Fastener Selector Guide Bemo standing seam system

Size: px

Start display at page:

Download "Fastener Selector Guide Bemo standing seam system"

Johnathan George
5 years ago
Views:

1 Fastener Selector Guide Bemo standing seam system

Fastener Selector Guide Contents Products for specific applications Pages 4-9

seam system FIXFAST fasteners for the BEMO system There are 3 different types of

reinforced halter BEMO HOOK halter for extreme wind zones These halters are all

For further information regarding the system as a whole, please refer to the BEMO

The halter is a critical component of the BEMO system, and it is important that the

Throughout this guide, fasteners for the BEMO system from FIXFAST are shown - these

2 Fastener Selector Guide Contents Products for specific applications Pages 4-9 Technical data Pages Accessories Page 13 Technical notes Page 14 Bemo standing seam system FIXFAST fasteners for the BEMO system There are 3 different types of halter within the BEMO system: BEMO standard aluminium halter BEMO GFK glass fibre reinforced halter BEMO HOOK halter for extreme wind zones These halters are all designed with specific applications in mind. For further information regarding the system as a whole, please refer to the BEMO literature. The halter is a critical component of the BEMO system, and it is important that the correct fasteners are selected and used to secure them. Throughout this guide, fasteners for the BEMO system from FIXFAST are shown - these fasteners are designed and engineered to work perfectly in conjunction with the halter system and have been tested and proven on many projects. Maximum reliability. Minimum fuss. 2 sales@fixfast.com Orderline:

3 Halter applications Gable End applications Fixing to steel or aluminium 0.5mm - 1.0mm thick Clip to halter Tri-Grip rivet Code: RTG-AA-5.2 x 32 Code: DF3-SS-A x 25 Code: DF2-SS-A x 45 Code: DFT-SS-A x 25 Fixing to steel or aluminium 1.0mm - 2.0mm thick Channel to seam Code: DF2-SS-A x 45 Sealed head rivet Fixing to steel or aluminium 2.0mm - 3.0mm thick Code: DF3-SS-A x 45 Fixing to timber Code: DFT-SS-A x 50 4 sales@fixfast.com Orderline:

Fixed Point applications Flashing applications

sheet, ridge closure etc Stainless steel set

Codes: SET-SS-M6 x 30 NYLOC NUTS-SS-M6 A15 x 6.

closure to seam Sealed head rivet Fixing to

0mm thick Sealed head rivet A2 Stainless steel

4 Fixed Point applications Flashing applications Nut and bolt Fixing to sheet, trapezoidal sheet, ridge closure etc Stainless steel set screw with locking nut and bonded washer. Codes: SET-SS-M6 x 30 NYLOC NUTS-SS-M6 A15 x 6.3 Concealed rivet A2 Stainless steel low profile head self drilling fastener Code: DF3-SS-P-A x 25 Tri-Grip rivet Code: RTG-AA-5.2 x 18 Ridge Closure applications Ridge closure to seam Sealed head rivet Fixing to steel or aluminium 0.5mm - 1.0mm thick Sealed head rivet A2 Stainless steel low profile head self drilling fastener Code: DF3-SS-P-A x 25 6 sales@fixfast.com Orderline:

5 Spacers, Angle and Bar applications Trapezoidal Sheet applications Zed spacer to seam Fixing to steel or aluminium 1.0mm - 3.0mm thick Code: DF3-SS-A x 25 Drip angle to sheet Fixing to steel or aluminium 3.0mm mm thick Code: RSH-AS-4.8 x 14 Code: DF12-SS-A x 40 Flat bar to sheet Fixing to timber Code: RSH-AS-4.8 x 14 Code: DFT-SS-A x 40 Sub-purlin flat bar to steel deck Stitching Tri-Grip rivet Code: RTG-AA-5.2 x 26 A19 Tri-Grip rivet Code: RTG-AA-5.2 x 18 A2 Stainless steel low profile head self drilling fastener (pre-drill bar) Code: DF2-SS-P-A x 25 Code: DF2-SS-LS-A x 25 8 sales@fixfast.com Orderline:

6 Fastener Data Fastener Data continued DF2-SS-6.0 Range DF3-SS-5.5 Range 0.5mm - 2.0mm steel 1.2mm 3.0mm steel 0.5mm steel 0.69 kn 1.2mm steel 1.30 kn 1.2mm steel 2.67 kn 2.0mm steel 2.62 kn 2.0mm steel 4.83 kn 3.0mm steel 4.76 kn Softwood 35mm embedment 3.57 kn DF3-SS-6.0 Range DF12-SS-5.5 Range 1.2mm 3.0mm steel 4.0mm 12.0mm steel 1.5mm steel 2.19 kn 4.0mm steel 2.80 kn 2.0mm steel 3.06 kn 6.0mm steel 3.09 kn 3.0mm steel 6.37 kn 8.0mm steel 6.89 kn 12.0mm steel 6.89 kn 10 sales@fixfast.com Orderline:

Fastener Data continued Fastener Data continued DFT-SS-6.0 Range RTG-AA-5.2 Range 1.4301 stainless steel (304M) Aluminium Nominal lengths (mm) 18 26 32 0.7mm 1.2mm steel Grip range (mm) 0.5-4.7 3.9-8.

5 Drill size (mm) 4.9 1.8mm S275 steel : 0.5mm steel System Accessories Fastener DF2-SS-LS-6.3 X 25 0.

7 Fastener Data continued Fastener Data continued DFT-SS-6.0 Range RTG-AA-5.2 Range stainless steel (304M) Aluminium Nominal lengths (mm) mm 1.2mm steel Grip range (mm) Drill size (mm) 5.3 TBC TBC RSH-AS-4.8 Range Sealed aluminium head with stainless steel mandrel Nominal lengths (mm) DF2-SS-LS-6.3 x 25 Grip range (mm) Drill size (mm) mm S275 steel : 0.5mm steel System Accessories Fastener DF2-SS-LS-6.3 X kn Drive sockets Image Details One piece drive socket for the installation of the DrillFast Stainless fasteners. Includes a retaining clip which holds the fastener during installation. Code: GREENDRIVE One piece drive socket for the installation of the DrillFast Stainless low profile pan head fasteners. Code: REDDRIVE 12 sales@fixfast.com Orderline:

8 Technical Notes Notes Fastener Data All dimensions are subject to manufacturing tolerances. Performance values are characteristic failure values and appropriate safety factors should be applied in any calculations using these values. Fastener Selection Recommended fastener lengths are calculated using standard tolerances for the fasteners and the combination of materials in the build-up. If there is distortion in the supporting construction, or other non-standard application detail, longer fasteners may be necessary than those shown. Always check the actual circumstances before deciding on a particular length. Further Assistance For any enquiry, or to discuss your requirements with someone knowledgeable, call the Fixfast customer service team on Full literature is available for the Fixfast range, or visit Other performance data may be available on request. For more unusual applications, tests can be carried out in our in-house technical centre to provide the necessary data. Site visits are also possible, particularly for pull-out performance into concrete, masonry or other variable substrates. Please ask for a Site Visit Request form if you think this service would be useful. CAD files of fasteners are available on request for inclusion in drawings. The information contained in this document is based on Fixfast s experience and experimentation, together with the specification details of the Bemo system. It is provided in good faith but Fixfast cannot be held liable for any errors. Because of the diversity of materials and site circumstances and the great number of possible applications, we cannot accept responsibility for any results obtained. Preliminary tests are always recommended to ensure the fasteners will perform as expected, and performance values should be approved by a qualified engineer. 14 sales@fixfast.com Orderline:

Fixfast Product Ranges Fastener Systems Adhesive Systems Roof Drainage Systems Rooftop Products Sealing Products Waterproofing Products Specialist Tools Ask for literature, or contact your

9 Fixfast Product Ranges Fastener Systems Adhesive Systems Roof Drainage Systems Rooftop Products Sealing Products Waterproofing Products Specialist Tools Ask for literature, or contact your Account Manager FIXFAST LTD Merlin House Seven Mile Lane Borough Green Sevenoaks Kent TN15 8QY Enquiries Orderline International +44 (0) Fax Certificate Number ISO 9001: 2008 ISO 14001: 2004 BS OHSAS 18001: 2007 Fixfast is a trading name of Fixfast Ltd which is a company registered in England & Wales with number The registered office is Fixfast, Merlin House, Seven Mile Lane, Borough Green, Sevenoaks, Kent, United Kingdom TN15 8QY FIXFAST LTD July 2015 Issue No 1:2

Fastener Selector Guide Standing seam systems

Fastener Selector Guide Standing seam systems Fastener Selector Guide Contents Products for specific applications Pages 3-8 Halter applications Fixing to steel or aluminium 0.5mm - 1.0mm thick Tri-Grip