Packing List MODEL TEL-IAL-481 For Inactive Leaf TRIDENT double door

Size: px
Start display at page:

Download "Packing List MODEL TEL-IAL-481 For Inactive Leaf TRIDENT double door"

Transcription

1 Items: SECURITECH GROUP, INC. MP uxiliary POLICE LOCK Packing List MODEL TEL-IL-481 For Inactive Leaf TRIDENT double door Items with * are pre-installed or assembled Fasteners: Part# Qty Name Description/Usage Part# Qty Name Lock Mechanism V Mechanism With djusted Mounting Plate 4 Self-Drilling Screws to mount plate *1 Cover 4 Phillips Head Cover Screws # One Of The Following Options TEL-RC2 *1 Cylinder, Removable Core Key function in lieu of Turn Piece FLSE 2 Key for Function RC2 only # TEL-TT1 *1 Thumbturn Turn Piece operation FLSE 1 Change key # FLSE # Vertical Bolts URB Upper Rod ssembly Including: for standard 7' doors *2 "K" locknuts 1 Channel-37-1/2" luminum channel 1 Rod-33-1/2" Threaded rod 1 Round Deadbolt-5" Stainless Steel Deadbolt LRB-40 1 Lower Rod ssembly Including: for standard 7' doors *2 "K" locknuts 1 Channel-40" luminum channel 1 Rod-36" Threaded rod 1 Round Deadbolt-5" Stainless Steel Deadbolt 4 1/4-20x2-1/2" 2 Underplates 4 corn nuts 2 Flat Thru Bolt Plates For top and bottom brackets 4 "K"-Locknuts 2 Brackets 6 Self-Drilling Hex Head Screw Frame Parts & Strikes 1 Flat Thru Bolt Plate For HSB exterior of door 2 corn nuts 1 Hinge Side Bolt surface applied on hinge edge of door 2 "K"-Locknuts PKGTEL v3.xls TEL-48# Printed 8/21/2006

2 TEL-DD Parts v6.1 TM Multi - Point Deadbolt Exit Lock TEL-DD Parts & Info TEL-DD Parts (1) 2 x 2 x ¼ x 75 luminum ngle w/ 2 Guide Pins ttached TEL-DD PRT-1 (7) 1/4-20 x 1-3/4 Carraige Bolts-Zinc (7) 5mm Hex Nut (2) Self Drilling screws (2) ¼-20x1" slotted hex washer screws (2) K lock nuts If these parts are missing use the number above to get replacements. USE METL TEMPLTE LOCTED IN TRIDENT BOX TO MRK HORIZONTL LINE CROSS BOTH DOORS T 45-½ FROM BOTTOM OF DOOR 12/16/2011 TEL-DD Parts & Info 45-½ Revised: 12/16/11 J 45-½

3 TEL-481 & th Street, Maspeth, NY (800) 622-LOCK (718) fax: (718) OR U Hinge Side Bolt PRTTEL-481_482.vsd Created: 11/23/2005 Revised:1/20/2006

4 TM TEL-IL/IT PRTS VIEW ctive leaf: ny TRIDENT Model Inactive leaf: TEL- 481 or TEL-482 PLESE OPEN LL BOXES ND CHECK PRTS ND INTEGRITY BEFORE INSTLLING Double Door ngle Iron INSTLL IN THIS ORDER 1. TEL-DD 2. TEL-481 or TEL TRIDENT Double Door ngle Iron Top of TEL-481 or 2 Mechanism is 45-1/2" from bottom of door. Please install ¼ from edge of DD bar Use the Metal template that is provided to mark holes for TEL model. 45-1/2" is a recommended height and may be adjusted as needed. 45-1/2" 45-1/2" FOR TEL-DD Models Double Door ngle Iron = DD The TEL-DD otherwise known as the double door angle iron will mount on the inactive leaf, simulating the stop for the inactive leaf. You will mount the strike plate using two pre-drilled holes on the TEL-DD. You will secure the strike plate with two machine screws and K lock washers. You will also drill holes in the TEL-DD to receive the top and bottom horizontal bolts of the TRIDENT. FOR TEL-481, TEL-482 Models The TEL-481 or TEL-482 will provide 1 bolt projection into the frame and threshold. To provide maximum security, please place the TEL-481 or TEL-482 approx ¼ away from the TEL-DD. Note: If an alarm contact is at the top of the door, you might need to move it slightly, or you might need to adjust the location of the TEL-481 or TEL-482 or the top bracket on the TEL-481 or TEL-482. FOR LL TEL Models The TRIDENT is designed for easy installation. Use the metal template to mark the holes for the active leaf. Installation should take under 2 hours but may vary depending on the condition of doors. INS TEL-IL COMPLETE V3.VSD 05/14/2010 Page th Street, Maspeth NY (718) (718)

5 TM TEL-IL/IT Installation ctive leaf: ny TRIDENT Model Inactive leaf: TEL- 481 or TEL-482 USE METL TEMPLTE LOCTED IN TRIDENT BOX TO MRK HORIZONTL LINE CROSS BOTH DOORS T 45-½" FROM BOTTOM OF DOOR TEL-DD INSTRUCTIONS REMOVE NY EXISTING LOCKS FROM DOORS. MKE SURE DOORS SWING FREELY. 1 With both doors closed, draw a line 45-1/2 from the bottom of the door on both the active and inactive doors THIS LINE MUST BE T THE SME HEIGHT ON BOTH DOORS! 2 Open the active door. Place the TEL-DD on the inactive leaf, using the two pins as positioning guides against the edge of the door. lign the upper () of the two notches with the line you drew in step 1. Trace the 7 thru-bolt holes onto the door. Hold the TEL-DD steady! Remove the TEL-DD 1 Double Door ngle Iron 3 Center punch the circles. 4 Drill 3/8 holes through the door. Start by drilling 1/8" hole and drilling up. YOUR DRILL MUST BE LEVEL T LL TIMES. You can check your holes as they should all be 12 on center. Double Door ngle Iron 7 5 Remove all burrs. 6 Install the TEL-DD using the ¼-20 hex cap nuts on the interior and carriage bolts on the exterior. 7 Install the strike plate. djust position of strike and secure strike into final position with 2 self drilling screws. 45-½ 45-½ INS TEL-IL COMPLETE V3.VSD 05/14/2010 Page 2

6 TM TEL-IL/IT Installation ctive leaf: ny TRIDENT Model Inactive leaf: TEL- 481 or TEL-482 You can move the channel as close to the alarm contact as possible - you would then install the bracket a bit below the alarm contact - this will allow you to stay as close to the edge as possible and not require rewiring the alarm contact. ¼ Gap TEL- 481 & TEL-482 INSTRUCTIONS USE TMP48-TEL-IL TO MRK HOLES. LINE TEMPLTE TOP CORNER ¼ FROM EDGE OF DOUBLE DOOR NGLE IRON BR ND LONG HORIZONTL LINE. 1 Fasten mechanism to the door with 4 sheet metal screws. 1 Double Door ngle Iron 2 lways install the bottom rod first! Remove the tape from the rod and channel. Fasten the bottom rod to the holder on the mechanism using the K-Lock Nuts. USE TWO OPEN END WRENCHES. Do not remove the rod from the channel. MKE SURE THE NUTS RE TIGHT!!! 3 Place the channel (with the rod fastened to the rod holder) over an under plate. Make sure the bolt travels through the guide in the bottom of the channel and the channel is 90 to the lock. Place the bracket over the channel and under plate. Make sure the bracket is level with the end of the channel (see Fig.1-2, bottom shown) and fasten with one hex-head self-tapping screw. Mark the two inner holes (see Fig. 1-1) where the carriage bolts will go. Drill two 1/4" holes through the door. MKE SURE THE BRCKET ND DRILL RE LEVEL. Fasten the thru bolt plate with carriage bolts from the outside of the door and fasten with two each of K lock and acorn nuts on the inside. 4 Repeat steps 2-3 for the top bolt. 45-1/2" 3 Double Door ngle Iron Exterior INNER HOLES Fig Place the cover over the mounting plate and channels. Make sure the tailpiece from the cylinder lines up with the crosshair in the turn piece apparatus. Check for smooth operation by using the key in the cylinder. Fasten the cover with four Philips screws. 6 Place a little putty on the top and bottom bolts. Close the door. Turn the cylinder or thumbturn until the bolts hit the saddle (or floor) and frame, then retract. Open the door. Using the center of the mark, drill up to a 7/8" dia. hole for the floor sleeve and top bolt. Insert the Dustproof Strike into the floor. Use an epoxy to keep in place. Fig OR 7 Close the door and draw a 4" vertical line 50" from the floor where the stop overlaps the hinge side of the door. Open door & place the hinge side bolt on the door and recess about 1/8" from the line. Mark & center punch holes. Drill up to ¼ holes through door & fasten with thru-bolt plate & carriage bolts on outside and K lock & acorn nuts on the inside. 7 Hinge Side of Door 50" Exterior Hinge Side of Door INS TEL-IL COMPLETE V3.VSD 05/14/2010 Page 3

7 1 TRIDENT INSTRUCTIONS Stand inside & close the doors; mark a vertical line () along entire length of TEL-DD. Place the metal marking template at intersection of both lines, with the labeled end at the edge of the door. Fasten template to door with screw (B). B Level template horizontally with line (C). C Mark 6 holes on lock edge. Swing down 90 and mark bottom 2 holes (D). D Swing up 90 and mark top 2 holes (E). E Make sure template is always straight with vertical reference line when marking top & bottom holes. Remove the template. Center punch and drill all holes up to 3/8" through the door. MKE SURE DRILL IS LEVEL! FILURE TO DRILL STRIGHT MY CUSE LOCK TO FUNCTION IMPROPERLY ND WILL VOID WRRNTY! TM TEL-IL/IT Installation ctive leaf: ny TRIDENT Model Inactive leaf: TEL- 481 or TEL # Exterior Key Control: Use template and mark all holes. Mark and pilot drill hole #1. If exterior trim is being installed, use trim template and separate instructions and parts list for instructions. pply & fasten the anti-pry plate with 2 allen-head T-nut cap screws. Do not tighten completely. lign the top of lock body to horizontal reference line and fasten as follows: Front Holes: 2-3/4 long carriage bolts, k-lock nuts & acorn caps Rear Holes: 2-1/2 long carriage bolts, flat washers, k-lock nuts & acorn nuts. Tighten allen-head T-nut cap screws completely. Do not compress door. Fasten top module to door with thrubolt plate and carriage bolts. Loosely fasten integral 3/16" allen nut (pre installed) with the 1-¾ carriage bolt through the thru-bolt plate (). Use 2-½ carriage bolt and k- locknut on lock edge opening (B). B Tighten nut and then tighten 5mm hex screw securely. Repeat for bottom module. 2 Exterior Of Door 3 B Of Door Install carriage bolts trough nti-pry plate CHECK FOR SMOOTH OPERTION Manual Locking Models: Push and pull paddle arm Self-Locking Models: Press trigger & push paddle arm. Make sure bolts do not extend past vertical reference line when retracted. B Pull the door closed and extend the bolts as much as possible. Keeping the door pulled against the TEL-DD, trace the outline of the top and bottom bolts (D). Center punch the points to be drilled. Drill up to 3/4 holes and remove all burrs. Paddle: Fasten the paddle to the paddle arm with small carriage bolts and nuts. Channels: Slide upper channel into lock body, center on cable. The white posts should be near the main mounting plate. Module: Place cover over module and channel. Fit extended tail into cover slot and work into position. Insert carriage bolt from exterior of door and fasten with the hex-head cap nut until secure. Repeat for lower module. Pull Handle: For TEL-100 Models Only Install pull handle on top channel approx. 8" above mounting plate using 2 self-drilling screws. Close the door and draw a 4" vertical line 50" from the floor where the stop overlaps the hinge side of the door. Place the hinge side bolt on the door and recess about 1/8" from the line. Mark & center punch holes. Drill up to ¼ holes through door & fasten with thru-bolt plate & carriage bolts on outside and K lock & acorn nuts on the inside. Drill up to a ¾ oval shape hole in the frame to accept bolt. INS TEL-IL COMPLETE V3.VSD 05/14/2010 Page Hinge Side of Door 50" Double Door ngle Iron Exterior Hinge Side of Door

8 TM 3" MP Police Lock Marking Template Template #48TEL-IL Template Place Template On The Inside Of Door 1 11/16" Hole Name Hole Size 3" Mark Centers Of Holes, B & C For Drilling B C 7/8" dia. 7/8" dia. 7/8" dia. 45-1/2" From Bottom Of Door 7/32" C 7/32" B 1 3/8" 3/8" Notes: ll holes are drilled INSIDE ONLY Note bout Templates: ny reproduction of this template, via fax, photocopy or digital transmission, renders it Not To Scale. TMP48-TEL-ILv3.vsd 11/9/05

Installation Instructions Model # TEL-100 / 200 Manual Locking or Self Locking

Installation Instructions Model # TEL-100 / 200 Manual Locking or Self Locking INSTLLTION INSTRUTIONS TL-100 / 200 GSS-oors TL 1-406-212-2334 MIL rg@gssdoors.com W www.gssdoors.com GSS oors (406) 212-2334 (406) 897-2121 rg@gssdoors.com www.gssdoors.com TM Multi-Point eadbolt Installation

More information

SECURITECH GROUP, INC. MP POLICE LOCK. MODEL 4840B-TTBG_HG-3_ or 4840B-TTBG_HG-4_. Packing List. Documentation: Items: Fasteners:

SECURITECH GROUP, INC. MP POLICE LOCK. MODEL 4840B-TTBG_HG-3_ or 4840B-TTBG_HG-4_. Packing List. Documentation: Items: Fasteners: SECURITECH GROUP, INC. MP POLICE LOCK Packing List MOEL 4840B-TTBG_HG-3_ or 4840B-TTBG_HG-4_ Items: Fasteners: Part# Qty Name escription/usage Part# Qty Name escription/usage Lock Mechanism 1 4840 Mechanism

More information

SSRLS-3 / SSRLU-3 Installation Instructions

SSRLS-3 / SSRLU-3 Installation Instructions 5mm Hex Nut Upper Telescoping hannel & Screws Packing List QTY. ITM 1 Top Telescoping hannel 1 ottom Telescoping hannel w/ self drilling screw 15" 18" 1 Top and ottom Rod with connecting arm 25-½ 2 ¼ -

More information

MP Panic Exit Police Lock. Review Of March 2004 Installation

MP Panic Exit Police Lock. Review Of March 2004 Installation MP Panic Exit Police Lock Introduction To Installing The MP4900 Panic Exit Police Lock A little bit of knowledge before getting to the door can go along way towards simplifying the installation Bob Hart

More information

ED1300/1300F SERIES CONCEALED VERTICAL ROD DEVICE INSTALLATION INSTRUCTIONS

ED1300/1300F SERIES CONCEALED VERTICAL ROD DEVICE INSTALLATION INSTRUCTIONS ED1300/1300F SERIES CONCEALED VERTICAL ROD DEVICE INSTALLATION INSTRUCTIONS Ver.2 1300 SERIES CONCEALED VERTICAL ROD DEVICE Top Strike Latch Screws Strike Screws Release Plunger Top Latch Plunger Screws

More information

CONCEALED VERTICAL ROD PANIC EXIT DEVICE

CONCEALED VERTICAL ROD PANIC EXIT DEVICE INSTALLATION INSTRUCTIONS CRL JACKSON 1085-1085P CONCEALED VERTICAL ROD PANIC EXIT DEVICE crlaurence.com Phone: (800) 421-6144 Fax: (866) 921-0531 crlaurence.com usalum.com crl-arch.com 11M0236 ORDER OF

More information

INSTALLATION INSTRUCTIONS CRL JACKSON

INSTALLATION INSTRUCTIONS CRL JACKSON INSTALLATION INSTRUCTIONS CRL JACKSON 1285 CONCEALED VERTICAL ROD PANIC EXIT DEVICE crlaurence.com Phone: (800) 421-6144 Fax: (866) 921-0531 crlaurence.com usalum.com crl-arch.com 11M0248 ORDER OF ASSEMBLY

More information

INSTRUCTIONS TS93 GSR PT RIGHT HAND ACTIVE LEFT HAND INACTIVE RIGHT HAND INACTIVE LEFT HAND ACTIVE

INSTRUCTIONS TS93 GSR PT RIGHT HAND ACTIVE LEFT HAND INACTIVE RIGHT HAND INACTIVE LEFT HAND ACTIVE INSTRUCTIONS ATTENTION!!! Before you begin, determine installation type (RIGHT HAND ACTIVE OR INACTIVE). Door coordinator suitable for door from 59 to 98 in width. Inactive door width in the case of unequal

More information

98/9927. Devices covered by these instructions: Surface Vertical Rod Exit Device

98/9927. Devices covered by these instructions: Surface Vertical Rod Exit Device 911375-00 Surface Vertical Rod Exit Device 98/9927 Installation Instructions Devices covered by these instructions: 98/9927 Surface Vertical Rod Exit Device 98/9927-F (Fire) Surface Vertical Rod Exit Device

More information

TOOLS REQUIRED Metal Wood Wood and Metal Screws. #16 Drill #12-24 Tap. 1/8 Drill

TOOLS REQUIRED Metal Wood Wood and Metal Screws. #16 Drill #12-24 Tap. 1/8 Drill DEVICES COVERED IN THIS DOCUMENT: 4700S Surface Vertical Rod Device 4700SF Fire Exit Surface Vertical Rod Device TOOLS REQUIRED Metal Wood Wood and Metal Screws Sex Bolts #7 Drill ¼ -20 Tap #16 Drill #12-24

More information

33/3527A. Devices covered by these instructions: 33/3527A-F (Fire) Surface Vertical Rod Exit Device

33/3527A. Devices covered by these instructions: 33/3527A-F (Fire) Surface Vertical Rod Exit Device *911403-00* 911403-00 Surface Vertical Rod Exit Device 33/3527A Installation Instructions Devices covered by these instructions: 33/3527A Surface Vertical Rod Exit Device 33/3527A-F (Fire) Surface Vertical

More information

INSTALLATION INSTRUCTIONS FOR VERTICAL ROD ASSEMBLY, MODEL VRA-143

INSTALLATION INSTRUCTIONS FOR VERTICAL ROD ASSEMBLY, MODEL VRA-143 INS-143/PM April 20, 2007 Detex Corp, 302 Detex Drive, New Braunfels, Texas 78130 (830)629-2900/1-800-729-3839/ FAX(830)620-6711 E-Mail: detex@detex.com Internet: www.detex.com INSTALLATION INSTRUCTIONS

More information

INSTALLATION INSTRUCTIONS CRL JACKSON

INSTALLATION INSTRUCTIONS CRL JACKSON INSTALLATION INSTRUCTIONS CRL JACKSON 2085 CONCEALED VERTICAL ROD PANIC EXIT DEVICE crlaurence.com Phone: (800) 421-6144 Fax: (866) 921-0531 crlaurence.com usalum.com crl-arch.com 11M0250 ORDER OF ASSEMBLY

More information

FIGURE 1, TYPE B Active leaf opens both doors. Overlap plates installed on the inactive

FIGURE 1, TYPE B Active leaf opens both doors. Overlap plates installed on the inactive INS-143/PM April 20, 2007 Detex Corp, 302 Detex Drive, New Braunfels, Texas 78130 (830)629-2900/1-800-729-3839/ FAX(830)620-6711 E-Mail: detex@detex.com Internet: www.detex.com INSTALLATION INSTRUCTIONS

More information

For installation assistance, contact SARGENT at DOORS SHOWN HERE SWING IN FOR ILLUSTRATION PURPOSES ONLY.

For installation assistance, contact SARGENT at DOORS SHOWN HERE SWING IN FOR ILLUSTRATION PURPOSES ONLY. SARGENT Installation Instructions for LP8600 x LR8600 & 12-LP8600 x 12-LR8600 Series Low Profile Panic and Fire Exit Devices on Double Egress & Double Doors or LS8600 & 12-LS8600 Low Profile Exit Device

More information

INSTALLATION INSTRUCTIONS CRL JACKSON

INSTALLATION INSTRUCTIONS CRL JACKSON INSTALLATION INSTRUCTIONS CRL JACKSON 3185 MID-PANEL CONCEALED VERTICAL ROD PANIC EXIT DEVICE crlaurence.com Phone: (800) 421-6144 Fax: (866) 921-0531 crlaurence.com usalum.com crl-arch.com 11M0252 ORDER

More information

INSTALLATION INSTRUCTIONS FOR INSTALLING T-SERIES EXTRA HEAVY DUTY LEVER LOCKSET

INSTALLATION INSTRUCTIONS FOR INSTALLING T-SERIES EXTRA HEAVY DUTY LEVER LOCKSET HIGH EDGE 2 1/4"(57mm) 03079400070 INSTALLATION INSTRUCTIONS FOR INSTALLING T-SERIES EXTRA HEAVY DUTY LEVER LOCKSET IMPORTANT: THIS LOCK IS NON-HANDED. LOCK IS FACTORY PACKED PREADJUSTED FOR 1³ ₄" (45mm)

More information

*D-1030* 1 PARTS CHECK 8 REVERSING INSTRUCTIONS F-XX-C & XX-C D Customer Service. Installation Instructions. Exit Devices

*D-1030* 1 PARTS CHECK 8 REVERSING INSTRUCTIONS F-XX-C & XX-C D Customer Service. Installation Instructions. Exit Devices *D-1030* D-1030 F-XX-C & XX-C Exit Devices Installation Instructions 8 REVERSING INSTRUCTIONS TO REVERSE THE HANDING OF A (F)XX-C DEVICE NOTE: TO REVERSE TRIM, REFER TO SEPARATE INSTALLATION SHEETS. 1

More information

33/35A Series. Devices covered by these instructions: Rim Exit Device. CD33/35A Rim Exit Device EL33/35A Rim Exit Device SS33/35A Rim Exit Device

33/35A Series. Devices covered by these instructions: Rim Exit Device. CD33/35A Rim Exit Device EL33/35A Rim Exit Device SS33/35A Rim Exit Device 911402-00 Rim Exit Device 33/35A Series Installation Instructions Devices covered by these instructions: 33/35A Rim Exit Device CD33/35A Rim Exit Device EL33/35A Rim Exit Device SS33/35A Rim Exit Device

More information

33/3547A. Special tools needed: #10-24 tap Drill bits: #25, 5/16, 13/32, 1/2

33/3547A. Special tools needed: #10-24 tap Drill bits: #25, 5/16, 13/32, 1/2 911404-00 Concealed Vertical Rod Exit Device 33/3547A Installation Instructions Devices covered by these instructions: 33/3547A and 33/3548A Concealed Vertical Rod Exit Device 33/3547A-F and 33/3548A-F

More information

1530(F) Mortise Exit Devices Installation Instructions

1530(F) Mortise Exit Devices Installation Instructions 1530(F) Mortise Exit Devices Installation Instructions Singe Doors or Pairs (2) 12-12-24 PFHUM/WS 798 Universal Strike Standard Device Package Devices are packed ready for application reinforced metal

More information

GANTRY SYSTEM ASSEMBLY MANUAL

GANTRY SYSTEM ASSEMBLY MANUAL LOPRO GNTRY SYSTEM SSEMBLY MNUL The LoPro gantry bracket enables LoPro linear motion systems to be connected together to form gantry systems. The gantry bracket allows numerous gantry system configurations

More information

Safety glasses Measuring tape Level Pencil Power drill Center punch Phillips screw driver Saw horse

Safety glasses Measuring tape Level Pencil Power drill Center punch Phillips screw driver Saw horse EX76 Concealed Vertical Rod Exit Device Preparation Guide and Installation Instructions Box Contents EX76 Concealed Vertical Rod Exit Device Back Bar Active Push Bar Filler Plate Door Kit with Templates

More information

TIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter

TIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 TIRE RACK INSTALLATION INSTRUCTIONS 07-11 Dodge Sprinter Please read before beginning Stainless steel hardware may bind together

More information

ASSA ABLOY. Installation Instructions. MP9800 Series Multi-Point Lock. MP9800 Series Multi-Point Lock Wood Doors. Wood Doors ASSA ABLOY.

ASSA ABLOY. Installation Instructions. MP9800 Series Multi-Point Lock. MP9800 Series Multi-Point Lock Wood Doors. Wood Doors ASSA ABLOY. Installation Instructions MP9800 Series Multi-Point Lock MP9800 Series Multi-Point Lock, the global leader in door opening solutions 1 of 12 Copyright 2016 Corbin Russwin Inc., an Group company. Table

More information

Installation Instructions

Installation Instructions VON DUPRIN Installation Instructions 98/9947WDC Concealed Vertical Rod Exit Device Wood Door Applications Devices covered by these instructions: 98/9947WDC Concealed Vertical Rod Device 98/9947WDC-F (Fire)

More information

ASSA ABLOY. Installation Instructions. MP9800 Series Multi-Point Lock. MP9800 Series Multi-Point Lock Hollow Metal & Aluminum Doors

ASSA ABLOY. Installation Instructions. MP9800 Series Multi-Point Lock. MP9800 Series Multi-Point Lock Hollow Metal & Aluminum Doors Installation Instructions MP9800 Series Multi-Point Lock MP9800 Series Multi-Point Lock, the global leader in door opening solutions 1 of 12 Copyright 2016 Corbin Russwin Inc., an Group company. All rights

More information

GlideRite Retractable Cover System For Hot Spot Spas (SE & SLX only)

GlideRite Retractable Cover System For Hot Spot Spas (SE & SLX only) List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.

More information

RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS

RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side.

More information

Melamine Plastic Laminate. Toilet Partition Installation Manual

Melamine Plastic Laminate. Toilet Partition Installation Manual Melamine Plastic Laminate Toilet Partition Installation Manual PHONE: FAX: 1-866-317-2786 ATTENTION DO NOT MIX FASTENER PACKS EACH FASTENER PACK HAS THE NECESSARY BOLTS, BARRELS AND SCREWS TO INSTALL THE

More information

INSTALLATION INSTRUCTIONS RH 412 STEEL DOORS

INSTALLATION INSTRUCTIONS RH 412 STEEL DOORS By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side. Note: Having the hood open makes the job

More information

Installation Instructions

Installation Instructions Installation Instructions For Models: Model Number / Description File Name 1540 Classic Series P-Lam Toilet Partitions 1540.pdf 1 INSTALLATION INSTRUCTIONS LAMINATED PLASTIC TOILET PARTITIONS 1540 Classic

More information

WPS crew Doors Installation instructions

WPS crew Doors Installation instructions WPS-132-133 crew Doors Installation instructions ORDER OF INSTALLATION FOR A COMPLETE ENCLOSURE OF A CREW WPS (Weather Protection System) IS AS FOLLOWS: 1. Heater 2. Rear Thresholds - Right Hand & Left

More information

How To Measure Your Finished Opening

How To Measure Your Finished Opening 3000 Series Bifold Doors How To Measure Your Finished Opening MEASURE FROM RIGHT TO LEFT 2 PLACES (WIDTH) MEASURE FROM TOP TO BOTTOM 2 PLACES (HEIGHT) Tools Required for Assembly: Tools Needed: Phillips

More information

WD WD7000 Series

WD WD7000 Series WD-7000 12-WD7000 Series Wood Door Concealed Vertical Rod Multi-Point Lock Installation Instructions Copyright 2015, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction

More information

Calf-Tel Pen System Assembly Instructions

Calf-Tel Pen System Assembly Instructions Calf-Tel Pen System Assembly Instructions (Instructions work for 4, 6, and the 7 Pen Systems) 1 ASSEMBLY OF PEN FRONT AND WALLS START THE ASSEMBLY BY LINING UP THE TWO UNI-DIRECTIONAL ARROWS IN THE TOP,

More information

Active Push Bar. Safety glasses Measuring tape Level Pencil Power drill Drill bits: 5/32, 3/4 Center punch Phillips screw driver

Active Push Bar. Safety glasses Measuring tape Level Pencil Power drill Drill bits: 5/32, 3/4 Center punch Phillips screw driver EX88 Interlocking Rim Exit Device Preparation Guide and Installation Instructions Box Contents EX88 Interlocking Rim Exit Device Back Bar Filler Plate Active Push Bar Cylinder and Trim Interface Kit Mounting

More information

Installation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens

Installation and Assembly - Universal Articulating Swivel Double-Arm for 42 - 60 Plasma Screens Installation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens Models: PLAV 70-UNL, PLAV 70-UNL-S PLAV 70-UNLP, PLAV 70-UNLP-S R This product is UL Listed. It must be

More information

Installation and Assembly - Articulating Swivel Double-Arm for 42" - 71" Plasma Screens

Installation and Assembly - Articulating Swivel Double-Arm for 42 - 71 Plasma Screens Installation and ssembly - rticulating Swivel Double-rm for 42" - 71" Plasma Screens Models: PLV 70, PLV 70-S R This product is UL Listed. It must be installed by a qualified professional installer. Maximum

More information

IMPORTANT: PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE

IMPORTANT: PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE IMPORTANT: PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE 005-07 Cadillac STS Classic 3D Z, Classic Dual Weave, Classic Mesh & Classic Black Mesh Grilles B 7 HR 3 STS Classic 3D Z Grille Part

More information

GlideRite Retractable Cover System For HotSpring & Tiger River Spas (except Classic & pre-2000 Landmark Spas)

GlideRite Retractable Cover System For HotSpring & Tiger River Spas (except Classic & pre-2000 Landmark Spas) List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.

More information

1510(F) Surface Vertical Rod Exit Devices Installation Instructions

1510(F) Surface Vertical Rod Exit Devices Installation Instructions 1510(F) Surface Vertical Rod Exit Devices Installation Instructions Top Mounting Plate (2) 1/4-20 x 3/4" PFHMS Rod Guide Top Rod Shim (2 Supplied) Strike Plate 791 Strike (3) 10-24 x 3/4" PFHMS or (3)

More information

Installing Your Electronic Deadbolt

Installing Your Electronic Deadbolt Ultra Security Plus Electronic Deadbolt Installation Instructions http://www.hberger.com/video-gallery/electronic-deadbolt New Installation Lock Location Preparation (Skip this section if you door has

More information

Retractable Screen Installation Instructions For Vinyl and Aluminum Clad and Wood In-Swing Hinged Doors (See separate instructions for sliding doors)

Retractable Screen Installation Instructions For Vinyl and Aluminum Clad and Wood In-Swing Hinged Doors (See separate instructions for sliding doors) Retractable Screen Installation Instructions For Vinyl and Aluminum Clad and Wood In-Swing Hinged Doors (See separate instructions for sliding doors) IMPORTANT: Please read before you begin. Table of Contents

More information

Installation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens

Installation and Assembly - Universal Articulating Swivel Double-Arm for 42 - 60 Plasma Screens Installation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens Models: PLAV 70-UNL, PLAV 70-UNL-S PLAV 70-UNLP, PLAV 70-UNLP-S R This product is UL Listed. It must be

More information

Installation Type. Edge of Door. Pull (Hinge) Side Mounted. Hinge Edge of Door. Push (Stop) Side Mounted

Installation Type. Edge of Door. Pull (Hinge) Side Mounted. Hinge Edge of Door. Push (Stop) Side Mounted Installation Instructions CAUTION An incorrectly installed or improperly adjusted door closer can cause property damage or personal injury. These instructions should be followed to avoid the possibility

More information

Installation Instructions - Model V4JSD 1

Installation Instructions - Model V4JSD 1 Installation Instructions - Model V4JSD 1 Support Assemblies: Parts list: (Note see enclosed cut sheet for quantities and dimensional information) A vertical structural member (1 ½ x 1 ½ modular frame)

More information

* * 22 & 22-F. Please give these instructions to building owner after device is installed BS EN 1125 : 2008

* * 22 & 22-F. Please give these instructions to building owner after device is installed BS EN 1125 : 2008 *911407-00* Rim device 911407-00 22 & 22-F Installation Instructions BS EN 1125 : 2008 Devices covered by these instructions: 22 Rim Exit Device 22-F Rim Fire Exit Device These instructions are presented

More information

Privacy Wall Glass Selections - Polished Edge Slider Door

Privacy Wall Glass Selections - Polished Edge Slider Door Privacy Wall Glass Selections - Polished Edge Slider Door 3/6" HEX BIT PUTTY KNIFE #2 ACR BIT SUCTION CUP HOLDERS DOOR LEAF: Satin Tempered Clear Tempered LOCTITE 425 SIDE LIGHT ETCHED GLASS STYLES: Satin

More information

Installation Instructions. Installation Type

Installation Instructions. Installation Type Installation Instructions 800 & 8050 Slide Track Door Closers Non Hold Open & Hold Open Models Note: Hold open models are not permitted to be installed in Listed fire door assemblies. PULL SIDE MOUNTED

More information

00108/00110 INSTRUCTION MANUAL

00108/00110 INSTRUCTION MANUAL 00108/00110 INSTRUCTION MANUAL Removable and Adjustable Mudflap System IMPORTANT! Exhaust Systems Note: Any modifications to the factory installed exhaust system may void your manufacturer s warranty.

More information

Installation Instructions. Installation Type

Installation Instructions. Installation Type Installation Instructions 300 & 3050 Slide Track Door Closers Non Hold Open & Hold Open Models Note: Hold open models are not permitted to be installed in Listed fire door assemblies. PULL SIDE MOUNTED

More information

7110(F), 7170(F)(LBR) Surface Vertical Rod Exit Device Series Installation Instructions

7110(F), 7170(F)(LBR) Surface Vertical Rod Exit Device Series Installation Instructions 7110(F), 7170(F)(LBR) Surface Vertical Rod Exit Device Series Installation Instructions Shim (2) Supplied Strike Plate 791 Strike (3) 10-24 x 3/4 (19mm) PFHMS Strike Angle Must Engage Strike 12-24 FHPMS

More information

Installation and Assembly - Desktop Swivel Mount For 32" - 55" Flat Panel Display

Installation and Assembly - Desktop Swivel Mount For 32 - 55 Flat Panel Display Installation and ssembly - Desktop wivel ount For 32" - 55" Flat Panel Display odels: HP455 ax Load apacity: 75 lb (34 kg) IUED: 2012-06-28 HEET #: 125-9328-4 (2017-10-20) NOTE: Read instruction sheet

More information

Installation Instructions

Installation Instructions Installation Instructions CAUTION An incorrectly installed or improperly adjusted door closer can cause property damage or personal injury. These instructions should be followed to avoid the possibility

More information

2300 BI-FOLD INSTALLATION GUIDE

2300 BI-FOLD INSTALLATION GUIDE 2300 BI-FOLD INSTALLATION GUIDE INSTALLATION INSTRUCTIONS OF MAIN FRAME Header #8 x 2½ zinc coated screws 2 1 2 Jamb Jamb 1 1 3 #8 x 2½ zinc coated screws 4 1 4 3 #8 x 2½ zinc coated screws 5 Threshold

More information

PAK Drum Roll Top Assembly Instructions. Note: 2 people will be required to assemble roll top

PAK Drum Roll Top Assembly Instructions. Note: 2 people will be required to assemble roll top PAK901 4 Drum Roll Top Assembly Instructions Note: 2 people will be required to assemble roll top PLEASE READ ASSEMBLY INSTRUCTIONS CARFULLY Tools required: 5/8 Socket & Ratchet 9/16 Deep Well Socket &

More information

INSTALLATION INSTRUCTIONS HEAVY DUTY TILT WALL MOUNT Model: PPH-2000

INSTALLATION INSTRUCTIONS HEAVY DUTY TILT WALL MOUNT Model: PPH-2000 INSTALLATION INSTRUCTIONS HEAVY DUTY TILT WALL MOUNT Model: PPH-2000 Specifications: Accomodates Akira and Orion 84" displays without interface bracket; accomodates other large flat panel displays with

More information

ASSA ABLOY Series Installation Instructions. Regular Arm. Parallel Arm. Top Jamb Mount. Multi-Sized 1 thru 6 Non-Hold Open and Hold Open Models

ASSA ABLOY Series Installation Instructions. Regular Arm. Parallel Arm. Top Jamb Mount. Multi-Sized 1 thru 6 Non-Hold Open and Hold Open Models 9500 Series Installation Instructions Multi-Sized 1 thru 6 Non-Hold Open and Hold Open Models Regular Pages 5 & 6 Parallel Pages 7 & 8 Top Jamb Mount Pages 9 & 10 IMPORTANT: An improperly installed or

More information

RangerWare Fiberglass Door System Installation Instructions P/N

RangerWare Fiberglass Door System Installation Instructions P/N Page 1 of 9 RangerWare Fiberglass Door System Installation Instructions P/N 2878016 ORDER OF INSTALLATION Note: To assure proper order, read all Accessory Installation Instructions before beginning. 1.

More information

v1.0 ASSEMBLY GUIDE Mia Wide Bookcase

v1.0 ASSEMBLY GUIDE Mia Wide Bookcase v1.0 ASSEMBLY GUIDE Mia Wide Bookcase Components Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase.

More information

ED5800 (A) Series. Installation Instructions. Concealed Vertical Rod. Exit Device WARNING

ED5800 (A) Series. Installation Instructions. Concealed Vertical Rod. Exit Device WARNING Strike Shim (2) Supplied Strike Plate (3) 10-24 x 3/4" PFHMS (6) 10-24 x 1/2" PFHMS Top Latch TopTube Concealed Vertical Rod Exit Device Important: For use with metal doors only. Device is packed ready

More information

INSTALLATION INSTRUCTIONS GT1006E TALL CABINET, RESIN WALL MOUNT

INSTALLATION INSTRUCTIONS GT1006E TALL CABINET, RESIN WALL MOUNT INSTALLATION INSTRUCTIONS GT1006E TALL CABINET, RESIN WALL MOUNT CARTON CONTENTS PART 1 - CABINET ASSEMBLY QUANTITY DESCRIPTION CARTON #1 1 CABINET COMPONENTS PART 2 - WALL MOUNTING QUANTITY DESCRIPTION

More information

D2/367A ASSEMBLY INSTRUCTIONS 6 BAY AV CREDENZA. Salamander 6 Bay AV Credenza [5.17] page 1 of 8

D2/367A ASSEMBLY INSTRUCTIONS 6 BAY AV CREDENZA. Salamander 6 Bay AV Credenza [5.17] page 1 of 8 D2/367 SSEMBLY INSTRUCTIONS 6 BY V CREDENZ Salamander 6 Bay V Credenza 503-232 [5.17] page 1 of 8 hardware B I L C J D K M E ID PRT # DESCRIPTION F G H 303-453 1/4-20 x 4 Head Socket Screw B 300-518 1/4-20

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS HIGH PRESSUE LAMINATE (HPL) TOILET PARTITIONS 1030 TrimLineSeries 1040 DesignerSeries Includes continuous hardware option.65. IMPORTANT: Storage and Handling Information on last

More information

Assembly Instructions

Assembly Instructions Unite Panel System Hinge Door July 2016 #12 x / slotted hex washer head bolt Figure 1 threshold bracket frame Detail F threshold bracket threshold bracket (installed) #12 x / slotted hex washer head bolt

More information

4 BAY Low Profile - SINGLE XL DISPLAY WALL MOUNT CABINET

4 BAY Low Profile - SINGLE XL DISPLAY WALL MOUNT CABINET D1/347Mxl SSEMLY INSTRUCTIONS 4 Y Low Profile - SINGLE XL DISPLY WLL MOUNT CINET TIP HZRD WRNING! Cabinet must be affixed to wall. For use with video monitors weighing 300 lbs (136kg) or less. Use with

More information

INSTALLING INVISIRAIL GLASS PANELS POST INFORMATION... 2 PRE-INSTALLATION... 2

INSTALLING INVISIRAIL GLASS PANELS POST INFORMATION... 2 PRE-INSTALLATION... 2 Contents POST INFORMATION... 2 PRE-INSTALLATION... 2 STEP A1: MEASURING FOR INVISIRAIL CUSTOM GLASS PANELS (skip if using Standard Sized Panels)... 2 STEP A2: GATHER ADDITIONAL TOOLS/SUPPLIES... 2 STEP

More information

EXIT DEVICE OPERATION FIRE DOOR LABELS, STRIKES AND FRAME SCREWS FOR INFORMATION CALL OR VISIT RITEDOOR.COM

EXIT DEVICE OPERATION FIRE DOOR LABELS, STRIKES AND FRAME SCREWS FOR INFORMATION CALL OR VISIT RITEDOOR.COM RECORD & LABELS WHAT THIS OWNER'S CAN DO FOR YOU It explains exactly how The Rite Door operates. It explains periodic maintenance requirements necessary to assure reliable operation. It explains simple

More information

Shetland Stalls Installation Instructions

Shetland Stalls Installation Instructions Shetland Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 1/9/18 Before you start Kit can accommodate up to 12 wide stall front

More information

Installation and Assembly: Flat Panel Pull-out Swivel Wall Mount

Installation and Assembly: Flat Panel Pull-out Swivel Wall Mount Installation and ssembly: Flat Panel Pull-out Swivel Wall Mount Models: SP850-V2X2 2300 White Oak Circle urora, Il 60502 (800) 865-2112 Fax: (800) 359-6500 www.peerlessmounts.com ISSUED: 01-17-12 SHEET

More information

INSTALL INSTRUCTIONS WELCOME TO THE NEWAGE PERFORMANCE CABINETRY SERIES NEWAGE STEEL WELDED CABINETRY

INSTALL INSTRUCTIONS WELCOME TO THE NEWAGE PERFORMANCE CABINETRY SERIES NEWAGE STEEL WELDED CABINETRY NEWAGE STEEL WELDED CABINETRY WELCOME TO THE NEWAGE PERFORMANCE CABINETRY SERIES ALL CABINETS MUST BE MOUNTED TO STUDS ON A SECURE WALL, AS PER THESE INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS

More information

6 BAY AV CREDENZA WITH DUAL DISPLAY MOUNT

6 BAY AV CREDENZA WITH DUAL DISPLAY MOUNT D2/367M2 SSEMLY INSTRUCTIONS 6 Y V CREDENZ WITH DUL DISPLY MOUNT TIP HZRD WRNING! For use with video monitors weighing 175lbs (80kg) or less. Use with heavier televisions may result in instability causing

More information

Installation Instructions For The 8850FL Series Mortise eboss

Installation Instructions For The 8850FL Series Mortise eboss Installation Instructions For The 8850FL Series Mortise eboss Electronic Battery Operated Security Solution FEATURES Battery Operated (Hardwire Capable) Motorized Grade 1 Mortise Lock 94 User Code Capacity

More information

Grade 8 Enriched Math Catapult Project 2012 Step by Step Instructions to building a catapult

Grade 8 Enriched Math Catapult Project 2012 Step by Step Instructions to building a catapult Grade 8 Enriched Math Catapult Project 2012 Step by Step Instructions to building a catapult Grade 8 Enriched Math Project INSTRUCTION SHEET FOR CATAPULT Procedures, materials and tools: below is a step-bystep

More information

Assembly Instructions

Assembly Instructions 1 27694 Trend Podium Assembly Instructions #27694 Trend Podium Part Drawing Description Qty Part Drawing Description Qty P-1 Base 1 EA Hardware List Screw M6x12mm 30 EA P-2 Right Side Panel 1 EA A2 Phil

More information

ASSEMBLY INSTRUCTIONS MANUAL

ASSEMBLY INSTRUCTIONS MANUAL PAGE 1 OF 9 RECOMMENDED TOOLS FOR ASSEMBLY: ALLEN WRENCH (INCLUDED) BOX WRENCH (INCLUDED) PHILLIPS SCREW DRIVER (NOT INCLUDED) PARTS IN CARTON: ALLEN WRENCH SCREWS (20 EACH) ROUND HEAD SCREWS (8 EACH)

More information

4 BAY Low Profile WALL MOUNT CABINET

4 BAY Low Profile WALL MOUNT CABINET D1/347 SSEMLY INSTRUCTIONS 4 Y Low Profile WLL MOUNT CINET TIP HZRD WRNING! Cabinet must be affixed to wall. For use to prevent tipping in compliance with capacity of cabinet specified. Use with heavier

More information

INSTALLATION INSTRUCTIONS FOR FRONT CASTING DECK RAIL Ranger

INSTALLATION INSTRUCTIONS FOR FRONT CASTING DECK RAIL Ranger INSTALLATION INSTRUCTIONS FOR FRONT CASTING DECK RAIL Ranger TOOLS REQUIRED FOR INSTALLATION: Drill motor, (1) 5/16 inch drill bit, (1) 13/64 drill bit, (1) 3/16 inch hex wrench (1) 3/32 inch hex wrench.

More information

4600 Series Rim Narrow Stile Exit Device Installation Instructions I-ED01162

4600 Series Rim Narrow Stile Exit Device Installation Instructions I-ED01162 DEVICES COVERED IN THIS DOCUMENT: 4600 Series Rim Panic Narrow Stile Exit Device 4600 Series Rim Fire Narrow Stile Exit Device OVERVIEW Outside of Door RHR LHR Inside of Door APPLICATIONS 4950 BLADE STOP

More information

INSTALLATION INSTRUCTIONS INS T A L L A TIO N INS T R U C TIO N S ROD IRON SCROLL HANGER R H

INSTALLATION INSTRUCTIONS INS T A L L A TIO N INS T R U C TIO N S ROD IRON SCROLL HANGER R H INS T A L L A TIO N INS T R U C TIO N S ROD IRON SCROLL HANGER 10.5.2016 2-1- 3/16" 11/16" 8" 8 O 2-7/8 Ø2-7/8" 3-1/2 3-1/2" 12-9/16 12-9/16" PLEASE NOTE: These instructions are specific to a particular

More information

INSTALLING YOUR NEW SPRING LIFT ARM KIT

INSTALLING YOUR NEW SPRING LIFT ARM KIT INSTALLING YOUR NEW SPRING LIFT ARM KIT 1. Measure the distance that the roof is to be raised. [If your lift system is completely non-functional, you will need to calculate or estimate this distance as

More information

K9 KIT INSTALLATION INSTRUCTIONS CROWN VIC KK-K9-F7-K

K9 KIT INSTALLATION INSTRUCTIONS CROWN VIC KK-K9-F7-K K9 KIT INSTALLATION INSTRUCTIONS 1998-2011 CROWN VIC KK-K9-F7-K TOOLS REQUIRED: Power Drill (Cordless preferable) Drill Bit Set Standard Wrench and Socket Set Metric Socket Set Screwdriver Set Torx Bit

More information

Track Rack. * Track Racks are not lockable

Track Rack. * Track Racks are not lockable The Track Rack s unique staggered, sliding hook design creates the greatest parking efficiency while still providing easy access to any particular bike. When adding or removing a bike to the rack, simply

More information

3 BAY AV CREDENZA WITH SINGLE DISPLAY MOUNT

3 BAY AV CREDENZA WITH SINGLE DISPLAY MOUNT D2/337M1 SSEMLY INSTRUCTIONS 3 Y V CREDENZ WITH SINGLE DISPLY MOUNT TIP HZRD WRNING! For use with video monitors weighing 175lbs (80kg) or less. Use with heavier televisions may result in instability causing

More information

TOOLS REQUIRED FOR ASSEMBLY. Rubber Mallet or Plastic Tip Hammer PARTS REQUIRED FOR ASSEMBLY OF SINGLE ENTRY STARTER.

TOOLS REQUIRED FOR ASSEMBLY. Rubber Mallet or Plastic Tip Hammer PARTS REQUIRED FOR ASSEMBLY OF SINGLE ENTRY STARTER. TOOLS REQUIRED FOR ASSEMBLY Rubber Mallet or Plastic Tip Hammer Top Cover Support PARTS REQUIRED FOR ASSEMBLY OF SINGLE ENTRY STARTER Back Stop Divider Closed 'L' Upright Slotted Reinforcement Support

More information

ROS-APT Caucus Plinth Table with Trough Note: Details apply, however the actual configuration of your table may vary from what is depicted here.

ROS-APT Caucus Plinth Table with Trough Note: Details apply, however the actual configuration of your table may vary from what is depicted here. ROS-APT Caucus Plinth Table with Trough Note: Details apply, however the actual configuration of your table may vary from what is depicted here. Parts List - Tables Tops, Top Insert Panels and Base panels

More information

INSTALLATION MANUAL FORTRESS SERIES

INSTALLATION MANUAL FORTRESS SERIES Guardian Security Structures TEL 1-406-212-2334 EMAIL rg@gssdoors.com WEB www.gssdoors.com FORTRESS SERIES GENERAL INSTALLATION GUIDELINES 1. The door frame is installed using 16 bolt screws 7,5 mm in

More information

LOFT DOOR HANGER BARN DOORS & HARDWARE. Hardware Installation Instructions. Page

LOFT DOOR HANGER BARN DOORS & HARDWARE. Hardware Installation Instructions. Page LOFT DOOR HANGER Page 1 Specifications 2 7/16" 3/8" 1-1/2 1-3/4 Ø3 3 7/8" 11-1/16 Page 2 Parts and Tools Tools Needed Tape Measure Pencil Drill with 1/8, 1/4 and 3/8 bits, 1 spade bit and Phillips bit

More information

Fortress Fe Posts must always be secured to the deck framing. Fortress Fe Posts should never be attached to only the deck boards.

Fortress Fe Posts must always be secured to the deck framing. Fortress Fe Posts should never be attached to only the deck boards. Installation Instructions for FortressCable V-Series Cable Stair Panel System with UB-05 With ngle dapter and Fe Posts It is the responsibility of the installer to meet all code and safety requirements,

More information

Strata. urniture. Adriana Instructions. Parts in the Arm Box: Parts in the Body Box: Watch our assembly videos at

Strata. urniture. Adriana Instructions. Parts in the Arm Box: Parts in the Body Box: Watch our assembly videos at 1A Watch our assembly videos at www.strataf.com/videos Parts in the Arm Box: Arm - Outside View Arm - Inside View 1B Parts in the Body Box: Back Deck x 1 Seat Deck x 1 with the Feet attached Back Panel

More information

Equilibrium. Conference Table. Installation Instruction. Revision B 11/07/16

Equilibrium. Conference Table. Installation Instruction. Revision B 11/07/16 Equilibrium Conference Table Installation Instruction Revision B 11/07/16 Equilibrium End User Agreement Enwork Equilibrium table bases must be installed directly onto a four inch minimum thickness concrete

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS HIGH PRESSUE LAMINATE (HPL) TOILET PARTITIONS 1030 TrimLineSeries 1040 DesignerSeries Includes continuous hardware option.65. IMPORTANT: Storage and Handling Information on last

More information

INSTALLATION INSTRUCTIONS KK-K9-F14-K K9 KIT FOR FORD EXPEDITION

INSTALLATION INSTRUCTIONS KK-K9-F14-K K9 KIT FOR FORD EXPEDITION INSTALLATION INSTRUCTIONS KK-K9-F14-K-32 32 K9 KIT FOR 2003-2016 FORD EXPEDITION TOOLS REQUIRED: Power Drill Drill Bit Set Standard & Metric Socket Sets Phillips Screw Driver Open End Wrench Set Wire Cutters

More information

Phone # La Jolla Doors. Block Frame Installation Manual Aluminum Frame with either Vinyl or Aluminum Panels

Phone # La Jolla Doors. Block Frame Installation Manual Aluminum Frame with either Vinyl or Aluminum Panels Phone # 800-440-8785 www.lajolladoors.com La Jolla Doors Block Frame Installation Manual Aluminum Frame with either Vinyl or Aluminum Panels Thank you for choosing La Jolla Doors In this manual you will

More information

INSTALLATION GUIDE Ceiling TV Mount MHP-52

INSTALLATION GUIDE Ceiling TV Mount MHP-52 ISTLLTIO GUIDE Ceiling TV Mount MHP-52 Max Load Capacity: 125 lbs (57kg) ote: Read entire instruction sheet before you start installation and assembly. Be sure to read this entire manual thoroughly and

More information

Shim (2) Supplied. Strike Plate. (3) x 5/8" PFHMS or 10 x 1" PFHWS. Top Latch. (3) x 1/4" PRHMS. Latch Cover. (2) 8 x 3/8" PFH AB SMS

Shim (2) Supplied. Strike Plate. (3) x 5/8 PFHMS or 10 x 1 PFHWS. Top Latch. (3) x 1/4 PRHMS. Latch Cover. (2) 8 x 3/8 PFH AB SMS Installation Instructions ED5400 (A) Series ED5470 (B) Series Surface Vertical Rod Exit Devices Strike Angle Must Engage Strike Top Strike 10-24 PFHMS Top Bracket and Strike required for ED5470. Shim (2)

More information

ED5200(A) Series Rim Exit Devices

ED5200(A) Series Rim Exit Devices ED5200() Series Rim Exit Devices Installation Instructions (Single Doors or Pairs with Mullion) FM156 08/11 For Metal, omposite and Wood Doors of Either Hand End lamp (3) 8-32 x 5/16" Flat Head, Undercut

More information

Installation Instructions

Installation Instructions Important 1. Acclimate materials 24 hrs before installation. Maintain temperature controlled environment after installation 2. Install in accordance with manufacturer s installation instructions. Failure

More information

1500(F) Rim Exit Devices Installation Instructions

1500(F) Rim Exit Devices Installation Instructions 1500(F) Rim Exit Devices Installation Instructions Singe Doors or Pairs (Panic Label) 1500 - RHR 1500 - LHR 1500F - RHR (Fire Label) 1500F - LHR Standard Device Package Devices are packed ready for application

More information