METALPLAST-SOPRANA BRUINO TO VIA VOLVERA
|
|
- Kelly Gardner
- 5 years ago
- Views:
Transcription
1 1 4 HINGES >> METALPLAST-SOPRANA srl BRUINO TO VIA VOLVERA 88/4 TELEPHONE FAX metsopr@tin.it
2 VERSION WITH OVERTURNED PART HINGES WELDABLE HINGE WITH FLAT FLAP AND REINFORCEMENT NERVATIONS CODE SPECIFICATION - ANTIFRICTION NYLON WASHER - 4mm THICK METAL SHEET - ZINC PLATET PIN - PLATE GASKET CODE ON DEMAND 2 VERSION WITH OVERTURNED PART ADJUSTABLE AND WELDABLE HINGE WITH FLAT FLAP AND NERVATIONS CODE SPECIFICATION - ANTIFRICTION NYLON WASHER - 4mm THICK METAL SHEET - ZINC PLATET PIN DOUBLE FOLD WELDABLE HINGE WITH REINFORCEMENT NERVATIONS CODE SPECIFICATION - ANTIFRICTION NYLON WASHER - 4mm THICK METAL SHEET - ZINC PLATET PIN SINGLE FOLD WELDABLE HINGE WITH REINFORCEMENT NERVATION CODE SPECIFICATION - ANTIFRICTION NYLON WASHER - 4mm THICK METAL SHEET - ZINC PLATET PIN
3 3 HINGE ASSEMBLY CODE SPECIFICATION: HINGE: 4mm THICK ZINC PLATED METAL SHEET ANTIFRICTION WASHERS:NYLON PIN: ZINC PLATED STEEL PROVIDED WITH POLYAMIDE PROTECTION PIN CAPS INSTEAD OF RETAINING RINGS ON DEMAND VARNISHED METAL SHEET HINGE WITH INCORPORATE SCREWS CODE SPECIFICATION: HINGE: 4mm THICK BLACK POWDER COATED METAL SHEET ANTIFRICTION WASHERS: NYLON PIN: ZINC PLATED STEEL M8 SCREWS INCLUDED
4 5mm THICKNESS HINGE ARTICOLO HINGES 4 SPECIFICATION: - HINGE: ZINC PLATED STEEL 5mm THICKNESS - PIN: ZINC PLATED STEEL - ANTIFRICTION WASHERS: NYLON PROVIDED WITH POLYAMIDE PROTECTION PIN CAPS INSTEAD OF RETAINING RINGS ON DEMAND VERSIONS: - CODE : WITH REINFORCEMENT WELDINGS - CODE : WITHOUT REINFORCEMENT WELDINGS THICKNESS 5mm
5 5 VARNISHED METAL SHEET HINGE FOR TRACTOR CABIN DOORS CODE SPECIFICATION: HINGE: 4mm THICK BLACK POWDER VARNISHED METAL SHEET PIN Ǿ8: ZINC PLATED STEEL PROTECTION CAPS: POLYAMIDE 4mm THICK THERMOPLASTIC RUBBER GASKET CODE ON REQUEST
6 6 HINGE ASSEBLY CODE HINGE code mm thick zinc plated metal sheet - N 2 antifriction nylon washers - Ø6 pin material: SMnPb37 zinc plated - N 2 retaining rings DIN 6799 HINGE ASSEMBLY CODE HINGE code mm thick zinc plated Sheet metal - N 2 antifriction nylon washers - Ø8 pin material: SMnPb37 zinc plated - N 2 retaining rings DIN 6799
7 7 HINGE ASSEMBLY CODE HINGE code mm thick zinc plated metal sheet - N 2 antifriction nylon washers - Ø6 pin material: SMnPb37 zinc plated - N 2 retaining rings DIN 6799 HINGE ASSEMBLY CODE HINGE code mm thick zinc plated metal sheet - N 2 antifriction nylon washers - Ø8 pin material: SMnPb37 zinc plated - N 2 retaining rings DIN 6799
8 8 WELDABLE HINGE CODE HINGE code Weldable 4 mm thick metal sheet - N 2 antifriction nylon washers - Ø8 pin material: SMnPb37 zinc plated - N 2 polyamide protection pin caps STAINLESS STEEL HINGE CODE Cerniera cod Material: stainless steel AISI Pin: Ø 8 mat. Stainless steel AISI 303, ends riveted
9 9 HINGE ASSEMBLY CODE Hinge code zinc plated sheet metal (thickness: 2mm) - N 2 retaining rings DIN 6799 VARNISHED HINGE CODE Hinge code mm thick metal sheet - black powder varnished RAL N 2 antifriction nylon washers
10 HINGE 10 HINGE ASSEMBLY CODE Hinge cod mm thick metal sheet - grey powder varnished RAL N 2 antifriction nylon washers OUR OTHER HINGES PROVIDED ACCORDING TO CUSTOMER REQUESTS SPECIFICATION: - STANDARD WIDTH mm - 4mm THICK METAL SHEET - ANTIFRICTION NYLON WASHERS - PIN DIAMETER 8mm, MATERIAL ZINC PLATED STEEL ON REQUEST PROVIDED WITH: 1. DIFFERENTS FLAP LENGTH 2. HOLES OR SLOT 3. FOLDS ON FLAPS 4. VARNISHED, ZINC PLATED OR WELDABLE - N 2 RETAINING RINGS DIN 6799 FLAP A LENGTH A AXIS FLAP B LENGTH B
11 11 PLASTIC HINGE ASSEMBLY CODE Ø8 Hinge code material: polyamide GF UV PROTECTION CAPS - zinc plated pin Ø8mm - polyamide protection pin caps PLASTIC HINGE WITH REINFORCERED MAIN STRUCTURE CODE Hinge code material: polyamide GF UV - zinc plated pin Ø8mm - N 3 holes for countersunk head M8 screws Assembly code Hinge kit including : - Protective glass rubber - Protective glass spacer
12 12 PLASTIC HINGE ASSEMBLY CODE Hinge code material: polyamide GF UV - zinc plated pin Ø8mm, ends riveted - N 3 holes for countersunk head M8 screws Assembly hinge code material: polyamide GF UV - zinc plated pin Ø8mm, mounted with retaining rings DIN N 3 holes for countersunk head M8 screws Assembly hinge code : Hinge kit including: - Protective glass rubber - Protective glass spacer PLASTIC HINGE ASSEMBLY CODE Hinge assembly code interchangeable with codes and material: polyamide GF UV - zinc plated pin Ø8mm, ends riveted - N 3 holes for countersunk M8 screws - mechanical properties improved
13 13 PLASTIC HINGE ASSEMBLY Code Hinge assembly code material: polyamide GF UV - zinc plated pin Ø8mm, ends riveted - N 3 holes for countersunk M8 screws - shorter centre to centre distance version DEMONSTRATIVE SCHEME FOR CORRECT FITTING HINGE TO HAVE A PERFECT GRIP WITH GLASS SCREW M8X40 DIN 7991 HINGE WASHER ISO 7090 NUT UNI COVERNUT 5mm THICK GLASS PROTECTION GLASS RUBBER - CODE PROTECTION GLASS SPACER - CODE HUBCAPS - CODE
14 14 HINGE PLASTIC PART HINGE PLASTIC PART CODE CODE PROTECTION GLASS RUBBER CODE PROTECTION GLASS SPACER CODE PROTECTION GLASS SPACER FOR HEXAGON HEAD SCREWS CODE HINGE SPACER CODE PROTECTION GLASS RUBBER CODE CENTERING BUSH CODE MATERIAL: THRMOPLASTIC RUBBER MATERIAL: POLYAMIDE
METALPLAST-SOPRANA BRUINO TO VIA VOLVERA 88/4 TELEPHONE FAX
4 HINGES >> METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490 FAX 011-9086979 E-MAIL : metsopr@tin.it WWW.metalplast-soprana.com 2 VERSION WITH OVERTURNED PART ADJUSTABLE HINGE
More information>> ACCESSORIES 5 2 METALPLAST-SOPRANA
CABIN 7 >> ACCESSORIES METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490 FAX 011-9086979 E-MAIL : metsopr@tin.it WWW.metalplast-soprana.com 2 GRAB HANDLES GRAB HANDLE CODE 127013
More information>> ACCESSORIES 5 2 METALPLAST-SOPRANA
1 CABIN 7 >> ACCESSORIES METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490 FAX 011-9086979 E-MAIL : metsopr@tin.it WWW.metalplast-soprana.com 2 GRAB HANDLES GRAB HANDLE CODE
More informationTRACTOR AND EARTH MOVING MACHINES CABINS COMPONENTS
CATALOGUE 2018 TRACTOR AND EARTH MOVING MACHINES CABINS COMPONENTS DESIGN AND CONSTRUCTION ON DEMAND CHANGES AND ADAPTATION 2 METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490
More informationThis is trial version
Guiding components, Locating units, Dowel pins, Screws, Springs, Dateand recycling inserts, Retaining rings, Lifting devices, Clamping-systems, Thermal insulating sheets, Locating rings 1.01 1.02 Ordering
More informationSELF-TAPPING SCREW FIXINGS
Denomination: Reference: FT ROS-en Date: 15/12/15 Revision: 3 Page: 1 of 14 T81 AUE T82 TCP T83 TFI CHARACTERISTICS ISO 1478 self-tapping thread. Require pre-drilling. Point Type F. Wide variety of head
More informationM4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information
Handles & Light Duty PA 20 1 Assembly of Hinge M4x8 FHCS [24-208-4] M4 T-Nut 20 [20-044] M4 Hex Nut [24-706-4] 60 300-0 PA 20 on panel 2 Hinge positions 3-4 Clearance dimensions 5 Range of swing FOR M4
More informationDoor Hinges Drill-in Hinges
Drill-in hinge StarTec Frame part For timber lining frames For rebated doors Maintenance-free friction bearing To use in combination with receiver Max. door weight: 40 kg Knuckle: Ø15 mm Drilling bit Ø7.2
More informationSign Holder I Mirror Clamp Distance Holder I Shelf Support
Sign Holder I irror Clamp : Distance Holder I Shelf Support : 02 Content Glass holder with flat head, mirror clamp round or angular, distance holder till diameter 55 mm, shelf supports. irror clamp S50
More informationGota cassette. Version 1.10 Sun Protection AVZ 3G.1
Version 1.10 Sun Protection AVZ G.1 G.2 Sun Protection AVZ Version 1.10 Part number Description Paint finish Length in m 1 4211 772-090 Alu wall bracket 140 mm Mill finish 4211 772-008 Idem RAL 705 light
More informationAluminum frame packing list of Smart Laser CO2
Aluminum frame packing list of Smart Laser CO2 1 805mm V-slot 20mm*40mm 1 2 780mm V-slot 20mm*40mm 2 3 860mm Aluminum frame 20mm*40mm 3 4 177mm Aluminum frame 20mm*40mm 1 5 85mm Aluminum frame 20mm*40mm
More informationNEWS Part. N /0 MINITEC NEWS
NEWS 2009 Part. N 95.0423/0 MINITEC NEWS 2009 1 TABLE OF CONTENT INTRODUCTION CONTENTS 3 END CAP Z WITH HAMMER TAPS 3 END CAP 45X45 VA 4 ANGLE 25 GD-Z 4 ANGLE 45X90 GD-Z 5 ANGLE 90 GD-Z 5 HINGE 19 S 6
More informationFRP GATES MM08 FRP GATES Rev. 3 COMPOSITE SOLUTION PAGE 1
FRP GATES MM08 08.02.2016 Rev. 3 FRP GATES COMPOSITE SOLUTION PAGE 1 SUMMARY 1. USES AND CHARACTERISTICS... 3 2. EMPLOYMENT FIELDS... 4 3. MATERIALS... 5 3.1 TABLE OF PROFILES AND STRUCTURAL ACCESSORIES...
More informationCOMPONENTS AND ACCESSORIES FOR FITTING TIPPERS
Hinges for aluminium side boards M 15020 Raw light perforated support M 15010 Zinc-plated light double opening hinge X 40070 Zinc-plated head cap screw 8x20 M 15030 Light raw locking plate M 15620 Zinc-plated
More informationC13.11 HANDLES AND CONNECTION PIECES C13 SIDE HUNG WINDOWS
C13 SIDE HUNG WINDOWS C13.11 HANDLES AND CONNECTION PIECES 01.05.2014 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS
More informationA = 4-1/2 B = 1/4 C = 5/16. Pin Dia. Use with C-11, C-12, C-13, C-19 Use with C-10, C-12, C-13, C dia. A = 4-1/3 A = /16 1-5/8
B C-10 Dia. Pin C-11 Dia. Pin C-12 Dia. Pin Bi-fold Pins & Associated Parts A A = 4- B = C = A = 4-1/6 B = C = A = 4- B = C = C Pin Dia. C-11, C-12, C-13, C-19 C-10, C-12, C-13, C-16 C-13 Dia. Cap C-16
More informationUNI DIN UNI DIN 7982.
Tapping screws with cylindrical head cross UNI 6954. DIN 7981. Material 15800***** GALVANIZED STEEL WHITE 16900***** GALVANIZED STEEL BLACK 15700***** STAINLESS STEEL A-AISI 304 157A4***** STAINLESS STEEL
More informationSTATE WHEN ORDERING HI =...
STATE WHEN ORDERING HI =... mm Surface treatment of outer walls and night closing doors Stainless steel cladding Special anodized... RAL... Special powder coating...... Surface treatment of door leaves
More informationPARTS LIST MS 2892-D
PARTS LIST MS 89-D 8--00 8-0-000 KNIFE BRACE (TOP) 8--00 RIGHT KNIVE (UHMW) 8--00 LEFT KNIFE (UHMW) 8-0-00 KNIFE BRACE (UNDER) NC0-8-0 0 FLAT HEAD SOCKET CAP SCREW STAINLESS /8- X " LG NC0-9-00 0 LOCK
More informationsalto safe 4028 A12 Turn-tilt windows
A12 Turn-tilt windows salto safe 4028 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. 32 9 388 88 81 - F. 32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com salto safe 4028 Contents 1. General
More informationfrom page 586 from page 609
from page from page 0 from page from page 0 from page from page 0 from page 0 from page MSX. Design Standard components - MSX-B base: glass-fibre reinforced polyamide based (PA) technopolymer, black colour,
More informationFASTENERS. Fasteners. Steel fasteners. Hexagon socket screws. Steel fasteners MC6S
Steel fasteners 21 FASTENERS Steel fasteners Hexagon socket s MC6S Hexagon socket head cap Din 912. (ISO 4762). * Fully threaded. 100 101 102 12.9 Uncoated 8.8 Uncoated 8.8 BZP Blanc Zink plated Dim mm
More informationMEFA mounting accessories
MEFA mounting accessories Mounting accessories Base plates Page 5/2 Double holder Page 5/4 Height-adjustable suspensions Page 5/5 Pendular bolt joints Page 5/6 Trapeze hanger Page 5/7 Threaded hooks, distance
More informationFEET, WHEELS, FLOOR FASTENINGS, SUPPORTS
SYSTEM COMPONENTS FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS s t r oppu S, s gn i n e t s af r oo l F, s l eehw, t e ef FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS 136 MINITEC PROFILE SYSTEM BASE AND TRANSPORT
More informationK15.12 ROLLENBAND K15 DOORS
K15 DOORS 01.04.2015 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General characteristics....03 2. Application range....03
More informationASOLA - THETA ISTRUZIONI DI MONTAGGIO FITTING INSTRUCTIONS INSTRUCTIONS DE MONTAGE INSTRUCCIONES DE MONTAJE MONTAGEANLEITUNG. IMPBAT Rev.
ASOLA - THETA I F E D ISTRUZIONI DI MONTAGGIO FITTING INSTRUCTIONS INSTRUCTIONS DE MONTAGE INSTRUCCIONES DE MONTAJE MONTAGEANLEITUNG IMPBAT08-2 - Rev. 00 "THETA" FITTING INSTRUCTIONS SUB-FRAME Correct
More informationRH-412 STEEL DOORS INSTALLATION INSTRUCTIONS
RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side.
More informationK15.13 FACE FIXED DOOR HINGES K15 DOORS
K15 DOORS K15.13 01.02.2017 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General... K15.13.03 2. 2-part hinge...
More informationWalk-Behind Broadcast Spreader
January 1, 2019 Lit. No. 83679, Rev. 01 Walk-Behind Broadcast Spreader SP-8 & SP-8SS Parts List This document is for SnowEx SP-8 walk-behind broadcast spreaders beginning with serial numbers PD-288 and
More informationCalf-Tel Pen System Assembly Instructions
Calf-Tel Pen System Assembly Instructions (Instructions work for 4, 6, and the 7 Pen Systems) 1 ASSEMBLY OF PEN FRONT AND WALLS START THE ASSEMBLY BY LINING UP THE TWO UNI-DIRECTIONAL ARROWS IN THE TOP,
More informationPull Handles Fixing Types. One-sided installation. Installation per pair. Wood, plastic profiles, 2-3 chamber aluminium profiles
Pull Handles Fixing Types One-sided installation Wood, plastic profiles, 2-3 chamber aluminium profiles Installation per pair Wood, plastic profiles, 2-3 chamber aluminium profiles 204 HEWI Hardware Technology
More informationACCESSORIES. Wooden Dowels. Fasteners. Miscellaneous. Shelf Supports
ACCESSORIES ACCESSORIES Fasteners PMI has a variety of Fasteners and Connectors for any application. Euro-Bolts, Spiral Cam Connectors, Screws and Sleeves - we have your solution! Shelf Supports Assorted
More informationSignature. Date. Surname. 30 max.
ITEM QTY PART NUMBER DRG - DRG - DRG - DRG 9- TCR DESCRIPTION Trolley Low Headroom Frame TCR / TCR Link Plate Spacer Air Hoist Title of project Date Material Weight Designed by Approved by Surname Date
More informationHardware & Ironmongery Ramp and door fasteners Door stops Nuts, bolts & washers
Hardware & Ironmongery Ramp and door fasteners Door stops Nuts, bolts & washers Hinge Nuts Spring Bolt Washers Bolts - Hinge Contents Ramp and door accessories: Hinges, spring bolts, antiluce plates, gas
More informationCLIC TOP 17. Features
Single piece self-locking polyamide cable clamp for SEC 20 in- and outdoor use Installation with metric fire protection anchor or wood screw Halogen-free according to IEC 754-2, very high UV-resistance
More informationAdjustable Feet Castors Accessories for Floor Elements
Adjustable Feet Castors Accessories for Floor Elements Products in this section Levelling Knuckle Feet Threaded spindles for infinite height adjustment Metal or plastic foot plate Knuckle Feet X Compatible
More informationHardware & Ironmongery Ramp and door fasteners Door stops Nuts, bolts & washers
Hardware & Ironmongery Ramp and door fasteners Door stops Nuts, bolts & washers Hinge 0 Nuts - Spring Bolt 0 Washers Bolts - Hinge 0 Contents Self tapping & wood screws, Spirol and locking pins & rivets
More information4832A Installation Sheet Part List
4832A Installation Sheet Part List (1) 4016A-43-003 Qty 1- (2) 4016A-43-002 Qty 1- (3) 4016A-43-001 Qty 2- (4) 4016A-10-005 Qty 1- (5) 4016A-43-004L Qty 1- Mounting Bolt Kit (A) (K) Qty 2 - Qty 6 - M10
More informationFixing types for pull handles
Fixing types for pull handles One-sided installation Timber, Plastic profiles, 2-3 chamber aluminium profile Double-sided installation Timber, Plastic profiles, 2-3 chamber aluminium profile Please consult
More informationBasketball Unit completely welded for playground goals
Assembly instructions Art.-Nr.: 111 4616 111 4629 Basketball Unit completely welded for playground goals 0218214 2018 Sport-Thieme GmbH D-38367 Grasleben Germany sport-thieme.com info @sport-thieme.com
More informationFixings & Fastenings. Bright Zinc Plated, Galvanised & Stainless Steel. Lockinex. ea i, ea u i
Fixings & Fastenings Bright Zinc Plated, Galvanised & Stainless Steel Lockinex ea i, ea u i INTRODUCTION The Lockinex Range of Fixings & Fastenings are manufactured in Bright Zinc Plate, Hot dipped galvanised
More informationA leading supplier & manufacturer of precision engineered components
A leading supplier & manufacturer of precision engineered components T: +44 (0) 1536 461140 F: +44 (0) 1536 461662 E: sales@technifast.co.uk W: www.technifast.co.uk T: +44 (0) 1536 461140 F: +44 (0) 1536
More informationASSORTMENTS BRONZECLASSWB Above assortment with one #99901 Cabinet, 17 extra dividers, all drawers pre-labeld inside and out.
ASSORTMENTS 34 s BRONZECLASS Body Shop Fastener Starter 71 of the most popular items - Over 1700 pieces. Fasteners Only - No Bins Box Qty. 1 Inside of drawer BRONZECLASSWB Above assortment with one #99901
More informationTechnical Manual East Third Avenue Kennewick, Washington Toll Free: (800) Fax: (509) Web:
TiLite ZRA Technical Manual 1426 East Third Avenue Kennewick, Washington 99337 Toll Free: (800) 545-2266 Fax: (509) 586-2413 Web: www.tilite.com SPEC0077 REV A 7/1/03 SPEC0078 REV B DVB 6/29/04 APPROVED:
More informationSPECIFICATION SHEETS. FRAMELESS GLASS pool fencing
SPECIFICATION SHEETS FRAMELESS GLASS pool fencing 8-10mm 12mm STANDARDS & NATA TESTING 1254mm 1200mm * GLASS POOL FENCING MAXIMUM SPAN 2000MM 12MM TOUGHENED SAFETY GLASS 1200MM HIGH FULLY AS/NZ-2208 CERTIFIED
More informationConnector Technology, Shelf Supports Connection Fittings
MODULAR Connection fitting for recess mounting Finish: Burnished : For recess mounting The plate should allways be installed so that the supporting plate butts against the end of the recess. For rapid
More informationVARVIT USA, LLC SEQUOIA DRIVE SUITE 101 AURORA,ILLINOIS USA PRODUCT CATALOG
PRODUCT CATALOG With over 50 years of manufacturing experience, The Vescovini Group is one of the major players in the European market producing high quality fasteners, screws, nuts, studs, wheel bolts
More informationLinear Motion and Assembly Technologies Aluminum Framing /07. Die-Cast Foundation Brackets 3-10 & 3-11
-0 Linear Motion and ssembly Technologies luminum Framing 91 500 1 /07 Section : Profile onnectors Overview One of the greatest strengths of the osch Rexroth structural aluminum framing system is the wide
More informationINSTALLATION INSTRUCTIONS RH 412 STEEL DOORS
By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side. Note: Having the hood open makes the job
More informationSPECIAL EXTRUSIONS AND ACCESSORIES
PROFILE SYSTEM SPECIAL EXTRUSIONS s no i s u r t xe l a i c eps Import Belgium & Luxembourg Profilex s.a. 4A, Z.I. In den Allern L-9911 Troisvierges Tel: 00352/99 89 06 Fax: 00352/26 95 73 73 www.profilex-systems.com
More informationARIANNA NEW RANGE OF HANDLES. New design with strong shapes Complete range Long-lasting durability Sturdy and fluid
ARIANNA NEW RANGE OF HANDLES New design with strong shapes Complete range Long-lasting durability Sturdy and fluid 02 General features ARIANNA. General features 03 BEAUTY WITHIN REACH If today's market
More informationOrganisational Kitchen Fittings Kitchen Cabinet Accessories
Kitchen waste bin systems Single waste bin, capacity 1 litres Carcase width: Min. 400 mm For door mounting: For left and right hand use Installation: Screw fixing to side panel Housing: Steel, plastic
More informationFASTENERS 701L, 701L-ASS 701L-C. Over Centre Fasteners 701 Series. Over Centre Fasteners 701 Series
1 2 Over Centre Fasteners 701 Series 701L, 701L-ASS 701L - Cold Rolled 701L-ASS - 316 Stainless 701L - Zinc Plated 701L-ASS - RAW 41g Padlockable Suits Strikers 30Z & 30-ASS Ø 4.3mm Over Centre Fasteners
More informationred rooster REV. TCR500 / TCR 1000 Link Plate 2TE Air Trolley (2TE/AT/4) DESCRIPTION Air Hoist PART NUMBER DRG TCR 1000 DRG
ITEM QTY PART NUMBER DRG 5- TCR DRG 5- DESCRIPTION TE Air Trolley (TE/AT/) Air TCR5 / TCR Link Plate TE and Trolley 6/6/ - 6kg Title of project Material Weight REV. Designed by Checked by Approved by B.
More informationSPECIAL HINGES. From flap hinges and mini-hinges to glass door hinges for direct mounting on the cabinet side wall.
SPECIAL HINGES From flap hinges and mini-hinges to glass door hinges for direct mounting on the cabinet side wall. 0 GRASS THE CATALOGUE 0-0 SPECIAL HINGES Hinges for special applications. Where individual
More informationCustom Wood Frame Overlay for Glass Doors Installation Instructions
MARVEL CUSTOM WOOD FRAME OVERLAY FOR GLASS DOORS Custom Wood Frame Overlay for Glass Doors Installation Instructions Wine Cellars 6SWC 6SWCE 61WC 61WCM 66SWC (2 required) 66SWCE (2 required) Beverage Centers
More informationClamp Pair. Bore Diameter (mm) Clamp Material PP = Polypropylene PA = Polyamide PE = Polyethylene AL = Aluminum
DIN 0 CLAMPS Clamp Pairs HRL = Standard Duty (Ribbed Profile) HRGL = Standard Duty (Smooth Profile) HRS = Heavy Duty (Ribbed Profile) HRGS = Heavy Duty (Smooth Profile) Clamp Pair ore Diameter (mm) Clamp
More informationHardware Fitting Accessories Bolts
Lever action flush bolt With slide Width: 19 mm Stroke (a): 25 mm 1 Flush bolt 1 Set of fastening material With lever arm Width: 19 mm Stroke (a): 18 mm 1 Flush bolt 1 Set of fastening material Stainless
More informationTECHNICAL SPECIFICATION FOR STEEL DRY CARGO CONTAINER 6'x1960mmx1920mm TYPE
TECHNICAL SPECIFICATION FOR STEEL DRY CARGO CONTAINER 6'x1960mmx1920mm TYPE 1. General 1.1 Scope This specification will cover the design, construction, materials, testing and inspection performances of
More informationINSTALLATION INSTRUCTIONS SIDE BAR FORD ESCAPE & MAZDA TRIBUTE PART #
INSTALLATION INSTRUCTIONS SIDE BAR 2008-2010 FORD ESCAPE & MAZDA TRIBUTE PART # 50136 50137 PARTS LIST: 1 Driver/Left Sidebar 2 10-1.50mm x 35mm Bolt Plate 1 Passenger/Right Sidebar 2 10-1.50mm x 30mm
More informationAUXILIARY FRAMING AND ACCESSORIES
CUSTOM CABINETS & RACKS STRUT AND ACCESSO- RIES JUNCTION KITS ANGLE AND BRACE KITS SPLICE KITS BRACE KITS INSTALLATION KITS WALL ANGLE KITS RUBBER END CAPS SUPPORT INSTALLATION AND SUPPORT KITS STANCHION
More informationTROLLA LEAVY 97 CM Lawn sweeper
TROLLA LEAVY 97 CM Lawn sweeper Artikel nr.: 1008 EN Operating manual 014/1 Dear Customer, Congratulations on your new Trolla product. We hope you will enjoy it. Checkout with your new Trolla product may
More informationMaterial Packing Brown Grey Pine Black White
RTA Connectors Minifix Zinc alloy For housing: 12 or 18 Bolt hole: Ø 7 or 8, depending on choice of connecting bolt Drilling distance B: Distance from centre of Minifix housing to shelf front edge (24
More informationEcoGlide Sliding Door System
SOLUTIONS FOR TRADE EcoGlide Sliding Door System November 2017 SOLUTIONS FOR TRADE CONTENTS Page 4 Page 5 Page 6-20 2100 Series Floor Guided Sliding Door System 3100 Series Wall Guided Sliding Door System
More informationLeveling Feet, Base Plates and Casters
Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.
More informationPro-Lock Retrofit Instruction Manual
Pro-Lock Retrofit Instruction Manual The manual provided here lists detailed steps on the most effective way to replace your Hurd and OEM Locks with a Pro- Lock unit. The steps outlined in this procedure
More informationSport-Thieme Safety Aluminium Mini Training Goal
Assembly instructions Art.-Nr.: 116 3852 Sport-Thieme Safety Aluminium Mini Training Goal 0218214 2018 Sport-Thieme GmbH D-38367 Grasleben Germany sport-thieme.com info @sport-thieme.com Phone: +49 53
More informationINDEX > CH.5 HANGING SUPPORTS TENTI SHELF SUPPORTS TENTI TENTI TENTI - 4C... TENTI TENTI TENTI TENTI
> C.5 ANGING SUPPORTS INDEX SELF SUPPORTS 1-3... 305 2-4... 306 3-4C... 307 4-5... 308 5-7... 309 6-8... 310 7-9... 311 305 > C.5 ANGING SUPPORTS Maximum loads for shelf supports The test levels that shelf
More informationCADprofi Table of contents list of new features in CADprofi 11.07:
11.07 Table of contents list of new features in CADprofi 11.07: - CADprofi Architectural - CADprofi Electrical - CADprofi Mechanical - CADprofi HVAC & Piping - General commands (affects all modules) -
More informationS H E D A S S E M B L Y I N S T R U C T I O N S
T I T A N R A N G E S H E D A S S E M B L Y I N S T R U C T I O N S 8 X 10 ft Approx = 2550 x 3140 cm COMPONENT LIST Component illustrations are given as a visual guide only and are not in proportion PART
More informationMISCELLANEOUS SIGN CONNECTION DETAILS TYPICAL ROUTE MARKER ASSEMBLIES SIGN TO POST MICHIGAN DEPARTMENT OF TRANSPORTATION
5-4" SEE DETAIL I COUPLING BAR ON 3 2-10" CANTILEVER SIGN SUPPORT TYPICAL ROUTE MARKER ASSEMBLIES 5/1 DIAMETER STAINLESS STEEL BOLT AND NYLON INSERT LOCK NUT SELF-ALIGNING STEEL REINFORCING PLATE ( TYPE
More informationAssembly. Item G7 Qty 1. Item D4. M10 x 55 mm Allen Bolt. Item D5. Qty 2. Item E13 Qty 4 M10 Flat Washer. Item B18. M8 x 30 mm Allen Bolt (Black)
ACCESSORY FITMENT LIST These are all the accessories you will need to complete the assembly of your product. The following accessories are supplied in a pack and should be checked before attempting assembly
More informationCompany profile WITH EVERY STEP WE MAKE, WE WANT TO KEEP CONTRIBUTING TO OUR GOOD REPUTATION OF A STRONG CZECH MANUFACTURER OF LOCKS AND FITTINGS
Furniture fittings Company profile TOKOZ a.s. is a company working in the field of security mechanisms for more than 90 years. Thanks to years of experience we have become real experts on manufacturing
More informationSport-Thieme Safety Aluminium Mini Training Goal
Assembly instructions Art.-Nr.: 116 3881 Sport-Thieme Safety Aluminium Mini Training Goal 0218214 2018 Sport-Thieme GmbH D-38367 Grasleben Germany sport-thieme.com info @sport-thieme.com Phone: +49 53
More informationaluminium profile system
aluminium profile system 63 AME System aluminium profiles overview series profiles introduction 80x80 x80 x80/180 x Aluminium profiles are provided with longitudinal grooves which can be used in conjunction
More informationReplacing worn out MS hinges
Replacing worn out MS hinges C. Zavatson, 4-3-2014, rev A For the hinging of ailerons, flaps, inboard gear doors and the elevators of the small tail, Lancair utilized MS20001 hinge material. Unfortunately
More informationMOUNTING INSTRUCTIONS
Standard Mounting Bracket Tilting Bracket* Mounting example Right side for upper tilt from 0 to 20 20 Spare parts: p/n SA197 Materials: extruded aluminum Hardware: stainless & zinc plated steel Dimensions
More informationRipple Construction Products Pvt Ltd
26 July 2017 1 Masonry: There is a tremendous variety of masonry bricks on the market. The different types of bricks (e.g. clay, sand-lime, or concrete bricks) are composed of different materials and are
More informationFull Overlay Door Panel Preparation and Installation Instructions for 2175, 2115, CLR2160 Models
Full Overlay Door Panel Preparation and Installation Instructions for 2175, 2115, CLR2160 Models www.u-lineservice.com Phone (414) 354-0300 FAX (414) 354-7905 Service & Parts Tech Lines Phone (800) 779-2547
More informationSection F SETTING TABLE
Section F SETTING TABLE December 2009 1F Index No. Part No. Description 1. 47-051635-001 Geared Rack 2. 11-051880-001 N.A. Truss Hd. Machine Screw (6 mm x 16 mm) 47-861008-001 R.O. Truss Hd. Machine Screw
More informationAn ASSA ABLOY Group company
An ASSA ABLOY Group company AS A SPECIALIST MANUFACTURER OF WINDOW ACCESSORIES FOR TOPHUNG OUTWARD PROJECTING WINDOWS, RIVALU OFFERS YOU A COMPLETE RANGE OF SOLUTIONS FOR THE CLOSING OF YOUR WINDOW IMPERVIOUSNESS
More informationKitchen Fittings Hanging Cabinets and Accessories
Cabinet hanger Knock-in version, load bearing capacity 130 kg/pair Depth adjustment Finish: Galvanized Concealed mounting of cabinet hanger behind the rear panel (Min. 16 mm free space required) Mounting
More informationMODEL NO.: MI / 42100
MODEL NO.: MI-50 / 00 MODEL NO.: MI-50 BOX 1 OF 6 ROUTER LIFT PARTS BREAKDOWN Router Lift Assembly 6 5 2 2 1 5 5 8 12 11 2 26 27 0 12 26 27 27 22 22 27 19 A 5 26 12 26 22 25 25 7 18 18 15 15 7 9 1 17 2
More informationTable and Furniture Base Fittings Table Legs and Table Bases
Square Stainless steel coloured laquered square Bright laquered square Area of application: For table and coffee tables Material: Plastic glide Finish/Colour: Table leg brushed, glide black Cross section:
More informationBÖMA GmbH Maschinenbau und Automatisierungstechnik
Construction kit index Profiles Aluminium grid 40 1.01 Aluminium grid 50 1.02 KP-40/50 Plastic profile 1.03 AP-40/50 Aluminium cover profile 1.03 SBT-F Sliding doors guide prof. 1.04 FL-40/50 Wear strip
More informationMITCHELL FURNITURE SYSTEMS, INC.
MITCHELL FURNITURE SYSTEMS, INC. MITCHELL WALL MOUNTED TABLE/BENCH SYSTEM: ARCHITECTURAL DATA Laminate, Backer & Adhesive GREENGUARD Certified Components PART I. - ATTENTION: SPECIFIER AND/OR ARCHITECT
More informationStandard Product. Free-Stand Cabinets 19-in. Mini-Rack Cabinet, Components and Accessories
Spec-00466 F763.422.2661 763.422.2588 Free-Stand Cabinets 19-in. Mini-Rack Cabinet, Components and Accessories Free-Stand Cabinets 19-in. Mini-Rack Cabinet, Components and Accessories 19-in. Mini-Rack
More informationClamping bolts Eccentrical cams clamping units
2.3 Shaft Clamping bolts Eccentrical cams clamping units 2.9 2.8 2.7 2.6 2.5 2.4 2.3 2.2 2.1 2.3 Clamping bolts, Eccentrical cams, Shaft clamping units Page 641 2.3 Clamping bolts, Eccentrical cams, Shaft
More informationset of safety brace steel cable draw-up gate kpl
0324101 7108020 8208100 Order-nr. Description Number 0324101 safety brace steel cable draw-up gate 2 7108020 hexagon-head tap bolt M8x20 galv. 2 8208100 hexagon nut M8 galv. 2 set of safety brace steel
More informationSmartCleat. Cable Cleats and Ties: SMARTCLEAT TREFOIL AND SINGLE from 25 to 99 mm cable. SmartCleat Trefoil CABLE TIES SMART SECURE PLATE
w Cable Cleats and Ties: is our range of patented short circuit approved cable cleats which are extremely compact and simple to install on any pre-slotted rung design. The has been comprehensively tested
More informationTuf-Lite III Fans 5000K Series Hub
Tuf-Lite III Fans 5000K Series Hub INSTALLATION MANUAL Hudson Tuf-Lite III fan blades Adjustable Pitch Fan Assembly 20 thru 30 Diameter Hudson Tuf-Lite III fan blades are of single piece fiberglass reinforced
More informationELECTRIC TOOL PARTS LIST
Hitachi Power Tools LIST E936 ELECTRIC TOOL PARTS LIST COMPOUND SAW Model 2004 4 20 (E1) 1 2 3 23 24 7 8 9 10 6 5 4 15 11 16 12 13 12 14 18 25 26 27 28 29 30 19 17 1 9 11 16 21 624 20 22 39 40 41 42 35
More informationDUALCASE VERSATILE ALUMINIUM SIGN SYSTEM
VERSATILE ALUMINIUM SIGN SYSTEM Universal Components Ltd. May 2007 Introduction Nothing beats DualCase for speed of fabrication, aesthetic appearance and easy maintenance. With the minium of components
More informationZ07- SWING GATE HOME AUTOMATION. zero Z07 - SWING GATE MOTOR SUPPLY V HOME AUTOMATION IT EN FR Z07.REV USER MANUAL AND CONFIGURATION PG1
Z07- SWING GATE Z07 - SWING GATE MOTOR SUPPLY 230-24V IT EN FR Z07.REV01.2018 USER MANUAL AND CONFIGURATION PG1 Z07 - SWING GATE PG2 Z07- SWING GATE INDEX 01. SAFETY INSTRUCTIONS 02. OPERATOR TECHNICAL
More informationSLIDING DOORS DIRECT ROLLER
SLIDING DOORS Single door fixed to wall NFK s Direct Sliding Door system, for installation to a solid wall. Height adjustable track supports can be quickly mounted to a wall allowing the glass to pass
More informationLINK OPENING SYSTEMS FOR FLAP AND DROP DOWN DOORS. click 2 INSTALLATION UNHANDED MECHANISM COVER CAP INSERTION
INSTALLATION Recommended fi xing countersunk head wood screws Ø 4 x 18 mm for door 18 mm min. thick. Pre-inserted screw Ø 3,5 x 16 mm - PZ2. The door bracket has to be placed with the narrow part of the
More informationFactory Assistance: Phone: Fax: Page 1
CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)
More informationTest Joints / Fixed Earthing Terminals
Test Joints / Fixed Earthing Terminals Partially isolated lead-in earthing rod Test joint with disconnecting sleeve Fixed earthing terminal with ring equipotential bonding 131 Disconnecting Sleeves FIXED
More information670 SCREWED FIX-IT KITS. Page WOOD SCREWS DOWEL PINS DOWELS STUDDING. Page Pages GROUP GROUP 651 EXTRACTOR GROUP 635 GROUP 650
Page...........556-559 635 WOOD SCREWS 650 DOWEL PINS 651 EXTRACTOR DOWELS 670 SCREWED STUDDING Page.......................560 Page.......................561 Page.......................561 Pages......................561
More information8x13.5 U-clamping extrusion type B19 6
Special purpose extrusions 13.5x50 panel clamp extrusion type A05 8 8x13.5 U-clamping extrusion type B19 6 11x30.5 support extrusion type B19 7 A special extrusion for clamping the wire mesh. The U-extrusion
More information