48 Series - Relay interface modules A. Features
|
|
- Scott Neal
- 5 years ago
- Views:
Transcription
1 Series - Relay interface modules A Features & Pole relay interface modules, 5.8 mm wide. Ideal interface for PLC and electronic systems.3 - Pole 0 A.5 - Pole 8 A.6 - Pole 6 A coils or sensitive coils Instant ejection of relay using plastic retaining clip Supply status indication and EMC coil suppression module as standard Identification label UL Listed 35 mm rail (EN 500) mounting pole 0 A pole 8 A pole 6 A A A A A + A A A A A A A A /6 3 Contact specification Contact configuration Rated current/maximum peak current A Rated voltage/maximum switching voltage V Rated load Rated load 5 (30 V ) Single phase motor rating (30 V ) kw Breaking capacity : 30/0/0V A Minimum switching load mw (V/mA) Standard contact material Coil specification Nominal voltage (U N ) V (50/60 Hz) V Rated power /sens. (50 Hz)/W Operating range sens. Holding voltage / Must drop-out voltage / Technical data Mechanical life / cycles Electrical life at rated load cycles Operate/release time ms Insulation between coil and contacts (./50 µs) kv Dielectric strength between open contacts V Ambient temperature range C Protection category Approvals relay (according to type) CO (SPDT) CO (DPDT) CO (SPDT) 0/0 8/5 6/30 50/400 50/50 50/400,500,000 4, /0.3/0. 8/0.3/0. 6/0.3/ (5/5) 300 (5/5) 500 (0/5) AgNi AgNi AgCdO /0.5./0.5./0.5 (0.8.)U N (0.8.)U N (0.8.)U N ( )U N ( )U N (0.8.5)U N 0.8 U N /0.4 U N 0.8 U N /0.4 U N 0.8 U N /0.4 U N 0. U N /0. U N 0. U N /0. U N 0. U N /0. U N / / / /4 () - / () 7/4 () - / () 7/4 () - / () 6 (8 mm) 6 (8 mm) 6 (8 mm),000,000, IP 0 IP 0 IP 0 5
2 Series - Relay interface modules A Features Pole relay interface module, 5.8 mm wide. Ideal interface for PLC and electronic systems.6 - Pole 0 A sensitive coil Instant ejection of relay using plastic retaining clip Supply status indication and EMC coil suppression module as standard Identification label Cadmium Free contacts UL Listed 35 mm rail (EN 500) mounting pole 0 A A A + Contact specification Contact configuration Rated current/maximum peak current A Rated voltage/maximum switching voltage V Rated load Rated load 5 (30 V ) Single phase motor rating (30 V ) kw Breaking capacity : 30/0/0V A Minimum switching load mw (V/mA) Standard contact material Coil specification Nominal voltage (U N ) V (50/60 Hz) V Rated power /sens. (50 Hz)/W Operating range sens. Holding voltage / Must drop-out voltage / Technical data Mechanical life / cycles Electrical life at rated load cycles Operate/release time ms Insulation between coil and contacts (./50 µs) kv Dielectric strength between open contacts V Ambient temperature range C Protection category Approvals relay (according to type) CO (DPDT) 0/0 50/400, /0.3/ (5/5) AgNi /0.5 (0.8.5)U N /0.4 U N /0. U N / / () 6 (8 mm), IP 0 6
3 Series - Relay interface modules A Ordering information Example: series, 35 mm rail (EN 500) mount relay interface module, CO (DPDT) 8 A contacts, 4 V sensitive coil, green LED + diode. A B C D Series Type 3 = 35 mm rail mount 5 = 35 mm rail mount 6 = 35 mm rail mount No. of poles = pole for.3, 0 A.6, 6 A = pole for.5, 8 A.6, 0 A, only Coil version 7 = Sensitive 8 = (50/60 Hz) Coil voltage see coil specifications A: Contact material 0 = Standard B: Contact circuit 0 = CO (npdt) D: Special versions 0 = Standard C: Options 5 = Standard for : green LED + diode (polarity +A) 6 = Standard for : green LED + Varistor Technical data Insulation.3/6/6.5.3/5/6/6 Insulation according to EN 680- ed. insulation rated voltage V rated impulse withstand voltage kv pollution degree 3 overvoltage category III III III Insulation between coil and contacts (./50 µs) kv 6 (8 mm) Dielectric strength between open contacts V,000 Dielectric strength between adjacent contacts V,000 (.5);,500 (.6) Conducted disturbance immunity Burst (5...50)ns, 5 khz, on A - A EN level 4 (4 kv) Surge (./50 µs) on A - A (differential mode) EN level 3 ( kv) Other data Bounce time: / ms /5 Vibration resistance (5 55)Hz, max. ± mm: / g/g 0/4 (for pole) 5/3 (for pole) Power lost to the environment without contact current W 0.7 with rated current W. (.3).3 (.5). (.6). (.6) Wire strip length mm 8 Screw torque Nm 0.5 Max. wire size solid cable stranded cable mm x6 / x.5 x4 / x.5 AWG x0 / x4 x / x4 7
4 Series - Relay interface modules A Contact specification F - Electrical life () v contact current Types.3/6 0 7 F - Electrical life () v contact current Type Cycles 0 6 Resistive load - cosϕ = Inductive load- cosϕ = 0.4 Cycles 0 6 Resistive load - cosϕ = Inductive load - cosϕ = 0.4 limit for (A) (A) F - Electrical life () v contact current Types Cycles 0 6 Resistive load - cosϕ = Inductive load - cosϕ = (A) H - Maximum breaking capacity Types.3/5/6 H - Maximum breaking capacity Type.6 breaking current (A) current limit.3 current limit.5 current limit single contact x.5 contacts in series breaking current (A) single contact x.6 contacts in series voltage (V) voltage (V) When switching a resistive load () having voltage and current values under the curve, an electrical life of can be expected. In the case of 3 loads, the connection of a diode in parallel with the load will permit a similar electrical life as for a load. Note: the release time for the load will be increased. When switching a resistive load () having voltage and current values under the curve, an electrical life of can be expected. In the case of 3 loads, the connection of a diode in parallel with the load will permit a similar electrical life as for a load. Note: the release time for the load will be increased. 8
5 Series - Relay interface modules A Coil specifications coil data (0.5 W sensitive) Nominal Coil Operating range Rated coil voltage code consumption U N U min * U max I at U N V V V ma *U min = 0.8 U N for.6 and.6 coil data Nominal Coil Operating range Rated coil voltage code consumption U N U min U max I at U N (50Hz) V V V ma R - coil operating range v ambient temperature R - coil operating range v ambient temperature U U N.0.3/5 U U N.0.5.6/ /6.3/ ( C) ( C) - Max. permitted coil voltage. - Min. pick-up voltage with coil at ambient temperature. - Max. permitted coil voltage. - Min. pick-up voltage with coil at ambient temperature. Combinations Code Type of socket Type of relay Module Retaining clip Accessories way jumper link Rated values 0 A - 50 V Sheet of marker tags, plastic, 7 tags, 6x mm
6 Series - Relay interface modules A Packaging codes How to code and identify retaining clip and packaging options for relay interface module. Code options according to the last three letters: S P A A B Standard packaging Blister packaging SP Plastic retaining clip 30
48 SERIES. Relay interface modules 8 A CO forcibly guided contacts relay interface modules,15.8 mm wide Type 48.12
48 Relay interface modules 8 A 48 2 CO forcibly guided contacts relay interface modules,15.8 mm wide Type 48.12 2 CO 8 A s Relay with forcibly guided contacts according to EN 50205 Type 35 mm rail (EN
More information38 Series - Relay interface modules A. Features /
Series - Relay interface modules 0.1-2 - 6-8 A Features 1 Pole - 6 A electromechanical relay interface modules, 6.2 mm wide. Ideal interface for PLC and electronic systems Sensitive DC coil or coil versions
More informationRelay interface modules A
4C SЕRIES Relay interface modules 8-10 - 16 A Escalators Road / tunnel lighting Hoists and cranes Carousel warehouses Control panels Panels for electrical distribution FINDER reserves the right to alter
More information58 SERIES. Relay interface modules 7-10 A 58.P3 58.P4
58 58 3 & 4 CO relay interface modules, 31 mm wide with Push-in terminals Ideal interface for PLC and electronic systems 58.P3 58.P4 Type 58.P3 3 CO 10 A Push-in terminals Type 58.P4 4 CO 7 A Push-in terminals
More information2 Pole CO, 8 A Plug-in 2 CO (DPDT) 1 CO (SPDT) 8/15 16/25* 250/ /400 2,000 4, /0.5/ /0.5/ (5/5) 300 (10/5)
46 Series - Relays for railway applications 8-16 A 46 SERIES Features Plug-in power relays: 8 A, 2 pole 16 A, 1 pole Complies with EN 45545-2:2013 (protection against fire of materials), EN 61373 (resistance
More information3.5 mm contact pin pitch 1 Pole 12 A PCB direct or via socket
41 Series - Low profile PCB relays 8-12 - 16 A Features 41.31 41.52 41.61 1 & 2 Pole - Low profile (15.7 mm height) 41.31-1 Pole 12 A (3.5 mm pin pitch) 41.52-2 Pole 8 A (5 mm pin pitch) 41.61-1 Pole 16
More information38 Series - Relay interface modules A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical Relays
More information38 Series - Relay interface modules A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit 6.2 mm wide EMR - DC, AC or AC/DC
More information60 Series - General purpose relays 6-10 A. Features Plug-in mount 10 A General purpose relay
Series - General purpose relays - 0 A Features Plug-in mount 0 A General purpose relay.. & pole changeover contacts Cadmium Free contacts (preferred version) AC coils & DC coils UL Listed (certain relay/socket
More information38 Series - Relay Interface Modules A
Series - Relay Interface Modules 0.1-2 - 6 A - Relay interface modules for use with PLC systems, mm wide - Sensitive DC coil or AC/DC coil version - Supplied with integral coil - Instant removal of relay
More informationmm wide Low coil power PCB or 93 series sockets. Copper side view. 1 CO (SPDT) 6/10 250/400 1, /0.2/ (12/10) AgNi
34 Series - Slim electromechanical PCB relays 6 A Features 34.51 Ultra-slim 1 Pole - 6 A relay Printed circuit mount - direct or via PCB socket 35 mm rail mount - via screw or screwless sockets 1 Pole
More information30 A rated contacts Flange mount Faston 250 connections. 30 A rated contacts PCB mount - bifurcated terminals. Copper side view
66 Series - Power relays 30 A Features 66.22 66.82 2 Pole Changeover (DPDT) 30 A Power relay 66.22 PCB connections & mount 66.82 Faston 250 connections - Flange mount Reinforced insulation between coil
More information38 SERIES. Relay interface modules A. EMR Electromechanical Relays. Common features. SSR Solid State Relays. 6.
38 Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit 6.2 mm wide EMR - DC, AC or AC/DC
More information62 Series - Power relays 16 A. Features / /
6 Series - Power relays 6 A Features 6. / 6.3 6.-0300 / 6.3-0300 Printed circuit mount 6 A Power relay & 3 Pole changeover contacts or NO ( 3 mm contact gap) AC coils & DC coils Reinforced insulation between
More information40 Series - Miniature P.C.B. Relays A
..4..4..4 40 Series - Miniature P.C.B. Relays 8-0 - 6 A - P.C.B. or plug-in mount - AC, DC, sensitive DC or single bistable coil versions available - 8 mm, 6 kv (./0 µs) between coil and contacts - Ambient
More information2 or 4 pole changeover contact Plug-in/Faston 187
56 Miniature power relays 56 Plug-in - Power relay, & 4 pole Flange mount option - (Faston 87, 4.8 x 0.5 mm termination) C coils & DC coils Lockable test button and mechanical flag indicator Cadmium Free
More information3.5 mm contact pin pitch 1 Pole 12 A PCB direct or via socket
8-12 - 16 A Features 41.31 41.52 41.61 1 & 2 Pole - Low profile (15.7 mm height) 41.31-1 Pole 12 A (3.5 mm pin pitch) 41.52-2 Pole 8 A (5 mm pin pitch) 41.61-1 Pole 16 A (5 mm pin pitch) PCB mount - direct
More information3.5 mm contact pin pitch 1 Pole 12 A PCB direct or via socket
41 Low profile PCB relays 8-12 - 16 41 1 & 2 Pole - Low profile (15.7 mm height) 41.31-1 Pole 12 (3.5 mm pin pitch) 41.52-2 Pole 8 (5 mm pin pitch) 41.61-1 Pole 16 (5 mm pin pitch) PCB mount - direct or
More information62 Series - Power relays 16 A. Features SERIES / / Printed circuit mount 16 A Power relay
62 Series - Power relays 16 62 SERIES Features 62.22 / 62.23 62.22-0300 / 62.23-0300 Printed circuit mount 16 Power relay 2 & 3 Pole changeover contacts or NO ( 3 mm contact gap) C coils & DC coils Reinforced
More information62.22 Copper side view
62 Power relays 16 62 Printed circuit mount 16 Power relay 2 & 3 Pole changeover contacts or NO ( 3 mm contact gap) C coils & DC coils Reinforced insulation between coil and contacts according to EN 60335-1,
More informationThe power in relays and timers since Catalogue
The power in relays and timers since 1954 2012 Catalogue PCB relays Industrial relays Relay interface modules Sockets and accessories Timers Monitoring relays Energy meters Surge protection devices Industrial
More information2 pole (1 NO + 1 NC) 1 NO + 1 NC 2 NO + 2 NC, 3 NO + 1 NC 4 NO + 2 NC Rated current / Max. peak current Rated load AC1
Features 7S.12...5110 7S.14...0220/0310 7S.16..0420 Relay module with forcibly guided contacts 7S.12 with 2 pole (1NO + 1 NC) 7S.14 with 4 pole (2 NO + 2 NC and 3 NO + 1 NC) 7S.16 with 6 pole (4 NO + 2
More information83 Series - Modular timers 16 A. Features
Features 83 Series - Modular timers 16 A 83.11 Multi-function and mono-function timer range - Multi-function & multi-voltage 83.11 - delay, multi-voltage 22.5 mm wide Six time scales from 0.1s to 20h High
More informationMasterINTERFACE 39 Series - Relay interface modules
Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy ejection by plastic clip Dual screw head (blade+cross)
More informationMasterINTERFACE 39 Series - Relay interface modules
MasterINTERFACE 39 Series - Relay interface modules Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy
More informationA rated contacts Flange mount/faston 250 (6.3 x 0.8 mm) connection
65 Power relays 20-30 65 20 Power relays 1 NO + 1 NC (SPST-NO + SPST-NC) 65.31 Flange mount Faston 250 connections 65.61 PCB mount C coils & DC coils Cadmium Free option available 65.31 65.61 20 rated
More informationA rated contacts PCB mount - bifurcated terminals. Copper side view
66 Power relays 30 66 2 Pole Changeover (DPDT) 30 Power relay 66.22 PCB connections & mount 66.82 Faston 250 connections - Flange mount Reinforced insulation between coil and contacts according to EN 60335-1;
More informationMulti-voltage Multi-function. Wiring diagram (without control signal)
80 Modular timers 16 A 80 Multi-function and mono-function timer range 80.01T - Multi-function & multi-voltage 80.11T - On-delay, multi-voltage Complies with EN 45545-2:2013 (protection against fire of
More information83 SERIES. 83 Series - Modular timers A. Features
Features 83 Series - Modular timers 12-16 A 83.01 83.02 83 Multi-function timer range 83.01 - Multi-function & multi-voltage, 1 Pole 83.02 - Multi-function & multi-voltage, 2 Pole (timed + instantaneous
More informationMulti-function (MI, ME, M2, M1) 2 NO (2 SPST-NO) 12 / / 400 3,000 1, / 0.3 / (5 / 5) AgNi
Features Special relay for alternating loads, for applications with pumps, compressors, air conditioning or refrigeration units 2 independent NO output, 12 A 4 functions 2 independent control signals,
More informationModular step relays 16 A
Automation for blinds, grilles and shutters Lighting control in corridors (for hotels, offices and hospitals) Bedroom light control Living room light control SЕRIES FINDER reserves the right to alter characteristics
More informationRelè di potenza 30 A SЕRIES. Power. generators. Industrial washing machines. Burners, boilers and furnaces. Industrial furnaces and ovens
66 SЕRIES Relè di potenza 30 Power generators Industrial washing machines Burners, boilers and furnaces Industrial furnaces and ovens ir conditioners Hoists and cranes Back-up generators Industrial motors
More informationModular timers A
Modular timers 1-6 - 8-16 A Building automation Elevators and lifts 80 SЕRIES Automation for blinds, grilles and shutters oists and cranes Panels for electrical distribution Door and gate openers FINDER
More informationMulti-voltage Multi-function. BE: Off-delay with control signal BE: Off-delay with control signal CE: On- and off-delay with control signal
83 Modular timers 12-16 A 83 Multi-function timer range 83.01 - Multi-function & multi-voltage, 1 Pole 83.02 - Multi-function & multi-voltage, 2 Pole (timed + instantaneous options), external time setting
More informationStep relays 10 A SЕRIES. Lighting control in corridors (for hotels, offices and hospitals) Bedroom light control. Living room light control
Lighting control in corridors (for hotels, offices and hospitals) Bedroom light control Living room light control SЕRIES FINDER reserves the right to alter characteristics at any time without notice. FINDER
More informationMulti-function 11 pin Plug-in for use with 90 series sockets
88 88 Multi-voltage and multi-function timer range Front panel or socket mount 8 and 11 pin plug-in versions available Time scales from 0.05 s to 100 h 1 delayed contact +1 instantaneous contact version
More informationRelays, Timers, Interface Modules, Sockets and Accessories Catalogue. The power in relays and timers since 1954
Relays, imers, Interface Modules, Sockets and Accessories. 003-004 Catalogue he power in relays and timers since 954 he power in relays ISO 900 ISO 400 Our four factories produce over 50,000 relays every
More informationRelays, imers, Interface Modules, Sockets and Accessories. 003-004 Catalogue he power EL: in 0755-83376489 relays and timers since 954 E-MAIL: E-MAIL: he power in relays ISO 900 ISO 400 Our four factories
More informationFixed - Over/Under voltage limits, ( ) U N respectivity Link selectable - 5 min or 10 min delay. Fixed limits
Features 71.11.8.230.0010 71.11.8.230.1010 1 - Phase 230 V Over & Under voltage monitoring relays 71.11.8.230.0010 - Fixed Over & Under voltage detection - Link selectable 5 or 10 minute lock-out delay
More informationFixed - Over/Under voltage limits, ( ) U N respectivity Link selectable - 5 min or 10 min delay. Fixed limits
Features 71.11.8.230.0010 71.11.8.230.1010 1 - Phase 230 V Over & Under voltage monitoring relays 71.11.8.230.0010 - Fixed Over & Under voltage detection - Link selectable 5 or 10 minute lock-out delay
More informationSensitivity range ( ) kω adjustable Delay time (0.5s or 7s) switch selectable Emptying or filling functions switch selectable
Features 72.01 72.11 Level control relays for conductive liquids 72.01 - Adjustable sensitivity 72.11 - Fixed sensitivity Emptying or filling functions LED indicator Reinforced insulation (6 kv - 1.2/50
More information87 Series - Modular timers 5-8 A. Features
87 eries - Modular timers 5-8 A Features 87.01 87.02 Mono-function and multi-function timer range mm wide 87.01-1 Pole - Multi-function and multi-voltage 87.02-2 Pole - Multi-function and multi-voltage,
More informationMulti-function 11 pin Plug-in for use with 90 series sockets
88 eries - lug-in timers 5-8 A Features 88.02 88.12 Multi-voltage and multi-function timer range Front panel or socket mount 8-11 pin plug-in version available ime scales from 0.05s to 100h 1 delayed contact
More informationSensitivity range ( ) kω adjustable Delay time (0.5s or 7s) switch selectable Emptying or filling functions switch selectable
72 Series - Monitoring relays 16 A Features 72.01 72.11 Level control relays for conductive liquids 72.01 - Adjustable sensitivity 72.11 - Fixed sensitivity Emptying or filling functions LED indicator
More information77 Series - Modular Solid State Relay 5 A. Features. Timers and Monitoring relays
Series - Modular Solid State Relay 5 A 77 Features 77.01.x.xxx.8050 77.01.x.xxx.8051 5 A modular SSR, 1 NO output 17.5 mm housing 60 to 240 V AC output (with back to back SCR) 5 kv (1.2/50 μs) insulation
More information13 Series - Electronic step/monostable & call/reset relays 8-16 A. Features
13 Series - Electronic step/monostable & call/reset relays 8-16 A Features 13.01 13.12 13.01 - Quiet operating electronic step/ monostable relay 1 Pole output contact 13.12 - Call & Reset Relay 2 Pole
More informationCARREL-ELECTRADE LTD not just products... solutions!
FINDER S RANGE OF DIN MOUNTED TIMERS 80 & 83 SERIES MULTI-VOLTAGE & MULTI-FUNCTION CARREL-ELECTRADE LTD not just products... solutions! Proudly 100% New Zealand owned and operated Auckland 661 Great South
More informationTime switches 16 A NEON SЕRIES. Heating and cooling. Shop displays. Lighting for parks. Streetlights and car park lighting.
Heating and cooling NEON Shop displays Lighting for parks SЕRES Streetlights and car park lighting School bells FNDER reserves the right to alter characteristics at any time without notice. FNDER assumes
More informationRated power VA (50 Hz)/W 0.6/ / / /0.3 Operating range V AC (50/60 Hz)
77 Modular Solid State Relay 5 A 77 5 A modular SSR, 1 NO AC output 17.5 mm housing 60 to 240 V AC output (with back to back SCR) 5 kv (1.2/50 µs) insulation between and Output Zero-crossing and random
More information13 Series - Electronic step relays A. Features Residential applications
13 13 Series - Electronic step relays 10-16 A Features 13.81 13.91 13.81 - Electronic step relay - Rail mount - 1 Pole 13.91 - Electronic step relay and timing step relay Switch box mount - 1 Pole Fixed
More informationSensitivity range ( ) kω adjustable Delay time (0.5s or 7s) switch selectable Emptying or filling functions switch selectable
Features Level control relays for conductive liquids 72.01 - Adjustable sensitivity 72.11 - Fixed sensitivity Emptying or filling functions LED indicator Reinforced insulation (6 kv - 1.2/50 µs) between:
More information13 SERIES. Electronic step relays A
13 Electronic step relays 10-16 A 13 13.81 - Electronic step relay - Rail mount - 1 Pole 13.91 - Electronic step relay and timing step relay Switch box mount - 1 Pole Fixed time (10 minutes) timing function
More information13 Series - Electronic step relays A. Features SERIES
Series - Electronic step relays 10-16 A SERIES Features.81.91.81 - Electronic step relay - Rail mount - 1 Pole.91 - Electronic step relay and timing step relay Switch box mount - 1 Pole Fixed time (10
More informationSMARTimer, digital timer 16 A
SMARTimer, digital timer 16 A Timers and lighting controls Automatic car-washes 84 SЕRIES Labelling machines Punches, cleaners, planers and sanders Industrial furnaces and ovens Discotheques, swimming
More informationMechanical daily time switch. 35 mm rail (EN 60715) mount
SERES SERES Mechanical time switches - Daily time setting* - Weekly time setting**.01.11.31 Type.01 --Daily --1 CO 16 A --35.8 mm wide --35 mm rail mount Type.11 --Daily --1 O 16 A --17.5 mm wide --35
More information46 SERIES. Fast, Reliable and Secure Connections. Miniature industrial relays. The power in relays and timers since 1954
SERIES Fast, Reliable and Secure Connections Miniature industrial relays The power in relays and timers since 9 Series - Miniature industrial relays, - A Features & Pole relay range. - Pole A. - Pole A
More informationThermistor motor protection relays
Thermistor motor protection relays Content Benefits and advantages... / 68 Selection table... / 68 Ordering details CM-MSE... / 69 CM-MSS... / 69 CM-MSN... / 7 PTC sensor C0... / 7 Technical data... /
More informationElectronic step, call/reset and monostable relays
Electronic step, call/reset and monostable relays W/C Call and reset switches for bathrooms Bathrooms lighting control Bedroom light control Living room light control Office lighting control SЕRIES FINDER
More information12 Series - Time switches 16 A. Features
12 12 Series - Time switches 16 A Features Mechanical time switches - Daily time setting * - Weekly time setting ** Type 12.01-1 Pole 16 A CO (SPDT) 35.8 mm width Type 12.11-1 Pole 16 A NO (SPST-NO) 17.6
More informationMeasuring and monitoring relays CM-SRS.1 Current monitoring relays, single-phase AC/DC
2CDC 251 244 F0t05 Characteristics Monitoring of DC and AC currents: RMS measuring principle One device includes 3 measuring ranges Over- or undercurrent monitoring configurable Hysteresis adjustable from
More informationElectronic timer CT-SDS.22
CDC 0 F0t07 Features Rated control supply voltage 8 V DC, 0 V AC Single function timer with star delta change over One device includes 7 time ranges (0.0 s 0 min) n/o contacts LEDs for status indication
More informationElectronic timer CT-TGD.22
2CDC 251 097 F0t06 a Rotary switch for the preselection of the time range of the ON time b Potentiometer with direct reading scale for the fine adjustment of the ON time c Rotary switch for the preselection
More informationCurrent monitoring relays CM-SRS.2 for single-phase AC/DC currents
Data sheet Current monitoring relays CM-SRS.2 for single-phase AC/DC currents For the monitoring of currents in single-phase AC/DC systems, ABB s CM range comprises a wide selection of powerful and compact
More informationThree-phase monitoring relays CM-PFE and CM-PFE.2
Data sheet Three-phase monitoring relays CM-PFE and CM-PFE.2 The CM-PFE is a three-phase monitoring relay that monitors the phase parameter phase sequence and phase failure in three-phase mains. 2CDC 251
More informationVoltage monitoring relays CM-ESS.1 for single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.1 for single-phase AC/DC voltages For the monitoring of voltages in single-phase AC/DC systems, ABB s CM range comprises a wide selection of powerful and compact
More informationElectronic timer CT-SDS.22 Star-delta change-over with 2 n/o contacts Data sheet
CDC 0 F0t07 Features Rated control supply voltage -8 V DC, -0 V AC Single-function timer with star-delta change-over One device includes 7 time ranges (0.0 s - 0 min) n/o contacts LEDs for status indication
More informationThree-phase monitoring relay
1SR 430 824 F9300 Features Monitoring of three-phase mains for phase sequence and failure Powered by the measuring circuit 2 c/o (SPDT) contacts 1 LED for status indication Approvals R: yellow LED - relay
More information24 V DC, 12 W output 12 V DC, 12 W output 24 V DC, 36 W output
78 78 12 W and 36 W Low profile Modular Power Supplies for electrical cabinets Type 78.12.2400 - Output 24 V, 12 W - 17.5 mm (1 module) x 61 mm deep Type 78.12.1200 - Output 12 V, 12 W - 17.5 mm (1 module)
More informationCurrent monitoring relays CM-SRS.1 for single-phase AC/DC currents
Data sheet Current monitoring relays CM-SRS.1 for single-phase AC/DC currents For the monitoring of currents in single-phase AC/DC systems, ABB s CM range comprises a wide selection of powerful and compact
More informationPluggable interface relays CR-P Pcb relays
2CDC 293 034 F0004 1 2 4 3 Features 9 different rated control supply voltages U S : DC versions: 12 V, 24 V, 48 V, 110 V AC versions: 24 V, 48 V, 110 V, 120 V, 230 V Output contacts: 1 c/o (16 A) or 2
More informationType CP-S, CP-C & CP-A Switch mode
Switch mode power CP-S, CP-C & CP-A Switch mode Characteristics CP-S and CP-C range Output current 5 A, 10 A and 20 A Integrated power reserve of up to 50 % 5 A and 10 A devices with pluggable connecting
More informationVEO. V2PF480Y/277VS01 Art.Nr.: B TECHNICAL DATA
Monitoring of phase sequence and phase loss Monitoring of asymmetry Supply voltage 208-480 V AC Supply circuit = measuring circuit 1 change-over contact Width 22,5 mm Status indication LED U: Supply voltage
More informationCurrent monitoring relays CM-SRS.1 For single-phase AC/DC currents
Data sheet Current monitoring relays CM-SRS.1 For single-phase AC/DC currents The CM-SRS.1 is an electronic current monitoring relay that protects single-phase mains (DC or AC) from over- and undercurrent
More informationCurrent monitoring relays CM-SRS.2 For single-phase AC/DC currents
Data sheet Current monitoring relays CM-SRS.2 For single-phase AC/DC currents The CM-SRS.2 is an electronic current monitoring relay that protects single-phase mains (DC or AC) from over- and undercurrent
More informationVoltage monitoring relay CM-EFS.2 For single-phase AC/DC voltages
Data sheet Voltage monitoring relay CM-EFS.2 For single-phase AC/DC voltages The CM-EFS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
More informationABB 1. Multifunctional three-phase monitoring relays. CM-MPS.11, CM-MPS-21, CM-MPS.31 and CM-MPS.41 Data sheet. Features. Approvals. Marks.
2CDC 251 048 F0t08 CM-MPS.11 2CDC 251 049 F0t08 CM-MPS.21 2CDC 251 050 F0t08 CM-MPS.31 2CDC 251 051 F0t08 CM-MPS.41 R/T: yellow LED - relay status, timing F1: red LED - fault message F2: red LED - fault
More informationCM-MPS.11, CM-MPS-21, CM-MPS.31 and CM-MPS.41 Data sheet. UL 508, CAN/CSA C22.2 No.14 GL GOST CB scheme CCC
2CDC 251 048 F0t08 CM-MPS.11 2CDC 251 049 F0t08 CM-MPS.21 Features Monitoring of three-phase mains for phase sequence (can be switched off), phase failure, over- and undervoltage as well as phase unbalance
More informationVoltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages The CM-ESS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
More informationElectronic timer CT-TGD.12 Pulse generator with 1 c/o (SPDT) contact
Data sheet Electronic timer CT-TGD.12 Pulse generator with 1 c/o (SPDT) contact The CT-TGD.12 is an electronic time relay with the function pulse generator. It is from the CT-D range. With their MDRC profile
More informationRelay systems. Interface Relay Compact IRC, Multifunction Timing Relay MFR IRC
Interface Relay Compact IRC, Multifunction Timing Relay MFR IRC IRC relay couplers and MFR-IRCP timing relays embody a new strategy for 6.2 mm coupling relays. Our five different relay versions provide
More informationVEO. V2PF480Y/277VSY01 Art.Nr.: V2PF480Y/277VSY01P Art.Nr.: TECHNICAL DATA
P Monitoring of phase sequence and phase loss Monitoring of asymmetry Supply voltage 208-480 V AC Supply circuit = measuring circuit 1 change-over contact Width 22,5 mm Control elements Asymmetry Status
More informationThree-phase monitoring relays
2CDC 251 046 F0t08 Features Monitoring of three-phase mains for phase sequence, phase failure, phase unbalance Threshold value for phase unbalance adjustable as absolute value Tripping delay can be adjusted
More informationSolid-state Timer H3DS
Solid-state Timer H3DS DIN Track Mounted, Standard 17.5-mm Width Timer Range A wide AC/DC power supply range (24 to 230 VAC/ 24 to 48 VDC) reduces the number of timer models kept in stock. (24 to 230 VAC/VDC
More informationCurrent monitoring relays CM-SRS.M1 For single-phase AC/DC currents
Data sheet Current monitoring relays CM-SRS.M1 For single-phase AC/DC currents The CM-SRS.M1 is an electronic current monitoring relay that monitors single-phase mains (DC or AC) for over- and undercurrent
More informationElectronic timer CT-YDE Star-delta change-over with 1 c/o (SPDT) contact
Data sheet Electronic timer CT-YDE Star-delta change-over with c/o (SPDT) contact The CT-YDE is an electronic time relay with star-delta change-over. It is from the CT-E range. The CT-E range is the economic
More informationABB NEW. Three-phase monitoring relays. CM-PVS.31 and CM-PVS.41 Data sheet. Features J. Approvals. Marks. Order data. Order data - Accessories
2CDC 251 042 F0t08 CM-PVS.31 Features Monitoring of three-phase mains for phase sequence (can be switched off), phase failure, over- and undervoltage Threshold values for over- and undervoltage are adjustable
More informationRated power VA (50 Hz)/W 0.6/ / / /0.3 Operating range V AC (50/60 Hz)
Modular 5 A 5 A modular SSR, 1 NO AC output 17.5 mm housing 60 to 240 V AC output (with back to back SCR) 5 kv (1.2/50 µs) insulation between and Output Zero-crossing and random switch-on versions available
More informationVoltage monitoring relays CM-ESS.M For single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.M For single-phase AC/DC voltages The CM-ESS.M is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
More informationThree-phase monitoring relay CM-PFS
Data sheet Three-phase monitoring relay CM-PFS The CM-PFS is a three-phase monitoring relay that is used to monitor three phase mains for incorrect phase sequence and phase failure. All devices are available
More informationThermistor motor protection relays
Thermistor motor protection relays Content Benefits and advantages... / 68 Selection table... / 68 Ordering details CM-MSE... / 69 CM-MSS... / 69 CM-MSN... / 7 PTC sensor C0... / 7 Technical data... /
More informationElectronic timer CT-EBE Flasher starting with OFF, 1 c/o (SPDT) contact
Data sheet Electronic timer CT-EBE Flasher starting with OFF, 1 c/o (SPDT) contact The CT-EBE is an electronic time relay with the function flasher starting with OFF. It is from the CT-E range. The CT-E
More informationElectronic timer CT-SDD.22
CDC 099 F0t0 a Rotary switch for the preselection of the time range b Potentiometer with direct reading scale for the fine adjustment of the time delay c U: green LED V control supply voltage applied W
More information3RF A A 0 2. Switching function. Control voltage Operating voltage with heat sink 10 = 10.5 A. A = Zero-point switching
Main Characteristics: Zero-point switching LED display Various connection technologies Plug-in control terminal Degree of protection IP 2 Insulated mounting foot Standards / Approvals: DIN EN 697--3 UL
More informationElectronic timer CT-AHS.22 OFF-delayed with 2 c/o (SPDT) contacts
Data sheet Electronic timer CT-AHS.22 OFF-delayed with 2 c/o (SPDT) contacts The CT-AHS.22 is an electronic timer from the CT-S range with true OFF-delay and 10 time ranges. All electronic timers from
More informationV2UM230V10 Art.Nr.: V2UM230V10P Art.Nr.: Control elements. Tripping delay. Function selector. Status indication 230 V AC/DC
P AC/DC voltage monitoring Multifunction Supply voltage 24 V DC or 230V AC/DC Supply circuit = Measuring circuit 1 change-over contact Width 22,5 mm Control elements Tripping delay Maximum threshold Minimum
More informationCONTA-ELECTRONICS. Relay systems
CONTA-ELECTRONICS Relay technology continues to play a large role in the reliability of industrial control and automation solutions. Because of their thin design, relay couplers are suitable for use in
More informationElectronic timer CT-AHS.22 OFF-delayed with 2 c/o (SPDT) contacts
Data sheet Electronic timer CT-AHS.22 OFF-delayed with 2 c/o (SPDT) contacts The CT-AHS.22 is an electronic timer from the CT-S range with OFF-delay and 10 time ranges. All electronic timers from the CT-S
More informationTemperature monitoring relays CM-TCS Monitoring relays for monitoring temperatures with a PT100 sensor (2- or 3-wire connection)
Data sheet Temperature monitoring relays CM-TCS Monitoring relays for monitoring temperatures with a PT100 sensor (2- or 3-wire connection) The temperature monitoring relays CM-TCS monitor overtemperature,
More informationABB NEW. Multifunctional three-phase monitoring relays. CM-MPS.23 and CM-MPS.43 Data sheet. Features J. Approvals. Marks.
2CDC 251 052 F0t08 CM-MPS.23 2CDC 251 053 F0t08 CM-MPS.43 - relay status, timing - fault message - fault message Adjustment of the tripping delay t V Adjustment of the threshold value for overvoltage 6
More informationZelio Control Measurement Relays
Selection Guide Application Voltage control Current control Functions 3-phase Single-phase and d.c. Integrated current transformer - Overvoltage and between phases - Overvoltage and between phases and
More information