CONTENTS. Hammerscrews White Zinc Plated 2 Hammerscrews Stainless Steel A Nylon Frame Anchors Yellow Zinc Plated 3 Nylon Plug 3
|
|
- Nora Short
- 5 years ago
- Views:
Transcription
1 C CONTENTS CONTENTS PAGE 1 HAMMERSCREWS Haerscrews White Zinc Plated 2 Haerscrews Stainless A NYLON FRAME ANCHOR Nylon Frame s Yellow Zinc Plated 3 Nylon Plug 3 3 WINDOW FRAME ANCHOR Window Frame 4 4 METAL HAMMER IN Haer In All 5 Haer In Zamac 5 5 PLASTERBOARD ANCHORS Plasterboard Metal 6 Plasterboard Nylon 6 6 RUBBER NUT (EPDM) Rubber Nut (EPDM) 7 7 HOLLOW WALL ANCHOR Hollow Wall s TOGGLE ANCHORS Toggle 9 Toggle Nylon 9 C Fasteners Limited Construction Fastening Systems - World of Fixings
2 FIXING SELECTION GUIDE S SELECTOR Key Base Material Suitability Type Full Suitability Limited Suitability No-fines Dense Block Brickwork (Solid) Brickwork (Perforated) Stone Rock Light Aggregate Block (Solid) Light Aggregate Block (Hollow) Aerated Block Hollow Clay Pots Plasterboard Torque Controlled Haerset Page Type 1 2 Haerscrews 2 3 Nylon Frame 3 4 Window Frame 4 5 Metal Haer-in 5 6 Plasterboard s 6 7 Rubber Nut (EPDM) 7 Hollow Wall s 9 Toggle s Telephone: Fax: sales@trutekfasteners.co.uk Website: 1
3 1 The Trutek Haerscrew is one of the fastest and inexpensive methods of fixing for static loads that requires very little screwdriver work. The nylon sleeve is manufactured from durable polymide 6 which gives longer fixing life. This fixing can be used in concrete, solid bricks, lightweight concrete blocks, hollow blocks, rock and stonework. Conduit, drywall track Battens, brackets Skirting boards, signs Bricks ties, frame cramps Switch boxes, trunking Pre-assembled Zinc plated Stainless steel for full corrosion protection Nylon sleeve gives long life Countersunk head allows flush finish One operation through fixing Quick installation Haerscrew White Zinc Plated Plug Min Min Embedment Centre Spacing Edge Distance In 30N/ 2 Tension/Shear Zinc Plated / 0.20 THS / 0.20 THS / 0.20 THS / 0.2 THS / 0.2 THS / 0.2 THS / 0.2 THS / 0.2 THS / 0.2 THS / 0.40 THS / 0.40 THS / 0.40 THS / 0.40 THS / 0.40 THS0140 Tensile and shear loads for all above are for 30 N/2 concrete at minimum embedment Haerscrew Stainless A Plug Min Min Embedment Centre Spacing Edge Distance In 30N/ 2 Tension/Shear Stainless A / 0.20 THS05030SS / 0.20 THS05040SS / 0.2 THS06040SS / 0.2 THS06060SS / 0.40 THS000SS / 0.40 THS0100SS 1. Drill hole to correct diameter and recoended depth. 2. Remove debris and clean hole thoroughly. 3. Push haerscrew through fixture into base material until collar is flush with surface. 4. The anchor will expand by haering the screw until it is flush with the plug head. 2 Fasteners Limited Construction Fastening Systems - World of Fixings
4 2 The Trutek Nylon Frame is for fixing timber or metal door frames to concrete, stone, brick or blockwork. It has the benefit of being a through fixing which allows the material to be fixed in the correct place prior to being secured. The nylon sleeve is manufactured from durable polymide 6 which gives a longer fixing life. The pozi head screw provided is suitible for use with screw caps. Door & window frames Wall plates Battens Sole plates Through fixing Zinc plated High grade screw gives greater shear performance Nylon sleeve gives long life Through fixing Countersunk head allows flush finish Anti rotation lugs to prevent spinning No marking out is required Nylon Frame Yellow Zinc Plated 10 Plug Min Min Embedment Centre Spacing Edge Distance In 30N/ 2 Tension/Shear Zinc Plated / 2.2 TNFA / 2.2 TNFA / 2.2 TNFA / 2.2 TNFA / 3.0 TNFA / 3.0 TNFA / 3.0 TNFA / 3.0 TNFA / 3.0 TNFA10160 Tensile and shear loads for all above are for 30 N/2 concrete at minimum embedment Nylon Plug Plug Wood Wood Gauge Min Rec Tensile KN Product Code The Trutek Nylon Plug is made from Polymide 6. This increases the life of the product for long term reliability.this plug can be used with both brass and Stainless woodscrews where a corrosion fix is required TNP TNP TNP TNP TNP TNP TNP14 1. Place frame in position and drill appropriate diameter hole through frame and into base material. 2. Remove debris and clean hole thoroughly. 3. Insert plug through into hole and lightly tap until flush with the surface. 4. Insert the screw and tighten until secure. Telephone: Fax: sales@trutekfasteners.co.uk Website: 3
5 3 The Trutek Window Frame is specially designed for fixing of upvc and aluminium frames. The retaining lugs at the top of the sleeve allow the frame to be located in the desired position without distortion. This fixing can be used to fix into concrete, stone, solid brickwork, perforated brickwork, rock and concrete block. upvc door & window frames Aluminium frames Anti rotation fins Zinc plated screw for corrosion resistance Retaining collar Captive expander cone Comes complete with cover caps Through fixing Countersunk head allows flush finish Anti rotation lugs to prevent spinning Window Frame Yellow Zinc Plated (c/w cover cap) Plug Min Min Embedment Centre Spacing Edge Distance In 30N/ 2 Tension/Shear Zinc Plated / 1.0 TWFA / 1.0 TWFA / 1.0 TWFA / 1.5 TWFA / 1.5 TWFA / 1.5 TWFA / 1.5 TWFA / 1.5 TWFA10165 Tensile and shear loads for all above are for 30 N/2 concrete at minimum embedment Countersunk Head Retaining Collar Frame Retaining Lugs Anti Rotation Fins Captive Expander Cone Zinc Plated 1. Drill hole to correct diameter and recoended depth. 2. Remove debris and clean hole thoroughly. 3. Tap anchor home until sleeve is flush with the frame. 4. Tighten with a pozidrive No. 2 screwdriver.then clip on cover cap. 4 Fasteners Limited Construction Fastening Systems - World of Fixings
6 4 The Trutek All Haer-In is a nail expanding anchor suitable for materials such as concrete, solid brickwork and solid stonework. It is a vandal proof anchor ideal for fixing signs and notices. This all steel version gives it a high fire resistance. It performs better than the nylon haerscrew in the fixing of plasterboard ceiling panels to a concrete soffit where a better load and fire resistance is beneficial. Signs, bill boards Switch boxes Trunking Brick ties All metal anchor for higher fire resistance Hardened steel expander nail Large diameter head Pre-assembled for quick installation Through fixing Vandal proof for security applications Metal Haer-in All White Zinc Plated 6 Min Flange Head In 30N/ 2 Tension In 30N/ 2 Shear Zinc Plated TSH TSH06050 The Trutek All Haer-In is a nail expanding anchor suitable for materials such as concrete, solid brickwork and solid stonework. It is a vandal proof anchor ideal for fixing signs and notices with a large diameter head that gives greater pull over strength. It has a zinc alloy body for corrosion protection. Signs, bill boards Switch boxes Trunking Brick ties Zinc alloy body for corrosion protection Hardened steel expander nail Pre-assembled for quick installation Through fixing Vandal proof for security applications Metal Haer-in Zamac White Zinc Plated Min Flange Head In 30N/ 2 Tension In 30N/ 2 Shear Zinc Plated TZH TSH TSH Drill hole to correct diameter and recoended depth. 2. Remove debris and clean hole thoroughly. 3. Insert haer-in anchor until it is flush with the fixture. 4. Drive the expander nail fully home using a haer. Telephone: Fax: sales@trutekfasteners.co.uk Website: 5
7 5 The Trutek TMPA anchor is a fast and cost effective fixing for lightweight items into plasterboard. It can be used in single or double thickness plasterboard. Rapid and easy installation can be achieved by use of a power or standard pozi drive screwdriver. Electrical boxes Sanitary ware Cable trunking Shelving Self drilling Flange prevents push through Supplied c/w screw Fast and easy installation No min/max plasterboard thickness Cost effective fixing Metal Plasterboard Thread Rec Tensile KN Rec Shear KN Zinc Alloy TMPA Product supplied c/w screws The Trutek TNPA anchor is a fast and cost effective fixing for lightweight items into plasterboard. It can be used in single or double thickness plasterboard. Rapid and easy installation can be achieved by use of a power or standard pozi drive screwdriver. Electrical boxes Sanitary ware Cable trunking Shelving Nylon Plasterboard Self drilling Flange prevents push through Supplied c/w screw Fast and easy installation No min/max plasterboard thickness Cost effective fixing Nylon construction reduces risk when fixing near electrical cables Thread Rec Tensile KN Rec Shear KN Nylon TNPA Product supplied c/w screws 1. Position the fixture and mark out holes. Using a pozi drive screwdriver bit, push the fixing firmly into the plasterboard until thread engages. 2. Maintaining firm pressure, screw the fixing into the plasterboard until flush. 3. Place fixture in position, insert screw and tighten until secure. 6 Fasteners Limited Construction Fastening Systems - World of Fixings
8 6 The Trutek EPDM Rubber Nut is a versatile fixing for problem base materials, cavity fixings and dynamic loads. It can be used for fixing into perforated bricks, hollow concrete block, plastic, sheet metal, plywood and is especially effective in brittle materials. It fits tightly into irregular holes forming a watertight seal. Heating & ventilation systems Blind fixing Hollow concrete flooring Car panelling Brass nut resists corrosion Provides watertight seal Prevents leakage at joints Suitable where access is limited Expands into irregular holes Resists hot oils up to 110ºc Rubber Nut (EPDM) Thread Dia. Wall Min. Wall. Overall Flange Flange Rec Tightening Torque Nm Product Code TRN TRN TRN TRN TRN TRN TRN TRN TRN TRN TRN TRN TRN12750 Trutek Recoended Tensile s 3 10 Plasterboard 10 Plywood 7N Hollow Blocks Product Code TRN TRN04100 TRN TRN TRN TRN TRN TRN06250 TRN TRN TRN TRN TRN12750 s may vary subject to the condition of the base material 1. For hollow applications drill a hole the same diameter as the rubber nut through the cavity. For solid materials, drill to a min. depth equal to the length of rubber nut. 2. Remove debris and clean hole thoroughly. 3. Insert the rubber nut upto the flange.then put the fixture in place. 4. Insert bolt and tighten. The rubber nut works as well in regular holes by expanding firmly against the sides of the hole. Telephone: Fax: sales@trutekfasteners.co.uk Website: 7
9 7 The Trutek Hollow Wall is a preassembled cavity fastener. It can be used to fix into plasterboard, clay pot ceilings, sheet steel. Small Sizes can be used to fix into hardboard and plywood.the screw in this fixing can be removed and re-fitted making it ideal for removal of fixtures for redecorating. The Trutek Setting Tool is available which allows for fast, repetitive fixing. Electrical fittings Shelving Pipe saddles Radiators Brackets Hollow Wall Zinc and yellow passivated Combination head screw Anti rotation lugs Large flange prevents pull into base Fast installation with setting tool The screw can be removed and re-fitted Flush finish head Plug Size Wall Rec Tensile Kn Rec Sheer Kn 20 M4 X THW M4 X THW M4 X THW M4 X THW M5 X THW M5 X THW M5 X THW M6 X THW M6 X THW06070 Rec. loads are based on 12 plasterboard Hand Setting Tool THWT01 1. Drill hole the recoended size. 2. Insert the fixing into the hole.tap fixing lightly ensuring that the anti-rotation lugs penatrate the base material. 3. Attach setting tool to screw and position the anchor. Smaller sizes may be set with a screwdriver. 4. Remove the screw and position the fixture. Insert screw through fixture and base material and tighten until secure. Fasteners Limited Construction Fastening Systems - World of Fixings
10 The Trutek Spring Toggle is an all metal wing cavity fastener. It is ideal for ceiling installations due to its fire resistant properties. It offers high loadings in plasterboard as the wings spread the load over a wide area. Overhead lighting Curtain tracks Pictures High fire resistance Zinc and yellow passivated Machine screw for ease of tightening Spreads load over wide area Heavy gauge material for increased loads Heavy gauge nut prevents stripping Spring Toggle Wing & and Wing Only Thread Cavity Rec Tensile Kn Product Code 11 3 X TST X TST X TST X TST X TST X TST TST TST TST TST TST TST10 1. Drill hole the recoended size. 2. Compress the wings and push the fixing into the hole. 3. Tighten the screw until the fixture is secure. Nylon Toggle The Trutek Nylon Toggle is a one piece cavity fastener. It is a medium duty anchor for use in plasterboard. s can be removed and refitted to allow for redecoration and can be used with both woodscrews or self-tapping screws. Main applications are ceiling fixtures, light shelving, brackets and hooks. Wood Size Wood Guage Wall Min. Cavity Rec Tensile Kn Product Code TTA TTA TTA16 1. Drill an hole in base material. 2. Compress the wings and push the fixing into the hole. 3. Tap the fixing flush with the surface. 4. in the fixing making sure the screw length is 25 longer than the combined fixture & plasterboard. Telephone: Fax: sales@trutekfasteners.co.uk Website: 9
Ripple Construction Products Pvt Ltd
26 July 2017 1 Masonry: There is a tremendous variety of masonry bricks on the market. The different types of bricks (e.g. clay, sand-lime, or concrete bricks) are composed of different materials and are
More informationSigma Fasteners, Inc. Section 7
DESCRIPTION PAGE s Wedge s 7-1 Drop-In s 7-2 Single Expansion s 7-2 Machine Screw s 7-2 Lag Shields 7-3 Lead Wood Screw s 7-3 Hammer Drive s 7-4 Hollow Wall Fasteners 7-5 Toggle Bolts 7-6 Toggle Wings
More informationANCHORS SLEEVE ANCHORS BOLT DIAMETER
SLEEVE ANCHORS No hole spotting. No mis-alignments. Simply drill through the fixture into concrete, insert and tighten. Preassembled for fast, easy installation. No special tools necessary; meets federal
More informationSECTION MASONRY ANCHORAGE AND REINFORCEMENT. Display hidden notes to specifier. (Don't know how? Click Here)
PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 04080 MASONRY ANCHORAGE AND REINFORCEMENT Display hidden notes to specifier. (Don't know how? Click Here) A. Post installed masonry anchors. B. Miscellaneous
More informationCIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD METAL SCREWS. 6 x 3/4 P/N x 1 METAL SCREW P/N x 3/4 METAL SCREW
A21-1 1160 CIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD S For light duty applications in solid materials Color coded diameters for easy identifi cation Acid resistant NYLON FLANGED:
More informationALLIGATOR All-Purpose Anchors
ALLIGATOR All-Purpose s Description ALLIGATOR anchors are designed to hold high loads in solid walls, ceilings, and floors... but also hold securely when they encounter an unexpected cavity, such as in
More informationDYNABOLT PLUS ANCHORS DYNABOLT PLUS. Anchor Details. Installation Ramset Regions. Site Map. Home Page. Performance. Next Page. Date of Issue: 9/98
Date of Issue: 9/9 Dynabolt Plus is a general purpose all steel medium duty through fixing for masonry and concrete. For fixing to Concrete, solid and hollow brick, masonry, natural stone. Surface Finish
More informationTOGGLER Specialty Anchors
TOGGLER Specialty Anchors Description All TOGGLER Specialty Anchors can be used in any material (concrete, plywood, paneling, drywall, etc.) of any thickness above their minimum grip range. All TOGGLER
More informationSYW Industry Sdn. Bhd. Stud Anchor. Hexagon Nut / Flange Nut. U - Bolt (c/w 2 Nuts) Steel Band. 1 of 8
SYW Industry Sdn. Bhd. Stud Anchor Hexagon Nut / Flange Nut U - Bolt (c/w 2 Nuts) Steel Band 1 of 8 BT Anchor (MM size) Expansion Anchor 2 of 8 Set Anchor Sleeve Anchor with Flange Nut 3 of 8 BT Anchor
More informationReady To Go SimpleSpec tm. Installation Manual. For more information, please visit 3-form.com or call
Contents Overview ( 1) 3/8" Varia Panel = Cable Tensioner with Cover Plate KIT Stainless Steel: 3-15-1636-K Black Oxide: 3-15-2005-K Cable Tensioner with Cover Plate SS: 3-15-1636 BO: 3-15-2005 + M8 Thread
More informationHollo Set Drop-In Anchors
Description The Hollo Set drop-in anchor is an internally threaded, flush mount expansion anchor designed for use in hollow and solid base materials. In hollow concrete block and precast hollow core plank,
More informationDimensions Mechanical and Performance Requirements. Drop-In Anchors Hollow Wall, Steel Regular Style Drive Style...
Dimensions Mechanical and Performance Requirements Drop-In Anchors... 257 Hollow Wall, Regular Style... 258 Drive Style... 259 Hollow Wall, Plastic Ribbed... 260 Conical, Light Duty... 261 Fluted, Light
More informationWash basin and urinal fixings Complete fixing sets.
123 Wash basin and urinal fixings... page 124 WC and sanitary fixings... page 127 Accessories for sanitary fixings... page 129 WC fixing WB... page 131 On wall installation... page 132 124 SANITARY FIXINGS
More informationAnchor type Base material Approvals Application. Lightweight concrete Aerated concrete. Uncracked concrete. Solid brick masonry
Anchor selector Anchor type Base Approvals Application Mechanical anchor systems Heavy duty anchors HDA-T/ -TR/TF/-P/-PR/-PF undercut anchor Anchor fastening for high loads e.g. in steel construction and
More informationSECTION CONCRETE ANCHORING. Display hidden notes to specifier. (Don't know how? Click Here)
PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 03 15 00 CONCRETE ANCHORING Display hidden notes to specifier. (Don't know how? Click Here) A. General purpose mechanical anchors for horizontal and vertical
More informationUmbrella Inserts and Stubby Screens
ADHESIVE ANCHORING SPECIALISTS Umbrella Inserts and Stubby Screens High Performance Adhesive Systems for Fastening to Hollow Base Materials DESCRIPTION/ADVANTAGES Hollow Block Fastening with A7 Adhesive
More informationfischer DUOTEC NEW Easy to install nylon toggle for high loads in all panel building materials
fischer DUOTEC NEW Easy to install nylon toggle for high loads in all panel building materials fischer DUOTEC 10 Easy to install nylon toggle for high loads in gypsum plasterboard Flexible screw insert
More informationPRICE BOOK NO. 204S ORDERING INFORMATION
Container Quantities PRICE BOOK NO. 204S ORDERING INFORMATION Replacing Catalogue 789S Effective March, 2007 and Packaged items are supplied in full containers and we reserve the right to adjust order
More informationGLOBALLOY HIGH STRENGTH MASONRY ANCHORS KEEP MACHINERY AND FIXTURES SECURELY IN PLACE
GLOBALLOY HIGH STRENGTH MASONRY ANCHORS KEEP MACHINERY AND FIXTURES SECURELY IN PLACE THE HEAVIER THE LOAD THE HARDER THEY HOLD PRE-ASSEMBLED READY TO USE NO EXTRA NUTS OR BOLTS NO RE-SPOTTING OF MACHINERY
More informationHang-TITE Rod Hanger Screws
Description The Hang-TITE Rod Hanger Screw is a one-piece, internally threaded anchor designed for suspending threaded rod for applications like cable-tray, pipe hanging, fire protection, and electrical
More informationFlooring Nails 6-D Flooring Nails $3.40 / 1# 6-D Flooring Nails $14.50 / 5# 8-D Flooring Nails $3.40 / 1# 8-D Flooring Nails $14.
Nails Nails Drywall Screws Common Nails 4D Common Nails $3.85 / 1# 6D Common Nails $3.00 / 1# 6D Common Nails $74.25 / 50# 8D Common Nails $3.00 / 1# 8D Common Nails $74.25 / 50# 10D Common Nails $3.00
More informationfischer Test Report Fixing Tests for Fastfloor and Hollowcore Units
fischer Test Report Fixing Tests for Fastfloor and Hollowcore Units CONTENTS. Test Parameters. January 999. July 999. March 00. Fixings Products Tested. Fischer Nylon SX Plug. Fischer FNS Nail.
More informationFASTENERS C O M P AT I B L E W I T H F E R O T I E S Y S T E M S. Which FERO Tie Systems Require Fasteners?
FASTENERS C O M P AT I B L E W I T H F E R O T I E S Y S T E M S Which FERO Tie Systems Require Fasteners? Structural Actions: Fastener,, or Both? With the exception of FERO tie systems that are directly
More informationUmbrella Inserts and Stubby Screens
ADHESIVE ANCHORING SPECIALISTS Umbrella Inserts and High Performance Adhesive Systems for Fastening to Hollow Base Materials DESCRIPTION/ADVANTAGES Hollow Block Fastening with A7+ Adhesive Umbrella Inserts
More informationfischer fixing compass Panel building materials.
fischer fixing compass Panel building materials. Fastening simply and safely in panel building materials. Cavity metal fixing Our strongest solution for panel building materials. for gypsum plasterboard
More informationfischer NEW The installation-friendly nylon toggle plug for high loads in gypsum plasterboard.
fischer DUOtec NEW The installation-friendly nylon toggle plug for high loads in gypsum plasterboard. fischer DUOTEC. The intelligent combination for high loads in gypsum plasterboard. Due to its unique
More informationIF YOU DON T SEE IT HERE
www.smithfast.com Drills & Taps & Bits Screws Cotter Drilling Bolts / Hex Capscrews Lag Carraige Hitch Grade 8 Machine Grade Elevator 5 Sheet Spring Metal Roll Grade Eye 2 Square Taper Head set A325 Hex
More informationHilti HIT-1 / HIT-1 CE Adhesive Anchor System
Concrete Hilti HIT-1 / HIT-1 CE Adhesive Anchor System Injection mortar system Benefits Hilti HIT-1 / HIT-1 CE 300 ml foil tube cartridge Mixer HIT PM HIT-V rods Dispenser: - chemical injection fastening
More informationCone. Bolt. Rubber Washer. Rubber Washer. compressed / increased clamping force
Type HB - Hollo-Bolt Cavity Fixings 2 Type HB - Hollo-Bolt Steel, bright zinc plated plus JS 500 Steel, hot dip galvanised Stainless Steel Grade 316 Collar Sleeve Cone Bolt Suitable for hollow sections,
More informationFastener Type Chart. Fastener Categories. Sheet Metal Screws Fully threaded screws with a point for use in sheet metal. Abbreviated SMS.
Fastener Categories Wood Screws Machine Screws Thread Cutting Machine Screws Screws with a smooth shank and tapered point for use in wood. Abbreviated WS. Screws with threads for use with a nut or tapped
More informationSheet Steel Facts. Most common head design for self-drilling, self-tapping screws.
Sheet Steel Facts Fastener Guide for Sheet Steel Building Products August, 2003 Fastener Materials Fasteners are manufactured from several materials and coatings. For the purpose of this fact sheet, the
More informationInstallation Instruction
Tools Needed for Assembly Stud finder (for wood stud wall) Pencil Mark Electric drill Wood Stud Wall Installation Step 1. Locate the Wood Studs Installation Instruction Drill bit (for wood stud wall) Masonry
More informationStep by Step Installation Instructions. Poly Shutters. Customer Service or visit us online at smithandnoble.com
Step by Step Installation Instructions Poly Shutters Customer Service 800.248.8888 or visit us online at smithandnoble.com Thank you for purchasing from smith+noble. Your new window treatments have been
More informationChannel & Bolt Fixings
CI/SfB X 6 January 006 series/0. 4.0 Channel & Bolt Fixings Ties & Restraint s Masonry Support Systems Lintels Channel & Bolt Fixings Windpost s Reinforcement Flooring Systems 4.0 CHANNEL & BOLT FIXINGS
More informationConnector Technology, Shelf Supports Connection Fittings
MODULAR Connection fitting for recess mounting Finish: Burnished : For recess mounting The plate should allways be installed so that the supporting plate butts against the end of the recess. For rapid
More informationLarge Diameter Tapcon
CONCRETE ANCHORING SPECIALISTS Large Diameter Tapcon (LDT ) Anchors Finished head, Removable Anchor DESCRIPTION/SUGGESTED SPECIFICATIONS Self-threading Anchors SPECIFIED FOR ANCHORAGE INTO CONCRETE The
More informationHardware Fitting Accessories Accessories
Door viewer Suitable for door thicknesses (a) 34 52 mm Telescopic version Without flap Angle of vision: 160º Door drilling: 12 mm Suitable for door thicknesses (a) 35 78 mm Telescopic version Without flap
More informationLENGTH IDENTIFICATION
58 Power-Bolt HEAVY DUTY, ELF-UNDERCUTTING LEEVE TYPE BAE MATERIAL Concrete, Block, Brick, tone IZE RANGE 1/4" x 1" to 1-1/4" x 9 MATERIAL LENGTH IDENTIFICATION The Power-Bolt anchor has a length identification
More informationK/D FITTINGS & FASTENERS
K/ FITTINGS & FASTENERS -1 Screws P. 162-168 -2 Connector Bolts P. 169-173 -3 K/ Fittings P. 174-177 -4 Insert Nuts P. 178-181 -5 Allen Keys P. 182-183 -6 Nails & Wall Plugs P. 184 -1 Screws 1010 Machine
More informationThru Wall Floor Seals For New Installation
The O-Z/Gedney Thruwall and Floor Seals provide a positive means of sealing pipe, conduit or tube where they pass through a concrete foundation of a structure below grade or below ground water level or
More informationTAPPING SCREWS 1-1 TAPPING SCREWS PHILLIPS OVAL. 1 General Fasteners HEAD ZINC BLACK SIZE SIZE CHROME CHROMATE OXIDE
TAPPING SCREWS TAPPING SCREWS PHILLIPS OVAL HEAD ZINC BLACK SIZE SIZE CHROME CHROMATE OXIDE #4 x 3/8"... REG... 110001 #4 x 1/2"... REG... 105030... 110002 #4 x 5/8"... REG... 1 10003 #4 x 3/4"... REG...
More informationYOUR ONE SOURCE FOR CONCRETE FASTENERS PRODUCT CATALOG. p f East 40th Street Cleveland, Ohio
YOUR ONE SOURCE FOR CONCRETE FASTENERS PRODUCT CATALOG p 888.498.5747 1192 East 40th Street Cleveland, Ohio 44114 YOUR ONE SOURCE FOR CONCRETE FASTENERS 1192 East 40th Street Cleveland, Ohio 44114 TABLE
More informationThe All American Anchor is a positive drive positive setting anchor for use in all masonry materials / / /8 7 1/ /16
ALL AMERICAN ANCHORS A PIN DRIVE EXPANSION ANCHOR DIAMETER /4" 5/6" 3/8" /2" 5/8" 3/4" The All American Anchor is a positive drive positive setting anchor for use in all masonry materials. ALL AMERICAN
More informationEN your reliable connection. Special blind rivet nuts
EN 9100 Tubtara your reliable connection Special blind rivet nuts Geometry and mechanical values Dejond is manufacturing a wide range of blind rivet nuts with trademark TUBTARA. The standard programme
More informationNX8 SERIES 6-1/4 HANDRAIL W/ VINYL HANDGRIP
6-1/4 HANDRAIL W/ VINYL HANDGRIP TYPICAL ASSEMBLY 5 2 BUTT JOINT 12 10 9 1 8 11 6 3 7 4 BUTT JOINT COMPONENT LIST 1 LEFT RETURN 7 UPPER IMPACT ABSORBER 2 RIGHT RETURN 8 LOWER IMPACT ABSORBER 3 OUTSIDE
More informationPOWER-Skru Large Diameter Concrete Screw
POWER-Skru Large Diameter Concrete Screw Description The POWER-Skru Large Diameter Concrete Screw is a highstrength screw anchor with self-tapping threads that offer a unique undercutting design for anchoring
More informationFixings. Products - Fixings.
Fixings Our range of fixing products cater for every drywall need, ensuring simple yet secure fixing of plasterboard and metal framing. The range includes Gyproc screws, engineered for board-to-metal,
More informationMX8 SERIES 6-1/4 HANDRAIL W/ VINYL HANDGRIP
6-1/4 HANDRAIL W/ VINYL HANDGRIP TYPICAL ASSEMBLY 5 2 BUTT JOINT 12 10 9 1 8 11 6 3 7 4 BUTT JOINT COMPONENT LIST 1 LEFT RETURN 7 UPPER IMPACT ABSORBER 2 RIGHT RETURN 8 LOWER IMPACT ABSORBER 3 OUTSIDE
More informationBEST PRACTICE GUIDE. Socket Bases. Working with Concrete Slabs
Working with Concrete Slabs When working with concrete slabs the barrier protection can be erected in three ways - with socket bases, adjustable slab edge brackets and multi slab clamps. Socket Bases 1
More informationMETAL-TO-WOOD FASTENERS QUIKGRIP METAL2WOOD METAL2WOOD HD METAL2WOOD XD LOPRO 300SS. Value through the Roof.
METAL-TO-WOOD FASTENERS QUIKGRIP METAL2WOOD METAL2WOOD HD METAL2WOOD XD LOPRO 300SS Value through the Roof. Proven Performance. Huge Selection. Marco Quality. Value drives everything we do. That s why
More informationGeneral Information...SA1-SA4
SECTION S INDEX Product Description Page Number General Information................................................................SA1-SA4 Type FSK Thruwall & Floor Seal For Conduit, Pipe or Tubing............................
More informationNX7 SERIES 5-1/2 HANDRAIL
STORAGE & HANDLING The handrails are shipped unassembled. Upon receipt, immediately check all material for any damage that may have occurred in transit and verify that all of the items and quantities are
More informationSPEEDFRAME T h e s p e e d y w a y t o b e i n d i v i d u a l
SPEEDFRAME T h e s p e e d y w a y t o b e i n d i v i d u a l T h e a l l p u r p o s e c o n s t r u c t i o n k i t SPEEDFRAME All materials are kept close to hand in this specially designed Speedframe
More informationDesign Guide Pryda Connectors for Steel Framing
Pryda Connectors for Steel Framing Copyright: (c) Pryda Australia A Division of ITW Australia November 2012 November 2012 Design Guide Pryda Connectors for Steel Framing INDEX General Notes General information
More informationInstallation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens
Installation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens Models: PLAV 70-UNL, PLAV 70-UNL-S PLAV 70-UNLP, PLAV 70-UNLP-S R This product is UL Listed. It must be
More informationRIVETING Rivet types Solid rivets Solid rivets are used less and less. They have been replaced in many cases by welding or bonding.
10.1 Rivet types 10.1.1 Solid rivets Solid rivets are used less and less. They have been replaced in many cases by welding or bonding. Because of the large countersinking angle of 140 flat countersunk
More informationMATERIAL COMBINATION NUMBER 2: Corrosive environment requiring harder, wear-resistant seating faces and resistance to dezincification.
Cast Iron Slide Gates Spec Sheet General The contractor shall furnish and install the following cast iron slide gate assemblies as listed on the Gate Schedule and detailed on the manufacturer s drawings.
More informationAssembly Instructions
Jury Base Seating January 2014 - Floor Anchor Specifications / 4 5 / 16 (4)½ diameter holes 1/ 4 2 4 8 #12.750.KIT4 1 5 / Hilti 4 KH-EZx2/ 8 Max. Torque: 18 ft/lbs punch clearance hole in carpet before
More informationMEFA mounting accessories
MEFA mounting accessories Mounting accessories Base plates Page 5/2 Double holder Page 5/4 Height-adjustable suspensions Page 5/5 Pendular bolt joints Page 5/6 Trapeze hanger Page 5/7 Threaded hooks, distance
More informationNew Product Release: October 2014 Boone Racks
New Product Release: October 2014 Boone Racks Double Fido Fountain Mounting: Surface NOTE: THESE ROUGH-IN DIMENSIONS MAY VARY ½: (13 mm) PLUS OR MINUS NOTE: All dimensions subject to manufacturing variance
More informationSpiral gypsum plasterboard fixing
Spiral gypsum plasterboard fixing No pre-drilling: in single sheet gypsum plasterboard No surface cracking due to special thread geometry High load bearing values up to 8 kg in gypsum plasterboard per
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS HIGH PRESSUE LAMINATE (HPL) TOILET PARTITIONS 1030 TrimLineSeries 1040 DesignerSeries Includes continuous hardware option.65. IMPORTANT: Storage and Handling Information on last
More informationBUILT BY AMERICA. CONNECTED WORLDWIDE.
P R O D U C T G U I D E 1 MECHANICAL ANCHORING SYSTEMS BUILT BY AMERICA. CONNECTED WORLDWIDE. It s a simple idea: make products as reliable and innovative as the people who use them. Today, we are the
More informationFASTENERS ANCHORS - ADHESIVE. AC100E Professional Kits. Fasteners - Adhesive Anchoring-Concrete & Masonry
ANCHORS - ADHESIVE AC100E Professional Kits Adhesive value pack for the professional has all the required accessories for post installed chemical anchors, this easy to handle all-in-one kit keeps all your
More informationCodes: INCO, INSI, INPISANIN, INPINZANI. Reference: FT INDE-en Date: 23/03/18 Revision: 7 Page: 1 of 6 IN-CO IN-HE IN-SI CHARACTERISTICS
Reference: FT -en Date: 23/03/18 Revision: 7 Page: 1 of 6 IN-CO IN-HE IN-SI INPISANIN INPINZANI CHARACTERISTICS Anchor for hollow elements as airbrick, dry wall, plaster wall, etc. Maximum load in thin
More informationInstallation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens
Installation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens Models: PLAV 70-UNL, PLAV 70-UNL-S PLAV 70-UNLP, PLAV 70-UNLP-S R This product is UL Listed. It must be
More informationRELINER INSIDE DROP SYSTEM SPECIFICATIONS
1. PRODUCT NAME RELINER INSIDE DROP SYSTEM U.S. Patent 6074130 Canadian Patent # 2269565 All RELINER Products are proudly made in the U.S.A. 2. MANUFACTURER RELINER /Duran Inc. 53 Mount Archer Rd. Lyme
More informationInstallation Instructions
Column & Beam Units with Debris Netting Installation Instructions Laminated Wood Systems, Inc. Seward, Nebraska 800-949-3526 2015 LWS, INC. AVR-NET INSTALL 05-12-16 AVR Installation Notes 1 Safety The
More informationFASTENERS & ACCESSORIES
Staples General purpose staples to suit most popular staple guns. Particularly useful for stapling external angles and PVC mouldings to timber frames. PlasterX staples are designed to fit PLASTERX Arrow
More informationE-Z LOK Products are available from MARYLAND METRICS P.O. Box 261 MD USA
E-Z LOK Products are available from MARYLAND METRICS P.O. Box 261 MD 21117 USA phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com
More informationWallboard or plastic Pre-drill holes and use hollow wall anchors or toggle bolts to install your shade in wallboard or plastic.
Woven Wood Shades Installation Instructions Email: customerservice@blindster.com Call us: (888) 256-8672 Mon - Fri 8am - 7pm (CT) Congratulations on purchasing Woven Wood Shades from Blindster. This window
More informationMounting Accessories. Installation Guide. VIVOTEK SD83XXE Speed Dome
VIVOTEK SD83XXE Speed Dome Mounting Accessories AM-116/117 Pendant Pipe AM-118 Pendant Head AM-221 Gooseneck AM-231 Parapet Mount AM-519 Pendant Adaptor Installation Guide Corresponding part numbers: AM-116:
More informationToilet Partition Hardware
Concealed and Surface Mounted Latches Toilet Partition Hardware D D 91-8 Used with 91-129 Housing merican Metal 91-330 Used with 91-129 Housing 91-84 91-130 For 1" Laminated Door 91-131 With Flat Tip Bar.
More informationTech Guide. Screw Anchor Performance Why use a screw anchor? Ease in installation
Why use a screw anchor? Screw anchors are used in medium duty applications that normally require faster installation time, close concrete edge distance, close anchor spacing and removability of anchor.
More informationSecuAnch Roof Anchor System
Height Safety Products Email: marketing@fallprotec.com SecuAnch Roof Anchor System 1 Presentation The SecuAnch lifeline is designed to be permanently installed on buildings and other structures where maintenance
More informationMaterial Packing Brown Grey Pine Black White
RTA Connectors Minifix Zinc alloy For housing: 12 or 18 Bolt hole: Ø 7 or 8, depending on choice of connecting bolt Drilling distance B: Distance from centre of Minifix housing to shelf front edge (24
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
MULTIPURPOSE CLAMPS - USA SERIES 7: Lightweight and 4% stronger than C clamps. Floating jaws that always stay parallel. Designed to eliminate distorting or twisting action. Cantilever action provides 4:
More information28" Adjustable Solar Tilt Mount ADJ-28. Owner's Manual. Please read this manual BEFORE installing your solar tilt mount
28" Adjustable Solar Tilt Mount ADJ-28 Owner's Manual Please read this manual BEFORE installing your solar tilt mount SECTION 1 Introduction Mounting your solar panel inclined to an optimized angle with
More informationDobyGrip Accessories. Wire with Loop. Wire with Closed M6 & *M8 Eye Bolt. Wire with Carabina
Wire with Loop Quick and easy fixing to purlins, beams etc by forming a choke knot. Reduces the installation time compared to conventional methods of suspension. All wires are supplied including the DobyGrip
More informationv1.0 ASSEMBLY GUIDE Mia Wide Bookcase
v1.0 ASSEMBLY GUIDE Mia Wide Bookcase Components Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase.
More informationPocket Door Kit PD1 / PD2 Installation Instructions. Kit Contents.
Pocket Door Kit PD1 / PD2 Installation Instructions Kit Contents. 1, Create Rough Opening In Stud Wall Construct rough opening ensuring all sides are square and level. Rough opening should be; Height =
More informationLid, Floor Monument and Two Installation Fixtures. Floor Monument Installed with Lid On and Off
Monumentation Drilling Specifications: Floor Monuments: - Floor is drilled using 1 3/4" core drill bit to a depth of 2 with a Hilti rotary hammer drill - Quikrete is used to set monuments into the floor
More informationFASTENERS ANCHORS - ADHESIVE. AC100E Professional Kits. Fasteners - Adhesive Anchoring-Concrete & Masonry
ANCHORS - ADHESIVE AC100E Professional Kits Adhesive value pack for the professional has all the required accessories for post installed chemical anchors, this easy to handle all-in-one kit keeps all your
More informationAdjustable Feet Castors Accessories for Floor Elements
Adjustable Feet Castors Accessories for Floor Elements Products in this section Levelling Knuckle Feet Threaded spindles for infinite height adjustment Metal or plastic foot plate Knuckle Feet X Compatible
More informationTel / (USA & CANADA) /
Tel.58.847 / 8.388.459 (USA & CANADA) / Email sales@msdiscounttool.com MULTIPURPOSE CLAMPS - USA SERIES 7: Lightweight and 4% stronger than C clamps. Floating jaws that always stay parallel. Designed to
More informationPreference Collection and Treatment Console INSTALLATION GUIDE
Preference Collection 5580.69 and 5580.96 Treatment Console INSTALLATION GUIDE WARNING Failure to install the 5580 as described in this installation guide may cause the unit to collapse, resulting in serious
More informationINSTALLATION MANUAL Sluice Gates, Stop-logs & Screens
INSTALLATION MANUAL Sluice Gates, Stop-logs & Screens INTRODUCTION During manufacture and assembly of equipment great care is taken to ensure accuracy in mating the sealing faces on frame and doors, especially
More informationFloor Stops - Dome. FS13 Dome Stop. FS17 Dome Stop. R14 Riser. Features:
Floor Stops - Dome FS13 Dome Stop Standard FS13 for use where no threshold is used. Heavy-Duty Cast Dome Stops constructed of brass. Unique riser design of R14 (below) allows easy conversion to threshold
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS SOLID PHENOLIC TOILET PARTITIONS 1080 DuraLineSeries Class-A Fire Rated Includes Institutional Hardware Option.67 IMPORTANT: Storage and Handling Information on last page. Review
More informationMulti-Set II Drop-In Anchors
CONCRETE ANCHORING SPECIALISTS Internally Threaded Heavy- Duty Anchoring Systems DESCRIPTION/SUGGESTED SPECIFICATIONS Drop-In, Shell-Type Anchors SPECIFIED FOR ANCHORAGE INTO CONCRETE Drop-In, shell-type
More informationFixings & Fastenings. Bright Zinc Plated, Galvanised & Stainless Steel. Lockinex. ea i, ea u i
Fixings & Fastenings Bright Zinc Plated, Galvanised & Stainless Steel Lockinex ea i, ea u i INTRODUCTION The Lockinex Range of Fixings & Fastenings are manufactured in Bright Zinc Plate, Hot dipped galvanised
More informationPURE 150-PRO EPOXY ADHESIVE ANCHOR
ONLINE ANCHOR DESIGN SOFTWARE PURE 150-PRO EPOXY ADHESIVE ANCHOR Fully featured and easy to use interface Easy 5 step anchor design with 3D modelling of fastening Professional specification of DEWALT fastenings
More informationHUS 6 Screw anchor, Redundant fastening
HUS 6 Screw anchor, Anchor version HUS-A 6 Carbon steel Concrete Screw with hex head HUS-H 6 Carbon steel Concrete Screw with hex head HUS-I 6 Carbon steel Concrete Screw with hex head Benefits - Quick
More informationGROWING BETTER THROUGH DESIGN. 6ft Lean-To LEAN-TO. Assembly Instructions 04/02
GROWING BETTER THROUGH DESIGN 6ft Lean-To LEAN-TO Assembly Instructions 04/02 6ft Lean-To Greenhouse Base Plan Introduction/Tools/Contents / / Contents This is a copy of our Lean-To greenhouse base plan.
More informationinstallation instructions
installation instructions Easi-Plan WC Frame 820mm with Dual Flush Cistern ref: EPWC-05-1005 Easi-Plan WC Frame 980mm with Dual Flush Cistern ref: EPWC-05-1505 EASI-PLAN installation instructions Parts
More informationStep by Step Installation Instructions. Poly Shutters. Customer Service or visit us online at smithandnoble.com
Step by Step Installation Instructions Poly Shutters Customer Service 800.248.8888 or visit us online at smithandnoble.com THANK YOU for purchasing from smith+noble. Your new window treatments have been
More informationINSTALLATION TORSION SPRING FRONT OR REAR MOUNT LOW HEADROOM. 1 Cutting Vertical Track. 2 Fully Adjustable Jamb Brackets
TORSION SPRING FRONT OR REAR MOUNT LOW HEADROOM Wayne Dalton, a division of Overhead Door Corporation P.O. Box 67, Mt. Hope, OH., 44660 Supplemental insert Copyright 2015 Wayne Dalton, a division of Part
More informationSTANDARD GRAVITY BOX TARP INSTALLATION
OPERATORS MANUAL Rev. 9.9.2016 STANDARD GRAVITY BOX TARP INSTALLATION J. & M. Mfg. Co., Inc. 284 Railroad Street - P.O. Box 547 Fort Recovery, OH 45846 Ph: (419) 375-2376 Fax: (419) 375-2708 www.jm-inc.com
More informationASSEMBLY INSTRUCTIONS DIY WALL BED KIT QUEEN BI FOLD DOOR CABINET & MECHANISM. Tools Required For Assembly. 6.5mm Masonry Drill Bit
ASSEMBLY INSTRUCTIONS DIY WALL BED KIT QUEEN BI FOLD DOOR CABINET & MECHANISM Tools Required For Assembly No 2 & No 4 Phillips Head Screwdrivers No 2 Slot Head Screwdriver Hammer Electric Drill (Hammer
More information800-753-9688 sales@novadisplay.com www.novadisplay.com 6.0mm Rod Fixings Components 6mm Basic Rod Fixings RAS TOP/BOTTOM FIXINGS FOR ROD - Includes Spring Tensioner, top/ceiling and bottom/floor fixings
More information