87 Series - Modular timers 5-8 A. Features

Size: px

Start display at page:

Download "87 Series - Modular timers 5-8 A. Features"

Dominic Little
5 years ago
Views:

87 eries - Modular timers 5-8 A Features 87.01 87.02 Mono-function and multi-function timer range mm wide 87.01-1 Pole - Multi-function and multi-voltage 87.

1 87 eries - Modular timers 5-8 A Features Mono-function and multi-function timer range mm wide Pole - Multi-function and multi-voltage Pole - Multi-function and multi-voltage, (timed + instantaneous options) External time setting potentiometer option Wide supply voltage range: (24 240)V AC / (24 48)V DC LED indicator ime setting from 0.05 seconds to 60 hours ing Multi-function 1 pole Multi-function iming can be regulated using ext. Potentiometer 2 timed contacts or 1 timed + 1 instantaneous contact / crew terminal AI: ON delay BE: ignal OFF delay CE: ignal ON and OFF Delay DE: ignal ON pulse DI: ON pulse EE a: ignal OFF pulse GI: Fixed pulse delayed W: ymmetrical recycling: ON start AI: ON delay BE: ignal OFF delay CE: ignal ON and OFF Delay DE: ignal ON pulse DI: ON pulse EE a: ignal OFF pulse GI: Fixed pulse delayed W: ymmetrical recycling: ON start (21) 25 (21) 25 A2 Z1 Z (24 22) A2 Z1 Z (24 22) (without signal AR) (with signal AR) (without signal AR) (with signal AR) Contact specification Contact configuration Rated current/maximum peak current A Rated voltage/maximum switching voltage V AC Rated load AC1 Rated load AC15 (230 V AC) ingle phase motor rating (230 V AC) kw Breaking capacity DC1: 30/110/220 V A Minimum switching load mw (V/mA) tandard contact material upply specification Nominal voltage ( N ) V AC (50/60 Hz) V DC Rated power AC/DC (50 Hz)/W Operating range AC DC echnical data pecified time range Repeatability % Recovery time Minimum control impulse etting accuracy-full range % Electrical life at rated load in AC1 cycles Ambient temperature range (Contact current) C Protection category Approvals (according to type) 1 CO (PD) 2 CO (DPD) 8/30 8/30 250/ /400 2,000 2, /0.5/0.2 8/0.5/ (10/5) 300 (10/5) AgCdO AgCdO /0.5 5/0.5 ( ) N ( ) N ( ) N ( ) N ee page 6 ee page 6 ±2 ± ±5 ± / (< 5 A) IP 20 IP 20 1

2 87 eries - Modular timers 5-8 A Features Mono-function and multi-function timer range mm wide ON delay, multi-voltage ON pulse, multi-voltage ymmetrical recycling, multi-voltage 1 Pole output contact Wide supply voltage range: (24 240)V AC / (24 48)V DC LED indicator ime setting: ypes 87.11/ seconds to 60 hours ype seconds to 10 seconds / /87.31 crew terminal AI: ON delay DI: ON pulse W: ymmetrical recycling: ON start (without signal AR) (without signal AR) (without signal AR) Contact specification Contact configuration Rated current/maximum peak current A Rated voltage/maximum switching voltage V AC Rated load AC1 Rated load AC15 (230 V AC) ingle phase motor rating (230 V AC) kw Breaking capacity DC1: 30/110/220 V A Minimum switching load mw (V/mA) tandard contact material upply specification Nominal voltage ( N ) V AC (50/60 Hz) V DC Rated power AC/DC (50 Hz)/W Operating range AC DC echnical data pecified time range Repeatability % Recovery time Minimum control impulse etting accuracy-full range % Electrical life at rated load in AC1 cycles Ambient temperature range C Protection category Approvals (according to type) 1 CO (PD) 1 CO (PD) 1 CO (PD) 8/30 8/30 8/30 250/ / /400 2,000 2,000 2, /0.5/0.2 8/0.5/0.2 8/0.5/ (10/5) 300 (10/5) 300 (10/5) AgCdO AgCdO AgCdO /0.5 5/0.5 5/0.5 ( ) N ( ) N ( ) N ( ) N ( ) N ( ) N ee page 6 ee page 6 ee page 6 ± 0.2 ± 0.2 ± ±5 ±5 ± IP 20 IP 20 IP 20 2

3 87 eries - Modular timers 5-8 A Features Mono-function and multi-function timer range mm wide ignal OFF delay, multi-voltage, 1 Pole rue OFF delay, multi-voltage, 1 Pole rue OFF delay, multi-voltage, 2 Pole Wide supply voltage range: ype 87.41, (24 240)V AC/(24 48)V DC ypes 87.61/62, (24 240)V AC/DC LED indicator ime setting range: ype seconds to 60 hours ypes 87.61/ seconds to 10 minutes / / crew terminal 1 pole 1 pole 2 pole BE: ignal OFF delay BI: rue OFF delay BI: rue OFF delay (with signal AR) (without signal AR) (without signal AR) Contact specification Contact configuration Rated current/maximum peak current A Rated voltage/maximum switching voltage V AC Rated load AC1 Rated load AC15 (230 V AC) ingle phase motor rating (230 V AC) kw Breaking capacity DC1: 30/110/220 V A Minimum switching load mw (V/mA) tandard contact material upply specification Nominal voltage ( N ) V AC (50/60 Hz) V DC Rated power AC/DC (50 Hz)/W Operating range AC DC echnical data pecified time range Repeatability % Recovery time Minimum control impulse etting accuracy-full range % Electrical life at rated load in AC1 cycles Ambient temperature range C Protection category Approvals (according to type) 1 CO (PD) 1 CO (PD) 2 CO (DPD) 8/30 5/10 5/10 250/ / /400 2,000 1,250 1, /0.5/0.2 5/0.5/0.2 5/0.5/ (10/5) 300 (10/5) 300 (10/5) AgCdO AgCdO AgCdO / / /1.5 ( ) N ( ) N ( ) N ( ) N ( ) N ( ) N ee page 6 ee page 6 ee page 6 ±0.2 ±1 ± (A1 - A2) 300 (A1 - A2) ±5 ±5 ± IP 20 IP 20 IP 20 3

4 87 eries - Modular timers 5-8 A Features Mono-function and multi-function timer range mm wide tar-delta timer, multi-voltage, star and delta output contacts Multi-function Recycling timer, 1 Pole Wide supply range: (24 240)V AC / (24 48)V DC LED indicator ime setting voltage range: ype minute to 1 minute ype seconds to 60 hours : tar - delta 2 pole Multi-function recycling 1 pole / crew terminal D: tar - delta LI: Asymmetrical recycling (ON starting) LE: ignal asymmetrical recycling (ON starting) PI: Asymmetrical recycling (OFF starting) PE: ignal asymmetrical recycling (OFF starting) A1 17 A (without signal AR) (without signal AR) (with signal AR) Contact specification Contact configuration Rated current/maximum peak current A Rated voltage/maximum switching voltage V AC Rated load AC1 Rated load AC15 (230 V AC) ingle phase motor rating (230 V AC) kw Breaking capacity DC1: 30/110/220 V A Minimum switching load mw (V/mA) tandard contact material upply specification Nominal voltage ( N ) V AC (50/60 Hz) V DC Rated power AC/DC (50 Hz)/W Operating range AC DC echnical data pecified time range Repeatability % Recovery time Minimum control impulse etting accuracy-full range % Electrical life at rated load in AC1 cycles Ambient temperature range C Protection category Approvals (according to type) 2 NO (DP-NO) 1 CO (PD) 8/30 8/30 250/ /400 2,000 2, /0.5/0.2 8/0.5/ (10/5) 300 (10/5) AgCdO AgCdO /0.5 5/0.5 ( ) N ( ) N ( ) N ( ) N ee page 6 ee page 6 ± 0.2 ± ±5 ± IP 20 IP 20 4

5 87 eries - Modular timers 5-8 A Ordering information Example: 87 series multi-function timer 8 A, 1 CO (PD) contact, (24 240)V AC (50/60 Hz) and (24 48)V DC supply eries ype 0 = Multi-function (AI, BE, CE, DI, DE, EE a, GI, W, ON, OFF) 1 = ON delay (AI) 2 = ON pulse (DI) 3 = ymmetrical recycling: ON start (W) 4 = ignal OFF delay (BE) 6 = rue OFF delay (power OFF) (BI) 8 = tar - delta (D) 9 = Asymmetrical recycling (LI, LE, PI, PE) upply voltage 240 = { (24 48)V DC (24 240)V AC 240 = (24 240)V AC/DC for and upply version 0 = AC (50/60 Hz)/DC No. of poles 1 = 1 pole 2 = 2 pole for 87.02/62 2 = 2 NO (DP-NO) for echnical data Insulation Dielectric strength between input and output circuit V AC 4,000 insulation (1.2/50 µs) between input and output kv 6 between open contacts V AC 1,000 between adjacent contacts V AC 2,000 (ype 87.02, 87.62) EMC specifications ype of test Reference standard Electrostatic discharge contact discharge EN kv air discharge EN kv Radio-frequency electromagnetic field ( MHz) EN V/m Fast transients (burst) (5-50 ns, 5 khz) on upply terminals EN kv urges (1.2/50 µs) on upply terminals common mode EN kv differential mode EN kv Radio-frequency common mode ( MHz) on upply terminals EN V Radiated and conducted emission EN classe B Other data ignal control (B1) current absorption 1 ma max cable length (capacity of 10 nf / 100 m) 250 m when applying a control signal to B1, which is B1 is isolated from A1 and A2 by an opto-coupler, and can therefore different from the supply voltage at A1/A2 be operated at a voltage other than the supply voltage If using a control signal of between ( ) V DC and a supply voltage When applying a control signal to B1 it is recommended to attach of ( ) V AC; ensure that the signal is connected to A2 and the a bypass resistance 56 kohm/2 W across A1 - A2 + is applied to B1, and that L is applied to A1 and N to A2 External potentiometer for se a 10 kω/ 0,25 W linear potentiometer. Maximum cable length 10 m. When using an external potentiometer, remove the bridge between Z1 and Z2, and set the timer spotentiometer to its minimum setting. Consider the voltage potential at the potentiometer to be the same as the timer supply voltage. Power lost to the environment 87.01/02/11/21/31/41/ / without contact current W with rated current W crew torque Nm 1.2 Max. wire size solid cable stranded cable mm 2 1x4 / 2x2.5 1x4 / 2x1.5 AWG 1x12 / 2x14 1x12 / 2x16 5

6 87 eries - Modular timers 5-8 A ime scales ype Function Code Function 87.01/ AI ON delay BE ignal OFF delay CE ignal ON and OFF delay DI ON pulse DE ignal ON pulse EE a ignal OFF pulse GI Fixed pulse (0,5s) delayed W ymmetrical recycling: ON start AI ON delay DI ON pulse W ymmetrical recycling: ON start BE ignal OFF delay 87.61/ BI rue OFF delay (power OFF) D tar - delta ( = ~60 ) ime ranges - minimum to maximum span s s s min min min h h h h 0,05 0,15 0,5 0,05 0,15 0,5 0,05 0,15 0, LI Asymmetrical recycling (ON start) LE ignal asymmetrical recycling (ON start) PI Asymmetrical recycling (OFF start) PE ignal asymmetrical recycling (OFF start) Potentiometer for remote time setting of timer kω/0.25 W linear. Panel hole diameter - mm

7 87 eries - Modular timers 5-8 A Functions = upply Voltage LED Green iming NO output contact Contacts imed Open Closed DIP switch Contacts Instantaneous Open Closed = ignal switch None Open p C = Output Contact In progress In progress Open Closed None Closed Down only for type with 2 timed contacts only for type with 1 instantaneous contact + 1 timed positioning the front DIP switch. he LED on types and is illuminated when supply voltage is supplied to timer. Multi-function without signal AR ype t< (AI) ON delay. Apply power to timer. Output contacts transfer after preset time has elapsed. Reset occurs when power is removed. t< (DI) ON pulse. Apply power to timer. Output contacts transfer immediately. After the preset time has elapsed, contacts reset. (21) s (GI) Fixed pulse (0.5s) delayed. Apply power to timer. Output contacts transfer after preset time has elapsed. Reset occurs after a fixed time of 0.5s. A2 Z1 Z (24 22) t< (W) ymmetrical recycling: ON start. Apply power to timer. Output contacts transfer immediately and cycle between ON and OFF for as long as power is applied. he ratio is 1:1 (time on = time off). with signal AR t< (BE) ignal OFF delay. he output contacts transfer immediately on closure of the ignal witch (). Opening the ignal witch initiates the preset delay, after which time the output contacts reset (CE) ignal ON and OFF delay. Closing the ignal witch () initiates the preset delay, after which time the output contacts transfer. Opening the ignal switch initiates the same preset delay, after which time the output contacts reset. A2 Z1 Z (24 (21) 25 22) A voltage other than the supply voltage can be applied to the command AR (B1). Example: A1 - A2 = 230 V AC B1 - A2 = 24 V AC ype 87.02: regulated using an external potentiometer (10 kω W). NB.: remove link between Z1-Z2 and position the imer potentiometer on zero. ON C OFF C t< t< t< (DE) ignal ON pulse. On momentary or maintained closure of ignal witch (), the output contacts transfer, and remain so for the duration of the preset delay, after which they reset. (EE a) ignal OFF pulse. On opening of the ignal witch () the output contacts transfer, and remain so for the duration of the preset delay, after which they reset. Permanently ON. electing the function ON when power is applied to the relay the first contact transfers immediately and remains in that position. Permanently OFF. he contact returns to the original position when the OFF function is selected. 7

8 87 eries - Modular timers 5-8 A Functions Mono-function without signal AR ype t< (AI) ON delay. Apply power to timer. Output contacts transfer after preset time has elapsed. Reset occurs when power is removed t< t< (DI) ON pulse. Apply power to timer. Output contacts transfer immediately. After the preset time has elapsed, contacts reset. (W) ymmetrical recycling: ON start. Apply power to timer. Output contacts transfer immediately and cycle between ON and OFF for as long as power is applied. he ratio is 1:1 (time on = time off) (BI) rue OFF delay (power OFF). Apply power to timer (minimum 300 ). Output contacts transfer immediately. Removal of power initiates the preset delay, after which time the output contacts reset. A1 17 A u= 60 (D) tar - delta. Apply power to timer. he star contact ( ) closes immediately. After preset delay has elapsed the star contact ( ) resets. After a further fixed time of ~60 the delta contact ( ) closes and remains in that position, until reset on power off. with signal AR () t< (BE) ignal OFF delay. he output contacts transfer immediately on closure of the ignal witch (). Opening the ignal witch initiates the preset delay, after which time the output contacts reset Asymmetrical recycler without signal AR switch position t<1 (LI) Asymmetrical recycling (ON start). Apply power to timer. Output contacts transfer immediately and cycle between ON and OFF for as long as power is applied. he ON and OFF times are independently adjustable switch position t< (PI) Asymmetrical recycling (OFF start). Apply power to timer. Output contacts transfer after time 1 has elapsed and cycle between OFF and ON for as long as power is applied. he ON and OFF times are independently adjustable. with signal AR () switch position t< (LE) ignal asymmetrical recycling (ON start) Closing ignal witch () causes the output contacts to transfer immediately and cycle between ON and OFF, until opened switch position t< (PE) ignal asymmetrical recycling (OFF start). Closing the ignal witch () initiates delay 1 after which the output contacts transfer and continue to cycle between OFF and ON, until the ignal witch is opened. 8

83 SERIES. 83 Series - Modular timers A. Features

83 SERIES. 83 Series - Modular timers A. Features Features 83 Series - Modular timers 12-16 A 83.01 83.02 83 Multi-function timer range 83.01 - Multi-function & multi-voltage, 1 Pole 83.02 - Multi-function & multi-voltage, 2 Pole (timed + instantaneous