TECHNICAL DATA SHEET
|
|
- Cecilia Park
- 5 years ago
- Views:
Transcription
1 Certificates ETA 16/0596 ETA 16/ Page 1 of 6 Certification for anchoring of threaded bars in non-cracked concrete (Option 7) Certification for anchoring in solid and hollow masonry, with threaded bar or internal threaded socket and plastic sleeve Complies with LEED requirements, IEQ Credit 4.1 Class A+ for emission of volatile organic compounds (VOCs) in living spaces Base material Certified use Specific use Suitable use Non-cracked concrete Solid masonry Hollow masonry Hollow block Concrete masonry unit Natural stone Solid, perforated and hollow masonry Cellular concrete Sizes Art. Content Mixer Applicator HH ml HH HH Intended use Dry or wet non-cracked concrete Dry masonry, installation in dry or wet substrate Installation temperature: between +5 and +30 C Work temperature: between -40 and +40 C (maximum short term temperature +40 C; long term +24 C) Shelf life:18 months for 410 ml cartridges (storage temperature between +5 and +25 C) Time and temperatures Temperature of base material Working time Full curing +5 to +9 C 10 min 145 min +10 to +14 C 8 min 85 min +15 to +19 C 6 min 70 min +20 to +29 C 4 min 50 min +30 to +34 C 3 min 35 min +35 to 39 C 3 min 20 min d = bar diameter L = bar length t fix = fixable thickness d 0 = hole diameter h 1 = minimum hole depth h nom = setting depth h ef = effective anchorage depth T inst = tightening torque use without sleeve: h ef = h 1 = h nom
2 Use in non-cracked concrete Installation Page 2 of 6 Setting parameters M16 M20 M24 Hole diameter d 0 mm Hole depth h ef.min mm h ef.max mm Minimum spacing s min mm Minimum edge distance c min mm Min. base material thickness h min mm h ef h ef + 2d 0 Tightening torque T inst Nm Strength data Valid for a single anchor beyond the minimum edge distance, on a thick concrete member of class C20/25 with sparse reinforcing. Characteristic resistance (kn) M16 M20 M24 Embedment depth h ef mm Tension N Rk kn Shear V Rk kn Design resistance (kn) M16 M20 M24 Embedment depth h ef mm Tension N Rd kn Shear V Rd kn Recommended load (kn) bar size M8 M10 M12 M16 M20 M24 Embedment depth h ef mm Tension N rec kn Shear V rec kn kn = 100 kg Steel failure, class 5.8 Characteristic resistances N Rk and V Rk derive from parameters certified in European Technical Assessment ETA 16/0596. Design resistances N Rd e V Rd include partial safety factors on strengths. Recommended loads N rec and V rec include the further 1.4 safety factor. For the design of fixing with reduced spacing, near the edge or on concrete with increased resistance, reduced thickness or dense reinforcement refer to ETA 16/0596 or to Declaration of Performance DPGEB1006 and use the design method outlined in EOTA s Technical Report 029 or in CEN/TS :2009.
3 Use in masonry Installation Page 3 of 6 Base material Solid brick Hollow brick Classification (acc. to EN 771-1) Min. density ρ (kg/dm 3 ) L/W/H (mm) Min. compr. strength f b (N/mm 2 ) Clay brick MZ 12-2,0-NF 240/116/ Calcium silicate brick KS 12-2,0-NF 240/115/ Hollow clay brick (c1) HLZ 12-1,0-2DF 235/112/ Hollow clay brick (c2) HLZW 6-0,7-8DF 250/240/ silicate brick (c3) KSL 12-1,4-3DF 240/175/ silicate brick (c4) KSL 12-1,4-8DF 250/240/ hollow block (c5) HBL 2-0,45-10DF 250/300/ hollow block (c6) HBL 4-0,7-8DF 250/240/ Concrete masonry unit (c7) HBN 4-12DF 370/240/ It is possible to use other bricks after job site tests conducted according to Annex B of ETAG 029 Setting parameters Anchor rod in solid masonry without sleeve bar size M8 M10 M12 Nominal diameter of drill bit d 0 mm Effective anchorage depth h ef mm Diameter of clearance hole in the fixture d fix mm Depth of the drilling hole h 1 mm Maximum installation torque T inst Nm Anchor rod in solid and hollow or perforated masonry with sleeve bar size M8 M10 M12 Sleeve 16x85 16x85 20x85 Nominal diameter of drill bit d 0 mm Effective anchorage depth h ef mm Installation depth of sleeve h nom mm Diameter of clearance hole in the fixture d fix mm Depth of the drilling hole h 1 mm Maximum installation torque T inst Nm Internal threaded socket in solid and hollow or perforated masonry with sleeve bar size M8 M10 M12 Internal threaded socket CBA08-12x80 CBA10-14x80 CBA12-16x80 Sleeve 16x85 20x85 20x85 Nominal diameter of drill bit d 0 mm Effective anchorage depth h ef mm Installation depth of sleeve h nom mm Diameter of clearance hole in the fixture d fix mm Depth of the drilling hole h 1 mm Maximum installation torque T inst Nm 2 2 2
4 Minimum and critical spacing and distances anchor rod Clay brick Calcium silicate brick Hollow clay brick (c1) Hollow clay brick (c2) silicate brick (c3) silicate brick (c4) hollow block (c5) hollow block (c6) Concrete masonry unit (c7) Spacing parallel to horizontal joint s cr II = s min II mm Spacing perpendicular to horizontal joint s cr = s min mm Spacing perpendicular to horizontal joint s cr = s min mm Spacing parallel to horizontal joint s cr II = s min II mm Spacing perpendicular to horizontal joint s cr = s min mm Spacing perpendicular to horizontal joint s cr = s min mm Spacing parallel to horizontal joint s cr II = s min II mm Spacing perpendicular to horizontal joint s cr = s min mm Edge distance c cr = c min mm Spacing perpendicular to horizontal joint s cr = s min mm Spacing parallel to horizontal joint s cr II = s min II mm Spacing perpendicular to horizontal joint s cr = s min mm Minimum and critical spacing and distances internal threaded socket Clay brick Calcium silicate brick Hollow clay brick (c1) Hollow clay brick (c2) silicate brick (c3) Page 4 of 6 Spacing parallel to horizontal joint s cr II = s min II mm Spacing perpendicular to horizontal joint s cr = s min mm Spacing perpendicular to horizontal joint s cr = s min mm Spacing parallel to horizontal joint s cr II = s min II mm Spacing perpendicular to horizontal joint s cr = s min mm
5 Page 5 of 6 silicate brick (c4) hollow block (c5) hollow block (c6) Concrete masonry unit (c7) Spacing parallel to horizontal joint s cr II = s min II mm Spacing perpendicular to horizontal joint s cr = s min mm Edge distance c cr = c min mm Spacing perpendicular to horizontal joint s cr = s min mm Spacing parallel to horizontal joint s cr II = s min II mm Spacing perpendicular to horizontal joint s cr = s min mm Edge distance c cr = c min mm Spacing parallel to horizontal joint s cr II = s min II mm Spacing perpendicular to horizontal joint s cr = s min mm Strength data Valid for a single anchor beyond the minimum edge distance. Characteristic resistance under tension and shear anchor rod (kn) Clay brick N Rk = V Rk Calcium silicate brick N Rk = V Rk Hollow clay brick (c1) N Rk = V Rk Hollow clay brick (c2) N Rk = V Rk silicate brick (c3) N Rk = V Rk silicate brick (c4) N Rk = V Rk hollow block (c5) N Rk = V Rk hollow block (c6) N Rk = V Rk Concrete masonry unit (c7) N Rk = V Rk Design resistance under tension and shear anchor rod (kn) Clay brick N Rd = V Rd Calcium silicate brick N Rd = V Rd Hollow clay brick (c1) N Rd = V Rd Hollow clay brick (c2) N Rd = V Rd silicate brick (c3) N Rd = V Rd silicate brick (c4) N Rd = V Rd hollow block (c5) N Rd = V Rd hollow block (c6) N Rd = V Rd Concrete masonry unit (c7) N Rd = V Rd Recommended load under tension and shear anchor rod (kn) Clay brick N rec = V rec Calcium silicate brick N rec = V rec Hollow clay brick (c1) N rec = V rec Hollow clay brick (c2) N rec = V rec silicate brick (c3) N rec = V rec silicate brick (c4) N rec = V rec hollow block (c5) N rec = V rec hollow block (c6) N rec = V rec Concrete masonry unit (c7) N rec = V rec kn = 100 kg
6 Page 6 of 6 Characteristic resistance under tension and shear internal threaded socket (kn) Clay brick N Rk = V Rk Calcium silicate brick N Rk = V Rk Hollow clay brick (c1) N Rk = V Rk Hollow clay brick (c2) N Rk = V Rk silicate brick (c3) N Rk = V Rk silicate brick (c4) N Rk = V Rk hollow block (c5) N Rk = V Rk hollow block (c6) N Rk = V Rk Concrete masonry unit (c7) N Rk = V Rk Design resistance under tension and shear internal threaded socket (kn) Clay brick N Rd = V Rd Calcium silicate brick N Rd = V Rd Hollow clay brick (c1) N Rd = V Rd Hollow clay brick (c2) N Rd = V Rd silicate brick (c3) N Rd = V Rd silicate brick (c4) N Rd = V Rd hollow block (c5) N Rd = V Rd hollow block (c6) N Rd = V Rd Concrete masonry unit (c7) N Rd = V Rd Recommended load under tension and shear internal threaded socket (kn) Clay brick N rec = V rec Calcium silicate brick N rec = V rec Hollow clay brick (c1) N rec = V rec Hollow clay brick (c2) N rec = V rec silicate brick (c3) N rec = V rec silicate brick (c4) N rec = V rec hollow block (c5) N rec = V rec hollow block (c6) N rec = V rec Concrete masonry unit (c7) N rec = V rec kn = 100 kg Characteristic resistances N Rk and V Rk derive from European Technical Assessment ETA 16/0595. Design resistances N Rd e V Rd include partial safety factor on strengths of 2.5. Recommended values N rec e V rec include the further 1.4 safety factor. For the design of groups of two or more fixings and for the resistance of a bar under shear with lever arm refer to ETA 16/0595 or to Declaration of Performance DPGEB1006 and use the design method A outlined in Annex C of ETAG 029 (issued by EOTA).
TECHNICAL DATASHEET MULTI ANCHOR GREEN PLUS styrene-free hybrid formulation chemical anchor
p. 1/6 Certificates ETA 16/0596 Certification for anchoring of threaded bars on non-cracked concrete (Option 7) ETA 16/0595 Certification for anchoring on solid and hollow masonry, with threaded bar or
More informationHK I. Anchor size (carbon steel) HK6 HK6L HK8 Resistance F Rk [kn] 2,0 5,0 5,0
HK HK I Anchor version Benefits - well proven - small drill bit diameter - for fixing in cracked concrete, redundant fastening only, e.g. suspended ceilings a ) Redundant fastening only Approvals / certificates
More informationHUS 6 Screw anchor, Redundant fastening
HUS 6 Screw anchor, Anchor version HUS-A 6 Carbon steel Concrete Screw with hex head HUS-H 6 Carbon steel Concrete Screw with hex head HUS-I 6 Carbon steel Concrete Screw with hex head Benefits - Quick
More informationPURE150-PRO CHEMICAL ANCHOR
PURE150-PRO CHEMICAL ANCHOR www.dewalt.com/anchors FAST CURING & HIGH STRENGTH ADHESION. The Pure150-PRO is a two-component high strength epoxy adhesive anchoring system designed for bonding steel elements
More informationHilti HIT-1 / HIT-1 CE Adhesive Anchor System
Concrete Hilti HIT-1 / HIT-1 CE Adhesive Anchor System Injection mortar system Benefits Hilti HIT-1 / HIT-1 CE 300 ml foil tube cartridge Mixer HIT PM HIT-V rods Dispenser: - chemical injection fastening
More informationHPD Aerated concrete anchor. Approvals / certificates. Basic loading data (for a single anchor)
HPD Anchor version HPD Benefits - anchor for autoclaved aerated concrete - maximum use of base material capacity - setting without drilling Autoclaved aerated concrete Fire resistance Sprinkler approved
More informationHVU2 adhesive capsule Anchor design (ETAG 001) / Rods&Sleeves / Concrete
HVU2 adhesive capsule Anchor design (ETAG 001) / Rods&Sleeves / Concrete Anchor version Benefits HVU2 Mortar capsule Anchor rod: HAS HAS-R HAS-HCR (M8-M30) Anchor rod: HAS-E HAS-E-R HAS-E-HCR (M8-M30)
More informationEuropean Technical Assessment. ETA-14/0426 of 15 December English translation prepared by DIBt - Original version in German language
European Technical Assessment ETA-14/0426 of 15 December 2014 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationHUD-1 Universal anchor
HUD-1 Universal anchor Anchor version HUD-1 Benefits - fast setting - flexibility of screw length - an anchor for every base material oncrete Solid brick Hollow brick Autoclaved aerated Drywall Basic loading
More informationEuropean Technical Assessment. ETA-14/0426 of 21 December English translation prepared by DIBt - Original version in German language
European Technical Assessment ETA-14/0426 of 21 December 2016 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationPURE 150-PRO EPOXY ADHESIVE ANCHOR
ONLINE ANCHOR DESIGN SOFTWARE PURE 150-PRO EPOXY ADHESIVE ANCHOR Fully featured and easy to use interface Easy 5 step anchor design with 3D modelling of fastening Professional specification of DEWALT fastenings
More informationAnchor HSA Fastening. Technology Manual HSA. Stud anchor. Version /
Anchor HSA Fastening Stud anchor Technology Manual HSA Stud anchor Version 2016-09 09 / 2016 1 HSA Stud anchor Anchor version Benefits HSA Carbon steel with DIN 125 washer HSA-F Carbon steel hot dipped
More informationHSV EXPANSION ANCHOR. Technical Datasheet Update: Dec-17
HSV EXPANSION ANCHOR Technical Datasheet Update: Dec-17 HSV Expansion anchor Economical expansion anchor for uncracked concrete Anchor version HSV (F) (M8-M16) HSV-BW (M8-M16) Benefits - Torque-controlled
More informationHUS3 redundant SCREW ANCHOR. Technical Datasheet Update: Dec-17
HUS3 redundant SCREW ANCHOR Technical Datasheet Update: Dec-17 HUS3 Screw anchor Ultimate performance screw anchor for redundant fastening applications Anchor version HUS3-H (R) HUS3-C HUS3-A Benefits
More informationHilti HIT-HY 200 with HIT-Z
Hilti Injection Mortar System Benefits Hilti -R 500 ml foil pack (also available as 330 ml foil pack) Static mixer no cleaning required: zero succeptability to borehole cleaning conditions with dry and
More informationPowers Trak-It XH and HD nails for gas actuated tools C4 and C5
European Technical Assessment ETA-12/0188 of 7 October 2016 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationInternal threaded version: HSC-I carbon steel internal version HSC-IR Stainless steel version (A4) Hilti anchor design software
Anchor version Benefits Internal threaded version: HSC-I carbon steel internal version HSC-IR Stainless steel version (A4) the perfect solution for small edge and space distance suitable for thin concrete
More information(English language translation, the original version is in French language) fischer Anchor bolt EXA
Centre Scientifique et Technique du Bâtiment 84, avenue Jean Jaurès CHAMPS SUR MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 Autorisé et notifié conformément
More informationHUS-V SCREW ANCHOR. Technical Datasheet Update: Dec-17
HUS-V SCREW ANCHOR Technical Datasheet Update: Dec-17 HUS-V Screw anchors Economical screw anchor with hex head Anchor version Benefits - High productivity- less drilling and fewer operations than with
More informationUmbrella Inserts and Stubby Screens
ADHESIVE ANCHORING SPECIALISTS Umbrella Inserts and High Performance Adhesive Systems for Fastening to Hollow Base Materials DESCRIPTION/ADVANTAGES Hollow Block Fastening with A7+ Adhesive Umbrella Inserts
More informationUmbrella Inserts and Stubby Screens
ADHESIVE ANCHORING SPECIALISTS Umbrella Inserts and Stubby Screens High Performance Adhesive Systems for Fastening to Hollow Base Materials DESCRIPTION/ADVANTAGES Hollow Block Fastening with A7 Adhesive
More informationHDA-P HDA-PR HDA-PF Anchor for presetting. HDA-T HDA-TR HDA-TF Anchor for through-fasting. Nuclear ICC. Steel failure
Anchor version Benefits HDA-P HDA-PR HDA-PF Anchor for presetting HDA-T HDA-TR HDA-TF Anchor for through-fasting suitable for non-cracked and cracked concrete C 20/25 to C 50/60 mechanical interlock (undercut)
More informationDYNABOLT PLUS ANCHORS DYNABOLT PLUS. Anchor Details. Installation Ramset Regions. Site Map. Home Page. Performance. Next Page. Date of Issue: 9/98
Date of Issue: 9/9 Dynabolt Plus is a general purpose all steel medium duty through fixing for masonry and concrete. For fixing to Concrete, solid and hollow brick, masonry, natural stone. Surface Finish
More informationHUD-1 Plastic anchor Economical universal plastic anchor
HUD-1 Plastic anchor Economical universal plastic anchor Anchor version HUD-1 (M5-M14) Benefits - Flat setting - Flexibility of screw length - An anchor for every base material Base material oncrete (non-cracked)
More informationCodes: INCO, INSI, INPISANIN, INPINZANI. Reference: FT INDE-en Date: 23/03/18 Revision: 7 Page: 1 of 6 IN-CO IN-HE IN-SI CHARACTERISTICS
Reference: FT -en Date: 23/03/18 Revision: 7 Page: 1 of 6 IN-CO IN-HE IN-SI INPISANIN INPINZANI CHARACTERISTICS Anchor for hollow elements as airbrick, dry wall, plaster wall, etc. Maximum load in thin
More informationHollo Set Drop-In Anchors
Description The Hollo Set drop-in anchor is an internally threaded, flush mount expansion anchor designed for use in hollow and solid base materials. In hollow concrete block and precast hollow core plank,
More informationHSL-3 / HSL-3-R EXPANSION ANCHOR. Technical Datasheet Update: Oct-18
HSL-3 / HSL-3-R EXPANSION ANCHOR Technical Datasheet Update: Oct-18 HSL-3 / HSL-3-R expansion anchor Ultimate-performance heavy-duty expansion anchor Anchor versions a) Condition valid only for HSL-3 carbon
More informationSubject of approval: fischer concrete screw ULTRACUT FBS II for the temporary fastening of building site equipment
Date: Reference: 13 July 2016 I 25-1.21.8-49/15 Approval number: Validity Z-21.8-2049 from: 13 July 2016 Applicant: fischerwerke GmbH & Co. KG Klaus-Fischer-Straße 1 72178 Waldachtal to: 13 July 2021 Subject
More informationHSL-3 / HSL-3-R EXPANSION ANCHOR. Technical Datasheet Update: Dec-17
HSL-3 / HSL-3-R EXPANSION ANCHOR Technical Datasheet Update: Dec-17 HSL-3 / HSL-3-R expansion anchor Ultimate-performance heavy-duty expansion anchor Anchor versions a) Condition valid only for HSL-3 carbon
More informationITB TECHNICAL APPROVAL AT /2011
INSTYTUT TECHNIKI BUDOWLANEJ P L 0 0 6 1 1 W A R S A W, u l. F I L T R O W A 1 Phone: (48 22) 825-04-71; (48 22) 825-76-55; fax (48 22) 825-52-86 M e m b e r o f t h e E u r o p e a n U n i o n o f A g
More informationPURE GP. Adhesives GENERAL INFORMATION SECTION CONTENTS. Epoxy Injection Adhesive Anchoring System
General Information GENERAL INFORMATION PURE GP Epoxy Injection Adhesive Anchoring System PRODUCT DESCRIPTION The Pure GP is a two-component adhesive anchoring system. The system includes injection adhesive
More informationWash basin and urinal fixings Complete fixing sets.
123 Wash basin and urinal fixings... page 124 WC and sanitary fixings... page 127 Accessories for sanitary fixings... page 129 WC fixing WB... page 131 On wall installation... page 132 124 SANITARY FIXINGS
More informationfischer DUOTEC NEW Easy to install nylon toggle for high loads in all panel building materials
fischer DUOTEC NEW Easy to install nylon toggle for high loads in all panel building materials fischer DUOTEC 10 Easy to install nylon toggle for high loads in gypsum plasterboard Flexible screw insert
More informationLetter of Transmittal/Submittal
Letter of Transmittal/Submittal FROM: TO: Baker Concrete Construction 1904 Jasper Street DATE JOB NUMBER 09/23/10 Aurora, CO 80011 9921 303.367.8111 ATTENTION Nick Dewald 937.536.9000 RE: Bruce Herman
More informationALUMIDI. Concealed beam hanger with and without holes Aluminum alloy tridimensional perforated plate ALUMIDI - 01 CERTIFIED STEEL-ALUMINUM
ALUMIDI Concealed beam hanger with and without holes Aluminum alloy tridimensional perforated plate CERTIFIED Available with and without holes. The 2200 mm model is also certified FIELD OF USE Timber-to-Timber
More informationHALFEN Anchor channel HTA / Special screw HS
DECLARATION OF PERFORMANCE HALFEN Anchor channel HTA / Special screw HS CONF-DOP_HTA 02/16-E No. H01-09/0339 1. 2. 3. 4. 5. 6. 7. 8. Unique identification code of the HALFEN Anchor channel HTA / HALFEN
More informationCast-in Ferrule Connections Load/Displacement Characteristics in Shear
Cast-in Ferrule Connections Load/Displacement Characteristics in Shear Ian Ferrier 1 and Andrew Barraclough 2 1 Product Manager - Connections, ITW Construction Systems ANZ. 2 Research and Development Manager,
More informationWELDA FASTENING PLATES
FASTENING PLATES Author: Markus Junes, M. Sc. Civ. Eng. R&D Manager, Peikko Group 1. INTRODUCTION Peikko Group has launched a new family of Fastening Plate products with resistances calculated on the basis
More informationPEC-TA Cast-in Channels and Bolts. Certified German quality for high-end fixing solutions. Advantages of using PEC Cast-in Channels.
Fixing Technology s and Bolts PEC Cast-in Channels are ideally suited for quick, reliable and cost-efficient fixing of different construction elements. The possibility of making simple and flexible adjustments
More informationCONTENTS. Hammerscrews White Zinc Plated 2 Hammerscrews Stainless Steel A Nylon Frame Anchors Yellow Zinc Plated 3 Nylon Plug 3
C CONTENTS CONTENTS PAGE 1 HAMMERSCREWS Haerscrews White Zinc Plated 2 Haerscrews Stainless A2-304 2 2 NYLON FRAME ANCHOR Nylon Frame s Yellow Zinc Plated 3 Nylon Plug 3 3 WINDOW FRAME ANCHOR Window Frame
More informationTECHNICAL MANUAL. HPM Rebar Anchor Bolt Easy and Fast Bolted Connections
TECHNICAL MANUAL HPM Rebar Anchor Bolt Easy and Fast Bolted Connections Version: PEIKKO GROUP 01/2015 HPM Anchor Bolt For bolted connections System benefits Standardized and approved rebar anchor bolt
More informationBX 3 system: fasteners for Interior Finishing, Mechanical and Electrical and Building Construction applications
Product data BX 3 system BX 3 system: fasteners for Interior Finishing, Mechanical and Electrical and Building Construction applications BX 3 battery-actuated direct fastening tools BX 3-ME BX 3-IF Fasteners
More informationRipple Construction Products Pvt Ltd
26 July 2017 1 Masonry: There is a tremendous variety of masonry bricks on the market. The different types of bricks (e.g. clay, sand-lime, or concrete bricks) are composed of different materials and are
More informationBUILT BY AMERICA. CONNECTED WORLDWIDE.
P R O D U C T G U I D E 1 MECHANICAL ANCHORING SYSTEMS BUILT BY AMERICA. CONNECTED WORLDWIDE. It s a simple idea: make products as reliable and innovative as the people who use them. Today, we are the
More informationBX 3 system: fasteners for Mechanical & Electrical and Interior Finishing applications
BX 3 system: fasteners for Mechanical & Electrical and Interior Finishing applications Product data BX 3 battery-actuated fastening tool Nails (For fastening to concrete) X-P 17/20/24 B3 MX X-P 30/36 B3
More informationReady To Go SimpleSpec tm. Installation Manual. For more information, please visit 3-form.com or call
Contents Overview ( 1) 3/8" Varia Panel = Cable Tensioner with Cover Plate KIT Stainless Steel: 3-15-1636-K Black Oxide: 3-15-2005-K Cable Tensioner with Cover Plate SS: 3-15-1636 BO: 3-15-2005 + M8 Thread
More informationSECTION MASONRY ANCHORAGE AND REINFORCEMENT. Display hidden notes to specifier. (Don't know how? Click Here)
PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 04080 MASONRY ANCHORAGE AND REINFORCEMENT Display hidden notes to specifier. (Don't know how? Click Here) A. Post installed masonry anchors. B. Miscellaneous
More informationINSTALLATION MANUAL OF ADJUSTABLE BALUSTRADE PROFILES LK110/112
INSTALLATION MANUAL OF ADJUSTABLE BALUSTRADE PROFILES /112 STEELPRO LTD 1 Steelpro /112 unimount profiles can be mounted on an uneven surface because the adjustment is performed simultaneously when fixing
More informationErstantie 2, FIN Villähde Tel , Fax
www.anstar.eu 2 www.anstar.eu 3 CONTENTS Page 1 PRODUCT DESCRIPTION...4 2 MATERIALS AND STRUCTURE...4 2.1 PRODUCT RANGE...4 2.2 MATERIALS...4 2.3 MANUFACTURING...4 2.4 MANUFACTURING TOLERANCES...4 2.5
More informationLarge Diameter Tapcon
CONCRETE ANCHORING SPECIALISTS Large Diameter Tapcon (LDT ) Anchors Finished head, Removable Anchor DESCRIPTION/SUGGESTED SPECIFICATIONS Self-threading Anchors SPECIFIED FOR ANCHORAGE INTO CONCRETE The
More informationEurocode EN Eurocode 3: 3 Design of steel structures. Part 1-1: General rules and rules for buildings
Eurocode EN 1993-1-1 Eurocode 3: 3 Design of steel structures Part 1-1: General rules and rules for buildings Eurocode EN 1993-1-1 Eurocode 3 applies to the design of buildings and civil engineering works
More informationSECTION R507 DECKS DECKING LEDGER BOARD BEAM. FOOTING BEAM SPAN CANTILEVER For SI: 1 inch = 25.4 mm FIGURE R507.2 DECK CONSTRUCTION
SECTION R507 DECKS R507.1 Application. The provisions of this section shall provide prescriptive requirements for the design and construction of all uncovered, wood-framed, single-span exterior decks.
More informationEuropean Technical Approval ETA-10/0413
ETA-Danmark A/S Kollegievej 6 DK-2920 Charlottenlund Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 10 of the Council Directive 89/106/EEC
More informationInstallation Instruction
Tools Needed for Assembly Stud finder (for wood stud wall) Pencil Mark Electric drill Wood Stud Wall Installation Step 1. Locate the Wood Studs Installation Instruction Drill bit (for wood stud wall) Masonry
More informationSMKDSP 1,5/ 8. Extract from the online catalog. Order No.:
Extract from the online catalog SMKDSP 1,5/ 8 Order No.: 1733473 The figure shows a 10-position version of the product PC terminal block, Nominal current: 17.5 A, Nom. voltage: 250 V, Pitch: 5 mm, Number
More informationEuropean Technical Assessment. ETA-18/0045 of 22 February English translation prepared by DIBt - Original version in German language
European Technical Assessment ETA-18/0045 of 22 February 2018 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Deutsches Institut
More informationmetal anchors fixed on the profile back in combination with special nib bolts Product size covered
DECLARATION OF PERFORMANCE HALFEN Anchor channel HTA 40/22P and HTA 50/30P CONF-DOP_HTA-P 01/17-E No. H01-16/0453 1. 2. 3. 4. 5. 6. Unique identification code of the HALFEN Anchor channel HTA 40/22P and
More informationCone. Bolt. Rubber Washer. Rubber Washer. compressed / increased clamping force
Type HB - Hollo-Bolt Cavity Fixings 2 Type HB - Hollo-Bolt Steel, bright zinc plated plus JS 500 Steel, hot dip galvanised Stainless Steel Grade 316 Collar Sleeve Cone Bolt Suitable for hollow sections,
More informationPOWER-Skru Large Diameter Concrete Screw
POWER-Skru Large Diameter Concrete Screw Description The POWER-Skru Large Diameter Concrete Screw is a highstrength screw anchor with self-tapping threads that offer a unique undercutting design for anchoring
More informationSigma Fasteners, Inc. Section 7
DESCRIPTION PAGE s Wedge s 7-1 Drop-In s 7-2 Single Expansion s 7-2 Machine Screw s 7-2 Lag Shields 7-3 Lead Wood Screw s 7-3 Hammer Drive s 7-4 Hollow Wall Fasteners 7-5 Toggle Bolts 7-6 Toggle Wings
More informationTI: Efficient self tapping fasteners into concrete without plugs
TI: Efficient self tapping fasteners into concrete without plugs Application specific fastener solutions for use either with solid or pre-cast concrete substrates are highly sought after. Indeed, some
More informationProduct Catalogue United Kingdom
Product Catalogue United Kingdom BONDED ANCHORS 1980 s and R-HPT mechanical anchors 2007 1887-1897 RAWLINGS BROTHERS started out in London 1912 RAWLPLUG Trademark registration 1919 Rawlings Brothers THE
More informationKDS10/SO. Extract from the online catalog. Order No.:
Extract from the online catalog KDS10/SO Order No.: 1704059 The figure shows a 5-pos. version of the product PC terminal block, Nominal current: 76 A, Nom. voltage: 630 V, Pitch: 10 mm, Number of positions:
More informationWith time, the evolution of anchors have led to different designs More than one anchor type may be suitable for a particular purpose Thus there are
Supreme range of Soil & rock anchors Introduction Used to anchor into concrete, masonry, stone With time, the evolution of anchors have led to different designs More than one anchor type may be suitable
More informationconcrete Apolo MEA Befestigungssysteme GmbH Industriestraße Aichach DEUTSCHLAND Apolo MEA Befestigungssysteme GmbH, Plant2 Germany
European Technical Assessment ETA-09/0373 of 1 June 2018 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationChannel & Bolt Fixings
CI/SfB X 6 January 006 series/0. 4.0 Channel & Bolt Fixings Ties & Restraint s Masonry Support Systems Lintels Channel & Bolt Fixings Windpost s Reinforcement Flooring Systems 4.0 CHANNEL & BOLT FIXINGS
More informationProducts for fixing to Steelwork and Decking
Products 8.0 Beam Clamp - Single Support 8.1 Universal Joint for any variable Angle Adjustment 8.2 Beam Clamp TCS for Header Rails 8.3 Beam Clip for Cross Support/ Dimensioning of Bolts 8.4 Beam Clip for
More informationMKDSN 1,5/ 4-5,08. Extract from the online catalog. Order No.:
Extract from the online catalog MKDSN 1,5/ 4-5,08 Order No.: 1729144 The figure shows a 10-position version of the product PC terminal block, Nominal current: 13.5 A, Nom. voltage: 250 V, Pitch: 5.08 mm,
More informationULTRA SPACE SAVER Installation Instructions
Installation Instructions The Ultra Space Saver has several steps for installation. Note that the single and double sided setups and parts are different. Make sure you follow the instructions according
More informationFosroc International Limited Drayton Manor Business Park Coles Road TAMWORTH STAFFORDSHIRE; B78 3XN GROSSBRITANNIEN EAD
European Technical Assessment ETA-18/0586 of 12 July 2018 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationNotes. Modifications and constructional corrections arising particularly from technological development excepted.
Notes Our service staff and application en gineers will be pleased to offer you their assistance to answer your questions or to work out in cooperation with you specific solutions with the aid of our own
More informationFASTENERS C O M P AT I B L E W I T H F E R O T I E S Y S T E M S. Which FERO Tie Systems Require Fasteners?
FASTENERS C O M P AT I B L E W I T H F E R O T I E S Y S T E M S Which FERO Tie Systems Require Fasteners? Structural Actions: Fastener,, or Both? With the exception of FERO tie systems that are directly
More informationDowntown Rack. Custom logo option available
Custom logo option available Downtown Rack The Downtown Rack uses thick, square-tube construction that can t be cut with a pipe cutter. The extended width of the Downtown Rack makes for easy bike parking
More informationDesign Guide Pryda Connectors for Steel Framing
Pryda Connectors for Steel Framing Copyright: (c) Pryda Australia A Division of ITW Australia November 2012 November 2012 Design Guide Pryda Connectors for Steel Framing INDEX General Notes General information
More informationMKKDSH 3/ 2. Extract from the online catalog. Order No.:
Extract from the online catalog MKKDSH 3/ 2 Order No.: 1721045 The illustration shows a 2-position version PC terminal block, Nominal current: 24 A, Nom. voltage: 250 V, Pitch: 5 mm, Number of positions:
More informationMEFA mounting accessories
MEFA mounting accessories Mounting accessories Base plates Page 5/2 Double holder Page 5/4 Height-adjustable suspensions Page 5/5 Pendular bolt joints Page 5/6 Trapeze hanger Page 5/7 Threaded hooks, distance
More informationSwerve Rack CUSTOM RACKS AVAILABLE
CUSTOM RACKS AVAILABLE Swerve Rack The design of the Swerve mirrors the bike frame, thus providing superior bike support while making it easy to secure both the bike frame and wheel with a standard u-lock.
More informationHang-TITE Rod Hanger Screws
Description The Hang-TITE Rod Hanger Screw is a one-piece, internally threaded anchor designed for suspending threaded rod for applications like cable-tray, pipe hanging, fire protection, and electrical
More informationEuropean Technical Assessment. ETA-18/0861 of 12 November English translation prepared by DIBt - Original version in German language
European Technical Assessment ETA-18/0861 of 12 November 2018 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationEuropean Technical Assessment ETA-17/1005 of
ETA-Danmark A/S Göteborg Plads 1 DK-2150 Nordhavn Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011
More informationCIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD METAL SCREWS. 6 x 3/4 P/N x 1 METAL SCREW P/N x 3/4 METAL SCREW
A21-1 1160 CIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD S For light duty applications in solid materials Color coded diameters for easy identifi cation Acid resistant NYLON FLANGED:
More informationWall Mounting Bracket
OWNER S MANUAL Wall Mounting Bracket Please read this manual carefully before operating your set and retain it for future reference. LSW100B LSW100BG P/NO : MFL63640503 (1101-REV03) www.lg.com * 1 Year
More informationFIXED MOUNTING SHUTTERS INSTALLATION
FIXED MOUNT APPLICATIONS The following components are included for Fixed Mount Applications. (4) Polycarbonate mounting brackets (slotted) (8) #10 x ¾ Stainless Steel Mounting Screws (1) 0.5 oz. Tube All-Weather
More informationSMKDS 2,5/ 2-5,08. Extract from the online catalog. Order No.:
Extract from the online catalog SMKDS 2,5/ 2-5,08 Order No.: 1705469 The illustration shows the 3-position version. PC terminal block, Nominal current: 20 A, Nom. voltage: 250 V, Pitch: 5.08 mm, Number
More informationKlaus-Fischer-Straße Waldachtal DEUTSCHLAND EAD This version replaces ETA-07/0025 issued on 14 May 2018
European Technical Assessment ETA-07/0025 of 28 August 2018 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationWall mounting bracket
Install Manual Wall mounting bracket Please read this manual carefully before operating your set and retain it for future reference. OSW200 P/NO : MFL63640578 (1502-REV01) www.lg.com COMPONENT Install
More informationfischer NEW The installation-friendly nylon toggle plug for high loads in gypsum plasterboard.
fischer DUOtec NEW The installation-friendly nylon toggle plug for high loads in gypsum plasterboard. fischer DUOTEC. The intelligent combination for high loads in gypsum plasterboard. Due to its unique
More informationEuropean Technical Assessment ETA 15/0029 of 12/06/2017
RISE Research Institutes of Sweden AB RISE Certifiering Box 553 SE-371 23 Karlskrona Sweden Member of www.eota.eu Tel: +46 10 516 63 00 Web: www.ri.se Mail: certifiering@ri.se European of 12/06/2017 General
More informationTensile strength of ASSY plus VG screws wood-wood (softwood)
Tensile strength of ASSY plus VG screws wood-wood (softwood) STRENGTHENS THE WOOD - INSTEAD OF SPLITTING IT 23.05.2017 Table of contents for tensile strength Determining the tensile strength - Table values
More informationVerbindungselemente Engel GmbH Weltestraße Weingarten DEUTSCHLAND. Manufacturing plant 74437, , ,
European Technical Assessment ETA-13/0536 of 20 February 2018 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationEuropean Technical Approval ETA-12/0114
ETA-Danmark A/S Kollegievej 6 DK-2920 Charlottenlund Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 10 of the Council Directive 89/106/EEC
More informationMoment Resisting Connections for Load Bearing Walls
PRECAST: MOMENT RESISTING CONNECTIONS Moment Resisting Connections for Load Bearing Walls Manish Khandelwal Sr. Structural Engineer, Building Structures, Sweco India Private Limited Design philosophy for
More informationEuropean Technical Assessment ETA-13/0029 of 11/07/2017
ETA-Danmark A/S Göteborg Plads 1 DK-2150 Nordhavn Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011
More informationALLIGATOR All-Purpose Anchors
ALLIGATOR All-Purpose s Description ALLIGATOR anchors are designed to hold high loads in solid walls, ceilings, and floors... but also hold securely when they encounter an unexpected cavity, such as in
More informationFRONT 2,5-H/SA 5. Extract from the online catalog. Order No.:
Extract from the online catalog FRONT 2,5-H/SA 5 Order No.: 1700008 PC terminal block, Nominal current: 24 A, Nom. voltage: 250 V, Pitch: 5 mm, Number of positions: 1, Type of connection: Screw connection,
More informationShear force transmission in expansion joints
for better solutions Shear dowel Shear force transmission in expansion joints Reliable expansion joint dowelling in concrete structural elements General Single shear dowel HED Expansion joint dowelling
More informationb) It is assumed a suitably qualified electrical installer will make all electrical connections.
Installation Instructions for the Multi SmartBox Please read thoroughly before beginning the installation. Notes a) Proficient DIY skills are assumed. b) It is assumed a suitably qualified electrical installer
More informationHilti HIT-RE 500 V3 mortar with rebar (as post-installed connection)
Hilti HIT-RE 500 V3 mortar with rebar (as post-installed connection) Injection mortar system Benefits Hilti HIT-RE 500 V3 330 ml foil pack (also available as 500 ml and 1400 ml foil pack) Statik mixer
More informationTechnical Data February, 2016
Technical Data February, 2016 Product Description 3M DP-600 is a non-sag, grey, rapid setting, two-component polyurethane. It is packaged as 1:1 ratio liquids in a duo-pak cartridge. With the squeeze of
More informationStatement for nail plate LL13 Combi
STATEMENT NO VTT-S-0369-17 1 (5) Request by Order Contact person Ristek Oy Askonkatu 11 FI-15110 Lahti 15.3.017 Kimmo Köntti VTT Expert Services Ltd Ari Kevarinmäki P.O. Box 1001, FI-0044 VTT Tel. +358
More information