Direct Fastening Systems. Hilti. Outperform. Outlast.
|
|
- Howard Preston
- 5 years ago
- Views:
Transcription
1 Direct Fastening Systems Hilti. Outperform. Outlast. DX_Entry.indd :35:57 Uhr
2 Direct Fastening Systems Gas-driven tools & fasteners GX 100 Gas-Driven Fastening System 218 X-ECT cable tie holder / X-EKB cable clasp / X-EKS cable clamp / X-ET trunking fastener 219 X-EGN MX Nails in Magazine Strips of Powder-actuated tools DX 351 Powder Actuated Fastening Tool 220 DX 36 Powder Actuated Fastening Tool 221 DX 460/462 Powder Actuated Fastening Tool DX 76 Powder Actuated Fastening Tool 224 DX 860-ENP Powder Actuated Fastening Tool 225 Cartridges Accessories Nails for Powder-actuated systems NPH Siding and Decking Nail 233 DNH Nail - 15mm Washer 233, 253 NK(S) Nail 234 X-SL Forming Nail X-AL-H Nail 235 X-DNI Nail DW Drywall Nail - Plastic Top Hat X-ZF Nail ESD / X-EDNI Nail 238 EDS / ENKK Nail 239 ENP2K Nail 239, 240 X-ENP Nail 239, 240 EDNK Nail X-CR Nail X-DKH Nail - 15mm Washer 253 ed studs for Powder-actuated systems (E)M6, (E)M8, (E)M10 threaded studs X-BT 246 Premounted Composite fasteners for Powder-actuated systems X-SW Soft Washer 247 X-IE Insulation Fastener X-ET Trunking Nail 248 X-FS Forming Stop 248 X-GC Gunite Clip 248 X-FB/-DFB Metal Conduit/Pipe Clip for Concrete X-EFC Plastic Pipe Clip 249 X-CC / X-ECH Bunched Cable Holder / X-EKB Cable Clasp 250 X-HS ed Hanger for Concrete Fastener Components for Powder-actuated systems Washer DX Nails/X-FCM Grating Fastening disc/x-fcp Sealing Ring/X-FCP-R Fastening plate 254 Marking Characters for Powder-actuated systems Letters / s DX_Entry.indd :36:04 Uhr
3 Direct fastening systems Powder-actuated tools Product Code GX 100 DX 351 MX27 DX 460-F8 Applications Siding Decking Marking Wood on concrete Features and benefits Magazine Cartridges 6.8/11 (yellow, red) 6.8/11 (yellow, red) Nails 216 DX_Overview_en.indd :41:13 Uhr
4 Direct fastening systems Product code DX 462-CM DX 76 F15 DX 860-ENP Applications Siding Decking Marking Wood on concrete Features and benefits Magazine Cartridges 6.8/11 (green, yellow) 6.8/18 (blue, red, black) 6.8/18 (blue, red, yellow) Nails 217 DX_Overview_en.indd :41:20 Uhr
5 Gas-driven tools & fasteners GX 100 Gas-Driven Fastening System No batteries required! Applications : Concrete: For fl oors, walls and ceilings Repetitive fastening of metal track, hat-track and wood Metal profi le fastening to walls for suspended ceilings Steel: For beams and columns Repetitive fastening of metal track, hat-track, Z brackets and slip track Block, brick and sand limestone: Fastening of metal track and hat-track Technical Data: Contact pressure: Fastener length range: Fastener types: Magazine capacity: Power source type: Weight: 120 N mm X-EGN MX, X-GHP MX, X-GN MX drywall nails 40 nails GC 11 (gas can for 750 fastenings) 3.95 kg Features and Benefits No battery to charge, ever: Reliable. Easily removable, two position, adjustable tool nose: Optimum fastening quality and no tools needed for cleaning nail jams. Quality fastening on steel, standard and hard concrete: Wide range of applications. Curved magazine design and easy gas can loading: Good accessibilty. Open slots on magazine: Easy cleaning of debris. Attachable support leg: Improved stability and fastening quality. Easy, one-touch reset button: No ramrod needed. Up to 1000 fastenings per hour: Ideal for high-volume repetitive fastenings. Low, recoil, good tool balance and odorless gas: Comfortable to use. GX 100 Gas-actuated tool GX 100-E Gas-actuated tool GC 11 Gas Can (GB/F/E) GC 11 Gas Can HA (GB/F/E) DX_Gas_Inhalt_en.indd :42:48 Uhr
6 Gas-driven tools & fasteners X-EGN MX Nails in Magazine Strips of mm nails for steel 3 X-EGN 14 MX Gas nail X-GN MX Nails in Magazine Strips of mm nails for concrete, block and sand limestone 3 X-GN 20 MX Gas nail X-GN 27 MX Gas nail X-GN 32 MX Gas nail X-GN 39 MX Gas nail X-GHP MX Nails in Magazine Strips of mm nails for hard concrete 3 X-GHP 18 MX Gas nail X-EKB cable clasp X-EKB 16 FR MX Cable clasp X-EKB 16 MX Cable clasp X-EKB 4 FR MX Cable clasp X-EKB 4 MX Cable clasp X-EKB 8 FR MX Cable clasp X-EKB 8 MX Cable clasp X-ET trunking fastener X-ET DNIK-H27 Cable trunking fastener X-ECT cable tie holder Cable tie holder X-ECT FR MX Cable tie holder X-ECT MX Cable tie holder X-ECT UV MX Ceiling clip X-CC MX X-EKS cable clamp X-EKS 16 MX Electr. cable clamp X-EKS 20 MX Electr. cable clamp X-EKS 25 MX Electr. cable clamp X-EKS 32 MX Electr. cable clamp X-EKS 40 MX Electr. cable clamp DX_Gas_Inhalt_en.indd :42:58 Uhr
7 Powder-actuated tools DX 351 BT / BTG / M+E Powder actuated fastening tool Tool for electrical and instrumentation applications (for X-BT M10 (3/8 ) threaded studs) Applications : For light duty electrical applications (T-bars) For cable tray, channel, strut applications Technical Data: Automatic tool: Fastener types: For use with: Weight: Yes X-BT W SN12-R, X-BT W R, X-BT M SN12-R, X-BT M R X-351 BT FG fastener guide and X-351 BT P1024 piston (whitworth equipment) X-351 BT FG fastener guide and X-351 BT P1024 piston (metric equipment) 2.4 kg Features and benefits For precision fastening Coating protector To prevent damage to the coated steel Lightweight and small tool with low recoil For increased user comfort Cartridge power regulator Provides variable power choices For accurate nail driving Automatic piston return For increased productivity DX 351 BT Powder-actuated tool DX 351 (X-MX 27) Powder-actuated tool DX 351 Powder-actuated tool DX 351 BT G Powder-actuated tool DX 351 M+E Powder-actuated tool DX_Gas_Inhalt_en.indd :43:00 Uhr
8 Powder-actuated tools DX 36 Powder actuated fastening tool Single shot tool for general building construction applications / for single fasteners up 72 mm Technical Data: Automatic tool: Cartridge: Cartridge color/level: Fastener length range: Piston bore: Power adjustment regulator: Fastener material: Trades: Weight: No 6.8/11M Green, yellow, red mm 8 mm Yes Concrete, Steel BC, S&M 2.4 kg Features and Benefits Booster power regulator Provides variable power choices for accurate nail driving Durable construction For proven dependability Pole tool available for ceiling applications Increases productivity DX 36 Powder-actuated tool DX_Gas_Inhalt_en.indd :43:12 Uhr
9 Powder-actuated tools DX 460 / DX 460 MX 72 Powder actuated fastening tool Fully automatic powder-actuated tool for extremely quick and convenient fastening Applications : For repetitive fastenings to steel, concrete and sand stone with nails up to 72 mm (with magazine) and 97 mm (without magazine). Technical Data: DX 460 DX 460 MX 72 Fastener: X-DNI, X-EDNI, X-ZF, X-SL, X-FS, X-SW, X-CR and X-AL-H nails Cartridge: 6.8/11 M, in magazine strips of 10, 4 power levels (green, yellow, red, black) Lenght: 460 mm 460 mm Weight: 3.25 kg 3.53 kg incl. magazine Features and Benefits Versatile: Specialized X-IE fasteners cover all applications on material thickness mm Fast: Reliable repetitive fastening no drilling and anchoring needed Mobile: Complete independence from external power sources Low maintenance: Easy to take apart DX 460 IE Powder-actuated tool DX 460 F8 Powder-actuated tool DX 460 MX 72 Powder-actuated tool DX_Gas_Inhalt_en.indd :43:13 Uhr
10 Powder-actuated tools DX 462-CM / DX 462-HM Powder actuated marking tool Portable cold marking tool with polyurethane head Applications : Marking on metal surfaces up to 50 C. Steel mills: cold slabs, blooms, billets, steel sections etc. Heavy industry: aircraft components, ships, off-shore, automotive parts etc. Testing agencies: identifi cation and approval marking acc. to ISO 9000 Technical Data: Automatic tool: Marking head capacity: Piston bore: Power adjustment regulator: Weight: Yes 7 Characters (8.0 mm wide), 10 characters (5.6 mm wide) 15 mm Yes 3.9 kg Features and Benefits Portable: Total marking freedom - you decide when and where Fast: One marking every 5 seconds or every 30 seconds if characters are changed Versatile: Mark components of many shapes and sizes, at any location Easy to use: Consistent high-quality marking is effortless with the powder-actuated technique High-quality characters: Three character types for most applications. your own company logo from Hilti! Low maintenance: Take apart, clean and put back together - with no tools DX 462 CM Powder-actuated tool DX 462 F8 Powder-actuated tool DX 462 HM Powder-actuated tool DX 462 HM Powder-actuated tool DX_Gas_Inhalt_en.indd :43:18 Uhr
11 Powder-actuated tools DX 76 F15 Powder actuated fastening tool Fastening profi le metal sheets to steel structures Applications : Approved method for siding and decking applications, with approvals that cover the coordinated system of components consisting of the 6.8/18M cartridge, X-ENP nail for profi le metal sheets and the DX 76 powder- actuated fastening tool. Technical Data: Contact pressure: Fastener types: Optional magazine available: Piston bore: Power adjustment regulator: Weight: N X-ENP-19 L15, ENP2K-20 L15 Yes 15 mm Yes 3.83 kg Features and Benefits Tool single nails or studs easy access in tight corners Outstanding ergonomic design Single-fi nger trigger for comfortable operation Well-padded grip Good balance Solid piston stopper for long life Easy cleaning and maintenance Power regulation DX 76 F15 Powder-actuated tool DX 76 MX Powder-actuated tool DX_Gas_Inhalt_en.indd :43:21 Uhr
12 Powder-actuated tools DX 860-ENP Powder actuated fastening tool Decking tool for fastening profi led metal sheet Applications : For fastening profi le metal sheets on large roof and decking areas. Technical Data: Automatic tool: Contact pressure: Dimension (LxWxH): Fastener types: Magazine capacity: Magazine included: Piston bore: Power adjustment regulator: Weight: Yes 300 N 932 x 130 x 315 mm X-ENP-19 L15 MXR 40 nails yes 15 mm Yes kg Features and Benefits Extremely rapid fastening: magazine for 40 cartridges and 40 nails Rugged construction for high reliability Easy tool-less cleaning Solid piston stopper for long life Simple, tool-less cleaning and maintenance Outstanding operating comfort: Upright body position permits long periods of use without tiring Ergonomic grip and triggers Low recoil DX 860-ENP Powder-actuated tool DX_Gas_Inhalt_en.indd :43:24 Uhr
13 Powder-actuated tools 5.6/16 Single cartridges Single cartridges for DX E 37 and DX E 72 Special cartridge 5.6/16.22 brown Special cartridge 5.6/16.22 green Special cartridge 5.6/16.22 grey Special cartridge 5.6/16.22 red Special cartridge 5.6/16.22 yellow /10 M Collated cartridges Collated cartridges for DX 35 M BULK Special cartridge 6,3/10 green M BULK Special cartridge 6,3/10 red M BULK Special cartridge 6,3/10 yellow M Special cartridge 6,3/10 green M Special cartridge 6,3/10 red M Special cartridge 6,3/10 yellow /11 M Collated cartridges Collated cartridges for DX 36 M, DX 350, DX 450, DX A40, DX A41, DX 351, DX 35, DX A40I and DX 460 M Special cartridge 6,8/11 black M Special cartridge 6,8/11 BULK green M Special cartridge 6,8/11 BULK red M Special cartridge 6,8/11 BULK white M Special cartridge 6,8/11 BULK yellow M Special cartridge 6,8/11 green M Special cartridge 6,8/11 red M Special cartridge 6,8/11 white M Special cartridge 6,8/11 yellow /11 M High Precision cartridges Collated cartridges with a special power level which ensure high precision fastenings Special cartridge 6,8/11 M brown /18 M Collated cartridges Collated cartridges for DX 76, DX 750, DX 750 I, DX 650 M Special cartridge 6,8/18 black M Special cartridge 6,8/18 blue M Special cartridge 6,8/18 BULK blue M Special cartridge 6,8/18 BULK red M Special cartridge 6,8/18 BULK yellow M Special cartridge 6,8/18 green M Special cartridge 6,8/18 red M Special cartridge 6,8/18 yellow DX_Gas_Inhalt_en.indd :43:26 Uhr
14 Powder-actuated tools 6.8/18 Single cartridges Single cartridges for DX 600 Special cartridge 6,8/18 green Special cartridge 6,8/18 purple Special cartridge 6,8/18 red Special cartridge 6,8/18 yellow /18 M40 collated Cartridges Collated cartridges for DX 860-ENP, DX A 70 R M40 Special cartridge 6,8/18 black M40 Special cartridge 6,8/18 blue M40 Special cartridge 6,8/18 red Cleaning kits for DX Tools Flat and round brushes for cleaning powder actuated fastening tools DX E37/72 Cleaning kit DX 351 Cleaning kit DX 351 Cleaning kit DX 36 Cleaning kit DX 450 Cleaning kit DX 76/860 Cleaning kit X-460-CLEAN Cleaning kit DX Lubricants Sprays for cleaning and lubricate powder actuated fastening tools ML Spray ML Spray DX_Gas_Inhalt_en.indd :43:27 Uhr
15 Powder-actuated tools Fastener Fastener guide assy. Piston face Piston X-AL-H16 P8 X-AF 8K AL X-AP 8K-AL X-DNI...P8 X-AF 8K DNI X-AP 8K-DNI X-EDNI P8 X-AF 8K L (co-acting) DNI X-AP 8K-DNI X-EM P8 X-AF 8K-GR DN X-AP 8K-GR X-CRM P8 Centering ring 25 Centering ring X-EM10...P10 X-AF 10L Flat X-AP 10K X-EM10...P10 X-SS 10L Flat X-AP 10K X-M8...P8 X-SS 8K DNI X-AP 8K-DNI X-EM8...P8 X-AF 8K-GR DN X-AP 8K-GR X-DNI 32 MX X-AM DNI X-AP 8K-DNI X-AM32 X-EKB 8 / X-EKB 16 X-AF 8K EFP Flat X-AP 8K-E Adaptor EFP X-ECH-S/M/L X-AF 8K EFP Flat X-AP 8K-E Adaptor EFP X-IE X-AF IE AL X-AP IE X-AP IE X-DNH 37 P8 S15 X-AF 8K Flat X-AP Kwik DX-Kwik drill bit X-AP Kwik DAK 16 P8 X-AF 8K Flat X-AP Kwik DX_Gas_Inhalt_en.indd :43:28 Uhr
16 Powder-actuated tools Fastener Fastener guide assy. Piston face Piston X-DNI...P8 X-460-F8N DNI X-460-P mm X-DNI...P8 X-460-F8N DNI X-460-P mm X-EM10...P10 X-460-F Flat X-460-P mm X-EM10...P10 X-460-F10SS Flat X-460-P mm X-M8...P8 X-460-F8SS DNI X-460-P mm X-AL-H PS X-460-F AL X-460-P8AL mm X-DNI...P8 X-460-F DNI X-460-P mm X-460-P8W X-EM8...P8 X-460-F DNI X-460-P mm X-460-P8W X-DNI MX MX DNI X-460-P mm X-460-P8W X-IE X-460-FIE AL X-460-PIE mm 229 DX_Gas_Inhalt_en.indd :43:31 Uhr
17 Powder-actuated tools DX A40 & DX A41 accesories are not compatible with DX 460 DX 460 accessories are backward compatible DX A41 DX 460 Fastener guide Pistons Fastener guide Pistons X-AM 72 X-AP 8L-DNI 4797 X-MX X-460-P X-AF 8L X-460-F X-AF 8K X-AP 8K1-DNI X-460-F8N X-AF 8K X-460-F8N X-AF 8L S X-AP 8L-DNI 4797 X-460-F8S X-SS 8L X-460-F8SS X-460-P X-AF 8L WH No replacement X-AF 10L X-AP 10L X-460-F X-460-P X-SS 10L X-460-F10SS X-AF IE X-AF IE 52LAL X-460-FIE-L X-460-PIE-L no old version X-460-F8GR X-460-PGR no old version X-460-F8T X-460-P Buffer Buffer X-AA X-460-B DX 460 Fastener guides which can use different pistons Fastener guide Pistons X-MX X-460-P X-460-P8W X-460-F X-460-P X-460-PKwik X-460-P8AL X-460-P8W X-460-F8N X-460-P X-460-P8AL X-460-F8N X-460-P X-460-P8AL DX_Gas_Inhalt_en.indd :43:32 Uhr
18 Powder-actuated tools Baseplates and fastener guides for DX 351 X-FG8L351 Fastener guide assy X-FG8S351 Fastener guide assy X-FG8S351 Fastener guide assy X-FGMX351 Fastener guide assy X-EF Stabilizer X-EF Stabilizer Pistons for DX 351 Standard and special equipment X-P8AL-351 Piston X-P8L-351 Piston X-P8S-351 Piston Magazines for DX 351 For fastening collated nails MX 27 prea Magazine guideblock MX 32 prea Magazine guideblock Baseplates / Fastener guides for DX 460 X-460 FIE-L Fastener guide X-460-F10 Fastener guide X-460-F10SS Fastener guide X-460-F8 Fastener guide X-460-F8N10 Fastener guide X-460-F8N10 Fastener guide X-460-F8N1 Fastener guide X-460-F8SS Fastener guide X-460-F8S12 Fastener guide X-460-STAB Stabilizer X-460-WH23/36 Washer holder Change parts for DX 460 X-460-B Buffer Ramrod assy DX_Gas_Inhalt_en.indd :43:35 Uhr
19 Powder-actuated tools Pistons for DX 460 X-460 PIE-L Piston X-460-P Kwik Piston X-460-PSM Piston X-460-P10 Piston X-460-P8 Piston X-460-P8AL Piston X-460-P8W Piston Magazines for DX 460 MX 72 assy Nail magazine MX SM assy Steel magazine X-462 fastener guide X-462-F8 Fastener guide X-462-F8S12 Fastener guide X-462 piston X-462-P8 Piston X-462-P8AL Piston HVB equipment ing designation no. Conversion set HVB To convert DX 750 standard to DX 750 HVB. Consisting of: 75/HVB baseplate /HVB piston Stop ring X-HVB shear connectors ing designation Package contents no. X-HVB X-HVB X-HVB X-HVB X-HVB DX_Gas_Inhalt_en.indd :43:43 Uhr
20 Nails for powder-actuated systems NPH Siding and decking nail Fastening with DX Kwik method (pre drill) of roof decking and wall liners mm 4.5 NPH2-42L15 Sheet metal nail DNH Nail 15 mm washer General purpose nail with steel washer for DX Kwik applications mm 3.7 DNH 37 P8 S15 Gen l purpose nail X-DKH Nail 15 mm washer General purpose nail with steel washer for DX Kwik applications mm 4 DNH X-DKH 48 P8 S15 Gen l purpose nail X-RE nail Nail for interior fi nishing applications requiring repositioning of drywall tracks mm 3.7 X-RE 28-P8BK Drywall nail DX_Gas_Inhalt_en.indd :43:47 Uhr
21 Nails for powder-actuated systems NK Nail General purpose nail for DX 450 and D66L 4.2 NK 117D12 Gen l purpose nail NK 22S12 Gen l purpose nail NK 27S12 Gen l purpose nail NK 32S12 Gen l purpose nail NK 37S12 Gen l purpose nail NK 42S12 Gen l purpose nail NK 47S12 Gen l purpose nail NK 54S12 Gen l purpose nail NK 62S12 Gen l purpose nail NK 72S12 Gen l purpose nail D12 Gen l purpose nail NK NK 97D12 Gen l purpose nail NKS Nail General purpose nail for concrete, sandlime-masonry and steel 3.7 NKS 22S12 Gen l purpose nail NKS 22S12 Gen l purpose nail NKS 27S12 Gen l purpose nail NKS 27S12 /100 Gen l purpose nail NKS 32S12 Gen l purpose nail NKS 32S12 /100 Gen l purpose nail NKS 37S12 Gen l purpose nail NKS 37S12 /100 Gen l purpose nail NKS 42S12 Gen l purpose nail NKS 42S12 /100 Gen l purpose nail NKS 47S12 Gen l purpose nail NKS 47S12 /100 Gen l purpose nail NKS 54S12 Gen l purpose nail NKS 62S12 Gen l purpose nail NKS 72S12 Gen l purpose nail X-SL MX - Collated forming nail The ideal nail for the temporary fastening of wood to concrete 3.7 SL 44 MX Forming nail SL 47 MX Forming nail SL 47 MX Forming nail SL 54 MX Forming nail SL 54 MX Forming nail SL 62 MX Forming nail SL 62 MX Forming nail DX_Gas_Inhalt_en.indd :43:48 Uhr
22 Nails for powder-actuated systems X-SL forming nail The ideal nail for the temporary fastening of wood to concrete 3.7 SL 47 DP8 Forming nail SL 47 DP8 Forming nail SL 54 DP8 Forming nail SL 54 DP8 Forming nail SL 62 DP8 Forming nail SL 62 DP8 Forming nail SL 72 DP8 Forming nail X-AL-H THP Nail plastic top hat Hardened nail with top hat with high application limits for high strength concrete and steel 3.7 X-AL-H 12THP Gen l purpose nail X-AL-H 14THP Gen l purpose nail X-AL-H 19THP Gen l purpose nail X-AL-H 22THP Gen l purpose nail X-AL-H Nail Hardened nail with application limits for high strength concrete and steel 3.7 X-AL-H 16P8 Gen l purpose nail X-AL-H 19P8 Gen l purpose nail X-AL-H 22P8 Gen l purpose nail X-AL-H 22P8 BULK Gen l purpose nail X-AL-H 27P8 Gen l purpose nail X-AL-H 27P8 BULK Gen l purpose nail X-AL-H 32P8 Gen l purpose nail X-AL-H 37P8 Gen l purpose nail X-AL-H 42P8 Gen l purpose nail X-AL-H 47P8 Gen l purpose nail X-AL-H 52P8 Gen l purpose nail X-AL-H 57P8 Gen l purpose nail X-AL-H 62P8 Gen l purpose nail X-AL-H 67P8 Gen l purpose nail X-AL-H 72P8 Gen l purpose nail X-DNI Nail 12 mm steel washer General purpose nail with 12 mm steel washer for concrete and steel 3.7 X-DNI 22S12 Gen l purpose nail X-DNI 27S12 Gen l purpose nail X-DNI 37S12 Gen l purpose nail X-DNI 42S12 Gen l purpose nail X-DNI 47S12 Gen l purpose nail X-DNI 52S12 Gen l purpose nail X-DNI 62S12 Gen l purpose nail X-DNI 72S12 Gen l purpose nail X-DNI 97S12 Gen l purpose nail DX_Gas_Inhalt_en.indd :43:50 Uhr
23 Nails for powder-actuated systems X-DNI Nail General purpose nail for concrete and steel mm 3,7 X-DNI 19P8 Gen l purpose nail X-DNI 22P8 Gen l purpose nail X-DNI 27P8 Gen l purpose nail X-DNI 27P8 Gen l purpose nail X-DNI 32P8 Gen l purpose nail X-DNI 37P8 Gen l purpose nail X-DNI 42P8 Gen l purpose nail X-DNI 47P8 Gen l purpose nail X-DNI 52P8 Gen l purpose nail X-DNI 57P8 Gen l purpose nail X-DNI 62P8 Gen l purpose nail X-DNI 72P8 Gen l purpose nail X-DNI 82P8 Gen l purpose nail ,7 X-DNI 97P8 Gen l purpose nail X-DNI Nail 15 mm 36 mm steel washer General purpose nail with additional steel washer for concrete and steel 3.7 X-DNI 27P8S15 Gen l purpose nail X-DNI 32P8S15 Gen l purpose nail X-DNI 32P8S36 Gen l purpose nail X-DNI 52P8S36 Gen l purpose nail X-DNI 57P8S36 Gen l purpose nail X-DNI 72P8S36 Gen l purpose nail X-DNI MX Nail Collated general purpose nail for concrete and steel 3,7 X-DNI 19MX Gen l purpose nail X-DNI 22MX Gen l purpose nail X-DNI 27MX Gen l purpose nail X-DNI 32MX Gen l purpose nail ,7 X-DNI 42MX Gen l purpose nail X-DNI 47MX Gen l purpose nail X-DNI 52MX Gen l purpose nail X-DNI 57MX Gen l purpose nail X-DNI 62MX Gen l purpose nail X-DNI 72MX Gen l purpose nail DW Drywall Nail plastic top hat Standard drywall nail 3 X-DW 20 THP Drywall nail X-DW 27 THP Drywall nail X-DW 39 THP Drywall nail DX_Gas_Inhalt_en.indd :43:51 Uhr
24 Nails for powder-actuated systems DW MX Drywall nail Collated standard drywall nail 3 X-DW 20 MX Drywall nail X-DW 27 MX Drywall nail X-ZF Nail metal top hat Nail with metal top hat for drywall and metal sheet applications on concrete and steel 3.7 X-ZF 16P8TH Gen l purpose nail X-ZF 22P8THB Gen l purpose nail X-ZF 27 P8TH Gen l purpose nail X-ZF 27P8TH Gen l purpose nail X-ZF Nail 23 mm 36 mm steel washer General purpose nail with additional steel washer for standard applications on concrete and steel X-ZF 27P8S23 Gen l purpose nail X-ZF 27P8S36 Gen l purpose nail X-ZF 32P8S23 Gen l purpose nail X-ZF 32P8S36 Gen l purpose nail X-ZF 37P8S23 Gen l purpose nail X-ZF 37P8S36 Gen l purpose nail X-ZF 42P8S23 Gen l purpose nail X-ZF 47P8S23 Gen l purpose nail X-ZF 52P8S36 Gen l purpose nail X-ZF 62P8S36 Gen l purpose nail X-ZF 72 P8S36 Gen l purpose nail X-ZF Nail General purpose nail for standard applications concrete, sandlime masonry and steel 3.5 X-ZF 22P8 Gen l purpose nail X-ZF 27P8 Gen l purpose nail X-ZF 32P8 Gen l purpose nail X-ZF 37P8 Gen l purpose nail X-ZF 47P8 Gen l purpose nail X-ZF 52P8 Gen l purpose nail X-ZF 62P8 Gen l purpose nail X-ZF 72P8 Gen l purpose nail DX_Gas_Inhalt_en.indd :43:52 Uhr
25 Nails for powder-actuated systems X-ZF MX Nail Collated general purpose nail for standard applications concrete and steel 3.7 X-ZF 14MX Gen l purpose nail X-ZF 20MX Gen l purpose nail X-ZF 22MX Gen l purpose nail X-ZF 27MX Gen l purpose nail X-ZF 32MX Gen l purpose nail X-ZF 37MX Gen l purpose nail X-ZF 42MX Gen l purpose nail X-ZF 47MX Gen l purpose nail X-ZF 52MX Gen l purpose nail X-ZF 57MX Gen l purpose nail X-ZF 62MX Gen l purpose nail X-ZF 72MX Gen l purpose nail ESD Nail Drywall nail for fastenings on steel 3.7 ESD 16P8TH Drive pin X-EDNI Nail Standard nail for steel fastenings 3.7 X-EDNI 12P8 Gen l purpose nail X-EDNI 16P8 Gen l purpose nail X-EDNI 16S12 Gen l purpose nail X-EDNI 19P8 Gen l purpose nail X-EDNI 19S12 Gen l purpose nail X-EDNI 22P8 Gen l purpose nail X-EDNI 22S12 Gen l purpose nail X-EDNIH 16S12 Gen l purpose nail X-EDNI Nail Standard nail for steel fastenings 3.7 X-EDNI 12P8 Gen l purpose nail X-EDNI 16P8 Gen l purpose nail X-EDNI 16S12 Gen l purpose nail X-EDNI 19P8 Gen l purpose nail X-EDNI 19S12 Gen l purpose nail X-EDNI 22P8 Gen l purpose nail X-EDNI 22S12 Gen l purpose nail X-EDNIH 16S12 Gen l purpose nail DX_Gas_Inhalt_en.indd :43:53 Uhr
26 Nails for powder-actuated systems EDS Nail Heavy duty nail for fastenings into steel 4.5 EDS 19P10 Drive pin EDS 22P10 Drive pin EDS 27P10 Drive pin EDNK Nail General purpose nail for thin steel 3.7 EDNK 20P8TH Drive pin EDNK 20P8TH Drive pin ENKK Nail General purpose nail for thin steel (DX 450) 3.7 ENKK 20S12 Gen l purpose nail X-ENP Nail Single siding and decking nail 4.5 X-ENP-19 L15 Sheet metal nail X-ENP MXR Nail Collated, hardened siding and decking nail for DX 76 MX 4.5 X-ENP-19 L15MXR Sheet metal nail ENP2K Nail Siding and decking nail for thin base materials 3.7 ENP2K-20L15 Sheet metal nail ENKK Nail General purpose nail for thin steel (DX 450) 3.7 ENKK 20S12 Gen l purpose nail X-ENP Nail Single siding and decking nail 4.5 X-ENP-19 L15 Sheet metal nail DX_Gas_Inhalt_en.indd :43:56 Uhr
27 Nails for powder-actuated systems X-ENP MXR Nail Collated, hardened siding and decking nail for DX 76 MX 4.5 X-ENP-19 L15MXR Sheet metal nail ENP2K Nail Siding and decking nail for thin base materials 3.7 ENP2K-20L15 Sheet metal nail X-ENP MX Nail Collated, hardened siding and decking nail 4.5 X-ENP-19 L15MX Sheet metal nail ENP2K MX Nail Collated siding and decking nail for thin base materials 3.7 ENP2K-20L15MX Sheet metal nail X-CR Nail 12mm Washer Stainless steel nails with steel washer for fastenings on concrete, sandlime-masonry and steel 3.7 X-CR 14 D12 Gen l purpose nail X-CR 16 S12 Gen l purpose nail X-CR 18 S12 Gen l purpose nail X-CR 21 S12 Gen l purpose nail X-CR 24 S12 Gen l purpose nail X-CR 29 S12 Gen l purpose nail X-CR 34 S12 Gen l purpose nail X-CR 39 S12 Gen l purpose nail X-CR 44 S12 Gen l purpose nail EDN(K) MX - Nail Collated high shear nails for decking bar joist 3.7 X-EDN 19THQ12M Drive pin X-EDNK 22THQ12M Drive pin X-ENP HVB Nails Single hardened siding and decking nail 4.5 X-ENP-21 HVB Sheet metal nail DX_Gas_Inhalt_en.indd :43:59 Uhr
28 Nails for powder-actuated systems X-CR Nail Stainless steel nails for fastenings on concrete, sandlime-masonry and steel 3.7 X-CR 14 P8 Gen l purpose nail X-CR 16 P8 Gen l purpose nail X-CR 18 P8 Gen l purpose nail X-CR 21 P8 Gen l purpose nail X-CR 24 P8 Gen l purpose nail X-CR 29 P8 Gen l purpose nail X-CR 34 P8 Gen l purpose nail X-CR 39 P8 Gen l purpose nail X-CR 44P8 Gen l purpose nail X-CR 54 P8 Gen l purpose nail X-CR Nail - Steel washer Stainless steel nails with additional steel washer for DX Kwik applications 4 X-CR 39 P8 S12 Gen l purpose nail X-CR 44 P8 S12 Gen l purpose nail X-CR 48 P8 S15 Gen l purpose nail EDN(K) Nail High shear nails for decking nar joist 3.7 X-EDN 19THQ12 Drive pin X-EDNK 22THQ12 Drive pin M6 ed stud for concrete 8 mm washer (metric) ed stud for fastenings on concrete 3.7 M6 11 X-M FP8 ed stud M6 11 X-M FP8 ed stud M6 11 X-M FP8 ed stud M6 11 X-M D8 ed stud M6 20 X-M FP8 ed stud M6 20 X-M FP8 ed stud M6 20 X-M D8 ed stud M6 8 X-M6-8-17FP8 ed stud M6 8 X-M6-8-22FP8 ed stud M6 8 X-M6-8-27FP8 ed stud M6 8 X-M6-8-32D8 ed stud M6 8 X-M6-8-42D8 ed stud DX_Gas_Inhalt_en.indd :44:02 Uhr
29 ed studs for powder-actuated systems M6H (Kwik) ed stud for concrete 8 mm washer (metric) ed stud for fastenings of Kwik applications on concrete 3.7 M6 15 X-M6H FP8 ed stud M6 20 X-M6H 20/37-FP8 ed stud M6 ed stud for concrete 12 mm washer (metric) ed stud for fastenings on concrete 3.7 M6 11 X-M D12 ed stud M6 11 X-M D12 ed stud M6 11 X-M D12 ed stud M6 11 X-M D12 ed stud M6 11 X-M D12 ed stud M6 11 X-M D12 ed stud M6 20 X-M D12 ed stud M6 20 X-M D12 ed stud M6 20 X-M D12 ed stud M6 20 X-M D12 ed stud M6 20 X-M D12 ed stud M6 8 X-M6-8-17D12 ed stud M6 8 X-M6-8-22D12 ed stud M6 8 X-M6-8-27D12 ed stud M6 8 X-M6-8-32D12 ed stud M6 8 X-M6-8-52D12 ed stud M6 8 X-M6-8-72D12 ed stud M6 8 X-M6-8-95D12 ed stud M8 ed stud for concrete 8 mm Washer (metric) ed stud for fastenings on concrete 3.7 M8 15 X-M P8 ed stud M8 15 X-M P8 ed stud X-M P8 ed stud M8 20 X-M P8 ed stud X-M P8 ed stud M8H (Kwik) ed stud for concrete 8 mm Washer (metric) ed stud for fastenings of Kwik applications on concrete 4.5 M8 25 X-M8H/ P8 ed stud M8 15 X-M8H/ P8 ed stud DX_Gas_Inhalt_en.indd :44:04 Uhr
30 ed studs for powder-actuated systems M 10 ed stud for concrete 10 mm washer (metric) ed stud for fastenings on concrete M P10 ed stud M P10 ed stud M10 ed stud for concrete 12 mm washer (metric) ed stud for fastenings on concrete M D12 ed stud M D12 ed stud X-CR M8 (Kwik) Stainless steel stud for concrete 8 mm washer (metric) Stainless steel stud for DX Kwik applications on concrete 4.5 M8 14 X-CR M P8 ed stud M8 22 X-CR M P8 ed stud EW6 ed stud for steel 12 mm washer (whitworth) ed stud for fastenings on steel in /4 11 X-EW D12 ed stud /4 11 X-EW P12 ed stud /4 20 X-EW D12 ed stud /4 20 X-EW P12 ed stud /4 38 X-EW P12 ed stud X-CR M6 ed stud for concrete 8 mm Washer (metric) Stainless steel stud for concrete 3.7 M6 11 X-CR M FP8 ed stud M6 22 X-CR M FP8 ed stud EM6 ed stud for steel 8 mm washer (metric) ed stud for fastenings on steel 3.7 M6 11 X-EM FP8 ed stud X-EM FP8 ed stud M6 20 X-EM FP8 ed stud X-EM FP8 ed stud DX_Gas_Inhalt_en.indd :44:05 Uhr
31 ed studs for powder-actuated systems EM6 ed stud for steel 12 mm washer (metric) ed stud for fastenings on steel 3.7 M6 20 X-EM D12 ed stud M6 11 X-EM P12 ed stud M6 11 X-EM P12 ed stud M6 20 X-EM D12 ed stud M6 20 X-EM P12 ed stud M6 20 X-EM P12 ed stud M6 8 X-EM P12 ed stud EM6H ed stud for steel 8 mm washer (metric) Hardened stud for underwater-applications EM6H-20-20MF8 ed stud EM6H ed stud for steel 12 mm washer (metric) Hardened stud for fastenings on steel X-EM 6H P12 ed stud X-EM 6H-11-12P12 ed stud EM8 ed stud for steel 8 mm washer (metric) ed stud for fastenings on steel 4 M8 11 X-EM P8 ed stud M8 15 X-EM P8 ed stud X-EM P8 ed stud EM8 ed stud 10 mm washer (metric) ed stud for fastenings on steel 4.5 M8 15 EM FP10 ed stud EM8 ed stud 12 mm washer (metric) ed stud for fastenings on steel M8 11 EM P12 ed stud M8 15 EM P12 ed stud M8 25 EM P12 ed stud M8 35 EM P12 ed stud DX_Gas_Inhalt_en.indd :44:07 Uhr
32 ed studs for powder-actuated systems EM10 ed stud for steel 10 mm washer (metric) ed stud for fastenings on steel 4.5 M10 24 X-EM P10 ed stud EM10 ed stud for steel 12 mm washer (metric) ed stud for fastenings on steel 4.5 M10 24 X-EM P12 ed stud X-CR M8 ed stud for steel 8 mm washer (metric) Stainless steel stud for steel 4.5 M8 11 X-CR M P8 ed stud M8 22 X-CR M P8 ed stud X-CR M6 ed stud for steel 8 mm washer (metric) Stainless steel stud for steel 3.7 M6 11 X-CR M FP8 ed stud M6 22 X-CR M FP8 ed stud X-CRM10 ed stud for steel 12 mm washer (metric) Stainless steel stud for steel X-CR M P12 ed stud X-CRM8 Grating stud for steel 12 mm Washer (metric) Stainless steel grating stud for steel X-CR M P12 ed stud DX_Gas_Inhalt_en.indd :44:08 Uhr
33 ed studs for powder-actuated systems X-BT W10 ed stud for coated steel (whitworth) Stainless steel stud for coated steel (Emperic) in. 4.5 W10 3/8 X-BT W SN12-R ed stud W10 X-BT W R ed stud X-BT M10 ed stud for coated steel (metric) Stainless steel stud for coated steel mm (Emperic) mm length mm Q uantity 4.5 M X-BT M SN12-R ed stud M10 26 X-BT M R ed stud X-BT M8 ed stud for coated steel (metric) Stainless steel grating stud for coated steel mm (Emperic) mm length mm 4.5 M X-BT M SN12-R ed stud M8 16 X-BT M R ed stud X-CRM8 Industrial flooring stud for steel 8 mm washer (metric) Stainless steel stud for fl oorplate and grating applications mm mm (Emperic) mm length mm X-CR M P8 ed stud X-CR M P8 ed stud X-CRM8 Industrial flooring stud for steel 10 mm washer (metric) Stainless steel stud for fl oorplate and grating applications mm mm length mm X-CR M FP10 ed stud X-CR M FP10 ed stud DX_Gas_Inhalt_en.indd :44:10 Uhr
34 Premounted composite fasteners for powder-actuated systems X-SW 30 Soft washer Soft washer (30 mm. dia. plate) with premounted X-ZF nail for concrete and steel 3.5 X-SW 30 ZF37 Pin with soft washer X-SW 30 ZF37 Pin with soft washer X-SW 30 ZF47 Pin with soft washer X-SW 30 ZF47 Pin with soft washer X-SW 30 ZF62 Pin with soft washer X-SW 30 ZF62 Pin with soft washer X-SW 30 Soft washer X-SW 60 Soft washer Soft washer (60 mm. dia. plate) with premounted X-ZF nail for concrete and steel 3.5 X-SW 60 ZF37 Pin with soft washer X-SW 60 ZF47 Pin with soft washer X-SW 60 ZF62 Pin with soft washer X-SW 60 Soft washer X-IE 6 Insulation fastener Insulation fastener with premounted nail for concrete (up to 45 N/mm2) and steel 4.5 X-IE Insulation fastener X-IE Insulation fastener X-IE Insulation fastener X-IE 6-25 Insulation fastener X-IE 6-30 Insulation fastener X-IE 6-35 Insulation fastener X-IE 6-40 Insulation fastener X-IE 6-45 Insulation fastener X-IE 6-50 Insulation fastener X-IE 6-60 Insulation fastener X-IE 6-70 Insulation fastener X-IE 6-75 Insulation fastener X-IE 6-80 Insulation fastener X-IE 6-90 Insulation fastener X-IE 6 CR Insulation fastener Insulation fastener with premounted X-CR stainless steel nail for concrete and steel 4.5 X-IE CR72 Insulation fastener X-IE 6-60 CR72 Insulation fastener X-IE 6-80 CR72 Insulation fastener X-IE 6-85 CR72 Insulation fastener DX_Gas_Inhalt_en.indd :44:13 Uhr
35 Premounted composite fasteners for powder-actuated systems X-IE 9 Insulation fastener Insulation fastener with premounted nail for high strength concrete and steel 4.5 X-IE Insulation fastener X-IE Insulation fastener X-IE 9-40 Insulation fastener X-IE 9-50 Insulation fastener X-IE 9-60 Insulation fastener X-IE 9-70 Insulation fastener X-IE 9-75 Insulation fastener X-IE 9-80 Insulation fastener X-FS Forming stop For quick positioning of concrete forms with pinpoint accuracy X-FS MX Forming spacer X-FS ZF 52 Forming spacer X-FS ZF 72 Forming spacer X-GC Gunite clip Stand-off fastener for reinforcing bars 3.5 X-GC ZF 37 Gunite clip X-ET Trunking nail Trunking fastener with premounted X-DNI hardened nail 3.7 X-ET DNIK-H 27 Cable trunking fastener X-FB DNI Metal conduit / pipe clip for concrete Metal conduit/pipe clip with premounted X-DNI standard nail 3.7 X-FB 13-DNI27 Conduit clip X-FB 16-DNI 19 Conduit clip X-FB 16-DNI27 Conduit clip X-FB 18-DNI27 Conduit clip X-FB 20-DNI 19 Conduit clip X-FB 22-DNI27 Conduit clip X-FB 24-DNI27 Conduit clip X-FB 28-DNI27 Conduit clip X-FB 35-DNI27 Conduit clip X-FB 40-DNI27 Conduit clip DX_Gas_Inhalt_en.indd :44:14 Uhr
36 Premounted composite fasteners for powder-actuated systems X-FB DNI Iso metal conduit pipe clip for concrete Metal conduit/pipe clip with premounted X-DNI standard nail 3.7 X-FB 26/30-DNI27 Conduit clip X-FB 30/40-DNI27 Conduit clip X-FB 35/40-DNI27 Conduit clip X-FB ZF Metal conduit / pipe clip for concrete Metal conduitp/pipe clip with premounted X-ZF standard nail 3.7 X-FB 18-ZF27 Conduit clip X-FB 20-ZF27 Conduit clip X-FB 22-ZF27 Conduit clip X-FB 24-ZF27 Conduit clip X-FB 28-ZF27 Conduit clip X-DFB DNI Metal conduit / pipe clip for concrete Metal conduit/pipe clip with premounted X-DNI standard nail 3.7 X-DFB 16-DNI27 Butterfly conduit clip X-DFB 18-DNI27 Butterfly conduit clip X-DFB 20-DNI27 Butterfly conduit clip X-DFB 22-DNI27 Butterfly conduit clip X-DFB 24-DNI27 Butterfly conduit clip X-DFB 28-DNI27 Butterfly conduit clip X-DFB 35-DNI27 Butterfly conduit clip X-DFB 40-DNI27 Butterfly conduit clip X-DFB ZF Metal conduit / pipe clip for concrete Metal conduit/pipe clip with premounted X-ZF standard nail 3.7 X-DFB 18-ZF27 Butterfly conduit clip X-DFB 20-ZF27 Butterfly conduit clip X-DFB 22-ZF27 Butterfly conduit clip X-DFB 24-ZF27 Butterfly conduit clip X-DFB 28-ZF27 Butterfly conduit clip X-EFC Plastic pipe clip Plastic conduit/pipe clip with premounted X-DNI standard nail 3.7 X-EFC 1 DNI 27 Flexible conduit clip X-EFC 2 DNI 27 Flexible conduit clip DX_Gas_Inhalt_en.indd :44:16 Uhr
37 Premounted composite fasteners for powder-actuated systems X-ECH Bunched cable holder Bunched cable holder with premounted X-DNI hardened nail 3.7 X-ECH-L DNI-H37 PH Bunched-cable holder X-ECH-L DNI-H42 PH Bunched-cable holder X-ECH-M DNI-H37 PH Bunched-cable holder X-ECH-M DNI-H42 PH Bunched-cable holder X-ECH-S DNI-H37 PH Bunched-cable holder X-ECH-S DNI-H42 PH Bunched-cable holder X-ECH FR Bunched cable holder fire resistant Fire resistant bunched cable holder with premounted X-DNI hardened nail 3.7 X-ECH/FR-L DNI-H42 Bunched-cable holder X-ECH/FR-M DNI-H37 Bunched-cable holder X-ECH/FR-M DNI-H42 Bunched-cable holder X-ECH/FR-S DNI-H37 Bunched-cable holder X-ECH/FR-S DNI-H42 Bunched-cable holder X-EKB DNI Cable clasp Cable clasp with premounted X-DNI hardened nail Max. allowable load 3.7 X-EKB 16 DNI-H37 PH Cable clasp X-EKB 16 DNI-H42 PH Cable clasp X-EKB 8 DNI-H37 PH Cable clasp X-EKB 8 DNI-H42 PH Cable clasp X-EKB FWI Cable clasp fire resistant Fire resistant cable clasp with premounted X-DNI hardened nail Max. allowable load 3.7 X-EKB FWI 16 DNI-H37 PH Cable clasp X-EKB FWI 16 DNI-H42 PH Cable clasp X-EKB FWI 8 DNI-H37 PH Cable clasp X-EKB FWI 8 DNI-H42 PH Cable clasp X-CC AL-H Ceiling clip for concrete Ceiling clip with premounted X-AL-H nail for high strength concrete 4.5 X-CC AL27P8 Ceiling clip X-CC DKH (Kwik) ceiling clip for concrete Ceiling clip with premounted DKH nail for DX Kwik applications on concrete X-CC DKH48P8S15 Ceiling clip DX_Gas_Inhalt_en.indd :44:18 Uhr
38 Premounted composite fasteners for powder-actuated systems X-CC DNI Ceiling clip for concrete Ceiling clip with premounted X-DNI nail for concrete up to 45 N/mm2 3.7 X-CC DNI32P8 Ceiling clip X-HS AL-H ed hanger for concrete (metric) The versatile hanger with premounted X-AL-H nail for high strength concrete 4.5 M6 X-HS M6 AL-H 27 P8S15 Ceiling hanger X-HS M8 AL-H 27 P8S15 Ceiling hanger X-HS AL-H ed hanger for Concrete (whitworth) The versatile hanger with premounted X-AL-H nail for high strength concrete 4.5 X-HS W10 AL-H 27 P8S15 Ceiling hanger X-HS DKH (Kwik) ed hanger for concrete (metric) The versatile hanger with premounted DKH nail for DX Kwik applications on concrete 4 M10 X-HS M10-DKH48P8S15 Ceiling hanger M6 X-HS M6-DKH48P8S15 Ceiling hanger M8 X-HS M8-DKH48P8S15 Ceiling hanger X-HS DNI ed hanger for concrete (whitworth) The versatile hanger with premounted X-DNI nail for concrete up to 45 N/mm X-HS W10 DNI 32 P8S15 Ceiling hanger X-HS W10 NK 32 P12S15 Ceiling hanger X-HS W6 DNI 32 P8S15 Ceiling hanger X-HS DNI ed hanger for concrete (metric) The versatile hanger with premounted X-DNI nail for concrete up to 45 N/mm X-HS M10 DNI 32 P8S15 Ceiling hanger X-HS M6-DNI 32 P8S15 Ceiling hanger X-HS M8 DNI 32 P8S15 Ceiling hanger DX_Gas_Inhalt_en.indd :44:20 Uhr
39 Premounted composite fasteners for powder-actuated systems X-CC EDNI Ceiling clip for steel Ceiling clip with premounted X-EDNI nail for steel 3.7 X-CC EDNI16P8 Ceiling clip X-HS EDNI ed hanger for concrete (metric) The versatile hanger with premounted X-EDNI nail for steel 3.7 X-HS M10 EDNI 19 P8S15 Ceiling hanger M6 X-HS M6 EDNI 19 P8S15 Ceiling hanger X-HS M8 EDNI 19 P8S15 Ceiling hanger X-HS EDNI ed hanger for concrete (whitworth) The versatile hanger with premounted X-EDNI nail for steel 3.7 X-HS W10 EDNI 19 P8S15 Ceiling hanger X-HS W6 EDNI 19 P8S15 Ceiling hanger X-CR M8 (Kwik) Stainless steel stud for concrete 8 mm washer (metric) Stainless steel stud for DX Kwik applications on concrete 4.5 M8 14 X-CR M P8 ed stud M8 22 X-CR M P8 ed stud M8H (Kwik) ed stud for concrete 8 mm washer (metric) ed stud for fastenings of Kwik applications on concrete 4.5 M8 25 X-M8H/ P8 ed stud M8 15 X-M8H/ P8 ed stud M6H (Kwik) ed stud for concrete 8 mm washer (metric) ed stud for fastenings of Kwik applications on concrete 3.7 M6 15 X-M6H FP8 ed stud M6 20 X-M6H 20/37-FP8 ed stud DX_Gas_Inhalt_en.indd :44:22 Uhr
40 Premounted composite fasteners for powder-actuated systems X-CR Nail - Steel washer Stainless steel nails with additional steel washer for DX Kwik applications 4 X-CR 39 P8 S12 Gen l purpose nail X-CR 44 P8 S12 Gen l purpose nail X-CR 48 P8 S15 Gen l purpose nail X-CC DKH (Kwik) ceiling clip for concrete Ceiling clip with premounted DKH nail for DX Kwik applications on concrete 4 X-CC DKH48P8S15 Ceiling clip DNH Nail 15mm washer General purpose nail with steel washer for DX Kwik applications 3.7 DNH 37 P8 S15 Gen l purpose nail X-DKH Nail 15 mm washer General purpose nail with steel washer for DX Kwik applications 4 X-DKH 48 P8 S15 Gen l purpose nail X-HS DKH (Kwik) ed hanger for concrete (metric) The versatile hanger with premounted DKH nail for DX Kwik applications on concrete 4 M10 X-HS M10-DKH48P8S15 Ceiling hanger M6 X-HS M6-DKH48P8S15 Ceiling hanger M8 X-HS M8-DKH48P8S15 Ceiling hanger DX_Gas_Inhalt_en.indd :44:24 Uhr
41 Premounted composite fasteners for powder-actuated systems X-FCM Grating fastening disc Zinc coated disc for grating applications on steel Fastener height mm X-FCM 11/4 Grating disc X-FCM 25/30 Grating disc X-FCM 35/40 Grating disc X-FCM 45/50 Grating disc X-FCM-M Grating fastening disc Hot-dipped galvanised type disc for grating applications on steel Fastener height mm 1/4 1 1/2 X-FCM-M 1 1/4 Grating disc X-FCM-M 25/30 Grating disc X-FCM-M 35/40 Grating disc X-FCM-M 45/50 Grating disc X-FCP-R Checkerplate fastening disc Stainless steel disc for checkerplate applications on steel Fastener height mm 5 13 X-FCP-R 5/10 Grating disc X-FCP Sealing ring Chemical resistant neoprene washer Fastener height mm X-FCP Sealing ring X-FCM-R Grating fastening disc Stainless steel disc for grating applications on steel and metal Fastener height mm X-FCM-R 1 1/4 Grating disc X-FCM-R 25/30 Grating disc X-FCM-R 35/40 Grating disc X-FCM-R 45/50Grating disc Washers for DX nails Fastener height mm R23 Washer R36 Washer DX_Gas_Inhalt_en.indd :44:25 Uhr
42 Powder-actuated marking characters Letters for Low stress marking 6 mm high For markings with 10 characters B5,6/6 A Marking character B5,6/6 B Marking character B5,6/6 C Marking character B5,6/6 D Marking character B5,6/6 E Marking character B5,6/6 F Marking character B5,6/6 G Marking character B5,6/6 H Marking character B5,6/6 I Marking character B5,6/6 J Marking character B5,6/6 K Marking character B5,6/6 L Marking character B5,6/6 M Marking character B5,6/6 N Marking character B5,6/6 O Marking character B5,6/6 P Marking character B5,6/6 Q Marking character B5,6/6 R Marking character B5,6/6 S Marking character B5,6/6 T Marking character B5,6/6 U Marking character B5,6/6 V Marking character B5,6/6 W Marking character B5,6/6 X Marking character B5,6/6 Y Marking character B5,6/6 Z Marking character HML EB 60 A-Z Marking character set s for Low Stress Marking 6 mm high For markings with 10 characters B5,6/6 0 Marking character B5,6/6 1 Marking character B5,6/6 2 Marking character B5,6/6 3 Marking character B5,6/6 4 Marking character B5,6/6 5 Marking character B5,6/6 6 Marking character B5,6/6 7 Marking character B5,6/6 8 Marking character B5,6/6 9 Marking character HMC EB set Marking character DX_Gas_Inhalt_en.indd :44:27 Uhr
43 Powder-actuated marking characters Letters for Sharp Marking 10 mm High For markings with 10 characters X-MC S 5.6/10 A Marking character X-MC S 5.6/10 A-Z set Marking character X-MC S 5.6/10 B Marking character X-MC S 5.6/10 C Marking character X-MC S 5.6/10 D Marking character X-MC S 5.6/10 E Marking character X-MC S 5.6/10 F Marking character X-MC S 5.6/10 G Marking character X-MC S 5.6/10 H Marking character X-MC S 5.6/10 I Marking character X-MC S 5.6/10 J Marking character X-MC S 5.6/10 K Marking character X-MC S 5.6/10 L Marking character X-MC S 5.6/10 M Marking character X-MC S 5.6/10 N Marking character X-MC S 5.6/10 O Marking character X-MC S 5.6/10 P Marking character X-MC S 5.6/10 Q Marking character X-MC S 5.6/10 R Marking character X-MC S 5.6/10 S Marking character X-MC S 5.6/10 T Marking character X-MC S 5.6/10 U Marking character X-MC S 5.6/10 V Marking character X-MC S 5.6/10 W Marking character X-MC S 5.6/10 X Marking character X-MC S 5.6/10 Y Marking character X-MC S 5.6/10 Z Marking character s for Sharp Marking 10 mm high For markings with 10 characters X-MC S 5.6/10 0 Marking character X-MC S 5.6/ Marking character set X-MC S 5.6/10 1 Marking character X-MC S 5.6/10 2 Marking character X-MC S 5.6/10 3 Marking character X-MC S 5.6/10 4 Marking character X-MC S 5.6/10 5 Marking character X-MC S 5.6/10 6 Marking character X-MC S 5.6/10 7 Marking character X-MC S 5.6/10 8 Marking character X-MC S 5.6/10 9 Marking character DX_Gas_Inhalt_en.indd :44:30 Uhr
DIRECT FASTENING SYSTEMS. Hilti. Outperform. Outlast.
DIRECT FASTENING SYSTEMS. Hilti. Outperform. Outlast. Powder-Actuated Tools and Fasteners DX - Light Tools DX 460-F8 Page 140 DX 460 MX Page 141 Consumables X-U, X-C, X-FS, X-HS U, X-M, X-EM Page 142 Insulation
More informationDrywall Applications. Electrical and Mechanical Fastenings
DIRECT FASTENING Drywall Applications Battery-actuated fastening tool GX 3 Page 179 Collated nail X-C G3 MX Page 179 Collated nail X-P G3X Page 180 Collated nail X-PN G3 MX Page 180 Collated nail X-GN
More informationDIRECT FASTENING TECHNOLOGY MANUAL 2018
DIRECT FASTENING TECHNOLOGY MANUAL 2018 Hilti Corporation 9494 Schaan, Liechtenstein P +423-234 2965 www.facebook.com/hiltigroup www.hilti.group Contents Contents Hilti Direct Fastening System Part 1:
More informationX-EKB, X-ECH Electrical Cable Fasteners
X-EKB, X-ECH Electrical Cable Fasteners Product data Dimensions Single Fastener X-EKB 8/4-FR X-EKB 16 (FR) X-U 37 PH 1 2 4 o 8.15 16.8 10 21.5 34 136/104 16.8 10 25 229.7 37 49 o 11.8 X-ECH-S (FR) X-ECH-M
More informationX-ECT MX Electrical Cable Tie, X-EKS MX and X-EMTSC Conduit Clip Fastener
D X-ECTMX, X-EKSMX, X-ECT MX Electrical Cable Tie, X-EKS MX and Conduit Clip Fastener Product data Dimensions X-ECT MX X-EKS MX X-EKSC MX 18 X-GHP 20 X-GN 27 X-EGN 14 X-U 16/22/27 4 12.5 24.5 19 24.9 14
More informationHilti, Inc South 122 nd East Avenue Tulsa, OK
Attached are page(s) from the 2013 Hilti North American Product Technical Guide Volume 1 Direct Fastening. For complete details on this product, including data development, product specifications, general
More informationBX 3 system: fasteners for Interior Finishing, Mechanical and Electrical and Building Construction applications
Product data BX 3 system BX 3 system: fasteners for Interior Finishing, Mechanical and Electrical and Building Construction applications BX 3 battery-actuated direct fastening tools BX 3-ME BX 3-IF Fasteners
More informationDX460 Operating instructions 1 17
*37665* 37665 DX460 en Operating instructions 7 3 DX 460 4 5 6 7 9 8 0 5 3 4 5 0 6 MX MX 7 7 9 7 8 4 5 6. XMX7 X-460-F8 X-460-F8N5 X-460-F8N0 X-460-F8S X-460-F8SS X-460-F0 X-460-F80SS X-460-FIE X-460-FIE-L
More informationX-EKB, X-ECH Electrical Cable Fasteners
X-EKB, X-ECH Electrical Cable Fasteners Product data Dimensions Single Fastener X-EKB 8/4-FR X-EKB 16 (FR) X-U 37 PH 1 2 4 o8.15 16.8 10 21.5 34 136/104 16.8 10 25 229 o3.7 37 49 o11.8 X-ECH-S (FR) X-ECH-M
More informationPowder Actuated Fasteners - Drive Pins
122 Drive Pins Standard Pins Drive pins with a.300 diameter head are designed for permanently fastening a fixture to concrete, some types of masonry and A36 structural steel. Drive pins are manufactured
More informationGovernment Letters Job Reference 18 21
Hilti X-CR Nail Product Information 2 6 X-CR Nails DX 460 Tool DX 36 Tool Technical data 7-11 Government Letters 12 16 Country of Origin 17 Job Reference 18 21 Make your submission simple! To download
More informationHilti, Inc South 122 nd East Avenue Tulsa, OK
Attached are page(s) from the 2013 Hilti North American Product Technical Guide Volume 1 Direct Fastening. For complete details on this product, including data development, product specifications, general
More informationBX 3 system: fasteners for Mechanical & Electrical and Interior Finishing applications
BX 3 system: fasteners for Mechanical & Electrical and Interior Finishing applications Product data BX 3 battery-actuated fastening tool Nails (For fastening to concrete) X-P 17/20/24 B3 MX X-P 30/36 B3
More informationPOWDER FASTENING SYSTEMS
POWDER FASTENING SYSTEMS Over a half century of leadership in powder actuated tools and fasteners The first powder actuated tools (PATs) were used for repairing damaged ship hulls during World War I. This
More informationGCN150 Gas-Actuated Concrete Nailer
GCN0 Gas-Actuated Concrete Nailer The GCN0 gas-actuated concrete nailer is a portable fastening tool for attaching light-duty fixtures such as drywall track, furring strips, hat track and angle track to
More informationThe following excerpt are pages from the North American Product Technical Guide, Volume 1: Direct Fastening, Edition 15.
The following excerpt are pages from the North American Product Technical Guide, Volume 1: Direct Fastening, Edition 15. Please refer to the publication in its entirety for complete details on this product
More informationUsing Hilti powderactuated. to install suspended metal-framed gypsum board ceilings. The application. Selection of fasteners.
Using Hilti powderactuated fasteners to install suspended metal-framed gypsum board ceilings The application Selection of fasteners Technical data Procedures Fastening quality 0 Using powder-actuated fasteners
More information3. Health and safety Operator safety Fastening safety Functional safety 3.1 Operator safety Hilti DX/GX piston principle
3. Health and safety The safety of powder-actuated fastening systems can be examined in terms of three general safety characteristics: Operator safety refers to safeguarding the operator and bystanders.
More information+ + CFA Guidance Note: Powder Actuated Fixing Systems. Ensuring best fixings practice. Contents. 1.
Ensuring best fixings practice www.the-cfa.co.uk CFA Guidance Note: Powder Actuated Fixing Systems Note: The guidance given in this Guidance Note is provided in good faith but the CFA cannot accept any
More informationFASTENERS & ACCESSORIES
Staples General purpose staples to suit most popular staple guns. Particularly useful for stapling external angles and PVC mouldings to timber frames. PlasterX staples are designed to fit PLASTERX Arrow
More informationDrive Pins. Powder Actuated Systems. Powder Actuated Systems
Standard Drive Pins for Concrete, Masonry and Steel Drive Pins designed for fastening to standard strength concrete, masonry and steel up to a maximum of 8mm. Part No Drive Pin Length (thickness to steel)
More informationBX 3 system: fasteners for Mechanical & Electrical and Interior Finishing applications
BX 3 system BX 3 system: fasteners for Mechanical & Electrical and Interior Finishing applications Product data Nails X-C: o 6.5 X-P: o 6.8 (For fastening to concrete) X-P 17/20/24 B3 MX X-P 30/36 B3 P7
More informationPRODUCT CATALOG Meadowview Rd Junction City, OR fax
Made in the USA, since 1972 PRODUCT CATALOG Nichols Manufacturing 292 Meadowview Rd Junction City, OR 97448 541-485-60 sales@nicholsmanufacturing.com www.nicholsmanufacturing.com 122616 Nichols Manufacturing
More informationInterior Construction Catalog Edition. On the job. Every day. Hilti. Outperform. Outlast.
Interior Construction Catalog 2008 Edition On the job. Every day. We're with you every step of the way. At Hilti, our people and products are with you every step of the way. From design to construction,
More informationT3ss Gas Powered Tool
T3ss Gas Powered Tool Gas Technology Single Pin Gas Tool Fuel Injection Cross Over Technology /SUGGESTED SPECIFICATIONS Crossing Over from Powder to Gas THE PREMIER FASTENING SYSTEM FOR THE ELECTRICAL
More informationPlease direct powder-actuated and screw fastening technical inquiries to your local Hilti Field Engineer or Technical Support at
Section 3.1.2.8 Screws should only be used in non-corrosive applications, regardless of their coating, unless they are specifically listed as being suitable for outdoor or exposed conditions. More detailed
More informationDirektbefestigung. Technology. Manual Direct Fastening Technology Manual Edition May 2015 I
Hiti = registered trademark of Hiti Corp., Schaan W3479 0515 0-en 1 Printed in Germany 2015 Right of technica and programme changes reserved S. E. & O. Direct Fastening Technoogy Manua 2015 Handbuch Direct
More informationIndex Pipe Hangers and Straps
Index Pipe Hangers and Straps Fig. 1 Standard Clevis Hanger MSS-SP-69, Type 1 WW-H-171E, Type 1 Page 14 Fig. 1CI Clevis Hanger for A.W.W.A. Page 16 Fig. 81 Clevis Hanger WW-H-171E, Type 12 Page 70 Fig.
More informationDobyGrip Accessories. Wire with Loop. Wire with Closed M6 & *M8 Eye Bolt. Wire with Carabina
Wire with Loop Quick and easy fixing to purlins, beams etc by forming a choke knot. Reduces the installation time compared to conventional methods of suspension. All wires are supplied including the DobyGrip
More informationDrilling and Demolition
Drilling and Demolition Hilti. Outperform. Outlast. 18 Intoduction Application and tool selector Page 20-21 Cordless rotary hammers Cordless rotary hammer TE 2-A22 Page 22 Cordless rotary hammer TE 6-A36-AVR
More informationHAT 28 pull-out tester
HAT 28 pull-out tester It is essential that the operating instructions are read before the tool is operated for the first time. Always keep these operating instructions together with the tool. Ensure that
More informationonlinecomponents.com 150
150 900-147/900-148/900-149 Fish Tape 900-147 900-148 900-149 Made from flexible spring steel and black finish. Equipped with durable plastic container and slide handle. Easy to thread through the pipe
More informationAUXILIARY FRAMING AND ACCESSORIES
CUSTOM CABINETS & RACKS STRUT AND ACCESSO- RIES JUNCTION KITS ANGLE AND BRACE KITS SPLICE KITS BRACE KITS INSTALLATION KITS WALL ANGLE KITS RUBBER END CAPS SUPPORT INSTALLATION AND SUPPORT KITS STANCHION
More informationDRYWALL FASTENING SOLUTIONS
EN_BRO_DRYWALL-1-1-1 DRYWALL FASTENING SOLUTIONS Powers drywall projects Olympic village for London 2012, UK 1,6 million Trak-It nails Health centre Sittardsberg, Duisburg, Germany Deflection head, approved
More informationSimotec. 13.i
Products: Framo 80 13.0 Products: Framo 80 13.1 Products: Structural Elements 100/120 13.2 Products: Pipe Shoes 13.3 Framo 80: Beam Section and Screw 13.4 Framo 80: Cantilever Bracket and End Support STA
More informationFastener selection guide. Concrete fastener selection Selecting the right nail for concrete What determines nail performance
Concrete fastener selection Selecting the right nail for concrete What determines nail performance Hilti Direct Fastening systems are designed to achieve maximum performance in a wide range of applications.
More informationDrilling and Demolition. Leading-edge Technology. Outstanding Service.
Leading-edge Technology. Outstanding Service. Intoduction Application and tool selector Page 20-21 Cordless rotary hammers Cordless rotary hammer TE 2-A22 Page 22 Cordless rotary hammer TE 6-A36-AVR Page
More informationCONTENTS CABLE MANAGEMENT AND
CONTENTS CABLE MANAGEMENT SECTION 9 SECTION 9 CABLE MANAGEMENT AND ASSOCIATED PRODUCTS.................................91 PIN CLIPS H335B SERIES.......................................92 COPPER EARTH RODS.........................................92
More informationPrice list Connectors for floor reinforcement
Price list 2018 Connectors for floor reinforcement 01-01-2018 Shear Connector With Crampons with a 50x50x4 mm base plate - screws Ø 8 mm Diameter x length CTLB 020 12 X 020 0,17 2,31 CTLB 030 12 X 030
More informationReady To Go SimpleSpec tm. Installation Manual. For more information, please visit 3-form.com or call
Contents Overview ( 1) 3/8" Varia Panel = Cable Tensioner with Cover Plate KIT Stainless Steel: 3-15-1636-K Black Oxide: 3-15-2005-K Cable Tensioner with Cover Plate SS: 3-15-1636 BO: 3-15-2005 + M8 Thread
More informationHolemaking. Contents MADE FOR THE TRADE!
Year after year, Greenlee delivers holemaking products that are second-to-none in the industry. And today, we offer the most complete line of holemaking solutions for getting through steel, stainless steel,
More informationHolemaking Products & Accessories
Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy and consistency to get
More informationFASTENERS C O M P AT I B L E W I T H F E R O T I E S Y S T E M S. Which FERO Tie Systems Require Fasteners?
FASTENERS C O M P AT I B L E W I T H F E R O T I E S Y S T E M S Which FERO Tie Systems Require Fasteners? Structural Actions: Fastener,, or Both? With the exception of FERO tie systems that are directly
More informationNON-PENETRATING ROOFTOP HANGERS AND SUPPORTS
SECTION 15062 NON-PENETRATING ROOFTOP HANGERS AND SUPPORTS For best results, display hidden notes to specifier. PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe supports. B. Conduit supports. C. Duct supports,
More informationX-HS Threaded Hanger and X-CC Loop Hanger Systems
5, Threaded Hanger and oop Hanger Systems Product data Dimensions DKH À U Á U Â M5 7.5 25.5 10 o15 5 41 36 o 15 HITI 24 7 9.5 o 4 S dg 2 D o 4 12 1.5 8.5 4.5 o 4 8.5 DKH 48 P8S15 o8 o4 o15 X-U _ P8 Ø 8
More informationPrecision Engineering & Reliability WIRE ROPE SUSPENSION SYSTEM
Precision Engineering & Reliability WIRE ROPE SUSPENSION SYSTEM DobyGrip Wire with Loop Quick and easy fixing to purlins, beams etc by forming a choke knot. Reduces the installation time compared to conventional
More informationPRODUCT INFORMATION 0.145/0.130" 100 5,
PROUCT INFORMATION Fasteners.300" Head rive Pins rive pins with a.300" head are designed for permanently fastening a fixture to concrete, some types of concrete block, and A36 or A572 structural steel.
More informationInstallation and Assembly: Ceiling mount for LCD screens up to 29"
Installation and Assembly: Ceiling mount for LC screens up to 29" Models: LCC 18, LCC 18-S, LCC 36, LCC 36-S Patent Pending Features: Comes in two adjustable height ranges (in 1" increments): 18"-30" and
More informationHolemaking Products & Accessories
Holemaking Products & Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy
More informationComponents made of special materials. Floor Elements for Profile St Profile KH. Fastening Elements for Profile KH
Profile Fastening Elements for Profile Floor Elements for Profile Profile KH Fastening Elements for Profile KH Components made of special materials Products in this section Profile 8 x eel profile that
More informationMaterial Specifications Technical Data
3.4.3.1 Product 3.4.3.2 Material Speciications 3.4.3.3 Technical Data 3.4.3.4 Installation Instructions 3.4.3.5 Ordering Information 3.4.3.1 Product Hilti provides a wide range of solutions for the attachment
More informationPerfect sawing. The complete FEIN program for sawing: Jigsaws P Hacksaws P With the FEIN sabre saw through thick and thin with ease.
FEIN Sawing 222 Perfect sawing. FEIN Jigsaws are characterised by their high performance under tough operating conditions. They saw vertically and horizontally in metal, wood and plastics (including fibreglass).
More informationMODEL GRTRN45 ROOFING NAILER
MODEL GRTRN45 ROOFING NAILER GRTRN45 COIL ROOFING NAILER 7/8 to 1-3/4 (22 mm - 45 mm) 15 COIL ROOFING NAILS 5.04 lbs. (2.29 kg) 10.5 (26.7 cm) 10.9 (27.7 cm) 3.2 (8.1 cm) 1 13 2 3 4 12 5 6 7 11 10
More informationGAGING AND INSPECTION
Fixture Plates...75 Fixturing Towers...76 CMM Fixturing Kits... 77-78 Clamping Components... 79-80 Standoffs and Locators... 81-82 Magnetic Components... 83-84 Height Adjustment...84 Positioners...85 Clamp
More informationDX 76-PTR. Operating instructions Mode d emploi Manual de instrucciones Manual de instruções. Printed: Doc-Nr: PUB / / 000 / 02
DX 76-PTR Operating instructions Mode d emploi Manual de instrucciones Manual de instruções en fr es pt Printed: 30.05.2016 Doc-Nr: PUB / 5126071 / 000 / 02 1 Printed: 30.05.2016 Doc-Nr: PUB / 5126071
More informationHOUSE PARTS PACKED IN HOUSE BOX PARTS IN PLASTIC BAG (HARDWARE) PARTS IN SMALL PLASTIC BAG (FLOOR CLIPS) PARTS PACKED IN BUNDLE
Check parts against this list before starting assembly. Refer to illustrations on pages 6 and 7 to view house parts. If any shortages are found, refer to Packing Slip for claim instructions. Item 3 5 6
More informationFastener Type Chart. Fastener Categories. Sheet Metal Screws Fully threaded screws with a point for use in sheet metal. Abbreviated SMS.
Fastener Categories Wood Screws Machine Screws Thread Cutting Machine Screws Screws with a smooth shank and tapered point for use in wood. Abbreviated WS. Screws with threads for use with a nut or tapped
More informationSTANDARD "T" HANDLE CLAMPS
STANDARD "T" HANDLE CLAMPS Standard "T" Handles 401 1" 405 2" 410 3" 420 6" 430 9" 440 12" Multi-purpose clamps combine the best features of ordinary "C" and parallel clamps. Free-floating jaws adjust
More informationGLOSSARY OF TERMS SECTION 8
GLOSSARY OF TERMS SECTION 8 Anchor Bolt Angle Base Plate Bay Blocking CCB Centerline Chord Cladding Clip Closure Strip An A-307 steel bolt embedded in the concrete footing to anchor the base plate of the
More informationFULLER CHISELS CUTTING TOOLS
CUTTING TOOLS Back FULLER CHISELS From the standard Wood Chisel to our top-of-the-line Woodworker s Chisel, FULLER offers the perfect combination of variety and quality in its chisel line-up. Finely honed
More informationConcealed Thru-Roof Assemblies
Concealed Thru-Roof Assemblies IPC s concealed thru-roof assembly is ideal for new constructions or applications where installation will be concealed. The 240 assembly includes everything necessary for
More informationSECTION MASONRY ANCHORAGE AND REINFORCEMENT. Display hidden notes to specifier. (Don't know how? Click Here)
PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 04080 MASONRY ANCHORAGE AND REINFORCEMENT Display hidden notes to specifier. (Don't know how? Click Here) A. Post installed masonry anchors. B. Miscellaneous
More informationmk Profile Technology
mk Profile Technology One Construction Kit, Many Options Base Technology Profile Technology Conveyor Technology Factory Equipment Linear Motion better products, better solutions One basic technology, four
More informationDiagonal Cutters for plastics DIN ISO
Diagonal Cutters for plastics DIN ISO 5746 72 > cutting face flush ground > for nearly flush cutting of moulded plastic components from sprues > cuts soft materials such as lead in a flush cut > with opening
More informationSECTION 7 CHANNEL & SUPPORT SYSTEMS
SECTION 7 CHANNEL & SUPPORT SYSTEMS Unitrunk Intelok Channel is a strong, easy to erect support system, ideal for supporting cable trays, cable ladders, pipes and ducting and is adaptable for use in many
More informationHEAVY DUTY WEIGH FEET KIT. Installation Instructions
HEAVY DUTY WEIGH FEET KIT Installation Instructions PUBLISHED BY Gallagher Group Limited Kahikatea Drive, Private Bag 3026 Hamilton, New Zealand www.gallagher.co Copyright Gallagher Group Limited 2010.
More informationFASTENERS BUILDING DEPARTMENT
FASTENERS BUILDING DEPARTMENT 952-446-1660 WWW.CITYOFMINNETRISTA.COM This handout is intended only as a guide and is based in part on the 2015 Minnesota Residential Code, Minnetrista City ordinances, and
More informationPliers. Pliers PLIERS
Pliers Pliers PILERS Long Nose Pliers With Side Cutter Comfortable two-component handles combine durability with a secure non-slip grip. High-leverage joint placement increases leverage to reduce the cutting
More informationTYPICAL STANDOFF GLASS RAIL ELEVATION TYPICAL SECTION RS0B20 WITH RECTANGULAR BACK PLATE TYPICAL STAIRS
Revisions By: CRL SRS STANDOFF RAILING SYSTEM CRL GLASS RAIL S RS0B20 w/ RECTANGULAR BACK PLATE CRL'S GLASS RAIL S CAN BE USED FOR MOUNTING GLASS PANELS UP TO 3/4" (19 MM) IN THICKNESS. THE 4" X 8" (102
More informationHang-TITE Rod Hanger Screws
Description The Hang-TITE Rod Hanger Screw is a one-piece, internally threaded anchor designed for suspending threaded rod for applications like cable-tray, pipe hanging, fire protection, and electrical
More informationPOWDER-ACTUATED FASTENERS IN COLD-FORMED STEEL CONSTRUCTION
TECHNICAL NOTE On Cold-Formed Steel Construction $5.00 Light Gauge Steel Engineers Association Washington, D.C. Toll-Free: 1 (866) 465-4732 www.lgsea.com POWDER-ACTUATED FASTENERS IN COLD-FORMED STEEL
More informationACCESSORIES ACCESSORIES ACCESSORIES FASTENERS & TOOLS NAME PLATES PLASTIC ANGLES & COVERS BOARDS & SHEETS ADJUSTER METAL JOINTS PIPES PLASTIC JOINTS
ADJUSTERS AM-3030PS P/ADJUSTER M10 SMALL AM-3050PL P/ADJUSTER M10 LARGE AR-3212SS 32g/ea ADJUSTER AR-5012LS 31g/ea ADJUSTER 84g/ea 47 1 84g/ea CN-3010MS STEEL CAP NUT M10 CN-3010MP PLASTIC CAP NUT M10
More informationGloEx Product List Assessment-Nail Selection
Item 01 Common Nail Bright Finish/HDG Flat Smooth/Ring FOR GENERAL CONSTRUCTION, CARPENTRY AND FRAMING. MADE TO CONFORM TO ASTM F1667. : Electrogalvanized option available Package s 3D 1-1/4" 14 13/64"
More informationAnchor type Base material Approvals Application. Lightweight concrete Aerated concrete. Uncracked concrete. Solid brick masonry
Anchor selector Anchor type Base Approvals Application Mechanical anchor systems Heavy duty anchors HDA-T/ -TR/TF/-P/-PR/-PF undercut anchor Anchor fastening for high loads e.g. in steel construction and
More informationBITS, NUTSETTERS, ADAPTERS
BITS, NUTSETTERS, ADAPTERS Square Recess Power Driver Bits... Colour-Coded Square Recess Power Driver Bits... Phillips Power Driver Bits... 6 Colour-Coded Phillips Power Driver Bits... 7 Six Lobe Power
More informationTool Systems for Truss Construction
Tool Systems for Truss Construction Built to Hold Up. Over Time. And Under Pressure. Built to Hold Up. There s a lot riding on a truss, but none is more important than your reputation. How precisely it
More informationKS SERIES - VERTICAL INSTALLATION
CS-DS-01-KSV CS DISCLAIMER CS-PJ-01-KSV KS42SL EXPANDED PANEL JOINT CS-PJ-02-KSV KS42SL ENGAGED PANEL JOINT CS-PJ-03-KSV KS45SL EXPANDED PANEL JOINT CS-PJ-04-KSV KS45 FLAT ENGAGED PANEL JOINT CS-PJ-05-KSV
More information7141 & NATIONAL POLE VAULT STANDARDS SPECIFICATIONS
SPECIFICATIONS Specifications: This standard has a clamping system and a handle added for ease of operation. The clamping system is above the base pad protectors when in the lowest position and the tightening
More informationeb^sv=qfj_bo UNIVERSITY OF WISCONSIN - STOUT COLLEGE OF SCIENCE TECHNOLOGY ENGINEERING & MATHEMATICS Architectural Technology AEC 233
eb^sv=qfj_bo UNIVERSITY OF WISCONSIN - STOUT COLLEGE OF SCIENCE TECHNOLOGY ENGINEERING & MATHEMATICS Architectural Technology AEC 233 Dr. Jason E. Charalambides fkqolar`qflk Heavy timber construction consists
More informationAir-supply elements. 5-2 MGE 13.1 Air-supply elements. 45x90. 45x90 (p. 2 41) Rexroth strut profiles can be used as compressed-air
5-2 MGE 13.1 Air-supply elements (p. 2 41) Air-supply elements Rexroth strut profiles can be used as compressed-air 19584 L L 2N L 3NVS (p. 2 40) 009732 L 7,9 cm 2 leads and reservoirs. The hollow chambers
More informationDelrin Cone T-Handle Spring Stop w/pad...9 Screw Jack Large Toggle Clamp w/pad...9 Adjustable Ball Positioner...14
Distributed by Rapp Industrial Sales INDEX Aluminum Fixture Plates...4 Pin Rest...11 Acrylic Plates...4 Thread Adapter...11 Fixturing Towers...5 Delrin Cone...11 CMM Fixturing Kits...6-7 Magnetic Rest
More informationBracket guide. LK Pipe Pole. LK Radiator fixture Uni
Bracket guide LK Radiator fixture Uni LK Radiator fixture Uni c/c 40 (Article no. 481 43 92) LK Radiator fixture Uni c/c 50 (Article no. 481 44 03) LK Pipe Pole (Article no. 481 43 91, 481 43 90) Used
More informationAdjustable Feet Castors Accessories for Floor Elements
Adjustable Feet Castors Accessories for Floor Elements Products in this section Levelling Knuckle Feet Threaded spindles for infinite height adjustment Metal or plastic foot plate Knuckle Feet X Compatible
More informationCIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD METAL SCREWS. 6 x 3/4 P/N x 1 METAL SCREW P/N x 3/4 METAL SCREW
A21-1 1160 CIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD S For light duty applications in solid materials Color coded diameters for easy identifi cation Acid resistant NYLON FLANGED:
More informationNOBE ApS ~ Bjødstrupvej 10 ~ DK-8410 Rønde ~ ~
2017 NOBE ApS offers under the brand RGN a wide range of fastening tools. Our aim is to offer good quality to the best value for your money. We cooperate closely with experienced dealers to ensure that
More informationWALL TO FABRICATED FLOOR
WALL TO FABRICATED FLOOR PERIMETER WALL IS HELD IN PLACE BY WOODEN STRIP SCREED OPTIONAL NSF COVED FLOOR IS SHOWN PARTITION WALL IS HELD IN PLACE BY WOODEN STRIP SCREED OPTIONAL NSF COVED FLOOR IS SHOWN
More informationHex Head Bolt Set N - Includes lock nut. Used to connect male and female T connectors. Galvanized. 3/4" x 3-1/2". Standard Grade (f) Part #24279
a Standard Grade (3/16 ) and Commercial Grade(1/4 ) Tie Down Is designed for use with 1-1/2" thick lumber (minimum width 6"). All hardware is mounted with 3/8" carriage bolts. All male and female dock
More informationDesign Guide Pryda Connectors for Steel Framing
Pryda Connectors for Steel Framing Copyright: (c) Pryda Australia A Division of ITW Australia November 2012 November 2012 Design Guide Pryda Connectors for Steel Framing INDEX General Notes General information
More informationProducts for fixing to Steelwork and Decking
Products 8.0 Beam Clamp - Single Support 8.1 Universal Joint for any variable Angle Adjustment 8.2 Beam Clamp TCS for Header Rails 8.3 Beam Clip for Cross Support/ Dimensioning of Bolts 8.4 Beam Clip for
More informationSupport Fastening. Support Fastening
A variety of fastening systems may be used to connect steel deck to the supporting members. The type of fastening system used depends on the required diaphragm shear capacity, uplift capacity and the thickness
More informationPENSTOCK VALVES. Performance through Excellence
VALVES & MANUFACTURING (1988) LTD. PENSTOCK VALVES Performance through Excellence SLIDEGATES WEIR GATES STOP LOGS SLIDEGATES PRECISION FACE SEALING VALVES WEIR GATES STOP LOGS SLIDEGATES Actuation Installation
More informationCreate cable assemblies to fit your style
2015 Feeney (11/15) Quick-Connect Brochure #2015-975B Create cable assemblies to fit your style Quick-Connect Solutions Guide The fast and easy way to create your own CableRail assemblies! Our CableRail
More informationEuropean Technical Assessment ETA-04/0101 English translation prepared by DIBt. Page 2 of 12 1 March 2018
European Technical Assessment ETA-04/0101 Page 2 of 12 1 March 2018 The European Technical Assessment is issued by the Technical Assessment Body in its official language. Translations of this European
More informationPage 1. ultimatesupport.com
Stop Dreaming. Start Doing. Page 1 Main Menu click on category links Studio Desk 3 Keyboard Stands 4 Benches 4 Amplifier Stands 5 Guitar Stands ( Accessories) 5-6 Pedalboard 6 Guitar Hangers 6 Speaker
More informationAir-supply elements. Air-supply elements MGE Flanged plate (p. 5-3) M12-1/4" (p. 5-4) Longitudinal end connector (p.
Air-supply elements MGE 13.0 5-1 Air-supply elements 1 2 3 4 5 6 7 8 Flanged plate (p. 5-3) Connection piece (p. 5-4) Connection screw fitting -1/4" (p. 5-4) Longitudinal end connector (p. 5-5) 9 11 12
More informationFloor Stops - Dome. FS13 Dome Stop. FS17 Dome Stop. R14 Riser. Features:
Floor Stops - Dome FS13 Dome Stop Standard FS13 for use where no threshold is used. Heavy-Duty Cast Dome Stops constructed of brass. Unique riser design of R14 (below) allows easy conversion to threshold
More informationFast, Flexible, Functional
FA ZTEK T H E S H A P E O F T H I N G S T O C O M E T-Slotted Aluminum Solutions Fast, Flexible, Functional FAST Prompt, timely shipments Shortest possible turnaround Large in-stock inventory of standard
More informationSection Member. H (in.) WT. lb./ft. Pull Out Strength Slip Resistance Torque Size / Thread All Series
Design Data Channel TABLE 1 Elements of Sections Properties for Design Single Channels Nominal Thickness (inches) ga = 0.105 ga = 0.075 16 ga = 0.060 Double Channels LEGEND I Moment of inertia S Section
More informationPROMPT TRADING CO. Ph. No.: FOR RESCUE
FIRED UP FOR RESCUE 78 When it comes to rescuing life and limb, every movement must be just right. This day. Any obstacles in their way, such as a locked access point, present an immediate danger to those
More informationTO O L K IT. Public Bike Repair
TO O L K IT Public Bike Repair The Dero Tool Kit includes all the necessary tools to perform most routine maintenance and adjustments on most bikes. All the tools are securely fastened with stainless steel
More information