SPECIFICATION SHEET JOB NAME MODEL NO. LAMP

Size: px

Start display at page:

Download "SPECIFICATION SHEET JOB NAME MODEL NO. LAMP"

Marjorie Long
5 years ago
Views:

1 SPECIFICATION SHEET Components LED Control CPS 0875 JOB NAME MODEL NO. LAMP Determine te maximum fi xture wattage per circuit by adding te wattage of eac fi xture togeter and coose an LED power supply tat as an available output wattage greater tan te total wattage of te fi xtures. Model Number/Style CPS 0875 Select LED Power Supply Not all options are available in all confi gurations, consult factory for details. LED POER SUPPLY SHAPE AVAILABLE OUTPUT ATTS INPUT VOLTAGE OUTPUT VOLTAGE DESCRIPTION MANUFACTURER PS AC V DC DAMP LOCATION RECOGNIZED, CLASS DIMMING AC LED PS AC V DC DAMP LOCATION RECOGNIZED, CLASS DIMMING AC LED PS AC V DC DAMP LOCATION RECOGNIZED, CLASS DIMMING AC LED PS AC V DC DAMP LOCATION RECOGNIZED, CLASS DIMMING AC LED PS AC V DC ET LOCATION RECOGNIZED, CLASS 2 IP66 RATED OSRAM SYLVANIA See CPS4 for RGB and DMX interface options. LED Power Supply Specifi cation Notes LED power supplies are ordered separately from LED fi xtures. Multiple fi xtures may be connected to one LED power supply to create a circuit. Total fi xture wattage sould not exceed te available output watts of power supply rating. Use Available Output atts. Power supplies are not sipped wit an enclosure. PSE option will include a Damp Power Supply Enclosure. Power supplies are Class 2 rated and carry a 5-year warranty. Remote iring Requirements Low voltage circuits are limited by current capacity and voltage drops troug conductors. Determine te appropriate cable following te Maximum Cable Lengt table provided. All fi xtures and circuit brances are to be wired in parallel (positive to positive, negative to negative). Install and connect LED power supply to fi xtures in accordance wit NEC and local regulations. Maximum Cable Lengt (ft) IRE AG 8 6 V DC ' 30' V DC 00 22' 35' V DC 60 38' 55' V DC 25 40' 40' Tel (262)2-420 contact@spiligting.com 204 Design modifi cation rigts reserved. 08

2 SPECIFICATION SHEET Components LED Control CPS 0875 JOB NAME MODEL NO. LAMP Enclosures for Power Supplies 3.20" 2.60" Knock-Out for /2 Trade Conduit: One Eac Side Two Total 2.2" 3.9".75" Use wit Supplies: PS5 PS6 PS7 () DIM () RGB DIM () RGB SEQ () RGB DMX 23.70" 23.0" Knock-Out for /2 Trade Conduit: One Eac Side Two Total 2.2" 3.9" 22.29" Can Accept up to te Following Supplies, or Combination of Tem (2) DIM (2) RGB DIM (2) RGB SEQ (2) RGB DMX 8.50" 8.00" Knock-Out for /2 Trade Conduit: Two on Opposite Side Four Total Use wit Supplies: PS8 7.3" 2.3" Tel (262) Design modifi cation rigts reserved. 08

$` y Œ ` Š i > > z Œ 5 z z Ê Ë Ì Í Î Ï Í Ð Ñ Ò Ó Ð TM Z Y Z [ O N X Y V S Z N \ N X [ N ] P V R +, -.. 8 9 : : ; < =. ; : / 0 2 3 4 3 5 0 6 3 4 7 -?. @ A B C D B E E 3 5 0 6 3 4 7 -? ;. G?$

3 ` y Œ ` Š i > > z Œ 5 z z Ê Ë Ì Í Î Ï Í Ð Ñ Ò Ó Ð TM Z Y Z [ O N X Y V S Z N \ N X [ N ] P V R +, : : ; < =. ; : / A B C D B E E ? ;. I C J K C L 3 F H ^ _ ` a _ ` b c d e f a _ ` i g_ f f e u u ˆ ˆ y j k k l _ l b m n o _ p p pc q r s j q t u v w x n o _ p p pc q r s uš Œ ^ _ ` a _ ` y c p` q z e y Ž ^ _ ` a _ ` i _ f f e ` c u u v { q e j q t k l _ l j k k l _ l } ` q f ` k v e l a u i ~ a v c x k l l k b f c ` c { c p ` c y x k l l k q z e ` c Œ b q g` k z b g M N O N P Q R S T U V N X Y R Y Á Â Y Ã Ä Å Æ Ç Æ È # * É! " # $! % $ & ' ( ) %! * V X \ Z [ U R N P V [ X Y Y X [ N ] P R!!!! # '!!!!! # š ' ' % ) # & " " *! ' RoHS COMPLIANT L E A D - F R E E œ ž Ÿ ª ««Ÿ ± ² ² ³ ² «³ µ ³ ² ² ³ «³ ² ª ¹ º» ž ¼ ½ ² ³ ² ³ ª ² «ª ³ «³ ² ª ¾» ž ª ³ «² ª À ««³ ² «³ «Ô Õ Ö Ø Ù Ú Û Ü Ý Ú Þ Ö ß à Ö Ø à Ø

4 J J ô ç ô ç é ü V y z { } ~ TM á â ã ä ä î ï ð ð ñ ò ó ä ñ : å æ ç è é ê ç é æ ì é ê í ã õ ä ö ø ù ú ø û û é æ ì é ê í ã õ ñ ä ý õ ä â ö ÿ ù ù ç þ 7 8 9! " " # # $ % & ' ' ' ( ) *! ( +, -. / % & ' ' ' ( ) * 0 ' ( 8, 7 : ; < = ,= 7 : ; = > >,@ A B < 8 C = D 0 E A C 0? 8,= A =, A : - 2 ( 3! ( + " # #! " " # # 4 ( " - #, 5 - / " # # " 2 8 F G D 8 F H 7, 7 C 8 < 8 0 / " # # " 6 ( 6 ( " < 8 < 8 8 C 7 7 N O P Q R S O T R S Q o p Q R q r s S t c ] d J V U w d x J V U V U V U u ] k v cd U V Z U V Z [ \ ] ^ _ ` ^ a b \ cd e ` f _ g ^ d [ \ ] ^ _ ` ^ a b \ cd e ` g j d _ d k L g f d m _ n J U V I X V X V X Y Z V U X V i V l i I J K L M J K L RoHS COMPLIANT L E A D - F R E E

5 ã ã À ³ À ³ ý ý ý : ; < = >? A B TM Ý Ü Ý Ú Þ Ò Ñ Ú Û Ü Ù Ö Ý Ú Ñ ß Ñ Ú Û Þ Ñ à Ó Ù Õ º» ¼ ¼ ½ ¾ ½ : ± ² ³ µ ³ µ ² µ ¹ Á Â Ã Ä Å Æ Ä Ç Ç µ ² µ ¹ Á ½ É Á Â Ë Å Ì Í Å Î Ï µ È ³ Ê á â ã ä â ã å æ ç è é ä â ã ì êâ é é è í î î ï â ï å ð ñ ò â ó ó óæ ô õ ö í ô ø ù ú û ñ ò â ó ó óæ ô õ ö á â ã ä â ã ü æ óã ô ý è ø ü ø ü ø ü á â ã ä â ã ì â é é è ø ã æ ø ù þ ô ÿ è í ô î ï â ï Ð Ñ Ò Ñ Ó Ô Õ Ö Ø Ù Ñ Ú Û Ü Õ í î î ï â ï ã ô é ã î ù è ï ä ø ä ù æ û î ï ï î å é æ ã æ þ æ ó ì ì ã æ ü û î ï ï î ô ý è ã æ å ô êã î ý å ê Ü 2 3 Ü ˆ 7 ž 8 ž Ÿ Ž 9 Ÿ ˆ ˆ Š Œ Ž Ž Ž š œ ž Œ Ž Œ Š Œ Ž Ÿ œ ž Œ Ž Œ Ž Œ š œ ž Œ Ž Œ Ž Ž š Ÿ ª Ž «Ù Û ß Ý Þ Ø Õ Ñ Ó Ù Þ Û Ü Ü Û Þ Ñ à Ó Õ ž Ž š ž Ž RoHS COMPLIANT L E A D - F R E E! " # $ % & $ & ' ( ) % * + ' ' $, + %, %, $ & % & - + '. %, ) ) % * / * $ 0 $ $ " " " 0 +. $ ' $, * 0. - / &. - ' $ $ " + & & + % ( ' ). ( 0

circuit, overload and overeat protection for sustained performance ide Input voltage range: 00277V AC (select models) Hig power factor and efficiency Broad ambient temperature range for use

operation Exceptional line and load regulation Product Offering OPTOTRONIC power supplies are compact and electronically stabilized.

OPTOTRONIC power supplies are protected against open circuit, sort circuit, overload and overeating conditions. Tey meet te igest industry standards.

96 96 0 Output Voltage LED power supplies compatible wit: V LED Modules *Dimmable Application Information Specifications and Certifications Applications Ambience ligting inside furniture

6 OPTOTRONIC Electronic V DC LED Power Supplies Key Features & Benefits Damp and wet rated designs available for use in outdoor applications Integrated dimming (select models) Sort circuit, overload and overeat protection for sustained performance ide Input voltage range: 00277V AC (select models) Hig power factor and efficiency Broad ambient temperature range for use in extreme application conditions Electronically stabilized output voltage wit low line ripple Compact enclosures for variety of applications and fixture designs UL Class 2 output for safe operation Exceptional line and load regulation Product Offering OPTOTRONIC power supplies are compact and electronically stabilized. Te wide range of input voltage, on select models, from 00 to 277 VAC enables worldwide use on single-pase AC power lines. Tese supplies are available wit VDC outputs. OPTOTRONIC power supplies are protected against open circuit, sort circuit, overload and overeating conditions. Tey meet te igest industry standards. Ordering Abbreviation OT6/V/20V OT7/V/UNV OT20/V/20-0V/SQ OT30/20/CORD OT50/V/20V/LP OT75/V/UNV OT96/V/UNV OT96/V/UNV/DIM* OT96/V/UNV/JBX OT0/3XV/20-0V/JBX Output attage Output Voltage LED power supplies compatible wit: V LED Modules *Dimmable Application Information Specifications and Certifications Applications Ambience ligting inside furniture Backligting Compact installations Effect ligting General ligting Low & medium power applications Panel ligting Pat and roadway marking Signs Step and seat marking all wasing OT6, OT7, OT20, OT75, OT96, OT96DIM: UL 30, UL48 Recognized for US & Canada Class 2 Unit OT50: UL30 Recognized for US & Canada Class 2 Unit OT96 (NAED 5626) & OT0 (NAED 5627): UL48 Listed for US & Canada Class 2 Unit OT30: ETL listed and conforms to UL30 OT6, OT75 are CSA approved FCC 47CFR Part 5 compliant ECS050R4 /

7 Specification Data Fixture Description: Project/Job: SYLVANIA lamp: SYLVANIA ballast: Notes: Type Ordering Information Nominal Nominal Nominal Output Max. Input Input Input Output Power Line Item Ordering Voltage Current Power Power Voltage Range Ripple UL/ETL Location Number Abbreviation (V) (A) Factor () (VDC) () (V) File # Rating 5503 OT6/V/20V ± ±0.2V E Damp 5622 OT7/V/UNV* ± ±.0V E Damp OT20/V/20-0V/SQ ± ±0.2V E Dry OT30/20/CORD ±.0-30 ±.5V Dry 5598 OT50/V/20V/LP ± ±0.2V E8522 Dry OT75/V/UNV ± ±0.2V E Damp OT96/V/UNV ± ±.0V E Damp OT96/V/UNV/JBX ± ±.0V E et UL Listed 5627 OT0/3XV/20-0V/JBX ± ±.0V E et UL Listed *7 is te minimum output power required wen operating at te 277V input voltage. Dimmable Power Supply Nominal Nominal Nominal Output Output Max. Input Input Input Voltage Power Line Item Ordering Voltage Current Power Power Range Range Ripple UL Location Number Abbreviation (V) (A) Factor () (VDC) () (V) Mode Control Range File # Rating 5520 OT96/V/UNV/DIM ± ±.0V PM 0-0V DC 0 00% E Damp Notes:. All power supplies can be remote mounted up to 32 feet. Altoug it is possible to exceed te remote mounting distance, te installer and/or end user must take precautions to prevent and/or test te effects of EMI (electromagnetic interference). 2. Use wiring rated and marked PLTC, CL3R, and sun resistant replaces 553 (OT75/20/), wic is discontinued replaces 550, wic is discontinued Ordering Guide OT 0 / 3xV / 20-0 / JBX OPTOTRONIC Output attage Output Voltage Input Voltage Junction Box Minimum and Maximum Ratings Parameter Power Supply Values Input Voltage Range (Min/Max) OT VAC OT20 and OT VAC OT30 and OT VAC OT7, OT75 and OT VAC Input Frequency 50/60Hz Ambient Temperature Range OT6, OT20 and OT50-20 C troug +50 C OT30, OT96-20 C troug +40 C OT75-25 C troug +60 C OT7, OT96JBX and OT0-30 C troug +70 C (2% de-rating per C from 50 C) Max. Case Temperature OT30 45 C OT6, OT50 70 C OT20, OT96 75 C OT7, OT75, OT96JBX and OT0 90 C ECS050R4

8 Assembly and iring Diagrams Bottom View OT6 Case: Quantity: 20 pieces/carton eigt: 0.6 lbs eac (approx.) 3.72 lbs/carton iring: Leads only (no connectors) Input: (8AG wire) Output: (8AG wire) 0.8" (20.5mm) 0.49" (2.5mm) 2.20" (55.8mm) 2.00" (50.8mm) Top View 2.04" (5.8mm) 2.04" (5.8mm) Top View 7.48" (90mm) 2.00" (50.7mm) 5.50" (40mm) Output Red Input Black lead wires (+) lead wires (L).09" (27.7mm) 0.43" 0.43" (.0mm) (.0mm) 0.88" Blue ite (22.3mm) (-) (N) Mounting Holes (2) OT7 Case: Quantity: 50 pieces/carton eigt: 0.36 lbs eac (approx.) 8.3 lbs/carton iring: Leads only (no connectors) Input: 6" (8AG wire) black & wite wires Output: 6" (8AG wire) gray+ and black wires 0.87" (22mm) 0.98" (25mm) 0.08" (2mm) 7.87" (200mm) 8.27" (20mm) 8.43" (mm) 0.6" (4mm) OT20 Case: Quantity: 30 pieces/carton eigt: 0.2 lbs eac (approx.) 6.30 lbs/carton iring: Connectors only (No leads provided) Use solid or stranded copper wire only 2.36" (60.0mm) 2.20" (56.0mm) Load side: use 30 to 4 AG wire Line side: use 20 to 2 AG wire N L VDC + Load 2.20" (56.0mm).20" (30.5mm) Line 2.36" (60.0mm) OT50 Case: Quantity: 20 pieces/carton eigt: 0.4 lbs eac (approx.) 8.5 lbs/carton.5 (38.mm) iring: Connectors only (No leads provided) Use 4-22AG solid or stranded copper wire only 8.95 (227.4mm) 9.5 (.4mm) 0.65 (6.5mm) 0.8 (4.6mm) OUTPUT Pout(max): 30 Vout: VDC Iout:.25 ADC 5.63" (43mm).4" (3.50mm).75" (9.mm) OT30 Case: Quantity: 50 pieces/carton eigt: 0.63 lbs eac (approx.) 3.77 lbs/carton.22" (5.60mm).44" (36.50mm).4" (3.50mm).2" (3mm) (2) MOUNTING HOLES 5.9" (50mm).8" (30mm).57" (40mm) SITCH LINE Pin (max): 30 Vin: 20VAC/50/60HZ Iin: 0.60A (nom.) 6 Feet.8 Meters 7 Feet 2. Meters ECS050R4

9 Assembly and iring Diagrams (continued) arranty OT75 & OT96 Case: Quantity: 0 pieces/carton eigt:.35 lbs eac (approx.) 4 lbs/carton iring: Leads only (no connectors) AC Input: 9" (8AG wire) black & wite wires Output: 9" (8AG wire) red+ & blue wires.7" (29.7mm).68" (42.7mm) 8.94" (227mm) 9.48" (0.7mm) OPTOTRONIC Products are covered by our LED Module, OPTOTRONIC Power Supply or Control arranty. For additional details, refer to te latest version of te warranty available at OT96DIM only: DIM Input: 9" (8AG wire) gray & purple DIM Output: 9" (8AG wire) yellow Black (L) ite (N) Purple (+) Gray (-) VOLTAGE V AC 50/60Hz Input 0-0 V DC NON-DIMMABLE Pout (max): 96 Vout: VDC Iout: ADC RED V DC (+) Return (-) BLUE DIM Return (-) YELLO n.c. Black (L) ite (N) Purple (+) Gray (-) VOLTAGE V AC 50/60Hz Input 0-0 V DC DIMMABLE Pout (max): 96 Vout: VDC Iout: ADC RED V DC (+) Return (-) BLUE n.c. DIM Return (-) YELLO OT96JBX Case (et Rated): Quantity: 6 pieces/carton eigt: 2 lbs eac (approx.) 33 lbs/carton iring: Leads only (2.76" 8AG wire) Input: black (L), wite (N), & green/yellow (GRD) wires wit a UL Listed, /2" metallic fitting Output: gray (+) & black ( ) wit a UL Listed, /2" plastic fitting OT0 Case: Quantity: 5 pieces/carton eigt: lbs eac (approx.) 53 lbs/carton iring: Leads only (6.9" 8AG wire) Black (L) ite (N) Green/Yellow (GRD) Line SYLVANIA, Te System Solution, and SEE THE ORLD IN A NE LIGHT are registered trademarks of OSRAM SYLVANIA Inc. OSRAM and OPTOTRONIC are registered trademarks of OSRAM AG. Specifications subject to cange witout notice. Load VDC 80 (max) 80 (max) 80 (max) Gray (+) Black (-) Gray (+) Black (-) Gray (+) Black (-) United States OSRAM SYLVANIA 00 Endicott Street Danvers, MA 0923 Trade Pone: Fax: National Accounts Pone: Fax: OEM/Special Markets Pone: Fax: Display/Optic Pone: Fax: SYLVANIA Ligting Services Pone: Fax: Canada OSRAM SYLVANIA LTD. 200 Drew Road Mississauga, ON L5S S4 Trade Pone: Fax: OEM/Special Markets/Display/Optic Pone: Fax: SYLVANIA Ligting Services Pone: Fax: Mexico OSRAM MEXICO Headquarters Tultitlan/Edo de Mexico OSRAM SYLVANIA / ECS050R4

10 preliminary spec TM POER DESIGNS ELECTRICAL SPECIFICATIONS: Model Number AC-60VDH2.5DK Type: Constant Voltage LED Driver Input Voltage: V Input Frequency: 50/60Hz Output Power Input Current Minimum PF (full load) Max. THD (full load) Output Voltage Output Current T case Maximum Minimum Starting Temp. Efficiency Up To Protocol Range IP Rating 60 IRING: 20V 277V >0.95 <0% V ±5% 0.25 to 2.5A 90 C -40 C 86.6% 0 to 0V 0 to 00% CANOPY FIXTURE DRIVER FORM FACTOR 25.4mm PHYSICAL: RED + BLUE Black IP66 ite Green Purple Gray 3.58mm 3.58mm 6mm OPENING Lead Lengts Black 5.9" Purple 5.9" ite 5.9" Gray 5.9" Green 5.9" 6.8mm 54mm 6.8mm Dimensions Diameter 6.36" eigt.32" Heigt.32" Case Qty. 30 pcs. Mounting Hole Distance 5.04" Mounting Hole Diameter 0.4" 33.5mm HEIGHT 6.5mm DIAMETER v.5 07//3 SAFETY: Meets UL Class 2 Requirements Class A sound rating Overload Protection No Exterior Case Open/Sort Circuit Protection LED driver as a life expectancy of 50,000 ours at Tcase of 75 C LED driver as a life expectancy of 00,000 ours at Tcase of 65 C arranty: 5 yrs based on max case temp of <75 C; 3 yrs based on max case temp of 90 C* Input/Output Isolation FCC Title 47 CFR Part 5 Surge Protection (2 KV) INSTALLATION: LED drivers sall be installed inside electrical enclosures 8 AG 600V/05C tinned strand copper lead-wires are required to use in installation RoHS COMPLIANT LEAD-FREE Max Remote installation distance is 38 ft LED driver cases sould be grounded *A.C.E. warrants to te purcaser tat eac LED Driver will be free from defects in material or workmansip for a period of 5 years wen operated at max case temp of up to <75 C; 3 years from date of manufacture wen operated at a max case temp of up to 90 C wen properly installed and under normal conditions of use. See for complete warranty policy. 203 Revised 08/07/3 340 Avenue D, Arlington, TX Data is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary depending on operating conditions. Specifications are subject to cange witout notice. All specifications are nominal unless oterwise noted.

OPTOTRONIC LED Power Supply OT40W Programmable - Technical Specifications

www.osramamericas.com/optotronic OPTOTRONIC LED Power Supply OT40W Programmable - Technical Specifications GENERAL INFORMATION Item Number(s) Type Output Power Programming tool Software 79441 (1 %, J-type)