Hardware. Brackets. Cast Chrome Plated Zamac Door Pack for High Pressure Laminate Compartments T O I L E T P A R T I T I O N S
|
|
|
- Sabrina Golden
- 5 years ago
- Views:
Transcription
1 Brackets 1a Stamped Stainless Steel U Bracket available in 1/2,3/4, 7/8 and 1 2a Stamped Stainless Steel T Bracket available 1/2, 3/4, 7/8 and 1 3a Stamped Stainless Steel F Bracket available in 1/2, 3/4, 7/8, 1 and 11/4 4a Aluminum U Bracket, available in 1 5a Aluminum T Bracket, available in 1 6a Aluminum F Bracket, available in 1 and 11/4 7a Zamac U Bracket available in 7/8 and 1 8a Zamac T Bracket available in 3/4, 7/8 and 1 and 11/4 9a Zamac F Bracket 3/4, 7/8, 1 and 11/4 Shoes 1b Stainless Steel shoe for Baked Enamel and Stainless Steel 2b Plastic vinyl shoe for Plastic available in 1 X 3 H 3b Stainless Steel shoe for HPL 3 H available in 3/4, 1 and 11/4 4b Stainless Steel shoe for Phenolic core 5 H available in 3/4 and 1 5b 6b L Plate available in 3/4 L Plate available in 11/4 Cast Chrome Plated Zamac Door Pack for High Pressure Laminate Compartments 1c Top Adjustable Hinge Set 2c Inswing Door Hook 3c 4c 5c Inswing Keeper 6c Bottom Adjustable Hinge Set 7c Outswing and Inswing Slide Latch 8c Outswing Door Pull 9c Outswing Keeper *Optional on Phenolic Core 15
2 A M P C O P R O D U C T S Clear Satin Anodized Aluminum Door Pack for Solid Plastic (HDPE) Compartments 1d 2d 3d 4d 5d 6d 7d Inswing Keeper Outswing Keeper 8 RH or LH adjustable hinge set Inswing Outswing Slide Latch Outswing Door Pull Stainless Steel Door Pack for Phenolic Core Compartments 1e Outswing Door Pull 2e Inswing and Outswing Slide Latch 3e Inswing Keeper 4e Outswing Keeper 5e Bottom Adjustable Hinge 6e Top Adjustable Hinge 7e 8e Inswing Door Hook 9e *Optional on High Pressure Laminate Cast Chrome Plated Zamac Door Pack for Stainless Steel and Baked Enamel Compartments 1f 2f 3f 4f 5f 6f 7f 8f 9f Inswing Keeper Outswing Keeper Outswing Door Pull Inswing and Outswing Slide Latch Inswing Door Hook Bottom Adjustable Hinge Set Top Adjustable Hinge Set 16
3 Stainless Steel Door Pack for Stainless Steel and Baked Enamel Compartments 1g Inswing Keeper 2g Outswing Keeper 3g 4g Inswing Door Hook 5g 6g Inswing and Outswing Slide Latch 7g Outswing Door Pull 8g Bottom Adjustable Hinge Set 9g Top Adjustable Hinge Set Stainless Steel Door Pack for Solid Surface Compartments 1h 2h 3h 4h 5h 6h 7h 8h Surface Mounted Adjustable Hinge Top Surface Mounted Adjustable Hinge Bottom Inswing Keeper Split Emergency Outswing/Inswing Keeper Split Bumper Inswing and Outswing Slide Latch Inswing Door Hook Euroline (No Sight Line) 1i 2i 3i Pedestal Stainless Steel Finished Aluminum available in 1/2 and 3/4 Stainless Steel Finished Aluminum L Bracket available in 1/2 and 3/4 Stainless Steel Finished Aluminum Hinge available in 1/2 and 3/4 Three (3) per door 4i Outswing Keeper Finished Aluminum 5i Inswing Keeper Finished Aluminum 6i Inswing Door Hook Finished Aluminum 7i Outswing Slide Latch with occupancy indicator Finished Aluminum 8i Inswing Slide Latch Finished Aluminum 9i Outswing Door Pull Finished aluminum *Optional on High Pressure Laminate, Phenolic Core, Solid Surface, and Solid Surface Veneer 17
4 A M P C O P R O D U C T S Hinges 1j 2j 3j 4j 5j 6j 7j Satin Anodized Aluminum Hinge for Solid Plastic 8 RH or LH Bottom Bracket Hinge Stainless Steel for Phenolic Top Hinge Stainless Steel for Phenolic Surface Mounted Hinge set, cast stainless steel Zamac Bottom Door Hinge for HPL Zamac Top Door Hinge for HPL Brass Surface Mounted Hinge set Stainless Steel and Vinyl 1k Inswing and Outswing Stainless Steel Continuous Camed Hinge 54, with 0 o or 20 o cam hinge 2k U Bracket available in 1/2, 3/4 and 1 by 3k F Bracket available in 1/2, 3/4,1 and 11/4 by 4k T Bracket available in 1/2, 3/4 and 1 by 5k F Bracket Vinyl Plastic 1 x 54 6k T Bracket Vinyl Plastic 1 x 54 Aluminum Miscellaneous 1l Aluminum Continuous Adjustable Spring Tension Hinge 54 with cover plates 2l Angles available in 1/2,1 and 11/2 3l Square Tube 11/4 4l Length Headrail available in 3/4, 1 and 11/4 5l U Bracket available in 1/2, 3/4 and 1 by 6l F Bracket available in 1/2, 3/4, 1 and 11/4 by 7l T Bracket available in 1/2, 3/4 and 1 by 8l Post Shoe 11/4 Chrome 9l 11/4 Post End Cap 10l End plug for HeadRail available in 3/4, 1 and 1-1/4 11l Chrome Bead Hook (for showers) 18
5 Fasteners Item Code Ceiling Hung 1m Threaded Rod m Washer 439-CH WASHER 5m Nut 439-TR NUT Floor Mounted 3m Threaded Rod m Washer 439-WASHER 5/16 5m Nut 439-TR NUT 6m Rawl 439-RAWL 7m Nut Pro 439-T NUT PRO 8m Tap 439-TAP 1-4 Item Phenolic Core Aluminum High Pressure Laminate Chrome Plated Zamac 1/2" 3/4" 1" 7/8" 1" 1-1/4" 1" 7/8" 1-1/4" 9m #12 x2" Anchor Screw m Lead Anchors m Plastic Anchors m #12 x7/16" SS Blunt Pt. Screw m #10 x1" SS Tap Screw N/A N/A m #10 x1" SS Tap/Phillip Screw N/A N/A (ss six lobe) (Phillips) 15m Security Six Lobe Drive Bit 439- T20 / 439-T27 16m #8-32 Unslotted Barrel Nut m #8-32 Six Lobe Oval head N/A N/A m #10-24 Barrel Nut m #10-24 Shoulder Screw
Installation Instructions
AMPCO Stainless Steel and Baked Enamel Toilet Partitions AMPCO Florida 11400 NW 36 th Avenue Miami, FL 33167 T. 305.821.5700 florida@ampco.com AMPCO Texas 201 Railroad Avenue Sanger, TX 76266 T. 940.458.7401
Melamine Plastic Laminate. Toilet Partition Installation Manual
Melamine Plastic Laminate Toilet Partition Installation Manual PHONE: FAX: 1-866-317-2786 ATTENTION DO NOT MIX FASTENER PACKS EACH FASTENER PACK HAS THE NECESSARY BOLTS, BARRELS AND SCREWS TO INSTALL THE
EUROLINE CLASSIC PHENOLIC / EVERGREEN. Installation Instructions. Installation Instructions.
EUROLINE ASSIC PHENOLIC / EVERGREEN EUROLINE ASSIC PHENOLIC / EVERGREEN Before you begin, please note the following considerations: Safety First! Please use proper safety gear when performing any installation.
EUROLINE CLASSIC SOLID SURFACE Installation Instructions
EUROLINE ASSIC SOLID SURFACE Installation Instructions 12/01/15 EUROLINE ASSIC SOLID SURFACE Installation Instructions Before you begin, please note the following considerations: Safety First! Please use
Toilet Partition Hardware
Concealed and Surface Mounted Latches Toilet Partition Hardware D D 91-8 Used with 91-129 Housing merican Metal 91-330 Used with 91-129 Housing 91-84 91-130 For 1" Laminated Door 91-131 With Flat Tip Bar.
Installation Manual for Metal Toilet Partitions Standard Series
For Video instructions http://www.hadrian-inc.com/tech-data/installation/toilet-partitions.aspx P a g e 1 Table of Contents Page General Notes and Tools Required 3 STEP 1: Establish Floor Bracket Locations
Installation Instructions
AMPCO Compact Laminate (Phenolic) Toilet Partitions AMPCO Florida 11400 NW 36 th Avenue Miami, FL 33167 T. 305.821.5700 florida@ampco.com AMPCO Texas 201 Railroad Avenue Sanger, TX 76266 T. 940.458.7401
Installation Instructions for 30, 40, and 50 Series Plastic Laminate Toilet Partitions.
GENERAL PARTITIONS Mfg. Corp. 170 Peninsula Drive, Erie PA 16505-443 P.O. Box 8370, Erie, PA 16505-0370 Phone (814) 833-1154 FAX (814) 838-3473 Installation Instructions for 30, 40, and 50 Series Plastic
Installation Manual for Metal Toilet Partitions Elite & Elite Plus Series
P a g e 1 Table of Contents Page General Notes and Tools Required 3 STEP 1: Establish Floor Bracket Locations 4 STEP 2: Fasten Floor Brackets 4 & 5 STEP 3: Erect Panels 6 STEP 4: Erect Wall Pilaster 7
Installation Instructions
AMPCO Solid Plastic Toilet Partitions AMPCO Florida 11400 NW 36 th Avenue Miami, FL 33167 T. 305.821.5700 florida@ampco.com AMPCO Texas 201 Railroad Avenue Sanger, TX 76266 T. 940.458.7401 texas@ampco.com
STANDARD STALL INSTALLATION DETAIL
14" NOTE: ALUMINUM HEAT SINC STRIP TO BE MOUNTED AT BOTTOM OF PANELS & DOORS. STANDARD STALL INSTALLATION DETAIL ALCOVE WITH ADJOINING STALL INSTALLATION DETAIL ALCOVE INSTALLATION DETAIL C L OF PILASTER
Stainless Steel 95C34 Series
Stainless Steel 95C34 Series Toilet Partition Installation Manual PHONE: FAX: 866-317-2786 ATTENTION DO NOT MIX FASTENER PACKS EACH FASTENER PACK HAS THE NECESSARY BOLTS, BARRELS AND SCREWS TO INSTALL
AMPCO PRODUCTS, INC. TECHNICAL SPECIFICATIONS SOLID PHENOLIC CORE TOILET COMPARTMENTS
PART 1 - GENERAL 1.1 RELATED DOCUMENTS TECHNICAL SPECIFICATIONS SOLID PHENOLIC CORE TOILET COMPARTMENTS A. Drawings and General Provisions of Contract, including General and Supplementary Conditions and
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS LAMINATED P LASTIC TOILET PArTITIONS 1540 ClassicSeries with Options IMPORTANT: Storage and Handling Information on last page. For faster, easier installation, please review these
BioPrism Solid Surface
Please read all instructions before installing products. These instructions are intended for use with InPro s standard toilet partitions, which include 58 high doors and wall panels, when deviating from
Installation Manual. Solid Plastic Toilet Partitions. IN CANADA & AREAS OTHER THAN U.S.A.: IN THE U.S.A.:
Installation Manual Solid Plastic Toilet Partitions Toilet Partitions & Lockers IN THE U.S.A.: Hadrian Inc., 7420 Clover Avenue, Mentor, OH 44060 Telephone: 440-942-9118 Fax: 440-942-9618 U.S. toll free
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS HIGH PRESSUE LAMINATE (HPL) TOILET PARTITIONS 1030 TrimLineSeries 1040 DesignerSeries Includes continuous hardware option.65. IMPORTANT: Storage and Handling Information on last
Section 3: Understanding Your Shop Drawings Reading Shop Drawing Abbreviations 60" O.A. stands for the overall dimension from the back wall to the front face of achieve your 60" overall you will set the
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS SOLID PHENOLIC TOILET PARTITIONS 1080 DuraLineSeries Class-A Fire Rated Includes Institutional Hardware Option.67 IMPORTANT: Storage and Handling Information on last page. Review
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS HIGH PRESSUE LAMINATE (HPL) TOILET PARTITIONS 1030 TrimLineSeries 1040 DesignerSeries Includes continuous hardware option.65. IMPORTANT: Storage and Handling Information on last
Installation. *HDWC-INSTR-007* HDWC-INSTR-007 Rev. K; ECN G 2018 Bradley Page 1 of 24 3/22/2018
Installation Phenolic Restroom Partitions, Ceiling-Hung Series 600 Table of Contents Pre-Installation Information... 2-3 Layout Dimensions for rackets...4 Mounting rackets to Wall... 5-6 Leveling rackets
Installation Instructions
Installation Instructions For Models: Model Number / Description File Name 1540 Classic Series P-Lam Toilet Partitions 1540.pdf 1 INSTALLATION INSTRUCTIONS LAMINATED PLASTIC TOILET PARTITIONS 1540 Classic
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS COMPACT LAMINATE TOILET PARTITIONS 1080 DuraLineSeries 1180 DuraLineSeries Class-A Fire Rated Includes Institutional Hardware Option.67 IMPORTANT: Storage and Handling Information
Installation *HDWL-INSTR-001* IMPORTANT. Plastic Laminate Restroom Partitions Floor-Mounted with Overhead Brace Series 400
Plastic Laminate Restroom Partitions Floor-Mounted with Overhead race Series 400 For Standard Height Doors and Panels Only Table of ontents Pre- Information...2 Layout Dimensions for rackets...3 Mounting
INSTALLATION INSTRUCTION
INSTALLATION INSTRUCTION Plastic Laminate Series contents page 1030 TrimLineSeries...2-21 1040 DesigerSeries...2-21 Urinal Screens, Benches, Shower Seats...22-31 2030 TrimLineSeries Maximum Privacy...32-47
Table of Contents IMPORTANT
For Standard Height oors and Panels Only Plastic Laminate Restroom Partitions eiling-hung Series 600 Table of ontents Pre- Information...2 Layout imensions for rackets...3 Mounting rackets to Wall...4
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS MAXIMUM PRIVACY HIGH PRESSURE LAMINATE (HPL) TOILET PARTITIONS 2030 TrimLineSeries 2040 DesignerSeries IMPORTANT: Storage and Handling Information on last page. Review these instructions
INSTALLATION INSTRUCTION
INSTALLATION INSTRUCTION Soild Phenolic Series contents page 1080 DuraLineSeries...2-21 1180 DuraLineSeries...2-21 2080 DuraLineSeries Maximum Privacy...22-41 2180 DuraLineSeries Maximum Privacy...22-41
Installation. *HDWC-INSTR-008* HDWC-INSTR-008 Rev. H; ECN G 2018 Bradley Page 1 of 24 3/22/2018
Installation Phenolic Restroom Partitions Floor-To-Ceiling Series 700 For Standard Height Doors and Panels Only Table of Contents Pre-Installation Information... 2-3 Layout Dimensions for rackets...4 Mounting
Submittal Transmittal
Submittal Transmittal Detailed, Group by Number Date: 1/9/2014 Reference Number: 0653 Transmitted To: Jenn Foskett Transmitted By: Tristie Tajima W H Cress Company Inc. Skanska USA Building Inc. 1824 Bickford
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS SOLID PHENOLIC TOILET PARTITIONS 1080 DuraLine Series 1180 DuraLine Series Class-A Fire Rated IMPORTANT: Review these instructions thoroughly prior to installation. FLOOR ANCHORED
IMPORTANT: installation. FLOOR ANCHORED CEILING HUNG OVERHEAD BRACED FLOOR-TO- CEILING ANCHORED
INSTALLATION INSTRUCTIONS MAXIMUM PRIVACY COMPACT LAMINATE TOILET PARTITIONS 2080 DuraLineSeries 2180 DuraLineSeries Class-A Fire Rated Includes Institutional Hardware Option.67 IMPORTANT: Storage and
Installation. *HDWC-INSTR-006* HDWC-INSTR-006 Rev. K; ECN G 2018 Bradley Page 1 of 24 3/22/2018
Installation Phenolic Restroom Partitions Floor-raced Series 500 For Standard Height Doors and Panels Only Table of Contents Pre-Installation Information... 2-3 Layout Dimensions for rackets...4 Mounting
Table of Contents IMPORTANT
Plastic Laminate Restroom Partitions Floor-raced Series 500 For Standard Height Doors and Panels Only Table of ontents Pre- Information...2 Layout Dimensions for rackets...3 Mounting rackets to Wall...4
INSTALLATION INSTRUCTIONS FOR ALPACO CLASSIC PARTITIONS
INSTALLATION INSTRUCTIONS FOR ALPACO CLASSIC PARTITIONS Table of Contents Topic Page Layout and Wall Brackets 2 Panel and Pilaster Prep. 3 Securing Components and Headrail 4 Panel to Pilaster/Wall Assembly.....
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Special-Lite Restroom Partitions IMPORTANT - BEFORE YOU START... 1. Read through these installation instructions first to understand the order of work. 2. Check all components
INSTALLATION INSTRUCTIONS SierraSeries SOLID COLOR REINFORCED COMPOSITE (SCRC) TOILET PARTITIONS
INSTALLATION INSTRUCTIONS SierraSeries SOLID COLOR REINFORCED COMPOSITE (SCRC) TOILET PARTITIONS CONTENTS PAGE 1090 with Heavy-Duty Hardware 2-24 1090.67 with Institutional Hardware 25-47 In the United
INSTALLATION INSTRUCTIONS FOR ALPACO CLASSIC PARTITIONS
INSTALLATION INSTRUCTIONS FOR ALPACO CLASSIC PARTITIONS Table of Contents Topic Page Layout and Wall Brackets 2 Panel and Pilaster Preparation.. 3 Securing Components and Headrail 4 Panel to Pilaster/Wall
Door Closers. General Information
General Information Hager Companies offers a variety of surface door closers to meet a wide range of applications and uses. Heavy Duty, Grade 1 door closers are ideal for schools, hospitals, and other
TIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 TIRE RACK INSTALLATION INSTRUCTIONS 07-11 Dodge Sprinter Please read before beginning Stainless steel hardware may bind together
INSTALLATION INSTRUCTIONS FOR FRONT CASTING DECK RAIL Ranger
INSTALLATION INSTRUCTIONS FOR FRONT CASTING DECK RAIL Ranger TOOLS REQUIRED FOR INSTALLATION: Drill motor, (1) 5/16 inch drill bit, (1) 13/64 drill bit, (1) 3/16 inch hex wrench (1) 3/32 inch hex wrench.
Mast Solutions Document/Installation Manual
Mast Solutions Document/Installation Manual The Mast family from Veritas is the perfect answer to movable and stationery partitions and room dividers, and hinged doors. This system is extremely versatile
Oxford Stalls Installation Instructions
Oxford Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 8/15/17 Before You Start Typical stall sizes are 10 x 10, 12 x 12 or
Flooring Nails 6-D Flooring Nails $3.40 / 1# 6-D Flooring Nails $14.50 / 5# 8-D Flooring Nails $3.40 / 1# 8-D Flooring Nails $14.
Nails Nails Drywall Screws Common Nails 4D Common Nails $3.85 / 1# 6D Common Nails $3.00 / 1# 6D Common Nails $74.25 / 50# 8D Common Nails $3.00 / 1# 8D Common Nails $74.25 / 50# 10D Common Nails $3.00
Installation Type. Edge of Door. Pull (Hinge) Side Mounted. Hinge Edge of Door. Push (Stop) Side Mounted
Installation Instructions CAUTION An incorrectly installed or improperly adjusted door closer can cause property damage or personal injury. These instructions should be followed to avoid the possibility
Deadlatch & Deadbolt Accessories
Deadlatch & Deadbolt Accessories E-2232 (Brass plated finish - 2 per card) E-2233 (Antique brass plated finish - 2 per card) E-2234 (Chrome plated finish - 2 per card) E-2301 (Stainless steel finish -
Dublin Stalls Installation Instructions
Dublin Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 9/13/17 Part Identification Round Track Bracket (4) (Not Painted) Round
CHICKEN COOP & CHICKEN RUN. Tools required for assembly (not included)
CHICKEN COOP & CHICKEN RUN ASSEMBLY MANUAL SKU# 6839 Tools required for assembly (not included) Distributed by: TRACTOR SUPPLY COMPANY 0 VIRGINIA WAY, BRENTWOOD, TN 3707 For customer support, call: -888-376-960
Installation Instructions
Installation Instructions CAUTION An incorrectly installed or improperly adjusted door closer can cause property damage or personal injury. These instructions should be followed to avoid the possibility
Fine Builders and Home Hardware
Fine Builders and Home Hardware Since 1876, IVES has been manufacturing fine builders and home hardware with a tradition of product quality and customer service that has established them as an industry
HEADRAIL BRACED INSTALLATION MANUAL. Tools Required
Tools Required 4 ft. level Hammer Hammer drill Misc. screwdriver bits Hacksaw Misc. drill bits, including 4mm (5/32 ) & 8mm (5/16 ) 6mm (1/4 ) masonry bit 11mm (7/16 ) wrench 13mm (1/2 ) wrench Chalkline
Calf-Tel Pen System Assembly Instructions
Calf-Tel Pen System Assembly Instructions (Instructions work for 4, 6, and the 7 Pen Systems) 1 ASSEMBLY OF PEN FRONT AND WALLS START THE ASSEMBLY BY LINING UP THE TWO UNI-DIRECTIONAL ARROWS IN THE TOP,
800 SERIES. Heavy-Duty Commercial Grade 1 Surface Applied Closers. Standard Features. 3 hours fire rated. openings of the door.
800 SERIES Heavy-Duty Commercial Grade 1 Surface Applied Closers Standard Features n Performance Complies with ANSI A156.4, Grade 1, 2 million cycles, UL/ULC listed up to 3 hours fire rated n Chassis/Closer
SECTION BATHROOM ACCESSORIES
SECTION 10-20-00 BATHROOM ACCESSORIES PART 1 GENERAL 1.01 SCOPE OF WORK A. Include all supplied materials, to complete the work of the above referenced section. 1. SCS to supply bathroom accessories, Finish
Section 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS. Web. acrylicdesign.ie .
Section 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS Web. acrylicdesign.ie Email. sales@acrylicdesign.ie Acrylic Design 2004-2015 Mobile Cable System Components Single panel clamp Stand Off for
ASSA ABLOY Series Installation Instructions. Regular Arm. Parallel Arm. Top Jamb Mount. Multi-Sized 1 thru 6 Non-Hold Open and Hold Open Models
9500 Series Installation Instructions Multi-Sized 1 thru 6 Non-Hold Open and Hold Open Models Regular Pages 5 & 6 Parallel Pages 7 & 8 Top Jamb Mount Pages 9 & 10 IMPORTANT: An improperly installed or
Section F TEL-E-SCORE
Section F TEL-E-SCORE December 2009 1F Index No. Part No. Description 1. N.A. Support Bracket 2. N.A. Filler 3. N.A. Base Assembly 4. N.A. Wiring Diagram Decal 5. N.A. Lower Unit Cover 6. N.A. Flat Socket
SSRLS-3 / SSRLU-3 Installation Instructions
5mm Hex Nut Upper Telescoping hannel & Screws Packing List QTY. ITM 1 Top Telescoping hannel 1 ottom Telescoping hannel w/ self drilling screw 15" 18" 1 Top and ottom Rod with connecting arm 25-½ 2 ¼ -
FITTINGS, SCREWS, BOLTS, ETC.
5mm Connecting 3 Mending Plate Order number... 19-116 For 5/8 to 5/8...19-168 For 3/4 to 3/4...19-170 Packaged 5 pieces Finish: Bright Nickel Packaged 5 pieces Finish: Zinc Plated Connecting Bracket For
F l a t S c r e e n A R M S I n s t a l l a t i o n
ITEM NUMBERS (1) #TOACAORG16 (2) #TOACAORG20 (3) #TOACATRP24 (4) #TOACATRP30 (5) #TOACATRPDS (6) #TOACATRPSS TOOLS REQUIRED (1) 3/8 Wrench (not provided) (2) Phillips head screwdriver (not provided) (1)
Ready To Go SimpleSpec tm. Installation Manual. For more information, please visit 3-form.com or call
Contents Overview ( 1) 3/8" Varia Panel = Cable Tensioner with Cover Plate KIT Stainless Steel: 3-15-1636-K Black Oxide: 3-15-2005-K Cable Tensioner with Cover Plate SS: 3-15-1636 BO: 3-15-2005 + M8 Thread
DOOR STOPS & BUMPERS See page 321 for finish descriptions.
CR-DH25 US3, 26D 4" Zinc Diecast Drop Down Door Holder CR-SBDH5 US3, 10, 10B 5" Solid Brass Kick Down Door Holder. Base 7/8" x 1-3/4" (Ives #455) CR-GS118* US3, 4, 10, 10B, 15A Door Stop 2-1/8" high *w/hanger
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS SHOWER DOOR KIT ALUMINUM 2503 E. Vernon Avenue, Los Angeles, CA 90058-1826 Phone: (800) 421-6144 EXT. 7740 Fax: (800) 458-7496 crlaurence.com Email: showers@crlaurence.com 11M0260
Factory Assistance: Phone: Fax: Page 1
CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)
Hookbolt. Non Handed. Flat LH Bevel RH Bevel Radius Radius with Weather-strip. Radius Flat Bevel
Mortise Locks deadlatch Deadbolt Hookbolt Function: Deadbolt, Hookbolt, Deadlatch Backset: 31/32", 1-1/8", 1-1/2" Face Plate: 1"W x 6-7/8" L - Aluminum Case Dimensions: 7/8"W x 6"L x Depth specific to
New Product Release: October 2014 Boone Racks
New Product Release: October 2014 Boone Racks Double Fido Fountain Mounting: Surface NOTE: THESE ROUGH-IN DIMENSIONS MAY VARY ½: (13 mm) PLUS OR MINUS NOTE: All dimensions subject to manufacturing variance
Adams rite. Deadbolts, Deadlocks & Hookbolts Series maximum security laminated deadlocks/hookbolts
1850 Series maximum security laminated deadlocks/hookbolts dams rite Deadbolts, Deadlocks & Hookbolts For single leaf doors where the gap between door and jamb is large ccepts standard mortise cylinder
Cable Tray Kit: - Cable Tray - Cable Tray Cover - Power Block Support (x2) Top Support Kit: (x2) - 2 Top Supports. Quantities are per bench
Parts Included (per back to back bench) Column Kit: (x2) - 1 LH & 1 RH Column - Control Box - Hand Switch Cable Tray Kit: - Cable Tray - Cable Tray Cover - Power Block Support (x2) Depth Support Kit: -
FULLER CHISELS CUTTING TOOLS
CUTTING TOOLS Back FULLER CHISELS From the standard Wood Chisel to our top-of-the-line Woodworker s Chisel, FULLER offers the perfect combination of variety and quality in its chisel line-up. Finely honed
Silver Kite Architectural Ironmongery - Classic Range Mortice Knobs - 1 of 6
Mortice Knobs - 1 of 6 34020 34021 34022 34023 34020 Mortice knob knob diameter 66 rose diameter 66 34021 Mortice knob knob diameter 57 rose diameter 58 34022 Mortice knob knob diameter 49 rose diameter
TRUE TECHNICAL SERVICE MANUAL - ALL MODELS. DOORS/DRAWERS/LIDS
DOORS/DRAWERS/LIDS 55 56 NOTES DOORS/DRAWERS/LIDS Springs 97 TORSION SPRING REPLACEMENT GDM RADIUS FRONT - SWING DOOR INSTALLATION INSTRUCTIONS Tools Required (2) - 1 8" drift Punch (forged) Needle-Nose
Linear Hook- on Worksurfaces
Linear Hook- on Worksurfaces Linear Hook-On Worksurfaces come in three depths and seven lengths. Different worksurfaces have different reqirements for installation that are outlined below. 27 inch deep
INSTALLATION INSTRUCTIONS, AND PARTS LIST
INSTALLATION INSTRUCTIONS, AND PARTS LIST LB20 SERIES RAMPS Link Mfg. Ltd. 223 15th St. N.E. Sioux Center, IA USA 51250-2120 (712) 722-4868 Fax (712) 722-4779 QUESTIONS? CALL CUSTOMER SERVICE 1-800-248-3057
PLASTIC BALLCOCK Includes: Vinyl Refill Tube, Float Rod, Flange Nut, Washer, 5/8 or 1/2 Coupling Nut and Water Level Adjustable Screw.
Flush Valves PLASTIC BALLCOCK Includes: Vinyl Refill Tube, Float Rod, Flange Nut, Washer, 5/8 or 1/2 Coupling Nut and Water Level Adjustable Screw. Toilet Flappers 51005 10 Anti siphon 5 50 6.25 P51005
AIR ACTIVATED MODULAR INLET
AIR ACTIVATED MODULAR INLET 345678903456789034567890 345678903456789034567890 MI4 345678903456789034567890 345678903456789034567890 Each MI4 includes: - Modular Inlet - Counterweight - Hardware Package
Shetland Stalls Installation Instructions
Shetland Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 1/9/18 Before you start Kit can accommodate up to 12 wide stall front
Hardware Fitting Accessories Bolts
Lever action flush bolt With slide Width: 19 mm Stroke (a): 25 mm 1 Flush bolt 1 Set of fastening material With lever arm Width: 19 mm Stroke (a): 18 mm 1 Flush bolt 1 Set of fastening material Stainless
Installation Instructions. Installation Type
Installation Instructions 800 & 8050 Slide Track Door Closers Non Hold Open & Hold Open Models Note: Hold open models are not permitted to be installed in Listed fire door assemblies. PULL SIDE MOUNTED
11 6 Round Building Assembly Instructions
11 6 Round Building Assembly Instructions 11 6 Round Building Hardware List 1. Pro Rib Brite White 36 Wide X 68 Long (Siding Steel) 11 2. Top Wall Wheel Ring 3 3. Base Ring 3 4. 1 ½ X 68 Aluminum Tubes
Door Bolt - Satin Chrome. High quality solid brass, chrome plated surface fix bolt.
Bolts Door Bolt - Polished Brass Door Bolt - Polished Chrome Door Bolt - Satin Chrome Door Bolt - Florentine Bronze High quality solid brass surface fix bolt. High quality solid brass, chrome plated surface
TYPICAL STANDOFF GLASS RAIL ELEVATION TYPICAL SECTION RS0B20 WITH RECTANGULAR BACK PLATE TYPICAL STAIRS
Revisions By: CRL SRS STANDOFF RAILING SYSTEM CRL GLASS RAIL S RS0B20 w/ RECTANGULAR BACK PLATE CRL'S GLASS RAIL S CAN BE USED FOR MOUNTING GLASS PANELS UP TO 3/4" (19 MM) IN THICKNESS. THE 4" X 8" (102
Your global resource for quality commercial door hardware. Euroline Catalog Euroline Catalog
Your global resource for quality commercial door hardware. Catalog Catalog More for your door than any other brand. TM Industry-Leading Service For more than 158 years, Hager Companies has led the industry
Installation Instructions. Installation Type
Installation Instructions 300 & 3050 Slide Track Door Closers Non Hold Open & Hold Open Models Note: Hold open models are not permitted to be installed in Listed fire door assemblies. PULL SIDE MOUNTED
For installation assistance, contact SARGENT at DOORS SHOWN HERE SWING IN FOR ILLUSTRATION PURPOSES ONLY.
SARGENT Installation Instructions for LP8600 x LR8600 & 12-LP8600 x 12-LR8600 Series Low Profile Panic and Fire Exit Devices on Double Egress & Double Doors or LS8600 & 12-LS8600 Low Profile Exit Device
Glass Fittings. G l a s s F i t t i n g s. G l a s s F i t t i n g s. Contents
Glass Fittings Contents Shower Hinges - Premier Range Shower Hinges - Elite Range Bifold Hinges Shower Handles / Pulls Shower Extrusions / Seals Shower Brackets Glass Shelves, Brackets Glass Anchors /
Adams Rite. Standard & Heavy Duty Deadlatches Series Heavy Duty Deadlatch
Standard & Heavy Duty Deadlatches 4900 Series Heavy Duty Deadlatch Function: Flexibility of traffic control and installation is offered by the 4900 Series Deadlatches. A reverse turn of the key while bolt
ROMAN AND. Roller Lift System Continuous Cord Loop GETTING STARTED BRACKET INFORMATION INSIDE MOUNT. A few simple tools are required:
ROMAN AND WOVEN WOOD SHADES Roller Lift System Continuous Cord Loop GETTING STARTED BRACKET INFORMATION A few simple tools are required: The brackets you received with your product are REQUIRED for proper
Pivots / Padlocks / Hasps
/ Padlocks / Hasps 046-6270 046-770 Master Lock 6270 Solid Steel Shackleless Round Padlock and 770 Security Hasp Padlock 2-7/8 round body Available cylinders: W6000 5-pin, W7000 6-pin, AM W600A 5-pin,
WindowAndDoorParts.US
Knob/Push Pull Latch Sets Tulip Knob Latch, Single Hole 17-52 Aluminum Installs in single hole bore 1-1/4" diameter. Tulip Knob Latch 17-59 17-60 Aluminum Tulip Knob Latch "No Lock Out" Feature 17-61 Aluminum
New RAPID Ship Inventory
New RAPID Ship Inventory Reduce Transit Time & Shipping Cost By Location January 2019 IDC West or IDC East Warehouse West Warehouse Territory East Warehouse Territory West Warehouse: Anaheim, CA 800-544-4422
ASSEMBLY INSTRUCTIONS DIY WALL BED KIT QUEEN BI FOLD DOOR CABINET & MECHANISM. Tools Required For Assembly. 6.5mm Masonry Drill Bit
ASSEMBLY INSTRUCTIONS DIY WALL BED KIT QUEEN BI FOLD DOOR CABINET & MECHANISM Tools Required For Assembly No 2 & No 4 Phillips Head Screwdrivers No 2 Slot Head Screwdriver Hammer Electric Drill (Hammer
EcoGlide Sliding Door System
SOLUTIONS FOR TRADE EcoGlide Sliding Door System November 2017 SOLUTIONS FOR TRADE CONTENTS Page 4 Page 5 Page 6-20 2100 Series Floor Guided Sliding Door System 3100 Series Wall Guided Sliding Door System
AFTER SELECTING THE PRODUCT YOU REQUIRE, PLEASE ADD THE FOLLOWING: 4. CAM DETAILS... SEE AND PRODUCT DATA SHEET FOR DETAILS
Furniture Locks Specifying a product when ordering AFTER SELECTING THE PRODUCT YOU REQUIRE, PLEASE ADD THE FOLLOWING: 1. REMOVABLE BARREL SYSTEM.. PAGES 4.10-4.49 2. FIXED BARREL PRODUCTS... PAGES 4.50-4.99
Floor Stops - Dome. FS13 Dome Stop. FS17 Dome Stop. R14 Riser. Features:
Floor Stops - Dome FS13 Dome Stop Standard FS13 for use where no threshold is used. Heavy-Duty Cast Dome Stops constructed of brass. Unique riser design of R14 (below) allows easy conversion to threshold
Cabinet Rim lock, Push Button type, - 25 mm backset Page 2-3
Izerwaren Order numbers 25.191. Cabinet Rim lock, Push Button type, - 25 mm backset Page 2-3 Cabinet Rim lock, backset 25 mm - 1 Minimum door thickness 19 mm ~3/4 Strike plate not included with lock Both
A-LOOK ver 1 A-LOOK TM. Installation Manual
A-LOOK ver 1 A-LOOK TM Installation Manual Tools Required Pencil Measuring Tape Drill Hack Saw with 12D/32T Blade Jigsaw Self-Centering Punch Framing Square 7/16" Wrench Ladder 2" or 3" Paint Brush for
Section D ACCELERATOR
Section D ACCELERATOR December 2009 1D Index 1. 47-021476-001 Ball Accelerator Box 2. 11-051019-001 Hex Hd. Cap Screw (10 mm x 25 mm) 3. 11-052018-001 Flat Washer (10.5 mm) 4. 47-021249-004 Ball Cushion
Versatrac Bypass Door Units, Conventional and Top Track, 300 and 400 Series
Versatrac Bypass Door Units, Conventional and Top Track, 300 and 400 Series TM Rough opening width (finished opening width plus 9/16") Notch for top track units (used as frame header) Rough opening height
PHONE: FAX:
Models: SB-12600, SB-12600C, SB-12601, SB-12680, SB-126801, SB-12682, SB-12683, SB-12720, SB-12720C, SB-12760 1... BI-32018... Paper Bag, type SUB-3, 3 pack 2... BI-5554431... Handle Tube, w/ grip 2...
INDEX : SABS MORTICE LOCKSETS : SABS MORTICE LOCKBODY LOCKS AND LOCKSETS
LOCKS AND LOCKSETS LOCKSETS HANDLES CYLINDER LOCKS HANDLE & CYLINDER LOCKS ENTRANCE LOCK SETS LOCKS HINGES INDEX : SABS MORTICE LOCKSETS : SABS MORTICE LOCKBODY : ALUMINIUM LOCKSET : ALUMINIUM CYLINDER