evolution fasteners (uk) ltd product guide v7

Transcription

1 evolution fasteners (uk) ltd product guide v7 T: +44(0) F: +44(0) E:

2 Evolution Fasteners are a leading manufacturer and distributor of fixing products. Founded in Canada, today we operate in Europe and North America. We have a commitment to distributors, working in partnership with them to provide an outstanding service to the construction industry. We actively support our partners in distribution with our ever expanding product ranges and various additional services. Our ISO 9001 registration means that you are assured that all our products meet or exceed the performance and installation standards demanded by the industry. Our Sales Team has many years of combined experience in various sectors of the construction industry and continually strives to offer the best, most knowledgeable service and quality products for today s demanding construction needs. We are available to give technical advice, stock details and pricing information from 8.30 am to 5.30 pm, Monday to Friday. Our delivery system ensures that orders placed before 3.00pm will be delivered next day Nationwide and within a few days to mainland Europe. Ask For Evolution Introduction Other areas in which we offer our distributors assistance include Marketing and Technical Support. Our Marketing Support is available to any distributor interested in using our promotional material to promote Evolution products to their customers. We can adapt our artwork to your specification, including logos, contact details and prices if required. Please contact us for further information. Evolution Technical Support is also available to our distributors. If any Evolution product requires technical back up, a member of our team will be on hand to support the product, give application advice or test the mechanical properties of the fixing in its environment. Throughout the Evolution organisation we are committed to providing our customers with the highest levels as regards both product and professional service. Our friendly staff respond to requests or enquiries promptly and efficiently. If your experience falls short of this commitment, please contact our Customer Services Manager at our Sales Office. See contact details on the back cover of this product guide. (This catalogue provides only advice without obligation. Additional information and precise application advice can be provided on request, and is subject to local conditions and materials. Box and carton quantities may vary). Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk

3 Contents Tek Screws Bi-metal Page Composite Panel Fasteners Page Fibrous Cement Board Screws Page Gash Point Page Heating & Ventilation Screws Page 30 Hex Head Page Hex Washer Head Page Metal Framing Page 30 Stainless Steel Page 31 Stitching Screws Page Wing-Drill Page Zinc Coated Page Drywall Screws Cementitious Board Screws Page Coarse Thread - Black Phosphate Page Fine Thread - Black Phosphate Page Fine Thread - Zinc Page 4-5 Reverse Thread Drywall Screws Page Self-Drill Drywall Screws Page 6-7 Self-Drill Drywall Screws Wafer/Pan Head Page 8-9 Stainless Steel Drywall Screws Page Tough Board Screws Page Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk Page 1

4 Contents Collated Screws Collated Drywall Screws - Coarse Thread Black Phosphate Page Collated Drywall Screws - Fine Thread Black Phosphate Page Collated Drywall Screws - Fine Thread Zinc Page Collated Flooring Screws & System Page Collated Self-Drill Drywall Screws Page Concrete Screws Page Masonry Screws Countersunk Head Masonry Screws Page Slotted Head Masonry Screws Page 41 Decking Screws Page 63 Drill & Drive Bits Bit holders Page 56 Drive Kits Page 56 Drive Sockets Page 56 Extended Screwdriver Insert Bits Page 56 PGM Approved SDS Plus Drill Bits Page 57 Screwdriver Insert Bits Page 57 SDS Plus Drill Bits Page Page 2 Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk

5 Contents Light Anchors Ceiling Anchors Page 48 Hammerfix Page Insulation Fixings Page Metal Nail-Ins Page Stainless Steel Hammerfix Page Wirehangers Page 48 Medium/Heavy Anchors Anchorbolts Page Drop In Anchors Page 54 Accessories Clips & Brackets Page 55 Mesh, Tapes & Sealants Page Tek Colour Caps Page 62 Washers Page 62 TM About Evoshield TM Coating Page 64 Terms & Conditions of Sale Page 65 Sales Tel: +44(0) F: +44(0) E: Page 3

6 DWSZ25 Premium Zinc Drywall Screw 3.5 x 25mm Max. Board Thickness (mm): 15 Box Qty: 1,000 / Carton Qty: 10,000 Intermediate thread suitable for fixing to track and timber Ask For Evolution Drywall Screws Fine Thread Zinc DWSZ32 Premium Zinc Drywall Screw 3.5 x 32mm Max. Board Thickness (mm): 22 Box Qty: 1,000 / Carton Qty: 10,000 DWSZ38 Premium Zinc Drywall Screw 3.5 x 38mm Max. Board Thickness (mm): 28 Box Qty: 1,000 / Carton Qty: 10,000 DWSZ42 Premium Zinc Drywall Screw 3.5 x 42mm Max. Board Thickness (mm): 32 Box Qty: 1,000 / Carton Qty: 10,000 DWSZ50 Premium Zinc Drywall Screw 3.5 x 50mm Max. Board Thickness (mm): 40 Box Qty: 1,000 / Carton Qty: 10,000 Plasterboard Metal Track DWSZ65 Premium Zinc Drywall Screw 4.2 x 65mm Max. Board Thickness (mm): 55 Box Qty: 500 / Carton Qty: 5,000 DWSZ75 Premium Zinc Drywall Screw 4.2 x 75mm Max. Board Thickness (mm): 65 Box Qty: 500 / Carton Qty: 5,000 DWSZ90 Premium Zinc Drywall Screw 4.8 x 90mm Max. Board Thickness (mm): 80 Box Qty: 500 / Carton Qty: 3,000 WHDZ13 Wafer Head Drywall Screw 4.2 x 13mm Box Qty: 1,000 Carton Qty: 10,000 Intermediate thread suitable for fixing to track and timber Intermediate thread suitable for fixing to track and timber Intermediate thread suitable for fixing to track and timber DWSZ100 Premium Zinc Drywall Screw 4.8 x 100mm Max. Board Thickness (mm): 90 Box Qty: 500 / Carton Qty: 3,000 DWSZ125 Premium Zinc Drywall Screw 4.8 x 125mm Max. Board Thickness (mm): 115 Box Qty: 250 / Carton Qty: 2,500 DWSZ150 Premium Zinc Drywall Screw 4.8 x 150mm Max. Board Thick (mm): 140 Box Qty: 200 Carton Qty: 2,000 Page 4 Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk

7 Drywall Screws Fine Thread Zinc Designed for fixing plasterboard to metal studs up to 1mm. Manufactured to exceed ASTM C standards Designed to drill through 1mm of steel in 0.5 seconds Stick fit gives push fit on to drywall screwdriver bit. Pro Tip Use a power screwdriver with 4,000-6,000rpm. Deep Phillips recess reduces dropped or misaligned screws, providing fast and efficient fastening. Drywall Screws/ Fine Thread Zinc Bugle head design for application versatility gives a flush countersink with no paper tearing. Manufactured from C1022 grade steel (premium quality) with bright zinc plating. Thread configuration ensures clean, smooth, low torque installation for maximum holding power. Super sharp point dimples steel at point of contact providing wobble-free and therefore quicker installation. Super strong packaging designed for easy stock taking and less damage and wastage on site. Premium screwdriver insert bit provided in plastic bag at top of every box. See also: Collated Drywall Screws (p.16-21) All Evolution Drywall Screws are CE marked and comply with BS EN Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk Page 5

8 Drywall Screws Self-Drill Drywall Screws DWSDZ25 Self-Drilling Drywall Screw 3.5 x 25mm Max. Board Thickness (mm): 12 DWSDZ32 Self-Drilling Drywall Screw 3.5 x 32mm Max. Board Thickness (mm): 15 Plasterboard Metal Track DWSDZ35 Self-Drilling Drywall Screw 3.5 x 35mm Max. Board Thickness (mm): 20 Box Quantity: 1,000 / Carton Quantity: 8,000 DWSDZ38 Self-Drilling Drywall Screw 3.5 x 38mm Max. Board Thickness (mm): 20 DWSDZ42 Self-Drilling Drywall Screw 3.5 x 42mm Max. Board Thickness (mm): 25 DWSDZ45 Self-Drilling Drywall Screw 3.5 x 45mm Max. Board Thickness (mm): 25 Box Quantity: 1,000 / Carton Quantity: 6,000 DWSDZ50 Self-Drilling Drywall Screw 3.5 x 50mm Max. Board Thickness (mm): 35 DWSDZ65 Self-Drilling Drywall Screw 4.2 x 65mm Max. Board Thickness (mm): 50 Box Quantity: 500 / Carton Quantity: 5,000 DWSDZ75 Self-Drilling Drywall Screw 4.2 x 75mm Max. Board Thickness (mm): 60 Box Quantity: 500 / Carton Quantity: 5,000 DWSDZ100 Self-Drilling Drywall Screw 4.8 x 100mm Max. Board Thickness (mm): 85 Box Quantity: 500 / Carton Quantity: 3,000 DWSDZ125 Self-Drilling Drywall Screw 4.8 x 125mm Max. Board Thickness (mm): 110 Box Quantity: 250 / Carton Quantity: 2,500 Page 6 Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk

9 Drywall Screws Self-Drill Drywall Screws Designed for fixing plasterboard to heavier gauge metal section (up to 2.5mm). Manufactured to exceed ASTM C standards Bugle head design for application versatility gives a flush countersink with no paper tearing. Stick fit gives push fit on to drywall screwdriver bit. Pro Tip Use a power screwdriver with 2,000-3,000rpm. Deep Phillips recess reduces dropped or misaligned screws, providing fast and efficient fastening. Drywall Screws/Self-Drill Drywall Screws Thread configuration ensures clean, smooth, low torque installation; fully formed for maximum holding power. Super strong packaging designed for easy stock taking and less damage and wastage on site. Steel C1022 with electroplated zinc to 3µ. Self-drill point recommended for use on metal section up to 2.5mm, giving fast and consistent drilling times. Premium screwdriver insert bit provided in plastic bag at top of every box. All Evolution Drywall Screws are CE marked and comply with BS EN See also: Collated Self-Drill Drywall Screws (p.22-23) Self-Drill Drywall Screws - Wafer Head (p.8-9) Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk Page 7

10 Drywall Screws Self-Drill Drywall Screws Wafer Head WHSDZ12 Self-Drilling Drywall Screw - Wafer Head 4.2 x 12mm Box Quantity: 1,000 Carton Quantity: 10,000 WHSDZ19 Self-Drilling Drywall Screw - Wafer Head 4.2 x 19mm Box Quantity: 1,000 Carton Quantity: 10,000 Metal Stud TSLP Self-Drilling Drywall Screw - Low Profile Wafer Head 4.8 x 22mm Box Quantity: 500 Carton Quantity: 8,000 Metal Track WHSDZ25 Self-Drilling Drywall Screw - Wafer Head 4.2 x 25mm Box Quantity: 1,000 Carton Quantity: 10,000 WHSDZ50 Self-Drilling Drywall Screw - Wafer Head 4.8 x 50mm Box Quantity: 500 Carton Quantity: 5,000 WHSDZ75 Self-Drilling Drywall Screw - Wafer Head 4.8 x 75mm Box Quantity: 300 Carton Quantity: 3,000 Self-Drill Drywall Screws Pan Head PHSDZ12 Self-Drilling Drywall Screw - Pan Head 3.9 x 12mm Box Quantity: 1,000 Carton Quantity: 10,000 Page 8 Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk

11 Drywall Screws Self-Drill Drywall Screws Wafer/Pan Head Designed for the assembly of drywall track and ceiling track systems. Manufactured to exceed ASTM C standards Thread configuration ensures clean, smooth, low torque installation; fully formed for maximum holding power. Case hardened carbon steel. Deep, stick-fit, Phillips recess, reduces dropped or misaligned screws, providing fast, efficient fastening. Pro Tip Change your drive bit after every box. Superior corrosion protection to ensure long term fastener integrity. Electroplated zinc. Drywall Screws/Self-Drill Drywall Screws Wafer/Pan Head Super hard and sharp drill tips ensure fast drill times. Super strong packaging designed for easy stock taking and less damage and wastage on site. Premium screwdriver insert bit provided in plastic bag at top of every box. See also: Metal Framing Tek Screws (p.30) Sales Tel: +44(0) F: +44(0) E: Page 9

12 DWSC25 (3.5 x 25mm) Coarse Thread Drywall Screw Box Quantity: 1,000 Carton Quantity: 10,000 Ask For Evolution Drywall Screws Coarse Thread Black Phosphate DWSC32 (3.5 x 32mm) Coarse Thread Drywall Screw Box Quantity: 1,000 Carton Quantity: 10,000 DWSC35 (3.9 x 35mm) Coarse Thread Drywall Screw Box Quantity: 1,000 Carton Quantity: 8,000 Fine thread screws have diminished holding power as wood dries (see above). Our coarse thread drywall screws have fewer threads and require fewer revolutions, therefore giving a faster installation time. They have deeper threads to give superior holding power (see below). Fibres are pulled up during installation. As wood dries the natural tendency of wood fibres is to spring back to their original position. Wood pulls the screws inwards, eliminating head pops. DWSC38 (3.5 x 38mm) Coarse Thread Drywall Screw Box Quantity: 1,000 Carton Quantity: 10,000 DWSC42 (3.5 x 42mm) Coarse Thread Drywall Screw Box Quantity: 1,000 Carton Quantity: 10,000 DWSC45 (3.9 x 45mm) Coarse Thread Drywall Screw Box Quantity: 1,000 Carton Quantity: 10,000 DWSC50 (3.5 x 50mm) Coarse Thread Drywall Screw Box Quantity: 1,000 Carton Quantity: 10,000 DWSC65 (4.2 x 65mm) Coarse Thread Drywall Screw Box Quantity: 500 Carton Quantity: 5,000 DWSC75 (4.2 x 75mm) Coarse Thread Drywall Screw Box Quantity: 500 Carton Quantity: 5,000 Page 10 Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk

13 Drywall Screws Coarse Thread Black Phosphate Designed for fixing plasterboard to timber studs. Manufactured to exceed ASTM C standards Bugle head design for application versatility gives a flush countersink with no paper tearing. Coarse thread screws have nine threads per inch to give greater grab in timber, as opposed to standard drywall screws which have seventeen threads per inch. All Evolution Drywall Screws are CE marked and comply with BS EN Pro Tip Use in timber to eliminate pop ups. Deep Phillips recess reduces dropped or misaligned screws, providing fast and efficient fastening. Stick fit gives push fit on to drywall screwdriver bit, which reduces dropped or misaligned screws meaning less wastage. Drywall Screws/Coarse Thread Black Phosphate Thread configuration ensures rapid advancement when fixing to timber. Deeper thread diameter of mm to give greater hold in timber. Super strong packaging designed for easy stock taking and less damage and wastage on site. C1018 steel with 48 hour salt spray tested black phosphate coating. Premium screwdriver insert bit provided in plastic bag at top of every box. IMPORTANT APPLICATION ADVICE On rare occasions black phosphate screw coatings can react with some render types, which can damage the coating resulting in corrosion and staining. To reduce the risk of this happening Evolution recommends sealing the drywall screw heads with a PVA bonding solution before render is applied. See also: Coarse Collated Drywall Screws Black Phosphate (p.18-19) Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk Page 11

14 Drywall Screws Fine Thread Black Phosphate DWSP25 (3.5 x 25mm) Fine Thread Drywall Screw Metal Track DWSP32 (3.5 x 32mm) Fine Thread Drywall Screw Plasterboard DWSP35 (3.5 x 35mm) Fine Thread Drywall Screw Box Quantity: 1,000 / Carton Quantity: 8,000 DWSP38 (3.5 x 38mm) Fine Thread Drywall Screw DWSP42 (3.5 x 42mm) Fine Thread Drywall Screw DWSP45 (3.5 x 45mm) Fine Thread Drywall Screw Box Quantity: 1,000 / Carton Quantity: 6,000 DWSP50 (3.5 x 50mm) Fine Thread Drywall Screw DWSP65 (4.2 x 65mm) Fine Thread Drywall Screw Box Quantity: 500 / Carton Quantity: 5,000 DWSP75 (4.2 x 75mm) Fine Thread Drywall Screw Box Quantity: 500 / Carton Quantity: 5,000 Page 12 Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk

15 Drywall Screws Fine Thread Black Phosphate Designed for fixing plasterboard to metal studs up to 1mm. Bugle head design for application versatility gives a flush countersink with no paper tearing. Manufactured from C1018 grade steel (premium quality) with 48 hour salt spray tested black phosphate coating. Thread configuration ensures clean, smooth, low torque installation for maximum holding power. Super sharp point dimples steel at point of contact providing wobble-free and therefore quicker installation. Pro Tip Use a power screwdriver with rpm. All Evolution Drywall Screws are CE marked and comply withbs EN Deep Phillips recess reduces dropped or misaligned screws, providing fast and efficient fastening. Stick Fit gives push fit on to drywall screwdriver bit, which reduces dropped or misaligned screws - less wastage. Drywall Screws/Fine Thread Black Phosphate Premium screwdriver insert bit provided in plastic bag at top of every box. Super strong packaging designed for easy stock taking and less damage and wastage on site. IMPORTANT APPLICATION ADVICE On rare occasions black phosphate screw coatings can react with some render types, which can damage the coating resulting in corrosion and staining. To reduce the risk of this happening Evolution recommends sealing the drywall screw heads with a PVA bonding solution before render is applied. See also: Fine Collated Drywall Screws Black Phosphate (p.20-21) Tough Board Screws (p.14-15) Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk Page 13

16 Drywall Screws Cementitious Board Screws WHL08114 Cementitious Board Screw (Hi/Lo) 4.2 x 32mm Head Style: Wafer Csk PH2 Steel Thickness (mm): Box Quantity: 200 / Carton Quantity: 4,800 WHL08158 Cementitious Board Screw (Hi/Lo) 4.2 x 42mm Head Style: Wafer Csk PH2 Steel Thickness (mm): Box Quantity: 200 / Carton Quantity: 4,800 WHP08114 Cementitious Board Screw (Self-drill) 4.2 x 32mm Head Style: Wafer Csk PH2 Steel Thickness (mm): Box Quantity: 200 / Carton Quantity: 4,800 WHP08158 Cementitious Board Screw (Self-drill) 4.2 x 42mm Head Style: Wafer Csk PH2 Steel Thickness (mm): Box Quantity: 200 / Carton Quantity: 4,800 Tough Board Screws F35 Tough Board Screw 3.9 x 35mm F45 Tough Board Screw 3.9 x 45mm IMPORTANT APPLICATION ADVICE On rare occasions black phosphate screw coatings can react with some render types, which can damage the coating resulting in corrosion and staining. To reduce the risk of this happening Evolution recommends sealing the drywall screw heads with a PVA bonding solution before render is applied. Reverse Thread Drywall Screws DWRT x 32mm Effective Thread Length: Fully threaded Drill point: Sharp / Head style: Countersunk Box Qty: 1,000 / Carton Qty: 10,000 DWRT x 42mm Effective Thread Length: Fully threaded Drill point: Sharp / Head style: Countersunk Box Qty: 1,000 / Carton Qty: 10,000 Stainless Steel Drywall Screws SSDW x 42mm Effective Thread Length: Fully threaded Drill point: Tek 2 / Head style: Countersunk Box Qty: 200 / Carton Qty: 4,800 Page 14 Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk

17 Designed for fixing cementitious boards and sheathing to track/timber. Countersunk nibs will act to lessen reaction stresses in the substrate material. Super strong neck eliminates head snap. Grey 500hr rated Evoshield TM coating gives high performing corrosion protection, setting standards for surface hardness and integrity. Spoon point and hi-lo threadform give rapid advancement. Pro Tip For light steel use the hi-lo thread screw. Countersunk nibs ensure flush finish even in very dense board environments. High grade, medium carbon steel (C1022). Self-drilling, fine thread for use in track from 0.8 to 2.5mm. See also: Screwdriver Insert Bits (p.57) Wing-Drill Tek Screws (p.28-29) Reduced width head Designed for fixing dense and hard surfaced boards to both drywall track and timber base materials. Also for use in flooring. Stick fit Phillips no. 2 recess Self-countersinking nibs Countersunk head and reverse thread compress board material to lessen debris escape. Designed for fixing plasterboard to drywall track and timber in humid atmospheres. Ask For Evolution Drywall Screws Cementitious Board Screws Tough Board Screws Black phosphate coating Reverse Thread Drywall Screws Designed for fixing dense plasterboard to drywall track and timber. Electroplated zinc for added corrosion resistance Edge cutting ring to avoid tearing board surface Stainless Steel Drywall Screws Manufactured from A410 stainless steel for ultimate corrosion resistance. Pro Tip Ideal for fixing marine ply to track or timber. See also: Collated Flooring Screws (p.22-23) Super sharp point for drilling through up to 1.0mm mild steel Coarse, hi-lo thread for rapid advancement in track or timber. Self-drilling point for use in 0.8mm - 2.5mm track. Countersunk head with nibs to ensure flush finish. Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk Page 15 Drywall Screws/Cementitious Board Screws, Tough Board Screws, Reverse Thread & Stainless Steel Drywall Screws

18 Collated Screws Drywall Screws Fine Thread Zinc CDWFZ25 Collated Fine Thread Drywall Screw - Zinc 3.5 x 25mm Max. Board Thickness (mm): 15 CDWFZ32 Collated Fine Thread Drywall Screw - Zinc 3.5 x 32mm Max. Board Thickness (mm): 22 CDWFZ35 Collated Fine Thread Drywall Screw - Zinc 3.5 x 35mm Max. Board Thickness (mm): 25 CDWFZ38 Collated Fine Thread Drywall Screw - Zinc 3.5 x 38mm Max. Board Thickness (mm): 28 CDWFZ42 Collated Fine Thread Drywall Screw - Zinc 3.5 x 42mm Max. Board Thickness (mm): 30 CDWFZ45 Collated Fine Thread Drywall Screw - Zinc 3.5 x 45mm Max. Board Thickness (mm): 35 CDWFZ50 Collated Fine Thread Drywall Screw - Zinc 3.5 x 50mm Max. Board Thickness (mm): 40 CDWFZ55 Collated Fine Thread Drywall Screw - Zinc 3.5 x 55mm Max. Board Thickness (mm): 45 CDWFZ75 Collated Fine Thread Drywall Screw - Zinc 3.9 x 75mm Max. Board Thickness (mm): 65 Box Quantity: 500 / Carton Quantity: 5,000 Page 16 Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk

19 Collated Screws Drywall Screws Fine Thread Zinc Designed for fixing plasterboard to metal studs of mm. Manufactured to exceed ASTM C standards Bugle head design for application versatility gives a flush countersink with no paper tearing. Pro Tip Use a power screwdriver with 4,000-6,000rpm. Double pre-sorted screws ensure 100% usability and no wasted screws. Collated Screws/Drywall Screws Fine Thread Zinc Thread configuration ensures clean, smooth, low torque installation for maximum holding power. Manufactured from C1022 grade steel (premium quality) with bright zinc plating to 3µ. Super sharp point dimples steel at point of contact providing wobble-free and therefore quicker installation. All Evolution Drywall Screws are CE marked and comply with BS EN Super strong packaging designed for easy stock taking and less damage and wastage on site. See also: PH Extended Screwdriver Insert Bit 2 (p.56) Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk Page 17

20 Collated Screws Drywall Screws Coarse Thread Black Phosphate CDWCP25 Collated Drywall Screw - Coarse Black 3.5 x 25mm CDWCP32 Collated Drywall Screw - Coarse Black 3.5 x 32mm CDWCP35 Collated Drywall Screw - Coarse Black 3.5 x 35mm CDWCP38 Collated Drywall Screw - Coarse Black 3.5 x 38mm CDWCP42 Collated Drywall Screw - Coarse Black 3.5 x 42mm CDWCP45 Collated Drywall Screw - Coarse Black 3.5 x 45mm CDWCP50 Collated Drywall Screw - Coarse Black 3.5 x 50mm CDWCP55 Collated Drywall Screw - Coarse Black 3.5 x 55mm CDWCP65 Collated Drywall Screw - Coarse Black 3.9 x 65mm Box Quantity: 500 / Carton Quantity: 5,000 CDWCP75 Collated Drywall Screw - Coarse Black 4.2 x 75mm Box Quantity: 500 / Carton Quantity: 5,000 Page 18 Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk

21 Collated Screws Drywall Screws Coarse Thread Black Phosphate Designed for fixing plasterboard to timber studs. Manufactured to exceed ASTM C standards Bugle head design for application versatility gives a flush countersink with no paper tearing. Coarse thread screws have nine threads per inch to give greater grab in timber, as opposed to standard drywall screws which have seventeen threads per inch. Super strong packaging designed for easy stock taking and less damage and wastage on site. All Evolution Drywall Screws are CE marked and comply with BS EN Super sharp S point provides wobble free and therefore quicker installation. Pro Tip Use coarse thread in timber to prevent pop ups. Double pre-sorted screws ensure 100% usability and no wasted screws. C1018/22 steel with 48 hour salt spray tested black phosphate coating. Deeper thread diameter of mm to give greater hold in timber. Collated Screws/Drywall Screws Coarse Thread Black Phosphate IMPORTANT APPLICATION ADVICE Fibres are pulled up during installation. As wood dries, the natural tendency of wood fibres are to spring back to their original position. Wood pulls screw inwards, eliminating head pop-ups. On rare occasions black phosphate screw coatings can react with some render types, which can damage the coating resulting in corrosion and staining. To reduce the risk of this happening Evolution recommends sealing the drywall screw heads with a PVA bonding solution before render is applied. See also: PH Extended Screwdriver Insert Bit 2 (p.56) Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk Page 19

22 Collated Screws Drywall Screws Fine Thread Black Phosphate CDWFP25 Collated Drywall Screw - Fine Black 3.5 x 25mm CDWFP32 Collated Drywall Screw - Fine Black 3.5 x 32mm CDWFP35 Collated Drywall Screw - Fine Black 3.5 x 35mm CDWFP42 Collated Drywall Screw - Fine Black 3.5 x 42mm CDWFP45 Collated Drywall Screw - Fine Black 3.5 x 45mm CDWFP50 Collated Drywall Screw - Fine Black 3.5 x 50mm CDWFP55 Collated Drywall Screw - Fine Black 3.5 x 55mm Page 20 Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk

23 Collated Screws Drywall Screws Fine Thread Black Phosphate Designed for fixing plasterboard to metal studs up to 1mm. All Evolution Drywall Screws are CE marked and comply with BS EN Bugle head design for application versatility gives a flush countersink with no paper tearing. Thread configuration ensures clean, smooth, low torque installation for maximum holding power. IMPORTANT APPLICATION ADVICE On rare occasions black phosphate screw coatings can react with some render types, which can damage the coating resulting in corrosion and staining. To reduce the risk of this happening Evolution recommends sealing the drywall screw heads with a PVA bonding solution before render is applied. Super sharp point dimples steel at point of contact providing wobble free and therefore quicker installation. Double pre-sorted screws ensure 100% usability and no wasted screws. C1018/22 steel with 48 hour salt spray tested black phosphate coating. Collated Screws/Drywall Screws Fine Thread Black Phosphate Manufactured to exceed ASTM C standards Super strong packaging designed for easy stock taking and less damage and wastage on site. See also: PH Extended Screwdriver Insert Bit 2 (p.56) Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk Page 21

24 Collated Screws Self-Drill Drywall Screws CDWFDZ25 Collated Self-Drilling Drywall Screw 3.5 x 25mm Drive: PH2 Max. Board Thickness (mm): 15 CDWFDZ35 Collated Self-Drilling Drywall Screw 3.5 x 35mm Drive: PH2 Max. Board Thickness (mm): 20 CDWFDZ45 Collated Self-Drilling Drywall Screw 3.5 x 45mm Drive: PH2 Max. Board Thickness (mm): 30 CDWFDZ50 Collated Self-Drilling Drywall Screw 3.5 x 50mm Drive: PH2 Max. Board Thickness (mm): 35 Flooring Screws CFSCYS45 Collated Flooring Screw - Yellow Passivated 4.2 x 45mm Drive: Square CFSCYS55 Collated Flooring Screw - Yellow Passivated 4.2 x 55mm Drive: Square Flooring System P-SFC51E Collated Sub-Flooring Screws 4.2 x 51mm Drive: PAMDrive Modified Torx CFT110 (110v Collated Flooring Tool) PAM Collated Flooring Adaptor with Makita FS2500 Motor P-SFC64E Collated Sub-Flooring Screws 4.2 x 64mm Drive: PAMDrive Modified Torx P-SFC75E Collated Sub-Flooring Screws 4.8 x 75mm Drive: PAMDrive Modified Torx MAKITA FS2500 Cable Length: 4m Net Weight: 1.6kg No Load Speed: rpm Torque Settings: 17/29Nm Screw Capacity: 6mm Drive Shank Hex: 1/4 Input Wattage: 570w Vibration K Factor: 1.5m/sec 2 Noise Sound Power: 94 db(a) Noise Sound Pressure: 83 db(a) Vibration No Load: 2.5m/sec 2 Noise K Factor: 3 db(a) Page 22 Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk

25 Collated Screws Self-Drill Drywall Screws Designed for fixing plasterboard to heavier gauge drywall track section (up to 2.5mm). Bugle head design for application versatility gives a flush countersink with no paper tearing. Thread configuration ensures clean, smooth, low torque installation for maximum holding power. Super strong packaging designed for easy stock taking and less damage and wastage on site. Evolution collation consistency eliminates jamming. Flooring Screws Evolution split threadform design prevents jacking of the material being fixed down. Manufactured in steel with yellow passivated coating. Self-countersinking nibs under the head of the screw ensure a flush finish in all materials. Flooring System Manufactured from C1022 or C1018 grade steel (premium quality) with bright zinc plating to 3µ. #2 drill point recommended for use on metal section up to 2.5mm. Faster and more consistent drilling times. Square drive ensures positive driving and reduces bit wear. Pro Tip Use a power screwdriver with 2,000-4,000rpm. Double pre-sorted screws ensure 100% usability and no wasted screws. Manufactured to exceed ASTM C standards Designed for fixing flooring materials to timber. Super strong packaging designed for easy stock taking, less damage and wastage on site. All Evolution Drywall Screws are CE marked and comply with BS EN Collated Screws/Self-Drill Drywall Screws, Flooring Screws & Flooring System Designed for fixing sheet flooring materials to timber. The PAM Professional Autofeed Screw System is a contractor-tough, reliable, easy to use, and versatile system that will help you increase productivity, improve quality and reduce expensive callbacks. Unique drive profile ensures low bit wear and eliminates wobble. Drive Split threadform design prevents jacking of the material being fixed down. Collation consistency eliminates jamming. Manufactured in steel with yellow zinc passivated coating. Sharp single thread design specifically for chipboard flooring. Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk Page 23

26 TSHW (4.8 x 16mm) Effective Thread Length (mm): 8 Drill Point: # 3 / Head Style: 5/16 Hex Box Qty: 500 / Carton Qty: 10,000 Ask For Evolution Tek Screws Hex Head for Light Steel ( DIN 7504) Also available in stainless steel. See page 32 - BMHH TSHW (5.5 x 25mm) Effective Thread Length (mm): 16 Drill Point: # 3 / Head Style: 5/16 Hex Box Qty: 500 / Carton Qty: 7,000 TSHW (5.5 x 32mm) Effective Thread Length (mm): 24 Drill Point: # 3 / Head Style: 5/16 Hex Box Qty: 200 / Carton Qty: 4,800 Also available in stainless steel. See page 32 - BMHH Also available in stainless steel. See page 32 - BMHH TSHW (5.5 x 38mm) Effective Thread Length (mm): 30 Drill Point: # 3 / Head Style: 5/16 Hex Box Qty: 200 / Carton Qty: 4,800 TSHW (5.5 x 50mm) Effective Thread Length (mm): 42 Drill Point: # 3 / Head Style: 5/16 Hex Box Qty: 100 / Carton Qty: 1,400 Also available in stainless steel. See page 32 - BMHH TSHW (5.5 x 32mm) Effective Thread Length (mm): 12 Drill Point: # 5 / Head Style: 5/16 Hex Box Qty: 100 / Carton Qty: 2,400 TSHW (5.5 x 75mm) Effective Thread Length (mm): 66 Drill Point: # 3 / Head Style: 5/16 Hex Box Qty: 100 / Carton Qty: 1,400 Hex Head for Heavy Steel ( DIN 7504) TSHW (5.5 x 100mm) Effective Thread Length (mm): 90 Drill Point: # 3 / Head Style: 5/16 Hex Box Qty: 100 / Carton Qty: 1,400 Also available in stainless steel. See page 33 - BMHH TSHW (5.5 x 38mm) Effective Thread Length (mm): 18 Drill Point: # 5 / Head Style: 5/16 Hex Box Qty: 100 / Carton Qty: 2,400 Also available in stainless steel. See page 33 - BMHH TSHW (5.5 x 50mm) Effective Thread Length (mm): 30 Drill Point: # 5 / Head Style: 5/16 Hex Box Qty: 100 / Carton Qty: 2,400 TSHW (5.5 x 75mm) Effective Thread Length (mm): 55 Drill Point: # 5 / Head Style: 5/16 Hex Box Qty: 100 / Carton Qty: 1,400 TSHW (5.5 x 100mm) Effective Thread Length (mm): 80 Drill Point: # 5 / Head Style: 5/16 Hex Box Qty: 100 / Carton Qty: 1,400 Page 24 Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk

27 Tek Screws Hex Head SuperTek for Extra Heavy Steel TSHW (5.5 x 50mm) Effective Thread Length (mm): 25 Drill Point: #7 / Head Style: 5/16 Hex Box Qty: 100 / Carton Qty: 1,400 TSHW (6.3 x 60mm) Effective Thread Length (mm): 32 Drill Point: #8 / Head Style: 5/16 Hex Box Qty: 100 / Carton Qty: 1,000 Tek Screws/Hex Head Designed for fastening liner panels and general components to steel. SuperTek products are designed for use as an alternative to shot-fire in extra thick steels up to 22mm thick. Pro Tip Change the drive socket every 500 screws. Manufactured in accordance with BS EN ISO 9,000:2,000 Hex/flange head design provides sure clamping action. Silver Evoshield TM coating with 500hr salt spray rating. Evolution precision formed head ensures stable driving characteristics. High grade, medium carbon steel (C1022) helps prevent head snap. Aggresive threadform design ensures consistent tapping and superb holding power. Super hard, super sharp drill tips ensure fast drill times. Precision formed concave fluting ensures speedy chip removal. Ultimate Load Screw Thread Drill Point Steel Thickness Diameter 1.2mm 1.6mm 2.0mm 2.5mm 3.0mm 4.0mm 5.0mm 6.0mm 4.8mm Coarse Tek 3 2.0kN 2.6kN 4.0kN 5.8kN 6.5kN mm Coarse Tek 3 2.5kN 3.4kN 4.8kN 7.0kN 8.1kN mm Fine Tek 5 2.5kN 3.4kN 4.8kN 7.0kN 8.1kN 9.5kN 11.2kN 14.1kN 5.5mm Fine Tek kN 15.79kN 6.3mm Coarse Tek kN 19.28kN * Site testing recommended Mechanical Performance Screw Diameter Tensile Shear 4.8mm 9.0kN 6.4kN 5.5mm (Coarse) 11.0kN 8.1kN 5.5mm (Fine) 14.2kN 9.2kN Pull Test Note Beyond 6mm embedment into base steel, the deciding factor is the tensile performance of the fastener. Tests were performed in steel, yield tested at ( mm) 340N/mm 2 and ( ) 485N/mm 2. Full product technical information is available from our product datasheets which can be requested from our Sales Office or downloaded from our website See also: Magnetic Drive Socket (p.56) Washers (p.62) Hex Washer Head Tek Screws (p.26-27) Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk Page 25

28 Also available in stainless steel. See page 32 - BMBW Ask For Evolution Tek Screws Hex Washer Head for Light Steel ( DIN 7504) TSBW (5.5 x 32mm) Effective Thread Length (mm): 21 / Washer Ø (mm): 16 Head Style (washered): 5/16 Hex Box Qty: 250 / Carton Qty: 3,000 TSBW (5.5 x 26mm) Effective Thread Length (mm): 10 / Washer Ø (mm): 16 Head Style (washered): 5/16 Hex Box Qty: 250 / Carton Qty: 3,500 Also available in stainless steel. See page 32 - BMBW Also available in stainless steel. See page 32 - BMBW TSBW (5.5 x 38mm) Effective Thread Length (mm): 27 / Washer Ø (mm): 16 Head Style (washered): 5/16 Hex Box Qty: 250 / Carton Qty: 3,000 TSBW (5.5 x 50mm) Effective Thread Length (mm): 38 / Washer Ø (mm): 16 Head Style (washered): 5/16 Hex Box Qty: 100 / Carton Qty: 1,400 Page 26 Also available in stainless steel. See page 33 - BMBW Also available in stainless steel. See page 33 - BMBW TSBW (5.5 x 60mm) Effective Thread Length (mm): 49 / Washer Ø (mm): 16 Head Style (washered): 5/16 Hex Box Qty: 100 / Carton Qty: 1,400 TSBW (5.5 x 75mm) Effective Thread Length (mm): 64 / Washer Ø (mm): 16 Head Style (washered): 5/16 Hex Box Qty: 100 / Carton Qty: 1,400 Hex Washer Head for Heavy Steel ( DIN 7504) TSBW (5.5 x 100mm) Effective Thread Length (mm): 80 / Washer Ø (mm): 16 Head Style (washered): 5/16 Hex Box Qty: 100 / Carton Qty: 1,200 TSBW (5.5 x 38mm) Effective Thread Length (mm): 15 / Washer Ø (mm): 16 Head Style (washered): 5/16 Hex Box Qty: 100 / Carton Qty: 2,400 TSBW (5.5 x 50mm) Effective Thread Length (mm): 27 / Washer Ø (mm): 16 Head Style (washered): 5/16 Hex Box Qty: 100 / Carton Qty: 1,400 TSBW (5.5 x 60mm) Effective Thread Length (mm): 37 / Washer Ø (mm): 16 Head Style (washered): 5/16 Hex Box Qty: 100 / Carton Qty: 1,400 TSBW (5.5 x 70mm) Effective Thread Length (mm): 47 / Washer Ø (mm): 16 Head Style (washered): 5/16 Hex Box Qty: 100 / Carton Qty: 1,400 TSBW (5.5 x 85mm) Effective Thread Length (mm): 62 / Washer Ø (mm): 16 Head Style (washered): 5/16 Hex Box Qty: 100 / Carton Qty: 1,400 TSBW (5.5 x 100mm) Effective Thread Length (mm): 80 / Washer Ø (mm): 16 Head Style (washered): 5/16 Hex Box Qty: 100 / Carton Qty: 1,400 Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk

29 Tek Screws Hex Washer Head SuperTek for Extra Heavy Steel Designed for fixing cladding and roofing applications to hot and cold rolled purlins and rails. SuperTek products are designed for use as an alternative to shot-fire in extra thick steels up to 22mm thick. Manufactured in accordance with BS EN ISO 9,000:2,000 TSBW (5.5 x 50mm) Effective Thread Length (mm): 21 Drill Point: #7 / Head Style: 5/16 Hex Box Qty: 100 / Carton Qty: 1,400 Pro Tip Use a power screwdriver with 1,500-2,500rpm. Tek Screws/Hex Washer Head Bonded steel washer, can act as isolation between substrate and fixture, as an aid to clamping where fixture clearance hole sizes require, and as a weatherseal. Hex flange head with bonded washer. 500hr rated Evoshield TM coating gives high performing corrosion protection, setting standards for surface hardness and integrity. Aggressive threadform design ensures consistent tapping and superb holding power. Super hard and sharp drill tips ensure fast drill times. Precision formed concave fluting ensures speedy chip removal. Mechanical Performance Diameter Tensile Shear 4.8mm 9.0kN 6.4kN 5.5mm 11kN 8.1kN 5.5mm 14.2kN 9.2kN Pullover Performance The restricting factor for any screw connection of this type is the pullover value derived from the interaction between fixture and fastener head. 0.9mm Steel Sheet 5.8kN 1.2mm Steel Sheet 7.0kN Ultimate Load Screw Thread Drill Steel Thickness Diameter Point 1.2mm 1.6mm 2.0mm 2.5mm 3.0mm 4.0mm 5.0mm 6.0mm 4.8mm Coarse Tek 3 2.0kN 2.6kN 4.0kN 5.8kN 6.5kN mm Coarse Tek 3 2.5kN 3.4kN 4.8kN 7.0kN 8.1kN mm Fine Tek kN 11.2kN 14.1kN 5.5mm Fine Tek kN 15.79kN Full product technical information is available from our product datasheets which can be requested from our Sales Office or downloaded from our website * Site testing recommended See also: Extended Magnetic Drive Socket (p.56) Hex Head Tek Screws (p.24-25) Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk Page 27

30 Tek Screws Wing-Drill for Light Steel TSTF (4.2 x 38mm) Timber Thickness (mm): 6-22 Drill Point: # 3 / Steel Thickness (mm): Head Style: P2 Csk Ribbed Box Qty: 200 / Carton Qty: 4,800 TSTF (4.8 x 45mm) Timber Thickness (mm): Drill Point: # 3 / Steel Thickness (mm): Head Style: P2 Csk Ribbed Box Qty: 100 / Carton Qty: 2,400 TSTF (5.5 x 50mm) Timber Thickness (mm): Drill Point: # 3 / Steel Thickness (mm): Head Style: P3 Csk Ribbed Box Qty: 200 / Carton Qty: 2,800 Also available in stainless steel. See page 32 - BMWD TSTF (5.5 x 62mm) Timber Thickness (mm): Drill Point: # 3 / Steel Thickness (mm): Head Style: P3 Csk Ribbed Box Qty: 200 / Carton Qty: 2,800 TSTF (5.5 x 80mm) Timber Thickness (mm): Drill Point: # 3 / Steel Thickness (mm): Head Style: P3 Csk Box Qty: 100 / Carton Qty: 1,400 TSTF (5.5 x 100mm) Timber Thickness (mm): Drill Point: # 3 / Steel Thickness (mm): Head Style: P3 Csk Box Qty: 100 / Carton Qty: 1,400 TSTF (5.5 x 120mm) Timber Thickness (mm): Drill Point: # 3 / Steel Thickness (mm): Head Style: P3 Csk Box Qty: 100 / Carton Qty: 1,400 Wing-Drill for Heavy Steel ( DIN 7504) TSTF (5.5 x 42mm) Timber Thickness (mm): Drill Point: # 5 / Steel Thickness (mm): Head Style: P3 Csk Box Qty: 100 / Carton Qty: 2,400 TSTF (5.5 x 150mm) Timber thickness (mm): 125 Drill Point: #3 Steel Thickness (mm): Head Style: P3 Csk Box Qty: 100 / Carton Qty: 1,200 Also available in stainless steel. See page 33 - BMWD Also available in stainless steel. See page 33 - BMWD TSTF (5.5 x 65mm) Timber Thickness (mm): Drill Point: # 5 / Steel Thickness (mm): Head Style: P3 Csk Box Qty: 200 / Carton Qty: 2,800 TSTF (5.5 x 85mm) Timber Thickness (mm): Drill Point: # 5 / Steel Thickness (mm): Head Style: P3 Csk Box Qty: 100 / Carton Qty: 1,400 TSTF (5.5 x 100mm) Timber Thickness (mm): Drill Point: # 5 / Steel Thickness (mm): Head Style: P3 Csk Box Qty: 100 / Carton Qty: 1,400 Also available in stainless steel. See page 33 - BMWD TSTF (5.5 x 135mm) Timber Thickness (mm): Drill Point: # 5 / Steel Thickness (mm): Head Style: P3 Csk Box Qty: 100 / Carton Qty: 1,400 Page 28 Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk

31 Tek Screws Wing-Drill Designed for fixing timber or composites to steel. Manufactured in accordance with BS EN ISO 9,000:2,000. Evolution stick fit recess ensures stable driving characteristics. Pro Tip Change your drive bit regularly. 500hr rated Evoshield TM coating gives high performing corrosion protection, setting standards for surface hardness and integrity. Tek Screws/Wing-Drill Countersinking nibs under head provide flush finish in fixture. Aggressive threadform design ensures consistent tapping and superb holding power. High grade, medium carbon steel (C1022). Reamer wings prevent timber jacking during use. Super hard and sharp drill tips ensure fast drill times. Precision formed concave fluting ensures speedy chip removal. Mechanical Performance Diameter Tensile Shear 4.2mm 6.8kN 4.4kN 4.8mm 9.0kN 6.4kN 5.5mm 14.2kN 9.2kN Ultimate Load Screw Drill Steel Thickness Thread Diameter Point 1.2mm 1.6mm 2.0mm 2.5mm 3.0mm 4.0mm 5.0mm 6.0mm 4.2mm Coarse Tek 3 1.5kN 2.2kN 3.0kN 5.2kN 5.6kN mm Coarse Tek 3 2.0kN 2.6kN 4.0kN 5.8kN 6.5kN mm Coarse Tek 3 2.5kN 3.4kN 4.8kN 7.0kN 8.1kN mm Fine Tek kN 11.2kN 14.1kN Full product technical information is available from our product datasheets which can be requested * Site testing recommended from our Sales Office or downloaded from our website See also: Phillips 2 Screwdriver Insert Bit (p.57) Magnetic Bit Holder (p.56) Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk Page 29

32 TSPH (4.8 x 16mm) Drive: PH2 / Head Style: Pancake Steel Thickness (mm): Box Qty: 500 / Carton Qty: 9,000 Ask For Evolution Tek Screws Metal Framing TSPH (5.5 x 19mm) Drive: PH2 / Head Style: Pancake Steel Thickness (mm): Box Qty: 500 / Carton Qty: 5,000 Also available in stainless steel. See page 31 - SSPH TSPH (5.5 x 25mm) Drive: PH3 / Head Style: Pancake Steel Thickness (mm): Box Qty: 200 / Carton Qty: 4,800 TSLP (4.8 x 22mm) Drive: PH3 / Head Style: Wafer Steel Thickness (mm): Box Qty: 500 / Carton Qty: 8,000 TSLP (5.5 x 38mm) Drive: PH3 / Head Style: Wafer Steel Thickness (mm): Box Qty: 200 / Carton Qty: 4,800 Designed for fixing steel to steel. Evolution stick-fit recess ensures stable driving characteristics. *product benefits apply to both TSLP and TSPH screws Superior corrosion protection to ensure long term fastener integrity. High grade, medium carbon steel (C1022). Mechanical Performance Diameter Tensile Shear 4.8mm Coarse Thread 9.0kN 6.4kN 5.5mm Coarse Thread 11.0kN 8.1kN 5.5mm Fine Thread 14.2kN 9.2kN * Site testing recommended Heating and Ventilation Screws Silver Evoshield TM coating with 500hr salt spray rating. Super hard and sharp drill tips ensure fast drill times. TSHV x 12mm Effective Thread Length (mm): 8 Head Style: 7mm Hex Box Qty: 1,000 / Carton Qty: 10,000 TSHV x 15mm Effective Thread Length (mm): 10 Head Style: 5/16 Hex Box Qty: 1,000 / Carton Qty: 10,000 For assembly and fabrication of ducting and air conditioning systems. Case hardened carbon steel C1022 grade. Bright zinc plated for superior corrosion resistance. Fully threaded for application versatility. Precision formed concave fluting ensures speedy chip removal. Page 30 Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk

33 Tek Screws Stainless Steel for Use in Aluminium Stainless Steel Self-Drill Screw with CSK Head for Aluminium SSCSK x 38mm Box Qty: 500 / Carton Qty: 7,000 Stainless Steel Self Drill Screw for Aluminium SSHW x 16mm Box Qty: 500 / Carton Qty: 7,000 Stainless Steel Stainless Steel Pancake Head Self-Drilling Screw for Light Steel SSPH x 19mm Box Qty: 500 / Carton Qty: 5,000 Tek Screws/Stainless Steel Stainless Steel Hex Washer Head Self-Drilling Screw for Light Steel SSS x 22mm Box Qty: 200 / Carton Qty: 2,000 Stainless Steel Wing-Drill Self-Drilling Screw with CSK Head SSWD x 38mm Box Qty: 100 / Carton Qty: 2,400 Stainless Steel Wing-Drill Self-Drilling Screw with CSK Head SSWD x 80mm Box Qty: 100 / Carton Qty: 1,400 Stainless steel tek screws are designed for use in a variety of applications where a fastener with a standard coating is not suitable due to the requirement for superior corrosion protection. Often the best value option. Despite higher initial costs, over the total life of the project stainless steel fasteners often represent the best value option. The bright silver surface of stainless steel fasteners provides a contemporary and attractive appearance which is easily maintained. Ultimate corrosion protection ideal for use in aggressive ACQ or salt based timber treatments, hardwoods with high tannin content, in coastal environments, around swimming pools or in other internal atmospheres prone to humidity. Super hard, super sharp drill tip Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk Page 31

34 BMHH x 25mm Box Qty: 200 / Carton Qty: 2,000 Ask For Evolution Tek Screws Bi-Metal for Light Steel BMHH x 38mm Box Qty: 200 / Carton Qty: 2,000 Best of Both Worlds Stainless steel body with carbon steel drill tip BMHH x 50mm Box Qty: 100 / Carton Qty: 1,000 BMHH x 65mm Box Qty: 100 / Carton Qty: 1,000 BMHH x 80mm Box Qty: 100 / Carton Qty: 1,000 BMHH x 100mm Box Qty: 100 / Carton Qty: 1,000 BMBW x 25mm Box Qty: 200 / Carton Qty: 2,000 BMBW x 38mm Box Qty: 200 / Carton Qty: 2,000 BMBW x 50mm Box Qty: 100 / Carton Qty: 1,000 BMWD x 62mm Box Qty: 100 / Carton Qty: 1,000 BMBW x 135mm Box Qty: 100 / Carton Qty: 1,000 BMTSBWHT x 60mm Box Qty: 100 / Carton Qty: 1,000 BMTSBWHT x 80mm Box Qty: 100 / Carton Qty: 1,000 BMTSBWHT x 105mm Box Qty: 100 / Carton Qty: 1,000 BMTSBWHT x 135mm Box Qty: 100 / Carton Qty: 1,000 Page 32 Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk

35 Tek Screws Bi-Metal for Heavy Steel BMHH x 38mm Box Qty: 200 / Carton Qty: 2,000 BMHH x 50mm Box Qty: 100 / Carton Qty: 1,000 BMBW x 38mm Box Qty: 200 / Carton Qty: 2,000 BMBW x 65mm Box Qty: 100 / Carton Qty: 1,000 Bi-metal, the best of both worlds. Ultimate corrosion protection and superior drilling performance. Designed for fastening when stainless steel product is required, for example in aluminium sheeting and panels. Tek Screws/Bi-Metal BMBW x 100mm Box Qty: 100 / Carton Qty: 1,000 BMWD x 65mm Box Qty: 100 / Carton Qty: 1,000 BMWD x 85mm Box Qty: 100 / Carton Qty: 1,000 BMWD x 135mm Box Qty: 100 / Carton Qty: 1,000 For use in aluminium. Reduced heat loss when used with external cladding. Bi-metal fasteners have a welded, hardened carbon steel drill point married to a 304 grade stainless steel shank. High carbon, high performance drill point ensures superior drilling characteristics, giving accurate drilling every time. Hex/flange head design provides sure clamping action. Ultimate corrosion protection to ensure long term fastener integrity. Aggressive threadform design ensures consistent tapping and superb holding power. Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk Page 33

36 Tek Screws Fibrous Cement Board Screws SSDH GP 6.3 x 130mm Gash Point Box Qty: 100 / Carton Qty: 800 Gash Point TSBW GP 6.3 x 25mm Head Style: 5/16 Hex Box Qty: 200 / Carton Qty: 4,800 TSBW GP 6.3 x 32mm Head Style: 5/16 Hex Box Qty: 200 / Carton Qty: 2,800 TSBW GP 6.3 x 45mm Head Style: 5/16 Hex Box Qty: 200 / Carton Qty: 3,200 TSBW GP 6.3 x 60mm Head Style: 5/16 Hex Box Qty: 100 / Carton Qty: 1,400 TSBW GP 6.3 x 80mm Head Style: 5/16 Hex Box Qty: 100 / Carton Qty: 1,400 TSBW GP 6.3 x 100mm Head Style: 5/16 Hex Box Qty: 100 / Carton Qty: 1,200 Page 34 Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk

37 Tek Screws Fibrous Cement Board Screws For fixing fibrous cement sheets to timber. Sinusoidal profiling/ corrugated roofing sheets Steel track (Z purlin) Case hardened carbon steel C1022 grade. Silver Evoshield TM coating with 500hr salt spray rating. Precision formed concave fluting ensures speedy chip removal. Replaces hook bolts and drive screws. Wings on shank will ream a clearance hole in the sheets. Special composite and stainless steel EPDM washer will provide a sure weather seal in sinusoidal profiled cladding. Gash Point For fixing profile metal sheets to timber purlins. Box profile roof and wall cladding sheets Tek Screws/Fibrous Cement Board & Gash Point Timber Case hardened carbon steel C1022 grade. The gash point makes the initial penetration of the metal sheet easier. Fully threaded for application versatility. 16mm bonded EPDM washer. Zinc coating Sharp tapping threads make sure of a low-torque, sure fixing every time. Paintable Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk Page 35

38 Tek Screws Stitching Screws TSFHR (6.3 x 22mm) Drill Point: # 2 Head Style: Flange Box Qty: 200 / Carton Qty: 4,800 Also available in stainless steel. See page 31 - SSS and zinc coated. See next section of this page - ZS22-2 TSFHR (8.0 x 25mm) Drill Point: # 1 Head Style: Flange Box Qty: 100 / Carton Qty: 2,400 Zinc Coated for Light Steel ZS x 22mm Box Qty: 200 / Carton Qty: 2,800 BWZ x 25mm Box Qty: 200 / Carton Qty: 2,800 HWZ x 25mm Box Qty: 200 / Carton Qty: 2,800 Zinc Coated for Heavy Steel HWZ x 38mm Box Qty: 200 / Carton Qty: 2,800 BWZ x 38mm Box Qty: 200 / Carton Qty: 2,800 Page 36 Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk

39 Tek Screws Stitching Screws For stitching cladding panels. Hex/flange head design provides sure clamping action. Silver Evoshield TM coating with 500hr salt spray rating. Zinc Coated Designed for fastening where a high end corrosion resistant coating is not required. High grade, medium carbon steel (C1022) helps prevent head snap. Super hard, super sharp reduced width drill tip ensure accurate pilot drilling and centering. Pro Tip Use a power screwdriver with 2,000-4,000rpm. Tek Screws/Stitching Screws & Zinc Coated Available with or without 16mm bonded EPDM washer which can act as isolation between substrate and fixture, as an aid to clamping where fixture clearance holes require and as a weatherseal. Zinc coating Hex flange head or hex flange head with washer. Aggressive threadform design ensures consistent tapping and superb holding power. Super hard and sharp drill tips ensure fast drill times. Precision formed concave fluting ensures speedy chip removal. Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk Page 37

40 Tek Screws Composite Panel Fasteners for Light Steel TSBWHT /6.3 x 80mm Panel Thickness (mm): Drill Point: # 3 Washered Head Style: 5/16 Hex Box Qty: 100 / Carton Qty: 1,400 TSBWHT /6.3 x 105mm Panel Thickness (mm): Drill Point: # 3 Washered Head Style: 5/16 Hex Box Qty: 100 / Carton Qty: 1,200 TSBWHT /6.3 x 135mm Panel Thickness (mm): Drill Point: # 3 Washered Head Style: 5/16 Hex Box Qty: 100 / Carton Qty: 900 TSBWHT /6.3 x 150mm Panel Thickness (mm): Drill Point: # 3 Washered Head Style: 5/16 Hex Box/Carton Qty:100/900 Assembled with 19mm washer. TSBWHT /6.3 x 185mm Panel Thickness (mm): Drill Point: #3 Washered Head Style: 5/16 Hex Box/Carton Qty: 50/300 Assembled with 19mm washer. TSBWHT /6.3 x 225mm Panel Thickness (mm): Drill Point: #3 Washered Head Style: 5/16 Hex Box/Carton Qty: 50/300 Page 38 Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk

41 Tek Screws Composite Panel Fasteners for Light Steel For fastening cladding and roofing sandwich panels to cold and hot rolled rails and purlins. Manufactured in accordance with BS EN ISO 9,000:2,000 For fastening steel wall channeling through insulation to studs. Hex dished/washer head, can act as isolation between substrate and fixture, as an aid to clamping where fixture clearance hole requires and as a weather seal. Unthreaded piece ensures panel surfaces are not deformed. Pro Tip Use power screwdriver with a suitable depth stop. DIN 7504 hex flange with EPDM rubber washer. Aggressive 6.3mm buttress thread securely clamps panel surface against washer. Tek Screws/Composite Panel Fasteners 500hr rated Evoshield TM coating gives high performing corrosion protection, setting standards for surface hardness and integrity. Super hard, sharp drill tips ensure fast drill times and eliminate walking. Sharp tapping threads make sure of a low-torque, fixing every time. Precision formed concave fluting ensures speedy chip removal. Mechanical Performance Screw Diameter Tensile Shear 4.8mm 9.0kN 6.4kN 5.5mm 11.0kN 8.1kN 5.5mm 14.2kN 9.2kN Pullover Performance The restricting factor for any screw connection of this type is the pullover value derived from the interaction between fixture and fastener head. 0.9mm Steel Sheet 5.8kN 1.2mm Steel Sheet 7.0kN Screw Diameter Thread Drill Point Ultimate Load Base Steel Thickness (mm) 1.2mm 1.6mm 2.0mm 2.5mm 3.0mm 4.0mm 5.0mm 6.0mm 4.8mm Coarse Tek 3 2.0kN 2.6kN 4.0kN 5.8kN 6.5kN mm Coarse Tek 3 2.5kN 3.4kN 4.8kN 7.0kN 8.1kN 9.0kN mm Fine Tek kN 11.2kN 14.1kN * Site testing recommended Full product technical information is available from our product datasheets which can be requested from our Sales Office or downloaded from our website See also: Magnetic Drive Socket (p.56) Stitching Screws (p.36-37) Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk Page 39

42 Masonry Screws Countersunk Head MSCSK (4.8 x 32mm) Masonry Screw - Countersunk Head (Use our SDS Plus Drill Bit: SDS (p. 59) Drive: Phillips No.2 / Fixture Build-Up (mm): 0-7 Box Quantity: 100 / Carton Quantity: 3,200 MSCSK (4.8 x 45mm) Masonry Screw - Countersunk Head (Use our SDS Plus Drill Bit: SDS (p. 59) Drive: Phillips No.2 / Fixture Build-Up (mm): 5-20 Box Quantity: 100 / Carton Quantity: 3,200 MSCSK (4.8 x 57mm) Masonry Screw - Countersunk Head (Use our SDS Plus Drill Bit: SDS (p. 59) Drive: Phillips No.2 / Fixture Build-Up (mm): Box Quantity: 100 / Carton Quantity: 2,400 MSCSK (4.8 x 70mm) Masonry Screw - Countersunk Head (Use our SDS Plus Drill Bit: SDS (p. 59) Drive: Phillips No.2 / Fixture Build-Up (mm): Box Quantity: 100 / Carton Quantity: 1,400 MSCSK (6.3 x 32mm) Masonry Screw - Countersunk Head (Use our SDS Plus Drill Bit: SDS (p. 59) Drive: Phillips No.3 / Fixture Build-Up (mm): 0-7 Box Quantity: 100 / Carton Quantity: 2,400 MSCSK (6.3 x 45mm) Masonry Screw - Countersunk Head (Use our SDS Plus Drill Bit: SDS (p. 59) Drive: Phillips No.3 / Fixture Build-Up (mm): 5-20 Box Quantity: 100 / Carton Quantity: 3,000 MSCSK (4.8 x 82mm) Masonry Screw - Countersunk Head (Use our SDS Plus Drill Bit: SDS (p. 59) Drive: Phillips No.2 / Fixture Build-Up (mm): Box Quantity: 100 / Carton Quantity: 1,400 MSCSK (6.3 x 57mm) Masonry Screw - Countersunk Head (Use our SDS Plus Drill Bit: SDS (p. 59) Drive: Phillips No.3 / Fixture Build-Up (mm): Box Quantity: 100 / Carton Quantity: 2,400 MSCSK (4.8 x 100mm) Masonry Screw - Countersunk Head (Use our SDS Plus Drill Bit: SDS (p. 59) Drive: Phillips No.2 / Fixture Build-Up (mm): Box Quantity: 100 / Carton Quantity: 1,400 MSCSK (6.3 x 70mm) Masonry Screw - Countersunk Head (Use our SDS Plus Drill Bit: SDS (p. 59) Drive: Phillips No.3 / Fixture Build-Up (mm): Box Quantity: 100 / Carton Quantity: 1,600 MSCSK (6.3 x 82mm) Masonry Screw - Countersunk Head (Use our SDS Plus Drill Bit: SDS (p. 59) Drive: Phillips No.3 / Fixture Build-Up (mm): Box Quantity: 100 / Carton Quantity: 1,600 MSCSK (6.3 x 100mm) Masonry Screw - Countersunk Head (Use our SDS Plus Drill Bit: SDS (p. 59) Drive: Phillips No.3 / Fixture Build-Up (mm): Box Quantity: 100 / Carton Quantity: 1,400 MSCSK (6.3 x 125mm) Masonry Screw - Countersunk Head (Use our SDS Plus Drill Bit: SDS (p. 59) Drive: Phillips No.3 Fixture Build-Up (mm): Box Quantity: 100 / Carton Quantity: 800 Page 40 Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk

43 Masonry Screws Slotted Head MSHH (6.3 x 32mm) Masonry Screw - Slotted Hex Washer Head (Use our SDS Plus Drill Bit: SDS (p. 59) Drive: 5/16 AF Hex / Fixture Build-Up (mm): 0-7 Box Quantity: 100 / Carton Quantity: 3,200 MSHH (6.3 x 45mm) Masonry Screw - Slotted Hex Washer Head (Use our SDS Plus Drill Bit: SDS (p. 59) Drive: 5/16 AF Hex / Fixture Build-Up (mm): 5-20 Box Quantity: 100 / Carton Quantity: 1,600 MSHH (6.3 x 57mm) Masonry Screw - Slotted Hex Washer Head (Use our SDS Plus Drill Bit: SDS (p. 59) Drive: 5/16 AF Hex / Fixture Build-Up (mm): Box Quantity: 100 / Carton Quantity: 2,400 MSHH (6.3 x 70mm) Masonry Screw - Slotted Hex Washer Head (Use our SDS Plus Drill Bit: SDS (p. 59) Drive: 5/16 AF Hex / Fixture Build-Up (mm): Box Quantity: 100 / Carton Quantity: 1,400 MSHH (6.3 x 82mm) Masonry Screw - Slotted Hex Washer Head (Use our SDS Plus Drill Bit: SDS (p. 59) Drive: 5/16 AF Hex / Fixture Build-Up (mm): Box Quantity: 100 / Carton Quantity: 1,400 MSHH (6.3 x 100mm) Masonry Screw - Slotted Hex Washer Head (Use our SDS Plus Drill Bit: SDS (p. 59) Drive: 5/16 AF Hex / Fixture Build-Up (mm): Box Quantity: 100 / Carton Quantity: 1,200 Masonry Screws/Countersunk & Slotted Head Designed for fixing timber battens, trunking, track and general components into concrete and masonry. Pro Tip Use screwdriver with a suitable depth stop. Non-expansion fixing allows fixing closer to edge of substrate. 500Hr rated Evoshield TM coating gives high performing corrosion protection, setting standards for surface hardness and integrity. Nail point tip Head styles - both hex and Csk types available for application versatility. Precision manufacture ensures stick-fit with Csk types. Aggressive threadform design ensures consistent tapping and superb holding power. Fast and simple installation, re-usable, no plugs required. Mechanical Performance Diameter Tensile Shear 4.8mm 9.0kN 4.5kN 6.3mm 16.0kN 9.0kN Drill Requirements Screw Diameter 4.8mm 6.3mm Drill 4.35mm 5.15mm Embedment Depth Ultimate Load 35N/mm 2 Concrete Common Masonry Dense Block Embedment Hollow Beam 4.8mm dia. 6.3mm dia. 4.8mm dia. 6.3mm dia. 4.8mm dia. 6.3mm dia. Depth 4.8mm dia. 6.3mm dia. 25mm 2.5kN 5.6kN 1.3kN 2.0kN 1.5kN 2.5kN 30mm 5.0kN 9.7kN 30mm 3.3kN 7.0kN 1.5kN 2.5kN 1.7kN 3.0kN 35mm 5.4kN 10.2kN 35mm 4.2kN 8.8kN 2.3kN 3.0kN 2.0kN 4.0kN 40mm 5.2kN 11.0kN 3.2kN 4.0kN 2.5kN 4.7kN Full product technical information is available from our product datasheets which can be requested from our Sales Office or downloaded from our website * Site testing recommended Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk Page 41

44 Concrete Screws STCS82 - Concrete Screw (7.5 x 82mm) Drive: Torx 30 Drill Diameter (mm): 6 (Use our SDS Plus Drill Bit: SDS(H)6160 (p ) Min. Drill Depth Through Fixture (mm): 95 Min. Embedment Depth (mm): Box Quantity: 100 / Carton Quantity: 1,000 STCS92 - Concrete Screw (7.5 x 92mm) Drive: Torx 30 Drill Diameter (mm): 6 (Use our SDS Plus Drill Bit: SDS(H)6160 (p ) Min. Drill Depth Through Fixture (mm): 105 Min. Embedment Depth (mm): Box Quantity: 100 / Carton Quantity: 1,000 STCS102 - Concrete Screw (7.5 x 102mm) Drive: Torx 30 Drill Diameter (mm): 6 (Use our SDS Plus Drill Bit: SDS(H)6160 (p ) Min. Drill Depth Through Fixture (mm): 115 Min. Embedment Depth (mm): Box Quantity: 100 / Carton Quantity: 1,000 STCS112 - Concrete Screw (7.5 x 112mm) Drive: Torx 30 Drill Diameter (mm): 6 (Use our SDS Plus Drill Bit: SDS(H)6160 (p ) Min. Drill Depth Through Fixture (mm): 125 Min. Embedment Depth (mm): Box Quantity: 100 / Carton Quantity: 1,000 STCS122 - Concrete Screw (7.5 x 122mm) Drive: Torx 30 Drill Diameter (mm): 6 (Use our SDS Plus Drill Bit: SDS(H)6160 (p ) Min. Drill Depth Through Fixture (mm): 135 Min. Embedment Depth (mm): Box Quantity: 50 / Carton Quantity: 600 STCS132 - Concrete Screw (7.5 x 132mm) Drive: Torx 30 Drill Diameter (mm): 6 (Use our SDS Plus Drill Bit: SDS(H)6160 (p ) Min. Drill Depth(mm): 145 Min. Embedment Depth (mm): Box Quantity: 50 / Carton Quantity: 600 Page 42 Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk

45 Concrete Screws STCS152 - Concrete Screw (7.5 x 152mm) Drive: Torx 30 / Drill Diameter (mm): 6 (Use our SDS Plus Drill Bit: SDS(H)6160 (p ) Min. Drill Depth Through Fixture (mm): 165 Min. Embedment Depth (mm): Box Quantity: 50 / Carton Quantity: 600 Concrete Screws STCS162 - Concrete Screw (7.5 x 162mm) Drive: Torx 30 / Drill Diameter (mm): 6 (Use our SDS Plus Drill Bit: SDS(H)6160 (p ) Min. Drill Depth Through Fixture (mm): 175 Min. Embedment Depth (mm): Box Quantity: 50 / Carton Quantity: 600 STCS182 - Concrete Screw (7.5 x 182mm) Drive: Torx 30 / Drill Diameter (mm): 6 (Use our SDS Plus Drill Bit: SDS(H)6160 (p ) Min. Drill Depth Through Fixture (mm): 195 Min. Embedment Depth (mm): Box Quantity: 50 / Carton Quantity: 500 A heavy duty self-tapping concrete screw suitable for fixing wood, metal or PVCu frames to masonry. Pro Tip In very dense materials a 6.5mm drill bit may be used. Self-countersinking nibs under the head of the screws ensure flush finish. Torx30 recess provides excellent torsional stability and superior drive characteristics. Heavy zinc coating (5µ) gives good corrosion protection. Case hardened carbon steel (C1018) with clear zinc passivated coating (48hr Rated). Aggressive thread form design ensures consistent tapping and superb holding power. Non-expansion fixing. Allows fixing closer to edge of substrate. Mechanical Performance Diameter Tensile Shear 7.5mm 18.5kN 14.5kN Ultimate Load Embedment 35N/mm 2 Hollow Beam Common Masonry Dense Block Embedment Depth Depth (mm) Concrete 7.5mm dia. 25mm 6.5kN 2.5kN 3.0kN 30mm 10kN 30mm 7.5kN 3.0kN 3.5kN 35mm 11.5kN 40mm 9.0kN 3.4kN 5.1kN 60mm 13.5kN n/a 8.2kN Full product technical information is available from our product datasheets which can be requested from our Sales Office or downloaded from our website * Site testing recommended Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk Page 43

46 Light Anchors Hammerfix HS640 - Nylon Hammerfix Screw M6 x 40mm / Drill ø 6mm (Use our SDS Plus Drill Bit: SDS(H)6160 (p ) Max. Fixture Thickness (mm): 10 Min. Drill Depth (mm): 40 Box Qty: 200 / Carton Qty: 2,000 HS650 - Nylon Hammerfix Screw M6 x 50mm / Drill ø 6mm (Use our SDS Plus Drill Bit: SDS(H)6160 (p ) Max. Fixture Thickness (mm): 25 Min. Drill Depth (mm): 40 Box Qty: 200 / Carton Qty: 2,000 HS660 - Nylon Hammerfix Screw M6 x 60mm / Drill ø 6mm (Use our SDS Plus Drill Bit: SDS(H)6160 (p ) Max. Fixture Thickness (mm): 35 Min. Drill Depth (mm): 40 Box Qty: 200 / Carton Qty: 2,000 HS680 - Nylon Hammerfix Screw M6 x 80mm / Drill ø 6mm (Use our SDS Plus Drill Bit: SDS(H)6160 (p ) Max. Fixture Thickness (mm): 55 Min. Drill Depth (mm): 40 Box Qty: 200 / Carton Qty: 1,200 HS860 - Nylon Hammerfix Screw M8 x 60mm / Drill ø 8mm (Use our SDS Plus Drill Bit: SDS(H)8210 (p ) Max. Fixture Thickness (mm): 25 Min. Drill Depth (mm): 50 Box Qty: 100 / Carton Qty: 1,200 HS880 - Nylon Hammerfix Screw M8 x 80mm / Drill ø 8mm (Use our SDS Plus Drill Bit: SDS(H)8210 (p ) Max. Fixture Thickness (mm): 40 Min. Drill Depth (mm): 50 Box Qty: 100 / Carton Qty: 1,000 HS Nylon Hammerfix Screw M8 x 100mm / Drill ø 8mm (Use our SDS Plus Drill Bit: SDS(H)8210 (p ) Max. Fixture Thickness (mm): 60 Min. Drill Depth (mm): 50 Box Qty: 100 / Carton Qty: 600 HS Nylon Hammerfix Screw M8 x 120mm / Drill ø 8mm (Use our SDS Plus Drill Bit: SDS(H)8210 (p ) Max. Fixture Thickness (mm): 80 Min. Drill Depth (mm): 50 Box Qty: 100 / Carton Qty: 600 HS Hammerfix Screw M8 x 135mm Drill ø 8mm (Use our SDS Plus Drill Bit: SDS(H)8210 (p ) Max. Fixture Thickness (mm): 95 Min. Drill Depth (mm): 50 HSC640 - Nylon Hammerfix Screw (Collared) M6 x 40mm / Drill ø 6mm (Use our SDS Plus Drill Bit: SDS(H)6160 (p ) Max. Fixture Thickness (mm): 10 Min. Drill Depth (mm): 40 Box Qty: 200 / Carton Qty: 2,400 Page 44 Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk

47 Light Anchors Hammerfix A simple and tough anchor for quick through-fix installation into solid masonry. Suitable for internal and external construction work. Extensive range to suit most requirements. Pro Tip Can also be set with a screwdriver. Light Anchors/Hammerfix Countersunk head design protects the item being fixed. Screw manufactured from steel, then clear zinc coated. Time saving application due to pre-assembled screw and plug. High density nylon sleeve. Fully removable Simple and easy through fixing installation. Installation Drill a hole through the part to be fixed. Insert the anchor as deep as possible. Tap on the expansion screw to complete the setting of the anchor until the head of the screw comes in to contact with the flange of the sleeve. Alternatively use a suitable screwdriver to set the anchor by screwing the insert fully. Description HS640/ HS650/ HS660/ HS680 HS860/ HS880/ HS8100/ HS8120/ HS8135 Full product technical information is available from our product datasheets which can be requested from our Sales Office or downloaded from our website Ultimate Load Drill Tensile Shear Diameter Concrete Solid Brick Concrete Solid Brick C20/25 C20/25 6mm 0.5kN 0.68kN 0.65kN 0.65kN 8mm 0.92kN 1.2kN 1.10kN 0.80kN See also: SDS Plus Drill Bits (p.57-59) Metal Nail Ins (p.46-47) * Site testing recommended Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk Page 45

48 Light Anchors Stainless Steel Hammerfix SSHS640 (6 x 40mm) Drill diameter: 6mm (Use our SDS Plus Drill Bit: SDS(H)6160 (p ) Max fixture thickness: 10mm Min drill depth: 30mm Box Qty: 200 Carton Qty: 2,000 SSHS660 (6 x 60mm) Drill diameter: 6mm (Use our SDS Plus Drill Bit: SDS(H)6160 (p ) Max fixture thickness: 20mm Min drill depth: 40mm Box Qty: 200 Carton Qty: 2,000 SSHS860 (8 x 60mm) Drill diameter: 8mm (Use our SDS Plus Drill Bit: SDS(H)8210 (p ) Max fixture thickness: 20mm Min drill depth: 40mm Box Qty: 100 Carton Qty: 2,000 Metal Nail Ins MN630 (M6 x 30mm) - All Steel Nail In Flange Head Diameter (mm): 13 / Drill Ø (mm): 6 (Use our SDS Plus Drill Bit: SDS(H)6160 (p ) Max. Fixture Thickness: 5mm Min. Embedment Depth: 25mm Box Qty: 100 / Carton Qty: 2,000 SSHS8100 (8 x 100mm) Drill diameter: 8mm (Use our SDS Plus Drill Bit: SDS(H)8210 (p ) Max fixture thickness: 60mm Min drill depth: 40mm Box Qty: 100 Carton Qty: 2,000 MN640 (M6 x 40mm) - All Steel Nail In Flange Head Diameter (mm): 13 / Drill Ø (mm): 6 (Use our SDS Plus Drill Bit: SDS(H)6160 (p ) Max. Fixture Thickness: 15mm Min. Embedment Depth: 25mm Box Qty: 100 / Carton Qty: 2,000 MN650 (M6 x 50mm) - All Steel Nail In Flange Head Diameter (mm): 13 / Drill Ø (mm): 6 (Use our SDS Plus Drill Bit: SDS(H)6160 (p ) Max. Fixture Thickness: 25mm Min. Embedment Depth: 25mm Box Qty: 100 / Carton Qty: 1,500 Alloy Metal Nail Ins MN665 (M6 x 65mm) - All Steel Nail In Flange Head Diameter (mm): 13 / Drill Ø (mm): 6 (Use our SDS Plus Drill Bit: SDS(H)6160 (p ) Max. Fixture Thickness: 35mm Min. Embedment Depth: 30mm Box Qty: 100 / Carton Qty: 1,200 AMN640 (M6 x 40mm) - Zamak Alloy Metal Nail In Flange Head Diameter (mm): 13 / Drill Ø (mm): 6 (Use our SDS Plus Drill Bit: SDS(H)6160 (p ) Max. Fixture Thickness: 15mm Min. Embedment Depth: 25mm Box Qty: 100 / Carton Qty: 2,000 Page 46 Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk

49 Light Anchors Stainless Steel Hammerfix A simple and tough anchor for quick through-fix installation into solid masonry. Suitable for internal and external construction work and specifically designed for use in humid areas and outdoor constructions, especially coastal areas. See also: SDS Plus Drill Bits (p.57-59) Metal Nail Ins (p.46-47) Standard Hammerfix (p.44-45) All Steel Metal Nail Ins A non-removable anchor for suspended ceiling brackets, brick ties, drywall track, insulation brackets, signage, computer floor pedestals, conduit clips and many more to materials such as concrete, solid brickwork and stone. Countersunk head design protects the item being fixed. Time saving application due to pre-assembled screw and plug. Installation Drill a hole through the part to be fixed. Insert the anchor as deep as possible. Tap on the expansion screw to complete the setting of the anchor until the head of the screw comes in to contact with the flange of the sleeve. Or, use a suitable screwdriver to set the anchor by screwing the insert fully. All Steel Metal Nail Ins & Alloy Metal Nail Ins Screw manufactured from A304 grade stainless steel. High density nylon sleeve. Fully removable Simple and easy through fixing installation. Pro Tip Always use an all steel fixing over head. Light Anchors/Stainless Steel Hammerfix & Metal Nail Ins Alloy Metal Nail Ins For fixing components to concrete and masonry. Not for use in an overhead environment. Not fire tested. Quick and easy through fix item. High retaining power. Part No. Rec.Load Ultimate Load Concrete C30 MN kN 3.00kN MN kN 5.00kN AMN kN 3.50kN Solid Brick MN kN 2.5kN MN kn 2.5kN AMN kN 2.0kN * Site testing recommended Automatic expansion Available manufactured from AISI C1022 carbon steel or Zamak zinc aluminium alloy. Non-removable Time saving application due to pre-assembled nature of anchor. Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk Page 47

50 Light Anchors Ceiling Anchors EVDBZ640 (M6 x 40mm) - All Steel Ceiling Anchor Flange Head Diameter: 15mm / Drill Ø 6mm (Use our SDS Plus Drill Bit: SDS(H)6160 (p ) Max. Fixture Thickness (mm): 5 Min. Embedment Depth (mm): 35 Box Qty: 100 / Carton Qty: 2,000 EVDBZ665 (M6 x 65mm) - All Steel Ceiling Anchor Flange Head Diameter 15 mm / Drill Ø 6mm (Use our SDS Plus Drill Bit: SDS(H)6160 (p ) Max. Fixture Thickness (mm): 5 Min. Embedment Depth (mm): 35 Box Qty: 100 / Carton Qty: 1,000 A metal nail in anchor suitable for materials such as concrete, solid brickwork and stone. It is ideal for use with angle brackets in concrete ceilings, where regulations dictate that all steel anchors should be used for overhead fixing. Pro Tip Use with a ceiling bracket to hang wire ceilings. Installation Guide: Drill 6mm hole in base material, at least 5mm deeper than the anchor length. Thoroughly clean all dust and waste from drilled hole. Insert EVDBZ through fixing. Set anchor using hammer by driving the pin home until it has become flush with the anchor collar. Manufactured from steel and zinc with a clear passivated coating. Time saving application due to pre-assembled nature of anchor. Quick and easy through fix item. Extensive range to suit most requirements. High retaining power. Automatic expansion Non-removable Part No. Drill Diameter Minimum Embedment Ultimate Load C20/25 Concrete WH6 (M6 x 60mm) - Wirehanger Eye Diameter (mm): 6.5 Drill Diameter (mm): 6 (Use our SDS Plus Drill Bit: SDS(H)6160 (p ) Min. Drill Depth (mm): 35 Box Qty: 100 / Carton Qty: 2,000 Tensile Concrete Block Solid Brick EVDBZ640 6mm 35mm 7.5kN n/a 6.0kN EVDBZ665 6mm 35mm 7.5kN n/a 6.0kN * Site testing recommended Wirehangers All steel load assisted anchor for use in fixing cables and wires in suspended ceiling applications. 6.5mm eye to ensure speed of application when attaching wire. Zinc and clear passivated coating. Quick and easy installation. Installation Guide: Drill 6mm diameter hole a minimum of 35mm deep. Clean out drill hole. Position anchor in hole, tap in until it can go no further. Attach wire to eye and pull to set. PART NO. DRILL DIAMETER DRILL DEPTH (min) DESCRIPTION REC.LOAD Concrete C30/37 WH6 6.5mm 35mm WIREHANGER M6 x 60 Full product technical information is available from our product datasheets which can be requested from our Sales Office or downloaded from our website 1.00kN ULTIMATE LOAD 4.5kN * Site testing recommended Page 48 Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk

51 Light Anchors Insulation Fixings/Panel Fix EVPF50 (8mm x 50mm) Min drill depth: 35mm Pilot Hole: 8mm (Use our SDS Plus Drill Bit: SDS(H)8210 (p ) Fixture thickness: mm Box Qty: 500 / Carton Qty: 500 EVPF70 (8mm x 70mm) Min drill depth: 35mm Pilot Hole: 8mm (Use our SDS Plus Drill Bit: SDS(H)8210 (p ) Fixture thickness: mm Box Qty: 500 / Carton Qty: 500 EVPF90 (8mm x 90mm) Min drill depth: 35mm Pilot Hole: 8mm (Use our SDS Plus Drill Bit: SDS(H)8210 (p ) Fixture thickness: mm Box Qty: 500 / Carton Qty: 500 Light Anchors/Insulation Fixings/Panel Fix EVPF110 (8mm x 110mm) Min drill depth: 35mm Pilot Hole: 8mm (Use our SDS Plus Drill Bit: SDS(H)8210 (p ) Fixture thickness: mm Box Qty: 500 / Carton Qty: 500 EVPF130 (8mm x 130mm) Min drill depth: 35mm Pilot Hole: 8mm (Use our SDS Plus Drill Bit: SDS(H)8210) Fixture thickness: mm Box Qty: 500 / Carton Qty: 500 Designed for securing rigid insulation to solid base materials. Can also be used for fixing soft insulation (e.g. Rockwool) when combined with our 90mm diameter support washers. SW90 Support Washer 90mm Ø Box Qty: mm render-friendly head has a rough surface to provide a key for superior bonding of the render to the insulation. Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk Page 49

52 Light Anchors Insulation Fixings/Retaining Washers Insulation Retaining Washer RW5 (5mm recess) Box Qty: 500 Insulation Retaining Washer RW18 (18mm recess) Box Qty: 500 Insulation Fixings/Universal Insulation Anchors EVU90 (10mm x 90mm) Min drill depth: 40mm Pilot Hole: 10mm (Use our SDS Plus Drill Bit: SDS(H)10210 (p ) Fixture thickness: mm Box Qty: 200 / Carton Qty: 200 EVU110 (10mm x 110mm) Min drill depth: 40mm Pilot Hole: 10mm (Use our SDS Plus Drill Bit: SDS(H)10210 (p ) Fixture thickness: mm Box Qty: 200 / Carton Qty: 200 EVU130 (10mm x 130mm) Min drill depth: 40mm Pilot Hole: 10mm (Use our SDS Plus Drill Bit: SDS(H)10210 (p ) Fixture thickness: mm Box Qty: 200 / Carton Qty: 200 EVU140 (10mm x 140mm) Min drill depth: 40mm Pilot Hole: 10mm (Use our SDS Plus Drill Bit: SDS(H)10210 (p ) Fixture thickness: mm Box Qty: 200 / Carton Qty: 800 EVU160 (10mm x 160mm) Min drill depth: 40mm Pilot Hole: 10mm (Use our SDS Plus Drill Bit: SDS(H)10210 (p ) Fixture thickness: mm Box Qty: 200 Carton Qty: 600 Page 50 Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk

53 Light Anchors Insulation Fixings/Retaining Washers Designed for securing rigid insulation to solid base materials. Use with Evolution drywall screws, available up to 150mm long (See page 4-5) and self-drilling drywall screws, available up to 125mm long (See page 6-7). When the expansion pin is driven into the stem of the fixing, the stem expands to ensure a secure fit. Insulation Fixings/Universal Insulation Anchors Designed for fixing insulation to poor quality base materials e.g. hollow blocks. 46mm head with recessed screw mounting reduces cold bridging and allow for movement without damaging the surface finish. 50mm render-friendly head has a rough surface to provide a key for superior bonding of the render to the insulation. Light Anchors/Insulation Fixings/Retaining Washers, Universal Insulation Anchors See also: SDS Plus Drill Bits (p.57-59) Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk Page 51

54 Medium/Heavy Anchors Anchorbolts EAB840 (8 x 40mm) Min drill depth: 30mm Pilot Hole: 8mm (Use our SDS Plus Drill Bit: SDS(H)8210 (p ) Box Qty: 100 Carton Qty: 1,200 EAB875 (8 x 75mm) Min drill depth: 60mm Pilot Hole: 8mm (Use our SDS Plus Drill Bit: SDS(H)8210 (p ) Box Qty: 100 Carton Qty: 800 EAB8100 (8 x 100mm) Min drill depth: 60mm Pilot Hole: 8mm (Use our SDS Plus Drill Bit: SDS(H)8210 (p ) Box Qty: 50 Carton Qty: 600 EAB8130 (8 x 130mm) Min drill depth: 60mm Pilot Hole: 8mm (Use our SDS Plus Drill Bit: SDS(H)8210 (p ) Box Qty: 50 Carton Qty: 600 EAB8150 (8 x 150mm) Min drill depth: 60mm Pilot Hole: 8mm (Use our SDS Plus Drill Bit: SDS(H)8210 (p ) Box Qty: 25 Carton Qty: 400 EAB10575 (10.5 x 75mm) Min drill depth: 60mm Pilot Hole: 10mm (Use our SDS Plus Drill Bit: SDS(H)10210 (p ) Box Qty: 50 Carton Qty: 600 EAB (10.5 x 100mm) Min drill depth: 60mm Pilot Hole: 10mm (Use our SDS Plus Drill Bit: SDS(H)10210 (p ) Box Qty: 50 Carton Qty: 400 EAB (10.5 x 130mm) Min drill depth: 60mm Pilot Hole: 10mm (Use our SDS Plus Drill Bit: SDS(H)10210 (p ) Box Qty: 25 Carton Qty: 300 EAB (10.5 x 150mm) Min drill depth: 60mm Pilot Hole: 10mm (Use our SDS Plus Drill Bit: SDS(H)10210 (p ) Box Qty: 25 Carton Qty: 300 Page 52 Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk

55 Medium/Heavy Anchors Anchorbolts EAB12575 (12.5 x 75mm) Min drill depth: 70mm Pilot Hole: 12mm (Use our SDS Plus Drill Bit: SDS(H)12260 (p ) Box Qty: 50 Carton Qty: 400 Drop in Anchors EAB (12.5 x 100mm) Min drill depth: 70mm Pilot Hole: 12mm (Use our SDS Plus Drill Bit: SDS(H)12260 (p ) Box Qty: 25 Carton Qty: 300 EAB (12.5 x 130mm) Min drill depth: 70mm Pilot Hole: 12mm (Use our SDS Plus Drill Bit: SDS(H)12260 (p ) Box Qty: 25 Carton Qty: 200 EAB (12.5 x 150mm) Min drill depth: 70mm Pilot Hole: 12mm (Use our SDS Plus Drill Bit: SDS(H)12260 (p ) Box/Carton Qty: 20/240 Medium/Heavy Anchors/Anchorbolts EAB1675 (16.0 x 75mm) Min drill depth: 60mm Pilot Hole: 16mm (Use our SDS Plus Drill Bit: SDS(H)16260 (p ) Box Qty: 25 Carton Qty: 300 EAB16100 (16.0 x 100mm) Min drill depth: 70mm Pilot Hole: 16mm (Use our SDS Plus Drill Bit: SDS(H)16260 (p ) Box Qty: 10 Carton Qty: 160 EAB16150 (16.0 x 150mm) Min drill depth: 70mm Pilot Hole: 16mm (Use our SDS Plus Drill Bit: SDS(H)16260 (p ) Box/Carton Qty: 15/120 Designed for fixing to concrete in medium/heavy applications e.g. signage, street furniture, aerials, cladding, pipework and scaffolding to concrete and masonry. Fully threaded Manufactured from AISI 10B21 carbon steel with an electroplated zinc coating. Can be screwed directly into a hole drilled in the substrate without needing additional fixings or special tools. Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk Page 53

56 Medium/Heavy Anchors Drop in Anchors EADI625 (6.0 x 25mm) Min drill depth: 25mm Pilot Hole: 8mm Use our SDS Plus Drill Bit: SDS(H)8160 (p ) Box Qty: 100 / Carton Qty: 2,000 EADI830 (8.0 x 30mm) Min drill depth: 30mm Pilot Hole: 10mm Use our SDS Plus Drill Bit: SDS10160 (p ) Box Qty: 100 / Carton Qty: 2,000 EADI1040 (10.0 x 40mm) Min drill depth: 40mm Pilot Hole: 12mm Use our SDS Plus Drill Bit: SDS12160 (p ) Box Qty: 100 / Carton Qty: 1,000 EADI1250 (12.0 x 50mm) Min drill depth: 50mm Pilot Hole: 14mm Use our SDS Plus Drill Bit: SDS14260 (p ) Box Qty: 50 / Carton Qty: 500 EADI1665 (16.0 x 65mm) Min drill depth: 65mm Pilot Hole: 20mm Use our SDS Plus Drill Bit: SDS20160 (p ) Box Qty: 25 / Carton Qty: 250 Drop in Anchor Setting Tool Setting Tool Product Code EADIST6 EADIST10 EADIST16 For use with Drop in Anchor EADI625, EADI830 EADI1040, EADI1250 EADI1665 : Designed for fixing to concrete in medium/heavy applications. Ideal in overhead applications due to shallow embedment depths e.g. overhead hangers with threaded rod, cable tray systems, and light fixtures. Manufactured in carbon steel with electroplated zinc coating. Requires a setting tool to drive the internal plug and expand the anchor. Page 54 Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk

57 Accessories/Clips & Brackets Vertical Flange Clips High strength Fast, easy installation. Series of strong barbs grip the flange. Spring steel Yellow zinc passivated. VFC43 Vertical Flange Clip 19 x 43mm Box Quantity: 100 Carton Quantity: 1,800 For fixing lighting or suspended wire to steel profiles. Fixing of cable to steel purlins. Fixing suspended ceilings to steel profiles. Accessories/Clips & Brackets Installation Guide: 1. Place hook profile over the vertical of the purlin. 2. Tap in to place with a hammer. 3. We recommend using our WHSDZ12 wafer head self-drilling drywall screw (see p.8) to secure clip. 4. Connect drop wire or chains through the eye of the clip. Ultimate Load 2.2kN Recommended Load* 0.5kN * The recommended load is when the clip is not fixed by a self drilling screw (e.g. our WHSDZ12, see page 8). When fixed with a self drilling wafer head screw higher tensile values can be achieved. We strongly recommend that site testing is undertaken to allow an accurate recommended load can be calculated. Our product datasheets provide full technical information and are available from our Sales Office or downloaded from our website. Acoustic Brackets EVAB1 Acoustic Bracket 70mm Box Quantity: 100 Carton Quantity: 200 Tough hangers used with timber joist ceilings/floors and ceiling systems for increased acoustic performance. Ceiling Brackets CB1 Ceiling Bracket 25 x 25mm Box Quantity: 100 Carton Quantity: 2,700 See also: Ceiling Anchors (p. 48) Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk Page 55

58 Drill & Drive Bits Bit Holders MB1060 Magnetic Bit Holder 10 x 60mm Drive Kits ED1000 Tek and Masonry Screw Drive Kit 1/4 Drive Socket 5/16 Drive Socket 3/16 Drive Socket 3mm Allen Key PH2 Screwdriver Insert Bit Drive Sleeve PH3 Screwdriver Insert Bit MES5/16 Drive Sockets MES5/16 Magnetic Drive Socket 5/16 AF Length (mm): 65 MES10A/F Magnetic Drive Socket Length (mm): 65 Pack Qty: 10 Extended Screwdriver Insert Bits PH2120 (PH Drill Insert Bit 2) Length (mm): 120 / Pack Qty: 10 PH2141 (PH Drill Insert Bit 2) Length (mm): 141 / Pack Qty: 10 PH2150 (PH Drill Insert Bit 2) Length (mm): 150 / Pack Qty: 10 PH2152 (PH Drill Insert Bit 2) Length (mm): 152 / Pack Qty: 10 PH2154 (PH Drill Insert Bit 2) Length (mm): 154 / Pack Qty: 10 PH2175 (PH Drill Insert Bit 2) Length (mm): 175 / Pack Qty: 10 R2141 (Square Drive Drill Insert Bit) Length (mm): 141 / Pack Qty: 10 Page 56 Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk

59 DIBPH1 Screwdriver Insert Bit - Phillips 1 Length (mm): 25 Pack Qty: 100 DIBPH2 Screwdriver Insert Bit - Phillips 2 Length (mm): 25 Pack Qty: 100 DIBDSP Screwdriver Insert Bit - Drywall Length (mm): 25 Pack Qty: 50 DIBPO2 Screwdriver Insert Bit - Pozi 2 Length (mm): 25 Pack Qty: 100 DIBSR Screwdriver Insert Bit - Sq. Drive Length (mm): 25 Pack Qty: 50 Ask For Evolution Drill & Drive Bits Screwdriver Insert Bits PGM Approved SDS Plus SDSH55110 (5.5mm x 110mm) Box Quantity: 50 SDSH6110 (6mm x 110mm) Box Quantity: 50 DIBPH3 Screwdriver Insert Bit - Phillips 3 Length (mm): 25 Pack Qty: 100 DIBPO1 Screwdriver Insert Bit - Pozi 1 Length (mm): 25 Pack Qty: 100 DIBPO3 Screwdriver Insert Bit - Pozi 3 Length (mm): 25 Pack Qty: 100 DIBT030 Screwdriver Insert Bit - Torx 30 Length (mm): 25 Pack Qty: 50 SDSH55160 (5.5mm x 160mm) Box Quantity: 50 SDSH6160 (6mm x 160mm) Box Quantity: 50 Drill & Drive Bits/PGM Approved SDS Plus SDSH65160 (6.5mm x 160mm) Box Quantity: 50 SDSH8160 (8mm x 160mm) Box Quantity: 50 SDSH6210 (6mm x 210mm) Box Quantity: 60 SDSH8210 (8mm x 210mm) Box Quantity: 50 SDSH8260 (8mm x 260mm) Box Quantity: 50 SDSH10210 (10mm x 210mm) Box Quantity: 50 SDSH10260 (10mm x 260mm) Box Quantity: 40 SDSH12260 (12mm x 260mm) Box Quantity: 40 Premium quality PGM approved drill bits: Extended life: typically last 33% longer than our standard SDS Plus Higher performance with faster drill speed Each drill is stamped with the PGM inspection mark Supplied in individual plastic sleeves for easy display SDSH16260 (16mm x 260mm) Box Quantity: 30 Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk Page 57

60 SDS5110 (5 x 110mm) Working Length (mm): 100 SDS5160 (5 x 160mm) Working Length (mm): 100 SDS55110 (5.5 x 110mm) Working Length (mm): 50 SDS55160 (5.5 x 160mm) Working Length (mm): 100 SDS6110 (6 x 110mm) Working Length (mm): 50 SDS6160 (6 x 160mm) Working Length (mm): 100 SDS65110 (6.5 x 110mm) Working Length (mm): 50 Ask For Evolution Drill & Drive Bits SDS Plus Drill Bits SDS6210 (6 x 210mm) Working Length (mm): 150 SDS65160 (6.5 x 160mm) Working Length (mm): 100 SDS6260 (6 x 260mm) Working Length (mm): 200 SDS65210 (6.5 x 210mm) Working length: 150 SDS65260 (6.5 x 260mm) Working Length (mm): 200 A high quality, twin fluted SDS+ carbide drill bit for the rapid drilling of holes in masonry. Supplied on individual hangers for easy display. SDS7160 (7 x 160mm) Working Length (mm): 100 SDS7260 (7 x 260mm) Working Length (mm): 200 SDS8160 (8 x 160mm) Working Length (mm): 100 SDS8210 (8 x 210mm) Working Length (mm): 150 SDS8260 (8 x 260mm) Working Length (mm): 200 SDS10160 (10 x 160mm) Working Length (mm): 100 SDS10210 (10 x 210mm) Working Length (mm): 150 SDS12160 (12 x 160mm) Working Length (mm): 100 SDS10260 (10 x 260mm) Working Length (mm): 200 SDS10460 (10 x 460mm) Working Length (mm): 400 SDS12210 (12 x 210mm) Working Length (mm): 150 SDS12260 (12 x 260mm) Working Length (mm): 200 SDS12460 (12 x 460mm) Working Length (mm): 400 Page 58 Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk

61 Drill & Drive Bits SDS Plus Drill Bits SDS14260 (14 x 260mm) Working Length (mm): 200 SDS16260 (16 x 260mm) Working length (mm): 200 SDS18260 (18 x 260mm) Working Length (mm): 200 SDS14460 (14 x 460mm) Working Length (mm): 400 SDS16460 (16 x 460mm) Working Length (mm): 400 Drill & Drive Bits/SDS Plus Drill Bits SDS18460 (18 x 460mm) Working length (mm): 400 SDS20260 (20 x 260mm) Working length (mm): 200 SDS20460 (20 x 460mm) Working Length (mm): 400 SDS22260 (22 x 260mm) Working Length (mm): 200 SDS22460 (22 x 460mm) Working Length (mm): 400 SDS25260 (25 x 260mm) Working length (mm): 200 SDS25460 (25 x 460mm) Working Length (mm): 400 SDS (4.35 x 180mm) SDS Plus Drill Bit with Hex Shank Drive / Working Length (mm): 100 SDS (5.15 x 180mm) SDS Plus Drill Bit with Hex Shank Drive / Working Length (mm): 100 SDS (5.15 x 205mm) SDS Plus Drill Bit with Hex Shank Drive / Working Length (mm): 125 Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk Page 59

62 Accessories/Mesh, Tapes & Sealants Fibreglass Mesh FM50 Fibreglass Mesh 1 x 50m Mesh Size: 2.5 x 2.5mm Weight (g/m²): 60 Box Quantity: 4 rolls Technical Data Yarn Tex Warp 528 Yarn Tex Weave 528 Mesh Size (mm) 2.5 x 2.5 Cloth Thickness 0.52 Density Uncoated (G/M²) 105 Density Coated (G/M²) 128 Tensile Strength Crosswise (N/5Cm X 20Cm) >1300 Tensile Strength Lengthwise (N/5Cm X 20Cm) >1300 Woven Structure Union Content Of Resin 18 Evolution fibreglass mesh is made from alkali-resistant fabric, based on C-glass or E-glass woven fabric and coated by acrylic acid copolymer liquid, possesses the properties of fine alkali-resistant, high strength, good cohesion with resin, excellent in locating etc. It is ideal for construction application, mainly in reinforcement of cement, plastic, pitch, stone, wall materials, roofing and so on. Drylining Tapes CFT30 Heavy Duty Metal Corner Flex Tape Roll Width: 52mm Roll Length: 30m Box Qty: 10 rolls Designed for forming reveals in semi-protected areas such as window openings or forming obscure angles. Two galvanized metal strips fold around external corners and reveals to form a clean, straight line. Suitable for forming internal and external corners in semi-protected areas. Easy to apply, same procedure as standard joint tape. Offers protection against minor impact damage. Page 60 Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk

63 Accessories/Tapes & Sealants Intumescent and Acoustic Acrylic Sealant EVIA310 Intumescent and Acoustic Acrylic Sealant 310ml Fire Rating: Up To 4 Hours Acoustic Rating (Double Seal): Up To 48dB Acoustic Rating (Single Seal): Up To 46dB Colour: White Box Quantity: 25 EVIA900 Intumescent and Acoustic Acrylic Sealant 900ml Fire Rating: Up To 4 Hours Acoustic Rating (Double Seal): Up To 48dB Acoustic Rating (Single Seal): Up To 46dB Colour: White Box Quantity: 12 Accessories/Mesh, Tapes & Sealants Evolution intumescent and acoustic sealant is a one part emulsion designed to resist the passage of both fire and sound. In normal use the sealant remains flexible enough to retain the sound reduction index of a structure. In the event of fire it will intumesce and form a char, sealing the gap for up to 4 hours. : Use rubber gloves and protection to avoid skin and eye contact. Ensure all surfaces are clean, dry and free from grease and dust. Use masking tape to ensure a neat line. Tool the joint within five minutes of application to give a good contact between sealant and substrate. Remove masking tape immediately after tooling. Fire Rating Acoustic Rating (Double Seal) Acoustic Rating (Single Seal) Movement Colour Slump Overpaintable Weatherability Drying Time Cure Time Properties Up to 4 hours Up to 48dB Up to 46dB Up to 20% of original joint size White Nil up to 20mm When fully cured Water and UV resistant when fully cured Tack free in 15 minutes 1.5mm per 24 hours Joint Size Linear Metres Per Cartridge 6 x 10mm x 10mm x 15mm x 15mm x 15mm 0.7 Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk Page 61

64 Accessories Tek Colour Caps Available in 16mm, 19mm, 29mm and 32mm The cap fits over your fastener to act as an additional weather seal, further increasing the performance of that fixing and preventing corrosion. Colour Chart Black Meadowland Britannia Moss Green White Moorland Green Cornflower Prologis Green Terracotta Olive Green Brown Beige Glen Green Petra Juniper Green White Oyster Pale Peppermint Poppy Red Sage Ivory Squirrel Tangerine Jade Flame Red Slate Grey Beige Pinewood Rubine Anthracite Vandyke Brown Eau de Nil Burano Oyster Bamboo Verona Ultra Marine Dusty Grey Saffron Albatross Sargasso Quartz Goosewing Grey Merlin Grey Gentian Blue Pale Brown Mushroom Raven/ Slate Blue Mountain Hamlet Svelte Grey Wedgewood Blue Bahama/ Sky White (Creamy) Honesty Ocean Blue Caprice White Alum Aztec Solent Blue Heritage Dark Silver Pure White Metallic Silver Bleu Concorde NOTE. COLOUR CHARTS ARE FOR GUIDANCE ONLY. IF UNFAMILIAR WITH THE COLOURS CONTACT US FOR A SAMPLE. Washers BW16 EPDM Bonded Washer 16mm Ø Box Quantity: 500 BW19 EPDM Bonded Washer 19mm Ø Box Quantity: 500 SS16 Stainless Steel Washer 16mm Ø Box Quantity: 500 Page 62 Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk

65 Decking Screws DSFHC50 (4.2 x 50mm) Decking Screw Drive: Square Box Quantity: 200 / Carton Quantity: 6,000 DSFHC63 (4.2 x 63mm) Decking Screw Drive: Square Box Quantity: 200 / Carton Quantity: 4,000 Decking Screws DSFHC75 (4.2 x 75mm) Decking Screw Drive: Square Box Quantity: 200 / Carton Quantity: 3,200 Stainless Steel Decking Screws DS-SS 50 (4.2 x 50mm) Stainless Steel Decking Screw Drive: Square Box Qty: 200 / Carton Qty: 6,000 DS-SS 63 (4.2 x 63mm) Stainless Steel Decking Screw Drive: Square Box Qty: 200 / Carton Qty: 4,000 Designed for fixing timber decking and fencing. Our standard decking screws have a corrosion-resistant green, 1000 hour Evoshield TM coating making them suitable for all-weather outdoor applications such as patios, fencing, decks and walkways. Stainless steel decking screws should be used in coastal areas and when fixing timber with aggressive ACQ or salt based timber treatment or in hardwoods with high tannin content. Pro Tip Pre-drill before use in hardwood. Stick-fit, square socket recess, reduces dropped or misaligned screws, providing fast, efficient fastening. Deep coarse thread configuration ensures low-torque installation, with exceptional draw down, for maximum holding power. Made from large diameter root wire for greater shear strength. Flat head, c/w reaming nibs, gives a flush, clean, attractive countersink that locks the screw in tight. Proprietary corrosion-resistant 1,000 hour rated green Evoshield TM coating for all weather outdoor applications, from patios, fencing, decks, walkways etc. Resistant to salt, acid, alkali, corrosive gas, cathodic corrosion. Thermal resistant. Hydrogen embrittlement free. Type 17 cutter point grabs on contact, provides rapid advancement and means there is no need to pre-drill. Delivers power tapping capability in all woods and new generataion wood composites. Also available in stainless steel for use in aggressively treated timbers or hardwoods with high tannin content. Contractor-convenient boxes, come with insert bit, sturdy, heavy duty cartons for job site and inventory management Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk Page 63

66 Evoshield TM Coating TM Our products with Evoshield TM coating have a salt spray rating of either 1,000 or 500 hours. Please refer to the relevant page in our catalogue or contact us for information on the salt spray rating for a specific product. Description: Evoshield TM metal finish is a non-organic, high grade metal surface processing technology that prevents corrosion. It consists of three layers: the first layer; a metallic zinc layer, the second; a high grade anti-corrosion chemical conversion film, and a third outer layer; baked ceramic surface coating. The distinguishing feature of Evoshield TM is the tight joining of the baked ceramic surface coating and the chemical conversion film. These layers are bonded together through chemical reactions, and this unique method of combining layers results in a rigid combination of the coating films. Evoshield TM treatment does not attribute its anti-corrosion properties to merely a single material, but the synergy of these three layers, which combined have superb rustproof qualities. Compatible with metal coated and painted surfaces, fasteners coated with Evoshield TM are resistant to acid and alkaline attack, galvanic corrosion and hydrogen embrittlement. These fasteners conform to corrosive gas test standard (Kesternich) DIN50018 SFW-0.25 and give a Salt Spray Fog Test to exceed (JISZ2731) 504/ 1,000 hours. Features: Superior corrosion resistance. Excellent against gas, weathering and other corrosive factors including salt water. Resistant to acid and alkaline attack, galvanic corrosion and hydrogen embrittlement. Corrosion resistance against scratches. Composite layers minimise the effect of scratches on the protection coating. Electrolytic corrosion resistance. Less contact corrosion with other metals. Low process temperature. The drying temperature below 200ºC protects products from metallo graphic changes. A variety of colours to suit different purposes. Paintable Evoshield TM Coating colour samples (from Evolution products): Silver/Grey Evoshield TM Blue Evoshield TM Green Evoshield TM Page 64 Sales Tel: +44(0) F: +44(0) E: sales@evolutionfasteners.co.uk