GCN150 Gas-Actuated Concrete Nailer

Transcription

1 GCN0 Gas-Actuated Concrete Nailer The GCN0 gas-actuated concrete nailer is a portable fastening tool for attaching light-duty fixtures such as drywall track, furring strips, hat track and angle track to concrete, steel, CMU and metal deck. The GCN0 has a portable gas fuel supply that does not require electrical cords or hoses. The GCN0 sets up quickly and offers maximum productivity. With a 00 shot-per-hour capacity and a pin jam release door, the GCN0 makes fastening pins fast and easy. Additional attributes include two-step pin loading into the magazine, light and well-balanced weight, a battery indicator light and a sure-grip rubber handle pad. FEATURES: Fast: 0-pin magazine and,200-shot fuel cell for reduced loading time Easy to use: Automatic piston reset Easy open jam release door Portable: No hoses, cords, or external energy source required Convenient: Simple 2-step pin loading and open-blade guide-jam release Easy-load fuel compartment No possibility of firing with no pins when tool is down to last 2 pins in the pin magazine a "lock off" occurs Ladder hook SPECIFICATIONS: Tool dimensions: 7.", Width.2", Height." Weight: 8. lbs Magazine capacity: 2 Average number of fastens per fuel cell:,200 Average number of fastens per battery charge:,00 Average battery charge time: 2 hours Fastener type: ½" to ½".02" to.09" Key Fastening Applications: Drywall track to concrete, steel, CMU or metal deck Furring strips to concrete, steel or CMU Plywood to concrete, steel or CMU Angle track to concrete, steel or metal deck TOOL IS SOLD IN RUGGED FIXTURED TOOL BOX AND INCLUDES: 2 Batteries Charger Safety glasses Easy open jam release door C-SAS Simpson Strong-Tie Company Inc. Ear protection Operators manual Tool schematic Tool cleaning instructions Replacement Part: 82 GCN-APP02 GCN-CHG007 GCN-PPA020 Description Adaptor Charger (U.S.) Battery (U.S.)

2 GCN0 Gas-Actuated Concrete Nailer GDP Pins GDP concrete pins are designed to work with the GCN0 and GCN-MEP (with magazine attached) gas-actuated concrete nailer tools as well as with most major brand gas concrete-nailer tools. The 0-fastener patented strip is designed with break-away plastic. The pins are designed for use in A6, A72 and A992 steel, concrete and CMU block. Codes: ICC-ES ESR-28; Florida FL Drive Pins for the GCN0 () Qty. Pins / pack + Fuel Cell Packs/ Carton GDP-0KT ½,000 GDP-62KT,000 GDP-7KT ¾,000 GDP-00KT,000 GDP-2KT ¼,000 GDP-0KT ½,000 Compatible with these Tools Simpson Strong-Tie GCN-MEP, GCN-MEPMAG GCN0 Others: TF00, C GDP U.S. Patent 6006 C-SAS Simpson Strong-Tie Company Inc. Note: All installations are limited to dry, interior environments. GDP in Normal-Weight Concrete f' c 2000 psi (.8 Mpa) f' c 000 psi (20.7 Mpa) f' c 000 psi (27.6 Mpa) f' c 000 psi (. Mpa) 0.06 (.9) ¾ (76.2) (9.) (02) 2 (0.) 0 (0.) 0 (0.) 0 (0.) 0 (0.) 0 (0.). The fasteners must not be driven until the concrete has reached the designated minimum compressive strength. 2. concrete thickness must be three times the fastener embedment into the concrete.. The allowable tension values are only for the fasteners in the concrete. Members connected to the concrete must be investigated in accordance with accepted design criteria. GDP in Normal-Weight Concrete f' c 2000 psi (.8 Mpa) f' c 000 psi (20.7 Mpa) f' c 000 psi (27.6 Mpa) f' c 000 psi (. Mpa) 0.06 (.9) 2 (0.) 2 (0.) 2 (0.) 2 (0.) ¾ (9.) (76.2) (02) (0.2) 7 (0.) 7 (0.). The fasteners must not be driven until the concrete has reached the designated minimum compressive strength. 2. concrete thickness must be three times the fastener embedment into the concrete. See page for an explanation of the load table icons. The allowable shear values are only for the fasteners in the concrete. Members connected to the concrete must be investigated in accordance with accepted design criteria. 8

3 Simpson Strong-Tie Anchoring and Fastening Systems for Concrete and Masonry GCN0 Gas-Actuated Concrete Nailer GDP Tension and in Sand-Lightweight Concrete (76.2) (02) f'c 000 psi (20.7 Mpa) f'c 000 psi (20.7 Mpa) 7 (0.) (0.6) 0.06 (.9) See page for an explanation of the load table icons 0 0 ¾ (0.7) (0.62) (9.). The fasteners must not be driven until the lightweight concrete has reached the designated minimum compressive strength. 2. lightweight concrete thickness must be three times the fastener embedment into the lightweight concrete.. The allowable shear and tension values are only for the fasteners in the lightweight concrete. Members connected to the lightweight concrete must be investigated in accordance with accepted design criteria. Note: All installations are limited to dry, interior environments. GDP Tension and in Sand-Lightweight Concrete over Metal deck Thru." B Deck Thru." B Deck Thru " W Deck Thru " W Deck f'c 000 psi (20.7 Mpa) f'c 000 psi (20.7 Mpa) f'c 000 psi (20.7 Mpa) f'c 000 psi (20.7 Mpa) (0.29) 9 (0.87) 60 (0.27) 80 ¾ (20) (0.6) 0 (0.22) (2.) (02) (0.8) (.20) (0.27) (9.). The fasteners must not be driven through the steel deck and into the lightweight concrete until the lightweight concrete has reached the designated minimum compressive strength. 2. The allowable tension and shear values are only for the fasteners driven through the steel deck and into the lightweight concrete. Members connected by the fastener, driven through the steel deck and into the lightweight concrete, must be investigated in accordance with accepted design criteria.. The steel deck must have a minimum thickness of 20 gauge and a minimum yield strength of 8 ksi.. The fasteners must be installed through the steel deck and into the concrete at the lower flute. The fastener must be a minimum of " from the edge of the lower flute and inches from the end of the deck. GDP Tension and in Hollow CMU 0.06 (.9) (76.2) See page for an explanation of the load table icons. The tabulated allowable load values are for the fasteners only. Members connected to the CMU receiving elements shall be designed in accordance with the applicable code and accepted design criteria. 2. The tabulated allowable load values are for fasteners installed in hollow CMUs conforming to ASTM C 90. The minimum allowable nominal size of the CMU must be 8 inches high by 8 inches wide by 6 inches long, with a minimum, "-thick face shell thickness, lightweight concrete masonry units.. The tabulated allowable load values are for fasteners installed in the center of a hollow CMU face shell. See page for an GDP Tension and in A6 Steel " Thick 6" Thick " Thick " Thick 6" Thick " Thick ½ Thru (2.) (0.6) (0.9) (0.98) (.27) (.00) (0.9). The entire pointed portion of the fastener must penetrate through the steel to obtain the tabulated values. See Detail A.. Steel must conform to ASTM A6 specifications, with Fy = 6 ksi, minimum. GDP Tension and in A72 Grade 0 or A992 Steel Thru ½ (2.) 6" Thick " Thick 6" Thick GAS ACTUATED FASTENER " Thick STEEL THICKNESS 22 (.00) 8 (0.82) 20 (.). The entire pointed portion of the fastener must penetrate through the steel to obtain the tabulated values. See Detail A.. Steel must conform to ASTM A72 Grade 0 or A992 specifications, with Fy = 0 ksi, minimum. explanation of the load table icons (0.6) Detail A ENTIRE POINTED PORTION OF THE FASTENER MUST PENETRATE THROUGH THE STEEL C-SAS Simpson Strong-Tie Company Inc. (.9)

4 GCN0 Concrete Nailer Fasteners and Accessories The GDPS pins are designed to work in the GCN0 and GCN-MEPMAG gas-actuated nailer tools for installation into A6, A72 Grade 0 and A992 structural steel. The step-shank pin, with smaller-diameter tip, facilitates easier penetration into the steel, while the larger diameter upper shank provides more shear resistance and successful installation..09"/." Drive Pins for the GCN0 () Qty. Pins/ Pack + fuel cell Pack/ Carton GDPS-0KT 2,000 GDPS-62KT,000 GDPS-7KT,000 Compatible Tools Simpson Strong-Tie Others GCN0 GCNMEPMAG TF00, C GDPS GDPS Tension and in Steel See page for an explanation of the load table icons Dia. M M M M Steel Strength Allowable Allowable 6 Steel Thickness () 2 6 Steel Thickness () (2.8) THRU 0..0 (2.) ASTM A6 9 (0.2) 70 (0.76) 6 (0.7) (0.6) (.8) 22 (.00) 22 (.00) C-SAS Simpson Strong-Tie Company Inc. GDPS 0.0 (2.8) THRU 0..0 (2.) ASTM A72, Grade 0 or ASTM A992 0 (0.9) GWL-00 Lathing Washer and GMR- Magnetic Ring 70 (0.76) (0.69) 20 (0.9) 0 (.6) 20 (0.9). The entire pointed portion of the fastener must penetrate through the steel to obtain the tabulated values, unless otherwise indicated in footnote.. Steel strength must comply with the minimum requirements of ASTM A 6 (Fy = 6 ksi, Fu = 8 ksi) or ASTM A 72, Grade 0 (Fy = 0 ksi, Fu = 6 ksi), or ASTM A992 (Fy = 0ksi, Fu = 6 ksi). Tabulated values are based on minimum penetration depth of 0." (8.9 mm). Fuel Cell The GFC fuel cell is designed to operate with the GCN0 and GCN-MEP Gas-Actuated Concrete Nailers and also works with many major brand gas concrete-nailer tools. The fuel cell provides,200 shots and can operate at temperatures between F (-6 9 C). The fuel cells are offered in a 2-per-pack clamshell. Additionally, one fuel cell is included with each pack of,000 pins. Gas Fuel Cells Description Pack Qty. Packs/ Carton Compatible with these Tools GFC gram fuel cells 2 Simpson Strong Tie GCN-MEP and GCN-0 Others: TrakFast GFC-RC2 (2) gram fuel cells 2 6 TF00, Trak-It C GFC Gas and Powder-Actuated Fastening Systems The GWL-00 lathing washer is used with the GCN0 tool and attaches lath to the wall surface for overlaying scratch coats, brown coats and stucco. The washers are held onto the nose of the tool with the GMR- magnetic ring and are attached to the substrate (including concrete and CMU) with GDP pins, which fasten through the washer. No extra tools are needed to install the magnetic ring to the nosepiece of the tool. Lathing Washer and Magnetic Ring Description Pack Qty. Carton Qty. GWL-00 Lathing Washer, " Dia.,000,000 GMR- Magnetic Ring for GCN Lathing Washer and Magnetic Rings are sold seperately. 8

5 GCN0 Concrete Nailer Fasteners and Accessories Spiral Knurl Gas Pins GDPSK gas pins are designed for attaching plywood and OSB to cold-formed steel studs. The spiral knurl provides a positive lock and resists back out. Installed with the GCN0 concrete nailer or GCN-MEP (with magazine) concrete nailers, the GDPSK-8 gas pin provided faster installation and set up times, which contributes to lower labor costs. The hardened pins quickly and cleanly pierce the cold-form steel and leave the pin head flush with the wood fixture. The " length pin can be used for ½" ¾" thick plywood, and 22 gauge steel. Spiral Knurl Gas Pins.0,.2 diameter Head, for the GCN0 or GCN-MEP with magazine NEW Qty pins/ pack + fuel cell Packs/Carton Compatible with these Tools GDPSK-8KT ",000 Simpson Strong Tie: GCN-0, GCN-MEP w/ magazine. Others: TF00, C GDPSK Spiral Knurl Pin Tension and in Structural Steel Studs, ksi Yield Strength Allowable Loads Dist. Designation Thickness mils (gauge) Tension Shear See page for an explanation of the load table icons Gas and Powder-Actuated Fastening Systems GDPSK-8. Entire pointed portion of the fastener must penetrate through the steel to obtain tabulated values.. Fastener is to be installed in the center of the stud flange. Spiral Knurl Pin Tension and in Structural Steel Studs, 0 ksi Yield Strength GDPSK (2.77) 0.09 (2.77) 6 (20.6) Dist. 6 (20.6) (0.6) (0.6) Designation Thickness mils (gauge) Allowable Loads Tension 92 (0.) Shear 0 (0.67). Entire pointed portion of the fastener must penetrate through the steel to obtain tabulated values.. Fastener is to be installed in the center of the stud flange. (6) 68 () (20) (8) 7 (0.2) 28 (0.97) 0 (0.) 8 (0.2) 70 (0.) 89 (0.0) C-SAS Simpson Strong-Tie Company Inc. 86