From Off-The-Shelf to Market-Ready New Age Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your
|
|
- Fay Little
- 5 years ago
- Views:
Transcription
1
2 From Off-The-Shelf to Market-Ready New ge Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your end-use. visit newageenclosures.com/services or call 855-4N-ENCL today.
3 NOTES: UNLESS OTHERWISE SPECIFIED. CORNERS DRWN SHRP TO BE R.005 MXIMUM. 2. EXTERIOR SURFCE TEXTURE TO BE LIGHT EDM FINISH. EQUIVLENT TO MT INTERIOR SURFCE TEXTURE TO BE: NONE. 4. LL INSIDE RDII.00R. UNLESS OTHERWISE SPECIFIED. 5. LL EXTERNL DIMENSIONS FFECTED THE DRFT PPLY T THE LRGE END OF THE FETURE, ND LL INTERNL FETURES FFECTED THE DRFT PPLY T THE SMLL END OF THE FETURE UNLESS OTHERWISE SPECIFIED. 6. DEGREE DRFT IN THE DIRECTION OF PULL IS PERMISSIBLE UNLESS OTHERWISED SPECIFIED. 7. MTERIL / COLOR: BS PLSTIC IS STNDRD IN BLCK OR WHITE. CUSTOM MTERILS ND COLORS RE VILBLE UPON REQUEST FOR QUOTE. LTERNTE RESINS HVE DIFFERENT SHRINK RTES, ND WILL EFFECT DIMENSIONS. 8. PCB S RE RECOMMENDTIONS ONLY. FINL S ND VERIFICTION OF ITS FIT RE THE SOLE RESPONSIBILITY OF ECH CUSTOMER. 9. SSEMBLY SCREWS FOR THE ENCLOSURE INCLUDED. 0. THIS DRWING IS BSED ON SOLID MODEL, ND IS FURTHER DEFINED THE SOLID MODEL FILE.. LLOWBLE FLSH: 0.05 MX. 2. LL EJECTOR PIN MRKS TO BE WITHIN 0.05" OF FLUSH, PROTRUDING OR BELOW FLUSH. 3. TRIM GTE WITHIN 0.030" OF FLUSH. R E V I S I O N REV. ECO No DESCRIPTION PPROVED DR XXX PRELIMINRY RELESE 206-Oct-04 D.C. B R CRUZ UP NOTE 2, ENCLOSURE NME, & PCB SHPE 206-Oct-06 D.C. C R CRUZ DD RIBS ON BSE, REVISE PCB SHPE ND DD NOTE 206-Dec-07 D.C..0 RELESED TO MFG PER CUSTOMER 207-Feb EXPLODED VIEW ITEM _PCB_ _COVER _BSE SCREW_HILO-NO4X375 FILE NME PCB - REFERENCE COVER - STNDRD BSE - STNDRD #4 HiLo x.375" SCREW DESCRIPTION BILL OF MTERILS.062" THICK BS BS ZINK PLTED MTERIL CUSTOMER SUPPLIED BLCK or WHITE BLCK or WHITE 3/8" LONG COLOR 4 QTY. THIRD NGLE PROJECTION DO NOT DRWING NOTICE: THE INFORMTION ND DT CONTINED HEREIN IS CONSIDERED PROPRIETRY TO LLTEC INTEGRTED MFG INC & SHLL REMIN THE EXCLUSIVE PROPERTY OF LLTEC INTEGRTED MFG INC THE HOLDER WILL SSUME CUSTODY ND CONTROL THT THIS DOCUMENT WILL NOT BE COPIED, REPRODUCED, OR DISCLOSED WITHOUT THE EXPRESS WRITTEN CONSENT OF LLTEC INTEGRTED MFG INC POSSESSION OF THIS DOCUMENT DOES NOT CONSTITUTE GRNT TO MNUFCTURE NY ITEMS. 206 X.XX =.05 X.XXXX =.00 X.XXX =.00 X.X = 206-Oct Santa Fe Road San Luis Obispo, C ph. (805) fax (805) DRWING NME _R_0 OF 6.0
4 3.600 [9,44] SSEMBLY [60,96].495 CLER [2,57].020 [0,5].062 PCB [,57].073 CLER [,85] DETIL 2 R.300 [ 7,62] 3.0 DRFT TYP..800 [20,32].565 [4,35].25 [5,46].020 [0,5] [57,62] R.75 [ 4,45] SECTION - SEE DETIL.600 [40,64].745 [44,33] [7,2] X.XX =.05 X.XXXX =.00 X.XXX =.00 X.X = 206-Oct Santa Fe Road San Luis Obispo, C ph. (805) fax (805) DRWING NME _R_0 2 OF 6.0
5 .800 [ 45,72 ] C.800 [ 45,72 ] COVER.200 [ 30,48].060 [,52].05 [0,38].045 [,4].090 [2,29].060 [,52] DETIL B [ 5,88].200 [ 30,48] C R.300 [ 7,62] 3.0 DRFT [,52] [ 20,32] [89,8] DRFT/SIDE 8X.85 [4,7] SECTION C-C [58,7] DRFT/SIDE SEE DETIL B 8X [0,89].87 OD [ 4,75].072 ID [,83] [ 20,32] 2X.400 [ 35,56 ] 2X.400 [ 35,56 ] X.XX =.05 X.XXXX =.00 X.XXX =.00 X.X = 206-Oct Santa Fe Road San Luis Obispo, C ph. (805) fax (805) DRWING NME _R_0 3 OF 6.0
6 .200 [ 30,48].800 [ 45,72 ] B.800 [ 45,72 ] BSE.022 [0,56] [,02].073 [,85] DETIL D DRFT/SIDE [5,84].5 + DRFT/SIDE [2,92].200 [ 30,48] R.300 [ 7,62] B.25 [5,46].080 THICK [2,03] [58,68] DRFT/SIDE SEE DETIL D R.75 [ 4,45] R.00 [ 2,54].020 [0,5] 3.0 DRFT SECTION B-B.00 RECESS [0,25].873 [ 22,7] [ 20,32] LBEL RECESS [ 22,7] 2X.400 [ 35,56 ].34 [ 28,8 ].34 [ 28,8 ] 2X.400 [ 35,56 ] [ 20,32] X.XX =.05 X.XXXX =.00 X.XXX =.00 X.X = 206-Oct Santa Fe Road San Luis Obispo, C ph. (805) fax (805) DRWING NME _R_0 4 OF 6.0
7 .076 [ 27,32 ] [ 20,32 ] PCB mm OR.062" - CUSTOMER SUPPLIED PCB S RE RECOMMENDTIONS ONLY. FINL S ND VERIFICTION OF ITS FIT RE THE SOLE RESPONSIBILITY OF THE CUSTOMER. [ 20,32 ].076 [ 27,32 ].075 [ 27,3 ] [ 20,32 ] [ 20,32 ].075 [ 27,3 ].200 CHMFER 4x [5,08].200 CHMFER 4x [5,08].676 [ 42,56].675 [ 42,55] 2X.400 [ 35,56] 2X.400 [ 35,56] (2.800 ) [7,2] 3.35 [85,2] (2.800 ) [7,2] [85,09] 4X.95 [ 4,95] 4X.20 [ 3,05] 2X.400 [ 35,56] 2X.400 [ 35,56].676 [ 42,56] (.600 ) [40,64] 2.5 [54,64] 4X.325 [ 8,26] KEEP OUT ZONES.675 [ 42,55] (.600 ) [40,64] 2.50 [54,6] 4X.325 [ 8,26] KEEP OUT ZONES.062 [,57].039 [] NOTE: ENCLOSURE WILL COMMO EITHER mm (.039") PCB OR.062"PCB, NOT BOTH. BORDS SHOWN RE MXIMUM ENVELOPE DIMENSIONS THIS ENCLOSURE CN HOUSE. BORD ND SHPE RE UP TO THE DESIGNER'S DESGRETION S LONG S IT'S KEPT WITHIN ENVELOPE DIMENSIONS SHOWN ND PCB MOUNTING HOLE PTTERN IS MINTINED. X.XX =.05 X.XXXX =.00 X.XXX =.00 X.X = 206-Oct Santa Fe Road San Luis Obispo, C ph. (805) fax (805) DRWING NME _R_0 5 OF 6.0
8 nd OPERTION DETILS DELIVERS YOUR ENCLOSURE MRKET-REDY WITH IN-HOUSE CNC MCHINING, PD PRINTING, SSEMBLY, ND FULFILLEMENT. LL SURFCES ND RES RE VILBLE FOR CNC LTERTION CLL (805) FOR PRICING ND SCHEDULE. THE INSIDE RDIUS OF NY MCHINED FETURES SHOULD BE NO SMLLER THN.03" COVER BSE COVER - BS, BLCK STEP NO DESCRIPTION CUTTER FIXTURE ORIENTTION PROGRM -C-C - T2 =.062" EM - 2-C-C2 - T2 =.062" EM - COVER - BS, BLCK STEP NO DESCRIPTION INK COLOR CLICHE DESCRIPTION CLICHE No. 3-C-P PD PRINT CLXXXX R X.XX =.05 X.XXXX =.00 X.XXX =.00 X.X = 206-Oct Santa Fe Road San Luis Obispo, C ph. (805) fax (805) DRWING NME _R_0 6 OF 6.0
From Off-The-Shelf to Market-Ready New Age Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your
From Off-The-Shelf to Market-Ready New ge Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your end-use. visit newageenclosures.com/services or call 855-4N-ENCL
More informationFast and Affordable Customization.
4330 Santa Fe Road San Luis Obispo, CA 9340 T 805.595.30 F 805.595.024 www.newageenclosures.com Fast and Affordable Customization. Ordering a market-ready enclosure is made fast and affordable with our
More informationNOTE: UNLESS OTHERWISE SPECIFIED. 1. SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING
DESCRIPTION ISION DTE EDITED BY ECO# D UPDTED BOM ISIONS, REMOVED PGE 3 04/24/2014 TS 00649 E UPDTED BOM ISION 10/09/2014 00663 F UPDTED BOM ISIONS 11/24/2014 00673 1 2 3 1. SEE SHIPPING INSTRUCTIONS FOR
More informationNOTE: UNLESS OTHERWISE SPECIFIED. 1. SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING
DESCRIPTION ISION DTE EDITED BY ECO# D UPDTED BOM ISIONS, REMOVED PGE 3 04/24/2014 TS 00649 E UPDTED BOM ISION 10/09/2014 00663 F UPDTED BOM ISIONS 11/24/2014 00673 1 3 2 4 5 1. SEE SHIPPING INSTRUCTIONS
More informationNOTE: UNLESS OTHERWISE SPECIFIED. 1. SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING
ISION DESCRIPTION DTE EDITED BY ECO# PRODUCTION RELESE, DERIVED FROM 56076 08//0 0066. SEE SHIPPING INSTRUCTIONS FOR FINL PCKGING ITEM NO PRT NUMBER DESCRIPTION QTY 550 HDS-LSX LIFT SUPERSTRUCTURE 5509
More information* TURNING SPACE ROLLED CURB SIDEWALK RAMP TYPE R (ROLLED SIDES) * TURNING SPACE ** RAMP
* MXIMUM TURNING SPCE IS 2.0% IN ECH DIRECTION OF TRVEL. MINIMUM DIMENSIONS 5' x 5'. SEE NOTES. ** MXIMUM RMP CROSS IS 2.0%, RUNNING 5% - 7% (8.3% MXIMUM). SEE NOTES. "NON-WLKING" RE * TURNING SPCE 24"
More informationXPR10A. BendPakSKU
Ser vi cemanual S er vi cepar t s& Di agr ams T hi sgui dei sat r oubl es hoot i ngr ef er enceus edf ormai nt ai ni ngands er vi ci ngyour BendPakpr oduct.i tpr ovi descompr ehens i vei nf or mat i ononi
More informationDRAWING TABLE SYSTEM
DRWING TBLE SYSTEM DT31, DT61S, & CDTC71 MODEL VIEWS MY NOT REPRESENT EXCT MODEL PURCHSED : : CRETED NME THIS DRWING IS THE SOLE PROPERTY OF DIVERSIFIED WOOD CRFTS. IT MY NOT BE LTERED OR CHNGED WITHOUT
More informationUltimate Trilennium Astragal Prehanger Installation Instructions
Ultimte Trilennium Astrgl Prehnger Instlltion Instructions Tools Required: Flthed Screwdriver Shers Phillips Screwdriver Power Drill with 1" Drill Bit Tpe Mesure 1" Spde Bit Kit Includes: Full Astrgl Full
More informationMAYWOOD. Hospitality & ConferenCe tables FURNITURE CORP. GSA Approved! Contract #GS-28F-0050W. Established 1918
MAYWOOD FURNITURE CORP. Mnufctured in the U.S.A. Estblished 1918 Hospitlity & ConferenCe tbles www.mywood.com GSA Approved! Contrct #GS-28F-0050W bout us Circ 1930 Mywood Furniture Corportion ws estblished
More informationT6-200 THERMAL IMAGING SYSTEM
T6-200 THERML IMGING SYSTEM INSTLLTION GUIDE This document is intended for authorized dealers and installers to review for the purposes of offering greater clarification of the T6-200 Thermal Imaging System
More informationNORTH STAR 2-PANEL PATIO DOOR ASSEMBLY INSTRUCTIONS
40684 Talbot Line, St. Thomas, Ont., N5P 3T2 Phone: (59) 637-7899 Toll Free: (800) 265-570 Fax: (59) 637-3403 Web Site: www.northstarwindows.com NORTH STR 2-PNEL PTIO DOOR SSEMBLY INSTRUCTIONS I:\PDssembly\2Panel\CovPg.doc
More informationSPECIFICATION OUTLINE
ISIONS ECO DESCRIPTION DTE BY 001 5340 PRODUCTION RELESE 4/23/09 GF 002 5541 OMIT GREEN e MRK DD ORNGE 50 MRK DD WWW.SUREPOWER.COM LOGO TO PRODUCT LBEL 11/19/09 JT 5627 OMIT PRODUCT ND SERIL NUMBER LBEL
More informationJ. Colville
ITEM NO. SQ-00 PRT NUMBER DESCRIPTION End Tube Clamp - Lower Vendor QTY. 2 2 SQ-002 End Tube Clamp - Upper 2 SQ-00 Modified luminum Straw ilikethatsticker.com 5 SQ-00 DJI NZ-M Lite Motor Mount Rev B Flight
More informationFirst Round Solutions Grades 4, 5, and 6
First Round Solutions Grdes 4, 5, nd 1) There re four bsic rectngles not mde up of smller ones There re three more rectngles mde up of two smller ones ech, two rectngles mde up of three smller ones ech,
More informationTTRM MHZ 16W BI-DIRECTIONAL AMPLIFIER
TTRM08 700-800MHZ 6W BI-DIRECTIONL MPLIFIER DESCRIPTION This class Gas module is designed for both military and commercial applications. It is capable of supporting any signal type and modulation format,
More informationSPECIFICATION OUTLINE
ISIONS ECO DESCRIPTION DTE BY 003 5340 DD SPECIFICTION FOR THERML CYCLE ND THERML SHOCK DD e11 03 4947 COMPLINCE MRK DD WEIGHT 4/23/09 GF 004 5465 OMIT GREEN e MRK DD ORNGE 50 MRK DD WWW.SUREPOWER.COM
More information3M TM PIN STRIP HEADER, 951 SERIES 2MM AND 2MM X 2MM STRAIGHT, RIGHT ANGLE AND SURFACE MOUNT, SOLDER TAIL
M TM PIN STRIP HEER, 9 SERIES MM N MM X MM STRIGHT, RIGHT NGLE N SURFE MOUNT, SOLER TIL. REGULTORY INFORMTION: VISIT M.com/regs OR ONTT YOUR M REPRESENTTIVE TO FIN THE RoHS OMPLINE STTUS THE M PRT YOU
More informationTTRM1004-D MHZ 25W BI-DIRECTIONAL AMPLIFIER
TTRM00-D0 00-500MHZ 5W BI-DIRECTIONL MPLIFIER DESCRIPTION This class B LDMOS module is designed for both military and commercial applications. It is capable of supporting any signal type and modulation
More informationPower rating at 80 C watts R0005 ohms R0006 to R01. R001 to R01 Power. to R015. (mω) 1 0.2, 0.25, 0.3, 0.
Resistors Metl Strip Current Sense Resistors Surfce Mount Resistors Metl Element Current Metl Element Sense Resistor UR Series UR Current Series Sense Resistor Resistnce R000 (m ) to R0 (m ) Metl UR Robust
More informationINSTALLATION GUIDE SPACE SAVER PARTITION CURRENT F DOOR. pro-gard.com STRONG RELIABLE SECURE
INSTLLTION GUIDE SPE SVER PRTITION 0 - URRENT F-0 - DOOR STRONG RELILE SEURE pro-gard.com.0.0 THESE OMPONENTS RE REQUIRED TO INSTLL THE PRTITION PRTS LIST REV SHEET UTHOR DTE QTY PRT NUMER X /-0 x / RRIGE
More informationAngle in Degrees. IMS 17mm (A & B) IMS 20mm IMS 27mm
VILLE THROUGH 400 andela VS ngle 00 000 800 600 400 andela 00 0 - -8-5 - -9-6 -3 0 3 6 9 5 8 ngle in Degrees IMS 7mm ( & ) IMS 0mm IMS 7mm Due to the variable nature of LED output and evolvement in technology,
More informationOptions. Exposed Ends (EXP) Flush Ends (FL) Flush Unexposed Ends (FUE) Cabinet Systems Winter
Exposed Ends (EXP) Mtching specie veneer on 1/2" thick cbinet sides. Avilble in both Advntge nd Essence lines. Specify: L (Left), R (Right) or B (Both). 1/4" revel from edge of front frme to surfce of
More informationIIHS LATCH Measurement Tool Set Drawings REV1. iihs.org
IIHS LTCH Measurement Tool Set Drawings REV1 iihs.org REV. DESCRIPTION DTE BY DD STORGE CSE. CHNGE IIHS LOGO. 2/1/2017 RGJ LTCH FORCE TOOL WITH DEPTH SHIELD SHEET 3-4, 9 WGNER INSTRUMENTS FDX100 WWW.WGNERINSTRUMEMTS.COM
More informationPB-735 HD DP. Industrial Line. Automatic punch and bind machine for books and calendars
PB-735 HD DP Automtic punch nd bind mchine for books nd clendrs A further step for the utomtion of double loop binding. A clever nd flexible mchine ble to punch nd bind in line up to 9/16. Using the best
More informationTTRM MHZ 20W BI- DIRECTIONAL AMPLIFIER
TTRM00 800-000MHZ 0W BI- DIRECTIONL MPLIFIER DESCRIPTION This class B LDMOS module is designed for both military and commercial applications. It is capable of supporting any signal type and modulation
More informationTTRM MHZ 100W BI-DIRECTIONAL AMPLIFIER
TTRM096 00-00MHZ 00W BI-DIRECTIONL MPLIFIER DESCRIPTION This class B LDMOS module is designed for both military and commercial applications. It is capable of supporting any signal type and modulation format,
More informationSPECIFICATION OUTLINE
ECO DESCRIPTION DTE BY 001 5479 PRODUCTION RELESE 10/02/2009 GF 5663 OMIT PRODUCT ND SERIL NUMBER LBEL DETIL REPLCE PPROPRITE SE REFERENCES WITH ISO REFERENCES ENHNCE REGULTORY REQUIREMENTS TBLE 5/26/2010
More informationMEAM 150. Fundamentals of Mechanical Prototyping. Introduction Drawings Tolerances. 2009, Jonathan Fiene, University of Pennsylvania
MEM 150 Fundamentals of Mechanical Prototyping Introduction Drawings Tolerances 1 Introduction 2 objectives learn to safely use standard manufacturing tools band saw hand tools drill press lathe mill cnc
More informationRectangular type APS-10 to 15 Series
Rectngulr type APS- to 15 Series From n ultr-thin design to n operting distnce of 15 mm, wide-rnging rectngulr types re vilble to meet diversified requirements. Types output type/dc 3-wire type Shpe Operting
More information1, 1.5, 2, 2.5, , 0.75, 1, 1.5, , 3, , 4.5, 5, 5.5, , 4.5, 0.5, 5, , , 6.
Resistors Metl Strip Current Sense Resistors Surfce Mount Metl Strip Current Sense Resistors Surfce Mount Metl Element Current Metl Resistors Element UR Series UR Series Current Metl Resistor Element Resistnce
More informationStandards for Working Drawings
Standards for Working Drawings 11 September 2006 Department of Mechanical Engineering, Mechatronic Engineering, and Manufacturing Technology California State University, Chico Chico, California 95929-078
More informationSeven Sisters. Visit for video tutorials
Seven Sisters This imge is from www.quiltstudy.org. Plese visit this website for more informtion on Seven Sisters quilt ptterns. Visit www.blocloc.com for video tutorils 1 The Seven Sisters design cn be
More informationGeneral Instructions 03HEL1010DDFW-V3. Please retain product label and instructions for future reference. 10x10 Helios Summer House
Generl Instructions Plese retin product lel nd instructions for future reference 03HEL1010DDFW-V3 x2 All uilding s should e erected y two dults Winter = High Moisture = Expnsion Summer = Low Moisture =
More informationLarge Commercial Trunking
Lrge Commercil Trunking 3.2 CONTENTS Lrge Commercil SIGNO BK - PVC-U...................3.7 Trunking 110x70 to 220x70mm SIGNO BA - Aluminium............... 3.13 110x70 to 220x70mm SIGNO BS - Steel...................
More informationSHEET 1 OF 5 REVISIONS SYS DESCRIPTION DATE APPROV SPRING CUP STUD TOLERANCES ON DIMENSIONS UNLESS OTHERWISE SPECFIED X = 2 X/X = 1/32 PART NO.
C3501-241659 E SHEET 1 OF 5 SYS DESCRIPTION PPROV.375 + -.008.002 SPRING CUP STUD.050.281 MIN..215 -.000.003.255 ±.002.050 SLOT DEPTH W/ 1.375 R. NOTES: 1. STUD -.I.S.I. 4037, C1118, C1117, OR 8620 STEEL.
More informationUNIFORM STANDARD DRAWINGS CLARK COUNTY AREA, NEVADA YEAR 2017 REVISIONS
UNIFORM STNDRD DRWINGS CLRK COUNTY RE, NEVD YER 2017 REVISIONS DWG NO. TITLE ND REVISIONS SUMMRY EFFECTIVE DTE 206.S1 Local Residential Urban rea Street Sections 1/1/2017 Drawing revised to prohibit the
More informationCrime Scene Documentation. Crime Scene Documentation. Taking the C.S. What should my notes include. Note Taking 9/26/2013
Crime Scene Documenttion Crime Scene Documenttion Most importnt step in C.S. processing Purpose: permnently record the condition of C.S. & physicl evidence Time consuming Documenter must be orgnized nd
More informationLORING THE SMARTER WAY TO ROAST PROPRIETARY ITEM:
TLE, MXIMUM WEIGHTS, L (KG) ROSTER (9) JOS TUING + (9.) GREEN EN RT + (.) EXHUST STK VENT UTO HOPPER.9.. 9.. ZONE TRIER UTO ISHRGE OOR PPROVE J HUTTON. 0....0 9. WLL TO. 0..0 0. REOMMENE LERNE.0. REOMMENE
More informationTubing Spacers. Backing Plate. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a a. a a. a a
Grnd Slm Instlltion Instructions TACO Metls Inc., 98 NE 179th Street Mimi, Florid 33162 hndyhnk@tcomrine.com tcomrine.com This Box Contins: 1- Port side Grnd Slm 1- Strbord side Grnd Slm 4-5/16 x 1 stinless
More informationPROGRAMMING MANUAL MTMA/01 MTMV/01 FB00329-EN
RMMING MNUL MTM/01 MTMV/01 FB00329-EN Generl precutions Red the instructions crefully efore eginning the instlltion nd crry out the ctions s specified y the mnufcturer. The instlltion, progrmming, commissioning
More informationNOTE THAT THE HANDLE IS BELOW THE LOCK BASE
NOTE THT THE POSITION OF STOP IS LOCTED USING THE SINGLE HOLE S PLCEMENT GUIDE. NOTE THT THE HNDLE IS ELOW THE LOCK SE DETIL G SCLE.5. OF CHNGE DTE SIGN RELESED FOR PRODUCTION // RQ G SEE SHEET 3 FOR P/N
More informationArray chip resistors size ARC241/ARC242 ARV241/ARV242
Arry chip resistors FEATURES 4 0603 sized resistors in one 1206-sized pckge Reduced reel exchnge time Low ssembly costs Reduced PCB re Reduced size of finl equipment Higher component nd equipment relibility.
More informationAPPLICATION MANUAL. application manual >> ARMA-CHEK R. application manual
APPLICATION MANUAL R ppliction mnul >> ARMA-CHEK R ppliction mnul R R APPLICATION MANUAL 1 GENERAL 3» Working with Arm-Chek R 3» Tools for instlling Arm-Chek R 3» Correct use of Armflex dhesive 4» Applying
More informationASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS Multi Line 6 x8 255x193x203cm / 100 1 /2 x76 x80 Poly-Tex, Inc. PO Box 458 27725 Dnville Avenue Cstle Rock, MN 55010 We Site: www.poly-tex.com English - 69717 Hoy Greenhouse Service
More informationExtremely small "footprint" and the highest circuit density available AK550. Front Wire Entry
FIXED PRINTED CIRCUIT Tubulr Screw Clmp For use when stndrd size printed circuit terminl blocks re too lrge for vilble spce or where very smll circuit bord is utilized. Our new subminiture design offers
More informationDRAWER BASE DRAWING TABLE
MODEL VIEWS MY NOT REPRESENT EXCT MODEL PURCHSED B UPD STEP 1 NME ECN NO. : : : DIMENSION RE IN INCHES 1 OF 10 K:\DIVERSIFIED\\CD\.dwg, 9/25/2018 9:04:08 M, DWG To PDF.pc3 TOOLS REQUIRED 1 2 " WRENCH 1
More informationCS 135: Computer Architecture I. Boolean Algebra. Basic Logic Gates
Bsic Logic Gtes : Computer Architecture I Boolen Algebr Instructor: Prof. Bhgi Nrhri Dept. of Computer Science Course URL: www.ses.gwu.edu/~bhgiweb/cs35/ Digitl Logic Circuits We sw how we cn build the
More informationMODEL 351 POWERGLIDE SERIES INSTRUCTIONS FOR INSTALLING SARGENT DOOR CLOSERS WITH "H" HOLDER ARMS
MODEL POWERGLIDE SERIES INSTRUTIONS FOR INSTLLING SRGENT LOSERS WITH "H" HOLDER S SERIES NON SIZED DJUSTLE SIZES THRU 6 UTION: FILURE TO INSTLL OR DJUST PROPERLY MY RESULT IN INJURY OR DMGE. FOR SSISTNE,
More informationPreliminary. Datasheet
Features/Benefits IP68 sealed to endure harsh environments,000,000 life cycle Longer solder leads for ease of wire installation Multiple housing styles Up to 5 resistive load Wirelead options available
More information001CK CK0012 FR-001CK0013 FR EN English
AUDIO ENTRY KIT FA00959EN 001DC00AC 001DC0EARY 7 10 001CS1PLCO INSTALLATION MANUAL 001CK0009 001CK001 FR001CK0013 FR EN English Generl Notes A Red the instructions crefully before beginning the instlltion
More informationExperiment 3: Non-Ideal Operational Amplifiers
Experiment 3: Non-Idel Opertionl Amplifiers Fll 2009 Equivlent Circuits The bsic ssumptions for n idel opertionl mplifier re n infinite differentil gin ( d ), n infinite input resistnce (R i ), zero output
More informationSPECIAL EDITION. Spring 2012 Ezine. where crafty is contagious
Spring 2012 Ezine SPECIAL EDITION www.clubchiccircle.com where crfty is contgious shmrock sttionery It is so esy to mke these festive homemde crds! Mke homemde stmp from the end of n pencil erser. With
More informationTP Series - Triple PV Top of Pole Solar LED Lighting System
TP Series - Triple PV Top of Pole Solr LED Lighting System Instlltion Mnul MKTG-TP34-02-EN-1113 Instlltion Mnul TP Series Importnt Notes nd Wrnings This instlltion nd instruction mnul provides instlltion
More informationNORTH STAR 4-PANEL PATIO DOOR ASSEMBLY INSTRUCTIONS
40684 Talbot Line, St. Thomas, Ont., N5P 3T Phone: (519) 637-7899 Toll Free: (800) 65-5701 Fax: (519) 637-3403 Web Site: www.northstarwindows.com NORTH STR 4-PNEL PTIO DOOR SSEMLY INSTRUCTIONS (JN/P-Dr04/4Panssy
More informationSynchronous Machine Parameter Measurement
Synchronous Mchine Prmeter Mesurement 1 Synchronous Mchine Prmeter Mesurement Introduction Wound field synchronous mchines re mostly used for power genertion but lso re well suited for motor pplictions
More informationUltimate Push Button Astragal Prehanger Installation Instructions
Ultimte Push Button Astrgl Prehnger Instlltion Instructions Tools Required: Flthed Screwdriver Shers Phillips Screwdriver Power Drill with 1" Drill Bit Tpe Mesure Kit Includes: Full Astrgl Full Length
More informationMFAH. Minimizes Burrs for High Quality Machining Results. Low Cutting Force Design
igh fficiency Milling Cutter for Finishing Aluminum MFA igh fficiency Milling Cutter for Finishing Aluminum MFA NW CG Imge Low Cutting Force Minimizes Burrs nd Chipping for igh Qulity Mchining Results
More informationInnovative plate solutions for flexographic printing. nyloflex printing plates
Innovtive plte solutions for flexogrphic printing nyloflex printing pltes nyloflex Printing Pltes Unique nd comprehensive expertise in flexogrphic printing Printing pltes from Flint Group to meet every
More informationCanopy Bed Frame. Date: 8 Jun 15 www. potterybarn.com Page 1 of 12 Rev:
Cnopy Bed Frme Dte: 8 un 15 www. potterybrn.com Pge 1 of 12 Importnt Sfety Instructions: WARNIN: Do not llow children to climb on, pull on, or hng from cnopy. Filure to follow these instructions cn result
More informationMSC Studentenwettbewerb. Wintersemester 2012/13. Marc/Mentat 2012
MSC Studentenwettewer Wintersemester 2012/13 Mrc/Mentt 2012 Aufge Wie groß ist die mximle Verschieung in Y Richtung im nichtlineren Fll? Required File: tip_lod.mud. 2 TUTORIAL Prolem Description In this
More informationRegular InGaAs Photodiodes IG17-Series
Description The IG7series is pnchromtic PIN photodiode with nominl wvelength cutoff t.7 µm. This series hs been designed for demnding spectroscopic nd rdiometric pplictions. It offers excellent shunt resistnce
More informationThree-Phase Synchronous Machines The synchronous machine can be used to operate as: 1. Synchronous motors 2. Synchronous generators (Alternator)
Three-Phse Synchronous Mchines The synchronous mchine cn be used to operte s: 1. Synchronous motors 2. Synchronous genertors (Alterntor) Synchronous genertor is lso referred to s lterntor since it genertes
More informationPIN 2 NOMINAL SIGNAL OUTPUT CURVE (THROUGH REFERENCE POINTS "A" AND "B") PIN 4 NOMINAL SIGNAL OUTPUT CURVE (THROUGH REFERENCE POINTS "C" AND "D")
FO-55117-B 8 7 6 5 4 3 2 1 HONEYWELL PRT NUMBER SPS-100D-HMS SENSOR OUTPUT PERFORMNCE CHRT REF POINT "C" REF POINT "B" REV DOCUMENT CHNGED BY CHECK E 0076277 MBN 11PR11 DSK F 4.75 4.5 LINERITY #0.4% OF
More informationHarmer Roof Drainage The Modulock Raised Deck Support Ranges
Modulock Rised Deck Supports - Introduction Hrmer Roof Dringe The Modulock Rised Deck Support Rnges Fully engineered, verstile, rised deck product rnges, Modulock Pedestl nd Modulock Uni-Ring, re idel
More informationExperiment 3: Non-Ideal Operational Amplifiers
Experiment 3: Non-Idel Opertionl Amplifiers 9/11/06 Equivlent Circuits The bsic ssumptions for n idel opertionl mplifier re n infinite differentil gin ( d ), n infinite input resistnce (R i ), zero output
More informationEE Controls Lab #2: Implementing State-Transition Logic on a PLC
Objective: EE 44 - Controls Lb #2: Implementing Stte-rnsition Logic on PLC ssuming tht speed is not of essence, PLC's cn be used to implement stte trnsition logic. he dvntge of using PLC over using hrdwre
More information* * 33/3549A CS 33/3549A. 2-Point Latch includes these additional parts. 1-Point Latch (LBL) Customer Service. Installation Instructions
*23970726* 23970726 33/3549A CS 33/3549A Instlltion Instructions This instruction covers new instlltion of the 33/3549A conceled verticl device for luminum nd hollow metl doors. RF Also covered is the
More informationWulfsberg Electronics Division A Chelton Group Company RESOLVING RADIO INTERFERANCE PROBLEMS REVISIONS 7/7/98.
REV PPROVLS DTE REVISIONS SH 1 DRWN CHECKED Robert DeLong Steve Elliott 7/7/98 7/7/98 REV DESCRIPTION DTE PPROVED INITIL RELESE ENGINEER Robert DeLong 7/7/98 150-040051 ISSUED Steve Elliott 7/7/98 DOC
More informationAlgorithms for Memory Hierarchies Lecture 14
Algorithms for emory Hierrchies Lecture 4 Lecturer: Nodri Sitchinv Scribe: ichel Hmnn Prllelism nd Cche Obliviousness The combintion of prllelism nd cche obliviousness is n ongoing topic of reserch, in
More informationLORING THE SMARTER WAY TO ROAST PROPRIETARY ITEM:
TLE, MXIMUM WEIGHTS, L (KG) ROSTER (.) JOS TUING +. (.) ZONE.. 9.. 0.. 9. WLL TO L 0F STK 9.9 MINIMUM ROSTER LERNES R9.. ELETRIL ENLOSURE OOR OPENING EXHUST VENT JOS TUING EN ISION HISTORY ESRIPTION INITIL
More informationOn/off valves with spool position monitoring
On/off vlves with spool position monitoring RE 2483/2. Replces: 3.8 /3 Tble of contents Contents Pge Generl 2 Directionl set vlve type SED 3 Directionl set vlve type SEW 4 Directionl set vlve type SH,
More informationStudent Book SERIES. Patterns and Algebra. Name
E Student Book 3 + 7 5 + 5 Nme Contents Series E Topic Ptterns nd functions (pp. ) identifying nd creting ptterns skip counting completing nd descriing ptterns predicting repeting ptterns predicting growing
More informationGXR-GPS GXR-GPS-485 User Manual
GXR-GPS GXR-GPS-485 User Mnul GeoSIG Ltd, Ahornweg 5A, 5504 Othmrsingen, Switzerlnd Phone: + 41 44 810 2150, Fx: + 41 44 810 2350 info@geosig.com, www.geosig.com GeoSIG Ltd GS_GXR_GPS_User_Mnul_V03.doc
More informationTOOLS NEWS CRN ENDMILL FOR COPPER ELECTRODE
TOOLS NEWS CN ENDMILL FO COPPE ELECTODE 007. Updte B00G Series expnsion, Corner dius type now included! A gret vriety of products. Totl sizes of 0 in 7 series. Copper Electrode End Mill Series CN Series
More informationNo screws, no glue just add your Raspberry Pi filling!
RSPERRY PI STYLE ENCLOSURES No screws, no glue just add your Raspberry Pi filling! Designed to house the Raspberry Pi via clip-in grooves - NO SCREWS REQUIRED! ll cut-outs are pre-cut into the case - NO
More informationPacking List MODEL TEL-IAL-481 For Inactive Leaf TRIDENT double door
Items: SECURITECH GROUP, INC. MP uxiliary POLICE LOCK Packing List MODEL TEL-IL-481 For Inactive Leaf TRIDENT double door Items with * are pre-installed or assembled Fasteners: Part# Qty Name Description/Usage
More informationSTRADA_ 6x 2_IP_ Modular Asymmetric Lens
STRD_ 6x _IP_ Modular symmetric Lens REE: XP-G, XT-E OSRM: OSLN SQURE P LUMILEDS: Rebel R, Rebel ES Efficiency 9% IP 67 S86_STRD_IP_x6_DW PRESS RELESE Precision moulded silicone gasket for IP67 rating
More informationNC7WZ17 TinyLogic UHS Dual Buffer with Schmitt Trigger Inputs
January 2012 NC7WZ17 TinyLogic UHS Dual Buffer with Schmitt Trigger Inputs Features Ultra-High Speed: t PD 3.6ns (Typical) into 50pF at 5 CC High Output Drive: ±24m at 3 CC Broad CC Operating Range: 1.65
More informationECE 274 Digital Logic Fall 2009 Digital Design
igitl Logic ll igitl esign MW -:PM, IL Romn Lysecky, rlysecky@ece.rizon.edu http://www.ece.rizon.edu/~ece hpter : Introduction Slides to ccompny the textbook igitl esign, irst dition, by rnk Vhid, John
More informationCOUNT ON ME SENIOR DESIGN EXECUTIVE SUMMARY. Josh Cosper, Randy Robert, Mark Thompson, Lorelle Paulozzi, Wesley Graham
COUNT ON ME SENIOR DESIGN EXECUTIVE SUMMRY Josh Cosper, Randy Robert, Mark Thompson, Lorelle Paulozzi, Wesley Graham bstract: Team Count on ME worked with Tri-State Industries, a company that employs individuals
More informationEngineer-to-Engineer Note
Engineer-to-Engineer Note EE-297 Technicl notes on using Anlog Devices DSPs, processors nd development tools Visit our Web resources http://www.nlog.com/ee-notes nd http://www.nlog.com/processors or e-mil
More informationFOR DEVICES SOLD PRIOR TO
23970734 98/9949 CS 98/9949 FOR DEVICES SOLD PRIOR TO 8-10-16 This instruction covers new instlltion of the 98/9949 conceled verticl device for hollow metl nd luminum doors. RF Instlltion Instructions
More informationDIN C-FORM & R-FORM PLUG, DIN SERIES VERTICAL, RIGHT ANGLE, SOLDER TAIL OR PRESS-FIT TERMINATION,.100" BACKPLANE REAR PLUG 3M TM
M TM IN -FORM & R-FORM PLUG, IN SERIES VERTIL, RIGHT NGLE, SOLER TIL TERMINTION, " KPLNE RER PLUG. TES REGULTORY INFORMTION: VISIT M.com/regs OR ONTT YOUR M REPRESENTTIVE TO FIN THE RoHS OMPLINE STTUS
More informationLecture 20. Intro to line integrals. Dan Nichols MATH 233, Spring 2018 University of Massachusetts.
Lecture 2 Intro to line integrls Dn Nichols nichols@mth.umss.edu MATH 233, Spring 218 University of Msschusetts April 12, 218 (2) onservtive vector fields We wnt to determine if F P (x, y), Q(x, y) is
More informationSeries AE W PFC INDUSTRIAL POWER SUPPLY
FEATURES Progrmmle output voltge (0%~05%) Progrmmle output current (0%~05%) Universl AC input / Full rnge Constnt current limiting Optionl glol control vi RS3 Selectle +5V / 0.5A or +9V / 0.3A uxiliry
More informationstanchion paper roll mandrel base FIGURE P3-12 ramp
1 MCHINE DESIGN - n Integrted pproch stnchion pper ro mndre se FIGURE -1 roem -7 rmp FIGURE -1 roem -8 1-ft grid -0 Run the computer mode CSE for Cse Study (on the CD-ROM in sever nguges) nd move the point
More informationSAMPLING S Y S T E M S. w w w. s a m p l i n g. c o m. Label Solutions. Labels for Production and Quality Control use
w w w. s m p l i n g. c o m Lbel Solutions 2017 Lbels for Production nd use SYSTEMS Which type lbel is right for me? Smpling Systems fer two types stndrd lbel bcking: Ultr Ahesive Lbels PhrmLbels 1. Ultr
More informationUltra Low Cost ACCELEROMETER
Chip Scle Pckged Digitl Therml Orienttion Sensing Accelerometer MXC6226XC Document Version D Pge 1 of 13 Fetures Generl Description Fully Integrted Therml Accelerometer X/Y Axis, 8 bit, Accelertion A/D
More informationWETROOM WALK-IN AWL1500 AWL1200 AWL900 AWC850
WETROOM WALK-IN AWL500 AWL00 AWL900 AWC850 INSTALLATION PARTS LIST MODEL: AWL500 AWL00 AWL 900 MODEL: AWL500 + AWC850 AWL00 + AWC850 AWL 900 + AWC850 03 AF /6 IMPORTANT Before disposing of crton nd/or
More informationExtended InGaAs Photodiodes IG26-Series
Description The IG26series is pnchromtic PIN photodiode with nominl wvelength cutoff t 2.6 µm. This series hs been designed for demnding spectroscopic nd rdiometric pplictions. It offers excellent shunt
More informationASSEMBLY INSTRUCTIONS 5PC Storage Dining Set
ASSEMLY INSTRUTIONS 5P Storge Dining Set Sers Stock # 56170 VL Stock #07-2204 U S T O M E R S E R V I E I N F O R M AT I O N Victory Lnd Group, Inc 1350 Munger Rd rtlett, IL 60103 WE: http://www.victorylndgroup.com
More informationUPTOWN CANOPY FRAME T/F/Q
UPTOWN CANOPY FRAM T/F/Q Dte: 30 Mr 16 www.pbteen.com Pge 1 of 12 mportnt Sfety nstructions: Plese red ll instructions crefully before ssembling. For your sfety, ssembly by two or more dults is strongly
More informationV DC 4 POLE RELAY RC V DC 4 POLE RELAY (RC) V AC 4 POLE RELAY
DT SHEET Plug-in power relays Order code Manufacturer code Description -.. V DC POLE RELY RC -.. V DC POLE RELY (RC) -.. V C POLE RELY Plug-in power relays The enclosed information is believed to be correct,
More informationUltimate Flip Lever Astragal Prehanger Installation Instructions
Ultimte Flip Lever Astrgl Prehnger Instlltion Instructions Tools Required: Flthed Screwdriver Shers Phillips Screwdriver Tpe Mesure Kit Includes: Full Astrgl Full Length Trim Strip Screw Pck Field Pck
More informationAssembly Drawing Organization and Dimensioning
ssembly Drawing Organization and Dimensioning This document explains the proper process for organizing and dimensioning the assembly drawings created for DR3. Report Organization The following graphic
More informationEDUCATION GRADE 12 JUNE EXAMINATION 2013 UMLAZI / ILEMBE / UGU ENGINEERING GRAPHICS AND DESIGN PAPER 1 MANUFACTURING ENGINEERING & TECHNOLOGY
ENGINEERING GRPHICS ND DESIGN GRDE 12 JUNE 201 INSTRUCTIONS ND INFORMTION GRDE 12 EDUCTION UMLZI / ILEMBE / UGU MNUFCTURING ENGINEERING & TECHNOLOGY 1. The question paper consists of THREE questions. 2.
More informationRemoteTeller SYSTEM - RTS VAT 21 GX CUSTOMER UNIT COMPONENTS CUSTOM DESIGNED CUSTOMER AREA
SEND SEND CLL CLL L " LCD COLOR MONITOR 4-29- COLOR CCD CMER 4-29- 486G VT 2 GX CUSTOMER UNIT CLL -8-999-6 LISTINGS ND PPROVLS CLSSIFIED TO UL 4R SFETY OF INFORMTION TECHNOLOGY EQUIPMENT UL TESTED TO THE
More informationSafety Relay Unit. Main contacts Auxiliary contact Number of input channels Rated voltage Model Category. possible 24 VAC/VDC G9SA-501.
Sfety Rely Unit The Series Offers Complete Line-up of Compct Units. Four kinds of -mm wide Units re ville: A -pole model, -pole model, nd models with poles nd OFF-dely poles, s well s Two-hnd ler. Simple
More informationModule 9. DC Machines. Version 2 EE IIT, Kharagpur
Module 9 DC Mchines Version EE IIT, Khrgpur esson 40 osses, Efficiency nd Testing of D.C. Mchines Version EE IIT, Khrgpur Contents 40 osses, efficiency nd testing of D.C. mchines (esson-40) 4 40.1 Gols
More information