Li cense Plate Screw Sec.1 Spec i fi ca tion Chart Sec. 5
|
|
|
- Charla Garrison
- 5 years ago
- Views:
Transcription
1 Li cense Plate Screw Sec.1 Spec i fi ca tion Chart Sec. 5 Auveco Hex Washer/ Point Unit Page Part No. Size Length Size Head O.D. Type Type Fin ish Pkg. No. Ma chine Screw Thread M mm mm..Phillips Pan...B... & Yel low (15/32") (1/2") Dichromate M mm...10mm...14mm...Hex Flange Head...B... & Clear (15/32") (9/16") M mm 10mm 14mm Hex Flange Head B & Clear M mm...14mm...Slot ted Round...B M mm...14mm...Slot ted Round...B M mm...14mm...Phillips Round...BT...Black M mm...12mm...Slot ted Pan Head...B...Black...50 Sets...37 (5/8") (15/32") Ny lon M mm...12mm...Slot ted Pan Head...B...Black...50 Sets...37 (25/32") (15/32") Ny lon M mm...12mm...Phillps Pan Head...B...Black...50 Sets...37 (25/32") (15/32") Ny lon M mm...12mm...Slot ted Pan Head...B...Nat u ral...25 Sets...37 (25/32") (15/32") Ny lon M mm...12mm...Phillips Pan Head...B (25/32") (15/32") M mm...10mm...13mm...Slot ted Hex...CA (25/32") (1/2") M mm...12mm...Slot ted Pan Head...B...Nat u ral...25 Sets...38 (1") (15/32") Ny lon M mm...12mm...Slot ted Pan Head...B...Black...25 Sets...38 (1") (15/32") Ny lon M mm...16mm...Slot ted Pan Head...B...Nat u ral...25 Sets...38 (25/32") (5/8") Ny lon /4" /2"...9/16"...Slot ted Round Head...B /4" /2"...1/2"...Slot ted Round...B /4" /2"...9/16"...Slot ted Truss Head...B Sets /4" /2"...9/16"...Slot ted Truss Head...B Sets /4" /2"...1/2"...Slot ted Round...B Sets /4" /2"...1/2"...Slot ted Round...B Sets /4" /2"...1/2"...Slot ted Round...B...50 Sets...36 With Wing Nut /4" /8"...1/2"...Slot ted Pan Head...F...50 Sets...37 With Ny lon Nut (Con tin ued on Next Page) Copy right 2013, Au-ve-co Prod ucts Co. "SINCE 1916" THE COM PLETE FAS TENER LINE 33
2 Sec. 5 Specification Chart Auveco Hex Washer/ Point Unit Page Part No. Size Length Size Head O.D. Type Type Fin ish Pkg. No. Ma chine Screw Thread (Con tin ued) /4" /8"...19/32"...Slot ted Truss...B...Nat u ral...25 Sets...37 With Washer Nut Ny lon /4" /8"...19/32"...Slot ted Truss...B...Black...25 Sets...37 With Washer Nut Ny lon /4" /4"...9/16"...Slot ted Truss Head...B /4" /4"...9/16"...Slot ted Round...B Sets...37 Tap ping Screw Thread M mm...10mm...Phillips Wa fer Head...AB... & (#10) (5/8") (3/8") Yel low #10...5/8"...1/2"...Slot ted Truss...AB #10...3/4"...15/32"...Phillips Flat...AB M mm...13mm...Phillips Truss Head...AB... & Yel low (1/4"-14) (19/32") (1/2") Dichromate M mm...10mm...13mm...Phillips Hex...AB... & Yel low (1/4"-14) (5/8") (1/2") Dichromate M mm...10mm...12mm...Phillips Hex...AB... & Yel low (1/4"-14) (25/32") (15/32") Dichromate M mm...14mm...Duo-Drive Truss Head...B...Dacromet (#14) M mm...14mm...Duo-Drive Truss Head...AB...Dacromet (#14) (25/32") (9/16") #14...1/2"...Thumb Screw...AB... Die Cast #14...5/8"...9/16"...Slot ted Truss Head...Dog Pt /4"...5/8"...9/16"...Slot ted Round...B /4"...5/8"...9/16"...Slot ted Round...B...25 Sets...36 With Ny lon Nut #14 (1/4")..5/8"...5/16"...5/8"...Slot ted Hex...B #14 (1/4")..5/8"...5/16"...5/8"...Slot ted Hex...B #14 (1/4")..5/8"...5/16"...5/8"...Slot ted Hex...AB #14...3/4"...15/32"...Phillips Pan Head...A...Stain less Steel #14...3/4"...9/16"...Slot ted Truss Head...AB #14...3/4"...9/16"...Slot ted Truss Head...AB #14...3/4"...3/8"...1/2"...Slot ted Hex...AB #14...3/4"...3/8"...1/2"...Slot ted Hex...AB...25 Sets...37 With Ny lon Nut #14...3/4"...3/8"...1/2"...Slot ted Hex...AB # /16"...9/16"...Slot ted Truss Head...B THE COM PLETE FAS TENER LINE "SINCE 1916" Copy right 2013, Au-ve-co Prod ucts Co.
3 18156 ( ) & Yellow M x 16mm (#10 x 5/8") Phillips Wafer Head 10mm (3/8") Head O.D. BMW 5278 ( ) #10 x 5/8" Slotted Truss Use With Auveco Nut #10 x 3/4" Phillips Flat 15/32" Washer Hd. O.D & Yellow Dichromate M5-0.8 x 12mm Phillips Pan 12.7mm (1/2") Washer Hd. O.D. Contour & Mercury Mystique 1995-On & Clear M6-1.0 x 12mm Hex Flange 14mm (9/16") Flange O.D. Class 10.9 Acura LI CENSE PLATE Sec.1 FAS TEN ERS Sec Slotted Round Head 5909 Slotted Round Wshr Head & Yellow Dichromate M x 15mm (1/4"-14 x 19/32") Phillips Truss Head 13mm (1/2") Head Dia #14 x 5/8" With Dog Point 9/16" Head O.D /4" x 5/8" Slotted Round Wshr Head 9/16" O.D. Use With Auveco Nut (N S2) #14 (1/4") x 5/8" 5/8" O.D. 5/16" Hex (N800369) #14 (1/4") x 5/8" 5/8" O.D. 5/16" Hex #14 (1/4") x 5/8" 5/8" O.D. 5/16" Hex & Yellow Dichromate M x 16mm (1/4"-14 x 5/8") Phillips Hex 13mm (1/2") O.D & Clear Hex Flange 14mm (9/16") Flange O.D. Class 10.9 Acura Slotted Round 14mm (9/16") O.D Slotted Round Wshr Hd 14mm (9/16") O.D Black Phillips Round Washer Head Thread Cutting O.D.: 14mm (9/16") Hyundai Dacromet 320 M x 16mm (#14 x 5/8 ) Duo-Drive Truss Head 14mm Head Diameter Stainless Steel Phillips Pan Head 15/32" Head O.D. Copy right 2013, Au-ve-co Prod ucts Co. "SINCE 1916" THE COM PLETE FAS TENER LINE 35
4 Sec. 5 LI CENSE PLATE FAS TEN ERS /4"-20 x 3/4" UNIT PACK AGE: Phillips Pan Head (Toyota: ; Honda: SM4-999AH) & Yellow Dichromate M x 20mm (1/4"-14 x 3/4") Phillips Hex 12mm (1/2") Wshr Hd. O.D. Honda 1990-On GEO Prizm, Toyota /8" Hex /8" Hex ( ) #14 x 1-3/16 9/16 Head Diameter S & T Trucks On #14 x 1/2" Dealer License Plate Thumb Screw 1-1/8" Overall Length UNIT PACKAGE: /16" Sets 3182 Slotted Round 7/16" Sets 3183 Slotted Round Washer Hd 7/16" ATF Sets 5885 Slotted Round With Flat Washer And Wing Nut 5/8" Washer O.D. Sets (Chry: ; AMC: ) 13mm (1/2") Wshr Hd. O.D., Honda & AMC ( ) Dacromet 320 M x 20mm () Duo-Drive Truss Head 14mm Head Diameter On /16" ATF Sets /4" x 5/8" Slotted Round Wshr Head And Nut (Auveco No & 8242) 9/16" O.D. 36 THE COM PLETE FAS TENER LINE "SINCE 1916" Copy right 2013, Au-ve-co Prod ucts Co.
5 LI CENSE PLATE Sec.1 FAS TEN ERS Sec ( S) 1/4"-20 x 5/8" Type F Thread Cutting And Nut (Auveco No & 3682) 1/2" Head Diameter UNIT PACK AGE: 50 Sets /4"-20 x 3/4" 7/16" ATF Sets And Nut (Auveco # & 11369) 3/8" Hex Nat u ral Ny lon 1/4"-20 x 5/8" Slotted Truss 19/32" O.D. 9/16" Washer Nut O.D. 7/16" Screw Only From Screw Only From Nut Only From Nut Only From Black 1/4"-20 x 5/8" Slotted Truss 19/32" O.D. 9/16" Washer Nut O.D. 7/16" Screw Only From Screw Only From Nut Only From Nut Only From Black Sets Screw Only From Screw Only From Nut Only From Black Sets Screw Only From Screw Only From Nut Only From Natural Screw Only From Screw Only From Nut Only From Black Phillips Pan Head Sets Screw Only From Screw Only From Nut Only From Copy right 2013, Au-ve-co Prod ucts Co. "SINCE 1916" THE COM PLETE FAS TENER LINE 37
6 Sec. 5 LI CENSE PLATE FAS TEN ERS Natural M6-1.0 x 25mm Screw Only From Black M6-1.0 x 25mm Screw Only From Natural M x 20mm 16mm (5/8") Head Dia. 8mm (5/16") Screw Only From Nut Only From Bagged Hardware 2 Pieces Each of 9603 ( Slotted Truss Head Screw) And ( Nut) Packaged In Unmarked, See-Thru Plastic Bags. Sets Bagged Hardware 4 Pieces Each of 9603 ( Slotted Truss Head Screw) And ( Nut) Packaged In Unmarked, See-Thru Plastic Bags. Sets Same As Except For Unit Package Quantity Sets Screw, Spacer & Washer Brass Nut License Plate Screw & Hardware 12.5mm (1/2") Washer O.D. 19mm (3/4") Spacer O.D. Toyota Ny lon License Plate Bracket Spacer 1/4" (6mm) I.D. 3/4" (19mm) O.D. 1/4" (6mm) Thick Toyota 2625 #8 Screw Size & Headlight Door Mounting Screw Nut 5228 ( ) #10 Screw Size Use With Auveco Screw ( ) Black #12 Screw Size UNIT PACKAGE: ( ) 1/4"-20 Screw Size Use With Auveco Screw THE COM PLETE FAS TENER LINE "SINCE 1916" Copy right 2013, Au-ve-co Prod ucts Co.
7 LI CENSE PLATE Sec.1 FAS TEN ERS (IL LUS TRA TION AC TUAL SIZE) Sec ( ) 8242 ( ) Use With Auveco Screw ( ) Black License Plate Screw Grommet M6.3 (#14) Screw Size Head Size: 20mm x 20mm Stem Length: 14mm Buick Skylark, Chevrolet Malibu, Oldsmobile Achieva, Cutlass & Intrigue On ( ) (N S100) Black License Plate & Rear Bumper Nut With Sealer M6.3 (#14) Screw Size Head Size: 16mm x 16mm Stem Length: 8mm Fusion & Mustang On UNIT PACKAGE: ( S) #14 Screw Size 8418 (380370) #14 Screw Size Use With Auveco Screw #14 Screw Size Use With Auveco Screws 8249 or ( ) Natural UNIT PACKAGE: ( ) Organic Front Fender Extension & License Plate Bracket Retainer Nut M6-1.0 Screw Size Express & Savanna 1996-On UNIT PACKAGE: ( ) White License Plate Screw Grommet #14 (M6.3) Screw Size Head Size: 17mm x 33mm Stem Length: 9mm On UNIT PACKAGE: 15 When The World Thinks Of Body Hardware & Specialty Fasteners Only One Name Comes To Mind Copy right 2013, Au-ve-co Prod ucts Co. "SINCE 1916" THE COM PLETE FAS TENER LINE 39
TAPPING SCREWS 1-1 TAPPING SCREWS PHILLIPS OVAL. 1 General Fasteners HEAD ZINC BLACK SIZE SIZE CHROME CHROMATE OXIDE
TAPPING SCREWS TAPPING SCREWS PHILLIPS OVAL HEAD ZINC BLACK SIZE SIZE CHROME CHROMATE OXIDE #4 x 3/8"... REG... 110001 #4 x 1/2"... REG... 105030... 110002 #4 x 5/8"... REG... 1 10003 #4 x 3/4"... REG...
F l a t S c r e e n A R M S I n s t a l l a t i o n
ITEM NUMBERS (1) #TOACAORG16 (2) #TOACAORG20 (3) #TOACATRP24 (4) #TOACATRP30 (5) #TOACATRPDS (6) #TOACATRPSS TOOLS REQUIRED (1) 3/8 Wrench (not provided) (2) Phillips head screwdriver (not provided) (1)
01 FASTENERS JULY FASTENERS 1
01 FASTENERS 4 Bolts 22 Socket Screws 30 Nuts 39 Washers 53 Screws 72 Threaded Rods & Studs 73 Rivets, Rivnuts & Accessories 82 Retaining Rings 84 Pins, Links, & Sleeves 91 Key Stock & Assortments 90 Anchors
PARTS LIST GALAXY DS FLOOR MACHINE
PARTS LIST GALAXY DS FLOOR MACHINE HANDLE TUBE ASSEMBLY ITEM PART NO. DESCRIPTION QTY 101 0393051 SAFETY DECAL 1 102 0393691 IDENTIFIER DECAL GALAXY 1 103 0393351 SWITCH BOX COVER 1 104 0393531 DECAL 1
FRONT BUMPER INSTALLATION INSTRUCTIONS Toyota 4Runner
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 FRONT BUMPER INSTALLATION INSTRUCTIONS 2003-2009 Toyota 4Runner Please read before beginning Stainless steel hardware may bind
ASSORTMENTS BRONZECLASSWB Above assortment with one #99901 Cabinet, 17 extra dividers, all drawers pre-labeld inside and out.
ASSORTMENTS 34 s BRONZECLASS Body Shop Fastener Starter 71 of the most popular items - Over 1700 pieces. Fasteners Only - No Bins Box Qty. 1 Inside of drawer BRONZECLASSWB Above assortment with one #99901
Sales Aids Sec. 26 )HE. 2019
Sec. 26. 2019 Display Posters Wall 1EP Top Selling Body Shop Fasteners Displayed on a 28 x 40 English Wall Poster 1SP Top Selling Body Shop Fasteners Displayed on a 28 x 40 Spanish Wall Poster 2 Display
TIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 TIRE RACK INSTALLATION INSTRUCTIONS 07-11 Dodge Sprinter Please read before beginning Stainless steel hardware may bind together
PARTS LIST GALAXY DS FLOOR MACHINE
PARTS LIST GALAXY DS FLOOR MACHINE ITEM PART NO. DESCRIPTION QTY 101 0393051 SAFETY DECAL 1 102 0393691 IDENTIFIER DECAL - GALAXY 1 103 0393351 SWITCH BOX COVER 1 104 0393531 DECAL 1 105 0393441 HANDLE
40670 Transit Connect/NV200/City Express/ProMaster City Partition
40670 Transit Connect/NV200/City Express/ProMaster City Partition Top Panel (1) Bottom Panel (1) Transit Connect (2014) Top Angle (1) TC Top MNT BRKT (2) TC Bottom MNT PLT (2) NV200/City Express Top Mount
Flooring Nails 6-D Flooring Nails $3.40 / 1# 6-D Flooring Nails $14.50 / 5# 8-D Flooring Nails $3.40 / 1# 8-D Flooring Nails $14.
Nails Nails Drywall Screws Common Nails 4D Common Nails $3.85 / 1# 6D Common Nails $3.00 / 1# 6D Common Nails $74.25 / 50# 8D Common Nails $3.00 / 1# 8D Common Nails $74.25 / 50# 10D Common Nails $3.00
March 2000 INSTALLATION INSTRUCTIONS. Rev. 1 MODEL NO
March 2000 INSTALLATION INSTRUCTIONS Rev. 1 MODEL NO. 58710 APPLICATION: Instruction No. AMERICAN MOTORS 1979-80 Pacer Psgr. & S/W 1 BUICK 1982-84 Century Psgr. 1 1984-87 Century S/W 1 1987-91 Skylark
Kawasaki Teryx 2 Cab Kit* Caution: Before using this product, read this manual and follow all Safety Instructions. Owner s Manual
Owner s Manual Model: Kawasaki Teryx 2 Kawasaki Teryx 2 Cab Kit* Caution: efore using this product, read this manual and follow all Safety Instructions. Safety Instructions Cab Kit Contents Hardware ssembly
GlideRite Retractable Cover System For Hot Spot Spas (SE & SLX only)
List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.
Horizontal Cable Systems
ALUMINUM RAILING INSTALLATION INSTRUCTIONS Horizontal Cable Systems 1) Check Contents Of Packages: Verify that all parts have arrived and that they match the packing list. 1A) Coastal applications: Confirm
ASSEMBLY & INSTALLATION INSTRUCTIONS
ASSEMBLY & INSTALLATION INSTRUCTIONS VEHICLE MOUNT KIT 118 AND VEHICLE CENTER MEMBER 6050 TO FIT 2008 & LATER FORD F250-F550 4X4 Sno-Way, Down Pressure and EIS are registered trademarks of Sno-Way International,
GlideRite Retractable Cover System For HotSpring & Tiger River Spas (except Classic & pre-2000 Landmark Spas)
List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.
Instructions and Parts List DR-12N Martin House
Form 36-99 Instructions and Parts List DR-N Martin House Note: It is necessary to install a post before house is put up, but the house can be assembled at any time. House parts Check parts against this
Assembly & Installation Instructions FOR VEHICLE MOUNT KIT USING VEHICLE CENTER MEMBER
Assembly & Installation Instructions FOR VEHICLE MOUNT KIT 991002 USING VEHICLE CENTER MEMBER 9910092 TO FIT 99 - LATER Chevrolet 2500 Silverado 4x4 and 3500 Pickup 4x4 99 - LATER GM 2500 Sierra 4x4 and
BMW R1100/R1150GS Instructions for Mounting Medium or Large Pack Rack and Micatech Top Case with Mount Kit
BMW R1100/R1150GS Instructions for Mounting Medium or Large Pack Rack and Micatech Top Case with Mount Kit Thank you for purchasing the Micatech Pack Rack and Top Case, with R1100/1150GS mount kit. Please
INSTALLATION INSTRUCTIONS SIDE BAR FORD ESCAPE & MAZDA TRIBUTE PART #
INSTALLATION INSTRUCTIONS SIDE BAR 2008-2010 FORD ESCAPE & MAZDA TRIBUTE PART # 50136 50137 PARTS LIST: 1 Driver/Left Sidebar 2 10-1.50mm x 35mm Bolt Plate 1 Passenger/Right Sidebar 2 10-1.50mm x 30mm
METRIC FA S T E N E R S
METRIC FASTENERS CAP SCREWS & BOLTS DIN 603 Carriage Bolt, A2 SS DIN 603 Carriage Bolt, A4 SS DIN 931 Class 8.8 Hex Cap Screw, Steel Zinc DIN 931 Class 10.9 Hex Cap Screw, Plain Steel DIN 933 Class 8.8
PARTS LIST GALAXY FLOOR MACHINE
PARTS LIST GALAXY FLOOR MACHINE ITEM PART NO. DESCRIPTION QTY 101 0393051 SAFETY DECAL 1 102 0393691 IDENTIFIER DECAL - GALAXY 1 103 0393351 SWITCH BOX COVER 1 104 0393531 DECAL 1 105 0393441 HANDLE GRIP
Toyota 4 Runner and Lexus GX Skid Plate installation instructions.
Toyota 4 Runner and Lexus GX Skid Plate installation instructions. NOTE: When installing the full set of skid plate start at the rear of the vehicle and work your way forward. NOTE: Torque Specs: Tighten
Hiniker Company th St. P.O. Box 3407 Mankato, MN VEHICLE INSTALLATION INSTRUCTIONS FOR: CHEV/GMC 4x4: K1500 SILVERADO/SIERRA
VEHICLE INSTALLATION INSTRUCTIONS FOR: CHEV/GMC x: 007 03 K500 SILVERADO/SIERRA Page of 5 Hiniker Company 58766 0th St. P.O. Box 307 Mankato, MN 5600 INSTRUCTION SHEET NO: 505 Rev. A August 0, 03 IMPORTANT:
INSTALLATION INSTRUCTIONS
TEL1-866-XANATOS INSTALLATION INSTRUCTIONS PART#: BB080800\BB080800A 2 CITY BAR FOR JEEP PATRIOT 4X4 & 4X2 08-09 PARTS LIST: 1 City Bar 2 12-1.75mm x 50mm Hex Head Bolts 1 Center Tube Bracket 4 12-1.75mm
Fastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength
Fastener Basics Common Fastener Types Fastener Grade (US) or Class (metric) refers to the mechanical properties of the fastener material. Generally, a higher number indicates a stronger, more hardened
The Derby Magic Company Track Assembly Instructions, revision D page 1 of 10
The Derby Magic Company Track Assembly Instructions, revision D page 1 of 10 Thank you for purchasing a Derby Magic Pinewood Derby Track. To assemble your track, start with the stand. The parts of the
Section J DISTRIBUTOR
Section J DISTRIBUTOR 1J 1. 47-094344-003 Front Pulley Shaft 2. 47-091905-003 Turn Plate (right-hand) 3. 11-051038-001 Hex Hd. Cap Screw (8 mm x 16 mm) 4. N.A. Distributor Frame Complete 5. 47-090547-004
Installation Guide 40670
Installation Guide 40670 Kargo Master Rancho Cordova, CA 95742 800-343-7486 CustomerService@KargoMaster.com DATE: Installation Instructions 40670 *PLEASE READ ALL INSTRUCTIONS AND WARNINGS PRIOR TO ASSEMBLING,
Installation Instructions Kit, Base Rail Bracket Part # 31413
Installation Instructions Kit, Base Rail Bracket Part # 31413 Dealer / Installer: Provide a copy of these Instructions to the end user of this product. These Instructions provide important operating and
INSTALLATION INSTRUCTIONS GRILLE GUARD RAM 1500 PART # 5058/5058-2
INSTALLATION INSTRUCTIONS GRILLE GUARD PART # 5058/5058-2 PARTS LIST: Qty Description Qty Description 1 Grille Guard 8 12-1.75mm x 35mm Hex Bolts 2 Upper Frame Mounting s (for trucks without tow hooks
INSTALLATION INSTRUCTIONS GRILLE GUARD FORD ESCAPE
INSTALLATION INSTRUCTIONS GRILLE GUARD 08-010 FORD ESCAPE PARTS LIST: 1 Grille Guard 4 10-1.50mm x 30mm Hex Bolts 1 Driver/Left Frame Mounting 4 10mm Lock Washers 1 Passenger/Right Frame Mounting 6 10mm
HOUSE PARTS PACKED IN HOUSE BOX PARTS IN PLASTIC BAG (HARDWARE) PARTS IN SMALL PLASTIC BAG (FLOOR CLIPS) PARTS PACKED IN BUNDLE
Check parts against this list before starting assembly. Refer to illustrations on pages 6 and 7 to view house parts. If any shortages are found, refer to Packing Slip for claim instructions. Item 3 5 6
Le Max2. PennEngineering. September 26 th 2016 by Larry Zhang. 1
September 26 th 2016 by Larry Zhang PennEngineering 1 Overview 5.7-inch Super AMOLED display with 2560 1440 resolution (Quad HD /2K) 2.21-megapixel rear camera with dual pixel autofocus, 4K video capture;
AndyMark DART 12.
AndyMark DART 12 Part Number Description QTY These Parts Are Pre-Assembled by AndyMark am-0031 Bearing, 3/16"ID (R3) 1 am-0209 Bearing, 3/8"ID 1614ZZ 2 am-1028 Screw, #10-32x3/8 Pan Head Philips 8 am-1121
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Trans4mer Grille Guard/Winch Mount For Chevrolet Silverado 1500HD & 2500 Kit 68162 This WARN Trans4mer system can be customized to give your Chevy Silverado a wide variety of
INSTALLATION INSTRUCTIONS GRILLE GUARD 09-ON DODGE RAM PART #
INSTALLATION INSTRUCTIONS GRILLE GUARD 09-ON DODGE RAM PART # PARTS LIST: Qty Description Qty Description 1 Grille Guard 8 12-1.75mm x 35mm Hex Bolts 2 Brackets (for trucks without 22 12mm x 30.1mm OD
INSTALLATION INSTRUCTIONS 3 BULL BAR 99-04, 04 "HERITAGE" F-150/250LD 2WD, 97-04, 04 "HERITAGE" 4WD WD EXPEDITION/ WD EXPEDITION PART
INSTALLATION INSTRUCTIONS 3 BULL BAR PART #B-F1971;B-F2971 PARTS LIST: 1 Bull Bar 2 12-1.75mm x 130mm x 40mm Hex Bolts 1 Driver/Left Mounting Bracket 4 12-1.75mm x 35mm Hex Bolts 1 Passenger/Right Mounting
frame bracket Dodge x 2 & 4 x 4 (6-1/2 & 8 Boxes Includes Mega Cab)
, Rev 4 02/19 frame bracket 8552026 Dodge 3500 4 x 2 & 4 x 4 (6-1/2 & 8 Boxes Includes Mega Cab) 14 5 7 2 4 11 9 10 17 3 6 1 8 13 15 16 18 12 ITEM PART # DESCRIPTION QTY. 1 00085.50 FLAT WASHER 10 2 00248
Parts Catalog. S-Series Slicer Manual Frozen Option S13. Model:
, 07 995 ECN 08 Parts Catalog S S-Series Slicer Manual Frozen Option Model: S 05/0/07 Rev. G IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT.
INSTALLATION INSTRUCTIONS DODGE RAM 2 & 4WD 1500 PART # P5058
INSTALLATION INSTRUCTIONS 2009-13 DODGE RAM 2 & 4WD 1500 PART # P5058 PARTS LIST: Qty Description Qty Description 1 Grille Guard 12 12-1.75mm Hex Nuts 2 Upper Frame Mounting s (for trucks without tow hooks
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS SNYPER TUBULAR FENDERS APPLICATION: 2007-2017 Jeep Wrangler JK PART NUMBER: 62-1005, 62-1015 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1,2 2 FRONT FENDERS, DRIVER (1) AND PASSENGER
Assembly Instructions Model 7222 Drop Leaf Cabinet Cart
Assembly Instructions Model 7222 Drop Leaf Cabinet Cart GENERAL: 1. You have purchased model 7222. Overall dimensions of an assembled unit is 40 x 20 x 34.25 when drop leaves are up. 2. Should you need
Attachment Illustrated Parts List
Attachment Illustrated Parts List Attachment Mfg. No. Description 1695168 Catcher, Clean Sweep Twin, 38" MANUFACTURING, INC. 500 N. Spring Street / PO Box 997 Port Washington, WI 53074-0997 USA Part No.:
PARTS LIST CHARGER 2716 DB
PARTS LIST CHARGER 2716 DB 1 ITEM PART NO. DESCRIPTION QTY. 101 6495381 LEFT OUTER BEARING / PIVOT MOUNT 1 102 9121450 5/16-18 HEX NUT WITH NY-LOK INSERT - PACK OF 5 4 103 9121210 1/4-20 X 5/8 HEX BOLT
Installation Instructions
Important 1. Acclimate materials 24 hrs before installation. Maintain temperature controlled environment after installation 2. Install in accordance with manufacturer s installation instructions. Failure
SRX-2000 PARTS LIST. SRX SRX E Revision 100. Manual Part# PM
www.mkdiamond.com SRX-000 Early Entry Concrete Saw PARTS LIST MODELS p/n SRX-000 7 SRX-000 7-E Revision 00 0.008 Manual Part# 7-PM Caution: Read all safety and operating instructions before using this
Installation Instructions: Bumper (Part # SB76850) XJ Jeep Cherokee XRC Rear Bumper
NOTE: Carefully read entire instructions thoroughly before attempting to install this part. Parts Included Qty 93-7789 XJ XRC 1 93-7807 Bumper Mount Bracket: Drvr 1 93-7811 Bumper Mount Bracket: Pass 1
EURO CRATES EURO CRATE + FRONT ARCH (FLOOR MOUNT) (84 SIDES + EURO SWING BACK GATE)
EURO CRATES CRATES-9 206352 84 EURO CRATE + FRONT ARCH (FLOOR MOUNT) (84 SIDES + SIDE MOUNT BUMPER) 206352-90 90 EURO CRATE + FRONT ARCH (FLOOR MOUNT) (84 SIDES + EURO SWING BACK GATE) 206350 84 EURO CRATE
INSTALLATION INSTRUCTIONS 3"/4 BENT END SIDEBARS FORD F-150 SUPERCREW PART # DZ /DZ
INSTALLATION INSTRUCTIONS 09-12 FORD F-150 SUPERCREW PART # DZ 372697/DZ 372699 PARTS LIST: 1 Driver/Left Sidebar 4 1/2 Lock Washers 1 Sidebar 4 12mm x 32mm OD x 3mm Flat Washers 1 Driver/Left Mounting
Installation Type. Edge of Door. Pull (Hinge) Side Mounted. Hinge Edge of Door. Push (Stop) Side Mounted
Installation Instructions CAUTION An incorrectly installed or improperly adjusted door closer can cause property damage or personal injury. These instructions should be followed to avoid the possibility
HANDRAIL HEIGHT PER LOCAL CODE AUTHORITY
PLEASE READ PLEASE READ THESE INSTRUCTIONS THOROUGHLY PRIOR TO BEGINNING THE INSTALLATION! THIS INSTRUCTION SHEET IS INTENDED TO PROVIDE A SPECIFIC GUIDE TO FOLLOW FOR THE INSTALLATION OF THIS. CONTAINED
INSTALLATION INSTRUCTIONS AND PARTS LIST
INSTALLATION INSTRUCTIONS AND PARTS LIST VEHICLE APPLICATION: MODEL 250420 (12 X 20 ) & 250423 (12 X 23 ) FRONT OR REAR MUDGUARDS 2004 AND NEWER FORD F-150 SERIES TRUCKS 1. READ INSTRUCTIONS COMPLETELY
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Trans4mer Grille Guard/Winch Mount Kit 645 For Chevrolet Silverado 500HD & 3500 This WARN Trans4mer system can be customized to give your Chevy Silverado a wide variety of looks,
Installation Instructions 3520WW/3520WWB Handrail
Important 1. Acclimate materials 24 hrs before installation. Maintain temperature controlled environment after installation 2. Install in accordance with manufacturer s installation instructions. Failure
Operating Instructions and Parts Manual 10-inch Table Saw
Operating Instructions and Parts Manual 10-inch Table Saw Model 66 shown with optional extension table and legs, mobile base, and motor cover WMH TOOL GROUP 2420 Vantage Drive Elgin, Illinois 60123 Part
FRAME BRACKET. Doing Our Best to Provide You the Best. Ford F250, F350 & F parts list. Page 1. 2/17 HJ32002,Rev 2.
2/17 HJ32002,Rev 2 BOlt torque specifications MEtRiC BOlts size Grade torque 8mm 8.8 23 ft/lbs. 10mm 8.8 45 ft/lbs. 12mm 8.8 78 ft/lbs. 14mm 8.8 125 ft/lbs. standard BOlts size Grade torque 5/16 5 18 ft/lbs.
INSTALLATION INSTRUCTIONS / DODGE RAM CREW CAB 2500/3500
INSTALLATION INSTRUCTIONS 225019 / 225019-2 2010 DODGE RAM CREW CAB 2500/3500 PARTS LIST: Qty Description Qty Description 1 Driver/Left Side Bar 4 Plastic Square Retainer 1 Side Bar 2 12mm x 120mm Hex
Installation Instructions
Installation Instructions CAUTION An incorrectly installed or improperly adjusted door closer can cause property damage or personal injury. These instructions should be followed to avoid the possibility
IMPORTANT: PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE
IMPORTANT: PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE 005-07 Cadillac STS Classic 3D Z, Classic Dual Weave, Classic Mesh & Classic Black Mesh Grilles B 7 HR 3 STS Classic 3D Z Grille Part
INSTALLATION INSTRUCTIONS ATV PLOW Mount Kit: PN Application: Sportsman 400, Magnum 425
INSTALLATION INSTRUCTIONS ATV PLOW Mount Kit: PN 37845 Application: 1996-97 Sportsman 400, 1997-98 Magnum 425 Your safety, and the safety of others, is very important. To help you make informed decisions
Section J DISTRIBUTOR
Section J DISTRIBUTOR December 2009 1J Index No. Part No. Description 1. 47-094344-003 Front Pulley Shaft 2. 47-091905-003 R.H. Turn Plate 3. 11-051038-001 Hex Hd. Cap Screw (8 mm x 16 mm) 4. N.A. Distributor
Fastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength
Fastener Basics Common Fastener Types Fastener Grade (US) or Class (metric) refers to the mechanical properties of the fastener material. Generally, a higher number indicates a stronger, more hardened
SLOTTED SCREW THREAD FLAT or ROUND FILLISTER BINDING PAN TRUSS POINT # SIZE MIN. MAX. DIA. OVAL HEAD HEAD HEAD HEAD HEAD HEAD
Phillips SHEET METAL SCREWS WOOD SCREWS MACHINE SCREWS PHILLIPS FLAT, ROUND, OVAL FLAT, FLAT, OVAL ROUND, TRUSS, BRAZIER POINT # STOVE BINDING OVAL ROUND BINDING FILLISTER BUTTON 0 0, 1 0, 1 0, 1 0, 1
GRILLE GUARD SPRINTER VAN (EXCLUDES X4) INCLUDES MERCEDES, FREIGHTLINER AND DODGE PARTS LIST:
PARTS LIST: 1 Grille Guard 8 12mm Hex Nuts 1 Driver/Left Side Frame Mounting Bracket 2 10-1.50mm x 25mm Button Head Bolts 1 Passenger/Right Side Frame Mounting Bracket 4 10mm x 20mm OD x 2mm Flat Washers
The Derby Magic Company Track Assembly Instructions, revision F page 1 of 13
The Derby Magic Company Track Assembly Instructions, revision F page 1 of 13 Thank you for purchasing a Derby Magic Pinewood Derby Track. To assemble your track, start with the stand. The parts of the
Special Thumb Screw Order Form
Special Thumb Screw Order Form QUOTE FOR: ORDER FOR: Name: Company: Address: QUANTITY: Phone #: City: State: Zip: Email Address: FILL IN YOUR DIMENSIONS write directly over light blue type* write clearly
INSTALLATION INSTRUCTIONS CONTOURED LIGHT BAR APPLICATION: CHEVY EQUINOX/ GMC TERRAIN PART NUMBERS: ,
INSTALLATION INSTRUCTIONS CONTOURED LIGHT BAR APPLICATION: 2010-2014 CHEVY EQUINOX/ GMC TERRAIN PART NUMBERS: 32-21020, 32-21025 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 1 CONTOUR BAR TORQUE WRENCH 2 1
Size Grade Torque 9/ ft/lbs. 5/ ft/lbs. 3/ ft/lbs. 7/ ft/lbs ft/lbs.
8-3 HJ3205,Rev 4 BOlT TORQUE SPECIfICATIONS STANDARD BOlTS: Size Grade Torque 5/6 5 20 ft/lbs. 3/8 5 35 ft/lbs. 7/6 5 56 ft/lbs. /2 5 85 ft/lbs. Size Grade Torque 9/6 5 23 ft/lbs. 5/8 5 70 ft/lbs. 3/4
INSTALLATION INSTRUCTIONS, AND PARTS LIST
INSTALLATION INSTRUCTIONS, AND PARTS LIST LB20 SERIES RAMPS Link Mfg. Ltd. 223 15th St. N.E. Sioux Center, IA USA 51250-2120 (712) 722-4868 Fax (712) 722-4779 QUESTIONS? CALL CUSTOMER SERVICE 1-800-248-3057
4Post Shelving Assembly Instructions
4Post Shelving Assembly Instructions ATTENTION: BEFORE STARTING ASSEMBLY, DETERMINE WHICH STYLE OF SHELVING IS TO BE BUILT AND FIND THE CORRESPONDING SECTION OF THE INSTRUCTIONS. READ ALL INSTRUCTIONS
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS SPORTSMAN WINCH MOUNT GRILLE GUARD APPLICATION: 2016-2018 Toyota Tacoma PART NUMBER: 40-93885, 45-93880, 46-23885 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 1 WINCH TRAY 15MM SOCKET
A = 4-1/2 B = 1/4 C = 5/16. Pin Dia. Use with C-11, C-12, C-13, C-19 Use with C-10, C-12, C-13, C dia. A = 4-1/3 A = /16 1-5/8
B C-10 Dia. Pin C-11 Dia. Pin C-12 Dia. Pin Bi-fold Pins & Associated Parts A A = 4- B = C = A = 4-1/6 B = C = A = 4- B = C = C Pin Dia. C-11, C-12, C-13, C-19 C-10, C-12, C-13, C-16 C-13 Dia. Cap C-16
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS R5 STEP BOARD APPLICATION: 2009-2017 Dodge Ram 1500 Quad / Crew Cab 2010-2017 Dodge Ram 2500/3500 Crew Cab PART NUMBER: 28-51040, 28-51045, 28-51050, 28-51055 ITEM QUANTITY DESCRIPTION
FITTINGS, SCREWS, BOLTS, ETC.
5mm Connecting 3 Mending Plate Order number... 19-116 For 5/8 to 5/8...19-168 For 3/4 to 3/4...19-170 Packaged 5 pieces Finish: Bright Nickel Packaged 5 pieces Finish: Zinc Plated Connecting Bracket For
Hardware. Brackets. Cast Chrome Plated Zamac Door Pack for High Pressure Laminate Compartments T O I L E T P A R T I T I O N S
Brackets 1a Stamped Stainless Steel U Bracket available in 1/2,3/4, 7/8 and 1 2a Stamped Stainless Steel T Bracket available 1/2, 3/4, 7/8 and 1 3a Stamped Stainless Steel F Bracket available in 1/2, 3/4,
Parts Catalog. S-Series Slicer Smart Manual SG13. Model:
, 07 99507 ECN 065 Parts Catalog S-Series Slicer Smart Manual Model: SG SG 0/0/07 Rev. G IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT. GLOBE
Assembly & Installation Instructions
Assembly & Installation Instructions FOR SUBFRAME COMPONENTS PACKAGE 100760 TO FIT 1-2004 TOYOTA TACOMA 4x4 16-2002 TOYOTA 4 RUNNER 4x4 22 SERIES ONLY 2008 Sno-Way International 7101078B 1. THINK SAFETY,
Installation Instructions
Installation Instructions For Models: Model Number / Description File Name 1540 Classic Series P-Lam Toilet Partitions 1540.pdf 1 INSTALLATION INSTRUCTIONS LAMINATED PLASTIC TOILET PARTITIONS 1540 Classic
4832A Installation Sheet Part List
4832A Installation Sheet Part List (1) 4016A-43-003 Qty 1- (2) 4016A-43-002 Qty 1- (3) 4016A-43-001 Qty 2- (4) 4016A-10-005 Qty 1- (5) 4016A-43-004L Qty 1- Mounting Bolt Kit (A) (K) Qty 2 - Qty 6 - M10
K/D FITTINGS & FASTENERS
K/ FITTINGS & FASTENERS -1 Screws P. 162-168 -2 Connector Bolts P. 169-173 -3 K/ Fittings P. 174-177 -4 Insert Nuts P. 178-181 -5 Allen Keys P. 182-183 -6 Nails & Wall Plugs P. 184 -1 Screws 1010 Machine
INSTALLATION INSTRUCTIONS PART#:17A096400MSS\17A096400MA MODULAR GRILL GUARD FOR TOYOTA TACOMA 05-09
INSTALLATION INSTRUCTIONS PART#:17A096400MSS\17A096400MA MODULAR GRILL GUARD FOR TOYOTA TACOMA 05-09 1 guard, center section 1 brush guard, left side 1 brush guard, right side 1 wire guard insert, left
7141 & NATIONAL POLE VAULT STANDARDS SPECIFICATIONS
SPECIFICATIONS Specifications: This standard has a clamping system and a handle added for ease of operation. The clamping system is above the base pad protectors when in the lowest position and the tightening
CATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS MODEL 6115 POTATO PEELER ML-137600 ML-137601 PRIOR MLS COVERED IN THIS CATALOG ML-19869 ML-19683 A product of HOBART 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 43064 Rev.
CIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD METAL SCREWS. 6 x 3/4 P/N x 1 METAL SCREW P/N x 3/4 METAL SCREW
A21-1 1160 CIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD S For light duty applications in solid materials Color coded diameters for easy identifi cation Acid resistant NYLON FLANGED:
ANCHORHD- Heavy Duty Anchors RW List Prices Page L - 1. Vertigo (Sammy) Rod hangars. Cap Screws. Drop-In Anchors. Coach Screws.
ANCHORHD- Heavy Duty Anchors RW List Prices Page L - 1 Cap s Vertigo (Sammy) Rod hangars 03512000 1/4 20pk Zinc Plated Cap 3.18 03501210 3/8 15pk Zinc Plated Cap 4.78 03501220 1/2 10pk Zinc Plated Cap
Nokia 6 Cellphone. PennEngineering. April 7th, 2017 Xiaoming Chen. 1
Nokia 6 Cellphone April 7th, 2017 Xiaoming Chen PennEngineering 1 Overview Nokia 6 has a 5.5-inch FHD IPS display with a polarizer film covered with 2.5D Gorilla Glass for protection. The smartphone comes
Big Block Chevrolet Installation Manual For Systems with A/C #14220 / #14120
Big Block Chevrolet Installation Manual For Systems with A/C #14220 / #14120 Billet Specialties, Inc. 500 Shawmut Ave. La Grange, IL 60526 Tech Line (708) 588-0505 Fax (708) 588-7181 PLEASE READ ALL INSTRUCTIONS
3400 E. WALNUT STREET COLMAR, PA DORMAN / ROCKFORD
WEATHERLY #770 D-2013-A JUNE 2013 SUPERSEDES R-2009-F APR. 2009 2013 DORMAN / ROCKFORD 1-800-523-2492 Corporate Office & Customer Service www.dormanproducts.com 2013 Dorman Products, Inc. No reproduction
A - Railing Frame Material Specifications
A - Railing Frame Material Specifications NOTE: We strongly recommend stainless steel for exterior applications. R-1 8/1/02 B Stainless Steel Spacers (For Horizontal Railing Double Post End Post using
Side Katerack Installation Instructions
Side Katerack Installation Instructions Ram ProMaster City 2015+ Frame Kit Part #: CRC 28-1000-001 V1.0.12.06.18 IMPORTANT INSTALLATION STEPS ARE DENOTED USING A STOP SIGN. THESE STEPS MUST BE PERFORMED
INSTRUCTIONS INSTRUCCIONES CONSIGNES
AUTOMOTIVE PRODUCTS, INC. INSTRUCTIONS INSTRUCCIONES CONSIGNES APPLICATION: GMC SIERRA 1500 HDX & SPORTSMAN GRILLE GUARDS (2014 & UP) APPLICATION PART # S 57-3690, 57-3695, 40-3695, 45-3690 ITEM QUANTITY
FNW can handle all your hanger and fastener needs, all in one place. FNW products are sold exclusively at Ferguson.
FASTENERS PIPE HANGERS, SUPPORTS & STRUT ACCESSORIES FNW can handle all your hanger and fastener needs, all in one place. FNW products are sold exclusively at Ferguson. Quick Reference Nuts Heavy Hex Nuts...4
The Derby Magic Company Track Assembly Instructions, revision E page 1 of 12
The Derby Magic Company Track Assembly Instructions, revision E page 1 of 12 Thank you for purchasing a Derby Magic Pinewood Derby Track. To assemble your track, start with the stand. The parts of the
INSTALLATION INSTRUCTIONS FOR PLASCORE NARROW STILE DOORS
INSTALLATION INSTRUCTIONS FOR PLASCORE NARROW STILE DOORS The following information is provided by Plascore, Inc., as a general guideline for the installation of the Plascore Narrow Stile Door and Jamb
UP4 LEARN-A-LOT (PLAYFUL) Parts List DESCRIPTION 90 ANGLE BRACKET DOOR WINDOW MUSIC CATERPILLAR CIRCLE FRAME CIRCLE MIRROR YELLOW STAINED GLASS RED STAINED GLASS SQUARE TRIANGLE SPIRAL WHEEL SQUARE MIRROR
CATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS HS4N SLICER ML-136338 HS4N A product of HOBART 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 43311 (August 2015) F-43311 (August 2015) - 2 - HOBART 2015 Table of Contents
Rear Mount Installation Instructions
Rear Mount Installation Instructions Ford Transit Low Roof 130 WB Frame Kit Part #: DTC 0809-011 V1.0.10.12.18 IMPORTANT INSTALLATION STEPS ARE DENOTED USING A STOP SIGN. THESE STEPS MUST BE PERFORMED
RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS
RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side.