TAPPING SCREWS 1-1 TAPPING SCREWS PHILLIPS OVAL. 1 General Fasteners HEAD ZINC BLACK SIZE SIZE CHROME CHROMATE OXIDE
|
|
|
- Kimberly Ross
- 5 years ago
- Views:
Transcription
1 TAPPING SCREWS TAPPING SCREWS PHILLIPS OVAL HEAD ZINC BLACK SIZE SIZE CHROME CHROMATE OXIDE #4 x 3/8"... REG #4 x 1/2"... REG #4 x 5/8"... REG #4 x 3/4"... REG #4 x 1"... REG Per Box Unless Otherwise Noted In Parenthesis #6 x 1/2"... REG #6 x 5/8"... REG #6 x 3/4"... REG #6 x 1"... REG #6 x 1-1/4"... REG #8 x 3/8"...# #8 x 1/2"...# #8 x 1/2"... REG #8 x 5/8"...# #8 x 3/4"...# #8 x 3/4"... REG #8 x 1"...# #8 x 1"... REG #8 x 1-1/4"...# #8 x 1-1/4"... REG #8 x 1-1/2"...# #8 x 1-1/2"... REG #8 x 1-3/4"...# #8 x 2"...# #8 x 2"... REG #8 x 2-1/2"...# #10 x 1/2"...# #10 x 1/2"...# #10 x 1/2"... REG #10 x 5/8"...# #10 x 3/4"...# #10 x 3/4"...# #10 x 3/4"... REG #10 x 1"....# #10 x 1".....# #10 x 1"..... REG #10 x 1-1/4"...# #10 x 1-1/4"... REG #10 x 1-1/2"...# #10 x 1-1/2"...# #10 x 1-3/4"... REG #12 x 3/4"... REG #12 x 1"...#
2 TAPPING SCREWS TAPPING SCREWS PHILLIPS PAN HEAD ZINC BLACK SIZE CHROMATE OXIDE #4 x 1/4" #4 x 3/8" #4 x 1/2" Per Box Unless Otherwise Noted In Parenthesis #6 x 1/4" #6 x 3/8" #6 x 1/2" #6 x 3/4" #6 x 1" #6 x 1-1/4" #6 x 1-1/2" #8 x 1/4" #8 x 3/8" #8 x 1/2" #8 x 5/8" #8 x 3/4" #8 x 1" #8 x 1-1/4" #8 x 1-1/2" #10 x 3/8" #10 x 1/2" #10 x 5/8" #10 x 3/4" #10 x 1" (50) #10 x 1-1/4" (50) #10 x 1-1/2" #10 x 2" #12 x 1/2" #12 x 5/8" #12 x 3/4" #12 x 1" #12 x 1-1/4" #12 x 1-1/2" #14 x 1/2" #14 x 3/4" #14 x 1" #14 x 1-1/4" #14 x 1-1/2" TAPPING SCREWS PHILLIPS FLAT HEAD PROD# SIZE BOX x 2" x 1" x 1-1/2" x 2" x 2-1/2" Phone: (877) Fax: (866) Visit us srfast.com 1-2
3 TAPPING SCREWS SIZE x HEAD PRODUCT LENGTH SIZE NO. HEX HEAD TAPPING SCREWS NO WASHER ZINC PLATED #10 x 1-1/2"...5/16" (100) #12 x 1"...5/16" (100) #14 x 3/4"...7/16" (100) #14 x 1-1/2"...7/16" (100) 5/16" x 3/4"...1/2" (50) Box Qty. In Parenthesis SELF DRILLING SCREWS HARDENED ZINC PLATED SIZE x HEX PHILLIPS PAN HEAD FLAT HEAD LENGTH POINT WASHER HEAD PAN HEAD SQUARE SQUARE #8 x 1/2"...# (100) (100) (100) #8 x 3/4"...# (100) (100) (100) (100) #8 x 1"...# (100) (100) (100) (100) #8 x 1-1/4"...# (50) #8 x 1-1/2"...# (50) (100) (100) #8 x 2"...# (100) #10 x 1/2"...# (100) (100) #10 x 3/4"...# (100) (100) (100) #10 x 1"...# (100) (100) (100) #10 x 1-1/4"...# (50) #10 x 1-1/2"...# (50) (100) #12 x 1"...# (25) #12 x 1-1/4"...# (25) #12 x 1-1/2"...# (25) #14 x 3/4"...# (100) #14 x 1"...# (100) #14 x 1-1/4"...# (25) #14 x 1-1/2"...# (100) #14 x 2"...# (100) Box Qty. In Parenthesis PROD# SIZE BOX #8-18 x 1/2" #8-18 x 3/4" #8-18 x 1" PHILLIPS ROUND WASHER HEAD TAPPING SCREW PHOSPHATE AND OIL (BLACK) TYPE "AB" 1/2" WASHER HEAD 1-3
4 TAPPING SCREWS PHILLIPS OVAL HEAD COUNTERSUNK WASHER TAPPING SCREWS WASHER LOOSE FROM HEAD SIZE x CHROME BLACK LENGTH PLATED BOX PHOS BOX #6 x 5/8" #6 x 3/4" #6 x 1" #8 x 5/8" #8 x 3/4" #8 x 1" #8 x 1-1/4" PHILLIPS OVAL HEAD FLUSH TYPE WASHER TAPPING SCREWS WASHER LOOSE FROM HEAD #10 x 1/2" #10 x 5/8" #10 x 3/4" #10 x 1" #10 x 1-1/4" SIZE x LENGTH PROD# BOX PLATING #8 x 5/8" Chrome #8 x 5/8" Black #8 x 11/16" Black #8 x 7/8" Chrome #8 x 1-1/4" Black PHILLIPS OVAL HEAD SEMS TEK FINISHING SCREW (With No. 2 Drill Point) WASHER BLACK SIZE TYPE* CHROME PHOSPHATE BOX #8 x 5/8"... FL #8 x 5/8"... CS #8 x 3/4"... CS #8 x 1"... CS #8 x 1-1/4"... CS Countersunk Flush * FL = Flush, CS = Countersunk PHILLIPS FLAT TOP WASHER HEAD TAPPING SCREWS WASHER SOLID TO HEAD BLACK E-COAT SIZE x HEAD LENGTH SIZE PROD# BOX #8 x 1/2"... 7/16" #8 x 5/8"... 7/16" #8 x 3/4"... 7/16" #8 x 1"... 7/16" #8 x 1"... 1/2" #8 x 1-1/4"... 7/16" #8 x 1-1/2"... 7/16" #10 x 1/2"... 7/16" #10 x 3/4"... 15/32" #10 x 1"... 1/2" Phone: (877) Fax: (866) Visit us srfast.com 1-4
5 HEX HEAD SCREWS HEX WASHER HEAD SHEET METAL SCREWS WASHER SOLID TO HEAD ZINC CHROMATE HEAD SIZE SIZE PROD# #8 x 1/2"...1/4" (100) #8 x 1"...1/4" (100) #8 x 1-1/4"...1/4" (100) #8 x 1-1/2"...1/4" (100) #8 x 2"...1/4" (100) #10 x 1/2"...5/16" (100) #10 x 3/4"...5/16" (100) #10 x 1"...5/16" (100) #10 x 1-1/4"...5/16" (100) #10 x 1-1/2"...5/16" (100) #10 x 2"...5/16" (100) #12 x 3/4"...5/16" (100) #12 x 1"...5/16" (100) #12 x 1"...5/16" (1000) HEX WASHER HEAD SHEET METAL SCREW WASHER LOOSE FROM HEAD ZINC CHROMATE #14 x 1/2"...3/8" (100) #14 x 3/4"...3/8" (100) #14 x 3/4"...3/8" (500) #14 x 1"...3/8" (100) #14 x 1-1/4"...3/8" (50) #14 x 1-1/2"...3/8" (50) 5/16" x 3/4"...7/16" (50) 5/16" x 1"...7/16" (50) 5/16" x 1-1/2"...7/16" (50) Box Qty. In Parenthesis SIZE x HEAD WASHER LENGTH SIZE OD PROD# #12 x 3/4"...7/16"... 5/8" (50) #14 x 3/4"...3/8"... 5/8" (50) #14 x 1"...3/8"... 21/32" (50) #14 x 1-1/2"...7/16"... 21/32" (50) 5/16" x 1"...7/16"... 11/16" (50) 5/16" x 1-1/2"...7/16"... 11/16" (50) Box Qty. In Parenthesis 1-5
6 TORX DRIVE SCREWS TORX DRIVE SCREWS (STAINLESS STEEL) RUST RESISTANT Meets OEM Specifi cations TORX OVAL HEAD SCREWS TRIM HEAD TORX PAN HEAD SCREWS METRIC SIZE FINISH PROD# 4.2mm x 20mm...CHROME (50) 4.2mm x 20mm...BLACK (50) 4.2mm x 30mm...CHROME (50) 4.2mm x 30mm...BLACK (50) 4.2mm x 35mm...BLACK (50) 4.2mm x 40mm...CHROME (50) 4.2mm x 55mm...CHROME (50) METRIC SIZE FINISH PROD# 4.2mm x 13mm...CHROME (50) 4.2mm x 20mm...BLACK (50) 4.2mm x 25mm...CHROME (50) 4.2mm x 25mm...BLACK (50) 4.2mm x 55mm...CHROME (50) Box Qty. In Parenthesis Box Qty. In Parenthesis TORX DRIVE SCREWS (HARDENED STEEL) TORX OVAL HEAD SCREWS METRIC SIZE FINISH PROD# 4.2mm x 16mm...CHROME (50) 4.2mm x 16mm...BLACK (50) 4.2mm x 20mm...CHROME (50) 4.2mm x 30mm...CHROME (50) 4.2mm x 30mm...BLACK (50) 4.2mm x 35mm...CHROME (50) 4.2mm x 60mm...CHROME (50) 4.2mm x 70mm...BLACK (50) Box Qty. In Parenthesis Phone: (877) Fax: (866) Visit us srfast.com 1-6
7 MACHINE SCREWS PROD# SIZE BOX x 1/2" x 3/4" x 1" x 1-1/2" x 3/8" x 1/2" x 3/4" x 1" x 1-1/4" x 1-1/2" x 3/8" x 1/2" x 3/4" x 1" x 1-1/4" x 1-1/2" PROD# SIZE BOX x 1/2" x 3/4" x 1" x 1-1/4" x 1-1/2" x 2" x 1/2" x 3/4" x 1" x 1-1/2" SLOTTED ROUND HEAD MACHINE SCREWS ZINC PLATED STEEL 1/4-20 x 1/2" /4-20 x 3/4" /4-20 x 1" /4-20 x 1-1/2" /4-20 x 2" SLOTTED FILLISTER HEAD MACHINE SCREWS ZINC PLATED STEEL PHILLIPS PAN HEAD MACHINE SCREWS ZINC PLATED STEEL PROD# SIZE BOX x 3/8" x 1/2" x 3/8" PHILLIPS TRUSS HEAD MACHINE SCREWS ZINC PLATED STEEL PROD# SIZE BOX 100 1/4-20 x 3/4" /4-20 x 1" /4-20 x 2" /4-20 x 2-1/2" PROD# SIZE BOX x 1/4" x 3/8" x 1/2" x 1/4" x 5/16" x 3/8" x 1/2" x 3/8" x 1/2" x 1/2" x 3/4" x 1" x 1-1/2" PHILLIPS OVAL HEAD MACHINE SCREWS CHROME PLATED STEEL HEAD PROD# SIZE SIZE BOX x 1/2"... STD x 3/4"... # x 1/2"... STD x 3/4"... STD x 1"... #
8 LICENSE SCREWS - NUTS AND OTHER FASTENERS Box Stainless Steel #14 x 3/4" Phillips Truss Head Box Zinc #14 x 3/4" Slotted Hex Washer Head Hex: 3/8" Ford & GM Zinc #14 x 3/4" Slotted Truss Head Head Dia.: 9/16" Black E-Coat (168 Hours Salt Spray) #14 x 3/4" Slotted Hex Washer Head Hex: 3/8" Washer Head O.D.: 1/2" Ford Zinc Plated #14 x 3/4" Slotted Pan Head Sheet Metal Screw Yellow Zinc 1/4" x 3/4" Phillips Hex Washer Head Screw Yellow Zinc M x 16mm Phillips Hex Washer Head License Plate Screw Zinc 6mm x 16mm Slotted Hex Washer Head Screw Zinc #14 x 1/2" Total Length: 1-1/8" Dealer License Plate Thumb Screw Box Qty Zinc #10 x 5/8" Slotted Truss Washer Head Washer Head O.D.: 1/2" GM , , Chrome M x 20mm (#8 x 25/32") Phillips Pan Head Sems Pozi-Driv Washer O.D.: 12mm (1/2") GM Nylon Screw, Spacer, Washer And Brass Nut License Attachment tkit M6-1.0 x 20mm Slotted Pan Head Head Dia: 12mm (15/32") Hex Width: 10mm (25/64") Washer OD: 12.5mm (1/2") Spacer OD: 19mm (3/4") Toyota Box Qty. 25 Sets Black Nylon mm License Plate Hex Nut Hex Size: 10mm GM Black Nylon mm x 16mm Slotted Pan Head License Plate Screw GM Black Nylon mm x 20mm Slotted Pan Head License Plate Screw GM Phone: (877) Fax: (866) Visit us srfast.com Black Nylon mm x 20mm Phillips Pan Head License Plate Screw GM 1-8
9 LICENSE SCREWS - NUTS AND OTHER FASTENERS Zinc Plated 1/4-20 x 1/2" Slotted Truss Head Machine Screw Dacromet 320 Finish M x 16mm (#14 x 5/8") Duo Drive Truss Head GM Cars & Trucks '65 - UP Zinc & Clear M6-1.0 x 16mm Hex Flange License Plate Screw Flange O.D.: 14mm (9/16") Hex: 10mm Class 10.9 Acura Black E-Coat #14 (1/4 ) x 5/8 Slotted Hex Washer Head License Plate Screw Washer OD: 5/8 Hex: 5/ Black Zinc M6-1.0 x 20mm Phillips Pan Head Import Vehicles & General Use N Bright Zinc #14 (1/4") x 5/8" Washer Dia.: 5/8" Hex A/F: 5/16" Slotted Indented Hex Head Ford & General Purpose Bright Zinc 1/4-20 x 1/2" Slotted Fillister Head Machine Screw M Box N S2 Black E-Coat #14 (1/4") x 5/8" Washer Dia.: 5/8" Hex A/F: 5/16" Slotted Hex Washer Head Ford & General Purpose Black E-Coat (168 Hours Salt Spray) #10 x 3/4" Phillips Flat Top Washer Head License Plate Screw, Trim Screw & General Purpose Washer Hd. O.D.: 1/2" GM Black E Coat (168 Hours Salt Spray) #14 x 3/4" Slotted Truss Head License Plate Screw Head Dia.: 9/16" Ford Zinc 1/4" x 3/4" Phillips Truss Head Screw Head Dia: 6/16" Ford Zinc 1/4-20 x 3/4" Slotted Truss Head Screw Head Dia: 6/16" GM Black Nylon 1/4"-20 x 5/8" Slotted Truss Washer Head License Screw Washer OD: 19/32" GM /16-17 x 7/8 Indented Hex Head Sems Washer OD: 3/4" Hex: 1/2: GM Black Fluorocarbon M6-1.0 x 16mm Hex Head Sems Class 9.8; Hex: 10mm Wshr O.D.: 17mm (21/32") GM Zinc Chromate Plated Hardened Steel 1/4-20 Thread Size Flanged Spin Lock Nut Hex: 7/16" Flange OD: 19/32 General Purpose
10 LICENSE SCREWS - NUTS AND OTHER FASTENERS Box Box Nylon #8 Screw Size License Plate Nut Chrysler Products Black Nylon #12 Screw Size License Plate Nut Chrysler Box Qty Nylon #14 Screw, Hole: 3/8" Split Two Ways Under Head Ford, Mercury '65 - UP General Purpose Nylon License Plate Nut American Motors Cars Nylon #14 (1/4") Screw Size License Plate Nut Split Four Ways Under Head GM SLOTTED PAN HEAD ZINC PLATED STEEL PHILLIPS PAN HEAD ZINC PLATED STEEL PROD# SIZE BOX M6-1.0 x 10mm M6-1.0 x 16mm M6-1.0 x 16mm M6-1.0 x 20mm PROD# SIZE BOX M5-0.8 x 10mm M6-1.0 x 10mm M6-1.0 x 12mm M6-1.0 x 16mm M6-1.0 x 20mm Phone: (877) Fax: (866) Visit us srfast.com 1-10
11 GRADE 5 CAP SCREW CAP SCREWS GRADE 5 ZINC PLATED 120,000 P.S.I. Minimum Tensile Strength 1/4" 1/4"-20 1/4"-28 LENGTH PROD# BOX PROD# BOX 1/2" /4" " /4" /2" /4" " /4" /2" /4" " /2" " * /2" *... 5" *... 6" *... 5/16" 5/16"-18 5/16"-24 1/2" /4" " /4" /2" /4" " /4" /2" /4" " /4" /2" " /2" *... 5" * /2" *... 6" *... 7" *... *NOT A STOCK ITEM 1-11
12 GRADE 5 CAP SCREW CAP SCREWS GRADE 5 ZINC PLATED 120,000 P.S.I. Minimum Tensile Strength 3/8" 3/8"-16 3/8"-24 LENGTH PROD# BOX PROD# BOX 3/4" " /4" /2" /4" " /4" /2" /4"...* *... 3" /2" " /2" " /2" " /16" 7/16"-14 7/16"-20 3/4" " /4" /2" /4" " /4"...*... * /2" /4" *... 3" /4"...*... * /2" " /2" " /2" " * NOT A STOCK ITEM Phone: (877) Fax: (866) Visit us srfast.com 1-12
13 GRADE 5 CAP SCREW CAP SCREWS GRADE 5 ZINC PLATED 120,000 P.S.I. Minimum Tensile Strength 1/2" 1/2"-13 1/2"-20 LENGTH PROD# BOX PROD# BOX 3/4" " /4" /2" /4" " /4" * /2" /4"...*... *... 3" /4"...*... * /2" /4"...*... *... 4" /2" " /2" " /8" 5/8"-11 5/8"-18 1" /4"...*... * /2" /4"...*... *... 2" /4"...*... * /2" " /2" " /2" " " /4" 3/4"-10 3/4"-16 1" /4"...*... * /2" /4"...*... *... 2" /2" " /2" /4"...*... *... 4" /2" " /2" " * NOT A STOCK ITEM 1-13
14 GRADE 8 CAP SCREW CAP SCREWS GRADE 8 YELLOW ZINC PLATED 150,000 P.S.I. Minimum Tensile Strength 1/4" 1/4"-20 1/4"-28 5/16" 5/16"-18 5/16"-24 LENGTH PROD# BOX PROD# BOX 1/2" /4" " /4" /2" /4" " /4" /2" /4" " /2"*...*... *... 1/2" / " /4" /2" /4" " /4" /2" /4" " /4" * * /2" * * " * * /8" 3/8"-16 3/8"-24 3/4" " /4" /2" /4" " /4" /2" /4" " /2" " /2"...*... *... 5"...*... * /2"...*... *... 6"...*... *... * NOT A STOCK ITEM Phone: (877) Fax: (866) Visit us srfast.com 1-14
15 GRADE 8 CAP SCREW CAP SCREWS GRADE 8 YELLOW ZINC PLATED 150,000 P.S.I. Minimum Tensile Strength 7/16" 7/16"-14 7/16"-20 LENGTH PROD# BOX PROD# BOX 3/4" " /4" /2" /4" " /4" /2" /4" " /4" /2" /4" * " /2" " /2"...*... *... 6"...*... *... 1/2" 1/2"-13 1/2"-20 3/4"...*... *... 1" /4" /2" /4" " /4" /2" /4" " /4" /2" /4" " /4" * * /2" " /2" " * NOT A STOCK ITEM 1-15
16 GRADE 8 CAP SCREW CAP SCREWS GRADE 8 YELLOW ZINC PLATED 150,000 P.S.I. Minimum Tensile Strength 9/16" 9/16"-12 9/16"-18 5/8" 5/8"-11 5/8"-18 LENGTH PROD# BOX PROD# BOX 1" /4" /2" /4" " /4" /2"...* /4" " /4" /2" /4" * * " /2" " /2" " " /4" /2" /4" " /4" /2" /4" * " /4" * /2" " /2" " " " * /2" *... 3/4" 3/4"-10 3/4"-16 1"...*... * /4"...* /2" /4" " /4" * /2" /4" * " / * /2" /4" " /2" " /2" " *NOT A STOCK ITEM Phone: (877) Fax: (866) Visit us srfast.com 1-16
17 HEX NUTS GRADE 5 - HEX NUTS STANDARD FINISHED BRIGHT ZINC PLATED HEX USS SAE THREAD WIDTH PROD# PROD# BOX 1/4"...7/16"... USS 1/ SAE 1/ /16"...1/2"... USS 5/ SAE 5/ /8"...9/16"... USS 3/ SAE 3/ /16"...11/16"... USS 7/ SAE 7/ /2"...3/4"... USS 1/ SAE 1/ /16"...7/8"... USS 9/ SAE 9/ /8"...15/16"... USS 5/ SAE 5/ /4"...1-1/8"... USS 3/ SAE 3/ HARDENED - GRADE 8 FINISHED HEX NUTS YELLOW ZINC PLATED HEX USS SAE THREAD WIDTH PROD# PROD# BOX 1/4"...7/16"... USS 1/ SAE 1/ /16"...1/2"... USS 5/ SAE 5/ /8"...9/16"... USS 3/ SAE 3/ /16"...11/16"... USS 7/ SAE 7/ /2"...3/4"... USS 1/ SAE 1/ /16"...7/8"... USS 9/ SAE 9/ /8"...15/16"... USS 5/ SAE 5/ /4"...1-1/8"... USS 3/ SAE 3/ * HARDENED - GRADE 8 NYLON INSERTED HEX NUTS YELLOW ZINC PLATED HEX USS SAE THREAD WIDTH PROD# PROD# BOX 1/4"...7/16"... USS 1/ SAE 1/ /16"...1/2"... USS 5/ SAE 5/ /8"...9/16"... USS 3/ SAE 3/ /16"...11/16"... USS 7/ SAE 7/ /2"...3/4"... USS 1/ SAE 1/ /16"...7/8"... USS 9/ SAE 9/ /8"...15/16"... USS 5/ SAE 5/ /4"...1-1/8"... USS 3/ SAE 3/ *
18 NUTS, MISC MACHINE SCREW HEX NUTS ZINC PLATED PROD# THREAD SIZE HEX WIDTH BOX /16" /16" /8" /8" /16" WASHER NUTS FREE SPINNING HARDENED FLANGED LOCK NUTS (SERRATED) ZINC PLATED PROD# WASHER O.D. BOX "... 3/8" "... 3/8" /4-20"... 5/8" /4-20"... 7/8" /16-18"... 3/4" /8-16"... 7/8" PROD# DESCRIPTION BOX SAE USS /4-20 USS /4-28 SAE /16-18 USS /16-24 SAE /8-16 USS /8-24 SAE /16-14 USS /16-20 SAE NYLON INSERTED LOCK NUTS ZINC PLATED PROD# DESCRIPTION BOX USS SAE /4-20 USS /4-28 SAE /16-18 USS /16-24 SAE /8-16 USS /8-24 SAE /16-14 USS /16-20 SAE /2-13 USS /2-20 SAE /8-11 USS /8-18 SAE /4-10 USS /4-16 SAE WING NUTS ZINC PLATED PROD# DESCRIPTION BOX / Phone: (877) Fax: (866) Visit us srfast.com 1-18
19 WASHERS STANDARD USS FLAT WASHERS ZINC CHROMATE HIGH STRENGTH USS FLAT WASHERS YELLOW ZINC R/C HARDNESS BOLT INSIDE OUTSIDE STANDARD HIGH STRENGTH SIZE PROD# BOX PROD# BOX #10 or 3/16"... 1/4"...9/16" /4"... 5/16"...3/4" /16"... 3/8"...7/8" /8"... 7/16"...1" /16"... 1/2"...1-1/4" /2"... 9/16"...1-3/8" /16"... 5/8"...1-1/2" /8" "...1-3/4" /4"... 13/16"...2" STANDARD SAE FLAT WASHERS ZINC CHROMATE GRADE 8 HARDNESS WASHERS YELLOW ZINC BOLT INSIDE OUTSIDE STANDARD GRADE 8 SIZE PROD# BOX PROD# BOX #6 or 1/8"...5/32"...3/8" #10 or 3/16"...7/32"...1/2" /4"...9/32"...5/8" /16"...11/32"...11/16" /8"...13/32"...13/16" /16"...15/32"...15/16" /2"...17/32"...1-1/16" /16"...19/32"...1-3/16" /8"...21/32"...1-5/16" PROD# BOLT SIZE O.D. BOX #10 or 3/16"...1" /4" /4" /16" /4" /8" /2" FENDER WASHERS ZINC CHROMATE 1-19
20 WASHERS STANDARD SPRING TYPE LOCK WASHER Grade 5 ZINC CHROMATE HIGH ALLOY SPRING TYPE LOCK WASHERS Grade 8 ZINC & YELLOW DICHROMATE PROD# SIZE BOX #6 or 1/8" #8 or 5/32" #10 or 3/16" #12 or 7/32" /4" /16" /8" /16" /2" /16" /8" /4" PART# BOLT SIZE BOX /4" /16" /8" /16" /2" /16" /8" /4" /8" " EXTERNAL AND INTERNAL LOCK WASHERS ZINC CHROMATE INTERNAL TYPE EXTERNAL TYPE SCREW EXTERNAL INTERNAL SIZE PROD# PROD# # # # # # /4" /16" /8" TRIM WASHERS NICKEL ON BRASS COUNTERSUNK TYPE FLANGED TYPE FLUSH TYPE COUNTERSUNK FLANGED FLUSH SIZE PROD# PROD# PROD# BOX No No No No No Phone: (877) Fax: (866) Visit us srfast.com 1-20
21 FRAME MACHINE FASTENERS GRADE 8 HARDENED BOLTS & KITS BOLT ONLY BOLT, WASHER & SIZE PROD. # QTY. NUT KIT PROD. # 1/2-13 x 2" * 1/2-13 x 2-1/2" * 1/2-13 x 3" * 1/2-13 x 3-1/2" * 5/8-11 x 2" * 5/8-11 x 2-1/2" * 5/8-11 x 3" * 5/8-11 x 3-1/2" * 5/8-11 x 4" * 3/4-10 x 5" * *Each Kit contains 10 bolts, 20 SAE washers and 10 nuts except for kit # which contains 4 bolts, 8 SAE washers and 4 nuts. GRADE 8 HEX NUTS SIZE PROD. # BOX 1/ / / GRADE 8 HEX HARDENED SAE FLAT WASHERS BOLT BOX SIZE DIMENSIONS PROD. # QTY 1/2"... 17/32" I.D. x 1-1/16" O.D /8"... 21/32" I.D. x 1-5/16" O.D /4"... 13/16" I.D. x 1-1/2" O.D
22 STAINLESS STEEL FASTENERS ACORN NUT STAINLESS STEEL 18-8 PROD # SIZE BOX / / WING NUTS STAINLESS STEEL 18-8 PROD# SIZE BOX / NYLON INSERT LOCK NUTS STAINLESS STEEL 18-8 PROD# SIZE BOX / / / / / HEX MACHINE NUTS STAINLESS STEEL 18-8 PROD# SIZE BOX / FINISHED HEX NUTS STAINLESS STEEL 18-8 FLAT WASHERS STAINLESS STEEL 18-8 PROD# SIZE BOX # # # /4" /16" /8" /16" /2" FENDER WASHERS STAINLESS STEEL 18-8 PROD# SIZE BOX /16" x 1" /4" x 1-1/4" /16" x 1-1/4" /8" x 1-1/2" PROD# SIZE BOX / / / / / LOCK WASHERS STAINLESS STEEL 18-8 PROD# SIZE BOX # # # /4" /16" /8" /16" /2" Phone: (877) Fax: (866) Visit us srfast.com 1-22
23 STAINLESS STEEL FASTENERS PROD# DESCRIPTION BOX /4-20 x 1/2" /4-20 x 3/4" /4-20 x 1" /4-20 x 1-1/4" /4-20 x 1-1/2" /4-20 x 1-3/4" /4-20 x 2" /4-20 x 2-1/4" /4-20 x 2-1/2" /4-20 x 2-3/4" /4-20 x 3" /4-20 x 3-1/4" /4-20 x 3-1/2" /4-20 x 3-3/4" /4-20 x 4" /4-20 x 4-1/2" /4-20 x 5" /4-20 x 5-1/2" /4-20 x 6" /16-18 x 1/2" /16-18 x 3/4" /16-18 x 1" /16-18 x 1-1/4" /16-18 x 1-1/2" /16-18 x 1-3/4" /16-18 x 2" /16-18 x 2-1/4" /16-18 x 2-1/2" /16-18 x 2-3/4" /16-18 x 3" /16-18 x 3-1/4" /16-18 x 3-1/2" /16-18 x 3-3/4" /16-18 x 4" /16-18 x 4-1/2" /16-18 x 5" /16-18 x 5-1/2" /16-18 x 6" /8-16 x 1/2" /8-16 x 3/4" /8-16 x 1" /8-16 x 1-1/4" /8-16 x 1-1/2" /8-16 x 1-3/4" /8-16 x 2" /8-16 x 2-1/4" /8-16 x 2-1/2" /8-16 x 2-3/4" CAP SCREWS STAINLESS STEEL 18-8 PROD# DESCRIPTION BOX /8-16 x 3" /8-16 x 3-1/4" /8-16 x 3-1/2" /8-16 x 3-3/4" /8-16 x 4" /8-16 x 4-1/2" /8-16 x 5" /8-16 x 5-1/2" /8-16 x 6" /16-14 x 3/4" /16-14 x 1" /16-14 x 1-1/4" /16-14 x 1-1/2" /16-14 x 1-3/4" /16-14 x 2" /16-14 x 2-1/4" /16-14 x 2-1/2" /16-14 x 2-3/4" /16-14 x 3" /16-14 x 3-1/2" /16-14 x 4" /16-14 x 4-1/2" /16-14 x 5" /16-14 x 6" /2-13 x 3/4" /2-13 x 1" /2-13 x 1-1/4" /2-13 x 1-1/2" /2-13 x 1-3/4" /2-13 x 2" /2-13 x 2-1/4" /2-13 x 2-1/2" /2-13 x 2-3/4" /2-13 x 3" /2-13 x 3-1/4" /2-13 x 3-1/2" /2-13 x 3-3/4" /2-13 x 4" /2-13 x 4-1/2" /2-13 x 5" /2-13 x 5-1/2" /2-13 x 6"
24 STAINLESS STEEL FASTENERS MACHINE SCREWS STAINLESS STEEL 18-8 PHILLIPS OVAL PHILLIPS PAN PHILLIPS OVAL SIZE PROD.# BOX 6-32 x 1/2" x 3/4" x 1" x 1-1/4" x 1/2" x 3/4" x 1" x 1-1/4" x 1/2" x 3/4" x 1" x 1-1/4" x 1-1/2" x 1-3/4" x 2" x 2-1/4" x 2-1/2" x 2-3/4" x 3" x 1/2" x 3/4" x 1" x 1-1/4" x 1-1/2" x 1-3/4" x 2" x 2-1/4" x 2-1/2" x 2-3/4" x 3" /4-20 x 1/2" /4-20 x 3/4" /4-20 x 1" /4-20 x 1-1/4" /4-20 x 1-1/2" /4-20 x 1-3/4" /4-20 x 2" /4-20 x 2-1/4" /4-20 x 2-1/2" /4-20 x 2-3/4" /4-20 x 3" PHILLIPS PAN SIZE PROD.# BOX 6-32 x 1/2" x 3/4" x 1" x 1-1/4" x 1/2" x 3/4" x 1" x 1-1/4" x 1/2" x 3/4" x 1" x 1-1/4" x 1-1/2" x 1-3/4" x 2" x 2-1/4" x 2-1/2" x 2-3/4" x 3" x 1/2" x 3/4" x 1" x 1-1/4" x 1-1/2" x 1-3/4" x 2" x 2-1/4" x 2-1/2" x 2-3/4" x 3" /4-20 x 1/2" /4-20 x 3/4" /4-20 x 1" /4-20 x 1-1/4" /4-20 x 1-1/2" /4-20 x 1-3/4" /4-20 x 2" /4-20 x 2-1/4" /4-20 x 2-1/2" /4-20 x 2-3/4" /4-20 x 3" Phone: (877) Fax: (866) Visit us srfast.com 1-24
25 STAINLESS STEEL FASTENERS TAPPING SCREWS STAINLESS STEEL 18-8 PHILLIPS PAN HEAD PHILLIPS OVAL PHILLIPS PAN PROD.# BOX # 6 x 1/ # 6 x 3/4" # 6 x 1" # 6 x 1-1/4" # 8 x 1/2" # 8 x 3/4" # 8 x 1" # 8 x 1-1/4" # 8 x 1-1/2" #10 x 1/2" #10 x 3/4" #10 x 1" #10 x 1-1/4" #10 x 1-1/2" #10 x 1-3/4" #12 x 1/2" #12 x 3/4" #12 x 1" #12 x 1-1/4" #12 x 1-1/2" #14 x 1/2" #14 x 3/4" #14 x 1" #14 x 1-1/4" #14 x 1-1/2" PHILLIPS OVAL PROD.# BOX # 6 x 1/ # 6 x 3/4" # 6 x 1" # 6 x 1-1/4" # 8 x 1/2" # 8 x 3/4" # 8 x 1" # 8 x 1-1/4" # 8 x 1-1/2" #10 x 1/2" #10 x 3/4" #10 x 1" #10 x 1-1/4" #10 x 1-1/2" #10 x 1-3/4" #12 x 3/4" #12 x 1" #12 x 1-1/4" #12 x 1-1/2" Box /4-20 Tee Nut Stainless Box Qty /16" AN Washer ID: 11/64" OD: 9/16" Thickness: 1/16" Stainless Stainless Steel 3/8 AN Washer ID: 3/8 OD: 5/8 Thickness: 1/ #14 x 3/4" Phillip Truss Head Tapping Screw Stainless Hardened Stainless Steel Black Zinc Plated x 1 Phillips Pan Head Self Drilling Screw Hardened Stainless Steel x 1 Phillips Pan Head Self Drilling Screw x 1/2" Phillip Truss Head Machine Screw Stainless
01 FASTENERS JULY FASTENERS 1
01 FASTENERS 4 Bolts 22 Socket Screws 30 Nuts 39 Washers 53 Screws 72 Threaded Rods & Studs 73 Rivets, Rivnuts & Accessories 82 Retaining Rings 84 Pins, Links, & Sleeves 91 Key Stock & Assortments 90 Anchors
Fastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength
Fastener Basics Common Fastener Types Fastener Grade (US) or Class (metric) refers to the mechanical properties of the fastener material. Generally, a higher number indicates a stronger, more hardened
BLACK OXIDE & BLACK ZINC FASTENERS INCLUDING STEEL & STAINLESS INCH & METRIC
BLACK OXIDE & BLACK ZINC FASTENERS INCLUDING STEEL & STAINLESS INCH & METRIC Black Oxide MACHINE SCREWS (Stainless) 100º 82º MACHINE SCREWS & SEMS (Steel) Combination Pan 100 82º Phillips Fillister Phillips
METRIC FA S T E N E R S
METRIC FASTENERS CAP SCREWS & BOLTS DIN 603 Carriage Bolt, A2 SS DIN 603 Carriage Bolt, A4 SS DIN 931 Class 8.8 Hex Cap Screw, Steel Zinc DIN 931 Class 10.9 Hex Cap Screw, Plain Steel DIN 933 Class 8.8
Sales Aids Sec. 26 )HE. 2019
Sec. 26. 2019 Display Posters Wall 1EP Top Selling Body Shop Fasteners Displayed on a 28 x 40 English Wall Poster 1SP Top Selling Body Shop Fasteners Displayed on a 28 x 40 Spanish Wall Poster 2 Display
ASSORTMENTS BRONZECLASSWB Above assortment with one #99901 Cabinet, 17 extra dividers, all drawers pre-labeld inside and out.
ASSORTMENTS 34 s BRONZECLASS Body Shop Fastener Starter 71 of the most popular items - Over 1700 pieces. Fasteners Only - No Bins Box Qty. 1 Inside of drawer BRONZECLASSWB Above assortment with one #99901
Fastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength
Fastener Basics Common Fastener Types Fastener Grade (US) or Class (metric) refers to the mechanical properties of the fastener material. Generally, a higher number indicates a stronger, more hardened
Li cense Plate Screw Sec.1 Spec i fi ca tion Chart Sec. 5
Li cense Plate Screw Sec.1 Spec i fi ca tion Chart Sec. 5 Auveco Hex Washer/ Point Unit Page Part No. Size Length Size Head O.D. Type Type Fin ish Pkg. No. Ma chine Screw Thread 18779...M5-0.8...12mm...12.7mm..Phillips
K/D FITTINGS & FASTENERS
K/ FITTINGS & FASTENERS -1 Screws P. 162-168 -2 Connector Bolts P. 169-173 -3 K/ Fittings P. 174-177 -4 Insert Nuts P. 178-181 -5 Allen Keys P. 182-183 -6 Nails & Wall Plugs P. 184 -1 Screws 1010 Machine
3400 E. WALNUT STREET COLMAR, PA DORMAN / ROCKFORD
WEATHERLY #770 D-2013-A JUNE 2013 SUPERSEDES R-2009-F APR. 2009 2013 DORMAN / ROCKFORD 1-800-523-2492 Corporate Office & Customer Service www.dormanproducts.com 2013 Dorman Products, Inc. No reproduction
Rear Mount Installation Instructions
Rear Mount Installation Instructions Ford Transit Low Roof 130 WB Frame Kit Part #: DTC 0809-011 V1.0.10.12.18 IMPORTANT INSTALLATION STEPS ARE DENOTED USING A STOP SIGN. THESE STEPS MUST BE PERFORMED
Obsolete fastener specialist
Obsolete fastener specialist CLASSIC FASTENERS was established circa 1988 to supply 'obsolete' and just plain hard to get fasteners to restorers of automobiles and motorcycles via a mail order service.
Side DuraRac Installation Instructions
Side DuraRac Installation Instructions Ford Transit Low Roof 130 /148 WB Frame Kit Part #: CRC 22-1010-002 V1.0.08.10.18 IMPORTANT INSTALLATION STEPS ARE DENOTED USING A STOP SIGN. THESE STEPS MUST BE
3/4 Rear DuraRac Installation Instructions
3/4 Rear DuraRac Installation Instructions Ford Transit Low Roof 130 WB Frame Kit Part #: CRC 27-1010-001 V1.0.09.28.18 IMPORTANT INSTALLATION STEPS ARE DENOTED USING A STOP SIGN. THESE STEPS MUST BE PERFORMED
Flooring Nails 6-D Flooring Nails $3.40 / 1# 6-D Flooring Nails $14.50 / 5# 8-D Flooring Nails $3.40 / 1# 8-D Flooring Nails $14.
Nails Nails Drywall Screws Common Nails 4D Common Nails $3.85 / 1# 6D Common Nails $3.00 / 1# 6D Common Nails $74.25 / 50# 8D Common Nails $3.00 / 1# 8D Common Nails $74.25 / 50# 10D Common Nails $3.00
Obsolete fastener specialist
Obsolete fastener specialist CLASSIC FASTENERS was established circa 1988 to supply 'obsolete' and just plain hard to get fasteners to restorers of automobiles and motorcycles via a mail order service.
Side Katerack Installation Instructions
Side Katerack Installation Instructions Ram ProMaster City 2015+ Frame Kit Part #: CRC 28-1000-001 V1.0.12.06.18 IMPORTANT INSTALLATION STEPS ARE DENOTED USING A STOP SIGN. THESE STEPS MUST BE PERFORMED
Machine threads are usually functional with internal-threaded workpieces, such as nuts
2010 Screws Machine Threads. i macine thread Machine threads are usually functional with internal-threaded workpieces, such as nuts Wood Metal Sheet Threads. i A type thread AB type thread 17 type thread
Special Thumb Screw Order Form
Special Thumb Screw Order Form QUOTE FOR: ORDER FOR: Name: Company: Address: QUANTITY: Phone #: City: State: Zip: Email Address: FILL IN YOUR DIMENSIONS write directly over light blue type* write clearly
FNW can handle all your hanger and fastener needs, all in one place. FNW products are sold exclusively at Ferguson.
FASTENERS PIPE HANGERS, SUPPORTS & STRUT ACCESSORIES FNW can handle all your hanger and fastener needs, all in one place. FNW products are sold exclusively at Ferguson. Quick Reference Nuts Heavy Hex Nuts...4
SLOTTED SCREW THREAD FLAT or ROUND FILLISTER BINDING PAN TRUSS POINT # SIZE MIN. MAX. DIA. OVAL HEAD HEAD HEAD HEAD HEAD HEAD
Phillips SHEET METAL SCREWS WOOD SCREWS MACHINE SCREWS PHILLIPS FLAT, ROUND, OVAL FLAT, FLAT, OVAL ROUND, TRUSS, BRAZIER POINT # STOVE BINDING OVAL ROUND BINDING FILLISTER BUTTON 0 0, 1 0, 1 0, 1 0, 1
Table of Contents. GARD Specialists Co., Inc. GARD Specialists Co., Inc. P.O. Box 157 Eagle River, WI Fax
Table of Contents Heavy Duty Fasteners F-911 Fasteners Introduction... 2 F-911 Fasteners Specifications... 2 F-911 Fasteners Torque Chart... 3 Cap Screws - F-911 Alloy Hex Head, Coarse... 4-9 Assortments,
PPM-5710 JK HEAVY DUTY SKID PLATE ASSEMBLY Version 2.0
SYNERGY MFG. 870 INDUSTRIAL WAY, SAN LUIS OBISPO, CA (805) 242-0397 PPM-5710 JK HEAVY DUTY SKID PLATE ASSEMBLY Version 2.0 GENERAL NOTES: These instructions are also available on our website; www.synergymfg.com.
UNIVERSAL TOOLS. 572 Shop. Motion Pro T-Handle Socket Wrenches. Motion Pro Mini-Pro T-Handle Deep Socket Wrench
Motion Pro T-Handle Socket Wrenches Metric T-Handles feature a durable nickel pewter finish Deep 6-point sockets Lifetime replacement warranty DESCRIPTION TCI PART # RETAIL 8 mm Socket 722-8093 $ 17.95-J
Rear Katerack Installation Instructions
Rear Katerack Installation Instructions Ram Promaster City 2015+ Frame Kit Part #: CRC 26-1000-001 V1.0.12.04.18 IMPORTANT INSTALLATION STEPS ARE DENOTED USING A STOP SIGN. THESE STEPS MUST BE PERFORMED
AV Fastener (M) Sdn. Bhd Screw Eye Description 6.41 Square Hook(Shoulder Hook) Screw Description 6.38 One End Threaded Rod Screw Description
AV Fastener (M) Sdn. Bhd. 6.42 Screw Eye 6.42 Screw Eye 6.41 Square Hook(Shoulder Hook) Screw 6.41 Square Hook(Shoulder Hook) Screw 6.38 One End Threaded Rod Screw 6.38 One End Threaded Rod Screw 6.36
INSTALLATION INSTRUCTIONS SIDE BAR FORD ESCAPE & MAZDA TRIBUTE PART #
INSTALLATION INSTRUCTIONS SIDE BAR 2008-2010 FORD ESCAPE & MAZDA TRIBUTE PART # 50136 50137 PARTS LIST: 1 Driver/Left Sidebar 2 10-1.50mm x 35mm Bolt Plate 1 Passenger/Right Sidebar 2 10-1.50mm x 30mm
Parts Catalog. S-Series Slicer Manual Frozen Option S13. Model:
, 07 995 ECN 08 Parts Catalog S S-Series Slicer Manual Frozen Option Model: S 05/0/07 Rev. G IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT.
CIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD METAL SCREWS. 6 x 3/4 P/N x 1 METAL SCREW P/N x 3/4 METAL SCREW
A21-1 1160 CIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD S For light duty applications in solid materials Color coded diameters for easy identifi cation Acid resistant NYLON FLANGED:
FRAME BRACKET. Doing Our Best to Provide You the Best. Ford F250, F350 & F parts list. Page 1. 2/17 HJ32002,Rev 2.
2/17 HJ32002,Rev 2 BOlt torque specifications MEtRiC BOlts size Grade torque 8mm 8.8 23 ft/lbs. 10mm 8.8 45 ft/lbs. 12mm 8.8 78 ft/lbs. 14mm 8.8 125 ft/lbs. standard BOlts size Grade torque 5/16 5 18 ft/lbs.
Disclaimer. Socket Products Socket depth limits maximum torque. Torque figures are based on 80% of maximum torque for a given key size.
E546 V3 (1/17) Disclaimer Torque values listed in this book are based on mathematical calculations and experimental data. The values are valid only when the matched strength system listed is used. The
AUDAS. Tel: Fax: No.259 Baichi north Rd.Haiyan.Zhejiang.
Standard State SECTION A : SCREW THREAD Basic elements of screw thread design ANSI/ASME B1.7M Nomenclature.Definitions and letter symbols for screw thread ASME B1.1 Unified inch screw thread ( UN and UNF
Installation Instructions: Bumper (Part # SB76850) XJ Jeep Cherokee XRC Rear Bumper
NOTE: Carefully read entire instructions thoroughly before attempting to install this part. Parts Included Qty 93-7789 XJ XRC 1 93-7807 Bumper Mount Bracket: Drvr 1 93-7811 Bumper Mount Bracket: Pass 1
RBP-1215B-RX DODGE RAM QUAD CAB RX3
RBP-1215B-RX3 2002-2017 DODGE RAM 15-3500 QUAD CAB RX3 Passenger side RX-3 Side Step Drill Template Passenger side rear Modular Bracket (6) L Support Brackets Driver side rear Modular Bracket Driver side
INSTALLATION INSTRUCTIONS AND PARTS LIST MODEL , O-MEGA II 6 OVAL STEPS
INSTALLATION INSTRUCTIONS AND PARTS LIST MODEL 583036, 584036 O-MEGA II 6 OVAL STEPS 1. READ INSTRUCTIONS COMPLETELY AND CHECK TO MAKE SURE THAT ALL REQUIRED PARTS (LISTED ON THE SERVICE PARTS LIST) ARE
FRONT BUMPER INSTALLATION INSTRUCTIONS Toyota 4Runner
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 FRONT BUMPER INSTALLATION INSTRUCTIONS 2003-2009 Toyota 4Runner Please read before beginning Stainless steel hardware may bind
Horizontal Cable Systems
ALUMINUM RAILING INSTALLATION INSTRUCTIONS Horizontal Cable Systems 1) Check Contents Of Packages: Verify that all parts have arrived and that they match the packing list. 1A) Coastal applications: Confirm
Bolts Carriage Elevator Eye Hex Shoulder Specials Square Head Step. Drills, Taps, & Bits. Hex Capscrews Grade 8 Grade 5 Grade 2 A325 A490 Specials
AU-VE-CO Bolts Carriage Elevator Eye Hex Shoulder Specials Square Head Step Concrete Anchoring Adhesives Anchor Bolts Drop Ins Wedge Pins Cotter Dowel Hitch Spring Roll Taper Pipe Fittings Power Coil EZ
Installation Instructions
Important 1. Acclimate materials 24 hrs before installation. Maintain temperature controlled environment after installation 2. Install in accordance with manufacturer s installation instructions. Failure
Enclosed Partition Installation Instructions
Nissan NV1500/2500/3500 High Roof Partition Kit Part #: DTC 1502-036 V1.0.08.06.18 IMPORTANT INSTALLATION STEPS ARE DENOTED USING A STOP SIGN. THESE STEPS MUST BE PERFORMED IN THE SPECIFIED ORDER TO ENSURE
Kawasaki Teryx 2 Cab Kit* Caution: Before using this product, read this manual and follow all Safety Instructions. Owner s Manual
Owner s Manual Model: Kawasaki Teryx 2 Kawasaki Teryx 2 Cab Kit* Caution: efore using this product, read this manual and follow all Safety Instructions. Safety Instructions Cab Kit Contents Hardware ssembly
SERVICE PARTS MANUAL
SERVICE PARTS MANUAL SNO-WAY SPREADERS 4 CUBIC FOOT 6 CUBIC FOOT & 9 CUBIC FOOT 01 Sno-Way International 91019B TABLE OF CONTENTS Page PARTS LIST INTRODUCTION... HOPPER FRAME - 4 CUBIC FOOT (For Serial
SAFETY THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION AND USE RESTS WITH THE OWNER.
SAFETY Your safety and the safety of others is very important. In order to help you make informed decisions about safety, we have provided installation instructions and other information. These instructions
670 SCREWED FIX-IT KITS. Page WOOD SCREWS DOWEL PINS DOWELS STUDDING. Page Pages GROUP GROUP 651 EXTRACTOR GROUP 635 GROUP 650
Page...........556-559 635 WOOD SCREWS 650 DOWEL PINS 651 EXTRACTOR DOWELS 670 SCREWED STUDDING Page.......................560 Page.......................561 Page.......................561 Pages......................561
IN 578. Tools Required. Torque Specification: 10mm Socket 7/16 Socket 1/2 Socket 1/2 Wrench 7/16 Wrench 1/8 Allen Wrench.
Tools Required 2011-C Ford F250/F350 No Drilling into Vehicle is Required 10mm Socket 7/16 Socket 1/2 Socket 1/2 Wrench 7/16 Wrench 1/8 Allen Wrench FL277 x 1 Torque Specification: 1/4 Bolts - 6 Ft Lbs.
Size Grade Torque 9/ ft/lbs. 5/ ft/lbs. 3/ ft/lbs. 7/ ft/lbs ft/lbs.
8-3 HJ3205,Rev 4 BOlT TORQUE SPECIfICATIONS STANDARD BOlTS: Size Grade Torque 5/6 5 20 ft/lbs. 3/8 5 35 ft/lbs. 7/6 5 56 ft/lbs. /2 5 85 ft/lbs. Size Grade Torque 9/6 5 23 ft/lbs. 5/8 5 70 ft/lbs. 3/4
Katerack Wagon Shelving System
Ford Transit Connect Assembly Installation Instructions Sheet 1 of 14 BEFORE YOU START! IMPORTANT INSTALLATION STEPS ARE DENOTED USING A STOP SIGN. THESE STEPS MUST BE PERFORMED IN THE SPECIFIED ORDER
Bulkhead Model Number and
Bulkhead Model Number 96141-3-01 and 96142-3-01 Installing your ProMaster bulkhead is very clear cut following these instructions. Before cutting or drilling in the floor, verify the location of you gas
UP4 LEARN-A-LOT (PLAYFUL) Parts List DESCRIPTION 90 ANGLE BRACKET DOOR WINDOW MUSIC CATERPILLAR CIRCLE FRAME CIRCLE MIRROR YELLOW STAINED GLASS RED STAINED GLASS SQUARE TRIANGLE SPIRAL WHEEL SQUARE MIRROR
Fastener Type Chart. Fastener Categories. Sheet Metal Screws Fully threaded screws with a point for use in sheet metal. Abbreviated SMS.
Fastener Categories Wood Screws Machine Screws Thread Cutting Machine Screws Screws with a smooth shank and tapered point for use in wood. Abbreviated WS. Screws with threads for use with a nut or tapped
UP43 LEARN-A-L0T (NATURAL) Parts List DESCRIPTION 90 ANGLE BRACKET DOOR WINDOW MUSIC CATERPILLAR CIRCLE FRAME CIRCLE MIRROR YELLOW STAINED GLASS RED STAINED GLASS SQUARE TRIANGLE SPIRAL WHEEL SQUARE MIRROR
Hiniker Company th St. P.O. Box 3407 Mankato, MN VEHICLE INSTALLATION INSTRUCTIONS FOR: CHEV/GMC 4x4: K1500 SILVERADO/SIERRA
VEHICLE INSTALLATION INSTRUCTIONS FOR: CHEV/GMC x: 007 03 K500 SILVERADO/SIERRA Page of 5 Hiniker Company 58766 0th St. P.O. Box 307 Mankato, MN 5600 INSTRUCTION SHEET NO: 505 Rev. A August 0, 03 IMPORTANT:
Parts Catalog. S-Series Slicer Smart Manual SG13. Model:
, 07 99507 ECN 065 Parts Catalog S-Series Slicer Smart Manual Model: SG SG 0/0/07 Rev. G IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT. GLOBE
PRICE BOOK NO. 204S ORDERING INFORMATION
Container Quantities PRICE BOOK NO. 204S ORDERING INFORMATION Replacing Catalogue 789S Effective March, 2007 and Packaged items are supplied in full containers and we reserve the right to adjust order
TIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 TIRE RACK INSTALLATION INSTRUCTIONS 07-11 Dodge Sprinter Please read before beginning Stainless steel hardware may bind together
Chapter 7. Fasteners
Chapter 7 Fasteners LEARNING OBJECTIVES After studying this chapter, students will be able to: Identify several types of fasteners. Explain why inch-based fasteners are not interchangeable with metric-based
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS SPORTSMAN WINCH MOUNT GRILLE GUARD APPLICATION: 2016-2018 Toyota Tacoma PART NUMBER: 40-93885, 45-93880, 46-23885 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 1 WINCH TRAY 15MM SOCKET
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS SNYPER TUBULAR FENDERS APPLICATION: 2007-2017 Jeep Wrangler JK PART NUMBER: 62-1005, 62-1015 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1,2 2 FRONT FENDERS, DRIVER (1) AND PASSENGER
Fasteners. Bolts. NAPA FastTrack Counter Sales Training Fasteners Page 1. Figure 1. Typical Measurements for a Bolt or Hex Head Cap Screw
Fasteners Many types and sizes of fasteners are used in the automotive industry. Each fastener is designed for a specific purpose and condition. One of the most commonly used type of fastener is the threaded
frame bracket Dodge x 2 & 4 x 4 (6-1/2 & 8 Boxes Includes Mega Cab)
, Rev 4 02/19 frame bracket 8552026 Dodge 3500 4 x 2 & 4 x 4 (6-1/2 & 8 Boxes Includes Mega Cab) 14 5 7 2 4 11 9 10 17 3 6 1 8 13 15 16 18 12 ITEM PART # DESCRIPTION QTY. 1 00085.50 FLAT WASHER 10 2 00248
Assembly, Installation, Operation and Maintenance Instructions Kit, Base Rail Bracket Part # 31852
. Assembly, Installation, Operation and Maintenance Instructions Kit, Base Rail Bracket Part # 31852 Dealer / Installer: Provide a copy of these instructions to the end user of this product. These instructions
RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS
RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side.
IF YOU DON T SEE IT HERE
www.smithfast.com Drills & Taps & Bits Screws Cotter Drilling Bolts / Hex Capscrews Lag Carraige Hitch Grade 8 Machine Grade Elevator 5 Sheet Spring Metal Roll Grade Eye 2 Square Taper Head set A325 Hex
STONE EXTREME /29/2013 PART NUMBER
STONE EXTREME 700 PART NUMBER 005 STONEKOR LLC -800-6-059 customerservice@stonekor.com www.stonekor.com 9 0 6 0 6 5 0 8 6 5 7 STONE EXTREME 700 5 5 7 7 6 0 MACHINE: 005 5 5 8 7 8 9 0 9 STONEKOR LLC -800-6-059
INSTALLATION GUIDE. C20-FTL STRAIGHT PARTITION Transit Partition ( Perforated Window, No Access, Steel )
INSTALLATION GUIDE C20-FTL STRAIGHT PARTITION Transit Partition ( Perforated Window, No Access, Steel ) QUICK START GUIDE Phase 1 - Assembly q 1.1 Setup... q 1.2 Partition Assembly... 3-5 5-6 Phase 2 -
INSTALLATION GUIDE KPC SNBO-C31
INSTALLATION GUIDE KPC SNBO-C31 Bolt-On Frame Step Notch 1963-1972 Chevrolet and GMC C10 Pickup Description: Bolt-on, frame step notch for 1963-1972 Chevrolet and GMC C10 pickup to provide additional suspension
INSTALLATION INSTRUCTIONS KK-K9-F14-K K9 KIT FOR FORD EXPEDITION
INSTALLATION INSTRUCTIONS KK-K9-F14-K-32 32 K9 KIT FOR 2003-2016 FORD EXPEDITION TOOLS REQUIRED: Power Drill Drill Bit Set Standard & Metric Socket Sets Phillips Screw Driver Open End Wrench Set Wire Cutters
INSTALLATION INSTRUCTIONS RH 412 STEEL DOORS
By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side. Note: Having the hood open makes the job
INSTALLATION INSTRUCTIONS GRILLE GUARD FORD ESCAPE
INSTALLATION INSTRUCTIONS GRILLE GUARD 08-010 FORD ESCAPE PARTS LIST: 1 Grille Guard 4 10-1.50mm x 30mm Hex Bolts 1 Driver/Left Frame Mounting 4 10mm Lock Washers 1 Passenger/Right Frame Mounting 6 10mm
40670 Transit Connect/NV200/City Express/ProMaster City Partition
40670 Transit Connect/NV200/City Express/ProMaster City Partition Top Panel (1) Bottom Panel (1) Transit Connect (2014) Top Angle (1) TC Top MNT BRKT (2) TC Bottom MNT PLT (2) NV200/City Express Top Mount
TUFTHRED - FRACTIONAL & METRIC SIZES
3 East Julie Street 800-3-119 (Voice) 90-733-741 (Fax) TUFTHRED - FRACTIONAL & METRIC SIZES No tapping is required; just drill out the damaged threads using fractional or wire gauge drill bits. Then screw
ABS FASTENERS OFFERS A COMPLETE LINE OF COMMERCIAL STANDARDS AND SPECIALS.
ABS FASTENERS OFFERS A COMPLETE LINE OF COMMERCIAL STANDARDS AND SPECIALS. We are your premier source for commercial grade fasteners, nuts, bolts, screws, and hardware. For more than 60 years, ABS has
ANCHORS SLEEVE ANCHORS BOLT DIAMETER
SLEEVE ANCHORS No hole spotting. No mis-alignments. Simply drill through the fixture into concrete, insert and tighten. Preassembled for fast, easy installation. No special tools necessary; meets federal
ANCHORHD- Heavy Duty Anchors RW List Prices Page L - 1. Vertigo (Sammy) Rod hangars. Cap Screws. Drop-In Anchors. Coach Screws.
ANCHORHD- Heavy Duty Anchors RW List Prices Page L - 1 Cap s Vertigo (Sammy) Rod hangars 03512000 1/4 20pk Zinc Plated Cap 3.18 03501210 3/8 15pk Zinc Plated Cap 4.78 03501220 1/2 10pk Zinc Plated Cap
Installation Instructions
Please read all instructions before installing Installation Instructions Important 1. Acclimate materials 24 hrs before installation. Maintain temperature controlled environment after installation 2. Install
TEL:1-866-XANATOS INSTALLATION INSTRUCTIONS GRILL GUARD FOR FORD EXPLORER PART # 17FJ26MA
\ TEL:1-866-XANATOS INSTALLATION INSTRUCTIONS GRILL GUARD FOR FORD EXPLORER 02-05 PART # 17FJ26MA NOTE: Please read this information before assembling. Complete step by step instruction sheets will be
UP139 CRUISE-A-LONG (STANDARD) NATURAL COATED DECK COATED RAMP DESCRIPTION SQUIRREL PANEL BACK WALL CLEAR BUBBLE CRUISE RAIL SQUARE SPIRAL WHEEL 90 AN
UP39 CRUISE-A-LONG (STANDARD) NATURAL COATED DECK COATED RAMP DESCRIPTION SQUIRREL PANEL BACK WALL CLEAR BUBBLE CRUISE RAIL SQUARE SPIRAL WHEEL 90 ANGLE BRACKET TUBE BRACKET TUBE WARNING LABEL PLATE HARDWARE
DuraRac Shelving System
GM Full Size Van Assembly Installation Instructions Sheet 1 of 13 BEFORE YOU START! IMPORTANT INSTALLATION STEPS ARE DENOTED USING A STOP SIGN. THESE STEPS MUST BE PERFORMED IN THE SPECIFIED ORDER TO ENSURE
AndyMark DART 12.
AndyMark DART 12 Part Number Description QTY These Parts Are Pre-Assembled by AndyMark am-0031 Bearing, 3/16"ID (R3) 1 am-0209 Bearing, 3/8"ID 1614ZZ 2 am-1028 Screw, #10-32x3/8 Pan Head Philips 8 am-1121
Installation Instructions 1200/1255/G Handrails International Compliant
Important 1. Acclimate materials 24 hrs before installation. Maintain temperature controlled environment after installation 2. Install in accordance with manufacturer s installation instructions. Failure
Installation Instructions Kit, Base Rail Bracket Part # 31413
Installation Instructions Kit, Base Rail Bracket Part # 31413 Dealer / Installer: Provide a copy of these Instructions to the end user of this product. These Instructions provide important operating and
INSTALLATION INSTRUCTIONS PART#:17GT23MSS\17GT23MA MODULAR GRILL GUARD FOR CHEVY SILVERADO 1/2 TON 99-02
INSTALLATION INSTRUCTIONS PART#:17GT23MSS\17GT23MA MODULAR GRILL GUARD FOR CHEVY SILVERADO 1/2 TON 99-02 1 guard, center section 1 brush guard, left side 1 brush guard, right side 1 wire guard insert,
Leveling Feet, Base Plates and Casters
Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.
Yellow Zinc. Aluminum. Commonly used for decorative applications, Furniture & hobby projects
Product Category Materials & Plating Finish Plain Minimal Rust Resistance Stainless Steel Machine Screws & Hex Bolts None Brass Classes: 18.0 Stainless steel contains 18% chromium, 0% nickel, least amount
ASSEMBLY & INSTALLATION INSTRUCTIONS
ASSEMBLY & INSTALLATION INSTRUCTIONS VEHICLE MOUNT KIT 118 AND VEHICLE CENTER MEMBER 6050 TO FIT 2008 & LATER FORD F250-F550 4X4 Sno-Way, Down Pressure and EIS are registered trademarks of Sno-Way International,
Handout Activity: HA043
Handout Activity: HA043 Student/Intern information: Name Date Class Summary There are many different fasteners used in automotive applications, including screws, bolts, studs & nuts. Washers & chemical
INSTALLATION INSTRUCTIONS, AND PARTS LIST
INSTALLATION INSTRUCTIONS, AND PARTS LIST LB20 SERIES RAMPS Link Mfg. Ltd. 223 15th St. N.E. Sioux Center, IA USA 51250-2120 (712) 722-4868 Fax (712) 722-4779 QUESTIONS? CALL CUSTOMER SERVICE 1-800-248-3057
YOUR SPECIALIST SUPPLIER OF STUDBOLTS AND FASTENERS THE COMPLETE ENGINEERING SOLUTION
YOUR SPECIALIST SUPPLIER OF STUDBOLTS AND FASTENERS THE COMPLETE ENGINEERING SOLUTION Introduction Bon Accord Engineering, formed in 2015 by Jill, Phil, and Stefan Leiper, aims to provide the industry
Handles Fixed and folding, with a large selection of profiles, positions, types, threads, materials and finishes.
Handles Fixed and folding, with a large selection of profiles, positions, types, threads, materials and finishes. Standoffs Round, hex, square, female, swage, male-female, hinged, anti-rotation and metric.
INSTALLATION INSTRUCTIONS AND PARTS LIST MODEL , , O-MEGA STEPS
INSTALLATION INSTRUCTIONS AND PARTS LIST MODEL 585054, 585060, 586054 O-MEGA STEPS 1. READ INSTRUCTIONS COMPLETELY AND CHECK TO MAKE SURE THAT ALL REQUIRED PARTS (LISTED ON THE SERVICE PARTS LIST) ARE
UP133 CRAWL & TODDLE (STANDARD) NATURAL COATED DECK COATED RAMP FRONT WALL BACK WALL DESCRIPTION COATED STEPS 90 ANGLE BRACKET LEFT WALL RIGHT WALL CL
UP33 CRAWL & TODDLE (STANDARD) NATURAL COATED DECK COATED RAMP FRONT WALL BACK WALL DESCRIPTION COATED STEPS 90 ANGLE BRACKET LEFT WALL RIGHT WALL CLEAR BUBBLE CRUISE RAIL SQUARE SPIRAL WHEEL TRIANGLE
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS R5 STEP BOARD APPLICATION: 2009-2017 Dodge Ram 1500 Quad / Crew Cab 2010-2017 Dodge Ram 2500/3500 Crew Cab PART NUMBER: 28-51040, 28-51045, 28-51050, 28-51055 ITEM QUANTITY DESCRIPTION
At Ridgeline Fasteners Ltd.
About Ridgeline Fasteners Ltd. At Ridgeline Fasteners Ltd. we have over twelve years experience importing, distributing, stocking and supplying fasteners to the manufacturing industry. We know how to meet
4832A Installation Sheet Part List
4832A Installation Sheet Part List (1) 4016A-43-003 Qty 1- (2) 4016A-43-002 Qty 1- (3) 4016A-43-001 Qty 2- (4) 4016A-10-005 Qty 1- (5) 4016A-43-004L Qty 1- Mounting Bolt Kit (A) (K) Qty 2 - Qty 6 - M10
INSTALLATION GUIDE N5-DS48-4
INSTALLATION GUIDE N5-DS48-4 Shelving ( steel ) Transit High Roof & Medium Roof Promaster Standard Roof & High Roof Nissan NV High Roof Sprinter Low Roof & High Roof Box Truck / Trailer QUICK START GUIDE
FITTINGS, SCREWS, BOLTS, ETC.
5mm Connecting 3 Mending Plate Order number... 19-116 For 5/8 to 5/8...19-168 For 3/4 to 3/4...19-170 Packaged 5 pieces Finish: Bright Nickel Packaged 5 pieces Finish: Zinc Plated Connecting Bracket For
BX2173 Installation Instructions Ford Focus (including the 2.3L engine) 2003 Ford Focus SVT
BX2173 Installation Instructions 2000-04 Ford Focus (including the 2.3L engine) 2003 Ford Focus SVT Serial No. The front fascia, coolant line bracket and anti-pollution devices are removed for baseplate
Installation Instructions 2000/2000W/G Handrail
Important 1. Acclimate materials 24 hrs before installation. Maintain temperature controlled environment after installation 2. Install in accordance with manufacturer s installation instructions. Failure
Concealed Headlights Restoring Concealed Corvette Headlights
Concealed Headlights Restoring 1968-1972 Concealed Corvette Headlights Hidden headlights and their mechanisms need attention every now and then. The following is a booklet to restore 1968-72 headlights.
Serviceable Parts List RAIL MOUNT REV #WFS_01/16
Serviceable Parts List RAIL MOUNT REV #WFS_01/16 Table of Contents Using This Document...3 Introduction...3 Parts Ordering...3 Safety Notice...3 Total Assemblies and Installation Kits...4 Parts Lists...4