MSC Studentenwettbewerb. Wintersemester 2012/13. Marc/Mentat 2012
|
|
- Derrick Stone
- 5 years ago
- Views:
Transcription
1 MSC Studentenwettewer Wintersemester 2012/13 Mrc/Mentt 2012
2 Aufge Wie groß ist die mximle Verschieung in Y Richtung im nichtlineren Fll? Required File: tip_lod.mud.
3 2 TUTORIAL
4 Prolem Description In this exercise, cntilever em is sujected to sttic lod. The em is initilly nlyzed using smll deformtion theory. However, fter reviewing the results, it ecomes pprent tht smll deformtion theory is not pproprite for this prolem. Susequently, lrge deformtion nlysis is performed (Dt in next pge) Section A-A
5 Prolem Description Section A-A Length, L in 2.54 m 1.0 in 25.4 mm 2.0 in 50.8 mm Young s Modulus 30.0 x 10 6 l/in GP Yield Stress l/in MP Poisson s Rtio P 6000 l N
6 Prolem Description (Cont.) The model is mde using eight 2D plne stress, ssumed strin, reduced integrtion (type 114) elements. The elements re uniformly spced long the length of the em (i.e. mesh, eight elements wide nd one element deep). The ssumed strin, reduced integrtion element is designed specificlly for in-plne ending nd is well suited for this prolem. Next consider the plstic properties nd deformtion nd see how the result chnges.
7 Suggested Exercise Steps: 1. Add Plstic Property Tle is Yield Stress nd 30E6 is Young Modulus, Use eq_plstic_strin tle Use 10% slope of the Elstic rnge for plstic region. 2. Add Plstic Property to the Mteril 3. Sudivide the Elements into Smller Meshes 4 x Adjust the Boundry Conditions, Constrin ll the nodes on left edge in X nd Y direction 5. Adjust the Nonliner jo, Request the following results: Glol Plstic Strin, Glol Stress nd Totl Strin 6. Run the Anlysis 7. View results y plotting the Y Displcement 8. View results y plotting the Totl Plstic Strin 9. View results y plotting the Glol Plstic Strin
8 Step 1. Open Model Open Model. Click File: Open. Browse nd Select tip_lod.mud in working directory c. Click Open c
9 Step 2. Add Plstic Property Tle h Add Tle for Yield Stress. Click Tles&Coord. Syst.. Click New 1 Independent Vrile. c. Enter Nme: YieldStress_Tle d. Click on Type e. Select eq_plstic_strin f. Add Dt Points g. In Dilog Enter E5 h. Click Close (65000 is Yield Stress nd 30E6 is Young Modulus, considering plstic rnge slope 10% slope of Elstic rnge so nother point on the curve cn e clculted s follows for the tle 0.1*30E6*0.5+65E3 = 1.565E6) c d f e g
10 Step 3. Add Plstic Property to the Mteril. Click on Mteril Properties. Click on Show Menu c. Click on Structurl d. Click on Plsticity e. Enter Yield Stress: 1 f. Click on Tle g. Click on YieldStress_Tle h. Click Ok nd ll the su forms. c g e h f d
11 Step 4. Sudivide the Mesh Sudivide the Elements into Smller Meshes 4 x 16. Click on Geometry & Mesh. Click on Sudivide c. Enter Divisions: 2 & 4 d. Click on Elements e. Select All Elements d c e
12 Step 5. Adjust the Boundry Conditions Constrin ll the nodes on left edge in X nd Y direction c. Click Boundry Conditions. Click Edit c. Click Fixed d. Click Ok e. Click Add e h d f. Select the Left region g. Click End List h. Check Nodes to e 5 (if not Click on Geometry & Mesh Sweep All to remove the duplicte Nodes nd Elements) f g
13 Step 6. Adjust the Nonliner Jo. Select Jos T. Click on Show Menu c. Click on Properties d. Click Jo Results c d
14 Step 6. Adjust the Nonliner Jo (Cont.) e. In Aville Element Tensors, click Glol Plstic Strin, Glol Stress nd Totl Strin f. Click OK e f
15 Step 7. Run the Anlysis. In Jos Menu, click Run. Click Sumit c. When the Sttus indictes Complete, click on Open Post File (Result Menu) c
16 Step 8. Plot Deformtion in Y Direction Plot liner nlysis results:. Click Results. Click Model Plot c f c. In Deformed Shpe Set Style: Deformed & Originl. d. In Sclr Plot set Style to Contour Bnds. e d g e. Click Sclr. f. Select Displcement Y. i g. Click OK. h. Click Ply. i. Click FILL. h (Result plot is shown in next slide)
17 Step 8. Plot Deformtion in Y Direction (Cont.)?
18 Step 9. Plot Totl Strin. In Sclr Plot click Sclr. Click Equivlent of Totl Strin c. Click Ok c
19 Step 9. Plot Totl Strin (Cont.)
20 Step 10. Plot Glol Plstic Strin. In Sclr Plot click Sclr. Click Equivlent of Glol Plstic Strin Lyer 1 c. Click Ok c
21 Step 10. Plot Glol Plstic Strin (Cont.)
22 Die Lösung itte is zum 31. März 2013 n university.de@mscsoftwre.com 21
Experiment 3: The research of Thevenin theorem
Experiment 3: The reserch of Thevenin theorem 1. Purpose ) Vlidte Thevenin theorem; ) Mster the methods to mesure the equivlent prmeters of liner twoterminl ctive. c) Study the conditions of the mximum
More informationWORKSHOP 15 PARASOLID MODELING
WORKSHOP 15 PARASOLID MODELING WS15-2 Workshop Ojetives Crete prsoli moel of tension fitting using numer of the prsoli tools in MSC.Ptrn WS15-3 Suggeste Exerise Steps 1. Crete new tse for the tension fitting
More information& Y Connected resistors, Light emitting diode.
& Y Connected resistors, Light emitting diode. Experiment # 02 Ojectives: To get some hndson experience with the physicl instruments. To investigte the equivlent resistors, nd Y connected resistors, nd
More informationObjective - Analysis and design of beams. Beams - structural members supporting loads at various points along the member
EHANIS OF ATERIALS Introduction eer Johnston DeWolf zurek Objective - Anlsis nd design of bes es - structurl ebers supporting lods t vrious points long the eber Trnsverse lodings of bes re clssified s
More informationFrom Off-The-Shelf to Market-Ready New Age Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your
From Off-The-Shelf to Market-Ready New ge Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your end-use. visit newageenclosures.com/services or call 855-4N-ENCL
More informationHomework #1 due Monday at 6pm. White drop box in Student Lounge on the second floor of Cory. Tuesday labs cancelled next week
Announcements Homework #1 due Mondy t 6pm White drop ox in Student Lounge on the second floor of Cory Tuesdy ls cncelled next week Attend your other l slot Books on reserve in Bechtel Hmley, 2 nd nd 3
More informationAbaqus CAE (ver. 6.9) Contact Tutorial
Abaqus CAE (ver. 6.9) Contact Tutorial Problem Description Note: You do not need to extrude the right vertical edge of the sensor. 2010 Hormoz Zareh 1 Portland State University, Mechanical Engineering
More informationFrom Off-The-Shelf to Market-Ready New Age Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your
From Off-The-Shelf to Market-Ready New ge Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your end-use. visit newageenclosures.com/services or call 855-4N-ENCL
More information(1) Non-linear system
Liner vs. non-liner systems in impednce mesurements I INTRODUCTION Electrochemicl Impednce Spectroscopy (EIS) is n interesting tool devoted to the study of liner systems. However, electrochemicl systems
More informationSection Thyristor converter driven DC motor drive
Section.3 - Thyristor converter driven DC motor drive.3.1 Introduction Controllble AC-DC converters using thyristors re perhps the most efficient nd most robust power converters for use in DC motor drives.
More information(CATALYST GROUP) B"sic Electric"l Engineering
(CATALYST GROUP) B"sic Electric"l Engineering 1. Kirchhoff s current l"w st"tes th"t (") net current flow "t the junction is positive (b) Hebr"ic sum of the currents meeting "t the junction is zero (c)
More informationSynchronous Machine Parameter Measurement
Synchronous Mchine Prmeter Mesurement 1 Synchronous Mchine Prmeter Mesurement Introduction Wound field synchronous mchines re mostly used for power genertion but lso re well suited for motor pplictions
More informationMODELING THE INFLUENCE OF STITCHING ON DELAMINATION GROWTH IN STITCHED WARP-KNIT COMPOSITE LAP JOINTS
MODELING THE INFLUENCE OF STITCHING ON DELAMINATION GROWTH IN STITCHED WARP-KNIT COMPOSITE LAP JOINTS E.H. Glessgen, I.S. Rju 2 nd C.C. Poe, Jr. 2 Ntionl Reserch Council 2 Mechnics of Mterils Brnch NASA
More informationInvestigation of Ground Frequency Characteristics
Journl of Electromgnetic Anlysis nd Applictions, 03, 5, 3-37 http://dx.doi.org/0.436/jem.03.58050 Published Online August 03 (http://www.scirp.org/journl/jem) Mohmed Nyel Electricl Engineering Deprtment,
More informationTHE EFFECT OF DOWEL SPACING ON THE STRESS AND STRAIN OF CASE-TYPE FURNITURE CORNER JOINT
THE EFFECT OF DOWEL SPACING ON THE STRESS AND STRAIN OF CASE-TYPE FURNITURE CORNER JOINT Seid Hjdrević, Sndr Mrtinović Astrct University of Srjevo, Mechnicl Engineering Fculty, Vilsonovo setliste 9, Srjevo
More informationAbaqus Beam Tutorial (ver. 6.12)
Abaqus Beam Tutorial (ver. 6.12) Problem Description The two-dimensional bridge structure is simply supported at its lower corners. The structure is composed of steel T-sections (E = 210 GPa, ν = 0.25)
More informationA Development of Earthing-Resistance-Estimation Instrument
A Development of Erthing-Resistnce-Estimtion Instrument HITOSHI KIJIMA Abstrct: - Whenever erth construction work is done, the implnted number nd depth of electrodes hve to be estimted in order to obtin
More informationKirchhoff s Rules. Kirchhoff s Laws. Kirchhoff s Rules. Kirchhoff s Laws. Practice. Understanding SPH4UW. Kirchhoff s Voltage Rule (KVR):
SPH4UW Kirchhoff s ules Kirchhoff s oltge ule (K): Sum of voltge drops round loop is zero. Kirchhoff s Lws Kirchhoff s Current ule (KC): Current going in equls current coming out. Kirchhoff s ules etween
More informationExercise 1-1. The Sine Wave EXERCISE OBJECTIVE DISCUSSION OUTLINE. Relationship between a rotating phasor and a sine wave DISCUSSION
Exercise 1-1 The Sine Wve EXERCISE OBJECTIVE When you hve completed this exercise, you will be fmilir with the notion of sine wve nd how it cn be expressed s phsor rotting round the center of circle. You
More informationMesh and Node Equations: More Circuits Containing Dependent Sources
Mesh nd Node Equtions: More Circuits Contining Dependent Sources Introduction The circuits in this set of problems ech contin single dependent source. These circuits cn be nlyzed using mesh eqution or
More informationSUPPLEMENTARY INFORMATION
In the formt provided y the uthors nd unedited. SUPPLEMENTARY INFORMATION ARMOUR (7) :: SUPPLEMENTARY INFORMATION Energy udget constrints on climte sensitivity in light of inconstnt climte feedcks DOI:.3/NCLIMATE37
More informationExample. Check that the Jacobian of the transformation to spherical coordinates is
lss, given on Feb 3, 2, for Mth 3, Winter 2 Recll tht the fctor which ppers in chnge of vrible formul when integrting is the Jcobin, which is the determinnt of mtrix of first order prtil derivtives. Exmple.
More informationWorkshop 7.1 Linear Structural Analysis
Workshop 7.1 Linear Structural Analysis 16.0 Release Introduction to ANSYS Mechanical 1 2015 ANSYS, Inc. September 15, 2015 Goals Workshop 7.1 consists of a 5 part assembly representing an impeller type
More informationPolar coordinates 5C. 1 a. a 4. π = 0 (0) is a circle centre, 0. and radius. The area of the semicircle is π =. π a
Polr coordintes 5C r cos Are cos d (cos + ) sin + () + 8 cos cos r cos is circle centre, nd rdius. The re of the semicircle is. 8 Person Eduction Ltd 8. Copying permitted for purchsing institution only.
More informationPerformance Monitoring Fundamentals: Demystifying Performance Assessment Techniques
Simplifying PID Control. Optimizing Plnt Performnce. Performnce Monitoring Fundmentls: Demystifying Performnce Assessment Techniques Roert C. Rice, PhD Rchelle R. Jyringi Dougls J. Cooper, PhD Control
More informationStudent Book SERIES. Patterns and Algebra. Name
E Student Book 3 + 7 5 + 5 Nme Contents Series E Topic Ptterns nd functions (pp. ) identifying nd creting ptterns skip counting completing nd descriing ptterns predicting repeting ptterns predicting growing
More informationSynchronous Machine Parameter Measurement
Synchronous Mchine Prmeter Mesurement 1 Synchronous Mchine Prmeter Mesurement Introduction Wound field synchronous mchines re mostly used for power genertion but lso re well suited for motor pplictions
More informationFATIGUE BEHAVIOUR OF COMPOSITE JOINTS WITH HEXAGON BOLTS
FATIGUE BEHAVIOUR OF COMPOSITE JOINTS WITH HEXAGON BOLTS Romn Strikov nd Jokim Schön Deprtment of Aeronutics, Royl Institute of Technology SE-1 44 Stockholm, Sweden Structures nd Mterils Deprtment, Aeronutics
More informationUnderstanding Basic Analog Ideal Op Amps
Appliction Report SLAA068A - April 2000 Understnding Bsic Anlog Idel Op Amps Ron Mncini Mixed Signl Products ABSTRACT This ppliction report develops the equtions for the idel opertionl mplifier (op mp).
More informationLecture 20. Intro to line integrals. Dan Nichols MATH 233, Spring 2018 University of Massachusetts.
Lecture 2 Intro to line integrls Dn Nichols nichols@mth.umss.edu MATH 233, Spring 218 University of Msschusetts April 12, 218 (2) onservtive vector fields We wnt to determine if F P (x, y), Q(x, y) is
More informationpdfpost Tutorial pdfpost & ANSYS Workbench extension (v2) for starters.
pdfpost Tutorial pdfpost & ANSYS Workbench extension (v2) for starters. This tutorial shows how to convert ANSYS Mechanical simulation data to 3D PDF using pdfpost and ANSYS Mechanical ACT extension. Our
More informationThis is a repository copy of Effect of power state on absorption cross section of personal computer components.
This is repository copy of Effect of power stte on bsorption cross section of personl computer components. White Rose Reserch Online URL for this pper: http://eprints.whiterose.c.uk/10547/ Version: Accepted
More informationS1 Only VEOG HEOG. S2 Only. S1 and S2. Computer. Subject. Computer
The Eects of Eye Trcking in VR Helmet on EEG Recordings Jessic D. Byliss nd Dn H. Bllrd The University of Rochester Computer Science Deprtment Rochester, New York 14627 Technicl Report 685 My 1998 Astrct
More informationCHAPTER 3 AMPLIFIER DESIGN TECHNIQUES
CHAPTER 3 AMPLIFIER DEIGN TECHNIQUE 3.0 Introduction olid-stte microwve mplifiers ply n importnt role in communiction where it hs different pplictions, including low noise, high gin, nd high power mplifiers.
More informationThe Math Learning Center PO Box 12929, Salem, Oregon Math Learning Center
Resource Overview Quntile Mesure: Skill or Concept: 300Q Model the concept of ddition for sums to 10. (QT N 36) Model the concept of sutrction using numers less thn or equl to 10. (QT N 37) Write ddition
More informationpdfpost Tutorial pdfpost & ANSYS Workbench extension (v3) for starters.
pdfpost Tutorial pdfpost & ANSYS Workbench extension (v3) for starters. This tutorial shows how to convert ANSYS Mechanical simulation data to 3D PDF using pdfpost and ANSYS Mechanical ACT extension. Our
More informationAlgebra Practice. Dr. Barbara Sandall, Ed.D., and Travis Olson, M.S.
By Dr. Brr Sndll, Ed.D., Dr. Melfried Olson, Ed.D., nd Trvis Olson, M.S. COPYRIGHT 2006 Mrk Twin Medi, Inc. ISBN 978-1-58037-754-6 Printing No. 404042-EB Mrk Twin Medi, Inc., Pulishers Distriuted y Crson-Dellos
More informationRadar Altimeter TRANS / REC ( RADAR) APN-117? Made by STC (UK) in 1966
dr ltimeter / ( ) 5826 99 954 2879 117? de by () in 1966 everse engineered 1 july 2014 ht is it his rdr trnsmitter/receiver is distnce meter or ltimeter, bsed on the principle. I don't hve n instrument
More informationMacroscopic and Microscopic Springs Procedure
Mrosopi nd Mirosopi Springs Proedure OBJECTIVE Purpose In this l you will: investigte the spring-like properties of stright wire, disover the strethiness of mteril, independent of the size nd shpe of n
More informationExperiment 3: Non-Ideal Operational Amplifiers
Experiment 3: Non-Idel Opertionl Amplifiers 9/11/06 Equivlent Circuits The bsic ssumptions for n idel opertionl mplifier re n infinite differentil gin ( d ), n infinite input resistnce (R i ), zero output
More informationExperiment 3: Non-Ideal Operational Amplifiers
Experiment 3: Non-Idel Opertionl Amplifiers Fll 2009 Equivlent Circuits The bsic ssumptions for n idel opertionl mplifier re n infinite differentil gin ( d ), n infinite input resistnce (R i ), zero output
More informationFirst Round Solutions Grades 4, 5, and 6
First Round Solutions Grdes 4, 5, nd 1) There re four bsic rectngles not mde up of smller ones There re three more rectngles mde up of two smller ones ech, two rectngles mde up of three smller ones ech,
More informationAbaqus/CAE (ver. 6.14*) Plate/Shell Tutorial
Abaqus/CAE (ver. 6.14*) Plate/Shell Tutorial Problem Description The aluminum arch (E = 79 GPa, ν = 0.33) shown below is completely clamped along the flat faces. The arch supports a pressure of 100 MPa.
More informationSeries AE W PFC INDUSTRIAL POWER SUPPLY
FEATURES Progrmmle output voltge (0%~05%) Progrmmle output current (0%~05%) Universl AC input / Full rnge Constnt current limiting Optionl glol control vi RS3 Selectle +5V / 0.5A or +9V / 0.3A uxiliry
More informationDataflow Language Model. DataFlow Models. Applications of Dataflow. Dataflow Languages. Kahn process networks. A Kahn Process (1)
The slides contin revisited mterils from: Peter Mrwedel, TU Dortmund Lothr Thiele, ETH Zurich Frnk Vhid, University of liforni, Riverside Dtflow Lnguge Model Drsticlly different wy of looking t computtion:
More informationTUTORIAL Electric Machine Modeling
TUTORIAL Electric Mchine Modeling October 206 Electric Mchine Modeling One cn crete electric chine odels using the bsic unction blocks in PSIM. In this tutoril, we will illustrte how to crete the odel
More informationc The scaffold pole EL is 8 m long. How far does it extend beyond the line JK?
3 7. 7.2 Trigonometry in three dimensions Questions re trgeted t the grdes indicted The digrm shows the ck of truck used to crry scffold poles. L K G m J F C 0.8 m H E 3 m D 6.5 m Use Pythgors Theorem
More informationPostprint. This is the accepted version of a paper presented at IEEE PES General Meeting.
http://www.div-portl.org Postprint This is the ccepted version of pper presented t IEEE PES Generl Meeting. Cittion for the originl published pper: Mhmood, F., Hooshyr, H., Vnfretti, L. (217) Sensitivity
More informationMSRS90. Notched Inserts Reduce Cutting Forces When Entering the Workpiece Stable Machining without Chattering
90 Notched Inserts Reduce Cutting Forces When ntering the Workpiece tle Mchining without Chttering mooth Chip vcution Prevents Frcturing Cused y Biting Chips MGACOAT NANO For xtended Tool Life igh Mchining
More informationStudent Book SERIES. Fractions. Name
D Student Book Nme Series D Contents Topic Introducing frctions (pp. ) modelling frctions frctions of collection compring nd ordering frctions frction ingo pply Dte completed / / / / / / / / Topic Types
More informationAnalysis of Pre-tension Level upon Biaxial Behaviour of Fused Systems
ISSN 1392 1320 MATERIALS SCIENCE (MEDŽIAGOTYRA). Vol. 21, No. 2. 2015 Anlysis of Pre-tension Level upon Bixil Behviour of Fused Systems Dont ZUBAUSKIENE, Eugenij STRAZDIENE, Virginijus URBELIS Deprtment
More informationEngineering: Elec 3509 Electronics II Instructor: Prof. Calvin Plett,
Engineering: Elec 3509 Electronics II Instructor: Prof. Clvin Plett, emil cp@doe.crleton.c Objective: To study the principles, design nd nlysis of nlog electronic circuits. Description: In this course,
More informationEngineer-to-Engineer Note
Engineer-to-Engineer Note EE-236 Technicl notes on using Anlog Devices DSPs, processors nd development tools Contct our technicl support t dsp.support@nlog.com nd t dsptools.support@nlog.com Or visit our
More informationSPECIAL EDITION. Spring 2012 Ezine. where crafty is contagious
Spring 2012 Ezine SPECIAL EDITION www.clubchiccircle.com where crfty is contgious shmrock sttionery It is so esy to mke these festive homemde crds! Mke homemde stmp from the end of n pencil erser. With
More informationTIME: 1 hour 30 minutes
UNIVERSITY OF AKRON DEPARTMENT OF ELECTRICAL AND COMPUTER ENGINEERING 4400: 34 INTRODUCTION TO COMMUNICATION SYSTEMS - Spring 07 SAMPLE FINAL EXAM TIME: hour 30 minutes INSTRUCTIONS: () Write your nme
More informationGeometric quantities for polar curves
Roerto s Notes on Integrl Clculus Chpter 5: Bsic pplictions of integrtion Section 10 Geometric quntities for polr curves Wht you need to know lredy: How to use integrls to compute res nd lengths of regions
More informationPower Transformer Decoupling and Simulation of Voltage and Current of Winding Insulation Defect
016 nterntionl Conference on Power Engineering & Energy, Environment (PEEE 016) SBN: 978-1-60595-376- Power Trnsformer Decopling nd Simltion of Voltge nd Crrent of Winding nsltion Defect Chen Ling 1,,
More informationCh13 INTRODUCTION TO NUMERICAL TECHNIQUES FOR NONLINEAR SUPERSONIC FLOW
Ch13 INTRODUCTION TO NUMERICAL TECHNIQUES FOR NONLINEAR SUPERSONIC FLOW Goerning Eqtions for Unste Iniscid Compressible Flow Eler's eqtion Stte eqtions finite-difference nmericl techniqes Goerning Eqtions
More informationCrime Scene Documentation. Crime Scene Documentation. Taking the C.S. What should my notes include. Note Taking 9/26/2013
Crime Scene Documenttion Crime Scene Documenttion Most importnt step in C.S. processing Purpose: permnently record the condition of C.S. & physicl evidence Time consuming Documenter must be orgnized nd
More informationMONOCHRONICLE STRAIGHT
UPDATED 09-2010 HYDROCARBON Hydrocrbon is poncho-style cowl in bulky-weight yrn, worked in the round. It ws designed to be s prcticl s it is stylish, with shping tht covers the neck nd shoulders nd the
More informationABB STOTZ-KONTAKT. ABB i-bus EIB Current Module SM/S Intelligent Installation Systems. User Manual SM/S In = 16 A AC Un = 230 V AC
User Mnul ntelligent nstlltion Systems A B 1 2 3 4 5 6 7 8 30 ma 30 ma n = AC Un = 230 V AC 30 ma 9 10 11 12 C ABB STOTZ-KONTAKT Appliction Softwre Current Vlue Threshold/1 Contents Pge 1 Device Chrcteristics...
More informationTHE STUDY OF INFLUENCE CORE MATERIALS ON TECHNOLOGICAL PROPERTIES OF UNIVERSAL BENTONITE MOULDING MATERIALS. Matej BEZNÁK, Vladimír HANZEN, Ján VRABEC
THE STUDY OF INFLUENCE CORE MATERIALS ON TECHNOLOGICAL PROPERTIES OF UNIVERSAL BENTONITE MOULDING MATERIALS Mtej BEZNÁK, Vldimír HANZEN, Ján VRABEC Authors: Mtej Beznák, Assoc. Prof. PhD., Vldimír Hnzen,
More informationPROGRAMMING MANUAL MTMA/01 MTMV/01 FB00329-EN
RMMING MNUL MTM/01 MTMV/01 FB00329-EN Generl precutions Red the instructions crefully efore eginning the instlltion nd crry out the ctions s specified y the mnufcturer. The instlltion, progrmming, commissioning
More informationTopic 20: Huffman Coding
Topic 0: Huffmn Coding The uthor should gze t Noh, nd... lern, s they did in the Ark, to crowd gret del of mtter into very smll compss. Sydney Smith, dinburgh Review Agend ncoding Compression Huffmn Coding
More informationThree-Phase Synchronous Machines The synchronous machine can be used to operate as: 1. Synchronous motors 2. Synchronous generators (Alternator)
Three-Phse Synchronous Mchines The synchronous mchine cn be used to operte s: 1. Synchronous motors 2. Synchronous genertors (Alterntor) Synchronous genertor is lso referred to s lterntor since it genertes
More informationIR Athermal Achromat Design
08 July 09 IR Atherml Achromt Design Presented to: Optics Wesite Presented y: Willim H. Plin Rod South Deerield, MA 0373 Tel: 4366538 Fx: 438803 Emil: wtylor.tt@comcst.net Ojectives Provide the theoreticl
More informationArticle Design and Experimental Study of a Current Transformer with a Stacked PCB Based on B-Dot
Article Design nd Experimentl Study of Current Trnsformer with Stcked PCB Bsed on B-Dot Jingng Wng 1, Dincheng Si 1, *, Tin Tin 2 nd Rn Ren 2 1 Stte Key Lbortory of Power Trnsmission Equipment nd System
More informationISSCC 2006 / SESSION 21 / ADVANCED CLOCKING, LOGIC AND SIGNALING TECHNIQUES / 21.5
21.5 A 1.1GHz Chrge-Recovery Logic Visvesh Sthe, Jung-Ying Chueh, Mrios Ppefthymiou University of Michign, Ann Aror, MI Boost Logic is chrge-recovery circuit fmily cple of operting t GHz-clss frequencies
More informationHow to remove BRNS/BRFS series from a PWB
Applictions mnul for BRNS/BRFS series How to remove BRNS/BRFS series from PWB VER1.0 Applictions Mnul BRNS/BRFS series Pge 1. Overview 1-1 1.1 Overview 1-1 2. Preprtion 2-1 2.1 2.2 2.3 Removl tool Adhesive
More informationIntroduction to ANSYS Mechanical
Workshop 5.2 Beam Connections 15.0 Release Introduction to ANSYS Mechanical 1 2014 ANSYS, Inc. February 12, 2014 Goals Workshop 5-2 consists of a flange containing 2 parts. The fasteners holding the flange
More informationCHARACTERISTICS OF THE GPS SIGNAL SCINTILLATIONS DURING IONOSPHERIC IRREGULARITIES AND THEIR EFFECTS OVER THE GPS SYSTEM
CHRCTERISTICS OF THE GPS SIGNL SCINTILLTIONS DURING IONOSPHERIC IRREGULRITIES ND THEIR EFFECTS OVER THE GPS SYSTEM Eurico R. de Paula, I.J.Kantor, L.F.C. de Rezende ERONOMY DIVISION NTIONL INSTITUTE FOR
More informationSolutions to exercise 1 in ETS052 Computer Communication
Solutions to exercise in TS52 Computer Communiction 23 Septemer, 23 If it occupies millisecond = 3 seconds, then second is occupied y 3 = 3 its = kps. kps If it occupies 2 microseconds = 2 6 seconds, then
More informationModal Analysis as a Means of Explaining the Oscillatory Behaviour of Transformers
Modl Anlysis s Mens of Explining the Oscilltory Behviour of Trnsformers Modl nlysis hs proved to e n outstnding id in the clcultion nd mesurement of nturl oscill tions of trnsformers. With modl prmeters
More informationUpdate B158J New Chip Breaker Inserts for Turning Expanded Inserts
2009.4 Updte B158J Expnded s New Chip Breker s for Turning Breker Offers the best performnce for utomotive prts pplictions! ysmooth chip control even t vried depths of cut, feeds nd cutting speeds! New
More informationSection 16.3 Double Integrals over General Regions
Section 6.3 Double Integrls over Generl egions Not ever region is rectngle In the lst two sections we considered the problem of integrting function of two vribles over rectngle. This sitution however is
More informationNetwork Theorems. Objectives 9.1 INTRODUCTION 9.2 SUPERPOSITION THEOREM
M09_BOYL3605_13_S_C09.indd Pge 359 24/11/14 1:59 PM f403 /204/PH01893/9780133923605_BOYLSTAD/BOYLSTAD_NTRO_CRCUT_ANALYSS13_S_978013... Network Theorems Ojectives Become fmilir with the superposition theorem
More informationComparison of beam wander correction by quadrant and ideal detectors for aerial quantum communication links
MSc in Photonics Universitt Politècnic de Ctluny (UPC) Universitt Autònom de Brcelon (UAB) Universitt de Brcelon (UB) Institut de Ciències Fotòniques (ICFO) PHOTONICSBCN http://www.photonicsbcn.eu Mster
More informationDigital Design. Sequential Logic Design -- Controllers. Copyright 2007 Frank Vahid
Digitl Design Sequentil Logic Design -- Controllers Slides to ccompny the tetook Digitl Design, First Edition, y, John Wiley nd Sons Pulishers, 27. http://www.ddvhid.com Copyright 27 Instructors of courses
More informationThe Influence of the Properties of Embroidery Threads on Buckling of Fabric Inside of the Embroidered Element
ISSN 1392 1320 MATERIALS SCIENCE (MEDŽIAGOTYRA). Vol. 18, No. 4. 2012 The Influence of the Properties of Emroidery Threds on Buckling of Fric Inside of the Emroidered Element Svetln RADAVIČIENĖ 1, Mild
More informationMSRS90. Hi efficiency Notched and No-hand insert for MSRS90
MGCO MR90 Multiple Cutter i efficiency Notched nd Nohnd insert for MR90 1Notched insert reduces cutting force reduction t the first pss tle mchining without chtter 2mooth chip evcution Prevents frcture
More informationMath 116 Calculus II
Mth 6 Clculus II Contents 7 Additionl topics in Integrtion 7. Integrtion by prts..................................... 7.4 Numericl Integrtion.................................... 7 7.5 Improper Integrl......................................
More informationLEXUS IS250/IS350 FRONT SPOILER Section I - Installation Preparation. Part Number: Section I - Installation Preparation.
Section I - Instlltion Preprtion Prt Numer: 0854-53830 Section I - Instlltion Preprtion Kit Contents 3 Description Front spoiler Hrdwre g Instruction mnul Additionl Items Required For Instlltion Conflicts
More informationEngineer-to-Engineer Note
Engineer-to-Engineer Note EE-297 Technicl notes on using Anlog Devices DSPs, processors nd development tools Visit our Web resources http://www.nlog.com/ee-notes nd http://www.nlog.com/processors or e-mil
More informationMASE 321 Lab. RISA 3D Introduction. Global Parameters. Click the button to start drawing members.
MASE 321 Lab RISA 3D Introduction You can get this information in users manual. (click help ) Once you open the application, you will see the following. Click the button to start drawing members. Global
More informationSTUDY GUIDE, CALCULUS III, 2017 SPRING
TUY GUIE, ALULU III, 2017 PING ontents hpter 13. Functions of severl vribles 1 13.1. Plnes nd surfces 2 13.2. Grphs nd level curves 2 13.3. Limit of function of two vribles 2 13.4. Prtil derivtives 2 13.5.
More informationModule 9. DC Machines. Version 2 EE IIT, Kharagpur
Module 9 DC Mchines Version EE IIT, Khrgpur esson 40 osses, Efficiency nd Testing of D.C. Mchines Version EE IIT, Khrgpur Contents 40 osses, efficiency nd testing of D.C. mchines (esson-40) 4 40.1 Gols
More information510 Series Color Jetprinter
510 Series Color Jetprinter User s Guide for Windows Setup trouleshooting A checklist to find solutions to common setup prolems. Printer overview Lern out the printer prts nd the printer softwre. Printing
More informationEcon 410: Micro Theory. Recall from last time. Production: Two Variable Inputs. Production: Two Variable Inputs
Slide Slide Econ 0: Micro Theory Production with Multiple Variable Inputs Monday, October 9 th, 007 When both types of inputs become variable, the same amount of output can be produced with different amounts
More informationExperimental evaluation of polycrystalline diamond tool geometries while drilling carbon fiber-reinforced plastics
Int J Adv Mnuf Technol (14) 71:195 137 DOI 1.17/s17-13-559-7 ORIGINAL ARTICLE Experimentl evlution of polycrystlline dimond tool geometries while drilling cron fier-reinforced plstics Y. Krpt & B. Değer
More informationModule D1 Introduction to Distribution Systems
D ntroduction to Distriution Systems 30 Module D ntroduction to Distriution Systems Primry Author: Gerld B. Shele, ow Stte University Emil Address: gshele@istte.edu Prerequisite Competencies: Stedy Stte
More informationMultipath Mitigation for Bridge Deformation Monitoring
Journl of Globl Positioning Systems (22) Vol. 1, No. 1: 25-33 Multipth Mitigtion for Bridge Deformtion Monitoring G. W. Roberts, X. Meng, A. H. Dodson, E. Cosser Institute of Engineering Surveying nd Spce
More informationBurr analysis in microgrooving
Int J dv Mnuf Technol (1) 5:569 577 OI 1.17/s17-1-516-7 ORIGINL RTICLE Burr nlysis in microgrooving uy Le & Jong-Min Lee & Su-Jin Kim & ong-yoon Lee & Seok-Woo Lee Received: 3 July 9 /ccepted: 4 Jnury
More informationUltra Low Cost ACCELEROMETER
Chip Scle Pckged Digitl Therml Orienttion Sensing Accelerometer MXC6226XC Document Version D Pge 1 of 13 Fetures Generl Description Fully Integrted Therml Accelerometer X/Y Axis, 8 bit, Accelertion A/D
More informationProposed Cable Tables for SAS2
Tle 50 Requirements for internl le ssemlies using SASDrive onnetors n kplnes. Requirement, Units 1,5 Gps 3Gps 6 Gps Bulk le or kplne:, Differentil impene ohm 100 ± 10 100 g Common-moe impene ohm 32,5 ±
More informationThe Discussion of this exercise covers the following points:
Exercise 4 Bttery Chrging Methods EXERCISE OBJECTIVE When you hve completed this exercise, you will be fmilir with the different chrging methods nd chrge-control techniques commonly used when chrging Ni-MI
More information2005 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media,
005 IEEE. Personl use of this mteril is permitted. Permission from IEEE must be obtined for ll other uses, in ny current or future medi, including reprinting/republishing this mteril for dvertising or
More informationJoanna Towler, Roading Engineer, Professional Services, NZTA National Office Dave Bates, Operations Manager, NZTA National Office
. TECHNICA MEMOANDM To Cc repred By Endorsed By NZTA Network Mngement Consultnts nd Contrctors NZTA egionl Opertions Mngers nd Are Mngers Dve Btes, Opertions Mnger, NZTA Ntionl Office Jonn Towler, oding
More informationHigh-Speed Serial Interface Circuits and Systems
High-Speed Serial Interface Circuits and Systems Design Exercise4 Charge Pump Charge Pump PLL ɸ ref up PFD CP LF VCO down ɸ out ɸ div Divider Converts PFD phase error pulse (digital) to charge (analog).
More informationDiscontinued AN6262N, AN6263N. (planed maintenance type, maintenance type, planed discontinued typed, discontinued type)
ICs for Cssette, Cssette Deck ANN, ANN Puse Detection s of Rdio Cssette, Cssette Deck Overview The ANN nd the ANN re the puse detection integrted circuits which select the progrm on the cssette tpe. In
More informationEliminating Non-Determinism During Test of High-Speed Source Synchronous Differential Buses
Eliminting Non-Determinism During of High-Speed Source Synchronous Differentil Buses Abstrct The t-speed functionl testing of deep sub-micron devices equipped with high-speed I/O ports nd the synchronous
More information