X-HS Threaded Hanger and X-CC Loop Hanger Systems
|
|
- Mark Johnathan Tucker
- 6 years ago
- Views:
Transcription
1 5, Threaded Hanger and oop Hanger Systems Product data Dimensions DKH À U Á U Â M o o 15 HITI o 4 S dg 2 D o o DKH 48 P8S15 o8 o4 o15 X-U _ P8 Ø 8 Ø 4 DKH 48 Â CS S X-CS _ P8 HITI d S 1.5 S eneral information Material specifications Carbon steel shank: HRC 58 M _ DKH, M/W_U, _U HRC 56 _CS : Zinc coating: 10 μm U: Zinc coating: 2.5 μm CS : Zinc coating: 5 μm X-U / DKH ail: Zinc coating: 5 μm X-CS ail: Zinc coating: 5 μm Recommended fastening tools DX 460-F8, DX 351-F8, DX 36, DX 2, DX E72 See and fastener program in the next pages and Tools and equipment chapter for more details. 12 /
2 , Approvals SOCOTEC (France): / with X-DKH loyds Register: ICC, U, FM: W6/10 ote: technical data presented in these approvals and design guidelines reflect specific local conditions and may differ from those published in this handbook. Applications Examples Threaded rod attachments to concrete and steel oad data Recommended loads Concrete (DX-Kwik with pre-drilling) or steel Fastener rec = V rec Base designation [k] material Wire attachments to concrete and steel DKH Concrete U Steel DKH Concrete U Steel Conditions: Predominantly static loading. Concrete C/25 C50/60 Strength of fastened material is not limiting. Observance of all application limitations and recommendations (especially predrilling requirements). V V / 13
3 , Concrete (DX Standard without pre-drilling) Fastener designation rec [k] V rec [k] h ET [mm] _U _U _U _U27 0.2* _U * CS CS *) eccentric loading considered Conditions: Minimum 5 fastenings per fastened unit (normal weight concrete). All visible failures must be replaced. With lightweight concrete base material and appropriate washers, greater loading may be possible, please contact Hilti. V Predominantly static loading. Observance of all application limitations and recommendations. Application requirements V Thickness of base material Concrete DX-Kwik (with pre-drilling) h min = 100 mm DX Standard (w/o pre-drilling) h min = 80 mm Steel t Il 4 mm Spacing and edge distances Minimum spacing and edge distances: See corresponding nail data sheet of X-U and X-DKH. Corrosion information These zinc-coated fasteners are not suitable for long-term service outdoors or in otherwise corrosive environments. For further detailed information on corrosion see relevant chapter in Direct Fastening Principles and Technique section. 12 /
4 , Application limits Fastening to steel U19 with DX351 Steel thickness, tii [mm] S235 S275 S Steel strength, R m [/mm 2 ] Fastener selection Program, technical information Fastener Shank Shank Ø length ds s Base material Designation [mm] [mm] [mm] Tools À Concrete pre-drilled _ DKH 48 P8S DX 460-F8 Á Concrete _ U 32 P8S DX 460-F8, _ U 27 P8S DX 351-F8, _ U 22 P8S DX 36, DX 2 Steel _ U 19 P8S Â Concrete pre-drilled DKH 48 P8S DX 460-F8 Â Concrete U 27 P DX 460-F8, U 22 P DX 351-F8, Steel U 16 P DX 36, DX 2 Type of threading: M = metric; W6, W10 = Whitworth 1/4 ; 3/ / 13
5 , order information Item no. Designation Item no. Designation M6 U32 P8 S M8 U19 P8 S M6 U27 P8 S M10 U19 P8 S M8 U32 P8 S W10 U19 P8 S M8 U27 P8 S M6 U22 P8 S M10 U32 P8 S M8 U22 P8 S M10 U27 P8 S W10 U22 P8 S W6 U27 P8 S W6 U19 P8 S W10 U27 P8 S M10 U22 P8 S M6 U19 P8 S W6 U22 P8 S15 Type of threading: M = metric; W6, W10 = Whitworth 1/4 ; 3/8 order information Item no. Designation U22 P U27 P DKH P8 S U16 P CS22 P CS27 P8 Cartridge selection Cartridge recommendation: Steel: 6.8/11M red cartridge t ll 6 mm 6.8/11M green cartridge t ll < 6 mm Concrete: 6.8/11M yellow cartridge on green/fresh and standard concrete 6.8/11M red cartridge on precast, old and hard concrete Tool energy adjustment by setting tests on site. 12 /
6 , Fastening quality assurance Installation o Attach the threaded rod to the before fastening 2. For DKH 48 pre-drill ( 5 x 23) 3. oad the assembly into the tool 4. ocate the nail, compress the tool, pull the trigger and the fastening is complete 5. Bend the assembly down to the vertical position o Assemble the wire with the 2. For DKH 48 pre-drill ( 5 x 23) 3. oad the assembly into the tool 4. ocate the nail, compress the tool, pull the trigger and the fastening is complete 5. Adjust the wire as required Quality assurance hvs hvs h VS = 6 10 mm h VS = 4 7 mm These are abbreviated instructions which may vary by application. AWAYS review/follow the instructions accompanying the product / 13
X-EKB, X-ECH Electrical Cable Fasteners
X-EKB, X-ECH Electrical Cable Fasteners Product data Dimensions Single Fastener X-EKB 8/4-FR X-EKB 16 (FR) X-U 37 PH 1 2 4 o8.15 16.8 10 21.5 34 136/104 16.8 10 25 229 o3.7 37 49 o11.8 X-ECH-S (FR) X-ECH-M
More informationX-ECT MX Electrical Cable Tie, X-EKS MX and X-EMTSC Conduit Clip Fastener
D X-ECTMX, X-EKSMX, X-ECT MX Electrical Cable Tie, X-EKS MX and Conduit Clip Fastener Product data Dimensions X-ECT MX X-EKS MX X-EKSC MX 18 X-GHP 20 X-GN 27 X-EGN 14 X-U 16/22/27 4 12.5 24.5 19 24.9 14
More informationX-P High Performance Nail for Fastening to Concrete and Wood to Steel applications
X-P High Performance Nail for Fastening to Concrete and Wood to Steel applications Product data X-P_ MX Ø 8.2 2.4 X-P_ P8 Ø 8.2 2.4 Ø 4.0 L s L L s L Ø 4.0 Features and Benefits A specially hardened fastener
More informationX-EKB, X-ECH Electrical Cable Fasteners
X-EKB, X-ECH Electrical Cable Fasteners Product data Dimensions Single Fastener X-EKB 8/4-FR X-EKB 16 (FR) X-U 37 PH 1 2 4 o 8.15 16.8 10 21.5 34 136/104 16.8 10 25 229.7 37 49 o 11.8 X-ECH-S (FR) X-ECH-M
More informationHilti, Inc South 122 nd East Avenue Tulsa, OK
Attached are page(s) from the 2013 Hilti North American Product Technical Guide Volume 1 Direct Fastening. For complete details on this product, including data development, product specifications, general
More informationUsing Hilti powderactuated. to install suspended metal-framed gypsum board ceilings. The application. Selection of fasteners.
Using Hilti powderactuated fasteners to install suspended metal-framed gypsum board ceilings The application Selection of fasteners Technical data Procedures Fastening quality 0 Using powder-actuated fasteners
More informationBX 3 system: fasteners for Mechanical & Electrical and Interior Finishing applications
BX 3 system: fasteners for Mechanical & Electrical and Interior Finishing applications Product data BX 3 battery-actuated fastening tool Nails (For fastening to concrete) X-P 17/20/24 B3 MX X-P 30/36 B3
More informationDX-Kwik X-M6H, X-M8H Threaded Studs and DNH, X-DKH Nails
X-M6H, X-M8H Threaded Studs and DNH, X-DKH Nails Produt data Dimensions General information X-M6H- -37 FP8 Material speifiations M6 o 3.7 Carbon steel shank: HRC 58 g 37 Zin oating: 5 20 μm Reommended
More informationBX 3 system: fasteners for Mechanical & Electrical and Interior Finishing applications
BX 3 system BX 3 system: fasteners for Mechanical & Electrical and Interior Finishing applications Product data Nails X-C: o 6.5 X-P: o 6.8 (For fastening to concrete) X-P 17/20/24 B3 MX X-P 30/36 B3 P7
More informationFastener selection guide. Concrete fastener selection Selecting the right nail for concrete What determines nail performance
Concrete fastener selection Selecting the right nail for concrete What determines nail performance Hilti Direct Fastening systems are designed to achieve maximum performance in a wide range of applications.
More informationS-BT screw-in stainless steel and carbon steel threaded studs
S-BT screw-in stainless steel and carbon steel threaded studs Product data Dimensions S-BT-MR M10/15 SN 6 S-BT-MR M10/15 SN 6 AL**) S-BT-MR W10/15 SN 6 S-BT-MR W10/15 SN 6 AL**) S-BT-MR M10/15 SN 5 ***)
More informationBX 3 system: fasteners for Interior Finishing, Mechanical and Electrical and Building Construction applications
Product data BX 3 system BX 3 system: fasteners for Interior Finishing, Mechanical and Electrical and Building Construction applications BX 3 battery-actuated direct fastening tools BX 3-ME BX 3-IF Fasteners
More informationGovernment Letters Job Reference 18 21
Hilti X-CR Nail Product Information 2 6 X-CR Nails DX 460 Tool DX 36 Tool Technical data 7-11 Government Letters 12 16 Country of Origin 17 Job Reference 18 21 Make your submission simple! To download
More informationMaterial Specifications Technical Data
3.4.3.1 Product 3.4.3.2 Material Speciications 3.4.3.3 Technical Data 3.4.3.4 Installation Instructions 3.4.3.5 Ordering Information 3.4.3.1 Product Hilti provides a wide range of solutions for the attachment
More informationHilti, Inc South 122 nd East Avenue Tulsa, OK
Attached are page(s) from the 2013 Hilti North American Product Technical Guide Volume 1 Direct Fastening. For complete details on this product, including data development, product specifications, general
More informationThe following excerpt are pages from the North American Product Technical Guide, Volume 1: Direct Fastening, Edition 15.
The following excerpt are pages from the North American Product Technical Guide, Volume 1: Direct Fastening, Edition 15. Please refer to the publication in its entirety for complete details on this product
More informationSpecifications - Common Nails Diamond point, Flat head, round smooth shank, Bright, HDG, EG or cement coated (resin or vinyl) finish
Specifications - Common Nails Diamond point, Flat head, round smooth shank, Bright, HDG, EG or cement coated (resin or vinyl) finish ASTM F 1667-05 Table 15 Type 1, Style 10 - Common Nails Size Length
More informationHilti X-BT Threaded Fastener Specification. Supplement 02/2012. X-BT threaded fasteners for use in nuclear power plants
Hilti X-BT Threaded Fastener Specification Operating instructions: DX 450-SCT Supplement 02/2012 X-BT threaded fasteners for use in nuclear power plants February 2012, revised August 2012 Early strength
More informationTrusted ICC ES. Issued 06/2018 HILTI, INC. Evaluation. report, or as to any. ICC-ES Evaluation
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.orgg ESR 4185 Issued 06/2018 This report is subject to renewal 06/2019. SECTION: 05 05 23
More informationLetter of Transmittal/Submittal
Letter of Transmittal/Submittal FROM: TO: Baker Concrete Construction 1904 Jasper Street DATE JOB NUMBER 09/23/10 Aurora, CO 80011 9921 303.367.8111 ATTENTION Nick Dewald 937.536.9000 RE: Bruce Herman
More informationLateral Support. Decks over 24 above grade require lateral support* *Exceptions to be discussed later
Lateral Support Decks over 24 above grade require lateral support* *Exceptions to be discussed later Decking Types of Decking: -2x4s & 2x6s -five quarter span rated decking boards -Wood plastic composite
More informationDrive Pins. Powder Actuated Systems. Powder Actuated Systems
Standard Drive Pins for Concrete, Masonry and Steel Drive Pins designed for fastening to standard strength concrete, masonry and steel up to a maximum of 8mm. Part No Drive Pin Length (thickness to steel)
More informationDIRECT FASTENING SYSTEMS. Hilti. Outperform. Outlast.
DIRECT FASTENING SYSTEMS. Hilti. Outperform. Outlast. Powder-Actuated Tools and Fasteners DX - Light Tools DX 460-F8 Page 140 DX 460 MX Page 141 Consumables X-U, X-C, X-FS, X-HS U, X-M, X-EM Page 142 Insulation
More informationHUS 6 Screw anchor, Redundant fastening
HUS 6 Screw anchor, Anchor version HUS-A 6 Carbon steel Concrete Screw with hex head HUS-H 6 Carbon steel Concrete Screw with hex head HUS-I 6 Carbon steel Concrete Screw with hex head Benefits - Quick
More informationDIRECT FASTENING TECHNOLOGY MANUAL 2018
DIRECT FASTENING TECHNOLOGY MANUAL 2018 Hilti Corporation 9494 Schaan, Liechtenstein P +423-234 2965 www.facebook.com/hiltigroup www.hilti.group Contents Contents Hilti Direct Fastening System Part 1:
More informationFASTENERS & ACCESSORIES
Staples General purpose staples to suit most popular staple guns. Particularly useful for stapling external angles and PVC mouldings to timber frames. PlasterX staples are designed to fit PLASTERX Arrow
More informationEuropean Technical Assessment. ETA-14/0426 of 21 December English translation prepared by DIBt - Original version in German language
European Technical Assessment ETA-14/0426 of 21 December 2016 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationPlease direct powder-actuated and screw fastening technical inquiries to your local Hilti Field Engineer or Technical Support at
Section 3.1.2.8 Screws should only be used in non-corrosive applications, regardless of their coating, unless they are specifically listed as being suitable for outdoor or exposed conditions. More detailed
More informationHilti HIT-1 / HIT-1 CE Adhesive Anchor System
Concrete Hilti HIT-1 / HIT-1 CE Adhesive Anchor System Injection mortar system Benefits Hilti HIT-1 / HIT-1 CE 300 ml foil tube cartridge Mixer HIT PM HIT-V rods Dispenser: - chemical injection fastening
More informationEuropean Technical Assessment. ETA-14/0426 of 15 December English translation prepared by DIBt - Original version in German language
European Technical Assessment ETA-14/0426 of 15 December 2014 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationTYPICAL STANDOFF GLASS RAIL ELEVATION TYPICAL SECTION RS0B20 WITH RECTANGULAR BACK PLATE TYPICAL STAIRS
Revisions By: CRL SRS STANDOFF RAILING SYSTEM CRL GLASS RAIL S RS0B20 w/ RECTANGULAR BACK PLATE CRL'S GLASS RAIL S CAN BE USED FOR MOUNTING GLASS PANELS UP TO 3/4" (19 MM) IN THICKNESS. THE 4" X 8" (102
More informationChemical composition. Type 2 as per F568: C ( ); P (max 0.048); S (max 0.058); Mn (min 0.74); B (min );
BS EN 14399 HIGH STRENGTH STRUCTURAL BOLTING FOR PRE LOAD Direct comparison as an alternative to ASTM HSFG Bolts ASTM A325M Type 1, ASTM A490M Type 1 or 2 BS EN 14399-3:2005 Grade 8.8 and 10.9 Chemical
More informationDIVISION: METALS SECTION: METAL FASTENINGS REPORT HOLDER: ELCO CONSTRUCTION PRODUCTS 1032 KERR DRIVE DECORAH, IOWA 52101
0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-87 (2) 99-043 www.icc-es.org ESR-3332 Reissued 09/207 This report is subject to renewal 09/208. DIVISION: 0 00 00 METALS
More informationLarge Diameter Tapcon
CONCRETE ANCHORING SPECIALISTS Large Diameter Tapcon (LDT ) Anchors Finished head, Removable Anchor DESCRIPTION/SUGGESTED SPECIFICATIONS Self-threading Anchors SPECIFIED FOR ANCHORAGE INTO CONCRETE The
More informationPURE 150-PRO EPOXY ADHESIVE ANCHOR
ONLINE ANCHOR DESIGN SOFTWARE PURE 150-PRO EPOXY ADHESIVE ANCHOR Fully featured and easy to use interface Easy 5 step anchor design with 3D modelling of fastening Professional specification of DEWALT fastenings
More informationProduct Submittal/Substitution Request
Product Submittal/Substitution Request TO: PROJECT: PROJECT LOCATION: SPECIFIE ITEM: Section Page Paragraph escription PROUCT SUBMIT TAL / SUBSTITUTION REQUESTE: The attached submittal package includes
More informationHUS3 redundant SCREW ANCHOR. Technical Datasheet Update: Dec-17
HUS3 redundant SCREW ANCHOR Technical Datasheet Update: Dec-17 HUS3 Screw anchor Ultimate performance screw anchor for redundant fastening applications Anchor version HUS3-H (R) HUS3-C HUS3-A Benefits
More informationHang-TITE Rod Hanger Screws
Description The Hang-TITE Rod Hanger Screw is a one-piece, internally threaded anchor designed for suspending threaded rod for applications like cable-tray, pipe hanging, fire protection, and electrical
More informationTel / (USA & CANADA) /
Tel.58.847 / 8.388.459 (USA & CANADA) / Email sales@msdiscounttool.com MULTIPURPOSE CLAMPS - USA SERIES 7: Lightweight and 4% stronger than C clamps. Floating jaws that always stay parallel. Designed to
More informationFastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength
Fastener Basics Common Fastener Types Fastener Grade (US) or Class (metric) refers to the mechanical properties of the fastener material. Generally, a higher number indicates a stronger, more hardened
More informationMULE-HIDE PRODUCTS CO., INC FASTENER GUIDELINES
FASTENER GUIDELINES Fastener Overview A. Mule-Hide offers a variety of fasteners and plates to: Attach roof insulation Attach mechanically fastened roofing membranes Secure All Purpose Bar and termination
More informationTI: Efficient self tapping fasteners into concrete without plugs
TI: Efficient self tapping fasteners into concrete without plugs Application specific fastener solutions for use either with solid or pre-cast concrete substrates are highly sought after. Indeed, some
More informationFastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength
Fastener Basics Common Fastener Types Fastener Grade (US) or Class (metric) refers to the mechanical properties of the fastener material. Generally, a higher number indicates a stronger, more hardened
More informationBarofor Round System (polyester coated) Panels, Posts, Accessories
1 Scope This Technical Data Sheet specifies the requirements for the Barofor Round System. The complete system exists of: Panels Posts Accessories such as fixation system and posts caps. Panels and posts
More informationSECTION CONCRETE ANCHORING. Display hidden notes to specifier. (Don't know how? Click Here)
PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 03 15 00 CONCRETE ANCHORING Display hidden notes to specifier. (Don't know how? Click Here) A. General purpose mechanical anchors for horizontal and vertical
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
MULTIPURPOSE CLAMPS - USA SERIES 7: Lightweight and 4% stronger than C clamps. Floating jaws that always stay parallel. Designed to eliminate distorting or twisting action. Cantilever action provides 4:
More informationT3ss Gas Powered Tool
T3ss Gas Powered Tool Gas Technology Single Pin Gas Tool Fuel Injection Cross Over Technology /SUGGESTED SPECIFICATIONS Crossing Over from Powder to Gas THE PREMIER FASTENING SYSTEM FOR THE ELECTRICAL
More informationSturdi-Wall Design Manual for SW46, SW66, SW63, SW64, SW60, SW83, SW84, and SW80 Models
Sturdi-Wall Design Manual for SW46, SW66, SW63, SW64, SW60, SW83, SW84, and SW80 Models Project Number ME086-05 by Brent Leatherman, P.E. Timber Tech Engineering, Inc E-Mail: bl@timbertecheng.com January
More information4isofast Product code Page
Fasteners, stress plates and plastic sleeves isofast Product code Page Carbon steel DT.3 Austenitic stainless steel S.6 Carbon steel TI.11 Drill bits SDS.13 isotak Product code Page Carbon steel Austenitic
More informationICC-ES Evaluation Report
ICC-ES Evaluation Report ESR-6 Reissued April, 009 This report is subject to re-examination in two years. www.icc-es.org (800) 4-6587 (56) 699-054 A Subsidiary of the International Code Council DIVISION:
More informationSDWH TIMBER-HEX Screw
Simpson Strong-Tie Fastening Systems Structural Wood-to-Wood Connections, Including Ledgers Double-barrier coating provides corrosion resistance equivalent to hot-dip galvanization, making it suitable
More informationD. Thermally Sprayed Metallic Coating (Flame Spray): STD SPEC
STANDARD SPECIFICATION SECTION 05121 MISCELLANEOUS METALWORK PART 1 - GENERAL 1.01 DESCRIPTION This section includes materials, fabrication, and installation of structural steel, connecting bolts, pipes,
More informationSD Screw #10x2½" 16dx2½" SD Screw #9x2½" SD Screw 10dx1½" 8d Common N54A 0.25" 0.131"
DESIGNED FOR FASTENER TYPES Fastener Types and s Specified for Simpson Strong-Tie Connectors Many Simpson Strong-Tie connectors have been designed and tested for use with specific types and sizes of fasteners.
More informationThread protection accessories are installed at the MODIX production factory and delivered with couplers.
Installation of MODIX Rebar Coupler Identification of the product The type of MODIX Rebar Coupler can be identified by the marking on the product. Size of the Coupler can be identified also according to
More informationFaçade Solution. Produces façade & cassette solutions
Façade Solution Façade Solution Produces façade & cassette solutions The company produces facade solutions using its cutting edge Qatari manufacturing facility. All facades are manufactured & delivered
More informationSECTION MASONRY ANCHORAGE AND REINFORCEMENT. Display hidden notes to specifier. (Don't know how? Click Here)
PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 04080 MASONRY ANCHORAGE AND REINFORCEMENT Display hidden notes to specifier. (Don't know how? Click Here) A. Post installed masonry anchors. B. Miscellaneous
More informationFace Mount to Through-the-Post Mount
Face Mount to Through-the- Mount Cable Runs through Two Corners When going around two corners, it s necessary to tension the cable from both ends as shown in Deck 4. Use the 672 series The tensioning devices
More informationMETRIC FASTENERS 1520 METRIC FASTENERS
1520 METRIC FASTENERS METRIC FASTENERS A number of American National Standards covering metric bolts, screws, nuts, and washers have been established in cooperation with the Department of Defense in such
More informationBaltic State Price-list Concrete & Timber Work fasteners
Baltic State 2017.11 Price-list Concrete & Timber Work fasteners Fast and easy installation High security level No time-waste, the anchor carrying loads immediately Removable Approved products 2 Installation
More informationUltraCon Masonry Fasteners High Performance in a Wide Range of Applications
UltraCon Masonry Fasteners High Performance in a Wide Range of Applications The UltraCon masonry fastening system from Elco Construction Products offers optimal performance in a wide range of masonry applications.
More informationDrywall Applications. Electrical and Mechanical Fastenings
DIRECT FASTENING Drywall Applications Battery-actuated fastening tool GX 3 Page 179 Collated nail X-C G3 MX Page 179 Collated nail X-P G3X Page 180 Collated nail X-PN G3 MX Page 180 Collated nail X-GN
More informationMEFA mounting accessories
MEFA mounting accessories Mounting accessories Base plates Page 5/2 Double holder Page 5/4 Height-adjustable suspensions Page 5/5 Pendular bolt joints Page 5/6 Trapeze hanger Page 5/7 Threaded hooks, distance
More informationEuropean Technical Approval ETA-10/0413
ETA-Danmark A/S Kollegievej 6 DK-2920 Charlottenlund Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 10 of the Council Directive 89/106/EEC
More informationDYNABOLT PLUS ANCHORS DYNABOLT PLUS. Anchor Details. Installation Ramset Regions. Site Map. Home Page. Performance. Next Page. Date of Issue: 9/98
Date of Issue: 9/9 Dynabolt Plus is a general purpose all steel medium duty through fixing for masonry and concrete. For fixing to Concrete, solid and hollow brick, masonry, natural stone. Surface Finish
More informationSWAY BRACE PIPE ATTACHMENT FIG. 010
Function: Designed for bracing pipe against sway and seismic disturbance. The pipe attachment component of a sway brace system used in conjunction with a PHD Manufacturing structural attachment fitting,
More informationHK I. Anchor size (carbon steel) HK6 HK6L HK8 Resistance F Rk [kn] 2,0 5,0 5,0
HK HK I Anchor version Benefits - well proven - small drill bit diameter - for fixing in cracked concrete, redundant fastening only, e.g. suspended ceilings a ) Redundant fastening only Approvals / certificates
More informationHilti, Inc. November Dallas Parkway, Suite 1000 Plano, Texas Toll Free Website Guide Specification
Hilti, Inc. November 2015 7250 Dallas Parkway, Suite 1000 Plano, Texas 75024 Toll Free 800-879-8000 Website www.us.hilti.com Guide Specification Specifier Notes: This guide specification is written in
More informationAttachment of Residential Deck Ledger to Side of Metal Plate Connected Wood Truss Floor Ladder. Installation Instructions Revised 9/2/2016
Attachment of Residential Deck Ledger to Side of Metal Plate Connected Wood Truss Floor Ladder Installation Instructions Revised 9/2/2016 SBCA has been the voice of the structural building components industry
More informationDIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: WOOD, PLASTIC, AND COMPOSITE FASTENINGS REPORT HOLDER:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 42 687 (62) 699 04 www.icc es.org ESR 2442 Reissued 0/208 This report is subject to renewal 0/209. DIVISION: 06 00 00 WOOD,
More informationHPD Aerated concrete anchor. Approvals / certificates. Basic loading data (for a single anchor)
HPD Anchor version HPD Benefits - anchor for autoclaved aerated concrete - maximum use of base material capacity - setting without drilling Autoclaved aerated concrete Fire resistance Sprinkler approved
More informationMulti-Set II Drop-In Anchors
CONCRETE ANCHORING SPECIALISTS Internally Threaded Heavy- Duty Anchoring Systems DESCRIPTION/SUGGESTED SPECIFICATIONS Drop-In, Shell-Type Anchors SPECIFIED FOR ANCHORAGE INTO CONCRETE Drop-In, shell-type
More informationWash basin and urinal fixings Complete fixing sets.
123 Wash basin and urinal fixings... page 124 WC and sanitary fixings... page 127 Accessories for sanitary fixings... page 129 WC fixing WB... page 131 On wall installation... page 132 124 SANITARY FIXINGS
More informationHilti HIT-HY 200 with HIT-Z
Hilti Injection Mortar System Benefits Hilti -R 500 ml foil pack (also available as 330 ml foil pack) Static mixer no cleaning required: zero succeptability to borehole cleaning conditions with dry and
More informationKS SERIES - VERTICAL INSTALLATION
CS-DS-01-KSV CS DISCLAIMER CS-PJ-01-KSV KS42SL EXPANDED PANEL JOINT CS-PJ-02-KSV KS42SL ENGAGED PANEL JOINT CS-PJ-03-KSV KS45SL EXPANDED PANEL JOINT CS-PJ-04-KSV KS45 FLAT ENGAGED PANEL JOINT CS-PJ-05-KSV
More informationDIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: WOOD, PLASTIC, AND COMPOSITE FASTENINGS REPORT HOLDER:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 2442 Reissued 10/2017 This report is subject to renewal 10/2018. DIVISION: 06 00
More informationPowder Actuated Fasteners - Drive Pins
122 Drive Pins Standard Pins Drive pins with a.300 diameter head are designed for permanently fastening a fixture to concrete, some types of masonry and A36 structural steel. Drive pins are manufactured
More informationREPORT HOLDER: DEWALT 701 EAST JOPPA ROAD TOWSON, MARYLAND EVALUATION SUBJECT:
0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-2024 Reissued 09/2017 This report is subject to renewal 09/2018. DIVISION: 03 00
More informationPowder Actuated Fastening INTRODUCTION
Powder Actuated Fastening INTRODUCTION Powder actuated fastening systems provide a cost effective method of attaching fixtures for light duty, static load conditions. Powers' systems consist of specially
More informationESR-2024* Reissued September 1, 2011 This report is subject to renewal September 1, 2013.
ICC-ES Evaluation Report ESR-2024* Reissued September, 20 This report is subject to renewal September, 20. www.icc-es.org (800) 42-68 (62) 699-04 A Subsidiary of the International Code Council DIVISION:
More informationREPORT HOLDER: HILTI, INC DALLAS PARKWAY, SUITE 1000 PLANO, TEXAS EVALUATION SUBJECT: HILTI SELF-DRILLING AND SELF-PIERCING SCREWS
0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-2196 Reissued 10/2017 This report is subject to renewal 10/2019. DIVISION: 05 00
More informationMulti-Institutional Academic Health Science & Research Center Evansville, IN
SECTION 06 1053 - MISCELLANEOUS ROUGH CARPENTRY PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Division 01 Specification
More informationUltraCon Masonry Fasteners High Performance in a Wide Range of Applications
UltraCon Masonry Fasteners High Performance in a Wide Range of Applications The UltraCon masonry fastening system from Elco Construction Products offers optimal performance in a wide range of masonry applications.
More informationContinuous Fastener Galvanizing
Continuous Fastener Galvanizing The Continuous Fastener Galvanizing Process The Products it can produce The Markets it will service The Economics of the process The Investment required The Future Potential
More informationHSL-3 / HSL-3-R EXPANSION ANCHOR. Technical Datasheet Update: Oct-18
HSL-3 / HSL-3-R EXPANSION ANCHOR Technical Datasheet Update: Oct-18 HSL-3 / HSL-3-R expansion anchor Ultimate-performance heavy-duty expansion anchor Anchor versions a) Condition valid only for HSL-3 carbon
More informationDIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: WOOD, PLASTIC, AND COMPOSITE FASTENINGS REPORT HOLDER:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 2761 Reissued 10/2017 This report is subject to renewal 10/2019. DIVISION: 06 00
More informationSign Holder I Mirror Clamp Distance Holder I Shelf Support
Sign Holder I irror Clamp : Distance Holder I Shelf Support : 02 Content Glass holder with flat head, mirror clamp round or angular, distance holder till diameter 55 mm, shelf supports. irror clamp S50
More informationHDA-P HDA-PR HDA-PF Anchor for presetting. HDA-T HDA-TR HDA-TF Anchor for through-fasting. Nuclear ICC. Steel failure
Anchor version Benefits HDA-P HDA-PR HDA-PF Anchor for presetting HDA-T HDA-TR HDA-TF Anchor for through-fasting suitable for non-cracked and cracked concrete C 20/25 to C 50/60 mechanical interlock (undercut)
More informationfischer Test Report Fixing Tests for Fastfloor and Hollowcore Units
fischer Test Report Fixing Tests for Fastfloor and Hollowcore Units CONTENTS. Test Parameters. January 999. July 999. March 00. Fixings Products Tested. Fischer Nylon SX Plug. Fischer FNS Nail.
More informationENGINEERED BUILDING PRODUCTS. I-Beam HANGERS. NEW Enhanced Capacity with YELLOW MiTek 40 x 3.75mm nails
ENGINEERED BUILDING PRODUCTS I-Beam HANGERS NEW Enhanced Capacity with YELLOW MiTek 40 x 3.75mm nails I - B e a m H a n g e r s - F a c e & T o p F i x e d FOR FACE AND TOP FIXING OF I-BEAMS TO BEAMS APPLICATION:
More informationUmbrella Inserts and Stubby Screens
ADHESIVE ANCHORING SPECIALISTS Umbrella Inserts and High Performance Adhesive Systems for Fastening to Hollow Base Materials DESCRIPTION/ADVANTAGES Hollow Block Fastening with A7+ Adhesive Umbrella Inserts
More information² TL Beton-StB 07 = German technical conditions for construction materials for concrete road pavements
Introduction A transverse joint frequently crossed by heavy goods traffic tends to form steps if it not perfectly doweled. This is associated with negative effects on ride comfort and driving safety as
More informationINSTALLATION SHOP DRAWINGS FOR MINNEAPOLIS, MN
MINNEAPOLIS, MN 2-0- 2-- General Notes Abbreviations Deviations from Architectural Specifications Deviations from Architectural Drawings ALUM. = ALUMINUM B.O. = BY OTHERS CONT. = CONTINUOUS. = CLEARANCE
More informationICC-ES Evaluation Report Reissued March 1, 2011 This report is subject to renewal in two years.
ICC-ES Evaluation Report www.icc-es.org (800) -68 (6) 699-0 ESR-8* Reissued March, 0 This report is subject to renewal in two years. A Subsidiary of the International Code Council DIVISION: 0 00 00 CONCRETE
More informationHSL-3 / HSL-3-R EXPANSION ANCHOR. Technical Datasheet Update: Dec-17
HSL-3 / HSL-3-R EXPANSION ANCHOR Technical Datasheet Update: Dec-17 HSL-3 / HSL-3-R expansion anchor Ultimate-performance heavy-duty expansion anchor Anchor versions a) Condition valid only for HSL-3 carbon
More informationHVU2 adhesive capsule Anchor design (ETAG 001) / Rods&Sleeves / Concrete
HVU2 adhesive capsule Anchor design (ETAG 001) / Rods&Sleeves / Concrete Anchor version Benefits HVU2 Mortar capsule Anchor rod: HAS HAS-R HAS-HCR (M8-M30) Anchor rod: HAS-E HAS-E-R HAS-E-HCR (M8-M30)
More informationCodes: INCO, INSI, INPISANIN, INPINZANI. Reference: FT INDE-en Date: 23/03/18 Revision: 7 Page: 1 of 6 IN-CO IN-HE IN-SI CHARACTERISTICS
Reference: FT -en Date: 23/03/18 Revision: 7 Page: 1 of 6 IN-CO IN-HE IN-SI INPISANIN INPINZANI CHARACTERISTICS Anchor for hollow elements as airbrick, dry wall, plaster wall, etc. Maximum load in thin
More informationESR-1271* Reissued September 1, 2013 This report is subject to renewal July 1, 2015.
ICC-ES Evaluation Report www.icc-es.org (800) 4-6587 (56) 699-054 ESR-7* Reissued September, 0 This report is subject to renewal July, 05. A Subsidiary of the International Code Council DIVISION: 05 00
More informationICC-ES Evaluation Report Reissued June 1, 2011 This report is subject to renewal in one year.
ICC-ES Evaluation Report www.icc-es.org (800) 42-658 (562) 699-054 ESR-99* Reissued June, 20 This report is subject to renewal in one year. A Subsidiary of the International Code Council DIVISION: 0 00
More informationT Pac2 standard for prevailing torque threadlocker Dri-Loc Plastic. Introduction. Contents. 1 Scope and field of application
T-26728 Pac2 standard for prevailing torque threadlocker Dri-Loc Plastic Test, material and performance specifications Introduction This standard conforms where applicable to DIN 267 part 28, DIN 267 part
More informationUmbrella Inserts and Stubby Screens
ADHESIVE ANCHORING SPECIALISTS Umbrella Inserts and Stubby Screens High Performance Adhesive Systems for Fastening to Hollow Base Materials DESCRIPTION/ADVANTAGES Hollow Block Fastening with A7 Adhesive
More information