Fastener and Sealant Selector Guide Kingspan BENCHMARK Roofliner

Size: px
Start display at page:

Download "Fastener and Sealant Selector Guide Kingspan BENCHMARK Roofliner"

Transcription

1 Fastener and Sealant Selector Guide Kingspan BENCHMARK Roofliner

2 Kingspan BENCHMARK Roofliner Fastener and Sealant Selector Guide Contents Products for specific applications Page 3-7 Accessories Page 8 Fastener data Page 9-10 Technical Notes Page 11 Maximum reliability. Minimum fuss. 2

3 Kingspan BENCHMARK Roofliner to steel mm Roofliner: Primary fixing to cold rolled steel. Use DrillFast stainless steel low profile high thread fasteners. Low profile TX25 head, use Fixfast RedDrive. Panel Thickness Fastener Code 80mm DF3-SS-P-HT-SFW-5.5 x mm DF3-SS-P-HT-SFW-5.5 x mm DF3-SS-P-HT-SFW-5.5 x mm DF3-SS-P-HT-SFW-5.5 x 240 For fixing panels back to timber, please contact Fixfast Customer Service team on mm DF3-SS-P-HT-SFW-5.5 x mm DF3-SS-P-HT-SFW-5.5 x mm Please enquire for details Kingspan BENCHMARK Roofliner to steel mm Roofliner: Primary fixing to hot rolled steel. Use DrillFast stainless steel high thread fasteners. 8mm hex head, use Fixfast GreenDrive. For fixing panels back to timber, please contact Fixfast Customer Service team on Panel Thickness 80mm 100mm 125mm 150mm 175mm 200mm 220mm Fastener Code DF12-SS-HT-5.5 x 150 (with SP-40-DD plate) DF12-SS-HT-5.5 x 150 (with SP-40-DD plate) DF12-SS-HT-5.5 x 200 (with SP-40-DD plate) DF12-SS-HT-5.5 x 200 (with SP-40-DD plate) DF12-SS-HT-5.5 x 250 (with SP-40-DD plate) DF12-SS-HT-5.5 x 250 (with SP-40-DD plate) DF12-SS-HT-5.5 x 300 (with SP-40-DD plate) sales@fixfast.com Orderline:

4 Kingspan BENCHMARK Roofliner Kingspan BENCHMARK Roofliner to steel mm Roofliner: Primary fixing to hot rolled steel. Use DrillFast stainless steel high thread fasteners. 8mm hex head, use Fixfast GreenDrive. For fixing panels back to timber, please contact Fixfast Customer Service team on Panel Thickness 80mm 100mm 125mm 150mm 175mm 200mm 220mm Fastener Code Please enquire for details DF25-SS-HT-5.5 x 225 (with SP-40-DD plate) DF25-SS-HT-5.5 x 225 (with SP-40-DD plate) DF25-SS-HT-5.5 x 225 (with SP-40-DD plate) DF25-SS-HT-5.5 x 275 (with SP-40-DD plate) DF25-SS-HT-5.5 x 275 (with SP-40-DD plate) DF25-SS-HT-5.5 x 325 (with SP-40-DD plate) 4

5 Flashing / trim to panel skin Roofliner: Fixing for metal flashing to panel. Use DrillFast lacquered stitching fastener with bonded washer. Low profile TX25 head, use Fixfast RedDrive Fastener Code DF2-SS-PL-A x 25 + colour Flashing / trim to panel skin Roofliner: Fixing for metal flashing to panel. Use DrillFast lacquered wafer head fastener. Wafer head, 2-PP drive. Fastener Code DF3-SS-CF-L-4.8 x 25 + colour Specify colour when ordering. All Kingspan colours are available, but lead times may vary and minimum order quantities may apply. Please check with the Fixfast customer service team when placing your order. There are many variations on flashings and trims, and the Fixfast customer service team will be happy to discuss the requirements as needed. sales@fixfast.com Orderline:

6 Kingspan BENCHMARK Roofliner Kingspan BENCHMARK Roofliner Sealants Roofliner: Air sealant. Use Seelex BR gun grade solvent release bedding sealant Sealant Code SEELEX BR Kingspan BENCHMARK Roofliner Sealants Roofliner: Vapour sealant. Use Seelex BR gun grade solvent release bedding sealant Sealant Code SEELEX BR Kingspan BENCHMARK Roofliner Sealants Roofliner: PVC foam tape for all internal air sealing. Use PVC foam air sealing tape Sealant Code Thickness x Width (mm) Roll length (m) Box Quantity AST-20 x 6 x x

7 Kingspan BENCHMARK Roofliner Sealants Roofliner: External face sealant. Use Foilband foil faced strip sealant Sealant Code Roll length (m) Roll width (mm) Colour Box Quantity FOILBAND Silver foil on white 10 butyl FOILBAND Kingspan BENCHMARK Roofliner Sealants Roofliner: Fire resistant construction foam for filling ridge and hip gaps. Use FIREFOAM-B1 Sealant Code Cartridge size (ml) Box Quantity FIREFOAM-B1-GUN FIREFOAM-B1-HAND sales@fixfast.com Orderline:

8 Kingspan BENCHMARK Roofliner Accessories GreenDrive One-piece drive socket for 8mm hex-head stainless steel fasteners, with retaining clip Product Code GREENDRIVE RedDrive One-piece recess drive socket for low-profile TX-25 drive fasteners, supports the head for easy accurate driving Product Code REDDRIVE Many other tools and accessories are available. Please see the current Fixfast Product Directory, go to or ask the Fixfast customer service team. 8

9 Fastener Data DF3-SS-P-HT-SFW-5.5 Range Material Coating stainless steel (304M), with steel case hardened welded point, A2 stainless steel plate Organic Drilling capacity Pull-out values (axial load resistance) 1.2mm 3.0mm steel Substrate 1.2mm steel 2.0mm steel 3.0mm steel Softwood 35mm embedment Characteristic Value 1.30 kn 2.62 kn 4.76 kn 3.57 kn DF12-SS-HT-5.5 Range Material Coating stainless steel (304M), with steel case hardened welded point Organic Drilling capacity Pull-out values (axial load resistance) 4.0mm 12.0mm steel Substrate 4.0mm steel 6.0mm steel 8.0mm steel 12.0mm steel Characteristic Value 2.08 kn 3.09 kn 6.89 kn 6.89 kn DF25-SS-HT-6.3 Range Material Coating stainless steel (304M), with steel case hardened welded point Organic Drilling capacity Pull-out values (axial load resistance) 8.0mm 25.0mm steel Substrate 8.0mm steel 12.0mm steel 25.0mm steel Characteristic Value kn kn kn Orderline:

10 Kingspan BENCHMARK Roofliner Fastener Data DF2-SS-PL-6.3 x 25 Material Coating stainless steel (304M), with steel case hardened welded point Organic Drilling capacity 1.8mm steel Pull-out values (axial load resistance): Material 0.5mm steel Fastener DF2-SS-P(L)-6.3 X 25 Characteristic Value 0.60 kn DF3-SS-CF-L-4.8 x 25 Material Coating stainless steel (304M), with steel case hardened welded point Organic Drilling capacity Pull-out values (axial load resistance) mm steel Substrate 1.2mm steel 2.0mm steel 3.0mm steel Characteristic Value 1.12 kn 2.19 kn 4.10 kn 10

11 Technical Notes Fastener Data All dimensions are subject to manufacturing tolerances. Performance values are averaged ultimate failure values and appropriate safety factors should be applied in any calculations using these values. Fastener Selection Recommended fastener lengths are calculated using standard tolerances for the fasteners and the combination of materials in the build-up. If there is distortion in the supporting construction, or other non-standard application detail, longer fasteners may be necessary than those shown. Always check the actual circumstances before deciding on a particular length. Further Assistance For any enquiry, or to discuss your requirements with someone knowledgeable, call the Fixfast customer service team on Full literature is available for the Fixfast range, or visit Other performance data may be available on request. For more unusual applications, tests can be carried out in our in-house technical centre to provide the necessary data. Site visits are also possible, particularly for pull-out performance into concrete, masonry or other variable substrates. Please ask for a Site Visit Request form if you think this service would be useful. CAD files of fasteners are available on request for inclusion in drawings. The information contained in this document is based on the specification of the Kingspan BENCHMARK Roofliner system and Fixfast s product data. It is provided in good faith but Fixfast cannot be held liable for any errors.performance is dependent on adherence to the conditions and instructions contained in Fixfast s Technical Data Sheets for the products shown. Performance values should be approved by a qualified engineer, and Fixfast recommend preliminary tests for any application where variation is possible in the materials or substrates involved. sales@fixfast.com Orderline:

12 Fixfast Product Ranges Fastener Systems Adhesive Systems Roof Drainage Systems Rooftop Products Height Safety and Access Systems Sealing Products Waterproofing Products Specialist Tools FIXFAST LTD Merlin House Seven Mile Lane Borough Green Sevenoaks Kent TN15 8QY Enquiries International +44 (0) Fax Certificate Number ISO 9001: 2008 ISO 14001: 2004 BS OHSAS 18001: 2007 Fixfast is a trading name of Fixfast Ltd which is a company registered in England & Wales with number The registered office is Fixfast, Merlin House, Seven Mile Lane, Borough Green, Sevenoaks, Kent, United Kingdom TN15 8QY FIXFAST LTD June 2017 Issue No 1:3

Maximum reliability. Minimum fuss. Selector Guide. BENCHMARK Roofliner. Kingspan. Fastener Systems and Sealing Products

Maximum reliability. Minimum fuss. Selector Guide. BENCHMARK Roofliner. Kingspan. Fastener Systems and Sealing Products Maximum reliability. Minimum fuss. Selector Guide BENCHMARK Roofliner Kingspan Fastener Systems and Sealing Products Contents Products for Specific Applications 3-7 Accessories 8 Technical Data 9-10 Technical

More information

Fastener and Sealant Selector Guide Kingspan BENCHMARK Envirodek

Fastener and Sealant Selector Guide Kingspan BENCHMARK Envirodek Fastener and Sealant Selector Guide Fastener and Sealant Selector Guide Contents Products for specific applications Pages 3-7 Accessories Page 8 Technical data Page 9-12 Technical Notes Page 13 Maximum

More information

Fastener and Sealant Selector Guide Trimo Insulated Panels - Qbiss One

Fastener and Sealant Selector Guide Trimo Insulated Panels - Qbiss One Fastener and Sealant Selector Guide Trimo Insulated Panels - Qbiss One Trimo Qbiss One Fastener and Sealant Selector Guide Contents Products for specific applications Page 3-6 Technical data Page 7-8 Technical

More information

Fastener Selector Guide Standing seam systems

Fastener Selector Guide Standing seam systems Fastener Selector Guide Standing seam systems Fastener Selector Guide Contents Products for specific applications Pages 3-8 Halter applications Fixing to steel or aluminium 0.5mm - 1.0mm thick Tri-Grip

More information

Fastener Selector Guide Bemo standing seam system

Fastener Selector Guide Bemo standing seam system Fastener Selector Guide Bemo standing seam system Fastener Selector Guide Contents Products for specific applications Pages 4-9 Technical data Pages 10-13 Accessories Page 13 Technical notes Page 14 Bemo

More information

Technical Data. DrillFast Stainless DF3-SS-A4/316 Grade Standard fasteners. Stainless steel self-drilling fasteners for roofing and cladding

Technical Data. DrillFast Stainless DF3-SS-A4/316 Grade Standard fasteners. Stainless steel self-drilling fasteners for roofing and cladding DrillFast Stainless DF3-SS-A4/316 Grade Standard fasteners Stainless steel self-drilling fasteners for roofing and cladding Application For mechanically fixing metal sheeting systems to light metal purlins

More information

Technical Data. DrillFast Stainless DF12-SSA4 Standard Fasteners. Stainless steel self-drilling fasteners for roofing and cladding

Technical Data. DrillFast Stainless DF12-SSA4 Standard Fasteners. Stainless steel self-drilling fasteners for roofing and cladding DrillFast Stainless DF12-SSA4 Standard Fasteners Stainless steel self-drilling fasteners for roofing and cladding Application For mechanically fixing steel sheeting systems to heavy steel purlins and sections.

More information

Sheet Steel Facts. Most common head design for self-drilling, self-tapping screws.

Sheet Steel Facts. Most common head design for self-drilling, self-tapping screws. Sheet Steel Facts Fastener Guide for Sheet Steel Building Products August, 2003 Fastener Materials Fasteners are manufactured from several materials and coatings. For the purpose of this fact sheet, the

More information

900 SERIES WALL PANELS

900 SERIES WALL PANELS CI-DS-01-900 CI-PP-01-900 CI-PJ-01-900 CI-PJ-02-900 CI-PJ-03-900 CI-BS-01-900 CI-BS-02-900 CI-BS-03-900 CI-BS-04-900 CI-BS-05-900 CI-OC-01-900 CI-OC-02-900 CI-IC-01-900 CI-FO-01-900 CI-FO-02-900 CI-FO-03-900

More information

Roll-Fix Kit The complete dry hip kit RFIG

Roll-Fix Kit The complete dry hip kit RFIG H I P Roll-Fix Kit The complete dry hip kit RFIG.045-0906-1 Roll-Fix is a quick and simple dry-fix roofing kit for hips. l Quick and easy to install no special tools required l Universal application fits

More information

900 SERIES PANEL SHEET INDEX STAGGERED ENDLAP STAGGERED MALE LEG AT ENDLAP CONTINUOUS FEMALE ENDLAP INSTALLATION SEQUENCE CI-WR

900 SERIES PANEL SHEET INDEX STAGGERED ENDLAP STAGGERED MALE LEG AT ENDLAP CONTINUOUS FEMALE ENDLAP INSTALLATION SEQUENCE CI-WR 900 SERIES PANEL CI-DS-01-900 CI-PJ-01-900 CI-PJ-02-900 CI-EL-01-900 CI-EL-02-900 CI-EL-03-900 CI-EL-04-900 CI-EL-05-900 CI-EL-06-900 CI-EL-07-900 CI-EL-08-900 CI-RD-01-900 CI-RD-02-900 CI-RD-03-900 CI-EV-01-900

More information

Trapezoidal Roof KS1000 RW Installation Guide

Trapezoidal Roof KS1000 RW Installation Guide Insulated Roof & Wall Panels UK & Republic of Ireland Trapezoidal Roof KS1000 RW Installation Guide Multiple Panels Eaves to Ridge 150mm End Lap September 2018 Trapezoidal Roof KS1000 RW Components Trapezoidal

More information

DW HORIZONTAL INSTALLATION

DW HORIZONTAL INSTALLATION AR-PJ-01-DW2H 2" HORIZONTAL PANEL JOINT AR-PJ-02-DW2H 2" VERTICAL PANEL JOINT AR-PJ-03-DW2H 3" HORIZONTAL PANEL JOINT AR-PJ-04-DW2H 3" VERTICAL PANEL JOINT AR-PJ-05-DW2H CUSTOM REVEAL AR-PJ-06-DW2H DW-2000S

More information

KS42 MF SERIES - HORIZONTAL INSTALLATION

KS42 MF SERIES - HORIZONTAL INSTALLATION CI-DS-01-KSMF H CI-PJ-01-KSMF H CI-PJ-02-KSMF H CI-PJ-03-KSMF H CI-PJ-04-KSMF H CI-PJ-05-KSMF H CI-PJ-06-KSMF H CI-PJ-07-KSMF H CI-PJ-08-KSMF H CI-PJ-09-KSMF H CI-PJ-10-KSMF H CI-PJ-11-KSMF H CI-PJ-12-KSMF

More information

KS SERIES - VERTICAL INSTALLATION

KS SERIES - VERTICAL INSTALLATION CS-DS-01-KSV CS DISCLAIMER CS-PJ-01-KSV KS42SL EXPANDED PANEL JOINT CS-PJ-02-KSV KS42SL ENGAGED PANEL JOINT CS-PJ-03-KSV KS45SL EXPANDED PANEL JOINT CS-PJ-04-KSV KS45 FLAT ENGAGED PANEL JOINT CS-PJ-05-KSV

More information

DW VERTICAL INSTALLATION

DW VERTICAL INSTALLATION AR-PJ-01-DW5V AR-PJ-02-DW5V AR-PJ-03-DW5V AR-PJ-04-DW5V AR-BS-01-DW5V AR-BS-02-DW5V AR-OC-01-DW5V AR-OC-02-DW5V AR-OC-03-DW5V AR-IC-01-DW5V AR-IC-02-DW5V AR-IC-03-DW5V AR-FO-01-DW5V AR-FO-02-DW5V AR-FO-03-DW5V

More information

ICOPAL SP1 CLAMPING RING OUTLET

ICOPAL SP1 CLAMPING RING OUTLET V1.2 ICOPAL SP1 CLAMPING RING OUTLET For use with Icopal Single-Ply Membranes Monarplan PVC, Sureplan FPO and Universal POCB CONTENTS CONTENTS... 1 OVERVIEW... 2 PREPARATION... 4 WARM DECK ROOFS ICOPAL

More information

PRICE LIST - 6th February 2017

PRICE LIST - 6th February 2017 W: www.cladco.co.uk E: info@cladco.co.uk T: 01837 659901 F: 01837 659902 Cladco Profiles North Road Industrial Estate, North Road, Okehampton, Devon, EX20 1BQ. PRICE LIST - 6th February 2017 Colour coated

More information

Installation Guide Contemporary Alfresco V1.3 LU

Installation Guide Contemporary Alfresco V1.3 LU Installation Guide Contemporary Alfresco V1.3 LU 010818 Tools Required Below is a list of tools that you will require to install you're the Contemporary Alfresco System. Cordless Drill Mastic Gun Spirit

More information

Installation Guide Simplicity Alfresco. V1.9 Lu070318

Installation Guide Simplicity Alfresco. V1.9 Lu070318 0333 305 5272 www.canoports.co.uk Installation Guide Simplicity Alfresco V1.9 Lu070318 Tools Required Below is a list of tools that you will require to install your the Simplicity Alfresco System. Cordless

More information

FASTENERS QUIKDRILL QUIKGRIP CLIPSCREWS. Value through the Roof.

FASTENERS QUIKDRILL QUIKGRIP CLIPSCREWS. Value through the Roof. FASTENERS QUIKDRILL QUIKGRIP CLIPSCREWS Value through the Roof. METAL-TO-METAL FASTENERS for CANADA QUIKDRILL METAL2METAL Value through the Roof. Reliable Self-Drilling Performance. Superior Marco Value.

More information

400 SERIES VERTICAL INSTALLATION

400 SERIES VERTICAL INSTALLATION CI-DS-01-400V CI-PJ-01-400V CI-PJ-02-400V CI-PJ-03-400V CI-BS-01-400V CI-BS-02-400V CI-BS-03-400V CI-BS-04-400V CI-BS-05-400V CI-OC-01-400V CI-OC-02-400V CI-IC-01-400V CI-IC-02-400V CI-FO-01-400V CI-FO-02-400V

More information

SpeedDeck. Fixing and Handling Guide

SpeedDeck. Fixing and Handling Guide SpeedDeck Section 1 Delivery/Storing On Site/Handling l SpeedDeck is factory or on-site manufactured. l Straight SpeedDeck bundles are a maximum 1 tonne, sheets nestled and banded with polypropylene or

More information

Instructions for Installation on a Pitched Roof LIGHTWAY optical tube LW 260, LW 320, LW 520, LW 760

Instructions for Installation on a Pitched Roof LIGHTWAY optical tube LW 260, LW 320, LW 520, LW 760 Lightway, s.r.o. Registered office: Ledvinova 1714, 149 00 Praha 4 Offices: Za Humny 1054/4a, 161 00 Praha 6 tel.: 235 300 694, fax: 235 300 218 Company ID No.: 63669366, Tax ID No.: CZ63669366 Bank: KB

More information

Section 914. JOINT AND WATERPROOFING MATERIALS

Section 914. JOINT AND WATERPROOFING MATERIALS 914.01 Section 914. JOINT AND WATERPROOFING MATERIALS 914.01. General Requirements. Joint and waterproofing material for use in concrete construction must meet the requirements of this section. 914.02.

More information

ALUMINUM PIPE GUIDERAIL 01/01/

ALUMINUM PIPE GUIDERAIL 01/01/ NOTES PIPE RAILING & POSTS: Structural Tube, Pipe and Bar shall be in accordance with ASTM B22 or ASTM B429, Alloy 606-T6. End Rail 90 bends and corner bends with maximum 4-0" post spacing, may be Alloy

More information

STEEL PIPE GUIDERAIL 01/01/

STEEL PIPE GUIDERAIL 01/01/ NOTES PIPE RAILING & POSTS: Pipe Rails and s shall be in accordance with ASTM A5 Grade B for standard weight pipe and ASTM A500 Grade B, C or D or ASTM A50 for structural tube. Bars for handrail supports

More information

For. Metal Roofing. Cement Roofing. Metal Framing & Fixing. Concrete Fixing

For.   Metal Roofing. Cement Roofing. Metal Framing & Fixing. Concrete Fixing Metal To Metal Fixing Calcium Silicate Boards Metal To wood Fasteners For Concrete Metal Roofing & Cladding For Metal Roofing Fixing AHU & Ventilators Doors & Window Framing Cement Roofing Metal Framing

More information

50948-RHN Putney. 06 January This document includes: Aluminium strip/ sheet coverings/ flashings 1. Code Section Revision Dated

50948-RHN Putney. 06 January This document includes: Aluminium strip/ sheet coverings/ flashings 1. Code Section Revision Dated 50948-RHN Putney 06 January 2018 This document includes: Code Section Revision Dated H72 Aluminium strip/ sheet coverings/ flashings 1 Table of Contents Title H72 Aluminium strip/ sheet coverings/ flashings

More information

The Leka System Installation Guide

The Leka System Installation Guide Installation Guide The Leka System Installation Guide The following guide has been created to assist in the fabrication and installation of the Leka System. Please note that each roof is individual and

More information

4 LYSAGHT Product Catalogue Disclaimer, warranties and limitation of liability

4 LYSAGHT Product Catalogue Disclaimer, warranties and limitation of liability isclaimer, warranties and limitation of liability This publication is intended to be an aid for all trades and professionals involved with specifying and installing products and not to be a substitute

More information

Flushglaze For Framed Openings and Horizontal Panels. Window System Installation Guide

Flushglaze For Framed Openings and Horizontal Panels. Window System Installation Guide Flushglaze 4500 For Framed Openings and Horizontal Panels Window System Installation Guide January 2017 BENCHMRK Welcome to Kingspan, global leaders in the design and manufacture of insulated metal panels

More information

Installation Instructions

Installation Instructions For Medium (15-18.5K) + Heavy duty (22-28.5K) Air Conditioner READ BEFORE INSTALLING UNIT To avoid risk of personal injury, property damage, or product damage due to the weight of this device and sharp

More information

isd dunaferr Product catalogue

isd dunaferr Product catalogue isd dunaferr Product catalogue HOT-DIP GALVANIZED PRODUCTS The base material of hot-dip galvanizing is cold rolled wide coil. Metal coating is performed in course of continuous hot-dip galvanizing Sendzimir

More information

SECTION SHEET METAL FLASHING AND TRIM

SECTION SHEET METAL FLASHING AND TRIM SECTION 07620 PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Formed roof drainage sheet metal fabrications. 2. Formed low-slope roof sheet metal fabrications. 1.2 SUBMITTALS A. Shop Drawings: Show

More information

READ BEFORE INSTALLING UNIT INSTALLATION WARNINGS AND CAUTION

READ BEFORE INSTALLING UNIT INSTALLATION WARNINGS AND CAUTION edium + Heavy duty READ BEFORE INSTALLING UNIT INSTALLATION WARNINGS AND CAUTION Carefully read the installation manual before beginning. Pay attention to danger and safety notices. be exposed: Carefully

More information

Installation Instructions

Installation Instructions edium + Heavy duty READ BEFORE INSTALLING UNIT Preliminary instructions: 1. Check window opening size: the mounting parts furnished with this air conditioner are made to install in a wooden sill double-hung

More information

Installation Guide. Evolve bi-fold. 8. Door restrictor- optional p9. 1. Before you start p2. 9. Adjustment. 2. Measuring and surveying p2

Installation Guide. Evolve bi-fold. 8. Door restrictor- optional p9. 1. Before you start p2. 9. Adjustment. 2. Measuring and surveying p2 Evolve bi-fold Installation Guide 1. Before you start p2 8. Door restrictor- optional p9 2. Measuring and surveying p2 3. Configuration details p4 4. Installation p5 5. Glazing p5 6. Glazing packer details

More information

AIA Specification. Section Slate Shingles PART 1 GENERAL

AIA Specification. Section Slate Shingles PART 1 GENERAL AIA Specification Section 07315 Slate Shingles PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification

More information

Care Instruction: Wash vehicle roof prior to installing Rhino Tracks.

Care Instruction: Wash vehicle roof prior to installing Rhino Tracks. Important: Please read these instructions carefully prior to installation. Please refer to your fitting instruction to ensure that the roof racks are installed in the correct locations. Check the contents

More information

manthorpe Roll-Out Dry Fix Ridge System building products Fixing Instructions MBP 8265e

manthorpe Roll-Out Dry Fix Ridge System building products Fixing Instructions MBP 8265e manthorpe building products Roll-Out Dry Fix Ridge System Fixing Instructions MBP 8265e Ridge Details Fig A. Assembly View of Dry Ridge Detail s/s screw clamping plate rubber washer foam spacer ridge tile

More information

TABLE OF CONTENTS A-1

TABLE OF CONTENTS A-1 TABLE OF CONTENTS PAGE NUMBER: DETAIL DESCRIPTION A-1...TABLE OF CONTENTS A-2...GENERAL NOTES B-1...GENERAL INFORMATION C-1...EAVE DRIP DETAIL C-2...EAVE DRIP with GUTTER DETAIL C-3 & C-4...FIXED RIDGE

More information

Metal Roof Installation Manual. Chapter 14: Fasteners

Metal Roof Installation Manual. Chapter 14: Fasteners Metal Roof Installation Manual Chapter 14: Fasteners Chapter 14: Fasteners Chapter Contents 14. Introduction... 14-1 14.1 Fastener Parts and Installation... 14-1 14.1.1 Points... 14-1 14.1.2 Heads... 14-1

More information

Series Sloped glazed Curtain wall. Installation Instructions

Series Sloped glazed Curtain wall. Installation Instructions Series 5600 Sloped glazed Curtain wall Installation Instructions Part NO. Y308 February 2013 SECTION TABLE OF CONTENTS PAGE I. General Notes & Guidelines. 3-4 II. Gutter and Mullion Assembly.. 5 III. End

More information

Fastener Design. Fastener Materials. Coated Corrosion-Resistant Fasteners. Metal Alloy Capped Fasteners

Fastener Design. Fastener Materials. Coated Corrosion-Resistant Fasteners. Metal Alloy Capped Fasteners Threaded fasteners for roofing and siding systems are available in a wide range of materials, designs, and coatings. When specifying your fastener, be sure to choose one that has a performance life equaling

More information

Installation Guide Simplicity 16. V2.9 Lu171117

Installation Guide Simplicity 16. V2.9 Lu171117 0845 869 6006 www.canoports.co.uk Installation Guide Simplicity 16 V2.9 Lu171117 Tools Required Below is a list of tools that you will require to install the Simplicity 16 Canopy or Carport. Cordless Drill

More information

Wilks and Dek-King are registered trade marks of Wilks (Rubber Plastics) Mfgs Co Ltd.

Wilks and Dek-King are registered trade marks of Wilks (Rubber Plastics) Mfgs Co Ltd. Fitting Guide: Rigid PVC Fendering & Stainless Steel Insert Woodrolfe Road Tollesbury Essex CM9 8RY England Tel: +44 (0)1621 869609 Fax: +44 (0)1621 868863 Email: sales@wilks.co.uk Web: Version: 12.1 Wilks

More information

TECHNICAL GUIDE BEONSTONE PANELIZED STONE SIDING

TECHNICAL GUIDE BEONSTONE PANELIZED STONE SIDING TECHNICAL GUIDE BEONSTONE PANELIZED STONE SIDING TABLE OF CONTENTS This installation guide provides detailed step-by-step instructions for do-it-yourself projects. We invite you to read it carefully and

More information

How To Install Windows: Nail-Fin Application

How To Install Windows: Nail-Fin Application How To Install Windows: Nail-Fin Application Required Tools & Materials: Materials: 1 3/4" galvanized roofing nails. Nails must penetrate at least 1" into framing For mulled and/or DP50 or above units:

More information

Skypod. Pitched PVC-U skylights. Installation guide PITCHED PVC-U SKYLIGHTS ISSUE 1

Skypod. Pitched PVC-U skylights. Installation guide PITCHED PVC-U SKYLIGHTS ISSUE 1 Skypod Pitched PVC-U skylights PITCHED PVC-U SKYLIGHTS Installation guide ISSUE 1 Skypod pitched PVC-U skylights Installation guide Contents 1. Surveying 3 2. Installation 4 3. Additional information 10

More information

Ulltraclad Aluminium Cladding. Contents. 1.0 General Information Design Information Installation Information 7. 4.

Ulltraclad Aluminium Cladding. Contents. 1.0 General Information Design Information Installation Information 7. 4. Ulltraclad Aluminium Cladding Contents 1.0 General Information 2 2.0 Design Information 4 3.0 Installation Information 7 4.0 Maintenance 10 5.0 Health & Safety 10 1 1.0 General Information 1.1 Introduction

More information

Skypod. Pitched PVC-U skylights. Installation guide PITCHED PVC-U SKYLIGHTS ISSUE 1

Skypod. Pitched PVC-U skylights. Installation guide PITCHED PVC-U SKYLIGHTS ISSUE 1 Skypod Pitched PVC-U skylights PITCHED PVC-U SKYLIGHTS Installation guide ISSUE 1 Skypod pitched PVC-U skylights Installation guide 1. Surveying Before unpacking the Skypod roof, review the supplied layout

More information

CFDTT-01. Control Joint Study (General)

CFDTT-01. Control Joint Study (General) Trim Method Classic Method Notes: Control joints are required and should be located by the designer at the following locations on the construction documents: 144 sf (13.4 sm) is the maximum overall area

More information

TABLE OF CONTENTS A. PBR

TABLE OF CONTENTS A. PBR TABLE OF CONTENTS A. PBR Panel 1. PBR Panel Architect/Engineer Information....................................... 2 2. PBR Panel UL 90 Requirements............................................... 3 3. PBR

More information

Specialty Fastening Systems Solutions for the Construction Industry

Specialty Fastening Systems Solutions for the Construction Industry Specialty Fastening Systems Solutions for the Construction Industry BI-METAL SCREWS Drywall / Denseglass SELF DRILLING SCREWS IN STAINLESS STEEL SUS304 Steel Framing Exterior Sheathing Plank / Panel Sidings

More information

SecuAnch Roof Anchor System

SecuAnch Roof Anchor System Height Safety Products Email: marketing@fallprotec.com SecuAnch Roof Anchor System 1 Presentation The SecuAnch lifeline is designed to be permanently installed on buildings and other structures where maintenance

More information

SPOTFAST FASTENERS BULLETIN

SPOTFAST FASTENERS BULLETIN BULLETIN SF 1115 Allows permanent joining in metal to metal and metal to PCB/plastic panels Alternative to riveting and spot welding. No special installation equipment required. Flush or sub-flush on both

More information

SpeedZip. Fixing and Handling Guide

SpeedZip. Fixing and Handling Guide Section 1 Delivery/Storing On Site/Handling l SpeedZip is factory or on-site manufactured. l Straight SpeedZip bundles are a maximum 1 tonne, 2 No. sheets nestled and then and placed face to face, banded

More information

DOCK WEDGE - STANDARD

DOCK WEDGE - STANDARD DOCK WEDGE - STANDARD INSTALLATION INSTRUCTIONS WOOD HEADER READ ALL INSTRUCTIONS BEFORE INSTALLING SEAL. SUPER SEAL MFG. LTD. WILL NOT BE HELD RESPONSIBLE FOR IMPROPER INSTALLATION OF ANCHORING DEVICES,

More information

Installation guide for 20/20

Installation guide for 20/20 Introduction The following installation instructions are recommended minimum requirements for the 20/20. The designer and fixer should ensure that tiles are installed in accordance with BS 5534; The British

More information

Verge Flashing. Verge Flashing. Only use if flashings requirements can be site measured before ordering. Verge Clip

Verge Flashing. Verge Flashing. Only use if flashings requirements can be site measured before ordering. Verge Clip Tolerance Detail (recommended) Verge Closure Verge Channel Verge Clip Verge Flashing VERGE CHANNEL RIVETTED TO EUROSEAM AT APPROX 400MM CENTRES USING 4.8 X 12MM RIVETS. NB: DO NOT RIVET AT HALTER POSITION

More information

Installation Instructions

Installation Instructions Installation Instructions Alpha SolarSmart On Roof Kits for the Installation of Alpha Solar Collectors onto Tile and Slate Type Roofs For Technical help or for Service call... ALPHA HELPLINE Tel: 0 77

More information

MULTI-STORY FIRE STOPPING ASSEMBLY FRAMED OPENING JAMB (LOW CELL) INDEX SHEET

MULTI-STORY FIRE STOPPING ASSEMBLY FRAMED OPENING JAMB (LOW CELL) INDEX SHEET KPH-DS-01-MTLV KPH-PP-01-MTLV KPH-PP-02-MTLV KPH-PJ-01-MTLV KPH-PJ-02-MTLV KPH-PJ-03-MTLV KPH-PJ-04-MTLV KPH-PJ-05-MTLV KPH-FS-01-MTLV KPH-FS-02-MTLV KPH-FS-03-MTLV KPH-BS-01-MTLV KPH-BS-02-MTLV KPH-BS-03-MTLV

More information

ThermoSpan EPS. Metalcraft COMMERCIAL ROOFING CREPS. Insulated Panel Systems DETAIL LIST

ThermoSpan EPS. Metalcraft COMMERCIAL ROOFING CREPS. Insulated Panel Systems DETAIL LIST ThermoSpan EPS DETAIL LIST 00 / 15 COVER SHEET 01 / 15 RIDGE DETAIL 02 / 15 HEAD FLASHING DETAIL 03 / 15 EAVES GUTTER DETAIL 04 / 15 INSULATED GUTTER 05 / 15 INSULATED BOX GUTTER 06 / 15 BARGE CAPPING

More information

PV SLATE ROOF INSTALLATION GUIDE

PV SLATE ROOF INSTALLATION GUIDE The PV Slate roof tile is designed to integrate into a roof clad with either natural or imitation slates. Initial Roof Batten Layout. The roof should be battened using 50x25mm batten at a spacing of 270mm.

More information

ALUMINIUM SOLAR MOUNTING SYSTEM. Components catalogue FOR ALL TYPES OF ROOFS AND SITES

ALUMINIUM SOLAR MOUNTING SYSTEM. Components catalogue FOR ALL TYPES OF ROOFS AND SITES Components catalogue MOUNTING RAILS CARRIERS FOR RAILS FASTENERS BOLTS AND NUTS CLIPS FLAT ROOFS STRUCTURES FREE FIELD SYSTEMS COMPLEX ROOFS SYSTEMS ALUMINIUM SOLAR MOUNTING SYSTEM FOR ALL TYPES OF ROOFS

More information

GLOSSARY OF TERMS SECTION 8

GLOSSARY OF TERMS SECTION 8 GLOSSARY OF TERMS SECTION 8 Anchor Bolt Angle Base Plate Bay Blocking CCB Centerline Chord Cladding Clip Closure Strip An A-307 steel bolt embedded in the concrete footing to anchor the base plate of the

More information

Specifications. Model

Specifications. Model KS500/1000 ZIP/Zero ODP/LPCB Standing Seam Roof System Standard External and Internal Environments Aluminium External / Steel Liner - LPS Grade EXT-B NBS Format Specification H43 - Metal Composite Panel

More information

Installation Guide. Step 3. Valley Flashing. Step 7. Transition Flashings and Accessories. Step 6. Hip and Ridge Installation

Installation Guide.   Step 3. Valley Flashing. Step 7. Transition Flashings and Accessories. Step 6. Hip and Ridge Installation Step 7. Transition s and Accessories Step 3. Valley Step 6. Hip and Ridge Installation Step 2. Rake Trim Step 5. Installing the Shingles Step 1. Eave Starter Installation Step 4. Endwall s Installation

More information

Roof Mount Ground Mount Specialised Clamps Spares Application Notes

Roof Mount Ground Mount Specialised Clamps Spares Application Notes DPA Solar Racking Solutions Solar PV Racking Catalogue Roof Mount Ground Mount Specialised Clamps Spares Application Notes www.dpasolar.com.au 1300 447 500 Rails & Splices Page 3 Mid & End Clamps Page

More information

40mm Thermoclick. Type II Class 1 Clear Satin Anodize - 201R1 (Mid Grade Commercial)

40mm Thermoclick.  Type II Class 1 Clear Satin Anodize - 201R1 (Mid Grade Commercial) http://www.sundancesupply.com 40mm Thermoclick Type II Class 1 Clear Satin Anodize - 201R1 (Mid Grade Commercial) U-Profile 12' Lengths $39 Out System offers a complete set of extrusions and accessories

More information

SEAL PLATE SP4413 VERTICAL SP4414 1"[25] VERT. PANEL JTS. 1/2"[13] INTERM. SPLICES DESIGN LOADS AND SLAB EDGE DISTANCES. 1 2 NOM.

SEAL PLATE SP4413 VERTICAL SP4414 1[25] VERT. PANEL JTS. 1/2[13] INTERM. SPLICES DESIGN LOADS AND SLAB EDGE DISTANCES. 1 2 NOM. 3 COL 5 16GA. ANGLE SP4413 VERTICAL SEE SUPPORT DRAINGS 1 7/16 SEAL PLATE @ VERT. JNT 1/2 [13] Ă DETAILER NOTE OPTIONAL INSULATION HEN REQUIRED. OF SEAL PLATE PANEL MODULE 2.500 FROM SHELF OF TR. TO TOP

More information

SECTION ROUGH CARPENTRY

SECTION ROUGH CARPENTRY SECTION 06 10 00- ROUGH CARPENTRY PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including Contracting Requirements and Division 1 Specification Sections, apply

More information

Care Instruction: Wash vehicle roof prior to installing Rhino Tracks.

Care Instruction: Wash vehicle roof prior to installing Rhino Tracks. Important: Please read these instructions carefully prior to installation. Please refer to your fitting instruction to ensure that the roof racks are installed in the correct locations. Check the contents

More information

Barofor Round System (polyester coated) Panels, Posts, Accessories

Barofor Round System (polyester coated) Panels, Posts, Accessories 1 Scope This Technical Data Sheet specifies the requirements for the Barofor Round System. The complete system exists of: Panels Posts Accessories such as fixation system and posts caps. Panels and posts

More information

Hilti HIT-1 / HIT-1 CE Adhesive Anchor System

Hilti HIT-1 / HIT-1 CE Adhesive Anchor System Concrete Hilti HIT-1 / HIT-1 CE Adhesive Anchor System Injection mortar system Benefits Hilti HIT-1 / HIT-1 CE 300 ml foil tube cartridge Mixer HIT PM HIT-V rods Dispenser: - chemical injection fastening

More information

Installation Instructions Stainless Steel Wall Panels

Installation Instructions Stainless Steel Wall Panels Please read all instructions before installing wall panels. Always plan before you place! 1. Before installation: a. Acclimate Stain Steel Panels, Trim, adhesives and wall substrates to room temperature

More information

CERTIFICATE OF APPROVAL No CF 581 CGI INTERNATIONAL LIMITED

CERTIFICATE OF APPROVAL No CF 581 CGI INTERNATIONAL LIMITED CERTIFICATE OF APPROVAL No CF 581 This is to certify that, in accordance with TS General Requirements for Certification of Fire Protection Products The undermentioned products of International House, Millfield

More information

FASTENERS. Specialist in Hi-Tensile & Mild Steel

FASTENERS. Specialist in Hi-Tensile & Mild Steel FASTENERS Specialist in Hi-Tensile & Mild Steel Fasteners Business Established in 2003, Karamtara's Fasteners business vertical provides truly global services. We provide special industrial fasteners to

More information

SHEET METAL FLASHING AND TRIM Christ on the Mountain

SHEET METAL FLASHING AND TRIM Christ on the Mountain SECTION 076200 - SHEET METAL FLASHING AND TRIM PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Compatibly with the bumping of flashings and trim as identified in the Membrane Roofing Section 075000.

More information

SPRINGLOK SPRINGLOK FLASHING SYSTEM PRODUCT BROCHURE ENGINEERED PRODUCT SYSTEMS

SPRINGLOK SPRINGLOK FLASHING SYSTEM PRODUCT BROCHURE ENGINEERED PRODUCT SYSTEMS FLASHING SYSTEM ENGINEERED PRODUCT SYSTEMS PRODUCT BROCHURE 2 ND EDITION FLASHING SYSTEM FUNCTIONALLY UNIQUE. ENGINEERED PRODUCT SYSTEMS / FLASHING Fry Reglet comprehensive selection of moisture prevention

More information

The Roofing Store TRS 9 35MM 78MM 150MM 78MM PRODUCT TECHNICAL DATA

The Roofing Store TRS 9 35MM 78MM 150MM 78MM PRODUCT TECHNICAL DATA TRS 9 35MM 78MM 150MM 78MM THICKNESS END SPAN INTERNAL SPAN MINIMUM PITCH 0.55MM 2.30M 3.20M 3 DESCRIPTION TRS 9 profile is designed for commercial and industrial roofing. The profile is suitable for low

More information

INSTALLATION MANUAL STORAGE

INSTALLATION MANUAL STORAGE IMVersion 1.1 INSTALLATION MANUAL GENERAL GUIDE: The information in this IM is intended to serve as a general guide to proper installation with no warranties intended or implied. Prime Panels assumes no

More information

VENTED GABLE DETAIL ROOF PANEL GABLE FLASHING 24" C/C MAX. BUTYL SEALANT TAPE ROOF PURLIN FLASH AB-1, AB-2, AB-3, OR AB-4

VENTED GABLE DETAIL ROOF PANEL GABLE FLASHING 24 C/C MAX. BUTYL SEALANT TAPE ROOF PURLIN FLASH AB-1, AB-2, AB-3, OR AB-4 ROOF PANEL GABLE FLASHING FASTENER @ 24" C/C MAX. ROOF PURLIN BUTYL SEALANT TAPE FLASH AB-1, AB-2, AB-3, OR AB-4 FASTENER @ EVERY MAJOR RIB OR 12" C/C MAX. F-J TRIM FABRAL ALUMINUM SOFFIT FASTENER 24"

More information

TENANT IMPROVEMENT 16 FEBRUARY WEST 27TH STREET, 4TH FLOOR 100% CD OWNER/BID ADD 1-03/08/2018

TENANT IMPROVEMENT 16 FEBRUARY WEST 27TH STREET, 4TH FLOOR 100% CD OWNER/BID ADD 1-03/08/2018 SECTION 055000 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply

More information

Installation Instructions Student 101 Fume Cupboard

Installation Instructions Student 101 Fume Cupboard Installation Instructions Student 101 Fume Cupboard Refer drawing on next page 0. If your fume cupboard is supplied with a flatpack bench frame, see step1. If your fume cupboard will be mounted on an existing

More information

Tech Sheet. T4 Interior conversion kit how to - fitting instructions. 1. Rear seat belts. 2.

Tech Sheet. T4 Interior conversion kit how to - fitting instructions. 1. Rear seat belts. 2. Page 1 of 8 T4 Interior conversion kit how to - fitting instructions Thank you for purchasing our T4 interior conversion kit. This kit will enable you to convert any SWB left hand loading door T4 into

More information

CERACLAD.

CERACLAD. CERACLAD 4. Horizontal Application (Wood Structure) Instructions and Details Siding Panel Installation Accessories Installation Overview Starter Bar Installation Install s Installation

More information

Price list Connectors for floor reinforcement

Price list Connectors for floor reinforcement Price list 2018 Connectors for floor reinforcement 01-01-2018 Shear Connector With Crampons with a 50x50x4 mm base plate - screws Ø 8 mm Diameter x length CTLB 020 12 X 020 0,17 2,31 CTLB 030 12 X 030

More information

FT DIX ELEMENTARY SCHOOL PHASE VII, CLASSROOM ADDITION PEMBERTON TOWNSHIP REGAN YOUNG ENGLAND BUTERA, PC PROJECT #5349A

FT DIX ELEMENTARY SCHOOL PHASE VII, CLASSROOM ADDITION PEMBERTON TOWNSHIP REGAN YOUNG ENGLAND BUTERA, PC PROJECT #5349A SECTION 061050 - MISCELLANEOUS CARPENTRY PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification

More information

NEW equinox INSTALLATION GUIDE Issue

NEW equinox INSTALLATION GUIDE Issue NEW equinox INSTALLATION GUIDE Issue 1 CONTENTS If in doubt at any stage 1. Preparing the ring beam 2 2. Installing the framework 3 3. Insulation and waterproofing 7 4. Tile application: Steel tiles 9

More information

SECTION SHEET METAL FLASHING AND TRIM

SECTION SHEET METAL FLASHING AND TRIM SECTION 07620 SHEET METAL FLASHING AND TRIM PART 1 GENERAL 1.1 SUMMARY A. Section includes flashings and counterflashings, sheet metal roofing and fabricated sheet metal items, as indicated in Schedule.

More information

ICC-ES Evaluation Report Reissued September 1, 2012 This report is subject to renewal September 1, 2013.

ICC-ES Evaluation Report Reissued September 1, 2012 This report is subject to renewal September 1, 2013. ICC-ES Evaluation Report www.icc-es.org (800) 423-6587 (562) 699-0543 ESR-1790 Reissued September 1, 2012 This report is subject to renewal September 1, 2013. A Subsidiary of the International Code Council

More information

MECHANICAL BACK FASTENED SYSTEMS INSTALLATION DATA

MECHANICAL BACK FASTENED SYSTEMS INSTALLATION DATA MECHANICAL BACK FASTENED SYSTEMS INSTALLATION DATA 7/16 PETRARCH ARCHITECTURAL WALL PANELS APPLIED OVER A STUDWALL BY MEANS OF A FIELD ASSEMBLED BACK FASTENED SYSTEM DESIGN CONCEPT 7/16 panels may be installed

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS A CSW Industrials Company FR and FRE Roof Expansion Joint Covers IMPORTANT The following instructions are very important. Read them carefully, and be sure you understand them

More information

Instructions for Installation on a Flat Roof

Instructions for Installation on a Flat Roof Lightway, s.r.o. Registered office: Ledvinova 1714, 149 00 Praha 4 Offices: Za Humny 1054/4a, 161 00 Praha 6 tel.: 235 300 694, fax: 235 300 218 Company ID No.: 63669366, Tax ID No.: CZ63669366 Bank: KB

More information

Cembrit Patina. Cembrit Cover. Cembrit Solid. Cembrit Transparent

Cembrit Patina. Cembrit Cover. Cembrit Solid. Cembrit Transparent Rainscreen Cladding Your choice. In addition to the range of colours and shades, Cembrit cladding boards are available in four compositions, each with distinctive performance and characteristics. Cembrit

More information

This installation guide has been created to assist in constructing a Liniar conservatory roof from a kit format.

This installation guide has been created to assist in constructing a Liniar conservatory roof from a kit format. 1.00 - Introduction This installation guide has been created to assist in constructing a Liniar conservatory roof from a kit format. Please note, each roof has been individually designed to meet specific

More information

UltraCon Masonry Fasteners High Performance in a Wide Range of Applications

UltraCon Masonry Fasteners High Performance in a Wide Range of Applications UltraCon Masonry Fasteners High Performance in a Wide Range of Applications The UltraCon masonry fastening system from Elco Construction Products offers optimal performance in a wide range of masonry applications.

More information

European Technical Assessment. ETA-08/0285 of General Part. Technical Assessment Body issuing the ETA:

European Technical Assessment. ETA-08/0285 of General Part. Technical Assessment Body issuing the ETA: Member of SINTEF Building and Infrastructure P.O.Box 124 Blindern NO-0314 Oslo, Norway Phone +47 73 59 30 00 e-mail: certification@sintef.no www.eota.eu European Technical Assessment ETA-08/0285 of 2018-09-01

More information