi-function (MI, ME, M2, M1) 2 NO (2 SPST-NO) 12 / / 400 3,000 1, / 0.3 / (5 / 5) AgNi Features Special relay for alternating loads, for applications with pumps, compressors, air conditioning or refrigeration units 2 independent NO output, 12 A 4 functions 2 independent control signals,

More information

Relays, imers, Interface Modules, Sockets and Accessories. 003-004 Catalogue he power EL: in 0755-83376489 relays and timers since 954 E-MAIL: E-MAIL: he power in relays ISO 900 ISO 400 Our four factories

More information

Rated power VA (50 Hz)/W 0.6/ / / /0.3 Operating range V AC (50/60 Hz)

Rated power VA (50 Hz)/W 0.6/ / / /0.3 Operating range V AC (50/60 Hz) 77 Modular Solid State Relay 5 A 77 5 A modular SSR, 1 NO AC output 17.5 mm housing 60 to 240 V AC output (with back to back SCR) 5 kv (1.2/50 µs) insulation between and Output Zero-crossing and random

More information

No-wear isolation of potentials in terminal block design

No-wear isolation of potentials in terminal block design TERMOPTO Overview No-wear isolation of potentials in terminal block design Space saving solid-state relay with PUSH IN connection technology The TERMOPTO opto modules are characterised by a particularly

More information

46 SERIES. Fast, Reliable and Secure Connections. Miniature industrial relays. The power in relays and timers since 1954

46 SERIES. Fast, Reliable and Secure Connections. Miniature industrial relays. The power in relays and timers since 1954 SERIES Fast, Reliable and Secure Connections Miniature industrial relays The power in relays and timers since 9 Series - Miniature industrial relays, - A Features & Pole relay range. - Pole A. - Pole A

More information

Output of three-phase motors at 50 Hz and 400 V

Output of three-phase motors at 50 Hz and 400 V RT0, RH Coupling Relays (Interfaces) Description DC operation IEC 0 947 and EN 0 947 (VDE 00) The RT0 coupling relays for switching motors and RH for auxiliary circuits are laid out to the special requirements

More information

77 Series - Modular Solid State Relay 5 A. Features. Timers and Monitoring relays

77 Series - Modular Solid State Relay 5 A. Features. Timers and Monitoring relays Series - Modular Solid State Relay 5 A 77 Features 77.01.x.xxx.8050 77.01.x.xxx.8051 5 A modular SSR, 1 NO output 17.5 mm housing 60 to 240 V AC output (with back to back SCR) 5 kv (1.2/50 μs) insulation

More information

SMARTimer, digital timer 16 A

SMARTimer, digital timer 16 A SMARTimer, digital timer 16 A Timers and lighting controls Automatic car-washes 84 SЕRIES Labelling machines Punches, cleaners, planers and sanders Industrial furnaces and ovens Discotheques, swimming

More information

V DC 4 POLE RELAY RC V DC 4 POLE RELAY (RC) V AC 4 POLE RELAY

V DC 4 POLE RELAY RC V DC 4 POLE RELAY (RC) V AC 4 POLE RELAY DT SHEET Plug-in power relays Order code Manufacturer code Description -.. V DC POLE RELY RC -.. V DC POLE RELY (RC) -.. V C POLE RELY Plug-in power relays The enclosed information is believed to be correct,

More information

05/09/2014

05/09/2014 48 x 48 Digital LCD Timer 814 Part number 88857005 Relay output digital timers LCD or LED (815E) Multi-range Multi-voltage 1 or 2 relay outputs Reset function on panel (Timers 815, 815E) Data saved in

More information

Fixed - Over/Under voltage limits, ( ) U N respectivity Link selectable - 5 min or 10 min delay. Fixed limits

Fixed - Over/Under voltage limits, ( ) U N respectivity Link selectable - 5 min or 10 min delay. Fixed limits Features 71.11.8.230.0010 71.11.8.230.1010 1 - Phase 230 V Over & Under voltage monitoring relays 71.11.8.230.0010 - Fixed Over & Under voltage detection - Link selectable 5 or 10 minute lock-out delay

More information

Relays & Sockets RU Series Universal Relays. With Latching or Momentary Lever. Standard (without lever) Key features:

Relays & Sockets RU Series Universal Relays. With Latching or Momentary Lever. Standard (without lever) Key features: RU Series Universal Relays Key features: Full featured universal miniature relays Designed with environment taken into consideration Two terminal styles: plug-in and PCB mount Non-polarized LED indicator

More information

Fixed - Over/Under voltage limits, ( ) U N respectivity Link selectable - 5 min or 10 min delay. Fixed limits

Fixed - Over/Under voltage limits, ( ) U N respectivity Link selectable - 5 min or 10 min delay. Fixed limits Features 71.11.8.230.0010 71.11.8.230.1010 1 - Phase 230 V Over & Under voltage monitoring relays 71.11.8.230.0010 - Fixed Over & Under voltage detection - Link selectable 5 or 10 minute lock-out delay

More information

RXG21BD interface plug-in relay - Zelio RXG - 2 C/O standard - 24V DC - 5A - with LTB

RXG21BD interface plug-in relay - Zelio RXG - 2 C/O standard - 24V DC - 5A - with LTB Characteristics interface plug-in relay - Zelio RXG - 2 C/O standard - 24V DC - 5A - with LTB Main Range of product Series name Product or component type Device short name Contacts type and composition

More information

Multi-function 11 pin Plug-in for use with 90 series sockets

Multi-function 11 pin Plug-in for use with 90 series sockets 88 eries - lug-in timers 5-8 A Features 88.02 88.12 Multi-voltage and multi-function timer range Front panel or socket mount 8-11 pin plug-in version available ime scales from 0.05s to 100h 1 delayed contact

More information

Two-way Action Test Button (Models with Lockable Test Button) For Momentary Operation

Two-way Action Test Button (Models with Lockable Test Button) For Momentary Operation General Purpose Relays MKS Exceptionally Reliable General Purpose Relay now available with Lockable Test Button IEC Rating of A 0 V AC 0/0 Hz, General use 100,000 cycles. Mechanical indicator standard

More information

Electronic step, call/reset and monostable relays

Electronic step, call/reset and monostable relays Electronic step, call/reset and monostable relays W/C Call and reset switches for bathrooms Bathrooms lighting control Bedroom light control Living room light control Office lighting control SЕRIES FINDER

More information

Rated power VA (50 Hz)/W 0.6/ / / /0.3 Operating range V AC (50/60 Hz)

Rated power VA (50 Hz)/W 0.6/ / / /0.3 Operating range V AC (50/60 Hz) Modular 5 A 5 A modular SSR, 1 NO AC output 17.5 mm housing 60 to 240 V AC output (with back to back SCR) 5 kv (1.2/50 µs) insulation between and Output Zero-crossing and random switch-on versions available

More information

13 SERIES. Electronic step relays A

13 SERIES. Electronic step relays A 13 Electronic step relays 10-16 A 13 13.81 - Electronic step relay - Rail mount - 1 Pole 13.91 - Electronic step relay and timing step relay Switch box mount - 1 Pole Fixed time (10 minutes) timing function

More information

87 Series - Modular timers 5-8 A. Features

87 Series - Modular timers 5-8 A. Features 87 eries - Modular timers 5-8 A Features 87.01 87.02 Mono-function and multi-function timer range mm wide 87.01-1 Pole - Multi-function and multi-voltage 87.02-2 Pole - Multi-function and multi-voltage,

More information

MK-S (New Models) General-purpose Relays. New Super MK Relays. Models with Latching Lever Added to the Series. Features. Model Number Structure

MK-S (New Models) General-purpose Relays. New Super MK Relays. Models with Latching Lever Added to the Series. Features. Model Number Structure General-purpose Relays MK-S (New Models) CSM_MK-S_DS_E 1 New Super MK Relays. Latching Lever Added to the Series. Same mounting and internal wiring as the previous Super MK Relays Built-in mechanical indicator

More information

CONTA-ELECTRONICS. Relay systems

CONTA-ELECTRONICS. Relay systems CONTA-ELECTRONICS Relay technology continues to play a large role in the reliability of industrial control and automation solutions. Because of their thin design, relay couplers are suitable for use in

More information

24 V DC, 12 W output 12 V DC, 12 W output 24 V DC, 36 W output

24 V DC, 12 W output 12 V DC, 12 W output 24 V DC, 36 W output 78 78 12 W and 36 W Low profile Modular Power Supplies for electrical cabinets Type 78.12.2400 - Output 24 V, 12 W - 17.5 mm (1 module) x 61 mm deep Type 78.12.1200 - Output 12 V, 12 W - 17.5 mm (1 module)

More information

Power PCB Relay. To Order: Select the part number and add the desired coil voltage rating (e.g., G6B-1114-US-DC6).

Power PCB Relay. To Order: Select the part number and add the desired coil voltage rating (e.g., G6B-1114-US-DC6). Power PCB Relay Subminiature 20 L x 9.90 W x 9.90 H mm (0.79 L x 0.39 W x 0.39 H in) Low power consumption (200 mw) Sealed construction permits automatic soldering and cleaning of the PC board High-capacity

More information

Relay systems. Interface Relay Compact IRC, Multifunction Timing Relay MFR IRC

Relay systems. Interface Relay Compact IRC, Multifunction Timing Relay MFR IRC Interface Relay Compact IRC, Multifunction Timing Relay MFR IRC IRC relay couplers and MFR-IRCP timing relays embody a new strategy for 6.2 mm coupling relays. Our five different relay versions provide

More information

Electronic timer CT-SDS.22

Electronic timer CT-SDS.22 CDC 0 F0t07 Features Rated control supply voltage 8 V DC, 0 V AC Single function timer with star delta change over One device includes 7 time ranges (0.0 s 0 min) n/o contacts LEDs for status indication

More information

7E Series - Energy meter. Features PTB 1

7E Series - Energy meter. Features PTB 1 Features kwh Energy meter - 1-phase Type 7E.13 5(32) - 1 module wide Type 7E.16 10(65) - 2 module wide Complies with E 62053-21 and pre 50470 Complies with the EU MID-directive 2004/22/EG (Measuring Instruments

More information

Model Number Structure

Model Number Structure General-purpose Relay MK-I/-S Electromechanical Relays Exceptionally Reliable General-purpose Relay Features Mechanical Indicator/Push Button Breaks relatively large load currents despite small size. Long

More information

General-purpose Relay

General-purpose Relay General-purpose Relay Exceptionally Reliable General-purpose Relay Features Mechanical Indicator/Push Button Breaks relatively large load currents despite small size. Long life (minimum 0,000 electrical

More information

Electronic timer CT-SDS.22 Star-delta change-over with 2 n/o contacts Data sheet

Electronic timer CT-SDS.22 Star-delta change-over with 2 n/o contacts Data sheet CDC 0 F0t07 Features Rated control supply voltage -8 V DC, -0 V AC Single-function timer with star-delta change-over One device includes 7 time ranges (0.0 s - 0 min) n/o contacts LEDs for status indication

More information

DPDT MY2N-D2 MY2IN-D2 --- (DC only) 4PDT MY4N-D2 MY4IN-D PDT (bifurcated) MY4ZN-D2 MY4ZIN-D2 --- With built-in CR

DPDT MY2N-D2 MY2IN-D2 --- (DC only) 4PDT MY4N-D2 MY4IN-D PDT (bifurcated) MY4ZN-D2 MY4ZIN-D2 --- With built-in CR General-purpose Relay MY New model Versatile and Function-filled Miniature Power Relay for Sequence Control and Power Switching Applications Models with lockable test buttons now available. Many variations

More information

OMRON MK-I / -S RELAY

OMRON MK-I / -S RELAY Issued April 0 0 DATA SHEET OMRON MK-I / -S RELAY Based on OMRON Datasheet General-purpose Relay MK-I/-S 0 Exceptionally Reliable General-purpose Relay Features Mechanical Indicator/Push Button Breaks

More information

RU Series Universal Relays

RU Series Universal Relays Full featured universal miniature relays Designed with environment taken into consideration Two terminal styles: plug-in and PCB mount Non-polarized LED indicator available on plug-in relays No internal

More information

Electronic timer CT-TGD.22

Electronic timer CT-TGD.22 2CDC 251 097 F0t06 a Rotary switch for the preselection of the time range of the ON time b Potentiometer with direct reading scale for the fine adjustment of the ON time c Rotary switch for the preselection

More information

40.4. Control Relays and Timers. Contents. D3PR/D3PF Series. General Purpose Plug-In Relays. Features. Standards and Certifications

40.4. Control Relays and Timers. Contents. D3PR/D3PF Series. General Purpose Plug-In Relays. Features. Standards and Certifications Control Relays and Timers. D Series Relay Contents Description Page DPR/DPF Series................................ DPR/DPF Series................................ DPR/DPF Series Catalog Number Selection........................

More information

CARREL-ELECTRADE LTD not just products... solutions!

CARREL-ELECTRADE LTD not just products... solutions! FINDER S RANGE OF DIN MOUNTED TIMERS 80 & 83 SERIES MULTI-VOLTAGE & MULTI-FUNCTION CARREL-ELECTRADE LTD not just products... solutions! Proudly 100% New Zealand owned and operated Auckland 661 Great South

More information

Short-circuit-proof switching amplifier for inductive loads up to 10 A

Short-circuit-proof switching amplifier for inductive loads up to 10 A MICROOPTO Overview Short-circuit-proof switching amplifier for inductive loads up to 10 Powerful, compact solid-state relay with error signalling contact The MICROOPTO family offers the customer high-quality

More information

Sensitivity range ( ) kω adjustable Delay time (0.5s or 7s) switch selectable Emptying or filling functions switch selectable

Sensitivity range ( ) kω adjustable Delay time (0.5s or 7s) switch selectable Emptying or filling functions switch selectable Features 72.01 72.11 Level control relays for conductive liquids 72.01 - Adjustable sensitivity 72.11 - Fixed sensitivity Emptying or filling functions LED indicator Reinforced insulation (6 kv - 1.2/50

More information

Measuring and monitoring relays CM-SRS.1 Current monitoring relays, single-phase AC/DC

Measuring and monitoring relays CM-SRS.1 Current monitoring relays, single-phase AC/DC 2CDC 251 244 F0t05 Characteristics Monitoring of DC and AC currents: RMS measuring principle One device includes 3 measuring ranges Over- or undercurrent monitoring configurable Hysteresis adjustable from

More information

For non-electrical quantities

For non-electrical quantities Controlgear 3UG3 monitoring relays 3RS17 interface converters N nsb0346h nsb0348h nsb0775h For electrical quantities For non-electrical quantities 3RS17 interface converter Selection and ordering data

More information

Current monitoring relays CM-SRS.1 For single-phase AC/DC currents

Current monitoring relays CM-SRS.1 For single-phase AC/DC currents Data sheet Current monitoring relays CM-SRS.1 For single-phase AC/DC currents The CM-SRS.1 is an electronic current monitoring relay that protects single-phase mains (DC or AC) from over- and undercurrent

More information

Pluggable interface relays CR-P Pcb relays

Pluggable interface relays CR-P Pcb relays 2CDC 293 034 F0004 1 2 4 3 Features 9 different rated control supply voltages U S : DC versions: 12 V, 24 V, 48 V, 110 V AC versions: 24 V, 48 V, 110 V, 120 V, 230 V Output contacts: 1 c/o (16 A) or 2

More information

RT series Miniature Printed Circuit Board Relays, Sockets and Accessories

RT series Miniature Printed Circuit Board Relays, Sockets and Accessories RT series Miniature Printed Circuit oard Relays, Sockets and ccessories pplied Coil Voltage (% of rated nom.) RT series (DC Coil) 6 mp PC oard Miniature Relay Meets VDE 0mm Spacing, KV Dielectric File

More information

Electronic timer CT-SDD.22

Electronic timer CT-SDD.22 CDC 099 F0t0 a Rotary switch for the preselection of the time range b Potentiometer with direct reading scale for the fine adjustment of the time delay c U: green LED V control supply voltage applied W

More information

27/04/2015

27/04/2015 Modular Carril DIN 35 mm HIL Part number 84871120 Control of AC and DC currents Automatic recognition of AC/DC Measurement ranges from 2 ma to 10 A Choice between over and undercurrent True RMS measurement

More information

13 Series - Electronic step/monostable & call/reset relays 8-16 A. Features

13 Series - Electronic step/monostable & call/reset relays 8-16 A. Features 13 Series - Electronic step/monostable & call/reset relays 8-16 A Features 13.01 13.12 13.01 - Quiet operating electronic step/ monostable relay 1 Pole output contact 13.12 - Call & Reset Relay 2 Pole

More information

Solid-state Timer H3DS

Solid-state Timer H3DS Solid-state Timer H3DS DIN Track Mounted, Standard 17.5-mm Width Timer Range A wide AC/DC power supply range (24 to 230 VAC/ 24 to 48 VDC) reduces the number of timer models kept in stock. (24 to 230 VAC/VDC

More information

3.4. Control Relays and Timers. Contents Description D5RR/D5RF Series... D7PR/D7PF Series. General Purpose Plug-In Relays

3.4. Control Relays and Timers. Contents Description D5RR/D5RF Series... D7PR/D7PF Series. General Purpose Plug-In Relays .4 D7 Series Relay Contents Description D1RR/D1RF Series......................... D2RR/D2RF Series......................... DRR/DRF Series......................... D4 Series................................

More information

Current monitoring relays CM-SRS.2 for single-phase AC/DC currents

Current monitoring relays CM-SRS.2 for single-phase AC/DC currents Data sheet Current monitoring relays CM-SRS.2 for single-phase AC/DC currents For the monitoring of currents in single-phase AC/DC systems, ABB s CM range comprises a wide selection of powerful and compact

More information

Current monitoring relays CM-SRS.1 for single-phase AC/DC currents

Current monitoring relays CM-SRS.1 for single-phase AC/DC currents Data sheet Current monitoring relays CM-SRS.1 for single-phase AC/DC currents For the monitoring of currents in single-phase AC/DC systems, ABB s CM range comprises a wide selection of powerful and compact

More information

02/11/2015

02/11/2015 35 mm - 1 Relay 8A OUR3 Part number 88867103 Multi-function or mono-function Multi-range Multi-voltage Relay output 1 or 2 : 8 A - 250 V (10 A UL) LED status indicator Option of connecting an external

More information

46.61 Series, SPDT 16A. Part Number Price Coil Voltage

46.61 Series, SPDT 16A. Part Number Price Coil Voltage www.factorymation.com/relays 85 Miniature Ice Cube Relays Mechanical flag indicator shows contact status Momentary / Lockable test button AgNi contacts (Cadmium free) Operating temperature: 40 to 58 F

More information

SPST-NO SPDT DPST-NO DPDT

SPST-NO SPDT DPST-NO DPDT PCB Relay A Power Relay with Various Models High-sensitivity ( mw) and High-capacity ( A) Models available. Low profile:.7 mm max. in height Conforms to VDE (EN0-), UL and CSA.. Meets EN0- requirements

More information

Model Number Structure. Ordering Information. Solid-state Power OFF-delay Timer H3DE-H. Model Number Legend. List of Models

Model Number Structure. Ordering Information. Solid-state Power OFF-delay Timer H3DE-H. Model Number Legend. List of Models Solid-state Power OFF-delay Timer H3DE-H Timers Two delay-time models available. 0.1 to 12 seconds (S Series) 1 to 120 seconds (L Series) Covers wide range of supply voltage. Model Number Structure Model

More information

Voltage monitoring relays CM-ESS.1 for single-phase AC/DC voltages

Voltage monitoring relays CM-ESS.1 for single-phase AC/DC voltages Data sheet Voltage monitoring relays CM-ESS.1 for single-phase AC/DC voltages For the monitoring of voltages in single-phase AC/DC systems, ABB s CM range comprises a wide selection of powerful and compact

More information

Current monitoring relays CM-SRS.2 For single-phase AC/DC currents

Current monitoring relays CM-SRS.2 For single-phase AC/DC currents Data sheet Current monitoring relays CM-SRS.2 For single-phase AC/DC currents The CM-SRS.2 is an electronic current monitoring relay that protects single-phase mains (DC or AC) from over- and undercurrent

More information

Sensitivity range ( ) kω adjustable Delay time (0.5s or 7s) switch selectable Emptying or filling functions switch selectable

Sensitivity range ( ) kω adjustable Delay time (0.5s or 7s) switch selectable Emptying or filling functions switch selectable 72 Series - Monitoring relays 16 A Features 72.01 72.11 Level control relays for conductive liquids 72.01 - Adjustable sensitivity 72.11 - Fixed sensitivity Emptying or filling functions LED indicator

More information

Current monitoring relays CM-SRS.M1 For single-phase AC/DC currents

Current monitoring relays CM-SRS.M1 For single-phase AC/DC currents Data sheet Current monitoring relays CM-SRS.M1 For single-phase AC/DC currents The CM-SRS.M1 is an electronic current monitoring relay that monitors single-phase mains (DC or AC) for over- and undercurrent

More information

* Short-circuit detection at On pushbutton. Applications. Indication. S M6801_a S11 A3 S12 S21 S23 S22 S (+)

* Short-circuit detection at On pushbutton. Applications. Indication. S M6801_a S11 A3 S12 S21 S23 S22 S (+) Safety technique Emergency stop module BO 5988 safemaster 0221562 Function diagram Pushbutton on Mains or emergencystop () K1 According to EC Directive for machines 98/37/EG According to IEC/E 60204-1

More information

The CWC0 compact contactors are offered as a complete solution for switching and controlling motors.

The CWC0 compact contactors are offered as a complete solution for switching and controlling motors. Compact Contactors The CWC compact contactors are offered as a complete solution for switching and controlling motors. Main Features Contactors with screw s for C-3 operation up to Contactors with spring

More information

Voltage monitoring relay CM-EFS.2 For single-phase AC/DC voltages

Voltage monitoring relay CM-EFS.2 For single-phase AC/DC voltages Data sheet Voltage monitoring relay CM-EFS.2 For single-phase AC/DC voltages The CM-EFS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of

More information

RXG12BD interface plug-in relay - Zelio RXG - 1C/O standard - 24VDC-10A-with LTB and LED

RXG12BD interface plug-in relay - Zelio RXG - 1C/O standard - 24VDC-10A-with LTB and LED Characteristics interface plug-in relay - Zelio RXG - 1C/O standard - 24VDC-10A-with LTB and LED Product availability : Stock - Normally stocked in distribution facility Price* : 7.20 USD Main Range of

More information

Type CP-S, CP-C & CP-A Switch mode

Type CP-S, CP-C & CP-A Switch mode Switch mode power CP-S, CP-C & CP-A Switch mode Characteristics CP-S and CP-C range Output current 5 A, 10 A and 20 A Integrated power reserve of up to 50 % 5 A and 10 A devices with pluggable connecting

More information

Electronic timer CT-MFS.21

Electronic timer CT-MFS.21 2CDC 251 053 F0t07 a Rotary switch for the preselection of the time range b Potentiometer with direct reading scale for the fine adjustment of the time delay c Rotary switch for the preselection of the

More information