Fastener and Sealant Selector Guide Trimo Insulated Panels - Qbiss One
|
|
- Benedict King
- 5 years ago
- Views:
Transcription
1 Fastener and Sealant Selector Guide Trimo Insulated Panels - Qbiss One
2 Trimo Qbiss One Fastener and Sealant Selector Guide Contents Products for specific applications Page 3-6 Technical data Page 7-8 Technical notes Page 9 Accessories Page Maximum reliability. Minimum fuss. 2
3 Qbiss One panel to steel mm Fixing Qbiss One panel: Primary fixing to cold rolled purlins or other light steel Use DrillFast Stainless DF3-SS-HT range fasteners. 8mm Hex head, use Fixfast GreenDrive. 8mm Application Panel Thickness (mm) Fastener Code 80 DF3-SS-HT-5.5 x DF3-SS-HT-5.5 x DF3-SS-HT-5.5 x 130 B System 150 DF3-SS-HT-5.5 x DF3-SS-HT-5.5 x DF3-SS-HT-5.5 x DF3-SS-HT-5.5 x 275 Application Panel Thickness (mm) Fastener Code 80 DF3-SS-5.5 x DF3-SS-HT-5.5 x DF3-SS-HT-5.5 x 110 F System 150 DF3-SS-HT-5.5 x DF3-SS-HT-5.5 x DF3-SS-HT-5.5 x DF3-SS-HT-5.5 x 225 sales@fixfast.com Orderline:
4 Trimo Qbiss One Qbiss One panel to steel mm Fixing Qbiss One panel: Primary fixing to hot rolled purlins or other heavy steel Use DrillFast Stainless DF12-SS-HT range fasteners. 8mm Hex head, use Fixfast GreenDrive. 8mm Application Panel Thickness (mm) Fastener Code 80 DF12-SS-HT-5.5 x DF12-SS-HT-5.5 x DF12-SS-HT-5.5 x 150 B System 150 DF12-SS-HT-5.5 x DF12-SS-HT-5.5 x DF12-SS-HT-5.5 x DF12-SS-HT-5.5 x 300 Application Panel Thickness (mm) Fastener Code 80 DF12-SS-5.5 x DF12-SS-HT-5.5 x DF12-SS-HT-5.5 x 115 F System 150 DF12-SS-HT-5.5 x DF12-SS-HT-5.5 x DF12-SS-HT-5.5 x DF12-SS-HT-5.5 x 250 4
5 Qbiss One panel to steel mm Fixing Qbiss One panel: Primary fixing to very heavy steel Use DrillFast Stainless DF25-SS-HT range fasteners. 8mm Hex head, use Fixfast GreenDrive. 8mm Application Panel Thickness (mm) Fastener Code 80 n/a 100 DF25-SS-HT-6.3 x DF25-SS-HT-6.3 x 225 B System 150 DF25-SS-HT-6.3 x DF25-SS-HT-6.3 x DF25-SS-HT-6.3 x DF25-SS-HT-6.3 x 325 Application Panel Thickness (mm) Fastener Code 80 n/a 100 DF25-SS-HT-6.3 x DF25-SS-HT-6.3 x 225 F System 150 DF25-SS-HT-6.3 x DF25-SS-HT-6.3 x DF25-SS-HT-6.3 x DF25-SS-HT-6.3 x 275 sales@fixfast.com Orderline:
6 Trimo Qbiss One Flashing / trim to Qbiss One panel skin Fixing Qbiss One panel: Fixing flashings, details and trim to outer skin of Qbiss One panels Use DrillFast Lacquered stitching fastener with bonded washer. Pan TX25 head, use Fixfast RedDrive. TX25 Substrate thickness (mm) Max 1.8 Fastener Code DF2-SS-PL-A x 25 + colour Use stainless steel sealed head lacquered rivet. Substrate thickness (mm) Max 1.8 Fastener Code RSH-AS-LAC-4.8 x 11 + colour Specify colour when ordering. All Qbiss One colours are available, but lead times may vary and minimum order quantities may apply. Please check with the Fixfast customer service team when placing your order. There are many variations on flashings and trims, and the Fixfast customer service team will be happy to discuss the requirements as needed. 6
7 Fastener Data DF3-SS-HT-5.5 Range Material Coating stainless steel (304M), with steel case hardened welded point Organic Drilling capacity Pull-out values (axial load resistance) 1.2mm 3.0mm steel Substrate 1.2mm steel 2.0mm steel 3.0mm steel Softwood 35mm embedment Characteristic Value 1.30 kn 2.62 kn 4.76 kn 3.57 kn DF12-SS-HT-5.5 Range Material Coating stainless steel (304M), with steel case hardened welded point Organic Drilling capacity Pull-out values (axial load resistance) 4.0mm 12.0mm steel Substrate 4.0mm steel 6.0mm steel 8.0mm steel 12.0mm steel Characteristic Value 2.80 kn 3.09 kn 6.89 kn 6.89 kn DF25-SS-HT-6.3 Range Material Coating stainless steel (304M), with steel case hardened welded point Organic Drilling capacity Pull-out values (axial load resistance) 8.0mm 25.0mm steel Substrate 8.0mm steel 12.0mm steel 25.0mm steel Characteristic Value kn kn kn Orderline:
8 Trimo Qbiss One Fastener Data DF2-SS-PL-6.3 x 25 Material Coating stainless steel (304M), with steel case hardened welded point Organic Drilling capacity 1.8mm steel Pull-out values (axial load resistance): Material 0.5mm steel Fastener DF2-SS-PL-6.3 x 25 Characteristic Value 0.60 kn RSH-AS-LAC-4.8 x 11 Material Aluminium with stainless steel mandrel Body diameter (mm) 4.8 Drill size (mm) 4.9 Head diameter (mm) 9.5 Rivet length (mm) 11.5 Mandrel diameter (mm) 2.6 Grip range max (mm) 6.4 Other sizes/specifications are available - please contact the Fixfast Customer Service Team for further assistance. 8
9 Technical Notes Fastener Data All dimensions are subject to manufacturing tolerances. Performance values are averaged ultimate failure values and appropriate safety factors should be applied in any calculations using these values. Fastener Selection Recommended fastener lengths are calculated using standard tolerances for the fasteners and the combination of materials in the build-up. If there is distortion in the supporting construction, or other non-standard application detail, longer fasteners may be necessary than those shown. Always check the actual circumstances before deciding on a particular length. Further Assistance For any enquiry, or to discuss your requirements with someone knowledgeable, call the Fixfast customer service team on Full literature is available for the Fixfast range, or visit Other performance data may be available on request. For more unusual applications, tests can be carried out in our in-house technical centre to provide the necessary data. Site visits are also possible, particularly for pull-out performance into concrete, masonry or other variable substrates. Please ask for a Site Visit Request form if you think this service would be useful. CAD files of fasteners are available on request for inclusion in drawings. The information contained in this document is based on the specification of the Trimo Qbiss One system and Fixfast s product data. It is provided in good faith but Fixfast cannot be held liable for any errors.performance is dependent on adherence to the conditions and instructions contained in Fixfast s Technical Data Sheets for the products shown. Performance values should be approved by a qualified engineer, and Fixfast recommend preliminary tests for any application where variation is possible in the materials or substrates involved. sales@fixfast.com Orderline:
10 Trimo Qbiss One Accessories Product Code Seelex BR Application Bedding and sealing flashings Product Code Application A-5 x 6 x 9.6 Sealing side laps Product Code HAND-FIREFOAM Application Foam cavity fill at ridge and junctions Product Code AD series pipe flashings Application Sealing around penetrations 10
11 Accessories GreenDrive One-piece drive socket for 8mm hex-head stainless steel fasteners, with retaining clip Product Code GREENDRIVE RedDrive One-piece recess drive socket for low-profile TX-25 drive fasteners, supports the head for easy accurate driving Product Code REDDRIVE Many other tools and accessories are available. Please see the current Fixfast Product Directory, go to or ask the Fixfast customer service team. Orderline:
12 Fixfast Product Ranges Fastener Systems Adhesive Systems Roof Drainage Systems Rooftop Products Height Safety and Access Systems Sealing Products Waterproofing Products Specialist Tools Ask for literature, or contact your Account Manager Printed using paper from well managed forests. FIXFAST LTD Merlin House Seven Mile Lane Borough Green Sevenoaks Kent TN15 8QY Enquiries Orderline International +44 (0) Fax Certificate Number ISO 9001: 2008 ISO 14001: 2004 BS OHSAS 18001: 2007 Fixfast is a trading name of Fixfast Ltd which is a company registered in England & Wales with number The registered office is Fixfast, Merlin House, Seven Mile Lane, Borough Green, Sevenoaks, Kent, United Kingdom TN15 8QY FIXFAST LTD June 2017 Issue No 1.5
Fastener and Sealant Selector Guide Kingspan BENCHMARK Roofliner
Fastener and Sealant Selector Guide Kingspan BENCHMARK Roofliner Kingspan BENCHMARK Roofliner Fastener and Sealant Selector Guide Contents Products for specific applications Page 3-7 Accessories Page 8
More informationFastener and Sealant Selector Guide Kingspan BENCHMARK Envirodek
Fastener and Sealant Selector Guide Fastener and Sealant Selector Guide Contents Products for specific applications Pages 3-7 Accessories Page 8 Technical data Page 9-12 Technical Notes Page 13 Maximum
More informationFastener Selector Guide Standing seam systems
Fastener Selector Guide Standing seam systems Fastener Selector Guide Contents Products for specific applications Pages 3-8 Halter applications Fixing to steel or aluminium 0.5mm - 1.0mm thick Tri-Grip
More informationFastener Selector Guide Bemo standing seam system
Fastener Selector Guide Bemo standing seam system Fastener Selector Guide Contents Products for specific applications Pages 4-9 Technical data Pages 10-13 Accessories Page 13 Technical notes Page 14 Bemo
More informationMaximum reliability. Minimum fuss. Selector Guide. BENCHMARK Roofliner. Kingspan. Fastener Systems and Sealing Products
Maximum reliability. Minimum fuss. Selector Guide BENCHMARK Roofliner Kingspan Fastener Systems and Sealing Products Contents Products for Specific Applications 3-7 Accessories 8 Technical Data 9-10 Technical
More informationTechnical Data. DrillFast Stainless DF3-SS-A4/316 Grade Standard fasteners. Stainless steel self-drilling fasteners for roofing and cladding
DrillFast Stainless DF3-SS-A4/316 Grade Standard fasteners Stainless steel self-drilling fasteners for roofing and cladding Application For mechanically fixing metal sheeting systems to light metal purlins
More informationTechnical Data. DrillFast Stainless DF12-SSA4 Standard Fasteners. Stainless steel self-drilling fasteners for roofing and cladding
DrillFast Stainless DF12-SSA4 Standard Fasteners Stainless steel self-drilling fasteners for roofing and cladding Application For mechanically fixing steel sheeting systems to heavy steel purlins and sections.
More informationSheet Steel Facts. Most common head design for self-drilling, self-tapping screws.
Sheet Steel Facts Fastener Guide for Sheet Steel Building Products August, 2003 Fastener Materials Fasteners are manufactured from several materials and coatings. For the purpose of this fact sheet, the
More information900 SERIES PANEL SHEET INDEX STAGGERED ENDLAP STAGGERED MALE LEG AT ENDLAP CONTINUOUS FEMALE ENDLAP INSTALLATION SEQUENCE CI-WR
900 SERIES PANEL CI-DS-01-900 CI-PJ-01-900 CI-PJ-02-900 CI-EL-01-900 CI-EL-02-900 CI-EL-03-900 CI-EL-04-900 CI-EL-05-900 CI-EL-06-900 CI-EL-07-900 CI-EL-08-900 CI-RD-01-900 CI-RD-02-900 CI-RD-03-900 CI-EV-01-900
More information900 SERIES WALL PANELS
CI-DS-01-900 CI-PP-01-900 CI-PJ-01-900 CI-PJ-02-900 CI-PJ-03-900 CI-BS-01-900 CI-BS-02-900 CI-BS-03-900 CI-BS-04-900 CI-BS-05-900 CI-OC-01-900 CI-OC-02-900 CI-IC-01-900 CI-FO-01-900 CI-FO-02-900 CI-FO-03-900
More informationGLOSSARY OF TERMS SECTION 8
GLOSSARY OF TERMS SECTION 8 Anchor Bolt Angle Base Plate Bay Blocking CCB Centerline Chord Cladding Clip Closure Strip An A-307 steel bolt embedded in the concrete footing to anchor the base plate of the
More informationSpeedDeck. Fixing and Handling Guide
SpeedDeck Section 1 Delivery/Storing On Site/Handling l SpeedDeck is factory or on-site manufactured. l Straight SpeedDeck bundles are a maximum 1 tonne, sheets nestled and banded with polypropylene or
More informationKS42 MF SERIES - HORIZONTAL INSTALLATION
CI-DS-01-KSMF H CI-PJ-01-KSMF H CI-PJ-02-KSMF H CI-PJ-03-KSMF H CI-PJ-04-KSMF H CI-PJ-05-KSMF H CI-PJ-06-KSMF H CI-PJ-07-KSMF H CI-PJ-08-KSMF H CI-PJ-09-KSMF H CI-PJ-10-KSMF H CI-PJ-11-KSMF H CI-PJ-12-KSMF
More informationVerge Flashing. Verge Flashing. Only use if flashings requirements can be site measured before ordering. Verge Clip
Tolerance Detail (recommended) Verge Closure Verge Channel Verge Clip Verge Flashing VERGE CHANNEL RIVETTED TO EUROSEAM AT APPROX 400MM CENTRES USING 4.8 X 12MM RIVETS. NB: DO NOT RIVET AT HALTER POSITION
More informationMetal Roof Installation Manual. Chapter 14: Fasteners
Metal Roof Installation Manual Chapter 14: Fasteners Chapter 14: Fasteners Chapter Contents 14. Introduction... 14-1 14.1 Fastener Parts and Installation... 14-1 14.1.1 Points... 14-1 14.1.2 Heads... 14-1
More informationThermoSpan EPS. Metalcraft COMMERCIAL ROOFING CREPS. Insulated Panel Systems DETAIL LIST
ThermoSpan EPS DETAIL LIST 00 / 15 COVER SHEET 01 / 15 RIDGE DETAIL 02 / 15 HEAD FLASHING DETAIL 03 / 15 EAVES GUTTER DETAIL 04 / 15 INSULATED GUTTER 05 / 15 INSULATED BOX GUTTER 06 / 15 BARGE CAPPING
More informationSPRINGLOK SPRINGLOK FLASHING SYSTEM PRODUCT BROCHURE ENGINEERED PRODUCT SYSTEMS
FLASHING SYSTEM ENGINEERED PRODUCT SYSTEMS PRODUCT BROCHURE 2 ND EDITION FLASHING SYSTEM FUNCTIONALLY UNIQUE. ENGINEERED PRODUCT SYSTEMS / FLASHING Fry Reglet comprehensive selection of moisture prevention
More informationDW HORIZONTAL INSTALLATION
AR-PJ-01-DW2H 2" HORIZONTAL PANEL JOINT AR-PJ-02-DW2H 2" VERTICAL PANEL JOINT AR-PJ-03-DW2H 3" HORIZONTAL PANEL JOINT AR-PJ-04-DW2H 3" VERTICAL PANEL JOINT AR-PJ-05-DW2H CUSTOM REVEAL AR-PJ-06-DW2H DW-2000S
More informationSpeedZip. Fixing and Handling Guide
Section 1 Delivery/Storing On Site/Handling l SpeedZip is factory or on-site manufactured. l Straight SpeedZip bundles are a maximum 1 tonne, 2 No. sheets nestled and then and placed face to face, banded
More informationKS SERIES - VERTICAL INSTALLATION
CS-DS-01-KSV CS DISCLAIMER CS-PJ-01-KSV KS42SL EXPANDED PANEL JOINT CS-PJ-02-KSV KS42SL ENGAGED PANEL JOINT CS-PJ-03-KSV KS45SL EXPANDED PANEL JOINT CS-PJ-04-KSV KS45 FLAT ENGAGED PANEL JOINT CS-PJ-05-KSV
More informationALUMINUM PIPE GUIDERAIL 01/01/
NOTES PIPE RAILING & POSTS: Structural Tube, Pipe and Bar shall be in accordance with ASTM B22 or ASTM B429, Alloy 606-T6. End Rail 90 bends and corner bends with maximum 4-0" post spacing, may be Alloy
More information4 LYSAGHT Product Catalogue Disclaimer, warranties and limitation of liability
isclaimer, warranties and limitation of liability This publication is intended to be an aid for all trades and professionals involved with specifying and installing products and not to be a substitute
More informationROSKO FASTENERS & SUPPLY, INC FASTENERS FOR CONSTRUCTION
406 Bell Court Woodstock, GA 30188 www.roskofasteners.com A Customer-Conscious Company OUR MISSION At Rosko Fasteners & Supply we are committed to the profitability of our customers. We consider our customers
More informationTABLE OF CONTENTS A. PBR
TABLE OF CONTENTS A. PBR Panel 1. PBR Panel Architect/Engineer Information....................................... 2 2. PBR Panel UL 90 Requirements............................................... 3 3. PBR
More informationTalk to us, THE SMART ROOF PEOPLE Visit or Global Roofing Solutions Brownbuilt
Talk to us, THE SMART ROOF PEOPLE Visit www.globalroofs.co.za or email info@globalroofs.co.za Global Roofing Solutions Brownbuilt Typical specification Materials The roofing / side cladding shall be Brownbuilt
More informationFASTENERS QUIKDRILL QUIKGRIP CLIPSCREWS. Value through the Roof.
FASTENERS QUIKDRILL QUIKGRIP CLIPSCREWS Value through the Roof. METAL-TO-METAL FASTENERS for CANADA QUIKDRILL METAL2METAL Value through the Roof. Reliable Self-Drilling Performance. Superior Marco Value.
More informationTABLE OF CONTENTS A-1
TABLE OF CONTENTS PAGE NUMBER: DETAIL DESCRIPTION A-1...TABLE OF CONTENTS A-2...GENERAL NOTES B-1...GENERAL INFORMATION C-1...EAVE DRIP DETAIL C-2...EAVE DRIP with GUTTER DETAIL C-3 & C-4...FIXED RIDGE
More information400 SERIES VERTICAL INSTALLATION
CI-DS-01-400V CI-PJ-01-400V CI-PJ-02-400V CI-PJ-03-400V CI-BS-01-400V CI-BS-02-400V CI-BS-03-400V CI-BS-04-400V CI-BS-05-400V CI-OC-01-400V CI-OC-02-400V CI-IC-01-400V CI-IC-02-400V CI-FO-01-400V CI-FO-02-400V
More informationRoll-Fix Kit The complete dry hip kit RFIG
H I P Roll-Fix Kit The complete dry hip kit RFIG.045-0906-1 Roll-Fix is a quick and simple dry-fix roofing kit for hips. l Quick and easy to install no special tools required l Universal application fits
More informationSection 914. JOINT AND WATERPROOFING MATERIALS
914.01 Section 914. JOINT AND WATERPROOFING MATERIALS 914.01. General Requirements. Joint and waterproofing material for use in concrete construction must meet the requirements of this section. 914.02.
More informationFastener Design. Fastener Materials. Coated Corrosion-Resistant Fasteners. Metal Alloy Capped Fasteners
Threaded fasteners for roofing and siding systems are available in a wide range of materials, designs, and coatings. When specifying your fastener, be sure to choose one that has a performance life equaling
More informationThe Roofing Store TRS 9 35MM 78MM 150MM 78MM PRODUCT TECHNICAL DATA
TRS 9 35MM 78MM 150MM 78MM THICKNESS END SPAN INTERNAL SPAN MINIMUM PITCH 0.55MM 2.30M 3.20M 3 DESCRIPTION TRS 9 profile is designed for commercial and industrial roofing. The profile is suitable for low
More informationCFDTT-01. Control Joint Study (General)
Trim Method Classic Method Notes: Control joints are required and should be located by the designer at the following locations on the construction documents: 144 sf (13.4 sm) is the maximum overall area
More informationPRICE LIST - 6th February 2017
W: www.cladco.co.uk E: info@cladco.co.uk T: 01837 659901 F: 01837 659902 Cladco Profiles North Road Industrial Estate, North Road, Okehampton, Devon, EX20 1BQ. PRICE LIST - 6th February 2017 Colour coated
More informationSecuAnch Roof Anchor System
Height Safety Products Email: marketing@fallprotec.com SecuAnch Roof Anchor System 1 Presentation The SecuAnch lifeline is designed to be permanently installed on buildings and other structures where maintenance
More informationSTEEL PIPE GUIDERAIL 01/01/
NOTES PIPE RAILING & POSTS: Pipe Rails and s shall be in accordance with ASTM A5 Grade B for standard weight pipe and ASTM A500 Grade B, C or D or ASTM A50 for structural tube. Bars for handrail supports
More informationisd dunaferr Product catalogue
isd dunaferr Product catalogue HOT-DIP GALVANIZED PRODUCTS The base material of hot-dip galvanizing is cold rolled wide coil. Metal coating is performed in course of continuous hot-dip galvanizing Sendzimir
More informationCSS Central Mount System
CSS-20 Installation Manual CSS-20 Safety Notifications Below are the installation instructions for the CSS-20-2 Long Span Beam Mounting System. Please read these safety notifications prior to beginning
More informationREGAL. Installation Manual
REGAL Installation Manual General Information The details shown on the following pages are suggestions or guidelines for installing the Regal system. The installation details shown here are proven methods
More informationICC-ES Evaluation Report Reissued September 1, 2012 This report is subject to renewal September 1, 2013.
ICC-ES Evaluation Report www.icc-es.org (800) 423-6587 (562) 699-0543 ESR-1790 Reissued September 1, 2012 This report is subject to renewal September 1, 2013. A Subsidiary of the International Code Council
More informationInstallation Guide. Step 3. Valley Flashing. Step 7. Transition Flashings and Accessories. Step 6. Hip and Ridge Installation
Step 7. Transition s and Accessories Step 3. Valley Step 6. Hip and Ridge Installation Step 2. Rake Trim Step 5. Installing the Shingles Step 1. Eave Starter Installation Step 4. Endwall s Installation
More informationInstallation Instructions
Installation Instructions Alpha SolarSmart On Roof Kits for the Installation of Alpha Solar Collectors onto Tile and Slate Type Roofs For Technical help or for Service call... ALPHA HELPLINE Tel: 0 77
More informationCembrit Patina. Cembrit Cover. Cembrit Solid. Cembrit Transparent
Rainscreen Cladding Your choice. In addition to the range of colours and shades, Cembrit cladding boards are available in four compositions, each with distinctive performance and characteristics. Cembrit
More informationMETAL-TO-METAL FASTENERS QUIKDRILL METAL2METAL METAL2METAL HD. Value through the Roof.
METAL-TO-METAL FASTENERS QUIKDRILL METAL2METAL METAL2METAL HD Value through the Roof. Reliable Self-Drilling Performance. Superior Marco Value. Value drives everything we do. That s why our exclusive Weather-Tite
More informationSystem for 2+ Level Buildings
Issued Sept 205 Contact Info@symonite.co.nz System for 2+ Level Buildings Typical Details Issued: September 205 TYPICAL DETAILS CONTENTS.0 TYPICAL VERTICAL JOINTS 2.0 EXT. CORNER / TYPICAL HORIZONTAL JOINT
More informationMULE-HIDE PRODUCTS CO., INC FASTENER GUIDELINES
FASTENER GUIDELINES Fastener Overview A. Mule-Hide offers a variety of fasteners and plates to: Attach roof insulation Attach mechanically fastened roofing membranes Secure All Purpose Bar and termination
More informationInstallation guide for 20/20
Introduction The following installation instructions are recommended minimum requirements for the 20/20. The designer and fixer should ensure that tiles are installed in accordance with BS 5534; The British
More informationFastening material. Lindab 1. General information and theory 2. Safe 3. Silencers 4. Dampers & Measure units 5. Fire dampers & Smoke evacuation
Fastening material Lindab General information and theory Safe Silencers Dampers & Measure units Fire dampers & Smoke evacuation Air valves Roof hoods Other circular products Transfer 0 Rectangular Flexible
More informationAIA Specification. Section Slate Shingles PART 1 GENERAL
AIA Specification Section 07315 Slate Shingles PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationInsulated Corrugated. Patio Installation Guide. SupaCore Insulation Superior Thermal Performance. Colorbond Steel Roof & Ceiling. InsulRoof roof panel
Using the slot on the Turn-up/Turn-down tool, place the tool into the steel sheeting InsulRoof roof panel Rivet fixing through flashing Insulated Corrugated Roof pan turned down - gutter en 100mm Gutter
More informationP SERIES. and MASON CORPORATION
P SERIES CATAL ALOG Carpor ports and Patio Cover ers Corporate Office 123 Oxmoor Road West Birmingham, AL 35209 P.O. Box 59226 Birmingham, AL 35259-9226 Telephone: 1/800/868-4100 Fax: (205) 945-4304 Mason-Columbia
More informationInstallation Instructions Student 101 Fume Cupboard
Installation Instructions Student 101 Fume Cupboard Refer drawing on next page 0. If your fume cupboard is supplied with a flatpack bench frame, see step1. If your fume cupboard will be mounted on an existing
More informationTremLock T-138 INSTALLATION MANUAL T-138 www.tremcoroofing.com 3735 Green Road Beachwood, Ohio 44122 1.800.852.6013 50 Beth Nealson Drive Toronto, Ontario M4H 1M6 1.800.668.9879 7241 6/8/18 TABLE OF CONTENTS
More informationInstallation Instructions
For Medium (15-18.5K) + Heavy duty (22-28.5K) Air Conditioner READ BEFORE INSTALLING UNIT To avoid risk of personal injury, property damage, or product damage due to the weight of this device and sharp
More informationExtrusions GB-3-IN01. Updated: Scale: REV: - This Drawing is Protected by Copyright Altus NZ Ltd.
Extrusions Updated: N/A Scale: N.T.S REV: - Dwg Dwg Revision Rev No Description Description Date GB-3-IN01 Index Page - - - - - GB-3-001 Extrusions - - - - - GB-3-002 Extrusions - - - - - GB-3-003 Extrusions
More informationSECTION SHEET METAL FLASHING AND TRIM
SECTION 07620 SHEET METAL FLASHING AND TRIM PART 1 GENERAL 1.1 SUMMARY A. Section includes flashings and counterflashings, sheet metal roofing and fabricated sheet metal items, as indicated in Schedule.
More informationRoof fastener. Perfectly thought out for every roof
Roof fastener Perfectly thought out for every roof 1 Welcome to the world of clever solutions Solutions for every roof In our production areas we produce all needed components for the sub construction
More informationORP-R1 Mini/Regular: Basic / J-Connection / M-Connection
ORP-R1 Mini/Regular: Basic / / Construction Manual Thank you for purchasing our product. The indication symbols in this construction manual are for you to construct the product safely and properly and
More informationSECTION SHEET METAL FLASHING AND TRIM
SECTION 07620 PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Formed roof drainage sheet metal fabrications. 2. Formed low-slope roof sheet metal fabrications. 1.2 SUBMITTALS A. Shop Drawings: Show
More informationREAD BEFORE INSTALLING UNIT INSTALLATION WARNINGS AND CAUTION
edium + Heavy duty READ BEFORE INSTALLING UNIT INSTALLATION WARNINGS AND CAUTION Carefully read the installation manual before beginning. Pay attention to danger and safety notices. be exposed: Carefully
More informationFlushglaze For Framed Openings and Horizontal Panels. Window System Installation Guide
Flushglaze 4500 For Framed Openings and Horizontal Panels Window System Installation Guide January 2017 BENCHMRK Welcome to Kingspan, global leaders in the design and manufacture of insulated metal panels
More informationInstallation Instructions
edium + Heavy duty READ BEFORE INSTALLING UNIT Preliminary instructions: 1. Check window opening size: the mounting parts furnished with this air conditioner are made to install in a wooden sill double-hung
More informationTech Sheet. T4 Interior conversion kit how to - fitting instructions. 1. Rear seat belts. 2.
Page 1 of 8 T4 Interior conversion kit how to - fitting instructions Thank you for purchasing our T4 interior conversion kit. This kit will enable you to convert any SWB left hand loading door T4 into
More informationFischerTHERM plusdach The Sandwichelement with the special something
The Sandwichelement with the special something Contents Page General Product Range 4 Fasteners 5 Secure fastening 7 Assembly 8 9 Details 0 References 4-5 FischerProfil 05 FischerTHERM plusdach The first
More informationCare Instruction: Wash vehicle roof prior to installing Rhino Tracks.
Important: Please read these instructions carefully prior to installation. Please refer to your fitting instruction to ensure that the roof racks are installed in the correct locations. Check the contents
More informationInstallation Guide. for Ampelite Industrial Sheeting STD. Premium Industrial Sheeting. Industrial Grade Fibreglass. Industrial Grade Fibreglass
Installation Guide for Ampelite Industrial Sheeting Premium Industrial Sheeting STD Industrial Grade Fibreglass Industrial Grade Fibreglass Industrial Grade Fibreglass AS/NZS ISO 9002 Licence QEC 4787
More informationDW VERTICAL INSTALLATION
AR-PJ-01-DW5V AR-PJ-02-DW5V AR-PJ-03-DW5V AR-PJ-04-DW5V AR-BS-01-DW5V AR-BS-02-DW5V AR-OC-01-DW5V AR-OC-02-DW5V AR-OC-03-DW5V AR-IC-01-DW5V AR-IC-02-DW5V AR-IC-03-DW5V AR-FO-01-DW5V AR-FO-02-DW5V AR-FO-03-DW5V
More informationDRYSTAND INSTALLATION MANUAL
DRYSTAND INSTALLATION MANUAL WWW.ROOFSCREEN.COM Toll Free 866 766 3727 Introduction... 2 This manual... 2 Application... 2 System Overview... 2 Components... 2 Round Post Supports (BS50)... 2 Telescoping
More informationFASTENERS C O M P AT I B L E W I T H F E R O T I E S Y S T E M S. Which FERO Tie Systems Require Fasteners?
FASTENERS C O M P AT I B L E W I T H F E R O T I E S Y S T E M S Which FERO Tie Systems Require Fasteners? Structural Actions: Fastener,, or Both? With the exception of FERO tie systems that are directly
More informationINTEX Millwork Solutions SECTION EXTERIOR PVC PERGOLAS (IBC Compliant)
SECTION 066030 EXTERIOR PVC PERGOLAS (IBC Compliant) PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and other Contract Documents, listed in the agreement between the Owner and Contractor, apply to
More informationINSTALLATION GUIDE WOOD PIVOTING CIRCLE/ OVAL
WOOD PIVOTING CIRCLE/ OVAL READ SPECIFIC INSTALLATION INSTRUCTIONS COMPLETELY BEFORE STARTING ANY INSTALLATION Failure to install and maintain our product according to these instructions will VOID any
More informationBest Materials LLC distributes backer rod, caulking and sealants for all types of EIFS joints and penetration sealing applications.
Best Materials LLC distributes backer rod, caulking and sealants for all types of EIFS joints and penetration sealing applications. EXTERIOR INSULATION & FINISH SYSTEM CONSTRUCTION Data Published Courtesy
More informationC.00. Ullrich Aluminium Co. Ltd. Ulltraclad Aluminium Cladding September Wall Batten Elevation. Horizontal battens between verticals at soffit
Horizontal battens between verticals at soffit 2 C.04 600 600 600 600 Cavity batten at 600 mm centres 1 C.03 Batten fixing points 1 C.04 1 C.07 1 C.12 1 C.13 1 C.14 Meter Box Window 1 C.08 1 C.09 800 800
More informationConstruction details: Master-C type profiles and joints:
Construction details: Master-C type profiles and joints: Master-C 3g 32 mm. (1 1/4 ) 1000 mm. (39 3/8 ) outer face inner face 10.5 fixing details: sealing washers shall be installed through a 2-3/8 x 1-9/16
More informationUL Construction No. 254
UL Construction No. Wind-Uplift - Class 90 (See Item No. ) / Fire Not Investigated Metal Roof Deck Panels* Snap-Clad No. MSG or No. MSG min. thickness coated steel panels. Panels in. wide max., 0 in. wide
More information50948-RHN Putney. 06 January This document includes: Aluminium strip/ sheet coverings/ flashings 1. Code Section Revision Dated
50948-RHN Putney 06 January 2018 This document includes: Code Section Revision Dated H72 Aluminium strip/ sheet coverings/ flashings 1 Table of Contents Title H72 Aluminium strip/ sheet coverings/ flashings
More informationTECHNICAL GUIDE BEONSTONE PANELIZED STONE SIDING
TECHNICAL GUIDE BEONSTONE PANELIZED STONE SIDING TABLE OF CONTENTS This installation guide provides detailed step-by-step instructions for do-it-yourself projects. We invite you to read it carefully and
More informationUlltraclad Aluminium Cladding. Contents. 1.0 General Information Design Information Installation Information 7. 4.
Ulltraclad Aluminium Cladding Contents 1.0 General Information 2 2.0 Design Information 4 3.0 Installation Information 7 4.0 Maintenance 10 5.0 Health & Safety 10 1 1.0 General Information 1.1 Introduction
More informationPRODUCT EVALUATION Effective July 1, 2009 RC-204
TEXAS DEPARTMENT OF INSURANCE Engineering Services / MC 103-3A 333 Guadalupe Street P.O. Box 149104 Austin, Texas 78714-9104 Phone No. (512) 322-2212 Fax No. (512) 463-6693 PRODUCT EVALUATION Effective
More informationDIRECT FASTENING SYSTEMS. Hilti. Outperform. Outlast.
DIRECT FASTENING SYSTEMS. Hilti. Outperform. Outlast. Powder-Actuated Tools and Fasteners DX - Light Tools DX 460-F8 Page 140 DX 460 MX Page 141 Consumables X-U, X-C, X-FS, X-HS U, X-M, X-EM Page 142 Insulation
More informationMETAL-TO-WOOD FASTENERS QUIKGRIP METAL2WOOD METAL2WOOD HD METAL2WOOD XD LOPRO 300SS. Value through the Roof.
METAL-TO-WOOD FASTENERS QUIKGRIP METAL2WOOD METAL2WOOD HD METAL2WOOD XD LOPRO 300SS Value through the Roof. Proven Performance. Huge Selection. Marco Quality. Value drives everything we do. That s why
More informationICOPAL SP1 CLAMPING RING OUTLET
V1.2 ICOPAL SP1 CLAMPING RING OUTLET For use with Icopal Single-Ply Membranes Monarplan PVC, Sureplan FPO and Universal POCB CONTENTS CONTENTS... 1 OVERVIEW... 2 PREPARATION... 4 WARM DECK ROOFS ICOPAL
More informationINSTALLATION SHOP DRAWINGS FOR MINNEAPOLIS, MN
MINNEAPOLIS, MN 2-0- 2-- General Notes Abbreviations Deviations from Architectural Specifications Deviations from Architectural Drawings ALUM. = ALUMINUM B.O. = BY OTHERS CONT. = CONTINUOUS. = CLEARANCE
More informationFaçade CUT-TO-SIZE FAÇADE STRIPS APPLICATION IN OVERLAP ON WOODEN SUPPORTING STRUCTURE APPLICATION INSTRUCTIONS 1 1. GENERAL
Façade CUT-TO-SIZE FAÇADE STRIPS APPLICATION IN OVERLAP ON WOODEN SUPPORTING STRUCTURE APPLICATION INSTRUCTIONS 1 1. GENERAL These application instructions are specifically intended for the fastening of
More informationTable of Contents. Notes to Designer/User Map of Typical Roof Conditions Fastener Placement Fastener Selection...
Table of Contents Section Page Notes to Designer/User... 2-3 Map of Typical Roof Conditions... 4 Fastener Placement... 5 Fastener Selection... 6 Ridge/Hip Flashing... 7 Valley Flashing... 8 Eave Flashings...
More informationGlobal Roofing Solutions Klip-Lok 406 Aluminium
GRS Klip-Lok 406 Global Roofing Solutions Klip-Lok 406 Aluminium www.globalroofs.co.za marketing@globalroofs.co.za GRS Klip-Lok 406 GRS Klip-Lok 406 Alum. 09/18 Typical Specification Materials The roofing
More information5/16" Flange nut. Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc plated bolt w/ washers and nut. Anchor 3" sq. 7 Ga.
2 1/2" x 2 1/2" x 10 Ga. 6" 5" 4" Variable Slipbase (8" Sq. SYS.) 5/16 Corner Bolt W/ nut 5/16" Flange nut Stub Insert (8" Sq. SYS.) Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc
More informationEuro-Tray Roll Cap. Specific Profile Data Sheet BACK. Table of Contents. Technical Drawing File Downloads
Specific Profile Data Sheet 1 Technical Drawing formats available AutoDesk DWG Format AutoDesk RVT Format PDF Format Euro-Tray Roll Cap Table of Contents General Profile Information 2 Material Specifications
More informationSHEET METAL FLASHING AND TRIM Christ on the Mountain
SECTION 076200 - SHEET METAL FLASHING AND TRIM PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Compatibly with the bumping of flashings and trim as identified in the Membrane Roofing Section 075000.
More informationTrapezoidal Roof KS1000 RW Installation Guide
Insulated Roof & Wall Panels UK & Republic of Ireland Trapezoidal Roof KS1000 RW Installation Guide Multiple Panels Eaves to Ridge 150mm End Lap September 2018 Trapezoidal Roof KS1000 RW Components Trapezoidal
More informationInstallation Instructions
For Medium (15-18.5K) + Heavy duty (-8.5K) Air Conditioner READ BEFORE INSTALLING UNIT To avoid risk of personal injury, property damage, or product damage due to the weight of this device and sharp edges
More informationFor. Metal Roofing. Cement Roofing. Metal Framing & Fixing. Concrete Fixing
Metal To Metal Fixing Calcium Silicate Boards Metal To wood Fasteners For Concrete Metal Roofing & Cladding For Metal Roofing Fixing AHU & Ventilators Doors & Window Framing Cement Roofing Metal Framing
More informationInclined Roof System Trimoterm SNV
Inclined Roof System Trimoterm SNV Inclined Roof System Trimoterm SNV - Technical Document EN Version 6 July 2016 TABLE OF CONTENTS 1 Technical Description of Roof System Trimoterm SNV 1 1.1 General 1
More informationTHERMO-FIT REPLACEMENT WINDOW INSTALLATION INSTRUCTIONS (BRICKMOULD / NO NAILING FLANGE)
THERMO-FIT REPLACEMENT WINDOW INSTALLATION INSTRUCTIONS (BRICKMOULD / NO NAILING FLANGE) fig.3 Casement, Awning, Fixed Casement, Direct-Set, Double-Hung, Single-Hung & Horizontal Slider Windows Materials
More informationKlip-Lok 406 Aluminium
Klip-Lok 406 Alumin GRS Klip-Lok 406 Global Roofing Solutions TM Klip-Lok 406 Aluminium Talk to THE SMART ROOF PEOPLE Visit www.globalroofs.co.za or email info@globalroofs.co.za GRS Klip-Lok 406 GRS Klip-Lok
More information#14 ¾" A 5 #14 1" A 5 #14 1-½" A 5 #17 1" AB 3 #14 ¾" A 3 #14 1" A 3 #14 1½" A 3
ACCESSORIES SELF-TAPPING CARBON STEEL #14 ¾" A 5 16" 13.2# 81.00 95.25 #14 1" A 5 16" 17.0# 94.90 109.15 #14 1-½" A 5 16" 21.0# 110.80 125.05 #17 1" AB 5 16" 16.0# 158.25 172.50 when using this type of
More informationBarofor Round System (polyester coated) Panels, Posts, Accessories
1 Scope This Technical Data Sheet specifies the requirements for the Barofor Round System. The complete system exists of: Panels Posts Accessories such as fixation system and posts caps. Panels and posts
More informationDura-Lock Roof System
DLR-14 Dura-Lock Roof System Assembly and Installation Instructions Read the instructions before starting the job. They explain the steps required to produce a finished product that will meet factory specifications.
More informationElcometer Conical Mandrel Bend Tester
English Elcometer 1510 Conical Mandrel Bend Tester Operating Instructions English is a registered trademark of Elcometer Instruments Ltd. All other trademarks acknowledged. Copyright Elcometer Instruments
More informationORP-F1 Regular: Basic / J-Connection / M-Connection
D636 ORP-F Regular: Basic / J-Connection / M-Connection Construction Manual Thank you for purchasing our product. The indication symbols in this construction manual are for you to construct the product
More information