4isofast Product code Page

Transcription

1 Fasteners, stress plates and plastic sleeves isofast Product code Page Carbon steel DT.3 Austenitic stainless steel S.6 Carbon steel TI.11 Drill bits SDS.13 isotak Product code Page Carbon steel Austenitic stainless steel Carbon steel DT 5 S 5 TI-T Drill accessories ZVK / ZAK.23 Carbon steel TIA-T isoweld Product code Page Carbon steel DT.30 Austenitic stainless steel S.3 Carbon steel TI-T25.38 Drill bits SDS.1 Carbon steel Austenitic stainless steel Carbon steel DT FI- S FI- TI-T25 FI Drill accessories ZVK / ZAK.53 Carbon steel TIA-T25 FI-.5 03/201. 1

2 SPIKE twister: Faster, easier fixing into concrete Fixing into concrete with conventional methods is at best complicated. Using plug free fasteners however considerably improves installation time. The SPIKE system has been developed and optimised by SFS intec over recent years and has a proven track record with respect to its fast installation, security of application and ease of use. The SPIKE twister is part of the isofast, isotak and isoweld system. The convincing advantages of the SPIKE twister fastening systems Tough anchoring due to all round force distribution Simple one-piece fastener No need to fit and adjust plugs educed diameter pilot holes required educed drilling depth Maximum corrosion resistance Available in austenitic stainless steel Highly fire resistant Absolutely free from vibration Simple procedure: pre-drill and drive in, secure and stable Plug-free fixing directly into concrete Fixing into concrete using the SPIKE system is even more secure and efficient. The unique spiral tip of the SPIKE twister fastener exerts all round pressure within the pilot hole. The continuous pre-tensioning due to the rotary force transmission results in a considerably improved pull-out performance. Installation is so simple: Drill, hammer home job done High pull-out resistance from concrete and similar aggregate materials The SPIKE twister is vibration free, corrosion proof and offers extremely high fire resistance. The entire range is available in austenitic stainless steel, making this fastener ideal for critical applications including those with chemically aggressive atmospheric conditions or roof renovation projects /201

3 Carbon steel fastener isofast SPIKE twister DT isofast SPIKE twister DT Technical information Application For the fastening of waterproof membrane and insulation to solid, dense concrete of minimum grade C12/15. Material Fastener DT Case hardened carbon steel Durocoat corrosion protection: esistance at 15 cycles Kesternich test according to ETAG D.3.1. and FM Approval Standard 70 requirements Environment-friendly, free of chromium VI ID-70x70 / IF/IG-C-82x0 / ID-82x0 Steel 1,0 mm, zinc plated esistance at 15 cycles Kesternich test according to ETAG D.3.1. and FM Approval Standard 70 requirements ID-70x70 IF/IG-C-82x0 ID-82x0 Stress plate for insulation, hole diameter 7,5 mm Stress plate for membrane and insulation on hard substrates, hole diameter 7,5 mm Stress plate for membrane and insulation, hole diameter 7,5 mm Tools and accessories ecommendation for pre-drilling ZD15 Use hammer drill with weight class 2-3 kg, impact energy 2,5 J Setting tool for the installation of SPIKE twister fasteners 03/201. 3

4 Carbon steel fastener Flat roof fastening systems for concrete deck isofast SPIKE twister DT Order information d Mushroom head, 51 mm Ø 11,0 mm 6 mm Ø 9,7 mm K K clamping length M magazine loaded d thread diameter length T thread length t thickness of structure All measures in mm Order code 28 Product / Application Approval Type d K Drill bits Application information Carbon steel min. 60 mm K max. Sd Sd (Setting depth): min. 25 mm Thickness concrete deck t: min. 60 mm. Concrete quality minimum C12/15. Insulation compressive strength at 10% compression min. 0,07 N/mm². Depth of pilot hole to be min.15 mm deeper than the setting depth of the SPIKE twister, depending on site conditions. ID-70X70 IF/IG-C-82X0 ID-82X0 ID IF/IG-C ID. 03/201

5 Carbon steel fastener isofast SPIKE twister DT Order information d Mushroom head Ø 11,0 mm K K clamping length M magazine loaded d thread diameter length T thread length t thickness of structure All measures in mm Order code 38 Product / Application Approval Type d K Drill bits Application information Carbon steel min. 60 mm K max. Sd Sd (Setting depth): min. 32 mm Thickness concrete deck t: min. 60 mm. Concrete quality minimum C12/15. Insulation compressive strength at 10% compression min. 0,07 N/mm². Depth of pilot hole to be min. 15 mm deeper than the setting depth of the SPIKE twister, depending on site conditions. ID-70X70 IF/IG-C-82X0 ID-82X0 ID IF/IG-C ID 03/201. 5

6 Austenitic stainless steel fastener Flat roof fastening systems for concrete deck isofast SPIKE twister S isofast SPIKE twister S Technical information Application For the fastening of waterproof membrane and insulation to solid, dense concrete of minimum grade C12/15. For applications with internal relative humidity higher than 70%, chemically agressive atmospheres / conditions, locations with agressive local conditions (e.g. coastal environments). For refurbishment applications with unknown condition of the existing build-up or build-up with abrasive layers that may damage the corrosion protection. If extended design life / warranty is required. Material Fastener S Austenitic stainless steel, grade AISI 316, European Standard 1.01, grade A ID-70x70 / IF/IG-C-82x0 / ID-82x0 Steel 1,0 mm, zinc plated esistance at 15 cycles Kesternich test according to ETAG D.3.1. and FM Approval Standard 70 requirements ID-70x70 IF/IG-C-82x0 ID-82x0 Stress plate for insulation, hole diameter 7,5 mm Tools and accessories ecommendation for pre-drilling Stress plate for membrane and insulation on hard substrates, hole diameter 7,5 mm ZD15 Stress plate for membrane and insulation, hole diameter 7,5 mm Use hammer drill with weight class 2-3 kg, impact energy 2,5 J Setting tool for the installation of SPIKE twister fasteners. 6 03/201

7 Austenitic stainless steel fastener isofast SPIKE twister S Order information d Mushroom head, 51 mm Ø 11,0 mm 6 mm Ø 9,7 mm K K clamping length M magazine loaded d thread diameter length T thread length t thickness of structure All measures in mm Order code S- 28 Product / Application Approval Type d K Drill bits Application information Stainless steel S- S- S- S- S- S- S- S min. 60 mm K max. Sd Sd (Setting depth): min. 25 mm Thickness concrete deck t: min. 60 mm. Concrete quality minimum C12/15. Insulation compressive strength at 10% compression min. 0,07 N/mm². Depth of pilot hole to be min. 15 mm deeper than the setting depth of the SPIKE twister, depending on site conditions. Availability on request. ID-70X70 IF/IG-C-82X0 ID-82X0 ID IF/IG-C ID 03/201. 7

8 Austenitic stainless steel fastener Flat roof fastening systems for concrete deck isofast SPIKE twister S Order information d Mushroom head Ø 11,0 mm K K clamping length M magazine loaded d thread diameter length T thread length t thickness of structure All measures in mm Order code S- 152 Product / Application Approval Type d K Drill bits Application information Stainless steel S- S- S- S- S- S- S min. 60 mm K max. Sd Sd (Setting depth): min. 32 mm Thickness concrete deck t: min. 60 mm. Concrete quality minimum C12/15. Insulation compressive strength at 10% compression min. 0,07 N/mm². Depth of pilot hole to be min. 15 mm deeper than the setting depth of the SPIKE twister, depending on site conditions. Availability on request. ID-70X70 IF/IG-C-82X0 ID-82X0 ID IF/IG-C ID. 8 03/201

9 Carbon steel fastener Flat roof fastening systems for concrete deck isotak SPIKE twister DT / 5 isotak SPIKE twister DT / 5 Technical information Application For the fastening of waterproof membrane and insulation to solid, dense concrete of minimum grade C12/15. Material Fastener DT Case hardened carbon steel Durocoat corrosion protection: esistance at 15 cycles Kesternich test according to ETAG D.3.1. and FM Approval Standard 70 requirements Environment-friendly, free of chromium VI Sleeve 5 High quality polypropylene, PP Tools and accessories Tool recommendation M-500 / M-750 For pre-drilling: Use hammer drill with weight class 2-3 kg, impact energy 2,5 J For installation: Use hammer drill with weight class 2-3 kg, impact energy 2,5 J, without rotation function, to hammer in the SPIKE twister Mechanical driving tool to hammer in the SPIKE twister. 1 03/201

10 Carbon steel fastener isotak SPIKE twister DT / 5 Order information d Mushroom head Ø 9,7 mm K clamping length M magazine loaded d thread diameter length T thread length t thickness of structure All measures in mm Order code 6 Product / Application Approval Type d K Application information Carbon steel min. 60 mm K max. Sd Sd (Setting depth): min. 25 mm Thickness concrete deck t: min. 60 mm. Concrete quality minimum C12/15. Depth of pilot hole to be min. 15 mm deeper than the setting depth of the SPIKE twister, depending on site conditions. Plastic K see combination table 03/

11 Austenitic stainless steel fastener Flat roof fastening systems for concrete deck isotak SPIKE twister S / 5 isotak SPIKE twister S / 5 Technical information Application For the fastening of waterproof membrane and insulation to solid, dense concrete of minimum grade C12/15. For applications with internal relative humidity higher than 70%, chemically agressive atmospheres / conditions, locations with agressive local conditions (e.g. coastal environments). For refurbishment applications with unknown condition of the existing build-up or build-up with abrasive layers that may damage the corrosion protection. If extended design life / warranty is required. Material Fastener S Austenitic stainless steel, grade AISI 316, European Standard 1.01, grade A Sleeve 5 High quality polypropylene, PP Tools and accessories Tool recommendation M-500 / M-750 For pre-drilling: Use hammer drill with weight class 2-3 kg, impact energy 2,5 J For installation: Use hammer drill with weight class 2-3 kg, impact energy 2,5 J, without rotation function, to hammer in the SPIKE twister Mechanical driving tool to hammer in the SPIKE twister /201

12 Austenitic stainless steel fastener isotak SPIKE twister S / 5 Order information d Mushroom head Ø 9,7 mm K clamping length M magazine loaded d thread diameter length T thread length t thickness of structure All measures in mm Order code S- 6 Product / Application Approval Type d K Application information Stainless steel S- S- S- S K max. Sd min. 60 mm Sd (Setting depth): min. 25 mm Thickness concrete deck t: min. 60 mm. Concrete quality minimum C12/15. Depth of pilot hole to be min. 15 mm deeper than the setting depth of the SPIKE twister, depending on site conditions. Availability on request. Plastic K see combination table 03/

13 Combination table Flat roof fastening systems for concrete deck 5 / DT / S Selection of the correct fastener and sleeve combination Combination sleeve 5 and SPIKE twister SPIKE twister S-** K (mm) **If a length is not available, take the next length. Fastener range see chapter. K S- min. 15 mm* 370 min. 25 mm * thickness vapour barrier to be considered K = total roof build-up between top edge substrate and top edge membrane K = thickness vapour barrier + thickness insulation + thickness membrane Sleeve length Sleeve length Sleeve length 365 Sleeve length 65 Sleeve length 35 Sleeve length 15 Sleeve length 325 Sleeve length 165 Sleeve length 135 Sleeve length 105 Sleeve length 85 Sleeve length 285 Sleeve length 255 Sleeve length 225 Sleeve length 185 Sleeve length 195 Sleeve Fastener S Setting depth*** (mm) Calculation: oof build-up (K) - Sleeve length () + 38 mm = min. length Type of fastener Example: 100 mm - 85 mm + 38 mm = 53 mm -> 6 ***Depth of pilot hole to be 15 mm deeper than the setting depth, depanding on site conditions /201