TYPICAL STANDOFF GLASS RAIL ELEVATION TYPICAL SECTION RS0B20 WITH RECTANGULAR BACK PLATE TYPICAL STAIRS

Size: px
Start display at page:

Download "TYPICAL STANDOFF GLASS RAIL ELEVATION TYPICAL SECTION RS0B20 WITH RECTANGULAR BACK PLATE TYPICAL STAIRS"

Transcription

1 Revisions By: CRL SRS STANDOFF RAILING SYSTEM CRL GLASS RAIL S RS0B20 w/ RECTANGULAR BACK PLATE CRL'S GLASS RAIL S CAN BE USED FOR MOUNTING GLASS PANELS UP TO 3/4" (19 MM) IN THICKNESS. THE 4" X 8" (102 X 203 MM) BACK PLATE GIVES THE INSTALLER MORE ADJUSTMENT AND SIX ANCHOR POINTS DURING THE INSTALLATION FOR THOSE TRICKY JOB SITE. THIS BACK PLATE CAN BE FASTENED DIRECTLY TO STEEL, WOOD, OR CONCRETE SUBSTRATES AND SHIMMED AS REQUIRED WITH BLOCKING. THIS VERSATILE FEATURES TWO 2" (51 MM) DIAMETER CAPS WITH THREADED 3/8" - 16 THREADED RODS TO SECURE THE GLASS PANEL. THE 2" (51 MM) DIAMETER STANDOFFS ARE MECHANICALLY FASTENED TO A 3/8" (9.5 MM) THICK 316 GRADE BACK PLATE THAT IS PRE-DRILLED FOR MOUNTING. TWO POPULAR FINISHES ARE AVAILABLE - BRUSHED & POLISHED. CUSTOM STANDOFF DIAMETERS AND LENGTHS ARE ALSO AVAILABLE. ATTACHMENT ANCHORS FOR STEEL, WOOD, OR CONCRETE SUBSTRATES ARE SOLD SEPARATELY. (12 MM TO 19 MM) MONOLITHIC TEMPERED GLASS OR (13.52 & MM) LAMINATED TEMPERED GLASS USING DU PONT SENTRYGLAS INTERLAYERS * COMPACT DESIGN FOR MINIMAL OBSTRUCTION * COMPLETE WITH MOUNTING PLATE * FOR USE WITH 1/2" AND 3/4" (12 AND 19 mm) TEMPERED MONOLITHIC GLASS APPLICATIONS OR (13.52 & MM) USING DU PONT SENTRYGLAS INTERLAYERS * BRUSHED OR POLISHED 316 GRADE STAINLESS FINISHES AVAILABLE * DESIGNED FOR STEEL, WOOD, OR CONCRETE MOUNTING ATTACHMENT TOE OF STAIR OVERALL GLASS GUARDRAIL / HANDRAIL 6" [ mm] 6" [ mm] CRL RS0B20 STANDOFF BRACKET & FITTINGS STANDARD GUARDRAIL 36" [914.4 mm] STANDARD HANDRAIL STANDARD GUARDRAIL LINE OF MOUNTING SUBSTRATE NOSING LINE TYPICAL STANDOFF GLASS RAIL ELEVATION TYPICAL SECTION RS0B20 WITH RECTANGULAR BACK PLATE TYPICAL STAIRS 1

2 Revisions By: CRL SRS STANDOFF RAILING SYSTEM CRL GLASS RAIL S RS0B25 w/ DOMED CAP & OVAL BACK PLATE CRL'S GLASS RAIL S CAN BE USED FOR MOUNTING GLASS PANELS UP TO 3/4" (19 MM) IN THICKNESS. OPTIONAL STANDOFFS WITH DOMED CAPS & OVAL-SHAPED BACK PLATES CAN ALSO BE USED. THE 4" X 9" (102 X 228 MM) BACK PLATE GIVES THE INSTALLER MORE ADJUSTMENT AND FOUR ANCHOR POINTS DURING THE INSTALLATION FOR THOSE TRICKY JOB SITE. THIS BACK PLATE CAN BE FASTENED DIRECTLY TO STEEL, WOOD, OR CONCRETE SUBSTRATES AND SHIMMED AS REQUIRED WITH BLOCKING. MOUNTING FLAT HEAD ANCHORS MAY BE CONCEALED USING A PLATE COVER. THIS VERSATILE FEATURES TWO 2-3/8" (60.3 MM) DIAMETER DOMED CAPS WITH THREADED 3/8" - 16 THREADED RODS TO SECURE THE GLASS PANEL. THE 2" (51 MM) DIAMETER STANDOFFS ARE MECHANICALLY FASTENED TO A 3/8" (9.5 MM) THICK BACK PLATE THAT IS PRE-DRILLED FOR MOUNTING. TWO POPULAR FINISHES ON THE BACK PLATE OR COVER MATERIAL ARE AVAILABLE - BRUSHED & POLISHED. CUSTOM STANDOFF DIAMETERS AND LENGTHS ARE ALSO AVAILABLE. ATTACHMENT ANCHORS FOR STEEL, WOOD, OR CONCRETE SUBSTRATES ARE SOLD SEPARATELY. (12 MM TO 19 MM) MONOLITHIC TEMPERED GLASS OR (13.52 & MM) LAMINATED TEMPERED GLASS USING DU PONT SENTRYGLAS INTERLAYERS * COMPACT DESIGN FOR MINIMAL OBSTRUCTION * COMPLETE WITH MOUNTING PLATE * FOR USE WITH 1/2" AND 3/4" (12 AND 19 mm) TEMPERED MONOLITHIC GLASS APPLICATIONS OR (13.52 & MM) USING DU PONT SENTRYGLAS INTERLAYERS * BRUSHED OR POLISHED 316 GRADE STAINLESS FINISHES AVAILABLE * DESIGNED FOR STEEL, WOOD, OR CONCRETE MOUNTING ATTACHMENT TOE OF STAIR OVERALL GLASS GUARDRAIL / HANDRAIL 5" [127.0 mm] CRL RS0B25 STANDOFF BRACKET & FITTINGS STANDARD GUARDRAIL 5" [127.0 mm] 36" [914.4 mm] STANDARD HANDRAIL STANDARD GUARDRAIL LINE OF MOUNTING SUBSTRATE NOSING LINE 60" [ mm] MAX RECOMMENDED TYPICAL STANDOFF GLASS RAIL ELEVATION TYPICAL SECTION RS0B25 w/ DOMED CAP & OVAL BACK PLATE TYPICAL STAIRS 2

3 Revisions By: CRL SRS STANDOFF RAILING SYSTEM CRL GLASS RAIL S RS0B2134 THESE HEAVY DUTY RAILING STANDOFFS ARE DESIGNED FOR GLASS HANDRAIL OR GUARDRAIL APPLICATION STANDARDS. THE SINGLE HAS A 2" (51 mm) DIAMETER x 1-3/4" (44 mm) STANDARD PROJECTION FROM THE INSTALLED ATTACHMENT POINT. CUSTOM LENGTHS AND DIAMETERS ARE ALSO AVAILABLE. IT COMES WITH A 3/8" - 16 x 2" (51 mm) ALLEN STUD FOR MOUNTING TO STEEL, ALONG WITH NECESSARY RUBBER WASHERS AND GROMMET. OTHER ATTACHMENT ANCHORS ARE ALSO AVAILABLE. (12 MM TO 19 MM) MONOLITHIC TEMPERED GLASS OR (13.52 & MM) LAMINATED TEMPERED GLASS USING DU PONT SENTRYGLAS INTERLAYERS * COMPACT DESIGN WITH BASE, CAP, AND MOUNTING STUD * FOR USE WITH 1/2" AND 3/4" (12 AND 19 mm) TEMPERED MONOLITHIC GLASS APPLICATIONS OR (13.52 & MM) USING DU PONT SENTRYGLAS INTERLAYERS. DO NOT USE WITH RAW OR ANNEALED GLASS * BRUSHED OR POLISHED 316 GRADE STAINLESS FINISHES AVAILABLE * DESIGNED FOR STEEL, ALUMINUM, AND CONCRETE SUBSTRATES TOE OF STAIR OVERALL GLASS GUARDRAIL / HANDRAIL 6" [ mm] 6" [ mm] OR AS DETAILED CRL RS0B2134 S 42" [ mm] STANDARD GUARDRAIL OR AS DETAILED 36" [914.4 mm] STANDARD HANDRAIL STANDARD GUARDRAIL LINE OF MOUNTING SUBSTRATE NOSING LINE TYPICAL STANDOFF GLASS RAIL ELEVATION TYPICAL SECTION RS0B2134 TYPICAL STAIRS 3

4 Revisions By: CRL SRS STANDOFF RAILING SYSTEM CRL GLASS RAIL S RS0B2135 w/ DOMED CAP THESE HEAVY DUTY RAILING STANDOFFS ARE DESIGNED FOR GLASS HANDRAIL OR GUARDRAIL APPLICATION STANDARDS. THE SINGLE VERSATILE FEATURES A 2-3/8" (60.3 MM) DIAMETER DOMED CAP WITH A THREADED 3/8" - 16 THREADED ROD TO SECURE THE GLASS PANEL. THE HAS A 2" (51 MM) DIAMETER x 1-3/4" (44 MM) STANDARD PROJECTION FROM THE INSTALLED ATTACHMENT POINT. CUSTOM LENGTHS AND DIAMETERS ARE ALSO AVAILABLE. IT COMES WITH A 3/8" - 16 x 2" (51 MM) ALLEN STUD FOR MOUNTING TO STEEL, ALONG WITH NECESSARY RUBBER WASHERS AND GROMMET. OTHER ATTACHMENT ANCHORS ARE ALSO AVAILABLE. (12 MM TO 19 MM) MONOLITHIC TEMPERED GLASS OR (13.52 & MM) LAMINATED TEMPERED GLASS USING DU PONT SENTRYGLAS INTERLAYERS * COMPACT DESIGN WITH BASE, CAP, AND MOUNTING STUD * FOR USE WITH 1/2" AND 3/4" (12 AND 19 mm) TEMPERED MONOLITHIC GLASS APPLICATIONS OR (13.52 & MM) USING DU PONT SENTRYGLAS INTERLAYERS. DO NOT USE WITH RAW OR ANNEALED GLASS * BRUSHED OR POLISHED 316 GRADE STAINLESS FINISHES AVAILABLE * DESIGNED FOR STEEL, ALUMINUM, AND CONCRETE SUBSTRATES TOE OF STAIR OVERALL GLASS GUARDRAIL / HANDRAIL OR AS DETAILED CRL RS0B2135 S STANDARD GUARDRAIL OR AS DETAILED 36" [914.4 mm] STANDARD HANDRAIL STANDARD GUARDRAIL LINE OF MOUNTING SUBSTRATE NOSING LINE 60" [ mm] MAX RECOMMENDED TYPICAL STANDOFF GLASS RAIL ELEVATION TYPICAL SECTION RS0B2135 TYPICAL STAIRS 4

5 SRS STANDOFF RAILING SYSTEM Revisions By: 3/8" (9.5 mm) MIN. THICK STEEL CHANNEL OR TUBE STEEL (BY OTHERS) (E) CONCRETE SLAB 9 1/4" [234.3] BACK PLATE 8" [203.2] BACK PLATE 2" [50.8] 4" [101.6] 2" [50.8] 3/8" [9.5] CRL RS0B20 ON STEEL SUBSTRATE 2 1/8" [53.7] 5" [127.0] 2 1/8" [53.7] 7/16" [11.7] 1 11/16" [42.2] (6) - 3/8" Ø SOCKET HEAD CAP SCREW CRL RS0B20 TUBE STEEL OR CHANNEL SUPPORT WITH 3/8" (9.5 MM) WALL OR WEB THICKNESS (BY OTHERS) (4) - 3/8" Ø FLAT HEAD S/S SCREW CRL RS0B25 2" [50.8] 4" [101.6] 2" [50.8] 2 1/8" [53.7] 5" [127.0] 2 1/8" [53.7] 3/8" [9.5] CRL RS0B20 ON WOOD SUBSTRATE 7/16" [11.7] 1 11/16" [42.2] 2" X 12" FASCIA BOARD (6) - 3/8" X 6" LAG BOLT CRL RS0B20 WOOD BLOCKING ANCHORED BETWEEN JOIST w/ (8) #10 X 3" SCREWS AT EACH END AT RIM JOISTS JOIST LOCATION 2" X 12" FASCIA BOARD (1) - 3/8" x 4" LONG S/S SLOTTED F.H. SCREW w/ NUT & WASHER CRL RS0B25 WOOD BLOCKING ANCHORED BETWEEN JOIST w/ (8) #10 X 3" SCREWS AT EACH END AT RIM JOISTS 9 1/4" [234.3] BACK PLATE 8" [203.2] BACK PLATE 2" [50.8] 4" [101.6] 2" [50.8] 2 1/8" [53.7] MIN. 5" [127.0] 2 1/8" [53.7] MIN. 3/8" [9.5] CRL RS0B20 ON CONCRETE SUBSTRATE 7/16" [11.7] 1 11/16" [42.2] CRL RS0B20 (6) - 3/8" x 3 3/4" CONCRETE ANCHOR CRL CA38X334 HILTI KBTZ BOLT (E) CONCRETE SLAB (4) - 3/8" X 4" LONG HILTI KWIK BOLTS COUNTERSUNK EXPANSION CRL EBA336 CRL RS0B25 Scale: AS NOTED CRL RS0B25 ON STEEL SUBSTRATE CRL RS0B25 ON WOOD SUBSTRATE CRL RS0B25 ON CONCRETE SUBSTRATE File Name: SRS.dwg 5

6 SRS STANDOFF RAILING SYSTEM Revisions By: 3/8" (9.5 mm) MIN. THICK STEEL CHANNEL OR TUBE STEEL (BY OTHERS) STEEL TUBE 1/4" MIN. WALL THICKNESS PER ENGINEER CALCULATIONS (E) CONCRETE SLAB 4" [101.6] MIN. (1) - 3/8"-16 x 2" LONG MOUNTING STUD DRILL & TAP STEEL FOR 3/8" FASTENER CRL RS0B2134 ENGINEER TO SPECIFY MIN. SPACING (1) - 3/8" x 4" THREADED ROD w/ NUT & WASHER CRL RS0B2134 4" [101.6] MIN. (1) - 3/8" x 3-3/4" CONCRETE ANCHOR CRL CA38X334 HILTI KBTZ BOLT CRL RS0B2134 CRL RS0B2134 ON STEEL CHANNEL SUBSTRATE CRL RS0B2134 ON STEEL TUBE SUBSTRATE CRL RS0B2134 ON CONCRETE SUBSTRATE 3/8" (9.5 mm) MIN. THICK STEEL CHANNEL OR TUBE STEEL (BY OTHERS) STEEL TUBE 1/4" MIN. WALL THICKNESS PER ENGINEER CALCULATIONS (E) CONCRETE SLAB 4" [101.6] MIN. (1) - 3/8"-16 x 2" LONG MOUNTING STUD DRILL & TAP STEEL FOR 3/8" FASTENER ENGINEER TO SPECIFY MIN. SPACING (1) - 3/8" x 4" THREADED ROD w/ NUT & WASHER 4" [101.6] MIN. (1) - 3/8" x 3-3/4" CONCRETE ANCHOR CRL CA38X334 HILTI KBTZ BOLT CRL RS0B2135 CRL RS0B2135 CRL RS0B2135 Scale: AS NOTED CRL RS0B2135 ON STEEL CHANNEL SUBSTRATE CRL RS0B2135 ON STEEL TUBE SUBSTRATE CRL RS0B2135 ON CONCRETE SUBSTRATE 6

7 SRS STANDOFF RAILING SYSTEM Revisions By: CUSTOMER NOTE: 3/8" [9.53] 1 3/4" [44.45] 4" [101.60] 3/8" X 6" LONG LAG BOLT 3/8" X 3 3/4" LONG CONC. ANCHOR CRL CA38X334 HILTI KBTZ BOLT 3/8" Ø x 3/4" LONG SOCKET HEAD CAP SCREW 7/16" [11.73] 1 11/16" [42.24] 4 1/4" [107.31] DURING INSTALLATION, LOCTITE MUST BE USED WHEN INSTALLING STANDOFF CAP (CRL TO SUPPLY) 3/8" X 4" LONG SLOTTED F.H. SCREW w/ NUT & WASHER 3/8" X 4" LONG HILTI KWIK BOLT COUNTERSUNK EXPANSION CRL EBA336 3/8" Ø x 1" LONG SOCKET HEAD CAP SCREW TOP VIEW MOUNTING BOLT OPTIONS TOP VIEW MOUNTING BOLT OPTIONS 4" [101.60] 4 1/4" [107.32] 1/2" 3" 1/2" 3/8" [9.53] 1 3/4" [44.45] 5/8" 3" 5/8" 7/16" [11.73] 1 11/16" [42.24] 8" [203.20] 1/2" 3 1/2" 4" [101.60] 9 1/4" [234.32] 3 1/2" 1/2" 2 1/8" 5" 2 1/8" 4" [101.60] 4 1/4" [107.32] FRONT VIEW SIDE VIEW RS0B20 STANDOFF ASSEMBLY WITH RECTANGULAR BACK PLATE 316 GRADE 1'-0" =1'-0" FRONT VIEW SIDE VIEW RS0B25 STANDOFF ASSEMBLY WITH DOMED CAP & OVAL BACK PLATE 316 GRADE 1'-0" =1'-0" 7

8 SRS STANDOFF RAILING SYSTEM Revisions By: CUSTOMER NOTES: 1. DURING INSTALLATION, LOCTITE MUST BE USED WHEN INSTALLING STANDOFF CAP (CRL TO SUPPLY) #2 #2 3/8" X 3 3/4" LONG CONC. ANCHOR CRL CA38X334 HILTI KBTZ BOLT 2. NOT RECOMMENDED FOR WOOD FASCIA ATTACHMENT EXCEPT FOR CASES WITH ENGINEER'S APPROVAL. FOR WOOD OR ALUMINUM FASCIA APPLICATIONS, ENGINEER TO SPECIFY MINIMUM HORIZONTAL & VERTICAL SPACING BETWEEN S AND TYPE OF MOUNTING FASTENERS TO BE USED. 3/8" X 3 3/4" LONG CONC. ANCHOR CRL CA38X334 HILTI KBTZ BOLT 1 3/4" [44.45] TOP VIEW #1 MOUNTING BOLT OPTIONS 1 3/4" [44.45] 3/8" X 3" LONG HANGER BOLT 3/8" X 2" LONG THREADED ROD #1 1 3/4" [44.45] 2 3/8" [60.28] TOP VIEW #1 MOUNTING BOLT OPTIONS 1 3/4" [44.45] 3/8" X 3" LONG HANGER BOLT 3/8" X 2" LONG THREADED ROD #1 #2 #2 FRONT VIEW SIDE VIEW FRONT VIEW SIDE VIEW RS0B GRADE 1'-0" =1'-0" RS0B2135 w/ DOMED CAP 316 GRADE 1'-0" =1'-0" 8

Fixings & Fastenings. Bright Zinc Plated, Galvanised & Stainless Steel. Lockinex. ea i, ea u i

Fixings & Fastenings. Bright Zinc Plated, Galvanised & Stainless Steel. Lockinex. ea i, ea u i Fixings & Fastenings Bright Zinc Plated, Galvanised & Stainless Steel Lockinex ea i, ea u i INTRODUCTION The Lockinex Range of Fixings & Fastenings are manufactured in Bright Zinc Plate, Hot dipped galvanised

More information

A-SL-1 A-SL-1 HAND RAIL STAIRS STRUCTURE/ ARCH SLIDE FOUNDATION 12" ROUND PIER 20" SQUARE PIER CAP DRILL AND EPOXY BOLTS *SEE FOUNDATION DETAILS

A-SL-1 A-SL-1 HAND RAIL STAIRS STRUCTURE/ ARCH SLIDE FOUNDATION 12 ROUND PIER 20 SQUARE PIER CAP DRILL AND EPOXY BOLTS *SEE FOUNDATION DETAILS 2X2 SQUARE TUBING /" WALL ON STRUCTURAL FRAME /8" WALL RAFTERS & INFILL NO. ISSUE HOUSE # GALVANIZED STEEL STAIRS SLIDE 2 GA SS POLISHED FINSHED LASER CUT FOUNDATION 2" ROUND PIER 20" SQUARE PIER CAP DRILL

More information

AUXILIARY FRAMING AND ACCESSORIES

AUXILIARY FRAMING AND ACCESSORIES CUSTOM CABINETS & RACKS STRUT AND ACCESSO- RIES JUNCTION KITS ANGLE AND BRACE KITS SPLICE KITS BRACE KITS INSTALLATION KITS WALL ANGLE KITS RUBBER END CAPS SUPPORT INSTALLATION AND SUPPORT KITS STANCHION

More information

2015 Feeney (8/15) # D. Aluminum Railing Systems

2015 Feeney (8/15) # D. Aluminum Railing Systems 2015 Feeney (8/15) #2012-425D Aluminum Railing Systems Aluminum Railing Systems Searching For a Complete Railing System? Look No Further. DesignRail by feeney aluminum railing frame systems combine the

More information

ATLANTIS RAIL Contact Information

ATLANTIS RAIL Contact Information ATLANTIS RAIL Contact Information Customer Service (800) 541-6829 (508) 732-9191 Spectrum System Installation Instructions Atlantis Rail s Spectrum System is an easy to install, universal cable railing

More information

2013 Feeney (2/14) # B. Aluminum Railing Systems

2013 Feeney (2/14) # B. Aluminum Railing Systems 2013 Feeney (2/14) #2012-425B Aluminum Railing Systems Aluminum Railing Systems Searching For a Complete Railing System? Look No Further. DesignRail by feeney aluminum railing frame systems combine the

More information

Horizontal Cable Systems

Horizontal Cable Systems ALUMINUM RAILING INSTALLATION INSTRUCTIONS v2012 orizontal Cable Systems 1) Check Contents Of Packages: Verify that all parts have arrived and that they match the packing list. 1A) Coastal applications:

More information

Vertical Offset Base and Safety Rail System Installation Instructions

Vertical Offset Base and Safety Rail System Installation Instructions Section 5 Vertical Offset Base and Safety Rail System Installation Instructions The vertical offset base and safety rail assembly are designed to be used in residential construction for sloped or flat

More information

Fastener Type Chart. Fastener Categories. Sheet Metal Screws Fully threaded screws with a point for use in sheet metal. Abbreviated SMS.

Fastener Type Chart. Fastener Categories. Sheet Metal Screws Fully threaded screws with a point for use in sheet metal. Abbreviated SMS. Fastener Categories Wood Screws Machine Screws Thread Cutting Machine Screws Screws with a smooth shank and tapered point for use in wood. Abbreviated WS. Screws with threads for use with a nut or tapped

More information

TREX POST MOUNT DECKING AND CONCRETE

TREX POST MOUNT DECKING AND CONCRETE TREX POST MOUNT DECKING AND CONCRETE for Pressure-treated Wood Framing LOCATION AND INSTALLATION OF POST MOUNTS IMPORTANT NOTES:» EACH POST MUST BE ATTACHED AS SHOWN TO ENSURE A CODE COMPLIANT AND SAFE

More information

Open Up Your View With CABLE SYSTEMS

Open Up Your View With CABLE SYSTEMS Open Up Your View With CABLE SYSTEMS PRESENTED BY CROWN HERITAGE Our Cable Multiple options to accomodate any deck or stair design Marine Grade 316 stainless steel Swaging is the term used for attaching

More information

3. Use base plate as template (see FIG. 4-1) to mark location for fasteners.

3. Use base plate as template (see FIG. 4-1) to mark location for fasteners. Plan the layout of the railing it is the beginning of a successful project. Getting Started... 1. Completely read the application instructions before starting the installation of the railing. 2. Properly

More information

CRL SPS SERIES - STACKING PARTITION SYSTEM EASY SLIDE - TWO SLIDING PANELS

CRL SPS SERIES - STACKING PARTITION SYSTEM EASY SLIDE - TWO SLIDING PANELS EASY SLIDE - TWO SLIDING PANELS TOP OR RAIL SEE SHEETS.0 &.0 FOR AVAILABLE SIZES AND FINISHES /" TEMPERED MONOLITHIC GLASS. SYSTEM ALSO AVAILABLE FOR /8" STANDARD TOP TRACK LLER 0" 0" /8"GAP.0 7/8" 7/8".0

More information

TO O L K IT. Public Bike Repair

TO O L K IT. Public Bike Repair TO O L K IT Public Bike Repair The Dero Tool Kit includes all the necessary tools to perform most routine maintenance and adjustments on most bikes. All the tools are securely fastened with stainless steel

More information

C.R. LAURENCE CO., INC.

C.R. LAURENCE CO., INC. C.R. LAURENCE CO., INC. GRS GLASS RAILING DRY GLAZE TAPER-LOC SYSTEM * *Patent Pending FOR TEMPERED GLASS APPLICATIONS Installation Instructions See the video at crlaurence.com TAPER-LOC Sets consist of

More information

Transmission Line Support Systems

Transmission Line Support Systems Antenna Support Bracket for transmission line The Antenna Support Bracket angle mounts directly to a 4-1/2" (114 mm) OD antenna pipe mount or tower leg. This is ideal for supporting transmission line runs

More information

Straight Stringer Installation Instructions

Straight Stringer Installation Instructions Straight Stringer Installation Instructions Floor-to-Wall Installation F L I G H T P L A N Unpack: What s included? Your Stringer Tread Screws (8) per tread (1) Torque Wrench (1) Socket (for the brackets

More information

#4 Phillips Driver Bit 1/8, 4mm, 5.5mm & 8mm (5/16 ) Allen Wrench. Safety Glasses

#4 Phillips Driver Bit 1/8, 4mm, 5.5mm & 8mm (5/16 ) Allen Wrench. Safety Glasses ATLANTIS RAIL Contact Information: Atlantis Rail Systems 70 Armstrong Road 3900 Civic Center Drive Plymouth, MA 02360 North Las Vegas, NV 89030 (800) 541-6829 or (508) 732-9191 (508) 732-9798 www.atlantisrail.com

More information

ALUMINUM RAILING INSTALLATION INSTRUCTIONS. 1) Check Contents Of Packages: Verify that all parts have arrived and that they match the packing list.

ALUMINUM RAILING INSTALLATION INSTRUCTIONS. 1) Check Contents Of Packages: Verify that all parts have arrived and that they match the packing list. ALUMINUM RAILING INSTALLATION INSTRUCTIONS AF#2010-308A Glass Infill Systems 1) Check Contents Of Packages: Verify that all parts have arrived and that they match the packing list. 2) Gather and Identify

More information

BRIDGE RAILING, 4 TUBE B-26-F POST DETAILS MICHIGAN DEPARTMENT OF TRANSPORTATION

BRIDGE RAILING, 4 TUBE B-26-F POST DETAILS MICHIGAN DEPARTMENT OF TRANSPORTATION \ ƒ" x 1 " SLOTTED HOLE IN POST AND \ ƒ"! HOLE IN RAIL \ "! x 6" SLOTTED ROUND HEAD BOLTS, WITH 1 PLATE WASHER, 1 LOCK WASHER AND HEX. NUT \ ƒ" x 1 " SLOTTED HOLE IN POST AND \ ƒ"! HOLE IN RAIL \ "! x

More information

SECTION R507 DECKS DECKING LEDGER BOARD BEAM. FOOTING BEAM SPAN CANTILEVER For SI: 1 inch = 25.4 mm FIGURE R507.2 DECK CONSTRUCTION

SECTION R507 DECKS DECKING LEDGER BOARD BEAM. FOOTING BEAM SPAN CANTILEVER For SI: 1 inch = 25.4 mm FIGURE R507.2 DECK CONSTRUCTION SECTION R507 DECKS R507.1 Application. The provisions of this section shall provide prescriptive requirements for the design and construction of all uncovered, wood-framed, single-span exterior decks.

More information

ALUMINUM RAILING INSTALLATION INSTRUCTIONS. 1) Check Contents Of Packages: Verify that all parts have arrived and that they match the packing list.

ALUMINUM RAILING INSTALLATION INSTRUCTIONS. 1) Check Contents Of Packages: Verify that all parts have arrived and that they match the packing list. ALUMINUM RAILING INSTALLATION INSTRUCTIONS AF#2010-308D Glass Infill Systems 1) Check Contents Of Packages: Verify that all parts have arrived and that they match the packing list. 2) Gather and Identify

More information

Flooring Nails 6-D Flooring Nails $3.40 / 1# 6-D Flooring Nails $14.50 / 5# 8-D Flooring Nails $3.40 / 1# 8-D Flooring Nails $14.

Flooring Nails 6-D Flooring Nails $3.40 / 1# 6-D Flooring Nails $14.50 / 5# 8-D Flooring Nails $3.40 / 1# 8-D Flooring Nails $14. Nails Nails Drywall Screws Common Nails 4D Common Nails $3.85 / 1# 6D Common Nails $3.00 / 1# 6D Common Nails $74.25 / 50# 8D Common Nails $3.00 / 1# 8D Common Nails $74.25 / 50# 10D Common Nails $3.00

More information

M-RAIL Sismet Road, Mississauga, L4W 1V6 TEST REPORT FOR MLEVEL GUARD SYSTEMS

M-RAIL Sismet Road, Mississauga, L4W 1V6 TEST REPORT FOR MLEVEL GUARD SYSTEMS M-RAIL 1625-9 Sismet Road, Mississauga, L4W 1V6 TEST REPORT FOR MLEVEL GUARD SYSTEMS Report of mechanical load testing of the metal stand-off system for compliance with the applicable requirements of the

More information

Level Railing. Installation Guide. v2.5 W W W. S O L U T I O N S A L U M I N U M. C O M

Level Railing. Installation Guide. v2.5 W W W. S O L U T I O N S A L U M I N U M. C O M Level Railing Installation Guide Top Rail Bottom Rail Aluminum Baluster 2x Bottom Bracket 1x Rail Support #909915 Kit Includes: 1 - Top Rail (with Baluster Connectors installed) 1 - Bottom Rail (with Baluster

More information

ATLANTIS RAIL Contact Information: Atlantis Rail Systems 70 Armstrong Road 3900 Civic Center Drive Plymouth, MA North Las Vegas, NV 89030

ATLANTIS RAIL Contact Information: Atlantis Rail Systems 70 Armstrong Road 3900 Civic Center Drive Plymouth, MA North Las Vegas, NV 89030 ATLANTIS RAIL Contact Information: Atlantis Rail Systems 70 Armstrong Road 3900 Civic Center Drive Plymouth, MA 02360 North Las Vegas, NV 89030 (800) 541-6829 or (508) 732-9191 (508) 732-9798 www.atlantisrail.com

More information

IMPORTANT -- SPECIAL INSTALLATION INSTRUCTIONS

IMPORTANT -- SPECIAL INSTALLATION INSTRUCTIONS IMPORTANT -- SPECIAL INSTALLATION INSTRUCTIONS ** READ ALL INSTALLATION INSTRUCTIONS BEFORE STARTING!** If at any point, you have questions, call 1-800-851-0865...(The manufacturer will not be responsible

More information

Installation Instructions 3520WW/3520WWB Handrail

Installation Instructions 3520WW/3520WWB Handrail Important 1. Acclimate materials 24 hrs before installation. Maintain temperature controlled environment after installation 2. Install in accordance with manufacturer s installation instructions. Failure

More information

11 6 Round Building Assembly Instructions

11 6 Round Building Assembly Instructions 11 6 Round Building Assembly Instructions 11 6 Round Building Hardware List 1. Pro Rib Brite White 36 Wide X 68 Long (Siding Steel) 11 2. Top Wall Wheel Ring 3 3. Base Ring 3 4. 1 ½ X 68 Aluminum Tubes

More information

CSS Central Mount System

CSS Central Mount System CSS-20 Installation Manual CSS-20 Safety Notifications Below are the installation instructions for the CSS-20-2 Long Span Beam Mounting System. Please read these safety notifications prior to beginning

More information

ATI Evaluation Service A Division of Architectural Testing Certification Services

ATI Evaluation Service A Division of Architectural Testing Certification Services ATI Evaluation Service A Division of Architectural Testing Certification Services Subject to Renewal: 10/13/2016 Issued: 12/17/2014 Visit www.ati-es.com for current status Revised: 06/05/2015 Page 1 of

More information

ALL SEASON PATIO COVER

ALL SEASON PATIO COVER ALL SEASON PATIO COVER 61 Where the All Season Patio Cover is to be attached to the home, create a level line showing where the top of the mounting rail is to be located. Install each section with the

More information

SLIDING DOORS DIRECT ROLLER

SLIDING DOORS DIRECT ROLLER SLIDING DOORS Single door fixed to wall NFK s Direct Sliding Door system, for installation to a solid wall. Height adjustable track supports can be quickly mounted to a wall allowing the glass to pass

More information

RAILING R A IL ING 51

RAILING R A IL ING 51 RAILING RAILING 5 TREX TRANSCEND RAILING NOTES:» TREX TRANSCEND RAILINGS ARE DESIGNED TO BE INSTALLED OVER THE DECKING FRAME OR ON INSIDE OF RIM JOIST. NOTCHING OF PRESSURE-TREATED POSTS OR POSTS INSTALLED

More information

installation care & maintenance instructions lifecycledecking.com 25-year limited residential warranty 20-year limited commercial warranty

installation care & maintenance instructions lifecycledecking.com 25-year limited residential warranty 20-year limited commercial warranty installation care & maintenance instructions lifecycledecking.com 25-year limited residential warranty 20-year limited commercial warranty Installation Instructions As with any building project, use proper

More information

Stainless SHS stanchions with glass infill and offset handrail

Stainless SHS stanchions with glass infill and offset handrail Stainless SHS stanchions with glass infill and offset handrail design elements C4 Min 180 100 40 Min 1000mm 100 100 Stainless SHS stanchions with glass infill and offset handrail C4 design Stainless steel

More information

Leveling Feet, Base Plates and Casters

Leveling Feet, Base Plates and Casters Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.

More information

DECKS. Stairway illumination Positive attachment of ledger Lateral load connection required board (R507.2) required (R ) (R311.7.

DECKS. Stairway illumination Positive attachment of ledger Lateral load connection required board (R507.2) required (R ) (R311.7. DECKS Max. riser height-7 ¾ Min. tread depth-10 Landings required at (R311.7.5.1) (R311.7.5.2) top and bottom of stairs (R311.7.6) Notched guardrail post NOT allowed Graspable handrail required Spacing

More information

Fastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength

Fastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength Fastener Basics Common Fastener Types Fastener Grade (US) or Class (metric) refers to the mechanical properties of the fastener material. Generally, a higher number indicates a stronger, more hardened

More information

800-753-9688 sales@novadisplay.com www.novadisplay.com 6.0mm Rod Fixings Components 6mm Basic Rod Fixings RAS TOP/BOTTOM FIXINGS FOR ROD - Includes Spring Tensioner, top/ceiling and bottom/floor fixings

More information

2x Bottom Bracket. 1x Rail Support STEP 1 STEP 2

2x Bottom Bracket. 1x Rail Support STEP 1 STEP 2 Level Railing Top Rail Bottom Rail Aluminum Baluster 2x Bottom Bracket 1x Rail Support Kit Includes: 1 - Top Rail (with Baluster Connectors installed) 1 - Bottom Rail (with Baluster Connectors installed)

More information

Double Beam Freestanding Pergola Installation Guide

Double Beam Freestanding Pergola Installation Guide Double Beam Freestanding Pergola Installation Guide Patent Pending. Copyright 2011 USAVinyl, LLC - All Rights Reserved The information contained in these instructions are proprietary to USAVinyl, LLC and

More information

Bezdan Stainless. Frameless Glass Railing. Baluster Railing EXCEPTIONAL DESIGN AND FUNCTION

Bezdan Stainless. Frameless Glass Railing. Baluster Railing EXCEPTIONAL DESIGN AND FUNCTION Bezdan Stainless EXCEPTIONAL DESIGN AND FUNCTION Bezdan offers frameless and baluster glass railing systems that deliver a high end result with exceptional design and function for everyday applications.

More information

APPLICATION FOR A BUILDING PERMIT

APPLICATION FOR A BUILDING PERMIT APPLICATION FOR A BUILDING PERMIT City of San Jacinto 595 S. San Jacinto Ave San Jacinto CA 92583 95.487.7330 fax 95.654.9896 Must print legibly, submit (3) sets of building and plot plans. Fill out all

More information

B-27-A BRIDGE RAILING, 3 TUBE WITH PICKETS SECTION THROUGH RAILING WITH BRUSH BLOCK SECTION THROUGH RAILING WITH SIDEWALK

B-27-A BRIDGE RAILING, 3 TUBE WITH PICKETS SECTION THROUGH RAILING WITH BRUSH BLOCK SECTION THROUGH RAILING WITH SIDEWALK 3" 1'- ƒ " 11 " 7 " TOP OF REAR FLANE TO BE ROUND 2'- LON PICKET 1'- W6 x 25 1 " THICK BASE PLATE " " ELASTOMERIC BOUND FABRIC PAD 8" SLAB DETAIL A (SEE 3) OVERHAN SECTION THROUH RAILIN WITH BRUSH BLOCK

More information

Lateral Support. Decks over 24 above grade require lateral support* *Exceptions to be discussed later

Lateral Support. Decks over 24 above grade require lateral support* *Exceptions to be discussed later Lateral Support Decks over 24 above grade require lateral support* *Exceptions to be discussed later Decking Types of Decking: -2x4s & 2x6s -five quarter span rated decking boards -Wood plastic composite

More information

CODE TUBE SIZE WALL THICKNESS DEGREE FINISH STAINLESS STEEL RADIUS CENTER

CODE TUBE SIZE WALL THICKNESS DEGREE FINISH STAINLESS STEEL RADIUS CENTER TUBING BALUSTRADE FITTINGS TUBING DIAMETER WALL FINISH TUBE SIZE WALL THICKNESS DEGREE FINISH * Stainless Steel 316 - Mirror Polish 90 DEGREE SS-TUBE-316-25 25.4mm 1.5mm 6000mm MIRROR SS-TUBE-316-38 38.1mm

More information

TIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter

TIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 TIRE RACK INSTALLATION INSTRUCTIONS 07-11 Dodge Sprinter Please read before beginning Stainless steel hardware may bind together

More information

Steel Strong-Wall Shearwall Installations

Steel Strong-Wall Shearwall Installations Steel Strong-Wall Shearwall Installations Connector Training for Contractors Series Name: (800) 999-5099 www.strongtie.com Industry Terms Steel Strong-Wall Every day we work hard to earn your business,

More information

STRUCTURAL ATTACHMENTS

STRUCTURAL ATTACHMENTS Brace Structural Attachment Selection Procedure ) Determine structure to be attached to from the following: A) Concrete B) Wood Beam C) Structural Steel 2) Reference structure connection type from Appendix

More information

INSTALLATION INSTRUCTIONS Aluminum Railing System

INSTALLATION INSTRUCTIONS Aluminum Railing System INSTALLATION INSTRUCTIONS FASCIA MOUNT SURFACE MOUNT OFFSET BASE SURFACE MOUNT STANDARD BASE CORE MOUNT Ø3" [Ø76 mm] 3 2 1 " [89 mm] 1 4 1 " [32 mm] 2 8 7 " [73 mm] 200 SERIES 300 SERIES 3 3 4 " [95 mm]

More information

1.1 SUMMARY. A. This Section includes the following: 1. Loose steel lintels. 2. Shelf angles. 3. Metal floor plate. 4. Pipe bollards.

1.1 SUMMARY. A. This Section includes the following: 1. Loose steel lintels. 2. Shelf angles. 3. Metal floor plate. 4. Pipe bollards. PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Loose steel lintels. 2. Shelf angles. 3. Metal floor plate. 4. Pipe bollards. B. See Division 5 Section "Pipe and Tube Railings"

More information

Installation Instructions

Installation Instructions EZ Launch Accessible Transfer System Installation Instructions Models 500900L, 500900R, 500901L, 500901R 500890, 500906L, 500906R For questions about features, operation/performance, parts, accessories

More information

KOLO SHELTER Installation Instructions Parts List

KOLO SHELTER Installation Instructions Parts List Parts List Roof Cap Rafter Upright Polycarbonate Polycarbonate Drop Polycarbonate Flange Center Weldment (Short length shown above) Polycarbonate Edge Bolt.25 x 6.5 Bolt.625 x 7.5 Threaded Rod.75 x 14

More information

HOW TO INSTALL HORIZONTAL ROD RAILING TREX SIGNATURE STANDARD

HOW TO INSTALL HORIZONTAL ROD RAILING TREX SIGNATURE STANDARD HOW TO INSTALL HORIZONTAL ROD RAILING NOTES:» Adjust drill power to lowest setting that will drive screw. DO NOT OVER TORQUE 36 STAINLESS STEEL STAINLESS FASTENERS.» NEVER use impact tools on 36 Stainless

More information

A - Railing Frame Material Specifications

A - Railing Frame Material Specifications A - Railing Frame Material Specifications NOTE: We strongly recommend stainless steel for exterior applications. R-1 8/1/02 B Stainless Steel Spacers (For Horizontal Railing Double Post End Post using

More information

Horizontal Cable Systems

Horizontal Cable Systems ALUMINUM RAILING INSTALLATION INSTRUCTIONS Horizontal Cable Systems 1) Check Contents Of Packages: Verify that all parts have arrived and that they match the packing list. 1A) Coastal applications: Confirm

More information

WADE 2-1. Universal Carrier. Exclusive Features of 400 Series Universal Carrier for Lavatories, Urinals, Drinking Fountains.

WADE 2-1. Universal Carrier. Exclusive Features of 400 Series Universal Carrier for Lavatories, Urinals, Drinking Fountains. Universal Carrier Exclusive Features of 400 Series Universal Carrier for Lavatories, Urinals, Drinking Fountains. The 400 series carrier accommodates most urinal, water-cooler or hanger plate lavatory

More information

ALUMINUM PIPE GUIDERAIL 01/01/

ALUMINUM PIPE GUIDERAIL 01/01/ NOTES PIPE RAILING & POSTS: Structural Tube, Pipe and Bar shall be in accordance with ASTM B22 or ASTM B429, Alloy 606-T6. End Rail 90 bends and corner bends with maximum 4-0" post spacing, may be Alloy

More information

Installation Instructions

Installation Instructions Please read all instructions before installing Installation Instructions Important 1. Acclimate materials 24 hrs before installation. Maintain temperature controlled environment after installation 2. Install

More information

STEEL PIPE GUIDERAIL 01/01/

STEEL PIPE GUIDERAIL 01/01/ NOTES PIPE RAILING & POSTS: Pipe Rails and s shall be in accordance with ASTM A5 Grade B for standard weight pipe and ASTM A500 Grade B, C or D or ASTM A50 for structural tube. Bars for handrail supports

More information

GlideRite Retractable Cover System For Hot Spot Spas (SE & SLX only)

GlideRite Retractable Cover System For Hot Spot Spas (SE & SLX only) List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.

More information

Factory Assistance: Phone: Fax: Page 1

Factory Assistance: Phone: Fax: Page 1 CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)

More information

Midwest Roadside Safety Facility

Midwest Roadside Safety Facility 28 Spaces @ 75"=2100" 100' 3:1 Cut 40' 75" (TYP.) 3:1 Soil Cut 3:1 1 2 3 4 5 6 7 8 9 10 25 12 13 11 14 15 16 17 18 19 20 21 22 23 24 25 26 75" 300" or Two 12'-6" Section End Section 300" or Two 12'-6"

More information

RLP Flat Track Hardware sliding door hardware/ barn door track

RLP Flat Track Hardware sliding door hardware/ barn door track Page 1 of 9 Installation Suggestions for: RLP Flat Track Hardware sliding door hardware/ barn door track Read these instructions to end before starting installation or ordering hardware. Reclaimed Lumber

More information

Beautiful balustrades DESIGNER FRAMELESS GLASS BALUSTRADES & POOL FENCES

Beautiful balustrades DESIGNER FRAMELESS GLASS BALUSTRADES & POOL FENCES Beautiful balustrades DESIGNER FRAMELESS GLASS BALUSTRADES & POOL FENCES CUBOID FACE-FIXED BALUSTRADE A discreet and invisibly fixed system for attaching glass balustrades and pool fencing without disturbing

More information

NX8 SERIES 6-1/4 HANDRAIL W/ VINYL HANDGRIP

NX8 SERIES 6-1/4 HANDRAIL W/ VINYL HANDGRIP 6-1/4 HANDRAIL W/ VINYL HANDGRIP TYPICAL ASSEMBLY 5 2 BUTT JOINT 12 10 9 1 8 11 6 3 7 4 BUTT JOINT COMPONENT LIST 1 LEFT RETURN 7 UPPER IMPACT ABSORBER 2 RIGHT RETURN 8 LOWER IMPACT ABSORBER 3 OUTSIDE

More information

Midwest Roadside Safety Facility

Midwest Roadside Safety Facility 28 Spaces @ 75"=175'-0" 100'-0" 3:1 Cut 40'-0" 6'-3" (TYP.) 3:1 Soil Cut 3:1 1 2 3 4 5 6 7 8 9 10 25 12 13 11 14 15 16 17 18 19 20 21 22 23 24 25 26 6'-3" 25'-0" or Two Section 12-gauge End Section 25'-0"

More information

Assembly Instructions

Assembly Instructions Jury Base Seating January 2014 - Floor Anchor Specifications / 4 5 / 16 (4)½ diameter holes 1/ 4 2 4 8 #12.750.KIT4 1 5 / Hilti 4 KH-EZx2/ 8 Max. Torque: 18 ft/lbs punch clearance hole in carpet before

More information

Midwest Roadside Safety Facility

Midwest Roadside Safety Facility 28 Spaces @ 75"=175'-0" 6'-3" (TYP.) 8'-0" Soil Cut 1 2 3 4 5 6 7 8 9 10 12 13 11 14 15 16 17 18 19 20 21 22 23 24 25 25 C.I.P. 26 6'-3" 25'-0" or Two Section End Section 25'-0" or Two Section End Section

More information

HOW TO INSTALL HORIZONTAL ROD RAILING TREX SIGNATURE STANDARD

HOW TO INSTALL HORIZONTAL ROD RAILING TREX SIGNATURE STANDARD HOW TO INSTALL HORIZONTAL ROD RAILING NOTES:» Adjust drill power to lowest setting that will drive screw. DO NOT OVER TORQUE 6 STAINLESS STEEL STAINLESS FASTENERS.» NEVER use impact tools on 6 Stainless

More information

GlideRite Retractable Cover System For HotSpring & Tiger River Spas (except Classic & pre-2000 Landmark Spas)

GlideRite Retractable Cover System For HotSpring & Tiger River Spas (except Classic & pre-2000 Landmark Spas) List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.

More information

SECTION FOLDING GLASS PANEL PARTITIONS

SECTION FOLDING GLASS PANEL PARTITIONS SECTION 10 22 26.35 FOLDING GLASS PANEL PARTITIONS USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED FOLDING GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY, MOUNTING BRACKETS, MOUNTING

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS SHOWER DOOR KIT ALUMINUM 2503 E. Vernon Avenue, Los Angeles, CA 90058-1826 Phone: (800) 421-6144 EXT. 7740 Fax: (800) 458-7496 crlaurence.com Email: showers@crlaurence.com 11M0260

More information

Comparable ISO Standard. Date of current standard/modified

Comparable ISO Standard. Date of current standard/modified Title Standard All-metal prevailing torque All-metal prevailing torque EN ISO EN ISO Comparable ISO Standard Date of current standard/modified 980 7042 27042 7042 1998-02 980 10513 30513 10513 1998-02

More information

Plug sockets. page 15. Assembly instructions. page 2-3 Assembly material. page 4-6 Insertable parts. page 7-14

Plug sockets. page 15. Assembly instructions. page 2-3 Assembly material. page 4-6 Insertable parts. page 7-14 CONTENTS Introduction New colours version: PP-A-14-ENG PERFOPLUG BASE Plug sockets. page 1 Assembly instructions. page 2-3 Assembly material. page 4-6 Insertable parts. page 7-14 PERFOPLUG PREMIUM Plug

More information

Mast Solutions Document/Installation Manual

Mast Solutions Document/Installation Manual Mast Solutions Document/Installation Manual The Mast family from Veritas is the perfect answer to movable and stationery partitions and room dividers, and hinged doors. This system is extremely versatile

More information

Chalk Line. #4 Phillips Driver Bit. Cable Cutters

Chalk Line. #4 Phillips Driver Bit. Cable Cutters ATLANTIS RAIL Contact Information: Atlantis Rail Systems 70 Armstrong Road 3900 Civic Center Drive Plymouth, MA 02360 North Las Vegas, NV 89030 (800) 541-6829 or (508) 732-9191 (508) 732-9798 www.atlantisrail.com

More information

Installation Instructions

Installation Instructions Important 1. Acclimate materials 24 hrs before installation. Maintain temperature controlled environment after installation 2. Install in accordance with manufacturer s installation instructions. Failure

More information

FLOE DOCK STEPS FOR ROLL-IN AND SECTIONAL DOCKS

FLOE DOCK STEPS FOR ROLL-IN AND SECTIONAL DOCKS FLOE DOCK STEPS FOR ROLL-IN AND SECTIONAL DOCKS ASSEMBLY INSTRUCTIONS KIT P/N 510-2000-00 -STEP KIT P/N 510-2010-00 6-STEP KIT P/N 510-2016-00 8-STEP MULTIPLE PINCH POINTS KEEP HANDS & FEET CLEAR OF ALL

More information

Installation Instructions 2000/2000W/G Handrail

Installation Instructions 2000/2000W/G Handrail Important 1. Acclimate materials 24 hrs before installation. Maintain temperature controlled environment after installation 2. Install in accordance with manufacturer s installation instructions. Failure

More information

Titan Series Awning Assembly and Installation Instructions

Titan Series Awning Assembly and Installation Instructions Titan Series Awning Assembly and Installation Instructions Be sure to use safety glasses when assembling and installing the awning. Some metal parts may have sharp edges. Use work gloves to handle them.

More information

32 Gallon Perforated Square Receptacle

32 Gallon Perforated Square Receptacle 32 Gallon Perforated Square Receptacle 992-031 24 5/" 24 5/" 39 1/2" 30 1/2" ITEM NO. PART NUMBER DESCRIPTION QTY. 1 653-006 Receptacle Base 1 2 653-045 32 Gallon Perforated Side 4 3 653-011 Arch Lid 1

More information

Accessories. Module clamps. TTModule clamps 22. TTSelf-drilling wood screw, flange head 24. TTSelf-tapping hexagon screw with sealing washer 24

Accessories. Module clamps. TTModule clamps 22. TTSelf-drilling wood screw, flange head 24. TTSelf-tapping hexagon screw with sealing washer 24 Accessories TTModule clamps 22 TTSelf-drilling wood screw, flange head 24 TTSelf-tapping hexagon screw with sealing washer 24 TTT-bolt and flange nuts with serration 24 TTMK2 slot nuts with assembly clip

More information

Sturdi-Wall Design Manual for SW46, SW66, SW63, SW64, SW60, SW83, SW84, and SW80 Models

Sturdi-Wall Design Manual for SW46, SW66, SW63, SW64, SW60, SW83, SW84, and SW80 Models Sturdi-Wall Design Manual for SW46, SW66, SW63, SW64, SW60, SW83, SW84, and SW80 Models Project Number ME086-05 by Brent Leatherman, P.E. Timber Tech Engineering, Inc E-Mail: bl@timbertecheng.com January

More information

Ready To Go SimpleSpec tm. Installation Manual. For more information, please visit 3-form.com or call

Ready To Go SimpleSpec tm. Installation Manual. For more information, please visit 3-form.com or call Contents Overview ( 1) 3/8" Varia Panel = Cable Tensioner with Cover Plate KIT Stainless Steel: 3-15-1636-K Black Oxide: 3-15-2005-K Cable Tensioner with Cover Plate SS: 3-15-1636 BO: 3-15-2005 + M8 Thread

More information

Installation Instructions Kit, Base Rail Bracket Part # 31413

Installation Instructions Kit, Base Rail Bracket Part # 31413 Installation Instructions Kit, Base Rail Bracket Part # 31413 Dealer / Installer: Provide a copy of these Instructions to the end user of this product. These Instructions provide important operating and

More information

Concealed Thru-Roof Assemblies

Concealed Thru-Roof Assemblies Concealed Thru-Roof Assemblies IPC s concealed thru-roof assembly is ideal for new constructions or applications where installation will be concealed. The 240 assembly includes everything necessary for

More information

WALL TO FABRICATED FLOOR

WALL TO FABRICATED FLOOR WALL TO FABRICATED FLOOR PERIMETER WALL IS HELD IN PLACE BY WOODEN STRIP SCREED OPTIONAL NSF COVED FLOOR IS SHOWN PARTITION WALL IS HELD IN PLACE BY WOODEN STRIP SCREED OPTIONAL NSF COVED FLOOR IS SHOWN

More information

REVIEW ALL INSTRUCTIONS COMPLETELY BEFORE ATTEMPTING INSTALLATION

REVIEW ALL INSTRUCTIONS COMPLETELY BEFORE ATTEMPTING INSTALLATION INSTALLATION INSTRUCTIONS Service Doors, Counter Service Doors & Grilles REVIEW ALL INSTRUCTIONS COMPLETELY BEFORE ATTEMPTING INSTALLATION GENERAL NOTES: Instructions are intended for qualified door mechanics

More information

Handrail Installation. Paramount Cable Railing Systems 49 Stokes Drive Carson City, NV

Handrail Installation. Paramount Cable Railing Systems 49 Stokes Drive Carson City, NV Handrail Installation Paramount Cable Railing Systems 49 Stokes Drive Carson City, NV 89721 775.887.1077 NVPIH@AOL.COM Handrail Installation Figure 1: Separate posts, fasteners, and hardware. Check against

More information

Universal flat-panel mount

Universal flat-panel mount I N S T A L L A T I O N M A N U A L Universal flat-panel mount www.christiedigital.com PM 2004/ REV 02 Contents - Assembly drawing - Fine tune tilt adjustments - Parts list - Installing the adapter plate

More information

COMPOSITE RAILING INSTALLATION

COMPOSITE RAILING INSTALLATION COMPOSITE RAILING INSTALLATION Tools All you ll need is a hammer and screw gun, circular saw (carbidetipped blade with fewer than 20 teeth is recommended), level, tape measure, rasp and blue chalk line.

More information

MX8 SERIES 6-1/4 HANDRAIL W/ VINYL HANDGRIP

MX8 SERIES 6-1/4 HANDRAIL W/ VINYL HANDGRIP 6-1/4 HANDRAIL W/ VINYL HANDGRIP TYPICAL ASSEMBLY 5 2 BUTT JOINT 12 10 9 1 8 11 6 3 7 4 BUTT JOINT COMPONENT LIST 1 LEFT RETURN 7 UPPER IMPACT ABSORBER 2 RIGHT RETURN 8 LOWER IMPACT ABSORBER 3 OUTSIDE

More information

M4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information

M4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information Handles & Light Duty PA 20 1 Assembly of Hinge M4x8 FHCS [24-208-4] M4 T-Nut 20 [20-044] M4 Hex Nut [24-706-4] 60 300-0 PA 20 on panel 2 Hinge positions 3-4 Clearance dimensions 5 Range of swing FOR M4

More information

INSTALLATION INSTRUCTIONS VENETIAN 84" SLIDING SHOWER DOOR SYSTEM (180º INSTALLATION)

INSTALLATION INSTRUCTIONS VENETIAN 84 SLIDING SHOWER DOOR SYSTEM (180º INSTALLATION) INSTALLATION INSTRUCTIONS VENETIAN 84" SLIDING SHOWER DO SYSTEM (180º INSTALLATION) 28539 Industry Drive, Valencia, CA 91355 Toll Free Phone: (877) 728-3874 Toll Free Fax: (888) 440-9567 Phone: (661) 775-1675

More information

Installation Instructions 800/800W/855/G2-800 Continuous Bracket Handrails

Installation Instructions 800/800W/855/G2-800 Continuous Bracket Handrails Important 1. Acclimate materials 24 hrs before installation. Maintain temperature controlled environment after installation 2. Install in accordance with manufacturer s installation instructions. Failure

More information

Template. Blue 242. May 2018 trademarks of Suncor Stainless, Inc. Loctite is a registered trademark of Henkel Corporation

Template. Blue 242. May 2018 trademarks of Suncor Stainless, Inc. Loctite is a registered trademark of Henkel Corporation ATLANTIS RAIL Contact Information: Atlantis Rail Systems 70 Armstrong Road 3900 Civic Center Drive Plymouth, MA 02360 North Las Vegas, NV 89030 (800) 541-6829 or (508) 732-9191 (508) 732-9798 www.atlantisrail.com

More information

Tape Measure Carpenter s Square Touch-up Paint Chalk Line. Blue 242. Template

Tape Measure Carpenter s Square Touch-up Paint Chalk Line. Blue 242. Template ATLANTIS RAIL Contact Information: Atlantis Rail Systems 70 Armstrong Rd. Plymouth, MA 02360 (800) 541-6829 or (508) 732-9191 (508) 732-9798 www.atlantisrail.com NOVA System Installation Instructions The

More information

C.R. LAURENCE CO., INC.

C.R. LAURENCE CO., INC. C.R. LAURENCE CO., INC. GRS GLASS RAILING DRY GLAZE TAPER-LOC SYSTEM * FOR LAMINATED TEMPERED GLASS APPLICATIONS Installation Instructions *U.S. Patent Numbers 8,122,654 & 8,201,366 and Commonwealth of

More information