40 Series - Miniature P.C.B. Relays A
|
|
- Isabella Wilcox
- 6 years ago
- Views:
Transcription
1 Series - Miniature P.C.B. Relays A - P.C.B. or plug-in mount - AC, DC, sensitive DC or single bistable coil versions available - 8 mm, 6 kv (./0 µs) between coil and contacts - Ambient temperature +8 C - Sockets and accessories: see 9, 99 and 86 series pole, 0 A - 3. mm pinning - PCB / for use with 9 series sockets - pole, 0 A - mm pinning - PCB / for use with 9 series sockets - pole, 8 A - mm pinning - PCB / for use with 9 series sockets A 4 4 A 4 4 A A A 4 A * for 400 V applications, requirements for pollution degree are met. Contact specifications Contact configuration Rated current/maximum peak current A Rated voltage/maximum switching voltage V AC Rated load in AC VA Rated load in AC ( VAC) VA Single phase motor rating ( VAC) kw/hp Breaking capacity in DC: /0/V A Minimum switching load mw (V/mA) Standard contact material Coil specifications Nominal voltage (U N ) V AC (0/60 Hz) V DC Rated power AC/DC/sens. DC VA (0 Hz)/W Operating range AC (0 Hz) DC/sens. DC Holding voltage AC/DC Must drop-out voltage AC/DC Technical data Mechanical life AC/DC cycles Electrical life at rated load AC cycles Operate/release time (bounce included) ms Insulation according to EN 680- Insulation between coil and contacts (./0µs) kv Dielectric strenght between open contacts V AC Ambient temperature range C Protection category Approvals: (according to type) CO (SPDT) CO (SPDT) CO (DPDT) 0/ 0/ 8/ /400* /400* /,00,00, / / /0.4 0/0.3/0. 0/0.3/0. 8/0.3/0. 0 (/) 0 (/) 0 (/) AgNi AgNi AgNi /0.6/0../0.6/0../0.6/0. (0.8.)U N (0.8.)U N (0.8.)U N (0.73.)U N /(0.73.7)U N (0.73.)U N /(0.73.7)U N (0.73.)U N /(0.73.7)U N 0.8 U N /0.4 U N 0.8 U N /0.4 U N 0.8 U N /0.4 U N 0. U N /0. U N 0. U N /0. U N 0. U N /0. U N / / / /0 - (/ sens.) 0/0 - (/ sens.) 0/0 - (/ sens.) 3.6 kv/3 3.6 kv/3 3.6 kv/ 6 (8mm) 6 (8mm) 6 (8mm),000,000, IP 0 IP 0 IP 0 BEAB GOST RINA C US
2 Series - Miniature P.C.B. Relays A - P.C.B. or plug-in mount - AC, DC, sensitive DC or single bistable coil versions available - 8 mm, 6 kv (./0 µs) between coil and contacts - Ambient temperature +8 C - Sockets and accessories: see 9, 99 and 86 series xx.6 - pole, 6 A - mm pinning - PCB / for use with 9 series sockets - Bistable version ( coil) - PCB / for use with 9 series sockets A 4 () 4 (4) Bistable version ( coil) types: () A For wiring diagrams see page 6 * for 400 V applications, requirements for pollution degree are met. Contact specifications Contact configuration Rated current/maximum peak current Rated voltage/maximum switching voltage V AC Rated load in AC Rated load in AC ( VAC) Single phase motor rating ( VAC) Breaking capacity in DC: /0/V Minimum switching load Standard contact material Coil specifications Nominal voltage (U N ) Rated power AC/DC/sens. DC Operating range Holding voltage Must drop-out voltage Technical data Mechanical life AC/DC Electrical life at rated load AC A VA VA kw/hp A mw (V/mA) V AC (0/60 Hz) Operate/release time (bounce included) Insulation according to EN 680- V DC VA (0 Hz)/W AC (0 Hz) DC/sens. DC AC/DC AC/DC cycles cycles ms Insulation between coil and contacts (./0µs) kv Dielectric strenght between open contacts V AC Ambient temperature range C Protection category Approvals: (according to type) CO (SPDT) 6/ /400* See relays 4, / /0.3/ (0/) AgCdO **See below /0.6/0..0/.0/ (0.8.)U N (0.8.)U N (0.73.)U N /(0.8.)U N (0.8.)U N / 0.8 U N /0.4 U N 0. U N /0. U N / 0 6 See relays /0 - (/ sens.) kv/ (8mm) 40.6, Min. impulse duration ms IP 0 BEAB GOST RINA C US ** Nominal voltage (U N ): V DC 3
3 40 Series - Miniature P.C.B. Relays A ORDERING INFORMATION Example: a 40 series P.C.B. relay with CO (DPDT) contacts, with coil rated at V AC. A B C D Series Type 3 P.C.B mm pinning P.C.B. - mm pinning 6 P.C.B. - mm pinning No. of poles CO (SPDT) for: 40.3, 0 A 40., 0 A 40.6, 6 A CO (DPDT) for 40., 8 A Coil version 6 AC/DC bistable 7 Sensitive DC 8 AC (0/60 Hz) 9 DC Coil voltage see coil specifications A: Contact material 0 Standard AgNi for: 40.3// AgCdO for 40.6 AgCdO 4 AgSnO AgNi + Au (µm) B: Contact circuit 0 Standard 3 Contact NO Preferred versions coil version A B C D 40.3/ AC/DC/sens.DC AC/DC/sens.DC AC/DC/sens.DC All versions D: Special applications 0 Standard Sealed version (IP67) 3 High temperature (+ C) sealed version C: Options 0 Standard Only combinations in the same row are possible coil version A B C D 40.3/ AC/sens.DC / DC AC/sens.DC DC AC/sens.DC DC // bistable /6 TECHNICAL DATA INSULATION INSULATION according to EN 680- insulation rated voltage V rated impulse withstand voltage kv 3.6 pollution degree 3 ( CO) (CO) overvoltage category III IMMUNITY CONDUCTED DISTURBANCE IMMUNITY BURST (according to EN ) level 4 (4kV) SURGE (according to EN ) level 3 (kv) OTHER DATA VIBRATION RESISTANCE (0 Hz): NO/NC g/g 0/4 (CO) 3/3 (CO) POWER LOST IN THE ENVIRONMENT without contact current W 0.6 with rated current W. (40.3/) (40.6/) RECOMMENDED DISTANCE between RELAY mounted on P.C.B.s mm 4
4 CONTACT SPECIFICATIONS 40 Series - Miniature P.C.B. Relays A F 40 H 40 CYCLES Electrical life vs AC load. - Type 40. (8 A) - Type (0 A) - Type 40.6 (6 A) AC VERSION DATA LOAD RATED CURRENT (A) COIL SPECIFICATIONS DC VERSION DATA (0.6 W standard) Nominal Coil Operating range Resistance Rated coil voltage code absorption U N U min U max R I at U N V V V Ω ma , , , , , , Nominal Coil Operating range Resistance Rated coil voltage code absorption U N U min U max R I at U N (0Hz) V V V Ω ma , , , , , ,00 4. DC BREAKING CURRENT (A) A B DC VOLTAGE (V) Breaking capacity for DC load. - Type Type Type 40. A - Load applied to contact B - Load applied to contacts in series When switching a resistive load (DC) having voltage and current values under the curve the expected electrical life is cycles. In case of DC3 loads the connection of a diode in parallel with the load will permit the same electrical life as for a DC load. Note: the release time of load will be increase. DC VERSION DATA (0. W sensitive) Nominal Coil Operating range Resistance Rated coil voltage code absorption U N U min * U max ** R I at U N V V V Ω ma , , , , , , , *U min 0.8 U N for 40.6 **U max. U N for
5 COIL SPECIFICATIONS 40 Series - Miniature P.C.B. Relays A R 40 DC R 40 sens. DC U U N.0 U U N // AMBIENT TEMPERATURE ( C) AMBIENT TEMPERATURE ( C) R 40 AC U U N.0 Operating range vs ambient temperature. - Max coil voltage permitted - Min pick-up voltage with coil at ambient temperature AMBIENT TEMPERATURE ( C) 80 BISTABLE COIL SPECIFICATIONS AC/DC VERSION DATA (bistable) Nominal Coil Operating range Resistance Rated coil DC: Release voltage absorption resistance** U N U min U max R I at U N R DC V V V Ω ma Ω ,00 3, , ,00 ** R DC Resistance in DC, R AC.3 x R DC Wiring Diagram for 40 Series bistable coil version AC Operation DC Operation R AC ~.3 R DC D N4007 set D set reset reset V DC R DC V AC R AC On momentary closure of the SET switch the relay is magnetised through the diode and the relay contacts transfer to the set position and remain in this position. On momentary closure of the RESET switch the relay is demagnetised through current limiting resistor (RAC) and the contacts return to the reset position. On momentary closure of the SET switch the relay is magnetised and the relay contacts transfer to the set position and remain in this position. On momentary closure of the RESET switch the relay is demagnetised through limiting resistor (RDC) and the contacts return to the reset position. 6 Notes: The minimum SET or RESET impulse time is ms. The maximum time can be continuous. In practice, always ensure that the SET and RESET contacts cannot be operated simultaneously.
6 9 Series - Sockets and Accessories for 40 Series Relays 9.0 Approvals (according to type): C US Relay type , 40., 40.6 Clamp terminal socket: panel or 3 mm rail (EN 00) mount BLUE BLACK* Retaining and release clip (supplied with socket) Identification tag Modules Timer modules 86.0, , way jumper link for 9.03 and 9.0 sockets RATED VALUES: 0 A - V with a current >0 A, the contact terminal must be connected in parallel ( with, 4 with 4, with ) - INSULATION: 6 kv (./0µs) between coil and contacts - PROTECTION CATEGORY: IP - AMBIENT TEMPERATURE: ( ) C - TORQUE: 0. Nm - MAX WIRE SIZE: solid wire flexible wire mm x6 / x. x4 / x. AWG x0 / x4 x / x Ø Ø COM COM 4 NO 4 4 NO NC NC A COIL 9.03 A COIL Series modules for 9.03 and 9.0 sockets BLUE BLACK* Diode (6...) V DC Diode (inverted polarity) (6...) V DC LED (6...4) V DC/AC LED (8...60) V DC/AC LED (0...40) V DC/AC LED + Diode (6...4) V DC LED + Diode (8...60) V DC LED + Diode (0...) V DC LED + Diode (inverted polarity) (6...4) V DC LED + Diode (inverted polarity) (8...60) V DC LED + Diode (inverted polarity) (0...) V DC LED + Varistor (6...4) V DC/AC LED + Varistor (8...60) V DC/AC LED + Varistor (0...40) V DC/AC RC (6...4) V DC/AC RC (8...60) V DC/AC RC (0...40) V DC/AC No - remanence (0...40) V AC way jumper link for 9.03, and 9.0 sockets RATED VALUES: 0 A - V *Available on request 7
7 9 Series - Sockets and Accessories for 40 Series Relays 9.63 Relay type , 40., 40.6 Clamp terminal socket: panel or 3 mm rail (EN 00) mount BLUE BLACK* Retaining clip (supplied with socket) Modules way jumper link for 9.63 and 9.7 sockets Ø Ø Ø Approvals (according to type): GOST 9.7 C US COM. 4 NC NO COM NO NC COM 4 4 NO RATED VALUES: 0 A - V with a current >0 A, the contact terminal must be connected in parallel ( with, 4 with 4, with ) - INSULATION: 6 kv (./0µs) between coil and contacts - (Types 9.63/7 only) - PROTECTION CATEGORY: IP - AMBIENT TEMPERATURE: ( ) C - TORQUE: 0. Nm - MAX WIRE SIZE: A COIL A 9.6 COIL NC A COIL 9.7 solid wire flexible wire mm x6 / x. x4 / x. AWG x0 / x4 x / x *Available on request 8 99 Series modules for 9.63 and 9.7 sockets BLUE BLACK* Diode (6...) V DC Diode (inverted polarity) (6...) V DC LED (6...4) V DC/AC LED (8...60) V DC/AC LED (0...40) V DC/AC LED + Diode (6...4) V DC LED + Diode (8...60) V DC LED + Diode (0...) V DC LED + Diode (inverted polarity) (6...4) V DC LED + Diode (inverted polarity) (8...60) V DC LED + Diode (inverted polarity) (0...) V DC LED + Varistor (6...4) V DC/AC LED + Varistor (8...60) V DC/AC LED + Varistor (0...40) V DC/AC RC (6...4) V DC/AC RC (8...60) V DC/AC RC (0...40) V DC/AC No - remanence (0...40) V AC
8 9 Series - Sockets and Accessories for 40 Series Relays 8-way jumper link for 9.63, 9.6 and 9.7 sockets RATED VALUES: 0 A - V Relay type , 40., 40.6 P.C.B. socket BLUE BLACK* Metal retaining clip Plastic retaining clip Ø 3. Ø Approvals (according to type): C US RATED VALUES: 0 A - V - INSULATION: 6 kv (./0µs) between coil and contacts - PROTECTION CATEGORY: IP - AMBIENT TEMPERATURE: ( ) C *Available on request 9
9 Series - Low-Profile P.C.B. Relays A - Low-profile, only.7 mm high - DC coil versions - 8 mm, 6 kv(./0 µs) between coil and contacts - Ambient temperature +8 C - Sockets and accessories: see 9 and 99 series pole, A - low profile, 3. mm pinning - PCB / for use with 9 series sockets - pole, 8 A - low profile, mm pinning - PCB / for use with 9 series sockets - pole, 6 A - low profile, mm pinning - PCB / for use with 9 series sockets A 4 4 A A 4 () 4 (4) A 4 A 4 () A * for 400 V applications, requirements for pollution degree are met. Contact specifications Contact configuration Rated current/maximum peak current A Rated voltage/maximum switching voltage V AC Rated load in AC VA Rated load in AC ( VAC) VA Single phase motor rating ( VAC) kw/hp Breaking capacity in DC: /0/V A Minimum switching load mw (V/mA) Standard contact material Coil specifications Nominal voltage (U N ) V AC (0/60 Hz) V DC Rated power AC/sens. DC VA (0 Hz)/W Operating range AC (0 Hz) DC Holding voltage AC/DC Must drop-out voltage AC/DC Technical data Mechanical life AC/DC cycles Electrical life at rated load AC cycles Operate/release time (bounce included) ms Insulation according to EN 680- Insulation between coil and contacts (./0µs) kv Dielectric strenght between open contacts V AC Ambient temperature range C Protection category Approvals: (according to type) CO (SPDT) CO (DPDT) CO (SPDT) / 8/ 6/ /400* /400* /400* 3,000,000 4, / /0. 0./0.7 /0.4/0. 8/0.4/0. 6/0.4/0. 0 (/) 0 (/) 0 (/) AgNi AgNi AgNi /0.4 /0.4 /0.4 (0.7...)U N (0.7...)U N (0.7...)U N /0.4U N /0.4 U N /0.4 U N /0.U N /0. U N /0. U N / 0 6 / 0 6 / /8 7/8 7/8 3.6kV/3 3.6kV/3 3.6kV/3 6 (8mm) 6 (8mm) 6 (8mm),000,000, IP 0 IP 0 IP 0 GOST
10 4 Series - Low-Profile P.C.B. Relays A ORDERING INFORMATION Example: a 4 series low-profile P.C.B. relay with CO (DPDT) contacts, with coil rated 4 V DC. A B C D Series Type 3 P.C.B mm pinning P.C.B. - mm pinning 6 P.C.B. - mm pinning No. of poles CO (SPDT) for 4.3, A 4.6, 6A CO (DPDT) for 4., 8 A Coil version 9 DC Coil voltage see coil specifications A: Contact material 0 AgNi Standard B: Contact circuit 0 Standard D: Special applications 0 Standard C: Options 0 Standard TECHNICAL DATA INSULATION INSULATION according to EN 680- insulation rated voltage V rated impulse withstand voltage kv 3.6 pollution degree 3 overvoltage category III OTHER DATA VIBRATION RESISTANCE (0 Hz): NO/NC g/g / POWER LOST IN THE ENVIRONMENT without contact current W 0.4 with rated current W.7 (4.3). (4.).8 (4.6) RECOMMENDED DISTANCE between RELAY mounted on P.C.B.s mm
11 CONTACT SPECIFICATIONS 4 Series - Low-Profile P.C.B. Relays A F 4 CYCLES Contact life vs AC load. - Type 4. (8 A) at 360 cycles/h. - Type 4.3 ( A) at 360 cycles/h. - Type 4.6 (6 A) at 360 cycles/h LOAD RATED CURRENT (A) H 4 DC BREAKING CURRENT (A) A B DC VOLTAGE (V) Breaking capacity for DC load. - type type type 4. A - load applied to contact B - load applied to contacts in series When switching a resistive load (DC) having voltage and current values under the curve the expected electrical life is cycles. In case of DC3 loads the connection of a diode in parallel with the load will permit the same electrical life as for a DC load. Note: the release time of load will be increase. 3 COIL SPECIFICATIONS DC VERSION DATA Nominal Coil Operating range Resistance Rated coil voltage code absorption U N U min U max R I at U N V V V Ω ma , , , , R 4/ DC R 4/ DC U U N. U U N AMBIENT TEMPERATURE ( C) Type 4. operating range vs ambient temperature. - Max coil voltage permitted - Min pick-up voltage with coil at ambient temperature AMBIENT TEMPERATURE ( C) Type 4.3, 4.6 operating range vs ambient temperature. - Max coil voltage permitted - Min pick-up voltage with coil at ambient temperature
12 9 Series - Sockets and Accessories for 4 Series Relays 9.0 Approvals (according to type): C US Relay type , 4.6 Clamp terminal socket: panel or 3 mm rail (EN 00) mount BLUE BLACK* Identification tag Modules Timer modules 86.0, , way jumper link for 9.03 and 9.0 sockets RATED VALUES: 0 A - V with a current >0 A, the contact terminal must be connected in parallel ( with, 4 with 4, with ) - INSULATION: 6 kv (./0µs) between coil and contacts - PROTECTION CATEGORY: IP - AMBIENT TEMPERATURE: ( ) C - TORQUE: 0. Nm - MAX WIRE SIZE: solid wire flexible wire mm x6 / x. x4 / x. AWG x0 / x4 x / x Ø Ø COM COM 4 NO 4 4 NO NC NC A COIL 9.03 A COIL Series modules for 9.03 and 9.0 sockets BLUE BLACK* Diode (6...) V DC Diode (inverted polarity) (6...) V DC LED (6...4) V DC/AC LED (8...60) V DC/AC LED (0...40) V DC/AC LED + Diode (6...4) V DC LED + Diode (8...60) V DC LED + Diode (0...) V DC LED + Diode (inverted polarity) (6...4) V DC LED + Diode (inverted polarity) (8...60) V DC LED + Diode (inverted polarity) (0...) V DC LED + Varistor (6...4) V DC/AC LED + Varistor (8...60) V DC/AC LED + Varistor (0...40) V DC/AC RC (6...4) V DC/AC RC (8...60) V DC/AC RC (0...40) V DC/AC No - remanence (0...40) V AC way jumper link for 9.03, and 9.0 sockets RATED VALUES: 0 A - V *Available on request 3
13 9 Series - Sockets and Accessories for 4 Series Relays 9.3 Relay type , 4.6 P.C.B. socket BLUE BLACK* Metal retaining clip Plastic retaining clip Ø 3. Ø Approvals (according to type): C US RATED VALUES: 0 A - V - INSULATION: 6 kv (./0µs) between coil and contacts - PROTECTION CATEGORY: IP - AMBIENT TEMPERATURE: ( ) C *Available on request 4
48 Series - Relay interface modules A. Features
Series - Relay interface modules 8-0 - 6 A Features & Pole relay interface modules, 5.8 mm wide. Ideal interface for PLC and electronic systems.3 - Pole 0 A.5 - Pole 8 A.6 - Pole 6 A coils or sensitive
More information48 SERIES. Relay interface modules 8 A CO forcibly guided contacts relay interface modules,15.8 mm wide Type 48.12
48 Relay interface modules 8 A 48 2 CO forcibly guided contacts relay interface modules,15.8 mm wide Type 48.12 2 CO 8 A s Relay with forcibly guided contacts according to EN 50205 Type 35 mm rail (EN
More information2 Pole CO, 8 A Plug-in 2 CO (DPDT) 1 CO (SPDT) 8/15 16/25* 250/ /400 2,000 4, /0.5/ /0.5/ (5/5) 300 (10/5)
46 Series - Relays for railway applications 8-16 A 46 SERIES Features Plug-in power relays: 8 A, 2 pole 16 A, 1 pole Complies with EN 45545-2:2013 (protection against fire of materials), EN 61373 (resistance
More information60 Series - General purpose relays 6-10 A. Features Plug-in mount 10 A General purpose relay
Series - General purpose relays - 0 A Features Plug-in mount 0 A General purpose relay.. & pole changeover contacts Cadmium Free contacts (preferred version) AC coils & DC coils UL Listed (certain relay/socket
More information38 Series - Relay Interface Modules A
Series - Relay Interface Modules 0.1-2 - 6 A - Relay interface modules for use with PLC systems, mm wide - Sensitive DC coil or AC/DC coil version - Supplied with integral coil - Instant removal of relay
More information38 Series - Relay interface modules A. Features /
Series - Relay interface modules 0.1-2 - 6-8 A Features 1 Pole - 6 A electromechanical relay interface modules, 6.2 mm wide. Ideal interface for PLC and electronic systems Sensitive DC coil or coil versions
More information3.5 mm contact pin pitch 1 Pole 12 A PCB direct or via socket
41 Series - Low profile PCB relays 8-12 - 16 A Features 41.31 41.52 41.61 1 & 2 Pole - Low profile (15.7 mm height) 41.31-1 Pole 12 A (3.5 mm pin pitch) 41.52-2 Pole 8 A (5 mm pin pitch) 41.61-1 Pole 16
More informationRelay interface modules A
4C SЕRIES Relay interface modules 8-10 - 16 A Escalators Road / tunnel lighting Hoists and cranes Carousel warehouses Control panels Panels for electrical distribution FINDER reserves the right to alter
More information58 SERIES. Relay interface modules 7-10 A 58.P3 58.P4
58 58 3 & 4 CO relay interface modules, 31 mm wide with Push-in terminals Ideal interface for PLC and electronic systems 58.P3 58.P4 Type 58.P3 3 CO 10 A Push-in terminals Type 58.P4 4 CO 7 A Push-in terminals
More information62 Series - Power relays 16 A. Features / /
6 Series - Power relays 6 A Features 6. / 6.3 6.-0300 / 6.3-0300 Printed circuit mount 6 A Power relay & 3 Pole changeover contacts or NO ( 3 mm contact gap) AC coils & DC coils Reinforced insulation between
More information38 Series - Relay interface modules A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical Relays
More informationRelays, Timers, Interface Modules, Sockets and Accessories Catalogue. The power in relays and timers since 1954
Relays, imers, Interface Modules, Sockets and Accessories. 003-004 Catalogue he power in relays and timers since 954 he power in relays ISO 900 ISO 400 Our four factories produce over 50,000 relays every
More information38 Series - Relay interface modules A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit 6.2 mm wide EMR - DC, AC or AC/DC
More informationmm wide Low coil power PCB or 93 series sockets. Copper side view. 1 CO (SPDT) 6/10 250/400 1, /0.2/ (12/10) AgNi
34 Series - Slim electromechanical PCB relays 6 A Features 34.51 Ultra-slim 1 Pole - 6 A relay Printed circuit mount - direct or via PCB socket 35 mm rail mount - via screw or screwless sockets 1 Pole
More information3.5 mm contact pin pitch 1 Pole 12 A PCB direct or via socket
8-12 - 16 A Features 41.31 41.52 41.61 1 & 2 Pole - Low profile (15.7 mm height) 41.31-1 Pole 12 A (3.5 mm pin pitch) 41.52-2 Pole 8 A (5 mm pin pitch) 41.61-1 Pole 16 A (5 mm pin pitch) PCB mount - direct
More informationRelays, imers, Interface Modules, Sockets and Accessories. 003-004 Catalogue he power EL: in 0755-83376489 relays and timers since 954 E-MAIL: E-MAIL: he power in relays ISO 900 ISO 400 Our four factories
More informationThe power in relays and timers since Catalogue
The power in relays and timers since 1954 2012 Catalogue PCB relays Industrial relays Relay interface modules Sockets and accessories Timers Monitoring relays Energy meters Surge protection devices Industrial
More information30 A rated contacts Flange mount Faston 250 connections. 30 A rated contacts PCB mount - bifurcated terminals. Copper side view
66 Series - Power relays 30 A Features 66.22 66.82 2 Pole Changeover (DPDT) 30 A Power relay 66.22 PCB connections & mount 66.82 Faston 250 connections - Flange mount Reinforced insulation between coil
More information2 or 4 pole changeover contact Plug-in/Faston 187
56 Miniature power relays 56 Plug-in - Power relay, & 4 pole Flange mount option - (Faston 87, 4.8 x 0.5 mm termination) C coils & DC coils Lockable test button and mechanical flag indicator Cadmium Free
More information3.5 mm contact pin pitch 1 Pole 12 A PCB direct or via socket
41 Low profile PCB relays 8-12 - 16 41 1 & 2 Pole - Low profile (15.7 mm height) 41.31-1 Pole 12 (3.5 mm pin pitch) 41.52-2 Pole 8 (5 mm pin pitch) 41.61-1 Pole 16 (5 mm pin pitch) PCB mount - direct or
More information38 SERIES. Relay interface modules A. EMR Electromechanical Relays. Common features. SSR Solid State Relays. 6.
38 Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit 6.2 mm wide EMR - DC, AC or AC/DC
More informationMasterINTERFACE 39 Series - Relay interface modules
Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy ejection by plastic clip Dual screw head (blade+cross)
More information83 Series - Modular timers 16 A. Features
Features 83 Series - Modular timers 16 A 83.11 Multi-function and mono-function timer range - Multi-function & multi-voltage 83.11 - delay, multi-voltage 22.5 mm wide Six time scales from 0.1s to 20h High
More information62 Series - Power relays 16 A. Features SERIES / / Printed circuit mount 16 A Power relay
62 Series - Power relays 16 62 SERIES Features 62.22 / 62.23 62.22-0300 / 62.23-0300 Printed circuit mount 16 Power relay 2 & 3 Pole changeover contacts or NO ( 3 mm contact gap) C coils & DC coils Reinforced
More informationMasterINTERFACE 39 Series - Relay interface modules
MasterINTERFACE 39 Series - Relay interface modules Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy
More information2 pole (1 NO + 1 NC) 1 NO + 1 NC 2 NO + 2 NC, 3 NO + 1 NC 4 NO + 2 NC Rated current / Max. peak current Rated load AC1
Features 7S.12...5110 7S.14...0220/0310 7S.16..0420 Relay module with forcibly guided contacts 7S.12 with 2 pole (1NO + 1 NC) 7S.14 with 4 pole (2 NO + 2 NC and 3 NO + 1 NC) 7S.16 with 6 pole (4 NO + 2
More information62.22 Copper side view
62 Power relays 16 62 Printed circuit mount 16 Power relay 2 & 3 Pole changeover contacts or NO ( 3 mm contact gap) C coils & DC coils Reinforced insulation between coil and contacts according to EN 60335-1,
More informationMulti-voltage Multi-function. Wiring diagram (without control signal)
80 Modular timers 16 A 80 Multi-function and mono-function timer range 80.01T - Multi-function & multi-voltage 80.11T - On-delay, multi-voltage Complies with EN 45545-2:2013 (protection against fire of
More informationA rated contacts Flange mount/faston 250 (6.3 x 0.8 mm) connection
65 Power relays 20-30 65 20 Power relays 1 NO + 1 NC (SPST-NO + SPST-NC) 65.31 Flange mount Faston 250 connections 65.61 PCB mount C coils & DC coils Cadmium Free option available 65.31 65.61 20 rated
More information83 SERIES. 83 Series - Modular timers A. Features
Features 83 Series - Modular timers 12-16 A 83.01 83.02 83 Multi-function timer range 83.01 - Multi-function & multi-voltage, 1 Pole 83.02 - Multi-function & multi-voltage, 2 Pole (timed + instantaneous
More informationA rated contacts PCB mount - bifurcated terminals. Copper side view
66 Power relays 30 66 2 Pole Changeover (DPDT) 30 Power relay 66.22 PCB connections & mount 66.82 Faston 250 connections - Flange mount Reinforced insulation between coil and contacts according to EN 60335-1;
More informationMulti-function 11 pin Plug-in for use with 90 series sockets
88 88 Multi-voltage and multi-function timer range Front panel or socket mount 8 and 11 pin plug-in versions available Time scales from 0.05 s to 100 h 1 delayed contact +1 instantaneous contact version
More informationModular step relays 16 A
Automation for blinds, grilles and shutters Lighting control in corridors (for hotels, offices and hospitals) Bedroom light control Living room light control SЕRIES FINDER reserves the right to alter characteristics
More informationStep relays 10 A SЕRIES. Lighting control in corridors (for hotels, offices and hospitals) Bedroom light control. Living room light control
Lighting control in corridors (for hotels, offices and hospitals) Bedroom light control Living room light control SЕRIES FINDER reserves the right to alter characteristics at any time without notice. FINDER
More informationMulti-function 11 pin Plug-in for use with 90 series sockets
88 eries - lug-in timers 5-8 A Features 88.02 88.12 Multi-voltage and multi-function timer range Front panel or socket mount 8-11 pin plug-in version available ime scales from 0.05s to 100h 1 delayed contact
More informationMulti-voltage Multi-function. BE: Off-delay with control signal BE: Off-delay with control signal CE: On- and off-delay with control signal
83 Modular timers 12-16 A 83 Multi-function timer range 83.01 - Multi-function & multi-voltage, 1 Pole 83.02 - Multi-function & multi-voltage, 2 Pole (timed + instantaneous options), external time setting
More informationMulti-function (MI, ME, M2, M1) 2 NO (2 SPST-NO) 12 / / 400 3,000 1, / 0.3 / (5 / 5) AgNi
Features Special relay for alternating loads, for applications with pumps, compressors, air conditioning or refrigeration units 2 independent NO output, 12 A 4 functions 2 independent control signals,
More informationModular timers A
Modular timers 1-6 - 8-16 A Building automation Elevators and lifts 80 SЕRIES Automation for blinds, grilles and shutters oists and cranes Panels for electrical distribution Door and gate openers FINDER
More informationRelè di potenza 30 A SЕRIES. Power. generators. Industrial washing machines. Burners, boilers and furnaces. Industrial furnaces and ovens
66 SЕRIES Relè di potenza 30 Power generators Industrial washing machines Burners, boilers and furnaces Industrial furnaces and ovens ir conditioners Hoists and cranes Back-up generators Industrial motors
More information13 Series - Electronic step/monostable & call/reset relays 8-16 A. Features
13 Series - Electronic step/monostable & call/reset relays 8-16 A Features 13.01 13.12 13.01 - Quiet operating electronic step/ monostable relay 1 Pole output contact 13.12 - Call & Reset Relay 2 Pole
More information13 SERIES. Electronic step relays A
13 Electronic step relays 10-16 A 13 13.81 - Electronic step relay - Rail mount - 1 Pole 13.91 - Electronic step relay and timing step relay Switch box mount - 1 Pole Fixed time (10 minutes) timing function
More information13 Series - Electronic step relays A. Features SERIES
Series - Electronic step relays 10-16 A SERIES Features.81.91.81 - Electronic step relay - Rail mount - 1 Pole.91 - Electronic step relay and timing step relay Switch box mount - 1 Pole Fixed time (10
More informationElectronic step, call/reset and monostable relays
Electronic step, call/reset and monostable relays W/C Call and reset switches for bathrooms Bathrooms lighting control Bedroom light control Living room light control Office lighting control SЕRIES FINDER
More information13 Series - Electronic step relays A. Features Residential applications
13 13 Series - Electronic step relays 10-16 A Features 13.81 13.91 13.81 - Electronic step relay - Rail mount - 1 Pole 13.91 - Electronic step relay and timing step relay Switch box mount - 1 Pole Fixed
More information87 Series - Modular timers 5-8 A. Features
87 eries - Modular timers 5-8 A Features 87.01 87.02 Mono-function and multi-function timer range mm wide 87.01-1 Pole - Multi-function and multi-voltage 87.02-2 Pole - Multi-function and multi-voltage,
More informationSMARTimer, digital timer 16 A
SMARTimer, digital timer 16 A Timers and lighting controls Automatic car-washes 84 SЕRIES Labelling machines Punches, cleaners, planers and sanders Industrial furnaces and ovens Discotheques, swimming
More informationSong Chuan / Relay Catalog 507
07 eatures High rating miniature PCB Relay. AC & DC coil are both available. UL/CUL and VDE approved. 7A 277VAC SPDT. 2A 277VAC DPDT. Low profile.7 and high insulation system class High CTI material &
More informationSensitivity range ( ) kω adjustable Delay time (0.5s or 7s) switch selectable Emptying or filling functions switch selectable
Features 72.01 72.11 Level control relays for conductive liquids 72.01 - Adjustable sensitivity 72.11 - Fixed sensitivity Emptying or filling functions LED indicator Reinforced insulation (6 kv - 1.2/50
More informationPower PCB Relay. To Order: Select the part number and add the desired coil voltage rating (e.g., G6B-1114-US-DC6).
Power PCB Relay Subminiature 20 L x 9.90 W x 9.90 H mm (0.79 L x 0.39 W x 0.39 H in) Low power consumption (200 mw) Sealed construction permits automatic soldering and cleaning of the PC board High-capacity
More informationFixed - Over/Under voltage limits, ( ) U N respectivity Link selectable - 5 min or 10 min delay. Fixed limits
Features 71.11.8.230.0010 71.11.8.230.1010 1 - Phase 230 V Over & Under voltage monitoring relays 71.11.8.230.0010 - Fixed Over & Under voltage detection - Link selectable 5 or 10 minute lock-out delay
More informationTime switches 16 A NEON SЕRIES. Heating and cooling. Shop displays. Lighting for parks. Streetlights and car park lighting.
Heating and cooling NEON Shop displays Lighting for parks SЕRES Streetlights and car park lighting School bells FNDER reserves the right to alter characteristics at any time without notice. FNDER assumes
More informationCARREL-ELECTRADE LTD not just products... solutions!
FINDER S RANGE OF DIN MOUNTED TIMERS 80 & 83 SERIES MULTI-VOLTAGE & MULTI-FUNCTION CARREL-ELECTRADE LTD not just products... solutions! Proudly 100% New Zealand owned and operated Auckland 661 Great South
More informationFixed - Over/Under voltage limits, ( ) U N respectivity Link selectable - 5 min or 10 min delay. Fixed limits
Features 71.11.8.230.0010 71.11.8.230.1010 1 - Phase 230 V Over & Under voltage monitoring relays 71.11.8.230.0010 - Fixed Over & Under voltage detection - Link selectable 5 or 10 minute lock-out delay
More information46 SERIES. Fast, Reliable and Secure Connections. Miniature industrial relays. The power in relays and timers since 1954
SERIES Fast, Reliable and Secure Connections Miniature industrial relays The power in relays and timers since 9 Series - Miniature industrial relays, - A Features & Pole relay range. - Pole A. - Pole A
More informationSensitivity range ( ) kω adjustable Delay time (0.5s or 7s) switch selectable Emptying or filling functions switch selectable
72 Series - Monitoring relays 16 A Features 72.01 72.11 Level control relays for conductive liquids 72.01 - Adjustable sensitivity 72.11 - Fixed sensitivity Emptying or filling functions LED indicator
More informationOrdering Information. PCB Relay G6RL. Model Number Legend: Low-profile power relay with maximum switching of 10 A
PCB Relay G6RL Low-profile power relay with maximum switching of 10 A Low profile: 12.3 mm in height Max. switching capacity: 2,500 VA (NO) IEC 60947-5-1, AC-15, DC13 Clearance and creepage distance: 10
More informationClassification Enclosure rating Contact form Contact material
PCB Relay Low-profile power relay with maximum switching of 10 A Low profile: 12.3 mm in height Max. switching capacity: 2,500 VA (NO) Dielectric strength: 5 kv Clearance and creepage distance: 10 mm.
More informationMK-S (New Models) General-purpose Relays. New Super MK Relays. Models with Latching Lever Added to the Series. Features. Model Number Structure
General-purpose Relays MK-S (New Models) CSM_MK-S_DS_E 1 New Super MK Relays. Latching Lever Added to the Series. Same mounting and internal wiring as the previous Super MK Relays Built-in mechanical indicator
More informationSensitivity range ( ) kω adjustable Delay time (0.5s or 7s) switch selectable Emptying or filling functions switch selectable
Features Level control relays for conductive liquids 72.01 - Adjustable sensitivity 72.11 - Fixed sensitivity Emptying or filling functions LED indicator Reinforced insulation (6 kv - 1.2/50 µs) between:
More informationG2RL-1A G2RL-1 G2RL-2A G2RL-2
9 PCB Relay High Capacity, Low Profile Relay Low profile:.7 mm max. in height Cadmium-free contacts ensuring environment-friendly use 0 kv impulse surge withstand Clearance and creepage distance: 0 mm/0
More informationFeatures. UL Insulation. Sealed type washable 1A (SPNO) H H-1A-C 845H-1A-V 845H-1A-S. system approval Flux tight Sealed type
84 Features Low cost and low profile miniature PCB Relays. UL/CUL, TUV approved. High rating 12A SPDT, DPDT. mm & mm pinning are both available. Optional for class F. Standard coil 0mW and high sensitivity
More informationPCB Relay. Ordering Information. SPST-NO Type Breaks 10-A Loads; SPST-NO + SPST-NC Type Breaks 8-A Load
PCB Relay SPST-NO Type Breaks 10-A Loads; SPST-NO + SPST-NC Type Breaks -A Load Compact: 20 x 15 x 10 mm (L x W x H). Low power consumption: 200 mw. Flux protection or plastic-sealed construction available.
More informationSubminiature Automotive Relays Type CV20 Monostable
Subminiature Automotive Relays Type CV20 Subminiature relay Switching capacity 20 A DC coils 6 to 24 VDC 1 change over contact/1 double make contact High resistance to vibration and shock Low power consumption
More informationTwo-way Action Test Button (Models with Lockable Test Button) For Momentary Operation
General Purpose Relays MKS Exceptionally Reliable General Purpose Relay now available with Lockable Test Button IEC Rating of A 0 V AC 0/0 Hz, General use 100,000 cycles. Mechanical indicator standard
More information77 Series - Modular Solid State Relay 5 A. Features. Timers and Monitoring relays
Series - Modular Solid State Relay 5 A 77 Features 77.01.x.xxx.8050 77.01.x.xxx.8051 5 A modular SSR, 1 NO output 17.5 mm housing 60 to 240 V AC output (with back to back SCR) 5 kv (1.2/50 μs) insulation
More informationET M3792_a. DC 6, 12, 15, 20, 24 V AC 12, 24, 42, 230 V Voltage range U N
Control Technique Connecting Module Interface Relay Pluggable HC 09 078 According to DIN EN 18 output contacts with monostable PCB-relay OA 8 Version with bistable PCB-relay OB 9 Contact material with
More informationMechanical daily time switch. 35 mm rail (EN 60715) mount
SERES SERES Mechanical time switches - Daily time setting* - Weekly time setting**.01.11.31 Type.01 --Daily --1 CO 16 A --35.8 mm wide --35 mm rail mount Type.11 --Daily --1 O 16 A --17.5 mm wide --35
More informationRelays & Sockets RU Series Universal Relays. With Latching or Momentary Lever. Standard (without lever) Key features:
RU Series Universal Relays Key features: Full featured universal miniature relays Designed with environment taken into consideration Two terminal styles: plug-in and PCB mount Non-polarized LED indicator
More informationCOMPACT PC BOARD POWER RELAY FEATURES. Characteristics. Initial breakdown voltage* 1. Vibration resistance
VDE PACT PC BOARD POWER RELAY JW RELAYS..... FEATURES Miniature package with universal terminal footprint High dielectric withstanding for transient protection:, V surge in µs between coil and contact
More informationClassification Enclosure rating Contact form Model Standard Flux protection SPST-NO G6RL-1A
PCB Relay Low-profile power relay with maximum switching of 8 A Low profile: 12.3 mm in height Max. switching capacity: 2,500 VA (NO) Dielectric strength: 5 kv Clearance and creepage distance: 10 mm. RoHS
More informationSPST-NO SPDT DPST-NO DPDT
PCB Relay A Power Relay with Various Models High-sensitivity ( mw) and High-capacity ( A) Models available. Low profile:.7 mm max. in height Conforms to VDE (EN0-), UL and CSA.. Meets EN0- requirements
More information05/09/2014
48 x 48 Digital LCD Timer 814 Part number 88857005 Relay output digital timers LCD or LED (815E) Multi-range Multi-voltage 1 or 2 relay outputs Reset function on panel (Timers 815, 815E) Data saved in
More information888-1AC-F-C 888-1AC-F-V 888-1AC-F-S (SPNO) 888-2AC-F-C 888-2AC-F-V 888-2AC-F-S (DPNO) 888N-2AC-F-C 888N-2AC-F-V 888N-2AC-F-S (DPNO)
Type List Standard Type eatures High rating miniature PCB Relay. AC & DC coil are both available. UL/CUL and VDE approved. 7A 277VAC SPDT. Low profile.7mm and high insulation system Class. High CTI material
More information12 Series - Time switches 16 A. Features
12 12 Series - Time switches 16 A Features Mechanical time switches - Daily time setting * - Weekly time setting ** Type 12.01-1 Pole 16 A CO (SPDT) 35.8 mm width Type 12.11-1 Pole 16 A NO (SPST-NO) 17.6
More informationThermistor motor protection relays
Thermistor motor protection relays Content Benefits and advantages... / 68 Selection table... / 68 Ordering details CM-MSE... / 69 CM-MSS... / 69 CM-MSN... / 7 PTC sensor C0... / 7 Technical data... /
More informationElectronic timer CT-YDE Star-delta change-over with 1 c/o (SPDT) contact
Data sheet Electronic timer CT-YDE Star-delta change-over with c/o (SPDT) contact The CT-YDE is an electronic time relay with star-delta change-over. It is from the CT-E range. The CT-E range is the economic
More informationV DC 4 POLE RELAY RC V DC 4 POLE RELAY (RC) V AC 4 POLE RELAY
DT SHEET Plug-in power relays Order code Manufacturer code Description -.. V DC POLE RELY RC -.. V DC POLE RELY (RC) -.. V C POLE RELY Plug-in power relays The enclosed information is believed to be correct,
More informationCOMPACT PC BOARD POWER RELAY
VDE PACT PC BOARD POWER RELAY JW RELAYS.... Compliance with RoHS Directive FEATURES Miniature package with universal terminal footprint High dielectric withstanding for transient protection:, V surge in
More informationElectronic timer CT-ERS ON-delayed with 2 c/o contacts Data sheet
1SVR 430 103 F0200 CT-ERS 1 7 2 6 5 4 8 3 1 10 selectable time ranges, from 0.05 s to 300 h 2 Potentiometer with direct reading scale for the fine adjustment of the time delay 3 Sliding switch to set the
More information1a/1c/2a/2c/5A/10A power relays for power supply
a/c/2a/2c/a/a power relays for power supply JW RELAYS RoHS compliant Protective construction: Flux-resistant type/ ORDERING INFORMATION JW Contact arrangement : Form C a: Form A 2: 2 Form C 2a: 2 Form
More informationConductive Sensors 2 to 4-point level controller Type CL with potentiometer
Conductive Sensors to 4-point level controller Type CL with potentiometer Conductive level controller Adjustment of sensitivity operating resistance from 50Ω to 500KΩ Multiple combinations of filling and
More information507-1A H - - C. Features. Type List. Ordering Information
Type List Standard type Teral style Contact form High rating iature PCB Relay. AC & DC coil are both available. UL/CUL and VDE approved. 7A 77VAC SPDT. Low profile mm and high insulation system class.
More informationSPST-NO SPDT DPST-NO DPDT
PCB Relay Next-generation PCB Relay Available in 2 Models Low profile:. mm max. in height Contains no lead inside and features cadmium-free contacts ensuring environment-friendly use. Conforms to VDE0
More informationElectronic timer CT-EBE Flasher starting with OFF, 1 c/o (SPDT) contact
Data sheet Electronic timer CT-EBE Flasher starting with OFF, 1 c/o (SPDT) contact The CT-EBE is an electronic time relay with the function flasher starting with OFF. It is from the CT-E range. The CT-E
More informationCONTA-ELECTRONICS. Relay systems
CONTA-ELECTRONICS Relay technology continues to play a large role in the reliability of industrial control and automation solutions. Because of their thin design, relay couplers are suitable for use in
More informationElectronic timer CT-AWS Impulse-OFF with 1 c/o contact Data sheet
2CDC 251 121 F0004 1 5 2 4 3 6 Characteristics Single-function impulse-off timer One device includes 10 time ranges, from 0.05 s to 300 h, for the adjustment of the pulse time Remote potentiometer connection
More information1a/1c/2a/2c/5A/10A power relays for power supply
Automation Controls Catalog VDE a/c/2a/2c/a/a power relays for power supply JW RELAYS RoHS compliant Protective construction: Flux-resistant /Sealed ORDERING INFORMATION Contact arrangement : Form C a:
More informationLow profile safety relay with forcibly guided double contacts FEATURES. Relay height, 14.5mm. 4a2b
Low profile safety relay with forcibly guided double contacts SFN4D RELAY 3.3 33.0 FEATURES Relay complies with EN 020, Type B. Polarized magnet system with snap action function Tolerance ±0.3 mm Weight
More informationSafety Relay H-462. Dimensions LxWxH(in mm) Size 1: 57,8 x20,5 x48,6 Size 2: 67,4 x20,5 x48,6
General 4or 6 contacts Forced guided contact set According to EN 50205, application type A Ambient temperature 25 +80 C Soldering heat resistance 260 C/5s RoHS compliance Signal relay according to UIC
More informationRelays & Sockets. RF1V Force Guided Relays/SF1V Relay Sockets. Certification Organization/ File Number. UL/c-UL File No.
RFV Key features: Compact and EN compliant RFV force guided relays Force guided contact mechanism (EN00 Type A TÜV approved) Contact configuration -pole (NO-NC, 3NO-NC) 6-pole (NO-NC, NO-NC, 3NO-3NC) Built-in
More informationGeneral-purpose Relay
General-purpose Relay Exceptionally Reliable General-purpose Relay Features Mechanical Indicator/Push Button Breaks relatively large load currents despite small size. Long life (minimum 0,000 electrical
More informationPCB Relay. Contact form Terminal Single-side stable Single-winding latching Double-winding latching
PCB Relay Subminiature, Sensitive SPDT Signal Switching Relay High sensitivity: 98-mW pickup coil power. Impulse withstand voltage meets FCC Part 68 requirements. Fully sealed construction. Unique moving
More information46.61 Series, SPDT 16A. Part Number Price Coil Voltage
www.factorymation.com/relays 85 Miniature Ice Cube Relays Mechanical flag indicator shows contact status Momentary / Lockable test button AgNi contacts (Cadmium free) Operating temperature: 40 to 58 F
More informationVoltage monitoring relay CM-EFS.2 For single-phase AC/DC voltages
Data sheet Voltage monitoring relay CM-EFS.2 For single-phase AC/DC voltages The CM-EFS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
More informationTeSys contactors. TeSys D contactors. IEC/EN , IEC/EN , UL 508, CSA C22.2 n 14. Protection against direct fi nger contact IP 2X
Characteristics Contactor type LC1 D09 D18 DT20 and DT25 Environment Rated insulation voltage (Ui) Conforming to IEC 097--1, overvoltage category III, degree of pollution: 3 Conforming to UL, CSA V 00
More informationCOMPACT PC BOARD POWER RELAY
VDE PACT PC BOARD POWER RELAY JW RELAYS..... RoHS Directive compatibility information http://www.nais-e.com/ FEATURES Miniature package with universal terminal footprint High dielectric withstanding for
More informationMiniature Power Relay MSR
V23061 PCB relay for DC voltage, neutral, monostable Features Used as a switching element for electrical separation between low-power control circuits and power load circuits With 8 mm clearance and creepage
More informationLC1D25BL TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 25 A - 24 V DC coil
Product data sheet Characteristics LC1D25BL TeSys D contactor - 3P(3 NO) - AC-3 -
More informationMonitoring Relays True RMS 3-Phase, 3-Phase+N, Multifunction Types DPC71, PPC71
Monitoring Relays True RMS 3-Phase, 3-Phase+N, Multifunction Types DPC71, PPC71 DPC71 PPC71 TRMS 3-phase over and under voltage, phase sequence, phase loss, asymmetry and tolerance monitoring relay Detect
More informationCurrent monitoring relays CM-SRS.1 For single-phase AC/DC currents
Data sheet Current monitoring relays CM-SRS.1 For single-phase AC/DC currents The CM-SRS.1 is an electronic current monitoring relay that protects single-phase mains (DC or AC) from over- and undercurrent
More information