Photo IC diode. Wide operating temperature: -40 to +105 C. S MT. Absolute maximum ratings
|
|
- Roberta Page
- 5 years ago
- Views:
Transcription
1 Wide operating temperature: -40 to +05 C The photo IC has a spectral response close to human eye sensitivity. Two active areas are made on a single chip. Almost only the visible range can be measured by finding the difference between the two output signals in the internal current amplifier circuit. Compared to the previous type, the has a wide operating temperature range (-40 to +05 C). Features Wide operating temperature: -40 to +05 C Spectral response close to human eye sensitivity Lower output-current variation compared with phototransistors Excellent linearity Low output deviation by different color temperature light source Suitable for lead-free reflow (RoHS compliance) Applications Automotive illuminance sensor Energy-saving sensor for TVs, etc. Various types of light level measurement Absolute maximum ratings Parameter Symbol Condition Value Unit Reverse voltage VR Ta=25 C -0.5 to +2 V Photocurrent IL Ta=25 C 5 ma Forward current IF Ta=25 C 5 ma Power dissipation* P Ta=25 C 300 mw Operating temperature Topr No dew condensation* 2-40 to +05 C Storage temperature Tstg No dew condensation* 2-40 to +25 C Reflow soldering conditions* 3 Tsol Peak temperature 250 C, two times - *: Power dissipation decreases at a rate of 3.0 mw/ C above Ta=25 C. *2: When there is a temperature difference between a product and the surrounding area in high humidity environment, dew condensation may occur on the product surface. Dew condensation on the product may cause deterioration in characteristics and reliability. *3: JEDEC level 4 Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the product within the absolute maximum ratings. Electrical and optical characteristics (Ta=25 C) Parameter Symbol Condition Min. Typ. Max. Unit Spectral response range λ to nm Peak sensitivity wavelength λp nm Dark current ID VR=5 V na Photocurrent IL VR=5 V, 2856 K, 00 lx µa Rise time* 4 tr 0 to 90%, VR=7.5 V RL=0 kω, λ=560 nm ms Fall time* 4 tf 90 to 0%, VR=7.5 V RL=0 kω, λ=560 nm ms
2 *4: Rise/fall time measurement method Pulsed light from LED (λ=560 nm) 90% Vout 2.5 V 0% Vout 0. µf 7.5 V tr tf Load resistance RL KPICC004EA Spectral response Linearity.0 (Typ. Ta=25 C, VR=5 V) 0 ma (Typ. Ta=25 C, VR=5 V, 2856 K) 0.9 Human eye sensitivity ma Relative sensitivity (%) Photocurrent 00 µa 0 µa 0.2 µa na Wavelength (nm) KPICB057EB Illuminance (lx) KPICB058EA 2
3 Rise/fall times vs. load resistance 000 (Typ. Ta=25 C, VR=7.5 V, λ=560 nm, Vo=2.5 V) Photocurrent vs. ambient temperature.4 Rise/fall times (ms) 00 0 tr tf Photocurrent (relative value) * k 0 k 00 k M Load resistance (Ω) Ambient temperature ( C) KPICB05EA * Normalized photocurrent at Ta=25 C KPICB065EA Directivity (Typ. Ta=25 C, tungsten lamp) X direction Relative sensitivity (%) Y direction Y direction X direction KPICB059EA 3
4 Block diagram Photodiode for signal offset Cathode Photodiode for signal detection The photo IC diode must be reverse-biased so that a positive potential is applied to the cathode. To eliminate high-frequency components, we recommend placing a load capacitance CL in parallel with load resistance RL as a low-pass filter. The drawing surrounded by the dotted line shows a schematic diagram of the photo IC. Current amp (approx times) Internal protection resistance (approx. 50 Ω) Reverse bias power supply Cut-off frequency fc 2π CL RL Anode Vout CL RL KPICC032EA Dimensional outline (unit: mm) 3.5 ± Photosensitive area Silicone resin ϕ ± ± 0.2 ϕ.0.5 ± Recommended land pattern Cathode Anode Tolerance unless otherwise noted: ±0. Chip position accuracy with respect to package center X, Y ±0.2 Electrode Packing: reel (000 pcs/reel) KPICA0087EB 4
5 Operating voltage, output characteristics Figure 2 shows the photocurrent vs. reverse voltage characteristics (light source: LED) for the measurement circuit example in Figure. The output curves are shown for illuminance levels. The output curves rise from a reverse voltage (rising voltage) of approximately 0.7 V (±0%). To protect the photo IC diode from excessive current, a 50 Ω (±20%) protection resistor is inserted in the circuit. Reverse voltage VR when the photo IC diode is saturated is the sum of Vbe(ON) and the voltage drop across the protection resistor Rin [Equation ()]. VR = Vbe(ON) + IL Rin... () The photodiode s reverse voltage (VR) is expressed by Equation (2) according to the voltage drop across the external resistor. This is indicated as load lines in Figure 2. VR = Vcc - IL RL... (2) In Figure 2, the intersections between the output curves and the load lines are the saturation points. From these points, the maximum detectable light level can be specified. Since the maximum light level is determined by the supply voltage (Vcc) and load resistance (RL), adjust them according to the operating conditions. Note: The temperature characteristics of Vbe(ON) is approximately -2 mv/ C, and that of the protection resistor is approximately 0.%/ C. [Figure ] Measurement circuit example IL RL (external resistor) Photo IC diode Rin=50 Ω ± 20% (internal protection resistor) Vcc KPICC028EC [Figure 2] Photocurrent vs. reverse voltage 5 4 Internal protection resistance Rin: Approx. 50 Ω (Typ. Ta=25 C) 00 lx 000 lx Photocurrent (ma) 3 2 Saturation region Approx. 260 lx Saturation region Approx. 650 lx Load line Vcc=5 V, RL= kω Load line Vcc=3 V, RL= kω 800 lx 600 lx 450 lx 220 lx Rising voltage Reverse voltage (V) KPICB060EA 5
6 Related information Precautions Disclaimer Surface mount type products Information described in this material is current as of March, 205. Product specifications are subject to change without prior notice due to improvements or other reasons. This document has been carefully prepared and the information contained is believed to be accurate. In rare cases, however, there may be inaccuracies such as text errors. Before using these products, always contact us for the delivery specification sheet to check the latest specifications. Type numbers of products listed in the delivery specification sheets or supplied as samples may have a suffix "(X)" which means preliminary specifications or a suffix "(Z)" which means developmental specifications. The product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that one year period. However, even if within the warranty period we accept absolutely no liability for any loss caused by natural disasters or improper product use. Copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission. HAMAMATSU PHOTONICS K.K., Solid State Division 26- Ichino-cho, Higashi-ku, Hamamatsu City, Japan, Telephone: (8) , Fax: (8) U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater, N.J , U.S.A., Telephone: () , Fax: () Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 0, D-822 Herrsching am Ammersee, Germany, Telephone: (49) , Fax: (49) France: Hamamatsu Photonics France S.A.R.L.: 9, Rue du Saule Trapu, Parc du Moulin de Massy, 9882 Massy Cedex, France, Telephone: 33-() , Fax: 33-() United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 0 Tewin Road, Welwyn Garden City, Hertfordshire AL7 BW, United Kingdom, Telephone: (44) , Fax: (44) North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan Kista, Sweden, Telephone: (46) , Fax: (46) Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, int. 6, Arese (Milano), Italy, Telephone: (39) , Fax: (39) China: Hamamatsu Photonics (China) Co., Ltd.: B20, Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 00020, China, Telephone: (86) , Fax: (86) Cat. No. KPIC09E06 Mar. 205 DN 6
Energy saving sensors for TV brightness controls, etc.
S7184 Linear current amplification of photodiode output The and S7184 consist of a photodiode and a signal processing circuit for amplifying the photocurrent generated from the photodiode up to 1300 times.
More informationPhoto IC diodes S SB S CT. Spectral response close to human eye sensitivity. Absolute maximum ratings (Ta=25 C)
Photo IC diodes S9066-211SB S9067-201CT Spectral response close to human eye sensitivity The S9066-211SB, S9067-201CT photo ICs have spectral response close to human eye sensitivity. Two photosensitive
More informationCompact SMD type high output LED
Compact SMD type high output LED The is a small-size LED available in a surface mount COB package. Its size is drastically reduced compared to the previous premolded type. Features Applications High output
More informationHigh power LED, peak emission wavelength: 1.45 µm
High power LED, peak emission wavelength:.45 µm The is a high-power LED that emits infrared light at a peak of.45 µm. A bullet-shaped package () and a surface mount type () are available. It offers high
More informationInGaAs PIN photodiodes
area from ϕ0.3 mm to ϕ5 mm InGaAs PIN photodiodes have large shunt resistance and feature very low noise. Hamamatsu provides various types of InGaAs PIN photodiodes with photosensitive area from ϕ0.3 mm
More informationInGaAs PIN photodiodes
area from ϕ0.3 mm to ϕ5 mm InGaAs PIN photodiodes have large shunt resistance and feature very low noise. Hamamatsu provides various types of InGaAs PIN photodiodes with photosensitive area from ϕ0.3 mm
More informationInGaAs PIN photodiodes
Long wavelength type (cutoff wavelength: 2.05 to 2.1 μm) Features Cutoff wavelength: 2.05 to 2.1 μm Low cost Photosensitive area: φ0.3 to φ3 mm Low noise High sensitivity High reliability High-speed response
More informationInAs photovoltaic detectors
P9 series P763 Low noise, high reliability infrared detectors (for 3 μm band) InAs photovoltaic detectors have high sensitivity in the infrared region around 3 μm as with PbS photoconductive detectors,
More informationInGaAs PIN photodiodes
Long wavelength type (cutoff wavelength: 2.55 to 2.6 μm) Features Cutoff wavelength: 2.55 to 2.6 μm Low cost Photosensitive area: φ0.3 to φ3 mm Low noise High sensitivity High reliability High-speed response
More informationInAs photovoltaic detectors
P9 series P763 Low noise, high reliability infrared detectors (for 3 µm band) InAs photovoltaic detectors have high sensitivity in the infrared region around 3 µm as with PbS photoconductive detectors,
More informationSi photodiodes with preamp
Si photodiodes with preamp Photodiode and preamp integrated with feedback resistance and capacitance The and are low-noise sensors consisting of Si photodiode, op amp, and feedback resistance and capacitance,
More informationSi photodiodes with preamp
Si photodiodes with preamp Photodiode and preamp integrated with feedback resistance and capacitance The and are low-noise sensors consisting of Si photodiode, op amp, and feedback resistance and capacitance,
More information01 12-bit digital output
12-bit digital output The is a digital color sensor sensitive to red (λ=615 nm), green (λ=540 nm) and blue (λ=465 nm) regions of the spectrum. Detected signals are serially output as 12-bit digital data.
More informationCMOS linear image sensor
Achieves high sensitivity by adding an amplifier to each pixel The is a CMOS linear image sensor that achieves high sensitivity by adding an amplifier to each pixel. It has a long photosensitive area (effective
More informationMEMS-FPI spectrum sensor
Ultra-compact near infrared spectrum sensor that integrates MEMS tunable filter and photosensor The MEMS-FPI spectrum sensor is a ultra-compact sensor that houses a MEMS-FPI (Fabry-Perot Interferometer)
More informationCMOS linear image sensor
CMOS linear image sensor S11639-01 High sensitivity, photosensitive area with vertically long pixels The S11639-01 is a high sensitivity CMOS linear image sensor using a photosensitive area with vertically
More informationPhotodiode arrays with ampli er
Photodiode array combined with signal processing IC The S8866-64 and S8866-128 are Si photodiode arrays combined with a signal processing IC chip. The signal processing IC chip is formed by CMOS process
More informationCMOS linear image sensors
CMOS linear image sensors S10121 to S10124 series (-01) Higher UV sensitivity than previous type, current-output type sensors with variable integration time function The S10121 to S10124 series are self-scanning
More informationPhotodiode arrays with amplifiers
Photodiode arrays with amplifiers S3885 series Photodiode arrays combined with signal processing IC for X-ray detection The S3885 series are photodiode arrays with amplifiers having a phosphor sheet attached
More informationCMOS linear image sensor
RGB color image sensor The is a CMOS linear image sensor that is sensitive to red (630 nm), green (540 nm), and blue (460 nm). Filters are attached to the pixels in the following order: R, G, and B. Features
More informationRadiation detection modules
C7 series High accuracy, high sensitivity, compact radiation detection module The C7 series is a radiation detection module containing a scintillator and MPPC (multi-pixel photon counter) designed to detect
More informationPhotodiode arrays with amplifiers
S865-64/-8/-56 S866-64-0/-8-0 Photodiode arrays combined with signal processing IC These are Si photodiode arrays combined with a signal processing IC chip. The signal processing IC chip is formed by CMOS
More informationCMOS linear image sensors
CMOS linear image sensors S12198 series (-01) Smoothly varying spectral response characteristics in UV region The S12198 series are CMOS linear image sensors using a vertically long pixels (25 500 µm).
More informationPhotodiode arrays with amplifiers
S865-64/-28/-256 S866-64-02/-28-02 Photodiode arrays combined with signal processing IC The S865/S866 series are Si photodiode arrays combined with a signal processing IC chip. X-ray tolerance has been
More informationApplications S S S S 1024
IMAGE SENSOR NMOS linear image sensor S9/S9 series Built-in thermoelectric cooler ensures long exposure time and stable operation. NMOS linear image sensors are self-scanning photodiode arrays designed
More informationPhotodiode arrays with amplifiers
S865-64G/-8G/-56G S866-64G-0/-8G-0 Photodiode arrays combined with signal processing IC for X-ray detection These are photodiode arrays with an amplifier and a phosphor sheet attached to the photosensitive
More informationNear infrared/proximity type sensor
Reflective sensor with InGas photodiode and infrared housed in a compact package This reflective sensor houses an InGas PIN photodiode and 1.45 μm band in a compact package. The irradiates infrared light
More informationCCD linear image sensor
CCD linear image sensor S11151-2048 High sensitivity in the ultraviolet region, front-illuminated CCD Despite a front-illuminated CCD, the S11151-2048 offers high sensitivity in the ultraviolet region
More informationPhotodiode arrays with amplifier
/-28/-256 S8866-64-02/-28-02 Photodiode array combined with signal processing IC The /-28/-256 and S8866-64-02/-28-02 are Si photodiode arrays combined with a signal processing IC chip. The signal processing
More information5 W XENON FLASH LAMP MODULES
LAMP W XENON FLASH LAMP MODULES : L/L series (side-on type) : L/L series (head-on type) : L/L series (high output type) : L (SMA fiber adapter type) : L/L series (high precision type) : L/L series (silent
More informationCMOS linear image sensors
Built-in electronic shutter function and gain switching function The is a CMOS linear image sensor with electronic shutter function and gain switching function. The has a pixel pitch that is one-half that
More informationPhotosensor with front-end IC
Near infrared sensor that integrates an InGas photodiode and front-end IC The is a compact optical device that integrates an InGas photodiode and front-end IC. Signal from a photodiode that receives near
More informationMini-spectrometers. TM series. High sensitivity type (integrated with backthinned type CCD image sensor) C10082CA/C10083CA series
C12CA/C13CA series High sensitivity type (integrated with backthinned type CCD ) mini-spectrometers are polychromators integrated with optical elements, an and a driver circuit. Light to be measured is
More informationLCOS-SLM (Liquid Crystal on Silicon - Spatial Light Modulator)
POWER LCOS-SLM CONTROLLER RESET POWER OUTPUT ERROR LCOS-SLM (Liquid Crystal on Silicon - Spatial Light Modulator) Control your light! Shape your beam! Improve your image! The devices are a reflective type
More informationXENON FLASH LAMP MODULES
LAMP COMPACT W MODULES : L/L series (side-on type) : L/L series (head-on type) : L/L series (high output type) : L (SMA fiber adapter type) : L/L series (high precision type) : L/L series (silent type)
More informationCCD linear image sensor
CCD linear image sensor S11151-2048 High sensitivity in the ultraviolet region, front-illuminated CCD Despite a front-illuminated CCD, the S11151-2048 offers high sensitivity in the ultraviolet region
More informationCCD image sensors. Improved etaloning characteristics, High-speed type and low noise type available. S11071/S series
Improved etaloning characteristics, High-speed type and low noise type available The are back-thinned CCD image sensors designed for spectrometers. Two types consisting of a high-speed type (S11071 series)
More informationEnhanced near infrared sensitivity: QE=40% (λ=1000 nm)
IR-enhanced CCD image sensors Enhanced near infrared sensitivity: QE=40% (λ=1000 nm) The is a family of FFT-CCD image sensors for photometric applications that offer improved sensitivity in the near infrared
More informationTDI-CCD area image sensor
S8658-01/01F Image sensor with a long, narrow photosensitive area for X-ray imaging The S8658-01 is an front-illuminated FFT-CCD image sensor developed for X-ray imaging. A F (Fiber Optic plate with Scintillator)
More informationApplications. active pixels [mm (H) mm(v)] S9979 Non-cooled
IMAGE SENSOR CCD area image sensor S9979 TDI operation / large active area CCD S9979 is a FFT-CCD area image sensor specifically designed for low-light-level detection in scientific applications. In particular,
More informationCCD area image sensor
IR-enhanced CCD area image sensor S11500-1007 Enhanced near infrared sensitivity: QE=40% (λ=1000 nm), back-thinned FFT-CCD The S11500-1007 is an FFT-CCD image sensor for photometric applications that offers
More informationCCD image sensors. Improved etaloning characteristics, High-speed type and low noise type available. S11071/S series
Improved etaloning characteristics, High-speed type and low noise type available The are back-thinned CCD image sensors designed for spectrometers. Two types consisting of a high-speed type (S11071 series)
More informationApplications KMPDC0019EA. S3923 series: a=25 µm, b=20 µm Absolute maximum ratings Parameter Symbol Value
IMAGE SENSOR NMOS linear image sensor S39/S393 series Voltage output type with current-integration readout circuit and impedance conversion circuit NMOS linear image sensors are self-scanning photodiode
More informationPHOTOMULTIPLIER TUBE MODULES, NEW RELEASED PAMPHLET
PHOTOMULTIPLIER TUBE MODULES, NEW RELEASED PAMPHLET This pamphlet is gathered up the new released products from January 9. Photomultiplier tube (PMT) module functions are shown in the chart below. PMT
More informationPhoto IC for optical link
S11355-03 P11379-04AT Transmitter photo IC Receiver photo IC S11355-03 Transmitter/ receiver photo IC P11379-04AT For 150 Mbps optical link These photo ICs is capable of data communication at a transmission
More informationCCD area image sensors
CCD area image sensors S814 S811-11 Front-illuminated FFT-CCD for X-ray imaging The S814 is an FFT-CCD image sensor suitable for intra-oral X-ray imaging in dental diagnosis. The S814 has about 2 mega
More informationDigital Cameras for Microscopy
Digital Cameras for Microscopy Fast frame rate and high sensitivity EM-CCD (Electron multiplication CCD) cameras High dynamic range Enhanced Ideal format for short exposures, fast frame rate and high dynamic
More informationS3922/S3923 series. NMOS linear image sensor. Voltage output type with current-integration readout circuit and impedance conversion circuit.
IMAGE SENSOR NMOS linear image sensor S39/S393 series Voltage output type with current-integration readout circuit and impedance conversion circuit NMOS linear image sensors are self-scanning photodiode
More informationMIRROR QE=0.1 % MIRROR
MICROCHANNEL PLATE- PHOTOMULTIPLIER TUBES (MCP-PMT) SERIES FEATURES High Speed Rise Time: 160 ps IRF (Instrument Response Function) A : 55 ps (FWHM) Low Noise Compact Profile Useful Photocathode: 11 mm
More informationCCD linear image sensors
S55-048-0 S56-048-0 Back-thinned CCD image sensors with electronic shutter function The S55-048-0 and S56-048-0 are back-thinned CCD linear image sensors with an internal electronic shutter for spectrometers.
More informationCCD image sensors. Enhanced near infrared sensitivity, Constant element temperature control. S11511 series. Applications.
Enhanced near infrared sensitivity, Constant element temperature control The is a family of FFT (full frame transfer)-ccd image sensors for photometric applications that offer improved sensitivity in the
More informationGATED MICROCHANNEL PLATE PHOTOMULTIPLIER TUBES (MCP-PMT) R5916U-50 SERIES
PHOTOMULTIPLIER TUBES (MCP-PMT) SERIES FEATURES High Speed Gating by Low Supply Voltage (+10 V) Gate Rise Time : 1 ns A Gate Width : 3 ns Fast Rise Time : 180 ps Narrow T.T.S. B : 90 ps High Switching
More informationTECHNICAL INFORMATION. How to Use UVTRON
TECHNICAL INFORMATION How to Use The is a sensor sensitive only to ultraviolet light with wavelengths shorter than 26 nm. Featuring high sensitivity high output, and high-speed response, the is the ideal
More informationCCD image sensor. High-speed operation, back-thinned FFT-CCD. S9037/S9038 series. Structure
High-speed operation, back-thinned FFT-CCD The FFT-CCD image sensors were developed for high-speed line scan cameras. Since an on-chip amplifier having a wide bandwidth is used to an image sensor, a pixel
More informationApplications. General ratings Parameter S S S
IMAGE SENSOR CCD area image sensor S9736 series 52 52 pixels, front-illuminated FFT-CCDs S9736 series is a family of FFT-CCD area image sensors specifically designed for low-light-level detection in scientific
More informationCCD area image sensors
S7170-0909 S7171-0909-01 512 512 pixels, back-thinned FFT-CCD HAMAMATSU developed MPP (multi-pinned phase) mode back-thinned FFT-CCDs specifically designed for low-light-level detection in scientific applications.
More informationCCD linear image sensors
S13255-2048-02 S13256-2048-02 Back-thinned CCD image sensors with electronic shutter function The S13255-2048-02 and S13256-2048-02 are back-thinned CCD linear image sensors with an internal electronic
More informationEE-SX1330. Photomicrosensor (Transmissive) Ultra-Compact Slot / SMD Type (Slot width: 3 mm) Ordering Information
Photomicrosensor (Transmissive) EE-SX33 Ultra-Compact Slot / SMD Type (Slot width: 3 mm) PCB surface mounting type. High resolution with a.3-mm-wide aperture. Be sure to read Safety Precautions on page
More informationCMOS linear image sensor
S3774 High-speed readout (00 klines/s) The S3774 is a CMOS linear image sensor developed for industrial cameras that require high-speed scanning. The columnparallel readout system, which has a readout
More informationALS-PDIC17-55C/TR8. Surface - Mount Ambient Light Sensor. Features. Description. Applications
Features Close responsively to the human eye spectrum Light to Current, analog output Good output linearity across wide illumination range Low sensitivity variation across various light sources Operating
More informationCCD area image sensor
High sensitivity in U region, anti-blooming function included The CCD area image sensor has a back-thinned structure that enables a high sensitivity in the U to visible region as well as a wide dynamic
More informationAmbient Light Sensor Surface - Mount ALS-PDIC17-77B/TR8
Features Close responsively to the human eye spectrum Light to Current, analog output Good output linearity across wide illumination range Low sensitivity variation across various light sources Operating
More informationPMA-12. Photonic multichannel analyzer. Scientific applications. Industrial applications. UV to visible spectroscopy. Fluorescence spectroscopy
Photonic multichannel analyzer Scientific applications UV to visible spectroscopy Fluorescence spectroscopy Raman scattering Chemiluminescence analysis Liquid chromatography Gas chromatography ICP emission
More informationApplications. Number of total pixels. Number of active pixels
IMAGE SENSOR CCD area image sensor S7/S7 series Back-thinned FFT-CCD S7/S7 series is a family of FFT-CCD image sensors specifically designed for low-light-level detection in scientific applications. By
More informationNJL7502L. Ambient Light Sensor. GENERAL DESCRIPTION The NJL7502L is the photo transistor which spectral response is similar to human eye.
Ambient Light Sensor GENERAL DESCRIPTION The NJL7502L is the photo transistor which spectral response is similar to human eye. FEATURES 1. Peak wavelength 560 nm 2. Photo current 33 µa typ. Condition :
More informationNEC's HIGH CTR, 4 OR 16 PIN SOP OPTOCOUPLER
NEC's HIGH CTR, 4 OR 6 PIN SOP OPTOCOUPLER PS28- FEATURES HIGH CURRENT TRANSFER RATIO: CTR = 2% TYP @ IF = ma HIGH ISOLATION VOLTAGE: BV: 2.5 k Vr.m.s. SMALL THIN PACKAGE: 4, 6-pin SOP, Pin pitch.27 mm
More informationITR1201SR10AR/TR. Features. Description. Applications. Device Selection Guide. Revision 1. LifecyclePhase: Expired Period: Forever
Features Fast response time High sensitivity Cut-Off visible wavelength Thin Compact Pb free This product itself will remain within RoHS compliant version. Description is a light reflection switch which
More informationTechnical note EM-CCD CAMERA. 1. Introduction
EM-CCD CAMERA Technical note 1. Introduction 2. Technologies of cooled CCD cameras 2.1 Hermetic vacuum-sealed chamber 2.2 Advantages of an Interline Transfer CCD (ER-150 CCD) 2.3 Readout noise 2.4 Dark
More informationInput aperture size (mm) Supply voltage Features Conversion dynode ± 1.
PRODUCT LINE-UP Electron multipliers are mainly used as positive/negative ion detectors. They are also useful for detecting and measuring vacuum UV rays and soft X-rays. Hamamatsu electron multipliers
More informationITR1201SR10AR/TR. Features. Description. Applications. Device Selection Guide
Features Fast response time High sensitivity Cut-Off visible wavelength Thin Compact Pb free This product itself will remain within RoHS compliant version. Compliance with EU REACH. Compliance Halogen
More informationDescription. Features. Kingbright. Applications. *Video cameras
AMBIENT LIGHT PHOTO SENSOR Package Dimensions Part Number: KPS-3227SP1C Description The KPS-3227SP1C is a NPN silicon phototransistor, It is a good effective solution to the power saving of display backlighting
More informationQuantum Cascade Laser
Quantum Cascade Laser Front: QCLs Back: Set-up examples with exclusive accessories Quantum Cascade Lasers are semiconductor lasers that offer peak emission in the mid-ir range (4 µm to 10 µm). They have
More informationCadmium-free sensor with spectral response The Through-hole Type for easy implementation as a CdS cell replacement
Light Sensor (AMS, 3) Cadmium-free sensor with spectral response The Through-hole Type for easy implementation as a CdS cell replacement LIGHT SENSOR SMD type L 2.mm.79inch W 3.2mm.26inch H mm.39inch 4
More informationPreliminary ITR1502SR40A/TR8
ITR152SR4A/TR8 Preliminary Features High sensitivity Cut-Off visible wavelength Compliance Halogen Free(Br < 9ppm, Cl < 9ppm, Br+Cl < 15ppm) Compliance with EU REACH This product itself will remain within
More information[MILLIMETERS] INCHES DIMENSIONS ARE IN:
Features: Wide acceptance angle, 00 Fast response time Linear response vs Irradiance Plastic leadless chip carrier (PLCC-) Low Capacitance Top Sensing Area Tape and reel packaging Moisture Sensitivity
More informationic-sd85 olga SD2C3 Infrared LED
Rev C2, Page 1/6 FEATURES Emission peak at 850 nm matched to silicon sensors Broad irradiance pattern (lambertian profile) High temperature range -40 to 125 C High optical output power Fast switching speed
More informationNEC's HIGH SPEED (200 kbps) ANALOG OUTPUT TYPE 5 PIN SOP OPTOCOUPLER
FEATURES WIDE OPERATING VCC RANGE: VCC = -0.5 to +5 V HIGH ISOLATION VOLTAGE: BV: 2500 Vr.m.s. HIGH-SPEED RESPONSE: tphl, tplh = 5 µs MAX (@RL = 4. kω) AVAILABLE IN TAPE AND REEL: -F3, F4 ELECTRICAL CHARACTERISTICS
More informationDescription. Features. Kingbright. Applications. *Video cameras
AMBIENT LIGHT PHOTO SENSOR Package Dimensions Part Number: KPS-3227SP1C Description The KPS-3227SP1C is a NPN silicon phototransistor, It is a good effective solution to the power saving of display backlighting
More informationALS-PDIC243-3B. 5mm T-1 3/4 Ambient Light Sensor. Features. Description. Applications
Features Excellent IR-Cut performance Close responsively to the human eye spectrum Light to Current, analog output Good output linearity across wide illumination range Low sensitivity variation across
More informationAmbient Light Sensor Surface - Mount ALS-PT19-315C/L177/TR8
Features Close responsively to the human eye spectrum Light to Current, analog output Good output linearity across wide illumination range Low sensitivity variation across various light sources Guaranteed
More informationNEC's HIGH ISOLATION VOLTAGE SINGLE TRANSISTOR TYPE MULTI OPTOCOUPLER SERIES
NEC's HIGH ISOLATION VOLTAGE SINGLE TRANSISTOR TYPE MULTI OPTOCOUPLER SERIES PS26-, -2, -4 PS26L-, -2, -4 FEATURES HIGH ISOLATION VOLTAGE (BV) Vr.m.s.: normal specification products HIGH COLLECTOR TO EMITTER
More informationHIGH COLLECTOR TO EMITTER VOLTAGE DARLINGTON TRANSISTOR TYPE MULTI PHOTOCOUPLER SERIES
HIGH COLLECTOR TO EMITTER VOLTAGE DARLINGTON TRANSISTOR TYPE MULTI PHOTOCOUPLER SERIES PS2532-, -2, -4 PS2532L-, -2, -4 FEATURES HIGH ISOLATION VOLTAGE BV: 5 k Vr.m.s. MIN HIGH COLLECTOR TO EMITTER VOLTAGE
More informationPD438B/S46 Features Descriptions Applications Device Selection Guide Chip LED Part No. Lens Color Material
Features Fast response times High photo sensitivity Small junction capacitance Pb free The product itself will remain within RoHS compliant version. Compliance with EU REACH Descriptions is a high speed
More informationic-sn85 BLCC SN1C INFRARED LED
Rev B3, Page 1/6 FEATURES Emission peak at 850 nm matched to silicon sensors Optimized irradiance pattern High temperature range -40 to 125 C High optical output power Fast switching speed APPLICATIONS
More informationAmbient Light Sensor DIP 3mm T-1 ALS-PDIC144-6C/L378
Features Close responsively to the human eye spectrum Light to Current, analog output Good output linearity across wide illumination range Low sensitivity variation across various light sources Operation
More informationPHOTOCOUPLER PS2801A-1,PS2801A-4
PHOTOCOUPLER PS280-1,PS280-4 HIGH ISOLATION VOLTAGE SSOP PHOTOCOUPLER NEPOC Series DESCRIPTION The PS280-1 and PS280-4 are optically coupled isolators containing a GaAs light emitting diode and an NPN
More informationHIGH ISOLATION VOLTAGE 4-PIN SOP PHOTOCOUPLER
DESCRIPTION HIGH ISOLATION VOLTAGE 4-PIN SOP PHOTOCOUPLER PHOTOCOUPLER NEPOC Series The is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon phototransistor. This
More informationElectron Multiplying CCD Camera. series
Electron Multiplying CCD Camera series Multiply faster R The ImagEM X2 is an extremely versatile camera that quietly delivers 70 frames/s at full frame and up to 1076 frames/s with analog binning and regions
More informationCCD area image sensor
Back-thinned FFT-CCD The is a family of FFT-CCD image sensors specifically designed for low-light-level detection in scientific applications. By using the binning operation, the can be used as a linear
More informationic-sg85 BLCC SG1C Infrared LED
Rev B4, Page 1/6 FEATURES Emission peak at 850 nm matched to silicon sensors Optimized irradiance pattern High temperature range -40 to 125 C High optical output power Fast switching speed APPLICATIONS
More informationHIGH ISOLATION VOLTAGE AC INPUT RESPONSE TYPE MULTI PHOTOCOUPLER SERIES
HIGH ISOLATION VOLTAGE AC INPUT RESPONSE TYPE MULTI PHOTOCOUPLER SERIES PS2-, -2, -4 PS2L-, -2, -4 FEATURES HIGH ISOLATION VOLTAGE BV: kvr.m.s. MIN HIGH COLLECTOR TO EMITTER VOLTAGE VCEO: 8 V MIN HIGH
More informationGap : 3mm, Slit : 0.5mm Phototransistor Output, Case package Transmissive Photointerrupter
GP1S50J0000F Gap : 3mm, Slit : 0.5mm Phototransistor Output, Case package Transmissive Photointerrupter Description GP1S50J0000F is a standard, phototransistor output, transmissive photointerrupter with
More informationAmbient Light Sensor DIP 5mm T-1 3/4 EAALST05RDMA0
Features Close responsively to the human eye spectrum Light to Current, analog output Good output linearity across wide illumination range Low sensitivity variation across various light sources Guaranteed
More informationSilicon PIN Photodiode
VEMD550C Silicon PIN Photodiode DESCRIPTION VEMD550C is a high speed and high sensitive PIN photodiode. It is a low profile surface-mount device (SMD) including the chip with a 7.5 mm 2 sensitive area
More informationHIGH ISOLATION VOLTAGE DARLINGTON TRANSISTOR TYPE MULTI OPTOCOUPLER SERIES
HIGH ISOLATION VOLTAGE DARLINGTON TRANSISTOR TYPE MULTI OPTOCOUPLER SERIES PS262-,-2, -4 PS262L-,-2, -4 FEATURES HIGH ISOLATION VOLTAGE BV: Vr.m.s.: normal speck products HIGH CURRENT TRANSFER RATIO CTR:
More informationic-tl46 TO46-2L1 Blue LED
Rev B1, Page 1/6 FEATURES Emission peak at 460 nm Optimized irradiance pattern Temperature range -40 C to 100 C High efficiency LED chip Fast switching speed TO-46 package for flexible mounting Option:
More informationInfrared light emitting diode, top view type
Infrared light emitting diode, top view type The is a GaAs infrared light emitting diode housed in clear plastic. This device has a high luminous efficiency and a 9nm peak wavelength suitable for silicon
More informationFEATURE: Fast Response Time. High Analytic. Cut-Off Visible Wavelength λp=94nm High sensitivity. Lead Free product, in compliance with RoHS. AKE GKE D
PHOTO INTERRUPTER AKE GKE DATA SHEET REV. : 1. DATE : 2-JUN.-27 GKE GOODTAKE GKE GOODTA GOODTAKE INTERNATIONAL LTD. 1 (7) Rev 1.. 2-Jun-7 FEATURE: Fast Response Time. High Analytic. Cut-Off Visible Wavelength
More informationHIGH ISOLATION VOLTAGE SINGLE TRANSISTOR TYPE MULTI PHOTOCOUPLER SERIES
PHOTOCOUPLER PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 HIGH ISOLATION VOLTAGE SINGLE TRANSISTOR TYPE MULTI PHOTOCOUPLER SERIES NEPOC Series DESCRIPTION The PS2561A-1 is an optically coupled isolator
More informationCCD area image sensor
Low readout noise, high resolution (pixel size: 12 μm) The is a family of back-thinned FFT-CCD image sensors specifically designed for low-light-level detection in scientific applications. By using the
More information