Price list Connectors for floor reinforcement
|
|
|
- Maximilian Norman
- 5 years ago
- Views:
Transcription
1 Price list 2018 Connectors for floor reinforcement
2 Shear Connector With Crampons with a 50x50x4 mm base plate - screws Ø 8 mm Diameter x length CTLB X 020 0,17 2,31 CTLB X 030 0,17 2,31 CTLB X 040 0,18 2,41 CTLB X 060 0,20 2,47 CTLB X 070 0,21 2,52 CTLB X 080 0,22 2,57 CTLB X 105 0,24 2,94 CTLB X 125 0,26 3,20 CTLB X 150 0,28 3,47 CTLB X 175 0,30 3,62 CTLB X 200 0,38 3,83 Zinc plated steel shear stud connector, 12 mm shank diameter with head, riveted to 50 x 50 x 4 mm base plate with crampons, fastened into the timber structure by themeans of 2 DIN 571 screws, 8 mm diameter, 13 mm hexagonal head with a "truncated-cone" shaped under head. BASE Connector supplied with 2 DIN 571 screws Ø 8x100 mm (or Ø 8 X70 mm) Connector with Ø 8 X 120 mm screws: 0.26 Euro extra price for connector Drilling Machine + Support Accessories 1/2" Heavy Duty Electric Impact Wrench Code art. ACT-TRAPCOL ACT-FL65 ACT-BE-13-E ACT ACT-TTCEN ACT-TTNB100 ACT-TTOB65 Ø 65 mm self feed wood bit Adhesive tape Reinforcement tape for hole URIA 6x6 - P150 Heavy Duty Electric Impact Wrench Drilling Machine + Support Ø 65 mm self feed wood Oil Spray ml. 400 Water-proof and transpirant membrane (m\2) Special double-sided adhesive tape - rolls 50mm x 100mt Reinforcement tape for hole surround Ø 135/65 mm CENTURIA 6x6 - P150 NET 750,00 52,00 6,30 1,83 22,00 0,40 Oil Spray "Centuria" waterproof transpirant membane with ready applied double sided bonding tape. Tel (0) r.a. - fax + 39 (0)
3 Shear Connector With Crampons with a 75x50x4 mm base plate - screws Ø 10 mm MAXI Diameter x length CTLM X ,84 CTLM X ,84 CTLM X ,89 CTLM X ,94 CTLM X ,05 CTLM X ,10 CTLM X ,47 CTLM X ,68 CTLM X ,99 CTLM X ,10 CTLM X ,31 Euro Zinc plated steel shear stud connector, 12 mm shank diameter with head, riveted to a 75 x 50 x 4 mm base plate with crampons, fastened into the timber structure by the means of 2 DIN 571 screws, 10 mm diameter, 13 mm hexagonal head with a "truncated- cone" shaped under head. Connector supplied with 2 DIN 571 screws Ø 10 x 120 mm (or Ø 10 X 100 mm) Connector with Ø 10 X 140 mm screws: 0,39 Euro extra price for connector Double T drilling-machine Accessories 1/2" Heavy Duty Electric Impact Wrench Oil Spray Article code ACT-DOPPTRAP ACT-BE-13-E ACT ACT-TTCEN ACT-TTNB100 Adhesive tape URIA 6x6 - P150 1/2" Heavy Duty Electric Impact Wrench Double drilling-machine Oil Spray ml. 400 Water-proof and transpirant membrane Centuria mq Special double-sided adhesive tape - rolls 50mm x 100mt CENTURIA 6x6 - P150 "Centuria" waterproof transpirant membane with ready applied double sided bonding tape. NET 1310,00 6,30 1,83 22,00 Tel (04) r.a. - fax +39 (0)
4 OMEGA connector Consisting of a screw and stabilising plate H35x30x90 mm - screws Ø10 mm OMEGA Diameter x length Euro CVT 40V-10/ X ,47 CVT 40V-10/ X ,58 CVT 40V-10/ X ,73 Connector composed of a 10 mm screw, length 100/120/140 mm with tapered neck and a plate H38x30xL90 mm, thickness 4 mm, bent in Omega shape, having a hole for the coach screw to pass through. Connector supplied with 1 DIN 571 screw Ø 10 x 100 mm (or Ø 10 X mm) and 1 stabilising plate Accessories 1/2" Heavy Duty Electric Impact Wrench Article code Oil Spray ACT-BE-13-E ACT ACT-TTCEN URIA 6x6 - P150 1/2" Heavy Duty Electric Impact Wrench Oil Spray ml. 400 Water-proof and transpirant membrane Centuria mq CENTURIA 6x6 - P150 "Centuria" waterproof transpirant membane with ready applied double sided bonding tape. NET 6,30 1, Tel (0) r.a. - fax +39 (0)
5 Shear Stud Connector TECNARIA for steel-concrete composite structures Fastening with powder-actuated tool into steel S S S 355 CTF-S 1 stud + 2 nails + 2 cartridges Diameter x length per 100 pieces CTF 020 CC 12 X ,00 2,73 CTF 025 CC 12 X ,00 2,73 CTF 030 CC 12 X ,00 2,73 CTF 040 CC 12 X ,00 2,73 CTF 060 CC 12 X ,00 2,78 CTF 070 CC 12 X ,00 2,89 CTF 080 CC 12 X ,00 2,94 CTF 090 CC 12 X ,00 3,05 CTF 105 CC 12 X ,00 3,15 CTF 125 CC 12 X ,00 3,41 CTF 135 CC 12 X ,00 3,62 Zinc plated steel shear stud connector, 12 mm shank diameter with head, cold-swaged to a 35x50x4 mm base plate, fastened into the steel structure by the means of 2 resistance nails. Description. PRE-ASS Description * 0,26 PREASSEMBLED NAILING UNIT only to be used in special cases. CTF 020 e CTF 025 only preassembled Accessories Powder-actuated tool SPIT 560 with special drive pin for CTF connectors SBR Nails XX Cartridge disc Powder actuated tool SPIT 560 (kit for CTF) Replacement piston (cod PLT) SBR14 Nail Cartridges () NET Price in 1575,00 63,00 0,21 0,14 LOOSE NAILS Price list - validity: Replaces the previous ones Tel. +39 (0) r.a. - fax +39 (0)
6 Shear Stud Connector TECNARIA for steel-concrete composite structures Welded connectors CTF Diameter x lenght per 100 pieces CTF X ,00 2,00 CTF X ,00 2,00 CTF X ,00 2,00 CTF X ,00 2,00 CTF X ,00 2,05 CTF X ,00 2,15 CTF X ,00 2,21 CTF X ,00 2,31 CTF X ,00 2,42 CTF X ,00 2,68 CTF X ,00 2,78 Zinc plated steel shear stud connector, 12 mm shank diameter with head, cold-swaged to a 35x50x4 mm base plate Price list - validity: Replaces the previous ones Viale Pecori Giraldi, Bassano del Grappa (VI) - ITALY Tel. 39 (0) r.a. - fax + 39 (0)
7 High Resistance Shear Connector For steel-concrete composite structures Fastening with power-actuated tool into steel S S275 - S355 DIAPASON 1 stud + 4 nails + 4 cartridges Base x Height per 100 pieces CTF D 100 CC 55 X ,00 5,20 CTF D 125 CC 55 X ,00 5,55 Connecting device made of a 3 mm thick galvanized steel plate, pressed into a U shape. Ribbed base plate size 70x55 mm, two tilted wings 55x100 mm (or 55x125 mm) with holes for reinforcing bars.fastened to the steel structure by 4 high-resistance nails. Powder-actuated tool SPIT 560 with special drive pin for Diapason connectors Accessories Cartridge disc Article code XX SBR Nails Power actuated tool SPIT P560 (kit for Diapason) Replacement piston SBR Nail Cartridge () NET Price in 1320,00 50,00 0,21 0,14 Price list - Validity: Replaces the previous ones. Tel. +39 (0) r.a. - fax +39 (0)
8 Stud connector with screw and toothed plate for integrating concrete casting CTCEM Diameter x lenght CTCEM 14/ X 95 0,20 2,90 Stud connector with screw and toothed plate for concrete casting integration. Element composed of a Ø 14 mm shank of 10.9 hardened steel, with washer and 15 mm hexagonal head. The Ø 12 mm threaded body has a truncated conical section at the lower end allowing it to be inserted into the central hole of the 60x50x4 mm stabilizing plate folded on two sides. Connector supplied with toothed plate and screw with threaded body, lenght 65 mm /2" Heavy Duty Electric Impact PC ACT-BE15-Q Heavy Duty Electric Impact Wrench Drill bit for concrete Ø 11 mm 15 mm hexagonal drive, with 1/2 square fitting NET 6, Viale Pecori Giraldi, Bassano del Grappa (VI) - ITALY Tel. + (0) r.a. - fax +39 (0)
9 Stud connector with screw for integrating concrete casting VCEM Diameter x lenght VCEM 14/ X 95 0,10 1,65 Galvanised screw stud connector for concrete casting integration comprising a Ø14 mm shank of 10.9 tempered steel, with 15 mm washer and hexagonal head, and a 60 mm long, Ø 12 mm threaded body, for a total lenght of 110 mm Connector supplied with screw and threaded body, lenght 65 mm PC ACT-BE15-Q 1/2" Heavy Duty Electric Impact Heavy Duty Electric Impact Wrench Drill bit for concrete Ø 11 mm 15 mm hexagonal drive, with 1/2 square fitting NET 6,30 75 Tel. +39 (0) r.a. - fax +39 (0)
10 Stud connector with free-spinning washer for integrating concrete casting with thin additional slabs or cement mortar MINI CEM Diameter x lenght MINI CEM 10/ X 20 0,06 1,40 MINI CEM 10/ X 30 0,07 1,50 Stud connector with galvanised screw for concrete casting integration. Element comprising a shank in hardened steel with Ø 10mm, 60 mm threaded body; a Ø 10 mm, 20 or 30 mm stud with pre-assembled 3 mm thick free-spinning steel washer 30 mm in diameter; and a 6 mm hexagonal head H 3 H 4 PC DT7167 1/2" Heavy Duty Electric Impact Heavy Duty Electric Impact Wrench Drill bit for concrete Ø 8 mm 15 mm hexagonal drive 30 NET Tel. +39 (0) r.a. - fax +39 (0)
11 Two-Component Epoxy Resin for use with steel reinforcement bars. RTEC400 RTEC400 PC PC RTEGUN400 RTMIXER DESCRIPTION 400 ml two-component epoxy resin in a cartridge Drill bits Ø14 L=450 mm Drill bits Ø18 L=450 mm Hand gun for dispensing resin 400 ml cartridges Extension piece for mixer 380mm 21,00 17,50 26,50 36,00 0,25 DESCRIPTION Two-component Epoxy resin suitable for injection for fixing steel reinforcement bars into concrete, masonry, stone or timber. Supply and fixing of RTEC400 Tecnaria tixotropica two-component epoxy resin to undertake the adhesion between a reinforced concrete slab of a composite floor structure (wood, concrete, steel - concrete - reinforced concrete) and perimeter supporting walls using of steel reinforcement bars. Before the product can be used, suitable holes must be drilled and cleaned. RTEC 400 Bar mm Ø Hole diameter and depth mm Linear meters walls distance between bars 60 cm distance between bars 80 cm 12 14x200 mm cartridges 7 cartridges 12 14x300 mm cartridges 10 cartridges 12 14x400 mm cartridges 13 cartridges 16 18x200 mm cartridges 11 cartridges 16 18x300 mm cartridges 16 cartridges 16 18x400 mm cartridges 21 cartridges Price list - validity: Replaces the previous ones Viale Pecori Giraldi, Bassano del Grappa (VI) - ITALY Tel (0) r.a. - fax +39 (0)
COMPOSITE WOOD-CONCRETE FLOORS
COMPOSITE WOOD-CONCRETE FLOORS CTL BASE dowel and crampon connectors 3/12-20 21/03/2012 CTL MAXI dowel and crampon connector FLOOR STRENGTHENING TECNARIA MODERN STRENGTHENING SYSTEMS THE SOLUTION TO A
Ripple Construction Products Pvt Ltd
26 July 2017 1 Masonry: There is a tremendous variety of masonry bricks on the market. The different types of bricks (e.g. clay, sand-lime, or concrete bricks) are composed of different materials and are
Sheet Steel Facts. Most common head design for self-drilling, self-tapping screws.
Sheet Steel Facts Fastener Guide for Sheet Steel Building Products August, 2003 Fastener Materials Fasteners are manufactured from several materials and coatings. For the purpose of this fact sheet, the
DIRECT FASTENING SYSTEMS. Hilti. Outperform. Outlast.
DIRECT FASTENING SYSTEMS. Hilti. Outperform. Outlast. Powder-Actuated Tools and Fasteners DX - Light Tools DX 460-F8 Page 140 DX 460 MX Page 141 Consumables X-U, X-C, X-FS, X-HS U, X-M, X-EM Page 142 Insulation
SECTION MASONRY ANCHORAGE AND REINFORCEMENT. Display hidden notes to specifier. (Don't know how? Click Here)
PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 04080 MASONRY ANCHORAGE AND REINFORCEMENT Display hidden notes to specifier. (Don't know how? Click Here) A. Post installed masonry anchors. B. Miscellaneous
Fastener Type Chart. Fastener Categories. Sheet Metal Screws Fully threaded screws with a point for use in sheet metal. Abbreviated SMS.
Fastener Categories Wood Screws Machine Screws Thread Cutting Machine Screws Screws with a smooth shank and tapered point for use in wood. Abbreviated WS. Screws with threads for use with a nut or tapped
Drive Pins. Powder Actuated Systems. Powder Actuated Systems
Standard Drive Pins for Concrete, Masonry and Steel Drive Pins designed for fastening to standard strength concrete, masonry and steel up to a maximum of 8mm. Part No Drive Pin Length (thickness to steel)
FASTENERS ANCHORS - ADHESIVE. AC100E Professional Kits. Fasteners - Adhesive Anchoring-Concrete & Masonry
ANCHORS - ADHESIVE AC100E Professional Kits Adhesive value pack for the professional has all the required accessories for post installed chemical anchors, this easy to handle all-in-one kit keeps all your
Powder Actuated Fasteners - Drive Pins
122 Drive Pins Standard Pins Drive pins with a.300 diameter head are designed for permanently fastening a fixture to concrete, some types of masonry and A36 structural steel. Drive pins are manufactured
TABLE OF CONTENTS. Impregnated... 1 NORDIC FENCE Fynbo FSC Certified... 1
TABLE OF CONTENTS Impregnated... NORDIC FENCE Fynbo FSC Certified... Iron... NORDIC FENCE Lightweight model, GENERAL... NORDIC FENCE Lightweight model, with a grid filled... NORDIC FENCE Lightweight model,
FASTENERS ANCHORS - ADHESIVE. AC100E Professional Kits. Fasteners - Adhesive Anchoring-Concrete & Masonry
ANCHORS - ADHESIVE AC100E Professional Kits Adhesive value pack for the professional has all the required accessories for post installed chemical anchors, this easy to handle all-in-one kit keeps all your
Please direct powder-actuated and screw fastening technical inquiries to your local Hilti Field Engineer or Technical Support at
Section 3.1.2.8 Screws should only be used in non-corrosive applications, regardless of their coating, unless they are specifically listed as being suitable for outdoor or exposed conditions. More detailed
FASTENERS. Fasteners. Steel fasteners. Hexagon socket screws. Steel fasteners MC6S
Steel fasteners 21 FASTENERS Steel fasteners Hexagon socket s MC6S Hexagon socket head cap Din 912. (ISO 4762). * Fully threaded. 100 101 102 12.9 Uncoated 8.8 Uncoated 8.8 BZP Blanc Zink plated Dim mm
PURE 150-PRO EPOXY ADHESIVE ANCHOR
ONLINE ANCHOR DESIGN SOFTWARE PURE 150-PRO EPOXY ADHESIVE ANCHOR Fully featured and easy to use interface Easy 5 step anchor design with 3D modelling of fastening Professional specification of DEWALT fastenings
Butt Two pieces of wood meeting with flat sides adjoining usually at right angles. Some type of connector is needed to prevent movement.
Wood Connections There are basically five different types of connectors: Interlocking (carpentry joints), Dowel, Metal Connectors, Special Formed Connectors and Adhesives. I Interlocking (Carpentry Joints)
Fasteners. Metal Fasteners, Joining, and Adhesives. Bolts. Metal Fasteners, Joining, and Adhesives
Metal Fasteners, Joining, and Adhesives Fasteners Metal assemblies are often held together with fasteners, hardware devices that mechanically join or affix two or more objects together. Assembling with
COMPONENTS AND ACCESSORIES FOR FITTING TIPPERS
Hinges for aluminium side boards M 15020 Raw light perforated support M 15010 Zinc-plated light double opening hinge X 40070 Zinc-plated head cap screw 8x20 M 15030 Light raw locking plate M 15620 Zinc-plated
SPOTLIGHT STEEL CONSTRUCTION
SPOTLIGHT STEEL CONSTRUCTION 2 SPOTLIGHT STEEL CONSTRUCTION Preparation 4 6 Site inspection & conception Incoming goods Measuring and marking Production 7 14 Material cutting and sawing Drilling, milling,
BC-SERIES Screw-Jack Pedestal for Creative Design. Specifications text. Menu. Page 1/7
Specifications text BC Series Screwjack Pedestal 3rd Generation Menu Introduction of the BC series 1 Pedestal 1.1 Head 1.2 Base 2 Sleeve 3 Tabs 4 Lock 5 Slope corrector PH5 6 Slope corrector BC-PH5 7 Reverse
10x12 FOUNDATION GUIDE 10x12 TRICO AND FLORA SHEDS
10x12 FOUNDATION GUIDE 10x12 TRICO AND FLORA SHEDS 10x12 WOOD SKID FLOOR FLOOR SYSTEM FOR 10x12 TRICO AND FLORA SHEDS RAW MATERIALS LIST: 2 (9) FLOOR FRAMING AND SHEATHING: 1) BAND BOARD 2 x 6 x 12 PRESSURE
SECTION CONCRETE ANCHORING. Display hidden notes to specifier. (Don't know how? Click Here)
PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 03 15 00 CONCRETE ANCHORING Display hidden notes to specifier. (Don't know how? Click Here) A. General purpose mechanical anchors for horizontal and vertical
PETROCHEM MINING R&D 100 Award winner R&D Magazine Expert s Choice Winner Most Innovative Product
13.08.UK ROAD RAIL ROAD RAIL AGRO UTILITIES PETROCHEM MINING AGRO POWER PETROCHEM MINING BRIT INSURANCE ã ç ë í innovative é ê ç ÇìÅíë DESIGN ã ç ë í innovative é ê ç ÇìÅíë 2014 Fast Track 100 16th fastest
Complete line of Holemaking Products and Accessories
Complete line of Holemaking Products and Accessories I N T R O D U C I N G Holemaking Products Klein Tools has expanded our line of Holemaking products. We have added new flexible drill bits and related
Holemaking Products & Accessories
Holemaking Products & Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy
Dimensions Mechanical and Performance Requirements. Drop-In Anchors Hollow Wall, Steel Regular Style Drive Style...
Dimensions Mechanical and Performance Requirements Drop-In Anchors... 257 Hollow Wall, Regular Style... 258 Drive Style... 259 Hollow Wall, Plastic Ribbed... 260 Conical, Light Duty... 261 Fluted, Light
Leveling Feet, Base Plates and Casters
Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.
Comparable ISO Standard. Date of current standard/modified
Title Standard All-metal prevailing torque All-metal prevailing torque EN ISO EN ISO Comparable ISO Standard Date of current standard/modified 980 7042 27042 7042 1998-02 980 10513 30513 10513 1998-02
Heavy duty profiles. Heavy loads with maximum stability. Profile general overview... p Heavy duty profiles... S Load data... p.
Heavy loads with maximum stability Profile general overview... p. 366 Heavy duty profiles... S. 368 Load data... p. 372 Connection techniques... p. 374 Accessories... p. 384 Heavy duty profiles 365 Heavy
Features of TOOLFAST Clamping Devices and Clamping Elements
PART I CLAMPING DEVICES & CLAMPING ELEMENTS INTRODUCTION In the following pages of this part of catalogue, different types & sizes of clamping devices and clamping elements manufactured by us are illustrated.
Sigma Fasteners, Inc. Section 7
DESCRIPTION PAGE s Wedge s 7-1 Drop-In s 7-2 Single Expansion s 7-2 Machine Screw s 7-2 Lag Shields 7-3 Lead Wood Screw s 7-3 Hammer Drive s 7-4 Hollow Wall Fasteners 7-5 Toggle Bolts 7-6 Toggle Wings
CIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD METAL SCREWS. 6 x 3/4 P/N x 1 METAL SCREW P/N x 3/4 METAL SCREW
A21-1 1160 CIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD S For light duty applications in solid materials Color coded diameters for easy identifi cation Acid resistant NYLON FLANGED:
+ + CFA Guidance Note: Powder Actuated Fixing Systems. Ensuring best fixings practice. Contents. 1.
Ensuring best fixings practice www.the-cfa.co.uk CFA Guidance Note: Powder Actuated Fixing Systems Note: The guidance given in this Guidance Note is provided in good faith but the CFA cannot accept any
317 Hammers. General Tools CLAW HAMMER - STEEL CLAW HAMMER - STEEL CLAW HAMMER - FIBREGLASS CLAW HAMMER - STEEL CLAW HAMMER - FIBREGLASS
Rubber for secure grip One piece construction MTS3475 Professional for wood working Superbly balanced with head and shaft forged in one piece from selected tool steel with a full mirror polish surface
Holemaking Products & Accessories
Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy and consistency to get
FASTENERS C O M P AT I B L E W I T H F E R O T I E S Y S T E M S. Which FERO Tie Systems Require Fasteners?
FASTENERS C O M P AT I B L E W I T H F E R O T I E S Y S T E M S Which FERO Tie Systems Require Fasteners? Structural Actions: Fastener,, or Both? With the exception of FERO tie systems that are directly
PORTABLE UNITS BASKETBALL SCHELDE SUPER SAM MULTI-ADJUST
PORTABLE UNITS SCHELDE SUPER SAM MULTI-ADJUST Highest class unit with regulated projection (within range of 245-325 cm) equipped with SAM (Spring Assisted Mechanism) - unique solution which avails to set
Tools Sec. 23 2FW. 2018
Tools Sec. 23. 2018 Kits Ratchet Type Standard Nutsert Tool Part # Included In Kit Sizes Tool Type Qty. 12938 Nosepiece and Mandrel included 10-24, 10-32, 1/4"-20, 5/16"-18, 3/8"-16 Thread Size Nosepieces
>> ACCESSORIES 5 2 METALPLAST-SOPRANA
CABIN 7 >> ACCESSORIES METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490 FAX 011-9086979 E-MAIL : metsopr@tin.it WWW.metalplast-soprana.com 2 GRAB HANDLES GRAB HANDLE CODE 127013
AUXILIARY FRAMING AND ACCESSORIES
CUSTOM CABINETS & RACKS STRUT AND ACCESSO- RIES JUNCTION KITS ANGLE AND BRACE KITS SPLICE KITS BRACE KITS INSTALLATION KITS WALL ANGLE KITS RUBBER END CAPS SUPPORT INSTALLATION AND SUPPORT KITS STANCHION
5. Outdoor equipment. Barrier posts. Stainless steel
5. Outdoor equipment Urban Equipment Building Equipment 5.1 Bicycle stands / lean-on hoops 252-262 5.2 Laundry drying stands 263 5.4 Litter bins 264-265 5.5 Planters 266 Aufpreis: 40,00 Euro 251 Bicycle
Accessories and workbenches
Workbenches To complete the Elabo furnishing systems, we also provide workbenches and organisable steel plate base cabinets. Steel cabinets, shelves and shelf trolleys are available for storage of materials
ALUMINIUM SOLAR MOUNTING SYSTEM. Components catalogue FOR ALL TYPES OF ROOFS AND SITES
Components catalogue MOUNTING RAILS CARRIERS FOR RAILS FASTENERS BOLTS AND NUTS CLIPS FLAT ROOFS STRUCTURES FREE FIELD SYSTEMS COMPLEX ROOFS SYSTEMS ALUMINIUM SOLAR MOUNTING SYSTEM FOR ALL TYPES OF ROOFS
1.1. THREADED SLEEVES for different fixing purposes
.. THREADED SLEEVES for different fixing purposes ANCHORING TECHNOLOGY GENERAL INFORMATION INDEX General information...................................... Installation-kits D&W 5 mm...............................
2CH610-BOB 2CH67-BOB 2CH65-BOB ø 60 cm
CICERONE ST.132-1ENG SPECIFICATION Range: Cicerone Design: Lorenzo Stano SMALL TABLES WITH POWDER COATED FRAME AND HPL TOP Ø 60 cm Code: 2CH610-BOB height 103,5 cm, base Ø 50 cm, top Ø 60 cm 2CH67-BOB
Outdoor equipment. Barrier posts. Stainless steel. Barrier elements. Barrier poles. Outdoor equipment - pages
- pages 215-228 Bicycle stands / lean-on hoops Laundry drying stands Tree guards Litter bins Planters 215 Bicycle rack Sturdy and space-saving due to alternating high and low racks. Racks can be bolted
On-roof system Alpha + Product catalogue
On-roof system Alpha + Product catalogue Contents ALPHA +... 3 1. ALPHA + BASE RAILS... 4 2. ALPHA + SPLICES... 5 3. ALPHA + TELESCOPING END PIECES... 6 4. ALPHA + INTER-MODULE CLAMPS AND MODULE END CLAMPS...
Drill Bits & Hole Saws
F o r P Drill Bits & Hole Saws r o f e s s i o n a l s. Klein drill bits provide accuracy and consistency for professionals. Made of top-of-the-line materials for longer-lasting performance, Klein drill
GLOSSARY OF TERMS SECTION 8
GLOSSARY OF TERMS SECTION 8 Anchor Bolt Angle Base Plate Bay Blocking CCB Centerline Chord Cladding Clip Closure Strip An A-307 steel bolt embedded in the concrete footing to anchor the base plate of the
Installation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602
596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for
Football Goals 7,32x2,44 m
Football Goals 7,32x2,44 m 120x100 mm Professional aluminum football goals 7,32x2,44 m Made of special oval aluminum profile 120x100 mm with double reinforcing ribs. The main frame of the goal powder coated
UNI DIN UNI DIN 7982.
Tapping screws with cylindrical head cross UNI 6954. DIN 7981. Material 15800***** GALVANIZED STEEL WHITE 16900***** GALVANIZED STEEL BLACK 15700***** STAINLESS STEEL A-AISI 304 157A4***** STAINLESS STEEL
>> ACCESSORIES 5 2 METALPLAST-SOPRANA
1 CABIN 7 >> ACCESSORIES METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490 FAX 011-9086979 E-MAIL : metsopr@tin.it WWW.metalplast-soprana.com 2 GRAB HANDLES GRAB HANDLE CODE
Tools Sec. 23 $SU. 201
Tools Sec. 23. 201 2 2" & 3" Disc Holder Quick Change 5 2" Disc Green Zirconia Surface Removal 7 2" Disc Surface Conditioning 6 3 3" Disc Green Zirconia Surface Removal 7 3" Disc Surface Conditioning 6
Tools Sec. 23 Jun. 2018
Tools Sec. 23 Jun. 2018 2 2" & 3" Disc Holder Quick Change 5 2" Disc Green Zirconia Surface Removal 7 2" Disc Surface Conditioning 6 3 3" Disc Green Zirconia Surface Removal 7 3" Disc Surface Conditioning
Door Hinges Drill-in Hinges
Drill-in hinge StarTec Frame part For timber lining frames For rebated doors Maintenance-free friction bearing To use in combination with receiver Max. door weight: 40 kg Knuckle: Ø15 mm Drilling bit Ø7.2
This is trial version
Guiding components, Locating units, Dowel pins, Screws, Springs, Dateand recycling inserts, Retaining rings, Lifting devices, Clamping-systems, Thermal insulating sheets, Locating rings 1.01 1.02 Ordering
Especially suitable for work in restricted working spaces.
Innovative ratchet pipe cutter with a worldwide patent and ratchet mechanism allows you to cut a pipe without having o completely rotate the tool. Especially suitable for work in restricted working spaces.
Company Profile: We have pleasure in introducing FASCO GULF Building. Fastener Grades :
Company Profile: We have pleasure in introducing FASCO GULF Building Materials based in Dubai,UAE. Since 1994 Fasco is a sales & service oriented and professionally managed company specialized in dealing
MONNALISA. The Caimi Brevetti library system: MONNALISA. Aesthetic values of MONNALISA system
1/13 The Caimi Brevetti library system: MONNALISA MONNALISA is a line designed by Caimi Brevetti specifically for the library furnishing sector. It all began with in-depth research and study in this sector
PRODUCT INFORMATION 0.145/0.130" 100 5,
PROUCT INFORMATION Fasteners.300" Head rive Pins rive pins with a.300" head are designed for permanently fastening a fixture to concrete, some types of concrete block, and A36 or A572 structural steel.
SLIDING GATES BRUNDLE
SLIDING GATES BRUNDLE 32 BRUNDLE TOOTHED GATE RACK & ACCESSORIES TO BE WELDED TO GATE. GALVANISED OR SELF COLOUR IN ROLLED STEEL FOR GATES UP TO 1800KG Rack 22 x 22 H Art L H T L T Self Colour Self Colour
Thread protection accessories are installed at the MODIX production factory and delivered with couplers.
Installation of MODIX Rebar Coupler Identification of the product The type of MODIX Rebar Coupler can be identified by the marking on the product. Size of the Coupler can be identified also according to
Bumper Sign INSTALLATION INSTRUCTIONS
Bumper Sign INSTALLATION INSTRUCTIONS BUMPERSIGN TOOL CHECKLIST SDS MAX Rotary Hammer Drill Marker/Pencil SDS MAX 1 Carbide Drill Bit Tape Measure Torque Wrench with ½ Drive Power Source Vacuum ½ Drive
Channel & Bolt Fixings
CI/SfB X 6 January 006 series/0. 4.0 Channel & Bolt Fixings Ties & Restraint s Masonry Support Systems Lintels Channel & Bolt Fixings Windpost s Reinforcement Flooring Systems 4.0 CHANNEL & BOLT FIXINGS
Dowel-type fasteners. Timber Connections. Academic resources. Introduction. Deferent types of dowel-type fasteners. Version 1
Academic resources Timber Connections Dowel-type fasteners Version 1 This unit covers the following topics: Deferent types of dowel-type fasteners Introduction There are four criteria designers should
6.1. PUSH-PULL-PROPS and accessories
6 6.1. PUSH-PULL-PROPS and accessories MOUNTING TECHNOLOGY 6 GENERAL INFORMATION PUSH-PULL-PROPS AND ACCESSORIES INDEX General information....................... 3 Push-pull-props Type R.....................
Bollards, Column Guards, Corner Guards, Wheel Stops, Speed Humps & Fixings. Lockinex. ea i, ea u i
Bollards, Column Guards, Corner Guards, Wheel Stops, Speed Humps & Fixings Lockinex ea i, ea u i INTRODUCTION Protecting Building Curtilage, Assets & Personnel the Lockinex range of Bollards & Guards are
Hex Bolts & Hex Screws DIN 931/ISO4014 & DIN 933/ISO4017
Hex Bolts & Hex Screws DIN 931/ISO4014 & DIN 933/ISO4017 Diameter: M27 to M52 up to 500 MM in Length Diameter: M16 to M42 up to 300 MM in Length up to 300 MM in Length up to 300 MM in Length up to 300
Fortress Railing Overview ACTUAL FREIGHT CHARGES APPLY TO ALL FORTRESS RAIL ORDERS
Fortress Railing Overview 4 3 1 Fe 26 Iron Railing Systems Fortress Use the steps below for the following pages to complete your rail Vertical Cable and Glass Options Available Fortress Iron Railing System
Khathij Industrial Fasteners
Dear Sir/Madam, Khathij Industrial Fasteners This is Saqubar Sadique representing 'KHATHIJ INDUSTRIAL FASTENERS' from Chennai, India. We 'Khathij industrial fasteners' like to introduce us as a Stockist
table of contents Sliding Door Accessories Page Latches & Snuggers Stay Rollers Brackets & Stops
table of contents Square Track & Accessories Pages 4-7 Square Track Options Page 4 Light Duty Track Page 4 Square Track Brackets Page 5 Square Track Accessories Page 5 Square Track Trolleys Page 6-7 Offset
Adjustable Feet Castors Accessories for Floor Elements
Adjustable Feet Castors Accessories for Floor Elements Products in this section Levelling Knuckle Feet Threaded spindles for infinite height adjustment Metal or plastic foot plate Knuckle Feet X Compatible
TENANT IMPROVEMENT 16 FEBRUARY WEST 27TH STREET, 4TH FLOOR 100% CD OWNER/BID ADD 1-03/08/2018
SECTION 055000 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
Flooring Nails 6-D Flooring Nails $3.40 / 1# 6-D Flooring Nails $14.50 / 5# 8-D Flooring Nails $3.40 / 1# 8-D Flooring Nails $14.
Nails Nails Drywall Screws Common Nails 4D Common Nails $3.85 / 1# 6D Common Nails $3.00 / 1# 6D Common Nails $74.25 / 50# 8D Common Nails $3.00 / 1# 8D Common Nails $74.25 / 50# 10D Common Nails $3.00
INSTALLATION INSTRUCTIONS - CEILING POWER TRAK, HANGER HOOKS AND RACKS I. CONTENTS CEILING POWER TRAK KIT
INSTALLATION INSTRUCTIONS - CEILING POWER TRAK, HANGER HOOKS AND RACKS I. CONTENTS CEILING POWER TRAK KIT QUANTITY DESCRIPTION 2 POWER TRAK, 5 FT LG 4 END CAPS, YELLOW 10 SCREWS, 1 5/8 LG 10 WASHERS, 5/8
DOOR STOPS & BUMPERS See page 321 for finish descriptions.
CR-DH25 US3, 26D 4" Zinc Diecast Drop Down Door Holder CR-SBDH5 US3, 10, 10B 5" Solid Brass Kick Down Door Holder. Base 7/8" x 1-3/4" (Ives #455) CR-GS118* US3, 4, 10, 10B, 15A Door Stop 2-1/8" high *w/hanger
PURE GP. Adhesives GENERAL INFORMATION SECTION CONTENTS. Epoxy Injection Adhesive Anchoring System
General Information GENERAL INFORMATION PURE GP Epoxy Injection Adhesive Anchoring System PRODUCT DESCRIPTION The Pure GP is a two-component adhesive anchoring system. The system includes injection adhesive
HOME STRENGTHENING GUIDE HOW TO ECONOMICALLY STRENGTHEN YOUR HOUSE AGAINST EARTHQUAKES AND HURRICANES
HOME STRENGTHENING GUIDE HOW TO ECONOMICALLY STRENGTHEN YOUR HOUSE AGAINST EARTHQUAKES AND HURRICANES Grenville W Phillips II BSc, BEng, MASc, MURP, CEng, FIStructE, FCIHT, MAPM, MCSCE, MBAPE Chartered
TO O L K IT. Public Bike Repair
TO O L K IT Public Bike Repair The Dero Tool Kit includes all the necessary tools to perform most routine maintenance and adjustments on most bikes. All the tools are securely fastened with stainless steel
Fixings & Fastenings. Bright Zinc Plated, Galvanised & Stainless Steel. Lockinex. ea i, ea u i
Fixings & Fastenings Bright Zinc Plated, Galvanised & Stainless Steel Lockinex ea i, ea u i INTRODUCTION The Lockinex Range of Fixings & Fastenings are manufactured in Bright Zinc Plate, Hot dipped galvanised
QLF215 INSTRUCTION MANUAL
QLF215 INSTRUCTION MANUAL We ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-800-359-5520. We re ready to help! 1 2 3 IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS
TI: Efficient self tapping fasteners into concrete without plugs
TI: Efficient self tapping fasteners into concrete without plugs Application specific fastener solutions for use either with solid or pre-cast concrete substrates are highly sought after. Indeed, some
Technical Data February, 2016
Technical Data February, 2016 Product Description 3M DP-600 is a non-sag, grey, rapid setting, two-component polyurethane. It is packaged as 1:1 ratio liquids in a duo-pak cartridge. With the squeeze of
thoroughly tried and tested! EWE Tapping Valves A single system for all types of pipes
thoroughly tried and tested! EWE Tapping Valves A single system for all types of pipes www.ewe-armaturen.de EWE Tapping Fittings high-quality products from Germany EWE tapping fittings are the product
PUSH-PULL-PROPS. and accessories ROBUSTA-GAUKEL GMBH MOUNTING TECHNOLOGY &CO.KG
PUSH-PULL-PROPS and accessories MOUNTING TECHNOLOGY ROBUSTA-GAUKEL GMBH &CO.KG MOUNTING TECHNOLOGY PUSH-PULL-PROPS AND ACCESSORIES INDEX General information...................... 3 Push-pull-prop Type
Downtown Rack. Custom logo option available
Custom logo option available Downtown Rack The Downtown Rack uses thick, square-tube construction that can t be cut with a pipe cutter. The extended width of the Downtown Rack makes for easy bike parking
METALPLAST-SOPRANA BRUINO TO VIA VOLVERA
1 4 HINGES >> METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490 FAX 011-9086979 E-MAIL : metsopr@tin.it WWW.metalplast-soprana.com VERSION WITH OVERTURNED PART HINGES WELDABLE
fischer Test Report Fixing Tests for Fastfloor and Hollowcore Units
fischer Test Report Fixing Tests for Fastfloor and Hollowcore Units CONTENTS. Test Parameters. January 999. July 999. March 00. Fixings Products Tested. Fischer Nylon SX Plug. Fischer FNS Nail.
SECTION METAL FABRICATIONS
SECTION 05100 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for metal fabrications, including minimum requirements for fabricator, and galvanizing. 1.02 REFERENCE STANDARDS A. ASTM
FRP GATES MM08 FRP GATES Rev. 3 COMPOSITE SOLUTION PAGE 1
FRP GATES MM08 08.02.2016 Rev. 3 FRP GATES COMPOSITE SOLUTION PAGE 1 SUMMARY 1. USES AND CHARACTERISTICS... 3 2. EMPLOYMENT FIELDS... 4 3. MATERIALS... 5 3.1 TABLE OF PROFILES AND STRUCTURAL ACCESSORIES...
ANCHORS SLEEVE ANCHORS BOLT DIAMETER
SLEEVE ANCHORS No hole spotting. No mis-alignments. Simply drill through the fixture into concrete, insert and tighten. Preassembled for fast, easy installation. No special tools necessary; meets federal
With time, the evolution of anchors have led to different designs More than one anchor type may be suitable for a particular purpose Thus there are
Supreme range of Soil & rock anchors Introduction Used to anchor into concrete, masonry, stone With time, the evolution of anchors have led to different designs More than one anchor type may be suitable
PULL TESTERS FOR FASTENER MEMBRANE FOAM TESTING
FOR FASTENER MEMBRANE FOAM TESTING Measuring force from Apple to Zipper COM-TEN provides both analog and digital pull testers, and has been doing more and more work with the building industry in USA and
FASTENERS & ACCESSORIES
Staples General purpose staples to suit most popular staple guns. Particularly useful for stapling external angles and PVC mouldings to timber frames. PlasterX staples are designed to fit PLASTERX Arrow
Air-supply elements. Air-supply elements MGE Flanged plate (p. 5-3) M12-1/4" (p. 5-4) Longitudinal end connector (p.
Air-supply elements MGE 13.0 5-1 Air-supply elements 1 2 3 4 5 6 7 8 Flanged plate (p. 5-3) Connection piece (p. 5-4) Connection screw fitting -1/4" (p. 5-4) Longitudinal end connector (p. 5-5) 9 11 12
Powder Actuated Fastening INTRODUCTION
Powder Actuated Fastening INTRODUCTION Powder actuated fastening systems provide a cost effective method of attaching fixtures for light duty, static load conditions. Powers' systems consist of specially
SPECIAL EXTRUSIONS AND ACCESSORIES
PROFILE SYSTEM SPECIAL EXTRUSIONS s no i s u r t xe l a i c eps Import Belgium & Luxembourg Profilex s.a. 4A, Z.I. In den Allern L-9911 Troisvierges Tel: 00352/99 89 06 Fax: 00352/26 95 73 73 www.profilex-systems.com
Tuf-Lite III Fans 5000K Series Hub
Tuf-Lite III Fans 5000K Series Hub INSTALLATION MANUAL Hudson Tuf-Lite III fan blades Adjustable Pitch Fan Assembly 20 thru 30 Diameter Hudson Tuf-Lite III fan blades are of single piece fiberglass reinforced
MATERIAL AND EQUIPMENT STANDARD FOR METRIC TYPE FASTENERS (SCREWS, BOLTS, STUDS, NUTS AND WASHERS) ORIGINAL EDITION DEC. 1997
MATERIAL AND EQUIPMENT STANDARD FOR METRIC TYPE FASTENERS (SCREWS, BOLTS, STUDS, NUTS AND WASHERS) ORIGINAL EDITION DEC. 1997 This Standard is the property of Iranian Ministry of Petroleum. All rights
Swerve Rack CUSTOM RACKS AVAILABLE
CUSTOM RACKS AVAILABLE Swerve Rack The design of the Swerve mirrors the bike frame, thus providing superior bike support while making it easy to secure both the bike frame and wheel with a standard u-lock.