3 in 1 Dimmable (0-10Vdc, PWM signal, or resistance)

Transcription

1 FEATURES: AC Input 100~277VAC Built-in Active PFC Function Protection: SCP / OVP / OTP 12V Auxiliary Output Built-in 3 in 1 dimming function (0-10Vdc, 10V PWM signal, or resistance) Power saving < 0.35W at Dim to off. Flicker Free High Operating Ambient Temp.: -40 ~+60 Surge protection: L-N 4KV, L-FG/N-FG 6KV Safety: UL 8750 EMI: FCC Part 15 Class B / CE IP 67 Compliant Warranty: 3 years (refer to warranty policy) RoHS Compliant MODEL HVO100U351FFB0 HVO100U701FFB HVO100U112FFB HVO120U701FFB HVO120U112FFB0 HVO120U182FFB0 HVO150U142FFB0 DC OUTPUT POWER (W) HVO100U142FFB DC OUTPUT VOLTAGE (V) PRODUCT SPECIFICATION OUTPUT CURRENT (A) OUTPUT CURRENT TOLERANCE HVO120U142FFB HVO150U701FFB HVO150U112FFB HVO150U182FFB HVO150U212FFB0 EFFICIENCY (Ref.) Power Factor (Typ.) 100VAC 120VAC 200VAC 277VAC 100VAC 120VAC 200VAC 277VAC 86.0% 88.0% 90.0% 90.0% % 88.0% 90.0% 90.0% % 87.0% 90.0% 90.0% % 87.0% 90.0% 90.0% % 86.0% 89.0% 90.0% % 86.0% 89.0% 90.0% % 88.0% 91.0% 92.0% % 88.0% 91.0% 92.0% Input Specifications Input Voltage Range 90 Units Input Current (150-HVO) 1.76 A 100VAC in Total Harmonics Distortion (THD) 20 Output Specifications Auxiliary Output Voltage Short Circuit Protection Over Voltage Protection Over Temp Protection (Tc) Min. Input Frequency Range Input Current (100-HVO) 1.22 Inrush Current 65 Line Regulation ±3 Load Regulation ±3 Output Current Regulation ±5 Ripple and Noise (pk-pk) 1 Ripple Current Min. Auxiliary Output Source Current 0 Protection Functions Min. Typ. Typ. Max. Leakage Current 0.75 Power Factor (PF) 0.9 Typ. Input Current (120-HVO) 1.41 <30% of rated output current Turn-on Delay Time Max Max. Vac Hz A A A ma % Units % % % V s V A Units 100VAC in 100VAC in 230VAC in,25 Cold start 277VAC in VAC,100% load 20MHz Bandwidth. Conditions/Description Conditions/Description *Measured at electronic load LED mode and nominal input voltage with DC10V dimming. *Measured at VAC and at full load. ± 10% Tolerance (Available for customization) Auto recovery Auto recovery Auto recovery Conditions/Description

2 Environmental Conditions Min. Typ. Max. Units Conditions/Description Operating Temperature (Ta) Non-condensing Operating Humidity %RH Non-condensing Operating Case Temperature (Tc) 86 Case temperature measured at the case hot spot Measured at 277VAC,Ta 60 Storage Temperature Non-condensing Storage Humidity %RH Non-condensing Life Time Measured at 277VAC, 45,000 hours at Tc 75 C Dimensions(L*W*H) 219 * 64.1 * 35.5 mm 8.62* 2.52 * 1.40 inch Weight EMC Compliance and Safety Conducted and Radiated Emmission Harmonic Current Emissions Voltage Fluctuations & Flicker Electrostatic Discharge (ESD) RF Electromagnetic Field Susceptibility Electrical Fast Transient EMS Standards Surge Immunity UL PSE Notes Conducted RF Disturbances Power Frequency Magnetic Field Voltage Dips (1) All specifications unless otherwise noted, at normal line and load. (2) Ripple and Noise measured directly at pins/terminals at nom. load, 0.1uF bypass and 47uF electrolytic, bandwidth. (3) Specified for free-air convection cooling. (4) 3 in 1 Dimming function.(analog voltage 0~10VDC ; 10V PWM signal 500Hz ~ 10 KHz ; Resistor 1K~100K) (4) Minimum load is NOT required for proper operation. 990 Comply with EN (CISPR15) Comply with EN Comply with EN Comply with IEC Comply with IEC Comply with IEC Comply with IEC Comply with IEC Comply with IEC Comply with IEC g EMC Compliance Safety Comply with UL 8750 Comply with PSE 8 KV air discharge, 4 KV contact discharge L-N 4KV, L-FG/N-FG 6KV *REFERENCE: *Please contact sales@linkcom.com.tw, sales@linkcomusa.com for more information

3 DERATING CURVE (HVO-100W) DERATING CURVE (HVO-120W) DERATING CURVE (HVO-150W)

4 DIMENSIONS *The above mechanical diagram is for reference only. The actual product should be in accordance with the specification for approval. *REFERENCE:

5 DIMMING OPERATION DC 0-10V Dimmiable Parameters Minimum Typical Maximum Absolute maximum voltageon on the 0-10(+) Purple Wire 0V 10V Source current on the 0-10V(+) Purple Wire 0mA 1mA RED (LED+) BLACK (LED-) BROWN (AUX+) PURPLE (DIM+) GRAY (AUX-/DIM-) Dimmer SENSOR Compatible Occupancy Sensors Manufacturer Sensor Model number IR-TEC BOA 5xx Series 12~24VDC Acuity Brands Lighting Sensor Switch MSOD 7 12~24VDC DC 0-10V Dimming Performance Notes: 1. Purple and Gray wires on the output side are used for 0-10V dimming. 2. Recommended dimmers are Leviton IP710,Lutron NTSTV-DV or equivalent. 3. When dimming wires +Purple/-Gray are left open, the output current will be at 100%.

6 PWM Dimmiable Parameters Minimum Typical Maximum Input LOW Level Voltage Range (Purple Wire) 0V Input HIGH Level Voltage Range (Purple Wire) 10V Current into PWM Input (Purple Wire) 0.1mA PWM Input Signal Frequency 500Hz 10KHz PWM Dimmiable Duty cycle 0%~100% 10V 1KHz Dimming Performance Dimmiable External Resistor Parameters Minimum Typical Maximum Resistance range of Dimmable 10K 100K Resistance of Dim to off 5K Dimmiable External Resistor Dimming Performance

7 THD (%) Efficiency (%) Output Current (A) Output Current vs. Load (HVO150U142FFB0) Output Current vs. Load Vin=100 Vin=120 Vin= Vin=230 Vin= % 50% 60% 70% 80% 90% 100% 110% Load (%) Efficiency vs. Load (HVO150U142FFB0) 100.0% Efficiency vs. Load 90.0% 80.0% Vin=100 Vin= % Vin=200 Vin=230 Vin= % 40% 50% 60% 70% 80% 90% 100% 110% Load (%) THD vs. Load (HVO150U142FFB0) 50.0% THD vs. Load 40.0% 30.0% 20.0% Vin=100 Vin= % Vin=200 Vin=230 Vin= % 40% 50% 60% 70% 80% 90% 100% 110% Load (%)

8 Power Factor PF vs. Load (HVO150U142FFB0) 1.00 PF vs. Load Vin= Vin=120 Vin= Vin=230 Vin= % 50% 60% 70% 80% 90% 100% 110% Load (%)