BX 3 system: fasteners for Mechanical & Electrical and Interior Finishing applications

Transcription

1 BX 3 system BX 3 system: fasteners for Mechanical & Electrical and Interior Finishing applications Product data Nails X-C: o 6.5 X-P: o 6.8 (For fastening to concrete) X-P 17/20/24 B3 MX X-P 30/36 B3 P7 X-C 20/24 B3 MX 1.8 L Electrical elements to be used with nails X-EKS MX X-EKSC MX o X-FB MX d W D X-ECH MX X-EKB MX X-DFB MX 3 X-ET MX H 18 X-UCT MX 18 X-ECT MX o3 Ls (For fastening to steel) X-S B3 o 6.8 BX 3 cordless electric nailer X-ECC MX X-EHS MX 8 X-TT X-ECT 40 MX General information w x l x h = 16.5 x 16.5 x 12 mm Material specifications X-P B3, X-S B3 nails X-C B3 nails Carbon steel, HRC 57.5, 2-8 μm zinc coating Carbon steel, HRC 56.5, 5-13 μm zinc coating X-ECT, X-EKS,X-EKSC, X-EKB, X-ECH, X-ET Polyamide (halogen and silicon-free), light grey RAL 7035 X-ECT-FR MX, X-EKB-FR MX PBT (silicon free, flame retardant), stone grey RAL 7030 X-UCT HDPE (halogen and silicon free), light grey RAL 7035 X-TT Polyester (PES) X-FB, X-DFB Galvanized steel sheet, fu = N/mm2, μm zinc coating X-ECC, X-EHS Galvanized steel sheet, fu = N/mm2, μm zinc coating Approvals ICC-ES Report 04 /

2 BX 3 system Product data 1.5 [0.059"] 7 [0.276"] 24 [0.944"] 20 [0.787"] Ø6 [0.236"] [0.551"] [0.118"] Ø6 [0.236"] W6 X-W6-12- B3 P7 Ø6 [0.236"] Ø3 [0.118"] W6 X-W B3 P7 1.5 [0.059"] 12 [0.472"] Ø3 [0.118"] Ø6 [0.236"] Ø3 [0.118"] M6 1.5 [0.059"] 7 [0.276"] (For fastening to steel) X-M6-7- B3 P7 M6 Threaded studs (For fastening to concrete) X-M B3 P7 Ø3 BX 3 cordless electric nailer 1.5 [0.059"] 12 [0.472"] [0.551"] General information Material specifications Carbon steel shank HRC 57.5 Zinc coating 2 8 μm Applications Examples With nails and elements Flexible or rigid cable conduits with cable ties Fastening cables With threaded studs With nails Junction boxes, switch boxes, etc. Drywall tracks to concrete and steel 2 Cable conduits or light-duty pipes 04 / 2016

3 Load data Recommended loads (nails and threaded studs only) Nrec V rec Design conditions Minimum 5 fastenings per fastened unit All visible failures must be replaced X-P B3 and X-C B3 nails (Base material: concrete / sand-lime masonry) N rec [kn] V rec [kn] h ET [mm] X-S B3 nails (Base material: steel) N rec [kn] V rec [kn] Recommended loads and tightening torque Threaded stud N rec [kn] V rec [kn] T rec [Nm] Base material X-M B3 P Concrete, sand-lime X-W B3 P7 masonry X-M6-7- B3 P Steel X-W6-12- B3 P7 Recommended loads and capacities (electrical elements used with nails) Element X-ECT (FR) MX X-UCT MX X-EKS MX X-EKSC MX X-FB MX / X-DFB MX X-ECC MX X-EHS MX X-ET Max. service load, F max (concrete, sand-lime masonry and steel) 40 N 40 N 11 N 20 N 20 N 50 N 80 N Cable trunking 100 N Element (recommended for cables Ø 8 mm and Ø 10 mm) Max. fastener capacities (concrete, sand-lime masonry and steel) (at spacing of cm to limit cable slack) NYM 3x1.5 mm 2 (Ø 8 mm) NYM 5x1.5 mm 2 (Ø 10 mm) X-EKB (FR) 4 MX 4 3 X EKB (FR) 8 MX 8 5 X EKB (FR) 16 MX X-ECH-15 MX and X-ECH-B X-ECH-30 MX and X-ECH-B /

4 Application requirements Thickness of base material Concrete (for nails Steel hmin d nom and threaded studs) h min = 60mm d nom = 3.0mm tii t II 4.0mm (for nails) t II 6.0mm (for threaded studs) Thickness of fastened material Wooden track: Metal track: t I 27mm t I 2mm Spacing and edge distances (mm) Spacing along track All track ends (cut-outs for doors), secure with 2 nails Fastener spacing max. 30 cm for proprietary light non-load-bearing partition walls with fire classification Distance to edge of concrete / sand-lime masonry Fastener spacing on wood: Distance to edge of fastened material (steel base material) 4.5 d nom = mm 4 04 / 2016

5 Application limits X-S B3 MX Steel thickness, tii [mm] S235Jxx S275Jxx S355Jxx Steel strength, R m [N/mm 2 ] X-M6-7- B3 P7, X-W6-12- B3 P7 Steel thickness, tii [mm] S235Jxx 10 8 S275Jxx S355Jxx Base material strength, R m [N/mm 2 ] Corrosion information The intended use only comprises fastenings which are not directly exposed to external weather conditions or moist atmospheres, i.e. only intended for dry indoor areas. Fastener selection and system recommendation Fastener program Nails Nail Item no. Shank length Shank diameter Base material (mm) (mm) X-S B3 MX Steel Concrete X-C 24 B3 MX Concrete X-P 17 B3 MX Concrete Concrete X-P 24 B3 MX Concrete X-P 30 B3 P Concrete X-P 36 B3 P Concrete Threaded studs Threaded studs Item no. Thread Thread Shank Shank Base material size length length diameter (mm) (mm) (mm) X-M6-7- B3 P M6 7 3 Steel X-M B3 P M Concrete X-W6-12- B3 P W Steel X-W B3 P W Concrete 04 /

6 Fastener program Cable mount Maximum number of cables Element Item no. NYM 3x1.5 mm 2 NYM 5x1.5 mm 2 (Ø 8 mm) (Ø 10 mm) X-ECT MX X-ECT 40 MX X-UCT X-EKB 4 MX X-EKB 8 MX X-EKB 16 MX X-ECH-15 MX X-ECH-30 MX Pipe supports Element Item no. Pipe diameter X-ECT MX X-ECT 40 MX mm X-UCT mm X-EKS MX See X-EKS MX and X-EKSC MX X-EKSC MX product pages mm X-FB MX See X-FB MX and X-DFB MX X-DFB MX product pages 5 40 mm 6 04 / 2016

7 Fastener selection Nail Selector for BX 3 X-C 24 B3 MX X-P 17 B3 MX X-S B3 MX X-P 36 B3 P7 X-P 30 B3 P X-C 24 B3 MX X-S B3 MX X-P 17 B3 MX X-P 17 B3 MX X-P 17 B3 MX X-S B3 MX X-C 24 B3 MX X-S B3 MX X-W B3 P7 X-M B3 P7 X-W6-12- B3 P7 X-M6-7- B3 P7 Propellant-free Fastener guide Item no. Use X-FG B3-ME With nails + elements or only studs X-FG B3-IF With nails or studs only 04 /

8 Fastening quality assurance Fastening inspection Nails and studs in concrete / sand-lime masonry Nails and studs in steel h NVS t I hnvs h NVS t I X-C_BX, X-P_BX3: h NVS = 2 5 mm X-M B3 P7 X-W B3 P7 h NVS 7 mm 12 mm X-S_BX: h NVS = 2 9 mm hcs t I X-C_BX, X-P_BX: h CS = 2 3 mm X-M6-7- B3 P7 X-W6-12- B3 P7 h NVS 7 mm 12 mm Element Concrete h NHS (mm) Steel X-EKB 4/8 MX X-EKB 16 MX X-ECT MX X-UCT MX X-ECH MX X-EKS MX X-EKSC MX X-FB MX X-DFB MX X-ECC MX X-EHS MX X-ET MX* *) With X-ET MX, the hnvs is measured against the cable trunk. Examples 8 04 / 2016