LINEAR IRRADIATION TYPE UV-LED UNIT. Concentration of optical technology
|
|
- Domenic Ramsey
- 6 years ago
- Views:
Transcription
1 LINEAR IRRADIATION TYPE U-LED UNIT Concentration of optical tecnology
2 LINEAR IRRADIATION TYPE U-LED UNIT Offering U-LED ligt sources wit a cluster of potonics tecnology Te LC-L5G U-LED ligt sources ave many kinds of applications including U curing and ink drying. Along wit ig output, all LC-L5G U-LED units employ an "air cooling sceme" developed by our own tecnology. Besides offering te igest power output in its class uatcable by metal-alide lamps and oter U-LED ligt sources, tis air cooling sceme eliminates aving to install ciller equipment, minimizing te initial introduction costs and te space (footprint) required for installation. Hamamatsu provides a diverse LC-L5G product lineup to matc your application and offers an LC-L5G tat will be ideal for your needs. 2
3 Product Lineup Irradiation area: spage avelengt U irradiance 9 /cm 2 12 /cm 2 Irradiation area: spage avelengt U irradiance 9 /cm 2 12 /cm 2 Irradiation area: spage avelengt U irradiance 5 /cm 2 5 /cm 2 Irradiation area: spage avelengt U irradiance 9 /cm 2 12 /cm 2 Irradiation area: spage avelengt U irradiance 9 /cm 2 12 /cm 2 Irradiation area: 75 5 spage avelengt U irradiance 2.5 /cm /cm /cm /cm 2 Irradiation area: 77 5 spage avelengt U irradiance 2.5 /cm /cm /cm /cm 2 Irradiation area: 77 5 spage avelengt U irradiance 2.5 /cm /cm /cm /cm 2 Irradiation area: spage avelengt U irradiance 7.5 /cm 2 10 /cm 2 10 /cm 2 * U irradiance is te value at distance of 0. 3
4 series U irradiance (Max.): 12 /cm 2 Te GJ series meets your needs for ig output, air cooling, compact and ligtweigt wit ig-level solutions. Hamamatsu as succeeded in linking all te tecnology it fostered up to now in its unique cooling mecanisms and optical systems to converge te mutually exclusive major elements of ig output, air cooling, compact and ligtweigt into one unit. By acieving ig-level specs from tese elements, te GJ series elps improve productivity in manufacturing process and reduce total costs and installation space. Product lineup offers an irradiation area of 75 () 15 (D) and wavelengts of and. Use coercially available general-purpose power supplies or a power supply available from Hamamatsu. 4 U irradiance 2 avelengt Applicable Dimensions ( H D) eigt Recoended power supply 4 (at distance of 0 ) (at distance of 2 ) Safety Enviroental Output voltage (DC) Output power (Min.) L L NOTE: 1Area irradiated at a distance of 2 2Maximum U irradiance witin te irradiation area 3Average time until te irradiance drops to 70 % of te initial level wen operated at 25 4en using coercially available power supplies, make sure tat tey ave te recoended specifications ± to + 10 % to 80 % (no condensation) Irradiation control, ligt intensity adjustment, Irradiation signal, various error signals EEE directive Approx /cm 2 kg
5 series U irradiance (Max.): 12 /cm 2 Besides ig output and efficient air cooling, te GL series also offers a wide range of product variations. U-LED ligt sources ave great features suc as a compact and ligtweigt body, low power consumption (cuts te electric power bill), long life, and instantaneous ligting and ON/OFF operation. Te GL-120 includes all of tese features and extracts te utmost in U-LED ligt source performance via ig tecnology to deliver ig output and efficient air cooling. Product lineup offers an irradiation area of 120 () 15 (D) and wavelengts of and. Use coercially available general-purpose power supplies or a power supply available from Hamamatsu. U irradiance 2 avelengt Applicable Dimensions( H D) eigt Recoended power supply 4 (at distance of 0 ) (at distance of 2 ) Safety Enviroental Output voltage (DC) Output power (Min.) L L NOTE: 1Area irradiated at a distance of 2 2Maximum U irradiance witin te irradiation area 3Average time until te irradiance drops to 70 % of te initial level wen operated at 25 4en using coercially available power supplies, make sure tat tey ave te recoended specifications ± to + 10 % to 80 % (no condensation) Irradiation control, ligt intensity adjustment, irradiation signal, various error signals EEE directive Approx /cm 2 kg 5
6 series U irradiance (Max.): 5 /cm 2 Besides ig output and efficient air cooling, te GL series also offers a wide range of product variations. Te GL-150C supports operation of multiple linked units to expand te irradiation area in te widt direction. Tis allows a ig degree of freedom in designing a ligt source system tat matces te production process conditions. Te GL-150C as already been used by many customers in a wide range of application fields. Product lineup offers an irradiation area of 150 () 50 (D) and wavelengts of and 395. Use coercially available general-purpose power supplies or a power supply available from Hamamatsu. 6 (at distance of 0 ) U irradiance 2 (at distance of 2 ) avelengt Applicable Dimensions ( H D) eigt Recoended power supply 4 NOTE: Safety Enviroental Output voltage (DC) Output power (Min.) L L ± to + 10 % to 80 % (no condensation) Irradiation control, ligt intensity adjustment, irradiation signal, various error signals EEE directive Approx. 1.9 Possible 1Area irradiated at a distance of 2 2Maximum U irradiance witin te irradiation area 3Average time until te irradiance drops to 70 % of te initial level wen operated at 25 4en using coercially available power supplies, make sure tat tey ave te recoended specifications. 900 /cm 2 kg
7 series U irradiance (Max.): 12 /cm 2 Besides ig output and efficient air cooling, te GL series also offers a wide range of product variations. Switcing away from metal-alide lamps to U-LED ligt sources provides various kinds of benefits suc as iger equipment performance and efficiency and also cuts te overall cost. Tese canges ave almost zero effect on device caracteristics regardless of application, so we recoend making a switcover to te GL-250 U-LED. Product lineup offers an irradiation area of 250 () 15 (D) and wavelengts of and. Use coercially available general-purpose power supplies or a power supply available from Hamamatsu. U irradiance 2 avelengt Applicable Dimensions ( H D) eigt Recoended power supply 4 NOTE: (at distance of 0 ) (at distance of 2 ) Safety Enviroental Output voltage (DC) Output power (Min.) L L ± to + 10 % to 80 % (no condensation) Irradiation control, ligt intensity adjustment, irradiation signal, various error signals EEE directive Approx Area irradiated at a distance of 2 2Maximum U irradiance witin te irradiation area 3Average time until te irradiance drops to 70 % of te initial level wen operated at 25 4en using coercially available power supplies, make sure tat tey ave te recoended specifications. /cm 2 kg 7
8 series U irradiance (Max.): 12 /cm 2 Besides ig output and efficient air cooling, te GL series also offers a wide range of product variations. Among te LC-L5G U-LED units, te GL-430 is number one in terms of irradiation area. In addition to te large irradiation area, our unique optical systems ensure uniform irradiation tat eliminates nearly all variations in ligt intensity. Te GL-430 will vastly improve quality control in a wide range of applications. Product lineup offers an irradiation area of 430 () 15 (D) and wavelengts of and. Use coercially available general-purpose power supplies or a power supply available from Hamamatsu. 8 U irradiance 2 avelengt Applicable Dimensions ( H D) eigt Recoended power supply 4 NOTE: (at distance of 0 ) (at distance of 2 ) Safety Enviroental Output voltage (DC) Output power (Min.) L L ± to + 10 % to 80 % (no condensation) Irradiation control, ligt intensity adjustment, irradiation signal, various error signals EEE directive Approx Area irradiated at a distance of 2 2Maximum U irradiance witin te irradiation area 3Average time until te irradiance drops to 70 % of te initial level wen operated at 25 4en using coercially available power supplies, make sure tat tey ave te recoended specifications. /cm 2 kg
9 series U irradiance (Max.): 2.5 /cm 2 Te GP / GC series as a lean, stylis design aimed at providing versatility via a compact body and tin profile. Te GP-75 as a cooling fan mounted on te side face and so can be installed even in confined spaces. Te GP-75 is also designed for less power consumption to allow energy-savings at production sites. Product lineup offers an irradiation area of 75 () 5 (D) and wavelengts of,, 395 and 5. Use coercially available general-purpose power supplies or a power supply available from Hamamatsu. (at distance of 0 ) U irradiance 2 (at distance of 2 ) avelengt Applicable Dimensions ( H D) eigt Recoended power supply 4 NOTE: L L L L ± to + 20 % to 80 % (no condensation) Irradiation control, ligt intensity adjustment, various error signals Safety Enviroental EEE directive Approx. 250 Possible Output voltage (DC) Output power (Min.) 45 1Area irradiated at a distance of 2 2Maximum U irradiance witin te irradiation area 3Average time until te irradiance drops to 70 % of te initial level wen operated at 25 4en using coercially available power supplies, make sure tat tey ave te recoended specifications. /cm 2 g 9
10 series Connected operation U irradiance (Max.): 2.5 /cm 2 Te GP / GC series as a lean, stylis design aimed at providing versatility via a compact body and tin profile. Te GC-77 supports operation of multiple linked units to make it so easy to adapt different production processes. Higly accurate positioning of te lens in te ligt-emitting window ensures uniform irradiation free of any sading even at te junctions between eac unit during operation of multiple linked units. Product lineup offers an irradiation area of 77 () 5 (D) and wavelengts of,, 395 and 5. Use coercially available general-purpose power supplies or a power supply available from Hamamatsu. 10 L L L L (at distance of 0 ) 2.5 U irradiance 2 (at distance of 2 ) 2 avelengt ± to + 20 % to 80 % (no condensation) Irradiation control, ligt intensity adjustment, various error signals Applicable Safety Enviroental Dimensions ( H D) eigt Recoended Output voltage (DC) EEE directive Approx. 250 Possible Possible power supply 4 Output power (Min.) 45 NOTE: 1Area irradiated at a distance of 2 2Maximum U irradiance witin te irradiation area 3Average time until te irradiance drops to 70 % of te initial level wen operated at 25 4en using coercially available power supplies, make sure tat tey ave te recoended specifications. /cm 2 g
11 Series Cooling fan surface side Irradiation surface side Connected operation U irradiance (Max.): 2.5 /cm 2 Te GP / GC series as a lean, stylis design aimed at providing versatility via a compact body and tin profile. Te GC-77S is capable of irradiating ligt perpendicular to its installation surface. Tis means tere is no need to provide vertical (eigt-wise) installation space, so te GC-77S can now be installed in locations were it was previously toug to mount. Te GC-77S also supports operation of multiple linked units to make it so easy to adapt different production processes. Product lineup offers an irradiation area of 77 () 5 (D) and wavelengts of,, 395 and 5. Use coercially available general-purpose power supplies or a power supply available from Hamamatsu. L L L L (at distance of 0 ) 2.5 U irradiance 2 (at distance of 2 ) 2 avelengt ± to + 20 % to 80 % (no condensation) Irradiation control, ligt intensity adjustment, various error signals Applicable Safety Enviroental Dimensions ( H D) eigt Recoended Output voltage (DC) EEE directive Approx. 285 Possible Possible power supply 4 Output power (Min.) 45 NOTE: 1Area irradiated at a distance of 2 2Maximum U irradiance witin te irradiation area 3Average time until te irradiance drops to 70 % of te initial level wen operated at 25 4en using coercially available power supplies, make sure tat tey ave te recoended specifications. /cm 2 g 11
12 Series Connected operation U irradiance (Max.): 10 /cm 2 Te GP / GC series as a lean, stylis design aimed at providing versatility via a compact body and tin profile. Te GC-113 supports operation of multiple linked units to make it so easy to adapt different production processes. Te GC-113 elps suppress equipment investment cost to a minimum since tere is no longer any need to switc over or replace production equipment wen canging te production lines. Product lineup offers an irradiation area of 113 () 8 (D) and wavelengts of, and 395. Use coercially available general-purpose power supplies or a power supply available from Hamamatsu. 12 (at distance of 0 ) U irradiance 2 (at distance of 2 ) avelengt Applicable NOTE: Safety Enviroental Dimensions ( H D) eigt Recoended Output voltage (DC) power supply 4 Output power (Min.) L L ± to + 20 % to 80 % (no condensation) L Irradiation control, ligt intensity adjustment, various error signals EEE directive Approx. 500 Possible Possible 260 1Area irradiated at a distance of 2 2Maximum U irradiance witin te irradiation area 3Average time until te irradiance drops to 70 % of te initial level wen operated at 25 4en using coercially available power supplies, make sure tat tey ave te recoended specifications. /cm 2 g
13 Q&A Question at else do I need besides te LC-L5G? Do I need cooling exaust ducts? Does te LC-L5G generate ozone? Can te LC-L5G be used in a nitrogen (N2) enviroent? Can oter equipment be linked wit te LC-L5G operation? Can te LED still be used wen its design service life time (20,000 ours) is exceeded? at temperature does te LC-L5G unit body reac during operation? Are tere any termal effects on te irradiated objects? Can te U-LED ligt intensity be compared wit tat from metal alide lamps? Does switcing over from metal alide lamps to U-LED affect te work enviroent? How muc does switcing over from metal alide lamps to U-LED lower te electric power bill? Can te LC-L5G unit be customized? Is tere a dedicated mounting stand? at kind of maintenance service can I expect? How do I replace te ligt-emitting window? How sould I monitor te ligt intensity? Are tere any precautions I sould take during use? Are tere any compulsory legal duties I ave to fulfill? Answer You need a power supply and cables. Use coercially available general-purpose power supplies and cables or a controller power supply available from Hamamatsu and our optional cables. Te cooling fan witin te LC-L5G unit is basically capable of adequate cooling, so cooling exaust ducts are not needed. However, if you are concerned about effects of te cooling fan on te object being irradiated, ten exaust ducts will ave to be installed. Please consult us if you will be installing tem. No, it does not generate ozone. Yes, it can be used in a nitrogen (N2) enviroent. However, it cannot be used under a depressurized condition. Hamamatsu as various lamp ligt sources available, so please consult if necessary. Yes, te LC-L5G is designed for remote control operation and so can be linked to oter equipment. e recoend replacing te LED witin its design service life time (20,000 ours). Altoug it is still usable even if te LED design service life time (20,000 ours) is exceeded, te LED and oter components may deteriorate suddenly. During operation at an ambient temperature of 25, te unit body temperature reaces approximately to 50 (localized points may reac approximately 60 ). U-LED emits a single wavelengt of ligt in te U range and as only minimal termal effects on te irradiated object compared to metal alide lamps wic emit ligt over a broad wavelengt range from U to infrared. However, tis does not mean tat te termal effects are zero. Metal alide lamps emit ligt over a broad wavelengt range wile U-LED emits a single wavelengt of ligt, so comparing teir ligt intensities is not a simple task. However, if te specifications for a particular metal alide lamp are known, ten a roug comparison can be made. Please consult us for assistance. Besides minimal termal effects on te irradiated object, te amount of eat emitted from te U-LED is low compared to metal alide lamps, so te temperature in te work enviroent is vastly improved. If you could give us te information suc as power consumption figure, ten we could calculate your electric power bill. Please consult us for assistance. Please consult wit us about customizing te unit. Please consult us for information on a custom mounting stand. Te ligt-emitting window and te cooling fan filter can be replaced on-site. If oter servicing or repairs are needed, ten please return te LC-L5G unit to us for servicing. Our service personnel can replace it at your workplace or you can sip te LC-L5G unit back to us for replacement. e recoend using U power meters available as options from us. You can also utilize your own U power meter if properly calibrated. Te LC-L5G unit emits U ligt armful to te eyes and skin. Always wear ligt-sielding gear to protect yourself during operation. Also, build an enclosure around te LC-L5G unit at te time of installation to prevent U ligt from leaking outward. See te instruction manual for details. Basically, tere are no legal responsibilities suc as aving to submit official notifications, etc. Ceck te legal regulations in your country for more information. 13
14 Options U INTENSIRY INTEGRABLE POER METER Hamamatsu also provides U power meters designed to measure U irradiance and accumulated amount of ligt. Tese U power meters exibit a minimum decrease in sensitivity against U exposure and so allow reliable measurement wit good reproducibility. Sensitive wavelengt range avelengt of sensitivity (Max.) Calibrated wavelengt Effective area Measurement range Measurement mode External interface Power requirement Irradiance Integrated power Irradiance Integrated power Irradiance peak old Sensor ead H12684 series + Controller C12144 H H H H C to to m/cm 2 to 100 /cm mj/cm 2 to 9999 J/cm 2 Irradiance measurement and display mode (m/cm 2 ) Integrated power measurement and display mode (mj/cm 2 ) Peak irradiance display mode during measurement (m/cm 2 ) RS-232C, USB2.0 Two AAA batteries / Dedicated AC adapter / USB * Since te sensor is calibrated using its sensitivity wavelengts, te display value may differ wen measuring a ligt source wose spectrum differs from te sensitivity wavelengts. To maintain te reliability of te calibrated value, it is recoended to calibrate te sensor once a year. 14
15 Options LIGHT SOURCE TO POER SUPPLY CONNECTION CABLES Tese cables connect an LC-L5G to a controller power supply available from Hamamatsu. Cable lengt Compatible U-LED unit Cable lengt Compatible U-LED unit GJ-75 GL-120 GL-150C GL-250 GL GP-75 GC-77 GC-77S GC-113 Note: 1Te GL-430 requires two cables. GJ-75 GL-120 GL-150C GL-250 GL GP-75 GC-77 GC-77S GC-113 A m A m A m A m A m A m Tese cables connect an LC-L5G U-LED unit to a coercially available general-purpose power supply. Note: 1Te GL-430 requires two cables. A m A m LIGHT SOURCE TO LIGHT SOURCE CONNECTION CABLES Tis cable connects between LC-L5G U-LED units wen operating multiple units from one power supply. Cable lengt Compatible U-LED unit GP-75 1 GC-77 1 GC-77S 1 GC A Note: 1Up to 8 U-LED units can be operated by connecting tem using te cables. 2Up to 3 U-LED units can be operated by connecting tem using te cables. A
16 PRODUCTION PROCESS SUPPORT PRODUCTS Hamamatsu provides products tat support production process, suc as for static electricity removal and surface modification (function improvement). Using tese products will elp enance performance, quality and trougput in production process. Electrostatic carge remover PotoIonBar Excimer lamp ligt source FLAT EXCIMER * LIGHTNINGCURE is a registered trademark of Hamamatsu Potonics K.K. Subject to local tecnical requirements and regulations, availability of products included in tis promotional material may vary. Please consult wit our sales office. Information furnised by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to cange witout notice. No patent rigts are granted to any of te circuits described erein Hamamatsu Potonics K.K. HAMAMATSU PHOTONICS K.K. HAMAMATSU PHOTONICS K.K., Electron Tube Division 314-5, Simokanzo, Iwata City, Sizuoka Pref., , Japan, Telepone: (81)539/62-52, Fax: (81)539/ U.S.A.: Hamamatsu Corporation: 360 Footill Road, Bridgewater, NJ 08807, U.S.A., Telepone: (1) , Fax: (1) usa@amamatsu.com Germany: Hamamatsu Potonics Deutscland GmbH.: Arzbergerstr. 10, D Herrscing am Aersee, Germany, Telepone: (49) , Fax: (49) info@amamatsu.de France: Hamamatsu Potonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, Massy Cedex, France, Telepone: (33) , Fax: (33) infos@amamatsu.fr ed Kingdom: Hamamatsu Potonics UK Limited: 2 Howard Court,10 Tewin Road, elwyn Garden City, Hertfordsire AL7 1B, UK, Telepone: (44) , Fax: (44) info@amamatsu.co.uk Nort Europe: Hamamatsu Potonics Norden AB: Torsamnsgatan Kista, Sweden, Telepone: (46) , Fax: (46) info@amamatsu.se Italy: Hamamatsu Potonics Italia S.r.l.: Strada della Moia, 1 int. 6, Arese (Milano), Italy, Telepone: (39) , Fax: (39) info@amamatsu.it Cina: Hamamatsu Potonics (Cina) Co., Ltd.: 1201 Tower B, Jiaming Center, 27 Dongsanuan Beilu, Caoyang District, Beijing, Cina, Telepone: (86) , Fax: (86) pc@amamatsu.com.cn Taiwan: Hamamatsu Potonics Taiwan Co., Ltd.: 8F-3, No.158, Section2, Gongdao 5t Road, East District, Hsincu, 300, Taiwan R.O.C. Telepone: (886) , Fax: (886) info@tw.pk.co.jp TLSZ1032E02 SEPT IP
XENON FLASH LAMP MODULES
LAMP COMPACT W MODULES : L/L series (side-on type) : L/L series (head-on type) : L/L series (high output type) : L (SMA fiber adapter type) : L/L series (high precision type) : L/L series (silent type)
More information5 W XENON FLASH LAMP MODULES
LAMP W XENON FLASH LAMP MODULES : L/L series (side-on type) : L/L series (head-on type) : L/L series (high output type) : L (SMA fiber adapter type) : L/L series (high precision type) : L/L series (silent
More informationHigh power LED, peak emission wavelength: 1.45 µm
High power LED, peak emission wavelength:.45 µm The is a high-power LED that emits infrared light at a peak of.45 µm. A bullet-shaped package () and a surface mount type () are available. It offers high
More informationCompact SMD type high output LED
Compact SMD type high output LED The is a small-size LED available in a surface mount COB package. Its size is drastically reduced compared to the previous premolded type. Features Applications High output
More informationInGaAs PIN photodiodes
area from ϕ0.3 mm to ϕ5 mm InGaAs PIN photodiodes have large shunt resistance and feature very low noise. Hamamatsu provides various types of InGaAs PIN photodiodes with photosensitive area from ϕ0.3 mm
More informationInGaAs PIN photodiodes
Long wavelength type (cutoff wavelength: 2.05 to 2.1 μm) Features Cutoff wavelength: 2.05 to 2.1 μm Low cost Photosensitive area: φ0.3 to φ3 mm Low noise High sensitivity High reliability High-speed response
More informationInGaAs PIN photodiodes
Long wavelength type (cutoff wavelength: 2.55 to 2.6 μm) Features Cutoff wavelength: 2.55 to 2.6 μm Low cost Photosensitive area: φ0.3 to φ3 mm Low noise High sensitivity High reliability High-speed response
More informationInAs photovoltaic detectors
P9 series P763 Low noise, high reliability infrared detectors (for 3 µm band) InAs photovoltaic detectors have high sensitivity in the infrared region around 3 µm as with PbS photoconductive detectors,
More informationInAs photovoltaic detectors
P9 series P763 Low noise, high reliability infrared detectors (for 3 μm band) InAs photovoltaic detectors have high sensitivity in the infrared region around 3 μm as with PbS photoconductive detectors,
More informationInGaAs PIN photodiodes
area from ϕ0.3 mm to ϕ5 mm InGaAs PIN photodiodes have large shunt resistance and feature very low noise. Hamamatsu provides various types of InGaAs PIN photodiodes with photosensitive area from ϕ0.3 mm
More informationPhoto IC diode. Wide operating temperature: -40 to +105 C. S MT. Absolute maximum ratings
Wide operating temperature: -40 to +05 C The photo IC has a spectral response close to human eye sensitivity. Two active areas are made on a single chip. Almost only the visible range can be measured by
More informationRadiation detection modules
C7 series High accuracy, high sensitivity, compact radiation detection module The C7 series is a radiation detection module containing a scintillator and MPPC (multi-pixel photon counter) designed to detect
More informationEnergy saving sensors for TV brightness controls, etc.
S7184 Linear current amplification of photodiode output The and S7184 consist of a photodiode and a signal processing circuit for amplifying the photocurrent generated from the photodiode up to 1300 times.
More informationMini-spectrometers. TM series. High sensitivity type (integrated with backthinned type CCD image sensor) C10082CA/C10083CA series
C12CA/C13CA series High sensitivity type (integrated with backthinned type CCD ) mini-spectrometers are polychromators integrated with optical elements, an and a driver circuit. Light to be measured is
More informationMEMS-FPI spectrum sensor
Ultra-compact near infrared spectrum sensor that integrates MEMS tunable filter and photosensor The MEMS-FPI spectrum sensor is a ultra-compact sensor that houses a MEMS-FPI (Fabry-Perot Interferometer)
More informationSi photodiodes with preamp
Si photodiodes with preamp Photodiode and preamp integrated with feedback resistance and capacitance The and are low-noise sensors consisting of Si photodiode, op amp, and feedback resistance and capacitance,
More informationLCOS-SLM (Liquid Crystal on Silicon - Spatial Light Modulator)
POWER LCOS-SLM CONTROLLER RESET POWER OUTPUT ERROR LCOS-SLM (Liquid Crystal on Silicon - Spatial Light Modulator) Control your light! Shape your beam! Improve your image! The devices are a reflective type
More informationSi photodiodes with preamp
Si photodiodes with preamp Photodiode and preamp integrated with feedback resistance and capacitance The and are low-noise sensors consisting of Si photodiode, op amp, and feedback resistance and capacitance,
More informationApplications S S S S 1024
IMAGE SENSOR NMOS linear image sensor S9/S9 series Built-in thermoelectric cooler ensures long exposure time and stable operation. NMOS linear image sensors are self-scanning photodiode arrays designed
More informationPhoto IC diodes S SB S CT. Spectral response close to human eye sensitivity. Absolute maximum ratings (Ta=25 C)
Photo IC diodes S9066-211SB S9067-201CT Spectral response close to human eye sensitivity The S9066-211SB, S9067-201CT photo ICs have spectral response close to human eye sensitivity. Two photosensitive
More informationDigital Cameras for Microscopy
Digital Cameras for Microscopy Fast frame rate and high sensitivity EM-CCD (Electron multiplication CCD) cameras High dynamic range Enhanced Ideal format for short exposures, fast frame rate and high dynamic
More informationContour Measuring System CONTRACER CV-1000/2000
Form Measurement Contour Measuring System CONTRACER CV-1000/2000 Bulletin No. 1978 Digital, cost-effective contour measuring instruments feature excellent portability and versatility. Digital analysis
More informationContour Measuring System CONTRACER CV-1000/2000
Form Measurement Contour Measuring System CONTRACER CV-1000/2000 Catalog No.E4333-218 Digital, cost-effective contour measuring instruments feature excellent portability and versatility. Digital analysis
More informationCMOS linear image sensors
CMOS linear image sensors S10121 to S10124 series (-01) Higher UV sensitivity than previous type, current-output type sensors with variable integration time function The S10121 to S10124 series are self-scanning
More informationCMOS linear image sensors
CMOS linear image sensors S12198 series (-01) Smoothly varying spectral response characteristics in UV region The S12198 series are CMOS linear image sensors using a vertically long pixels (25 500 µm).
More informationCMOS linear image sensor
Achieves high sensitivity by adding an amplifier to each pixel The is a CMOS linear image sensor that achieves high sensitivity by adding an amplifier to each pixel. It has a long photosensitive area (effective
More informationCMOS linear image sensor
RGB color image sensor The is a CMOS linear image sensor that is sensitive to red (630 nm), green (540 nm), and blue (460 nm). Filters are attached to the pixels in the following order: R, G, and B. Features
More informationCMOS linear image sensor
CMOS linear image sensor S11639-01 High sensitivity, photosensitive area with vertically long pixels The S11639-01 is a high sensitivity CMOS linear image sensor using a photosensitive area with vertically
More informationPhotodiode arrays with amplifiers
Photodiode arrays with amplifiers S3885 series Photodiode arrays combined with signal processing IC for X-ray detection The S3885 series are photodiode arrays with amplifiers having a phosphor sheet attached
More informationPHOTOMULTIPLIER TUBE MODULES, NEW RELEASED PAMPHLET
PHOTOMULTIPLIER TUBE MODULES, NEW RELEASED PAMPHLET This pamphlet is gathered up the new released products from January 9. Photomultiplier tube (PMT) module functions are shown in the chart below. PMT
More information01 12-bit digital output
12-bit digital output The is a digital color sensor sensitive to red (λ=615 nm), green (λ=540 nm) and blue (λ=465 nm) regions of the spectrum. Detected signals are serially output as 12-bit digital data.
More informationPMA-12. Photonic multichannel analyzer. Scientific applications. Industrial applications. UV to visible spectroscopy. Fluorescence spectroscopy
Photonic multichannel analyzer Scientific applications UV to visible spectroscopy Fluorescence spectroscopy Raman scattering Chemiluminescence analysis Liquid chromatography Gas chromatography ICP emission
More informationIndirect Measurement
exploration Georgia Performance Standards M6G1.c, M6A2.c, M6A2.g Te eigts of very tall structures can be measured indirectly using similar figures and proportions. Tis metod is called indirect measurement.
More informationResearch on harmonic analysis and Simulation of grid connected synchronous motor Jian Huang1,a, Bingyang Luo2,b
5t nternational Conference on Environment, Materials, Cemistry and Power Electronics (EMCPE 06) Researc on armonic analysis and Simulation of grid connected syncronous motor Jian Huang,a, Bingyang Luo,b
More informationOn the relation between radiated and conducted RF emission tests
Presented at te 3 t International Zuric Symposium on Electromagnetic Compatibility, February 999. On te relation between radiated and conducted RF emission tests S. B. Worm Pilips Researc Eindoven, te
More informationCCD image sensors. Improved etaloning characteristics, High-speed type and low noise type available. S11071/S series
Improved etaloning characteristics, High-speed type and low noise type available The are back-thinned CCD image sensors designed for spectrometers. Two types consisting of a high-speed type (S11071 series)
More informationPhotodiode arrays with ampli er
Photodiode array combined with signal processing IC The S8866-64 and S8866-128 are Si photodiode arrays combined with a signal processing IC chip. The signal processing IC chip is formed by CMOS process
More informationTDI-CCD area image sensor
S8658-01/01F Image sensor with a long, narrow photosensitive area for X-ray imaging The S8658-01 is an front-illuminated FFT-CCD image sensor developed for X-ray imaging. A F (Fiber Optic plate with Scintillator)
More informationIMAGE ILLUMINATION (4F 2 OR 4F 2 +1?)
IMAGE ILLUMINATION ( OR +?) BACKGROUND Publications abound wit two differing expressions for calculating image illumination, te amount of radiation tat transfers from an object troug an optical system
More informationTECHNICAL INFORMATION. How to Use UVTRON
TECHNICAL INFORMATION How to Use The is a sensor sensitive only to ultraviolet light with wavelengths shorter than 26 nm. Featuring high sensitivity high output, and high-speed response, the is the ideal
More informationUnit 5 Waveguides P a g e 1
Unit 5 Waveguides P a g e Syllabus: Introduction, wave equation in Cartesian coordinates, Rectangular waveguide, TE, TM, TEM waves in rectangular guides, wave impedance, losses in wave guide, introduction
More informationTechnical note EM-CCD CAMERA. 1. Introduction
EM-CCD CAMERA Technical note 1. Introduction 2. Technologies of cooled CCD cameras 2.1 Hermetic vacuum-sealed chamber 2.2 Advantages of an Interline Transfer CCD (ER-150 CCD) 2.3 Readout noise 2.4 Dark
More informationHEADSET INFORMATION ENGLISH
HEADSET INFORMATION ENGLISH FORWARD Product Safety and RF Exposure Compliance: Tis product is designed to be used in isolation or in conjunction wit a two-way radio. Before using tis product wit a two-way
More informationCalculation of Antenna Pattern Influence on Radiated Emission Measurement Uncertainty
Calculation of Antenna Pattern Influence on Radiated Emission Measurement Uncertainty Alexander Kriz Business Unit RF-Engineering Austrian Researc Centers GmbH - ARC A-444 Seibersdorf, Austria alexander.kriz@arcs.ac.at
More informationWide range of applications from Real time imaging of low light fluorescence to Ultra low light detection
Electron Multiplier CCD Camera C100-13, -14 Wide range of applications from Real time imaging of low light fluorescence to Ultra low light detection Great Stability High Sensitivity Low Noise High Resolution
More informationPhotodiode arrays with amplifiers
S865-64/-8/-56 S866-64-0/-8-0 Photodiode arrays combined with signal processing IC These are Si photodiode arrays combined with a signal processing IC chip. The signal processing IC chip is formed by CMOS
More informationPhotodiode arrays with amplifiers
S865-64/-28/-256 S866-64-02/-28-02 Photodiode arrays combined with signal processing IC The S865/S866 series are Si photodiode arrays combined with a signal processing IC chip. X-ray tolerance has been
More informationPhotodiode arrays with amplifiers
S865-64G/-8G/-56G S866-64G-0/-8G-0 Photodiode arrays combined with signal processing IC for X-ray detection These are photodiode arrays with an amplifier and a phosphor sheet attached to the photosensitive
More informationAnalysis of Rectangular Notch Antenna for Dual-Band Operation
Engineering, 00,, 9-96 doi:0.436/eng.00.0 Publised Online February 00 (ttp://www.scirp.org/journal/eng). Analysis of Rectangular Notc Antenna for Dual-Band Operation Abstract Rajes Kumar Viswakarma, Sanjay
More informationCCD linear image sensor
CCD linear image sensor S11151-2048 High sensitivity in the ultraviolet region, front-illuminated CCD Despite a front-illuminated CCD, the S11151-2048 offers high sensitivity in the ultraviolet region
More informationCCD linear image sensor
CCD linear image sensor S11151-2048 High sensitivity in the ultraviolet region, front-illuminated CCD Despite a front-illuminated CCD, the S11151-2048 offers high sensitivity in the ultraviolet region
More informationEnhanced near infrared sensitivity: QE=40% (λ=1000 nm)
IR-enhanced CCD image sensors Enhanced near infrared sensitivity: QE=40% (λ=1000 nm) The is a family of FFT-CCD image sensors for photometric applications that offer improved sensitivity in the near infrared
More informationPhotodiode arrays with amplifier
/-28/-256 S8866-64-02/-28-02 Photodiode array combined with signal processing IC The /-28/-256 and S8866-64-02/-28-02 are Si photodiode arrays combined with a signal processing IC chip. The signal processing
More informationPhotosensor with front-end IC
Near infrared sensor that integrates an InGas photodiode and front-end IC The is a compact optical device that integrates an InGas photodiode and front-end IC. Signal from a photodiode that receives near
More informationApplications. active pixels [mm (H) mm(v)] S9979 Non-cooled
IMAGE SENSOR CCD area image sensor S9979 TDI operation / large active area CCD S9979 is a FFT-CCD area image sensor specifically designed for low-light-level detection in scientific applications. In particular,
More informationDimensions. Model Number. Features DAD15-8P/35. Optical data coupler
Dimensions Sensitivity adjuster 56 4 45 76 65 4 5 M6 5.5.7 0. 40. 4. 4. 5.5 4. 5.8 Model Number Optical data coupler Features 8 bit parallel data transfer Very large angle of divergence Can be connected
More informationQuantum Cascade Laser
Quantum Cascade Laser Front: QCLs Back: Set-up examples with exclusive accessories Quantum Cascade Lasers are semiconductor lasers that offer peak emission in the mid-ir range (4 µm to 10 µm). They have
More informationGATED MICROCHANNEL PLATE PHOTOMULTIPLIER TUBES (MCP-PMT) R5916U-50 SERIES
PHOTOMULTIPLIER TUBES (MCP-PMT) SERIES FEATURES High Speed Gating by Low Supply Voltage (+10 V) Gate Rise Time : 1 ns A Gate Width : 3 ns Fast Rise Time : 180 ps Narrow T.T.S. B : 90 ps High Switching
More information3D Hole Inspection Using Lens with High Field Curvature
10.1515/msr-2015-0008 MEASUREMENT SCIENCE REVIEW, Volume 15, No. 1, 2015 3D Hole Inspection Using Lens wit Hig Field Curvature Petr Zavyalov Tecnological Design Institute of Scientific Instrument Engineering,
More informationMIRROR QE=0.1 % MIRROR
MICROCHANNEL PLATE- PHOTOMULTIPLIER TUBES (MCP-PMT) SERIES FEATURES High Speed Rise Time: 160 ps IRF (Instrument Response Function) A : 55 ps (FWHM) Low Noise Compact Profile Useful Photocathode: 11 mm
More informationInput aperture size (mm) Supply voltage Features Conversion dynode ± 1.
PRODUCT LINE-UP Electron multipliers are mainly used as positive/negative ion detectors. They are also useful for detecting and measuring vacuum UV rays and soft X-rays. Hamamatsu electron multipliers
More informationDimensions. Model Number. Features DAD15-8P-R Optical data coupler
Dimensions 56 Sensitivity adjuster Mounting bracket OMH-DAD0 45 0. 76 65 4 5 5 M6.7 65.5 ø 5. 5 (4x) 5.5 6 5.8 40. 7 4. Model Number 4. 4. 5.5 Optical data coupler Features 8 bit parallel data transfer
More informationFrancesc Casanellas C. Sant Ramon, Aiguafreda - Spain NATURAL PERSPECTIVE
Francesc Casanellas C. Sant Ramon, 5 08591 Aiguafreda - Spain +34 677 00 00 00 francesc@casanellas.com - www.casanellas.com NATURAL PERSPECTIVE Introduction Te first studies on perspective were made in
More informationCCD image sensors. Improved etaloning characteristics, High-speed type and low noise type available. S11071/S series
Improved etaloning characteristics, High-speed type and low noise type available The are back-thinned CCD image sensors designed for spectrometers. Two types consisting of a high-speed type (S11071 series)
More informationThe investment casting process can produce
T E C H N I C L U P T E esigning for Investment Castings Te investment casting process can prouce almost any sape from almost any alloy. s wit all processes, owever, esigning for te process can lower cost
More informationEstimation of Dielectric Constant for Various Standard Materials using Microstrip Ring Resonator
Journal of Science and Tecnology, Vol. 9 No. 3 (017) p. 55-59 Estimation of Dielectric Constant for Various Standard Materials using Microstrip Ring Resonator Pek Jin Low 1, Famiruddin Esa 1*, Kok Yeow
More informationLecture-3 Amplitude Modulation: Single Side Band (SSB) Modulation
Lecture-3 Amplitude Modulation: Single Side Band (SSB) Modulation 3.0 Introduction. 3.1 Baseband Signal SSB Modulation. 3.1.1 Frequency Domain Description. 3.1. Time Domain Description. 3. Single Tone
More informationPublication V by author
Publication V Jyrki T. J. Penttinen. 2008. DVB H coverage estimation in igly populated urban area. In: Te 58t Annual IEEE Broadcast Symposium (ABS 2008. Alexandria, VA, USA. 15 17 October 2008. IEEE Broadcast
More informationMODERN OPTICS -1. Tutorial Solutions
MODERN OPTICS - Tutorial Solutions Reision and General Optics All questions ere are general background optics wic will be assumed in tis course. Problem 3 requires tecnical details o te microscope wic
More informationCCD area image sensor
IR-enhanced CCD area image sensor S11500-1007 Enhanced near infrared sensitivity: QE=40% (λ=1000 nm), back-thinned FFT-CCD The S11500-1007 is an FFT-CCD image sensor for photometric applications that offers
More informationCMOS linear image sensors
Built-in electronic shutter function and gain switching function The is a CMOS linear image sensor with electronic shutter function and gain switching function. The has a pixel pitch that is one-half that
More informationTechnical Specification FLUXUS F601
FLUXUS F601 Portable Ultrasonic Flow Measurement of Liquids Portable instrument for non-intrusive, quick ultrasonic flow measurement wit clamp-on tecnology for all types of piping Features Precise bi-directional
More informationLOADING OF TRANSFORMERS BEYOND NAMEPLATE RATING
LOADING OF TRANSFORMERS BEYOND NAMEPLATE RATING by K. B. M. I. Perera and J. R. Lucas Abstract Te application of a load in excess of nameplate ratings, and/or an ambient temperature iger tan designed of
More informationNear infrared/proximity type sensor
Reflective sensor with InGas photodiode and infrared housed in a compact package This reflective sensor houses an InGas PIN photodiode and 1.45 μm band in a compact package. The irradiates infrared light
More informationAmphenol FEATURES. Current Rating: 70A - 400A. Rugged, Compact & Cost Effective Power Interconnect Solution. DC Voltage Rating: 1000V
FETURES Rugged, Compact & Cost Effective Power Interconnect Solution Utilizing mpenol latest RDSOK tecnology, mpenol product line was designed wit compactness and robustness in mind. Power Interconnect
More informationTelescopes and Detectors
Telescopes and Detectors 1 Reflection and Refraction Telescopes and lenses work because of te way ligt beaves at te interface between two different media. Te speed of ligt slows wen it passes from air
More informationApplications. General ratings Parameter S S S
IMAGE SENSOR CCD area image sensor S9736 series 52 52 pixels, front-illuminated FFT-CCDs S9736 series is a family of FFT-CCD area image sensors specifically designed for low-light-level detection in scientific
More informationDamping Algorithm based on Phasor Estimation
Damping Algoritm based on Pasor Estimation Lennart Ängquist, Non-member IEEE ABB Power Systems AB S-7 64 Västerås, Sweden Abstract: Te paper describes a new metod to generate te reactance reference for
More information8-bit Microcontroller. Application Note. AVR080: ATmega103 Replaced by ATmega128
AVR080: ATmega103 Replaced by ATmega128 Features ATmega103 Errata Corrected in ATmega128 Improvements to Timers and Prescalers Oscillators and Selecting Start-up Delays Improvements to External Memory
More informationCenter for Academic Excellence. Area and Perimeter
Center for Academic Excellence Area and Perimeter Tere are many formulas for finding te area and perimeter of common geometric figures. Te figures in question are two-dimensional figures; i.e., in some
More informationDYNAMIC BEAM FORMING USING CHIRP SIGNALS
BeBeC-018-D04 DYNAMIC BEAM FORMING USING CHIRP SIGNALS Stuart Bradley 1, Lily Panton 1 and Matew Legg 1 Pysics Department, University of Auckland 38 Princes Street, 1010, Auckland, New Zealand Scool of
More informationh = v h 2 = height of the object is negative for inverted image and positive for erect image. is always positive. Direction of incident light
6. C a p t e r at G l a n c e Ligt related penomena can be studied wit mirrors and lenses. A mirror is a reflecting surface wile a lens is a transparent material. Mirrors are mainly of tree types : plane
More informationInstallation Instructions
For tecnical assistance, call 1-800-849-TECH (8324) or 336-725-1331 between 8 AM & 5 PM EST Monday troug Friday (Excluding Holidays) Installation Instructions Kaba Access Control 2941 Indiana Avenue Winston-Salem,
More informationAbstract 1. INTRODUCTION
Allocating armonic emission to MV customers in long feeder systems V.J. Gosbell and D. Robinson Integral nergy Power Quality Centre University of Wollongong Abstract Previous work as attempted to find
More informationDesign of Electrical Parameter Measurement System for Three Phase AC Motor Based on STM32
Sensors & Transducers 2014 by IFSA Publising, S. L. ttp://www.sensorsportal.com Design of Electrical Parameter Measurement System for Tree Pase AC Motor Based on STM32 Haiong Xiao, Jiming Luo, Scool of
More informationAnalysis of High Neutral Currents and Harmonic Impacts on Losses and Capacities of Distribution Transformers
roceedings of te World Congress on Engineering 06 Vol I WCE 06, June 9 - July, 06, London, U.K. Analysis of Hig Neutral Currents and Harmonic Impacts on Losses and Capacities of Distribution Transformers
More informationCCD area image sensors
CCD area image sensors S814 S811-11 Front-illuminated FFT-CCD for X-ray imaging The S814 is an FFT-CCD image sensor suitable for intra-oral X-ray imaging in dental diagnosis. The S814 has about 2 mega
More informationApplications. Number of total pixels. Number of active pixels
IMAGE SENSOR CCD area image sensor S7/S7 series Back-thinned FFT-CCD S7/S7 series is a family of FFT-CCD image sensors specifically designed for low-light-level detection in scientific applications. By
More informationOPTI-502 Optical Design and Instrumentation I John E. Greivenkamp Homework Set 5 Fall, 2018
Homework Set 5 all, 2018 Assigned: 9/26/18 Lecture 11 Due: 10/3/18 Lecture 13 Midterm Exam: Wednesday October 24 (Lecture 19) 5-1) Te following combination of tin lenses in air is in a telepoto configuration:
More informationGrade 10 Mathematics: Question Paper 2
Matematics(NSC)/Grade 10/ P2 6 Exemplar Grade 10 Matematics: Question Paper 2 MRKS: 100 TIME: 2 ours QUESTION 1 1.1 Give te co-coordinates of, te new co-ordinates ofte point (-2; 5) if: 1.1.1 It is reflected
More informationLarge Capacity 1500W of Electronic Load is realized. 4 operation modes ; constant voltage, constant current, constant power, constant resistance
Hig Power DC Electronic Loads EHD / EHHD Series NEW Large Capacity 1500W of Electronic Load is realized Hig Power DC Electronic Loads Rated voltage 150V Rated current 150A Rated power 1000W 1500W EHD /
More informationImage Reconstruction Based On Bayer And Implementation On FPGA Sun Chen 1, a, Duan Xiaofeng 2, b and Wu Qijing 3, c
2nd International Worksop on Materials Engineering and Computer Sciences (IWMECS 2015) Image Reconstruction Based On Bayer And Implementation On FPGA Sun Cen 1, a, Duan Xiaofeng 2, b and Wu Qijing 3, c
More informationph ph/orp On-Line ph/orp Measurement h h h h h h h Measuring Monitoring Controlling Wastewater Treatment Facilities Water Treatment Utilities
ph ph/orp On-Line ph/orp Measurement Measuring Monitoring Controlling Wastewater Treatment Facilities Water Treatment Utilities Neutralization Plants Surface Waters and Groundwater Food Industry Cemical
More informationSPECIFICATION SHEET JOB NAME MODEL NO. LAMP
SPECIFICATION SHEET Components LED Control CPS 0875 JOB NAME MODEL NO. LAMP Determine te maximum fi xture wattage per circuit by adding te wattage of eac fi xture togeter and coose an LED power supply
More informationA Guide for the Assessment and Mitigation of Bleed, Gloss Change, and Mold in Inkjet Prints During High-humidity Conditions
A Guide for te Assessment and Mitigation of Bleed, Gloss Cange, and Mold in Inkjet Prints During Hig-umidity Conditions Jennifer Burger; University of Rocester and Daniel Burge; Image Permanence Institute,
More informationCopyright 2005, Favour Education Centre. Mathematics Exercises for Brilliancy Book 3. Applications of trigonometry.
Unit 20 pplications of trigonometry Important facts 1. Key terms gradient ( 斜率 ), angle of inclination ( 傾斜角 ) angle of elevation ( 仰角 ), angle of depression ( 俯角 ), line of sigt ( 視線 ), orizontal ( 水平線
More informationMachine Vision System for Automatic Weeding Strategy in Oil Palm Plantation using Image Filtering Technique
Macine Vision System for Automatic Weeding Strategy in Oil Palm Plantation using Image Filtering Tecnique Kamarul Hawari Gazali, Mod. Marzuki Mustafa, and Aini Hussain Abstract Macine vision is an application
More informationS3922/S3923 series. NMOS linear image sensor. Voltage output type with current-integration readout circuit and impedance conversion circuit.
IMAGE SENSOR NMOS linear image sensor S39/S393 series Voltage output type with current-integration readout circuit and impedance conversion circuit NMOS linear image sensors are self-scanning photodiode
More informationResearch on Three-level Rectifier Neutral-Point Voltage Balance. Control in Traction Power Supply System of High. Speed Train
Researc on Tree-level Rectifier Neutral-Point Voltage Balance Control in Traction Power Supply System of Hig Speed Train LU XIAO-JUAN, WANG XIN-JU, GUO QI, LI SHU-YUAN Scool of Automation and Electric
More informationEnergy Savings with an Energy Star Compliant Harmonic Mitigating Transformer
Energy Savings wit an Energy Star Compliant Harmonic Mitigating Transformer Tony Hoevenaars, P.Eng, Vice President Mirus International Inc. Te United States Environmental Protection Agency s Energy Star
More information