GloEx Product List Assessment-Nail Selection
|
|
|
- Winifred Harrison
- 5 years ago
- Views:
Transcription
1 Item 01 Common Nail Bright Finish/HDG Flat Smooth/Ring FOR GENERAL CONSTRUCTION, CARPENTRY AND FRAMING. MADE TO CONFORM TO ASTM F1667. : Electrogalvanized option available Package s 3D 1-1/4" 14 13/64" 543 4D 1-1/2" 12-1/2 1/4" 294 6D 2" 11-1/2 17/64" 166 7D 2-1/4" 11-1/2 17/64" 150 box: 1 lb, 5 lbs 8D 2-1/2" 10-1/4 9/32" 100 carton : 50 lbs 10D 3" 9 5/16" 65 pail: 25 lbs 12D 3-1/4" 9 5/16" 60 16D 3-1/2" 8 11/32" 47 * customer's request is 20D 4" 6 13/32" 29 welcomed. 30D 4-1/2" 5 7/16" 22 40D 5" 4 15/32" 17 60D 6" 2 17/32" 10
2 Item 02 Spike Bright Finish/HDG Flat Smooth/Spiral FOR USING LANDSCAPING TIMBERS AND THICK TIMBERS. Picture : Electrogalvanized option available Package s 80D 8" 3/8" 3/4" 4 Bright 100D 10" 3/8" 3/4" 3 Bright 120D 12 3/8" 3/4" 2.5 Bright 80D 8" 3/8" 3/4" 4 HDG 100D 10" 3/8" 3/4" 3 50# ctns HDG 120D 12" 3/8" 3/4" 2,5 HDG 80D 8" 5/16" 17/32" 6 Spiral/HDG 100D 10" 5/16" 17/32" 5 Spiral/HDG 120D 12" 5/16" 17/32" 4 Spiral/HDG
3 Item 03 Box Nail HDG Flat Smooth/Ring/Sprial FOR CARPENTRY, FRAMING, GENGERAL CONSTRUCTION AND WOOD BOX. MADE TO CONFORM TO ASTM F1667. Picture : Electrogalvanized option available 3D 1-1/4" 14-1/2 7/32" 635 4D 1-1/2" 14 7/32" 473 5D 1-3/4" 14 7/32" 406 6D 2" 12-1/2 17/64" 236 7D 2-1/4" 12-1/2 17/64" 210 8D 2-1/2" 11-1/2 19/64" D 3" 10-1/2 5/16" 94 12D 3-1/4" 10-1/2 5/16" 88 16D 3-1/2" 10 11/32" 71 20D 4" 9 3/8" 52 Package s
4 Item 04 Duplex Nail Bright Finish Flat Top Double Round Smooth FOR TEMPORARY CONSTRUCTION WHERE NAIL REMOVAL IS REQUIRED; THE SECOND HEAD REMAINS EXPOSED, SUCH TYPICAL JOBS WOULD BE CONCRETE FORMING AND SCAFFOLDING. MADE TO CONFORM TO ASTM F1667. Picture Top Lower Distance between s 6D 1-3/4" 11-1/2 3/16" 17/64" 156 8D 2-1/4" 10-1/4 15/64" 9/32" 1/4" 90 10D 2-3/4" 9 1/4" 5/16" 59 12D 2-7/8" 9 1/4" 5/16" 57 16D 3" 8 9/32" 11/32" 3/8" 45 20D 3-1/2" 6 5/16" 3/8" 28 Package s & 25 lbs, / or Packed as customer
5 Item 05 Sinker Nail Vinyl Coated Flat Countersunk Checkered Smooth FOR GENERAL CONSTRUCTION, CARPENTRY AND FRAMING. MADE TO CONFORM TO ASTM F D 1-1/8" 15-1/2 11/64" 923 4D 1-3/8" 14 13/64" 527 6D 1-7/8" 13 15/64" 293 7D 2-1/8" 12-1/2 1/4" 223 8D 2-3/8" 11-1/2 17/64" D 2-7/8" 11 9/32" D 3-1/8" 10 5/16" 81 16D 3-1/4" 9 11/32" 64 20D 3-3/4" 7 3/8" 40 Package s
6 Item 06 Joint Hanger Nail Bright Finish/HDG Flat Smooth/Barbed FOR ATTACHING JOIST HANGERS TO WOOD STUDS. Picture Package s 1-1/2" 1-1/2" 9 5/16" 125 Smooth or Barbed 1-1/4" 1-1/4" 11 9/32" 240 Smooth or Barbed
7 Item 07 Fence Staple Bright Finish/HDG Flat Barbed FOR ATTACHING WOVEN WIRE FENCE, WELDED FENCE OR BARBED WIRE TO WOODEN FENCE POSTS. MADE TO CONFORM TO ASTM F1667. Picture 3/4" 3/4" " 1" 9 1/4" /4" 1-1/4" 9 1/4" /2" 1-1/2" 9 1/4" /4" 1-3/4" 9 1/4" 61 2" 2" 9 1/4" 53 Package s : Electrogalvanized option available
8 Item 08 Finish Nail Bright Finish/HDG Flat/Brad Smooth FOR TRIM AND FINE FINISHING CONSTRUCTION. MADE TO CONFORM TO ASTM F1667. Picture : Electrogalvanized option available 3D 1-1/4" 16-1/2" 0.099" 880 4D 1-1/2" " 630 6D 2" " 288 8D 2-1/2" 12-1/ " D 3" 11-1/ " D 3-1/4" 11-1/ " D 3-1/2" " 93 20D 4" " 65 Package s
9 Item 09 Casing Nail Bright Finish/HDG Flat Smooth/Spiral FOR TRIM, WINDOW FRAMES AND DECKS. MADE TO CONFORM TO ASTM F1667. Picture 5D 1-3/4" " 414 6D 2" 12-1/ " 244 8D 2-1/2" 11-1/ " D 3" 10-1/ " 96 12D 3-1/4" 10-1/ " 88 16D 3-1/2" " 74 Package s : Electrogalvanized option available
10 Item 10 Masonry "Stub" Nail Electrogalvanized Countersunk Smooth FOR FASTENING PIPE CONDUIT, SWITCH BOXES, CONER BEADS OR WIRE MESH TO MASONRY WALLS. MASONRY STUB NAILS ARE SIMILAR TO REGULAR MASONRY NAILS EXCEPT THEY HAVE A LARGER DIAMETER HEAD. THIS VARIATION IS TYPICALLY USED IN APPLICATIONS WHERE A SMOOTH MASONRY STYLE NAIL IS REQUIRED. 3/8" 9 3/8" 391 1/2" 9 3/8" 335 5/8" 9 3/8" 279 3/4" 9 3/8" 248 1" 9 3/8" /4" 9 3/8" /2" 9 3/8" 128 2" 9 3/8" /2" 9 3/8" 78 Package s
11 Item 11 Cut Masonry Nail Tempered Hardened Steel Bright Finish/Mechanical Galvanized _ Tapered FOR ATTACHING WOOD TO CINDER BLOCK, MORTAR JOINTS, BRICK WALLS AND FRESH CONCRETE. THEIR BLUNT POINT AND TAPERED SHANK HELP REDUCE SPLITTING. _ 3D 1-1/4" N/A N/A 151 4D 1-1/2" N/A N/A 120 6D 2" N/A N/A 85 7D 2-1/4" N/A N/A 78 8D 2-1/2" N/A N/A 64 10D 3" N/A N/A 48 12D 3-1/4" N/A N/A 42 16D 3-1/2" N/A N/A 34 20D 4" N/A N/A 29 Package s
12 Item 12 Roofing Nail Electrogalvanized Flat Smooth FOR APPLYING ROOFING ASPHALT SHINGLES, INSULATION BOARD AND FELT; USUALLY GALVANIZED, ROOFING NAILS HAVE A MUCH LARGER HEAD THAN COMMON NAILS. THIS HELPS TO PREVENT DAMAGE TO ASPHALT SHINGLES. MADE TO CONFORM TO ASTM F /4" 3/4" 11 7/16" 348 7/8" 7/8" 11 7/16" 306 1" 1" 11 7/16" /4" 1-1/4" 11 7/16" /2" 1-1/2" 11 7/16" /4" 1-3/4" 11 7/16" 152 2" 2" 11 7/16" /2" 2-1/2" 11 7/16" 114 3" 3" 11 7/16" /2" 3-1/2" 11 7/16" 89 4" 4" 11 7/16" 78 Package s : HDG & STAINLESS STEEL option available & Ring option available
13 Item 13 Plastic Cap Nail Electrogalvanized Round Plastic Cap Ring FOR USING HOUSEWRAP, FELT OR SHEATHING PROJECTS. THEY TEND TO HAVE A RING SHANK AND COME WITH A WIDE PLASTIC RING AT THE HEAD FOR EXCELLENT HOLDING POWER. Picture 3/4" 3/4" 12 15/16" 285 7/8" 7/8" 12 15/16" 275 1" 1" 12 15/16" /4" 1-1/4" 12 15/16" /2" 1-1/2" 12 15/16" /4" 1-3/4" 12 15/16" 167 2" 2" 12 15/16" /2" 2-1/2" 11 15/16" 133 3" 3" 11 15/16" 116 Package s 1 lb, 5 lbs & 2,000 pcs; 3,000 pcs, / or Packed as customer Cap's color is option by customer's choice.
14 Item 14 Metal Cap Nail Bright Finish/ Electrogalvanized Round/Square Metal Cap Ring FOR USING ASPHALT SHINGLES AND INSULATION AS WELL AND COME WITH EITHER SMOOTH, RING OR SPIRAL HEAVY SHANK, ALSO AVAILABLE IN A SQUARE SHAPE OR ROUND. Package s 3/4" 3/4" 12 1" 285 7/8" 7/8" 12 1" 275 1" 1" 12 1" /4" 1-1/4" 12 1" /2" 1-1/2" 12 1" /4" 1-3/4" 12 1" 167 2" 2" 12 1" /2" 2-1/2" 11 1" 133 3" 3" 11 1" 116 Cap's color is option by customer's choice.
15 Item 15 Phos. Coated Cupped Drywall Nail Gray Phosphated Coated Cupped Smooth /Long FOR ATTACHING DRYWALL TO WOOD STUDS. MADE TO CONFORM TO ASTM C514. Package s 1-3/8" 13 19/64" 320 Smooth 1-5/8" 13 19/64" 270 Smooth 1-7/8" 13 19/64" 279 Smooth 2-1/8" 13 19/64" 230 Smooth 2-3/8" 11-1/2 3/8" 148 Smooth
16 Item 16 Drywall Nail Cement Coated Flat Smooth /Long FOR ATTACHING DRYWALL TO WOOD STUDS. MADE TO CONFORM TO ASTM C /8" 12-1/2 11/32" /8" 13 3/8" /2" 12-1/2 11/32" /8" 12-1/2 11/32" 264 2" 12-1/2 11/32" 208 2" 13 3/8" 235 Package s
17 Item 17 Drywall Nail Bright Finish Flat Ring /Long FOR ATTACHING DRYWALL TO WOOD STUDS. MADE TO CONFORM TO ASTM C514. Picture 1-3/8" 12-1/2 19/64" /8" 12-1/2 19/64" 295 2" 12-1/2 19/64" 160 Package s : Electrogalvanized option available
18 Item 18 Patio/Deck Nail Hot Dipped Galvanized 304 Stainless steel Flat Ring/Spiral FOR PATIO AND DECK CONSTRUCTION. Package s (Stainless steel ) 6D 2" 11 9/32" D 2-1/2" 11 9/32" D 3" 10 9/32" D 3-1/4" 10 9/32" D 3-1/2" 9 5/16" 52 58
19 Item 19 Fluted Masonry Nail Tempered Hardened Steel Flat Fluted FOR ATTACHING FURRING STRIPS AND FLOOR PLATES TO UNCURED CONCRETE. MADE TO CONFORM TO ASTM F /4" 9 5/16" 248 1" 9 5/16" /4" 9 5/16" /2" 9 5/16" /4" 9 5/16" 112 2" 9 5/16" /2" 9 5/16" 78 3" 9 5/16" /2" 9 5/16" 48 Package s
20 Item 20 Underlayment Nail Bright Finish/ Electrogalvanized Flat Ring FOR LAYING PLYWOOD OR COMPOSITION UNDERLAYMENT OVER SUBFLOORS OR FLOOR JOISTS. Package s 1" 12-1/2 1/4" 624 Bright 1-1/4" 12-1/2 1/4" 345 Bright 1-1/2" 12-1/2 1/4" 290 Bright 2" 12-1/2 1/4" 204 Bright 2-1/8" 12 17/64" 171 Bright 1" 12-1/2 1/4" 624 EG 1-1/2" 12-1/2 1/4" 290 EG
21 Item 21 Polebarn Nail Bright Stiff Stock/ Tempered Hardened Steel Flat Ring FOR LOAD-BEARING WOODEN STRUCTURES WHERE GREATER HOLDING POWER IS ESSENTIAL. MADE TO CONFORM TO ASTM F D 2-1/2" 9 5/16" 78 10D 3" 9 5/16" 66 12D 3-1/4" 9 5/16" 61 16D 3-1/2" 9 5/16" 57 20D 4" 7 3/8" 35 30D 4-1/2" 7 3/8" 31 40D 5" 7 3/8" 28 60D 6" 5 15/32" 17 80D 8" 5 15/32" 13 Package s
Specifications - Common Nails Diamond point, Flat head, round smooth shank, Bright, HDG, EG or cement coated (resin or vinyl) finish
Specifications - Common Nails Diamond point, Flat head, round smooth shank, Bright, HDG, EG or cement coated (resin or vinyl) finish ASTM F 1667-05 Table 15 Type 1, Style 10 - Common Nails Size Length
product catalog packaged Nails & screws
Distributed by: BEST MATERIALS Ph: 8004747570, 6022728128 Fax: 6022728014 www.bestmaterials.com Email: Sales@BestMaterials.com packaged Nails & screws www.nationalnail.com product catalog contents program
Nails, Fasteners, Connectors, and Framing
Nails, Fasteners, Connectors, and Framing Nails To order Nail Sizes Nail length is often referred to as d or penny. For example a 10-D nail or a 10 Penny Nail. Use the following chart for nail length reference.
FASTENERS BUILDING DEPARTMENT
FASTENERS BUILDING DEPARTMENT 952-446-1660 WWW.CITYOFMINNETRISTA.COM This handout is intended only as a guide and is based in part on the 2015 Minnesota Residential Code, Minnetrista City ordinances, and
ACCENT BUILDINGMATERIALS BUILDING STRONG PARTNERSHIPS GENERAL CONSTRUCTION DRYWALL/ACOUSTICAL ROOFING CONCRETE ACCESSORIES SPECIALTY ITEMS & MORE
ACCENT BUILDINGMATERIALS BUILDING STRONG PARTNERSHIPS GENERAL CONSTRUCTION DRYWALL/ACOUSTICAL ROOFING CONCRETE ACCESSORIES SPECIALTY ITEMS & MORE Accent started in 985 and is the largest supplier of industrial
Professional Quality FOR THE Professional Contractor. Marketing Offerings. 225 Elm Ave Galt, Ca bmdusa.com
Professional Quality FOR THE Professional Contractor Marketing Offerings Header Boards Professional Quality FOR THE Professional ContraCtor ID: QBHB3614 14" PVC Board Proudly Distributed by 36" Professional
eco-shake INSTALLATION INSTRUCTION
1 eco-shake INSTALLATION INSTRUCTION NOTE: Shuffling the eco-shakes during installation may be necessary to obtain a uniform color throughout the roof. Due to the natural wood content in the ecoshakes,
Flooring Nails 6-D Flooring Nails $3.40 / 1# 6-D Flooring Nails $14.50 / 5# 8-D Flooring Nails $3.40 / 1# 8-D Flooring Nails $14.
Nails Nails Drywall Screws Common Nails 4D Common Nails $3.85 / 1# 6D Common Nails $3.00 / 1# 6D Common Nails $74.25 / 50# 8D Common Nails $3.00 / 1# 8D Common Nails $74.25 / 50# 10D Common Nails $3.00
Fastener Schedule. a, b, c. FASTENER Roof 3-8d (2 1 / ) / ) 3-10d. 3-10d ( ) 3-16d box nails. (3 1 2 toe nails on one side
ITEM 1 DESCRIPTION OF BUILDING ELEMENTS Blocking between joists or rafters to top plate, toe 2 Ceiling joists to plate, toe 3 4 5 6 Ceiling joists not attached to parallel rafter, laps over partitions,
DIVISION 6 WOOD AND PLASTICS
DIVISION 6 WOOD AND PLASTICS PART 1 - GENERAL 1.01 SUMMARY A. This Section includes the following: 1. Wood framing. 2. Wood supports. 3. Wood blocking. 4. Wood cants. 5. Wood nailers. 6. Wood furring.
FEATURES APPLICATIONS
Model NO.: CN55 * Light weight * Light weight * Big load capacity * Big load capacity * Comfortable rubber grip * Comfortable rubber grip Model NO.: CN57 * Making pallets, drums and export * Making pallets,
Installation Instructions
Installation Instructions SLICKER MAX RAINSCREEN Page List of Approved Compatible Products 2 Nail Selection Guide 3 General Installation 4 Top of Wall Detail 5 Bottom of Wall Detail 6 Wall Corner Detail
DIRECT FASTENING SYSTEMS. Hilti. Outperform. Outlast.
DIRECT FASTENING SYSTEMS. Hilti. Outperform. Outlast. Powder-Actuated Tools and Fasteners DX - Light Tools DX 460-F8 Page 140 DX 460 MX Page 141 Consumables X-U, X-C, X-FS, X-HS U, X-M, X-EM Page 142 Insulation
NOBE ApS ~ Bjødstrupvej 10 ~ DK-8410 Rønde ~ ~
2017 NOBE ApS offers under the brand RGN a wide range of fastening tools. Our aim is to offer good quality to the best value for your money. We cooperate closely with experienced dealers to ensure that
(c) 2016, American Fastening Systems, Maplewood, MN 55109, Ph , Ph
We offer a wide range of screws in 1lb and 5lb buckets, along with bulk boxes. We have planogram offerings from 4ft to 16ft ready to ship. We can tailor any WoodPro planogram for each unique market. If
SECTION CARPENTRY
SECTION 06100 CARPENTRY PART 1 GENERAL 1.01 SUMMARY A. Section Includes: Carpentry work including grounds, nailers, blocking, miscellaneous framing, plywood backing panels, plywood sheathing, preservative
PRODUCT INFORMATION 0.145/0.130" 100 5,
PROUCT INFORMATION Fasteners.300" Head rive Pins rive pins with a.300" head are designed for permanently fastening a fixture to concrete, some types of concrete block, and A36 or A572 structural steel.
Drill Bits & Hole Saws
F o r P Drill Bits & Hole Saws r o f e s s i o n a l s. Klein drill bits provide accuracy and consistency for professionals. Made of top-of-the-line materials for longer-lasting performance, Klein drill
LOOSE NAILS. Click to start
LOOSE NAILS Click to start SELECTION GUIDE Available Finishes Finish Indoor Outdoor Coastal Not all finishes are available with all nail types Gold Passivated Zinc Blued Nickel Plated Brass Plated Florentine
With Illustrations, Drawings & Step By Step Details. Click Here To Download 12,000 Shed Plans. 1 P a g e Download 12,000 More Shed Plans
With Illustrations, Drawings & Step By Step Details Click Here To Download 12,000 Shed Plans 1 P a g e Download 12,000 More Shed Plans Table of Contents OVERVIEW... 3 MATERIALS & CUTTING LISTS... 4 DRAWINGS,
SECTION ROUGH CARPENTRY
SECTION 06100 PART I - GENERAL 1.01 DESCRIPTION A. Scope: Work of this Section shall include all materials and installation necessary to provide Rough Carpentry as shown and detailed on the Drawings and
Installation Instructions
Installation Instructions SLICKER CLASSIC RAINSCREEN Page List of Approved Compatible Products 2 Nail Selection Guide 3 General Installation 4 Insulation Board Installation 5 EIFS Installation 6 Top of
Asphalt Shingle Installation at Roof Edges, Intersections and Valleys
& Asphalt Shingle Installation at Roof Edges, Intersections and Valleys Abstract This updated document is intended to provide additional guidance and options for asphalt shingle installations at roof edges,
Holemaking Products & Accessories
Holemaking Products & Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy
General Construction. Common Nail Most popular nail and versatile style. For construction, carpentry and framing. Larger shank provides greater
General Construction Common Nail Most popular nail and versatile style. For construction, carpentry and framing. Larger shank provides greater resistance to bending. Made to conform to ASTM F1667. Common
DIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: NAILS REPORT HOLDER: MiTek USA, INC.
0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-3768 Reissued 08/2017 This report is subject to renewal 08/2019. DIVISION: 06 00
A. Rough carpentry includes but is not limited to the following:
SECTION 06100 ROUGH CARPENTRY PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division-1 Specification Sections,
Best Barns USA. Assembly Book. 12'x 16' the Millcreek. Revised September 19, 2017
Assembly Book Best Barns USA Revised September 19, 2017 the Millcreek 12'x 16' Manufactured by Reynolds Building Systems, Inc 205 Arlington Drive Greenville, PA 16125 This manual is copyrighted Under the
the Greenbriar 12' x 20' Best Barns USA Assembly Book Revised April
Best Barns USA Assembly Book Revised April 28 2015 the Greenbriar 12' x 20' Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive Greenville, PA 16125 724-646-3775 This manual is copyrighted.
PRIMED STRAND REVERSIBLE SHAKE
PRIMED STRAND REVERSIBLE SHAKE PRIOR TO INSTALLATION Inspect product for any issues before installing (breakage, surface defects, foreign objects). Do not install questionable product. Report any problems
Best Barns USA Assembly Book
Best Barns USA Assembly Book Revised September 19, 2017 the Millcreek 12'x 20' Manufactured by Reynolds Building Systems, Inc 205 Arlington Drive Greenville, PA 16125 This manual is copyrighted Under the
Standard Specification for Driven Fasteners: Nails, Spikes, and Staples 1
Designation: Standard Specification for Driven Fasteners: Nails, Spikes, and Staples 1 This standard is issued under the fixed designation F1667; the number immediately following the designation indicates
B. Related Sections: The following Sections contain requirements that relate to this Section:
SECTION 07311 - ASPHALT SHINGLES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
Installation Instructions for Standard Lap and Self-Aligning Lap Siding
Installation Instructions for Standard Lap and Self-Aligning Lap Siding 7/16 in. Standard Laps Include: All Old Mill Widths, Cedar Shake Lap and Smooth Lap 1/2 in. Self-Aligning Include: 8 in. and 12 in.
Construction III Curriculum Maps
Curriculum Maps Unit 1: Shop Safety Unit 2: Shop Equipment and Tool Review Unit 3: Project I Unit 4: Building Plans and Materials Unit 5: Footings and Foundations Unit 6: Floor Framing Unit 7: Wall Framing
Vinyl Gazebo Instructions
P a g e 1 Vinyl Gazebo Instructions 10 Vinyl Gazebo Shown Thank you for the purchase of your New Gazebo. Depending on the size of your Gazebo, installation can usually be completed in 1 to 2 days. These
1.04 QUALITY ASSURANCE
SECTION 07312 ARCHITECTURAL ASPHALT SHINGLES PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
A. Product Data: For each type of process and factory-fabricated product indicated.
SECTION 06100 - ROUGH CARPENTRY PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Wood framing. 2. Wood supports. 3. Wood blocking. 4. Wood cants. 5. Wood nailers. 6. Wood furring.
Best Barns USA Assembly Book
Best Barns USA Assembly Book Revised September 12, 2017 the Denver 12' x 16' Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive Greenville, PA 16125 This manual is copyrighted. Under the
Material Description Qty Units Cost Total SQUARE FOOTAGE TOTAL Area 1692 sqft
Material Report for plan: Willowdale A Page 1 of 7 SQUARE FOOTAGE TOTAL Area 1692 sqft EXCAVATION & FOUNDATION EXCAVATION & BACKFILL Conc. Footing (volume) 5 m³ 122.50 612.50 Conc. Footing (length) 6"x20"
Slate Shingle Specifications
Slate Shingle Specifications California Slate is a proud member of the Slate Roofing Contractors Association of North America, Inc. (SRCA) which publishes Section 07310 Slate Shingles setting forth architectural
ASPHALT T E C H N O L O G I E S
ASPHALT T E C H N O L O G I E S Evaluation of Active Ventilation Products Inc. Aura-D (AV-24) Ventilator in Accordance With FLORIDA BUILDING CODE PROTOCOL TAS 100(A)-95 TEST PROCEDURE FOR WIND AND WIND
Installation Instructions for Old Mill Shingle and Designer Shake Lap Siding
Installation Instructions for Old Mill Shingle and Designer Shake Lap Siding Includes: Cove, Craftsmen Staggered, Diamond, Fish Scale, Octagon, Round and Old Mill Shingle Lap Important: Read and understand
FASTENERS. Fasteners. Steel fasteners. Hexagon socket screws. Steel fasteners MC6S
Steel fasteners 21 FASTENERS Steel fasteners Hexagon socket s MC6S Hexagon socket head cap Din 912. (ISO 4762). * Fully threaded. 100 101 102 12.9 Uncoated 8.8 Uncoated 8.8 BZP Blanc Zink plated Dim mm
PROJECT INSTRUCTIONS Roofing
PROJECT INSTRUCTIONS Roofing This handout outlines some basic regulations contained within the 2015 Minnesota State Building Code, as well as other good building practices. However, this handout is not
HowtoPlans..org. Skyline 10'x14' Garden Shed Plan
HowtoPlans.org Skyline 10'x14' Garden Shed Plan Compare our Free vs. Premium Shed Plan This perfectly designed plan will guide you through the entire process of building your very own shed for any backyard
Installation Instructions for Siding
Smart-Shingle TM System "The new smart way to install cedar shingles." - This Old House Installation Instructions for Siding V3.2 INSTALLATION GUIDE MARKS Shingle-Strip 0 1 2 3 4 5 6 7 8 9 10 11 12 13
REPORT HOLDER: ISAIAH INDUSTRIES, INC. EVALUATION SUBJECT:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 1360 Reissued 08/2018 This report is subject to renewal 08/2019. DIVISION: 07 00
Installation Manual for Thermo Panel
Installation Manual for Thermo Panel 1 About Thermo Panel is a building wrap, insulation, air and water barrier, mold inhibitor and cold bridge eliminator all-in-one. Delivering an R-value of up to 5 on
Turada Hardwood Shingles and Shakes Installation instructions
1. General 1.1 Maximum Exposure: Maximum exposure for wood shingles and shakes shall comply with Table 1 herein, unless specifically specified in the roof assemblies Product Approval. 1.2 Solid and Spaced
We continually strive to create unique experiences to ensure that your story is better... and for us, it s a privilege to be a part of it.
PRODUCT GUIDE We continually strive to create unique experiences to ensure that your story is better... and for us, it s a privilege to be a part of it. National Nail Employee-Owners BRAND EXPERIENCE SOLUTIONS
Best Barns USA Assembly Book
Best Barns USA Assembly Book Revised July 27, 2012 the North Dakota with pocket doors 12' x 20' Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive Greenville, PA 16125 724-646-3775 This
Holemaking Products & Accessories
Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy and consistency to get
Trusted ICC ES PASLODE, Evaluation. report, or as to any. ICC-ES Evaluation
0 ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.orgg Most Widely Accepted and Trusted ESR 3072 Reissued 09/2018 Revised 10/2018 This report is subject to renewal 09/2020.
Best Barns USA Assembly Book
Best Barns USA Assembly Book Revised September 13, 2017 the North Dakota with pocket doors 12' x 20' Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive Greenville, PA 16125 This manual
Installation Guide. Shingles. Classical. Shingles. Warning. Storage. Cutting Shingles. Touch-Up. Eastern White Cedar
Installation Guide Before you begin, take the time to read this entire guide to clearly understand the requirements and steps to follow for proper installation. The Fastening Make shingle fastening simpler
The better way to build TM. Installation Manual ROOF SIPs
The better way to build TM Installation Manual ROOF SIPs August 2017 ROOF SIPs Installation Manual Table of Contents Topics General Requirements.................................... 3 Materials..............................................
CSI Section DMI Light Gage Structural Steel Framing Systems. Blocking Fire Rated Pre-cut (Proprietary) Furring Wall Preservative Treated
DMI Database CCF5IF9HGLPD-QB (4,88) $14,775.00 CSI Section 05400 DMI Light Gage Structural Steel Framing Systems Angle Framing Bridging Channel Flat Strapping Furring Clip Angle Soffit/Fascia/Deck Framing
SECTION SHEET METAL FLASHING AND TRIM
SECTION 07620 SHEET METAL FLASHING AND TRIM PART 1 GENERAL 1.1 SUMMARY A. Section includes flashings and counterflashings, sheet metal roofing and fabricated sheet metal items, as indicated in Schedule.
HowtoPlans..org. DuraMax 8'x12 Garden Shed Plan
HowtoPlans.org DuraMax 8'x12 Garden Shed Plan Compare our Free vs. Premium Shed Plan This perfectly designed plan will guide you through the entire process of building your very own shed for any backyard
ROOFING APPLICATION STANDARD (RAS) No. 130 INSTALLATION CRITERIA FOR WOOD SHINGLES AND SHAKES APPLICATION
ROOFING APPLICATION STANDARD (RAS) No. 130 INSTALLATION CRITERIA FOR WOOD SHINGLES AND SHAKES APPLICATION 1. 2. 3. Scope 1.1 This application standard provides the minimum installation criteria for wood
Carpentry. EXAM INFORMATION Items. Points. Prerequisites. Course Length. Career Cluster EXAM BLUEPRINT. 1- Materials, Fasteners & Adhesives 10%
EXAM INFORMATION Items 73 Points 73 Prerequisites NONE Course Length DESCRIPTION This is the first in a sequence of courses that prepares individuals to layout, fabricate, erect, install, and repair wooden
HowtoPlans..org. 10'x10' Storage Shed Plan
HowtoPlans.org 10'x10' Storage Shed Plan Disclaimer The information provided here will show you how to build a chicken coop. However, we at howtoplans.org do not claim that the recommended techniques are
Sections & Details VOCABULARY
1 Sections & Details VOCABULARY 1 ROOF FRAMING DETAIL RIDGE BOARD SHEATHING SHINGLES WEB FASCIA RAFTER (chord) SOFFIT SHEATHING STUD INSULATION DOUBLE TOP PLATE CEILING JOIST 2 FOUNDATION DETAIL STUD SHEATHING
STORAGE SHED. Storage Shed Project Plan #854 Sheet 1 of Riverside Dr., Suite 212 Metairie, LA SouthernPine.com SouthernPineDecks.
STORAGE SHED Project Plan #854 Sheet 1 of 6 Enjoying your backyard can be relaxing, but it can also get crowded. There s lawn furniture, gardening tools and supplies, camping gear, maybe even pool equipment.
Sheet Steel Facts. Most common head design for self-drilling, self-tapping screws.
Sheet Steel Facts Fastener Guide for Sheet Steel Building Products August, 2003 Fastener Materials Fasteners are manufactured from several materials and coatings. For the purpose of this fact sheet, the
B. Shop Drawings: Include elevations, door edge details, frame profiles, metal thicknesses, preparations for hardware, and other details.
SECTION 081113 - HOLLOW METAL DOORS AND FRAMES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Standard hollow metal doors and frames. 1.2 SUBMITTALS A. Product Data: For each type of product indicated.
SG-30 A P P L I C A T I O N I N S T R U C T I O N S. Directions For Application
1 2 3 General Instructions NOTICE: THESE SHINGLES MUST BE APPLIED TO CONFORM WITH ALL APPLICABLE BUILDING CODES. THESE DIRECTIONS REPRESENT COMMON AND ACCEPTED ROOFING PRACTICES. DEVIATIONS FROM THESE
Coatings ASTM B117 SST Salt Spray Test Kesternick Phosphate Zinc E-Coat Dip Spin Coatings
Head and Thread types Coatings ASTM B117 Two major types of coating tests: SST Salt Spray Test screws are placed in a container and a salt solution is sprayed on the screws for a number of hours, checking
9Upgrades to Windproof Your Roof
9Upgrades to Windproof Your Roof Nail down the details to keep asphalt shingles where they belong By Mike Guertin Asphalt shingles are getting better all the time, but the elements can still get the best
Best Barns USA Assembly Book
Best Barns USA Assembly Book Revised December 6, 2013 the Denver-R 12' x 20' Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive Greenville, PA 16125 724-646-3775 This manual is copyrighted.
Technical Note No. 026
Technical Note No. 026 Strand Substrate Installed Vertically for Board & or Board-on-Board Applications This Technical Note is an addendum to the Strand Substrate Application Instructions and Trim and
DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: ASPHALT SHINGLES REPORT HOLDER: IKO INDUSTRIES LIMITED
0 Most Widely Accepted and Trusted ICC-ES Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-3532 Reissued 01/2017 This report is subject to renewal 01/2019. DIVISION: 07 00 00 THERMAL
the Greenbriar 12' x 16' Best Barns USA Assembly Book Revised June 4, 2013
Best Barns USA Assembly Book Revised June 4, 2013 the Greenbriar 12' x 16' Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive Greenville, PA 16125 724-646-3775 This manual is copyrighted.
INSTALLATION MANUAL STORAGE
IMVersion 1.1 INSTALLATION MANUAL GENERAL GUIDE: The information in this IM is intended to serve as a general guide to proper installation with no warranties intended or implied. Prime Panels assumes no
Best Barns USA Assembly Book
Best Barns USA Assembly Book Revised September 19, 2017 Garage Door by Owner the Tahoe 12'x 20' Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive Greenville, PA 16125 This manual is copyrighted.
Best Barns USA Assembly Book Revised October 24, 2017
Best Barns USA Assembly Book Revised October 24, 2017 Garage Door by Owner the Tahoe 12'x 16' Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive Greenville, PA 16125 This manual is copyrighted.
Entry Level Assessment Blueprint Carpentry
Entry Level Assessment Blueprint Carpentry Test Code: 4215 / Version: 01 Specific Competencies and Skills Tested in this Assessment: Safety Demonstrate safe material handling practices Display comprehension
the Greenbriar 12' x 20' Best Barns USA Assembly Book Revised May 31, 2013
Best Barns USA Assembly Book Revised May 31, 2013 the Greenbriar 12' x 20' Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive Greenville, PA 16125 724-646-3775 This manual is copyrighted.
AIA Specification. Section Slate Shingles PART 1 GENERAL
AIA Specification Section 07315 Slate Shingles PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
50948-RHN Putney. 06 January This document includes: Aluminium strip/ sheet coverings/ flashings 1. Code Section Revision Dated
50948-RHN Putney 06 January 2018 This document includes: Code Section Revision Dated H72 Aluminium strip/ sheet coverings/ flashings 1 Table of Contents Title H72 Aluminium strip/ sheet coverings/ flashings
Butt Two pieces of wood meeting with flat sides adjoining usually at right angles. Some type of connector is needed to prevent movement.
Wood Connections There are basically five different types of connectors: Interlocking (carpentry joints), Dowel, Metal Connectors, Special Formed Connectors and Adhesives. I Interlocking (Carpentry Joints)
application instructions
application instructions architectural collection cedar shake 76 series lap siding General At the time of manufacture, siding meets or exceeds the performance standards set forth in Composite Panel Association
SECTION WOOD SHINGLES
SECTION 07 31 29.13 WOOD SHINGLES SPEC WRITER NOTES: 1. Delete text between // // not applicable to project. Edit remaining text to suit project. 2. This guide specification does not include requirements
Attachment of Residential Deck Ledger to Side of Metal Plate Connected Wood Truss Floor Ladder. Installation Instructions Revised 9/2/2016
Attachment of Residential Deck Ledger to Side of Metal Plate Connected Wood Truss Floor Ladder Installation Instructions Revised 9/2/2016 SBCA has been the voice of the structural building components industry
Best Barns USA Assembly Book
Best Barns USA Assembly Book Revised September 13, 2017 the North Dakota with pocket doors Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive Greenville, PA 16125 Building Size 12'x12'
ROOFING APPLICATION STANDARD (RAS) No. 130
ROOFING APPLICATION STANDARD (RAS) No. 130 1. Scope 1.1 This application Standard provides the minimum installation criteria for wood shingles and shakes. 2. Definitions 2.1 For definitions of terms used
HowtoPlans..org. 10'x16' Storage Shed Plan
HowtoPlans.org 10'x16' Storage Shed Plan Disclaimer The information provided here will show you how to build a chicken coop. However, we at howtoplans.org do not claim that the recommended techniques are
Timberline and Sovereign Expanded Fastener Placement Area
Timberline and Sovereign Expanded Fastener Placement Area Information Sheet Updated: 2004 Quality You Can Trust Since 1886... From North America s Largest Roofing Manufacturer Less Fastening Hassles! Announcing
SD Screw #10x2½" 16dx2½" SD Screw #9x2½" SD Screw 10dx1½" 8d Common N54A 0.25" 0.131"
DESIGNED FOR FASTENER TYPES Fastener Types and s Specified for Simpson Strong-Tie Connectors Many Simpson Strong-Tie connectors have been designed and tested for use with specific types and sizes of fasteners.
Installation Instructions for Panel Siding and Soffit
Installation Instructions for Panel Siding and Soffit 7/16 in. Panels Include: Sturdy Panel, Square Edge, 3/4 in. Channel and Reverse Board and Batten (RB&B) 1/2 in. Panels Include: Adobe Shiplap and 808
Experienced Worker Assessment Blueprint Carpentry
Blueprint Carpentry Test Code: 0207 / Version: 01 Specific Competencies and Skills Tested in this Assessment: Hand Tools Use and maintain fastening and prying tools Use and maintain sawing and cutting
PART MATERIALS. Section Fencing Materials. Description
PART 03000 - MATERIALS Section 03010 - Fencing Materials Description 03010.00 Scope - This section consists of the test requirements, specifications and tolerances for barbed wire, woven wire and chain
STORAGE SHED. Storage Shed SOUTHERN FOREST PRODUCTS ASSOCIATION SOUTHEASTERN LUMBER MANUFACTURERS ASSOCIATION
STORAGE SHED SOUTHERN FOREST PRODUCTS ASSOCIATION SOUTHEASTERN LUMBER MANUFACTURERS ASSOCIATION P.O. BOX 641700 KENNER, LA 70064-1700 (504) 443-4464 FAX (504) 443-6612 www.southernpine.com Storage Shed
Best Barns USA Assembly Book
Best Barns USA Assembly Book Revised August 15, 2017 the Richmond 16'x32' Building w/ Full Loft Manufactured by Reynolds Building Systems, Inc 205 Arlington Drive Greenville, PA 16125 This manual is copyrighted
Best Barns USA Assembly Book
Best Barns USA Assembly Book Revised February 4, 2016 the Millcreek-R 12'x 20' Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive Greenville, PA 16125 724-646-3775 This manual is copyrighted.
PRODUCT GUIDE REV. 8/18
PRODUCT GUIDE REV. 8/18 "We love using STINGER products. They are reliable, lightweight and get the job done right!" - RoofCARE "We love STINGER products. We've tried all the cap nailers and nothing stacked
SECTION PVC THATCH SHINGLE ROOFING SYSTEM PART 1 GENERAL 1.01 SUMMARY
SECTION 07312 PVC THATCH SHINGLE ROOFING SYSTEM PART 1 GENERAL 1.01 SUMMARY A. This Section Includes the following: 1. Endureed Dominica PVC thatch shingles. 2. Self- adhering sheet underlayment. B. Related
Heckmann Building Products Inc. DOVETAIL SLOT AND ANCHORS SPECIFICATION SECTION MASONRY ANCHORS AND ACCESSORIES PART 1 GENERAL
Heckmann Building Products Inc. DOVETAIL SLOT AND ANCHORS SPECIFICATION MASONRY ANCHORS AND ACCESSORIES PART 1 GENERAL SECTION 04085 1.1 SECTION INCLUDES NOTE: Delete items below not required for project.
Best Barns USA Assembly Book
Best Barns USA Assembly Book Revised August 15, 2017 the Richmond 16'x20' Building w/ Full Loft Manufactured by Reynolds Building Systems, Inc 205 Arlington Drive Greenville, PA 16125 This manual is copyrighted