UP139 CRUISE-A-LONG (STANDARD) NATURAL COATED DECK COATED RAMP DESCRIPTION SQUIRREL PANEL BACK WALL CLEAR BUBBLE CRUISE RAIL SQUARE SPIRAL WHEEL 90 AN

Size: px
Start display at page:

Download "UP139 CRUISE-A-LONG (STANDARD) NATURAL COATED DECK COATED RAMP DESCRIPTION SQUIRREL PANEL BACK WALL CLEAR BUBBLE CRUISE RAIL SQUARE SPIRAL WHEEL 90 AN"

Transcription

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17 UP39 CRUISE-A-LONG (STANDARD) NATURAL COATED DECK COATED RAMP DESCRIPTION SQUIRREL PANEL BACK WALL CLEAR BUBBLE CRUISE RAIL SQUARE SPIRAL WHEEL 90 ANGLE BRACKET TUBE BRACKET TUBE WARNING LABEL PLATE HARDWARE COMPLETE 3/8" x 3/4" CARRIAGE BOLT 3/8" x 3/4" P.B.H.C.S. w/patch 3/8" x " P.B.H.C.S. w/patch Parts List 3/8" x 3/4" P.B.H.C.S. w/patch 3/8" x /4" P.B.H.C.S. w/patch 3/8" x 3/4" P.B.H.C.S. w/patch 3/8" x 3 /4" P.B.H.C.S. w/patch 3/8" HEX NUT 3/8" FLAT WASHER ( /4" O.D.) 3/8" BARREL NUT 3/8" FLAT WASHER /" I.D. BRONZE BUSHING LARGE GEAR SMALL GEAR #4 x /" PAN HEAD SCREW 6-3 MONTH WARNING LABEL 3/8" PIN-IN TORX BIT TT-4 3/8" PIN-IN TORX KEY-TT-4 QTY PART NUMBER ** ** ** 40309** ** * 80* 800* 804* 806* 808* 8060* 80403* 8744* * 8740* 080* 40309* 4030* * 4034* 86* 868* Unless Otherwise Specified, All Units of Measure are Each *Items listed below Hardware Complete line are included with Hardware Complete Number **Included in HDPE package Warning: During Installation, Hardware And Small Parts Are Choking Hazards For Young Children. Store Unused Parts Appropriately Until Assembly Is Completed. Once Assembly Is Completed, Remove Any Unused Parts From The Play Environment And Dispose/Save Them In A Secure Location. Any bolt end protruding more than two full threads beyond the face of the nut causes risk of clothing entanglement. Promptly cut-off flush, file smooth, and treat to prevent corrosion. UP39 used with UP40 In-Ground Package or UP4 Surface Mount Package. (Both Sold Seperately) Issued/Revised: 0/8/

18 UP39 CRUISE-A-LONG (STANDARD) NATURAL SPECIFICATIONS: HDPE Panels: Panels shall be precision cut from a single solid sheet of.70" thick UV-stabilized extruded high-density polyethylene with colors molded in. The material will have a density of 60 lbs/ft³ and a tensile strength of 4400 PSI (30 Mpa) as determined per procedure C of ASTM D98. All edges shall have radiuses and all corners rounded for safe play. Cruise Rail: Shall be -/6" O.D. x gauge (.07" thick) galvanized steel tubing and shall be coated after fabrication with a custom formula of TGIC polyester powder coating. Bubble: Shall be 6" O.D. x /4" thick transparent polycarbonate. Tube:.87" ID x 3" OD x /6" wall clear polycarbonate tube Coated Steps, Deck & Ramp: Shall be ga (.0 ) Sheets P & O and plastisol-coated. Each part is chemically washed and completely submerged in a special heat-activated primer and allowed to dry. Parts are then pre-heated and immersed in liquid polyvinyl-chloride (plastisol). The PVC coating shall have a typical thickness of.080" to.0", and a hardness of Shore A 83 +/- normal durometer range. This material is classed as "Self Extinguishing", meets or exceeds automotive specifications NVSS30, and contains ultraviolet inhibitors to help prolong the life of the coating. Standard color is brown, with optional colors available. The following characteristics apply: Tensile Strength -,800 psi Elongation - 90 % Tear Strength - 40 lbs/in 90 Angle Bracket: Shall be 3/6" x " Hot Rolled Steel. 90 Degree Angle Bracket will have baked on polyester powder-coated finish after fabrication. Hardware: All nuts, bolts, screws, inserts, and lockwashers used in the assembly of all play equipment shall be stainless steel, yellow dichromate plated steel, blue-coat plated steel, mechanically galvanized or powder coated/yellow dichromate plated steel. All primary fasteners shall be 304 alloy stainless steel. Fasteners with yellow dichromate treatment have an electro-deposited, 99.9% pure zinc substrate applied from a specially formulated solution sealed with a yellow dichromate top coat designed to work in conjunction with the zinc plating. Yellow dichromate has a 30% longer life to white corrosion and 7% longer to red corrosion than does hot-dip galvanizing. Stainless steel fasteners shall be button pin-in head, hex socket cap screws with a two-part epoxy locking patch added to the threads. The two-part locking patch shall consist of one part resin and one part catalyst which are activated during installation. After curing, the material shall require a minimum of five times the installation torque to remove the fastener. Manufacturer shall provide special installation tools for pinned fasteners Issued/Revised: 0/8/

19 UP39 CRUISE-A-LONG (STANDARD) NATURAL SQUIRREL PANEL COATED DECK (403097) SPIRAL WHEEL CLEAR BUBBLE ANGLE BRACKET TUBE BACK WALL TUBE BRACKET COATED RAMP (403096) SMALL GEAR 4030 LARGE GEAR SMALL GEAR WARNING LABEL PLATE 403 CRUISE RAIL (40309) CLEAR BUBBLE SQUARE FINISHED ASSEMBLY Issued/Revised: 0/8/

20 0 INCH 6 0 CM UP39 CRUISE-A-LONG (STANDARD) NATURAL STEP. Make sure on Coated Deck and Coated Ramp that all holes are clear of plastisol coating.. Attach Deck to Ramp using 3/8" x " P.B.H.C.S. w/patch, 3/8" Flat Washer ( /4" O.D.), and 3/8" Hex Nut. See Detail 03. 3/8" HEX NUT /8" FLAT WASHER ( /4" O.D.) /8" FLAT WASHER ( /4" O.D.) 8744 COATED DECK COATED RAMP 03 3/8" x " P.B.H.C.S. w/patch 800 COATED RAMP (403096) COATED DECK (403097) 03 Issued/Revised: 0/8/ UNDERNEATH VIEW

21 0 INCH 6 0 CM UP39 CRUISE-A-LONG (STANDARD) NATURAL STEP. Attach assembled Deck and Ramp to Front Wall and Back Wall using 3/8" x 3/4" P.B.H.C.S. w/patch, 3/8" Flat Washer, 3/8" Flat Washer ( /4" O.D.), and 3/8" Hex Nut. See Detail 033. NOTE: IF INSTALLING IN-GROUND OR SURFACE MOUNT PACKAGES REFER TO UP40 OR UP4 INSTALLATION SHEETS NOW. 3/8" HEX NUT COATED PART 3/8" FLAT WASHER /8" FLAT WASHER ( /4" O.D.) /8" x 3/4" P.B.H.C.S. w/patch 804 WALL PANEL 033 BACK WALL COATED RAMP (403096) COATED DECK (403097) SQUIRREL PANEL Issued/Revised: 0/8/

22 0 INCH 6 0 CM UP39 CRUISE-A-LONG (STANDARD) NATURAL STEP 3. Attach Clear Bubble to Back Wall using 3/8" x 3/4" P.B.H.C.S. w/patch, 3/8" Flat Washer, and 3/8 Barrel Nut. See Detail 0.. Attach Cruise Rail to Back Wall using 3/8" x 3/4" P.B.H.C.S. w/patch and 3/8" Flat Washer. See Detail 06. 3/8" BARREL NUT CLEAR BUBBLE CRUISE RAIL BACK WALL 0 3/8" FLAT WASHER /8" x 3/4" P.B.H.C.S. w/patch 80 BACK WALL 06 3/8" FLAT WASHER /8" x 3/4" P.B.H.C.S. w/patch 804 BACK WALL SQUIRREL PANEL CRUISE RAIL (40309) 0 CLEAR BUBBLE Issued/Revised: 0/8/

23 0 INCH 6 0 CM UP39 CRUISE-A-LONG (STANDARD) NATURAL STEP 4. Attach Small and Large Gears to Back Wall using 3/8" x 3 /4" P.B.H.C.S. w/patch, 3/8" Flat Washer, and 3/8 Barrel Nut. See Detail 07.. Attach Square to Back Wall using 3/8" x 3/4" P.B.H.C.S. w/patch, 3/8" Flat Washer, /" I.D. Bronze Bushing, and 3/8 Barrel Nut. See Detail 08. 3/8" BARREL NUT /8" FLAT WASHER /8" BARREL NUT /8" FLAT WASHER 8740 PANEL PANEL 3/8" FLAT WASHER 8740 SQUARE /" I.D. BRONZE BUSHING 080 3/8" FLAT WASHER GEAR 3/8" x 3 /4" P.B.H.C.S. w/patch SQUARE 3/8" x 3/4" P.B.H.C.S. w/patch 808 SMALL GEAR 4030 LARGE GEAR SMALL GEAR 4030 SQUIRREL PANEL BACK WALL SQUARE Issued/Revised: 0/8/

24 0 INCH 6 0 CM UP39 CRUISE-A-LONG (STANDARD) NATURAL STEP. Attach Spiral Wheel to Front Wall using 3/8" x /4" P.B.H.C.S. w/patch, 3/8" Flat Washer, /" I.D. Bronze Bushing, and 3/8 Barrel Nut. See Detail 09.. Attach Clear Bubble to Back Wall using 3/8" x " P.B.H.C.S. w/patch, 3/8" Flat Washer, and 3/8 Barrel Nut. See Detail 0. 3/8" BARREL NUT /" I.D. BRONZE BUSHING 080 3/8" BARREL NUT CLEAR BUBBLE SPIRAL WHEEL SPIRAL WHEEL BACK WALL 3/8" x 3/4" P.B.H.C.S. w/patch 80 PANEL 09 3/8" FLAT WASHER /8" x /4" P.B.H.C.S. w/patch /8" FLAT WASHER 8740 SQUIRREL PANEL BACK WALL CLEAR BUBBLE SPIRAL WHEEL Issued/Revised: 0/8/

25 0 INCH 6 0 CM UP39 CRUISE-A-LONG (STANDARD) NATURAL STEP 6. Place Tube Brackets over ends of Tube. See Detail 03. Attach Tube Brackets to 90 Angle Bracket using 3/8" x 3/4" Carriage Bolt and 3/8 Barrel Nut. See Detail Attach 90 Angle Brackets to Squirrel Panel using 3/8 x 3/4 Carriage Bolt and 3/8 Barrel Nut. See Detail Plumb and level the entire assembly and tighten all fasteners. 3/8" x 3/4" CARRIAGE BOLT ANGLE BRACKET 3/8" BARREL NUT PANEL 3/8" x 3/4" CARRIAGE BOLT 800 TUBE TUBE BRACKET 03 3/8" BARREL NUT ANGLE BRACKET TUBE TUBE BRACKET TUBE BRACKET 4037 SQUIRREL PANEL TUBE ANGLE BRACKET Issued/Revised: 0/8/

26 0 INCH 6 0 CM UP39 CRUISE-A-LONG (STANDARD) NATURAL STEP 7. Attach 6-3 Month Warning Label to Warning Label Plate. See Detail 04.. Attach Warning Label Plate to Back Wall using #4 x / Pan Head Screw. See Detail 04. Refer to view for location. PANEL 6-3 MONTH WARNING LABEL 4034 WARNING LABEL PLATE 403 #4 x /" PAN HEAD SCREW in [7.78 cm] WARNING LABEL PLATE 403 in [.08 cm] 6-3 MONTH WARNING LABEL Issued/Revised: 0/8/

UP133 CRAWL & TODDLE (STANDARD) NATURAL COATED DECK COATED RAMP FRONT WALL BACK WALL DESCRIPTION COATED STEPS 90 ANGLE BRACKET LEFT WALL RIGHT WALL CL

UP133 CRAWL & TODDLE (STANDARD) NATURAL COATED DECK COATED RAMP FRONT WALL BACK WALL DESCRIPTION COATED STEPS 90 ANGLE BRACKET LEFT WALL RIGHT WALL CL UP33 CRAWL & TODDLE (STANDARD) NATURAL COATED DECK COATED RAMP FRONT WALL BACK WALL DESCRIPTION COATED STEPS 90 ANGLE BRACKET LEFT WALL RIGHT WALL CLEAR BUBBLE CRUISE RAIL SQUARE SPIRAL WHEEL TRIANGLE

More information

UP43 LEARN-A-L0T (NATURAL) Parts List DESCRIPTION 90 ANGLE BRACKET DOOR WINDOW MUSIC CATERPILLAR CIRCLE FRAME CIRCLE MIRROR YELLOW STAINED GLASS RED STAINED GLASS SQUARE TRIANGLE SPIRAL WHEEL SQUARE MIRROR

More information

UP4 LEARN-A-LOT (PLAYFUL) Parts List DESCRIPTION 90 ANGLE BRACKET DOOR WINDOW MUSIC CATERPILLAR CIRCLE FRAME CIRCLE MIRROR YELLOW STAINED GLASS RED STAINED GLASS SQUARE TRIANGLE SPIRAL WHEEL SQUARE MIRROR

More information

Next Level Security. This 2-tier locker ships flat to save on freight, comes in galvanized and powder coat finish options, and has a modular design.

Next Level Security. This 2-tier locker ships flat to save on freight, comes in galvanized and powder coat finish options, and has a modular design. T WO - T I E R B IK E LO C K E R Next Level Security We take long-term bicycle storage to new heights with the new Dero Two-Tier Bike Locker. It is easy to load and provides a space-saving solution to

More information

SECTION SITE FURNISHINGS FOR CFCRT. 1. American Society for Testing and Materials (ASTM).

SECTION SITE FURNISHINGS FOR CFCRT. 1. American Society for Testing and Materials (ASTM). PART 1 - GENERAL 1.1 SECTION INCLUDES A. Benches. B. Trash receptacles. C. Bike storage. 1.2 REFERENCE STANDARDS A. Including but not limited to: 1. American Society for Testing and Materials (ASTM). 1.3

More information

Bike Locker Model DBL1 & DBL2

Bike Locker Model DBL1 & DBL2 Bike Locker Model DBL1 & DBL2 DBL1 & DBL2 are constructed of 99% recycled steel and is available in 20 standard powder coat colors or a galvanized finish. DBL1 & DBL2 store 1 or 2 bikes effortlessly and

More information

Fastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength

Fastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength Fastener Basics Common Fastener Types Fastener Grade (US) or Class (metric) refers to the mechanical properties of the fastener material. Generally, a higher number indicates a stronger, more hardened

More information

Rear Mount Installation Instructions

Rear Mount Installation Instructions Rear Mount Installation Instructions Ford Transit Low Roof 130 WB Frame Kit Part #: DTC 0809-011 V1.0.10.12.18 IMPORTANT INSTALLATION STEPS ARE DENOTED USING A STOP SIGN. THESE STEPS MUST BE PERFORMED

More information

Spiral Slide

Spiral Slide IMPORTANT Page 1 PLEASE READ THESE INSTRUCTIONS BEFORE COMMENCING ASSEMBLY. All equipment must be installed in accordance with these instructions. Check your shipment against Bill of Lading and Parts list.

More information

5/16" Flange nut. Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc plated bolt w/ washers and nut. Anchor 3" sq. 7 Ga.

5/16 Flange nut. Bolt Keeper Plate (8 Sq. SYS.) (3) 1/2 x 3 Hex head connector zinc plated bolt w/ washers and nut. Anchor 3 sq. 7 Ga. 2 1/2" x 2 1/2" x 10 Ga. 6" 5" 4" Variable Slipbase (8" Sq. SYS.) 5/16 Corner Bolt W/ nut 5/16" Flange nut Stub Insert (8" Sq. SYS.) Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc

More information

S W E RV E RAC K. Simple Security. Simple Stability.

S W E RV E RAC K. Simple Security. Simple Stability. S W E RV E RAC K Simple Security. Simple Stability. The Swerve Rack is a proven design that provides high security and easy bike parking. The Swerve Rack uses thick pipe construction and the full radius

More information

Fortress Fe Posts must always be secured to the deck framing. Fortress Fe Posts should never be attached to only the deck boards.

Fortress Fe Posts must always be secured to the deck framing. Fortress Fe Posts should never be attached to only the deck boards. Installation Instructions for Fortress Horizontal Cable Panel System with UB-05 Brackets and Fe Posts It is the responsibility of the installer to meet all code and safety requirements, and to obtain all

More information

CYCL E STAT IO N. High Capacity

CYCL E STAT IO N. High Capacity CYCL E STAT IO N High Capacity The Dero Cycle Station provides high-capacity, covered bike parking for bicycle commuters. With a high roof and open platform, the Dero Cycle Station allows bike corrals,

More information

Swerve Rack CUSTOM RACKS AVAILABLE

Swerve Rack CUSTOM RACKS AVAILABLE CUSTOM RACKS AVAILABLE Swerve Rack The design of the Swerve mirrors the bike frame, thus providing superior bike support while making it easy to secure both the bike frame and wheel with a standard u-lock.

More information

H O O P RAC K. Simple Security

H O O P RAC K. Simple Security H O O P RAC K Simple Security The Hoop Rack is a proven design that provides high security and easy bike parking. The Hoop Rack uses thick pipe construction and the full radius of the bend makes the Hoop

More information

ULT R A S PACE SAV E R SQ UA R E D

ULT R A S PACE SAV E R SQ UA R E D ULT R A S PACE SAV E R SQ UA R E D Hip to be Square Dero s Ultra Space Saver Squared offers high-security, vertical bike parking. Adjustable sliding arms make it easy for customers to best utilize their

More information

RELINER INSIDE DROP SYSTEM SPECIFICATIONS

RELINER INSIDE DROP SYSTEM SPECIFICATIONS 1. PRODUCT NAME RELINER INSIDE DROP SYSTEM U.S. Patent 6074130 Canadian Patent # 2269565 All RELINER Products are proudly made in the U.S.A. 2. MANUFACTURER RELINER /Duran Inc. 53 Mount Archer Rd. Lyme

More information

Side DuraRac Installation Instructions

Side DuraRac Installation Instructions Side DuraRac Installation Instructions Ford Transit Low Roof 130 /148 WB Frame Kit Part #: CRC 22-1010-002 V1.0.08.10.18 IMPORTANT INSTALLATION STEPS ARE DENOTED USING A STOP SIGN. THESE STEPS MUST BE

More information

Secure Bike Parking. Patent Pending Dero

Secure Bike Parking. Patent Pending Dero VE LO P O RT Secure Bike Parking The graceful lines and modern laser-cut design makes the Veloport stand out while still offering the security and durability you need in your long-term bike parking. Each

More information

KO LO SH E LT E R. High Capacity and Flexibility

KO LO SH E LT E R. High Capacity and Flexibility KO LO SH E LT E R High Capacity and Flexibility The unique styling of our redesigned Dero Kolo Shelter will help beautify your facility and provide secure, covered bike parking for cyclists. The Kolo is

More information

H HD Adult Wheelchair Swing Frame & Hangers(perm) IMPORTANT

H HD Adult Wheelchair Swing Frame & Hangers(perm) IMPORTANT Page 1 IMPORTANT PLEASE READ THESE INSTRUCTIONS BEFORE COMMENCING ASSEMBLY. All equipment must be installed in accordance with these instructions. Check your shipment against Bill of Lading and Parts list.

More information

DERO BIKE LOCKER 33. Maximum Security

DERO BIKE LOCKER 33. Maximum Security Maximum Security The Dero Bike Locker 33 offers bike parking for a single bicycle per unit, thus providing a narrower footprint when space is limited. This affordable bike locker is a perfect option for

More information

PIPE/CONDUIT SUPPORTS

PIPE/CONDUIT SUPPORTS PIPE/CONDUIT SUPPORTS Pipe/Conduit Clamps...102-105 Unicushion... 106 Pipe & Tubing (Cush-A-Clamp ) Clamps...107-110 Pipe Hangers... 111 Pipe Rollers...111-112 Pipe Brackets... 113 Reference Tables...114-120

More information

Downtown Rack. Custom logo option available

Downtown Rack. Custom logo option available Custom logo option available Downtown Rack The Downtown Rack uses thick, square-tube construction that can t be cut with a pipe cutter. The extended width of the Downtown Rack makes for easy bike parking

More information

Fastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength

Fastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength Fastener Basics Common Fastener Types Fastener Grade (US) or Class (metric) refers to the mechanical properties of the fastener material. Generally, a higher number indicates a stronger, more hardened

More information

Fortress Fe Posts must always be secured to the deck framing. Fortress Fe Posts should never be attached to only the deck boards.

Fortress Fe Posts must always be secured to the deck framing. Fortress Fe Posts should never be attached to only the deck boards. Installation Instructions for FortressCable H-Series Stair Panels with Simplified Stair Bracket SSB-05 and Fe Posts It is the responsibility of the installer to meet all code and safety requirements, and

More information

Fortress Fe Posts must always be secured to the deck framing. Fortress Fe Posts should never be attached to only the deck boards.

Fortress Fe Posts must always be secured to the deck framing. Fortress Fe Posts should never be attached to only the deck boards. Installation Instructions for Fortress Vertical Cable Panel System with Brackets and Fe Posts It is the responsibility of the installer to meet all code and safety requirements, and to obtain all required

More information

Testing. Material testing will be according to applicable AASHTO, ASTM or Department methods as specified.

Testing. Material testing will be according to applicable AASHTO, ASTM or Department methods as specified. 907.01 Section 907. FENCING MATERIALS 907.01 General Requirements. Materials for use in fencing property, right-of-way and other installations must comply with this section. 907.02 Testing. Material testing

More information

Hex Head Bolt Set N - Includes lock nut. Used to connect male and female T connectors. Galvanized. 3/4" x 3-1/2". Standard Grade (f) Part #24279

Hex Head Bolt Set N - Includes lock nut. Used to connect male and female T connectors. Galvanized. 3/4 x 3-1/2. Standard Grade (f) Part #24279 a Standard Grade (3/16 ) and Commercial Grade(1/4 ) Tie Down Is designed for use with 1-1/2" thick lumber (minimum width 6"). All hardware is mounted with 3/8" carriage bolts. All male and female dock

More information

Versai Evolution of Versatile Fencing

Versai Evolution of Versatile Fencing Versai Evolution of Versatile Fencing About Versai Ornamental Fencing Versai Ornamental Fencing Versai Ornamental Fencing by Fortress is the next generation in ornamental fencing. It offers a solution

More information

Hex Cap Screws Coarse & Fine Thread

Hex Cap Screws Coarse & Fine Thread INDUSTRIAL Product Description Hex head cap screws are manufactured to dimensional standards of ASME B18.2.1 and to various material and mechanical standards of ASTM and SAE. The length of a cap screw

More information

ALUMINUM PIPE GUIDERAIL 01/01/

ALUMINUM PIPE GUIDERAIL 01/01/ NOTES PIPE RAILING & POSTS: Structural Tube, Pipe and Bar shall be in accordance with ASTM B22 or ASTM B429, Alloy 606-T6. End Rail 90 bends and corner bends with maximum 4-0" post spacing, may be Alloy

More information

Thank you for purchasing out product! *Please read these instructions and follow them step by step. *

Thank you for purchasing out product! *Please read these instructions and follow them step by step. * Page 1 of 7 AD17 AA DS 4 X 16 T12 Thank you for purchasing out product! *Please read these instructions and follow them step by step. * STEP 1. Slide two support posts (REF. # 24) into the two outside

More information

INSTALLATION GUIDE. C20-FTM STRAIGHT PARTITION Transit Partition ( Perforated Window, No Access, Steel )

INSTALLATION GUIDE. C20-FTM STRAIGHT PARTITION Transit Partition ( Perforated Window, No Access, Steel ) INSTALLATION GUIDE C20-FTM STRAIGHT PARTITION Transit Partition ( Perforated Window, No Access, Steel ) QUICK START GUIDE Phase 1 - Assembly q 1.1 Setup... q 1.1.1 Unpack components; compare with the bill

More information

3/4 Rear DuraRac Installation Instructions

3/4 Rear DuraRac Installation Instructions 3/4 Rear DuraRac Installation Instructions Ford Transit Low Roof 130 WB Frame Kit Part #: CRC 27-1010-001 V1.0.09.28.18 IMPORTANT INSTALLATION STEPS ARE DENOTED USING A STOP SIGN. THESE STEPS MUST BE PERFORMED

More information

TO O L K IT. Public Bike Repair

TO O L K IT. Public Bike Repair TO O L K IT Public Bike Repair The Dero Tool Kit includes all the necessary tools to perform most routine maintenance and adjustments on most bikes. All the tools are securely fastened with stainless steel

More information

TAPPING SCREWS 1-1 TAPPING SCREWS PHILLIPS OVAL. 1 General Fasteners HEAD ZINC BLACK SIZE SIZE CHROME CHROMATE OXIDE

TAPPING SCREWS 1-1 TAPPING SCREWS PHILLIPS OVAL. 1 General Fasteners HEAD ZINC BLACK SIZE SIZE CHROME CHROMATE OXIDE TAPPING SCREWS TAPPING SCREWS PHILLIPS OVAL HEAD ZINC BLACK SIZE SIZE CHROME CHROMATE OXIDE #4 x 3/8"... REG... 110001 #4 x 1/2"... REG... 105030... 110002 #4 x 5/8"... REG... 1 10003 #4 x 3/4"... REG...

More information

Flat Panel Stand FPZ-655. for 32" to 55" Flat Panel Screens FEATURES. Reinforced universal adapter plate for a strong hold

Flat Panel Stand FPZ-655. for 32 to 55 Flat Panel Screens FEATURES. Reinforced universal adapter plate for a strong hold FPZ-655 Flat Panel Stand for 32" to 55" Flat Panel Screens For a viewing experience that really stands out, Peerless FPZ-655 Universal Flat Panel Stand for 32" 55" flat panel TVs provides a brilliant combination

More information

Fortress Fe Posts must always be secured to the deck framing. Fortress Fe Posts should never be attached to only the deck boards.

Fortress Fe Posts must always be secured to the deck framing. Fortress Fe Posts should never be attached to only the deck boards. Installation Instructions for FortressCable H-Series Cable Panel System With UB-05 Brackets and Fe Posts It is the responsibility of the installer to meet all code and safety requirements, and to obtain

More information

PLAY HOUSE IMPORTANT

PLAY HOUSE IMPORTANT IMPORTANT Page 1 PLEASE READ THESE INSTRUCTIONS BEFORE COMMENCING ASSEMBLY. All equipment must be installed in accordance with these instructions. Check your shipment against Bill of Lading and Parts list.

More information

1.1 SUMMARY. A. This Section includes the following: 1. Loose steel lintels. 2. Shelf angles. 3. Metal floor plate. 4. Pipe bollards.

1.1 SUMMARY. A. This Section includes the following: 1. Loose steel lintels. 2. Shelf angles. 3. Metal floor plate. 4. Pipe bollards. PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Loose steel lintels. 2. Shelf angles. 3. Metal floor plate. 4. Pipe bollards. B. See Division 5 Section "Pipe and Tube Railings"

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS R5 STEP BOARD APPLICATION: 2009-2017 Dodge Ram 1500 Quad / Crew Cab 2010-2017 Dodge Ram 2500/3500 Crew Cab PART NUMBER: 28-51040, 28-51045, 28-51050, 28-51055 ITEM QUANTITY DESCRIPTION

More information

Salter Industries Spiral Stair

Salter Industries Spiral Stair Salter Industries Spiral Stair The Leader in Spiral Staircases Continuous Sleeve Stair Installation Instructions TOOLS NEEDED: 1. Electric drill with hex chuck and Phillips bit 2. Drill bits 1/8", 1/4",

More information

Side Katerack Installation Instructions

Side Katerack Installation Instructions Side Katerack Installation Instructions Ram ProMaster City 2015+ Frame Kit Part #: CRC 28-1000-001 V1.0.12.06.18 IMPORTANT INSTALLATION STEPS ARE DENOTED USING A STOP SIGN. THESE STEPS MUST BE PERFORMED

More information

SECTION MASONRY ANCHORAGE AND REINFORCEMENT. Display hidden notes to specifier. (Don't know how? Click Here)

SECTION MASONRY ANCHORAGE AND REINFORCEMENT. Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 04080 MASONRY ANCHORAGE AND REINFORCEMENT Display hidden notes to specifier. (Don't know how? Click Here) A. Post installed masonry anchors. B. Miscellaneous

More information

MTS-SP100. RENOGY Pole Mount System E Philadelphia St, Ontario, CA Version: 1.2

MTS-SP100. RENOGY Pole Mount System E Philadelphia St, Ontario, CA Version: 1.2 MTS-SP100 RENOGY Pole Mount System 2775 E Philadelphia St, Ontario, CA 91761 1-800-330-8678 1 Version: 1.2 Important Safety Instructions Please save these instructions. This manual contains important safety,

More information

TENANT IMPROVEMENT 16 FEBRUARY WEST 27TH STREET, 4TH FLOOR 100% CD OWNER/BID ADD 1-03/08/2018

TENANT IMPROVEMENT 16 FEBRUARY WEST 27TH STREET, 4TH FLOOR 100% CD OWNER/BID ADD 1-03/08/2018 SECTION 055000 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply

More information

STEEL PIPE GUIDERAIL 01/01/

STEEL PIPE GUIDERAIL 01/01/ NOTES PIPE RAILING & POSTS: Pipe Rails and s shall be in accordance with ASTM A5 Grade B for standard weight pipe and ASTM A500 Grade B, C or D or ASTM A50 for structural tube. Bars for handrail supports

More information

Rear Katerack Installation Instructions

Rear Katerack Installation Instructions Rear Katerack Installation Instructions Ram Promaster City 2015+ Frame Kit Part #: CRC 26-1000-001 V1.0.12.04.18 IMPORTANT INSTALLATION STEPS ARE DENOTED USING A STOP SIGN. THESE STEPS MUST BE PERFORMED

More information

H O O P RAC K. Simple Security

H O O P RAC K. Simple Security H O O P RAC K Simple Security The Hoop Rack is a proven design that provides high security and easy bike parking. The Hoop Rack uses thick pipe construction and the full radius of the bend makes the Hoop

More information

WARNING. Failure to observe these instructions could lead to severe injury or death.

WARNING. Failure to observe these instructions could lead to severe injury or death. INSTALLATION INSTRUCTIONS WINCH MOUNTING KIT Part Number: 80156, 80160 Application: 2008 Ford F150 Your safety, and the safety of others, is very important. To help you make informed decisions about safety,

More information

CONTROLS KIT FOR ALL # & # HARLEY DAVIDSON SPORTSTER MODELS

CONTROLS KIT FOR ALL # & # HARLEY DAVIDSON SPORTSTER MODELS INSTALLATION INSTRUCTIONS TC BROS. CHOPPERS PART #0-0075 & #0-0076 (No Pegs) FORWARD CONTROLS KIT FOR ALL 00-0 HARLEY DAVIDSON SPORTSTER MODELS If downloading & printing these instructions online, be sure

More information

INSTALLATION GUIDE. C20-DH STRAIGHT PARTITION Sprinter Partition ( Perforated Window, No Access, Steel )

INSTALLATION GUIDE. C20-DH STRAIGHT PARTITION Sprinter Partition ( Perforated Window, No Access, Steel ) INSTALLATION GUIDE C20-DH STRAIGHT PARTITION Sprinter Partition ( Perforated Window, No Access, Steel ) QUICK START GUIDE Phase 1 - Assembly q 1.1 Setup... q 1.2 Partition assembly... 3-4 5-6 Phase 2 -

More information

ULT R A SPAC E SAV E R

ULT R A SPAC E SAV E R ULT R A SPAC E SAV E R Double Capacity, Modular Construction The Ultra Space Saver provides easy and ample space for u-lock security on nearly any bike, including bikes with fenders. Thanks to design enhancements,

More information

Depending on the size you ordered you will have either 5 Foot sections which will build the 10 Foot frame or 6 Foot sections which will build the 12

Depending on the size you ordered you will have either 5 Foot sections which will build the 10 Foot frame or 6 Foot sections which will build the 12 XL Quilting Frame 1 Depending on the size you ordered you will have either 5 Foot sections which will build the 10 Foot frame or 6 Foot sections which will build the 12 Foot frame Printed 2 June 2014 Updated

More information

TREX POST MOUNT DECKING AND CONCRETE

TREX POST MOUNT DECKING AND CONCRETE TREX POST MOUNT DECKING AND CONCRETE for Pressure-treated Wood Framing LOCATION AND INSTALLATION OF POST MOUNTS IMPORTANT NOTES:» EACH POST MUST BE ATTACHED AS SHOWN TO ENSURE A CODE COMPLIANT AND SAFE

More information

Engineering Test Report

Engineering Test Report Engineering Test Report Thermal Diffusion Galvanizing Report Poleline Hardware 02/01/2018 Allied Bolt s Thermal Diffusion Galvanizing Allied Bolt announces the launch of Thermal Diffusion Galvanized Poleline

More information

Parts list Instruction guide Warnings Please read carefully before assembling and using product.

Parts list Instruction guide Warnings Please read carefully before assembling and using product. Parts list Instruction guide Warnings Please read carefully before assembling and using product. Jet Rail XL Part Number 27377 Tools required for assembly Hammer 9/16 Wrench 3/4 Wrench Ratchet 9/16 Socket

More information

Authority22 Transition Roller for Existing Machines

Authority22 Transition Roller for Existing Machines Authority22 Transition Roller for Existing Machines Upgrade Packaging 1 per Authority22 14-860241-000 Package Transition Roller Upgrade Kit NOTE: Due to installation requirements, the parts will be packaged

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Trans4mer Gen II Mount System For 2011-2012 Dodge Ram HD 4500/5500 Bracket Kit 90160 Your safety, and the safety of others, is very important. To help you make informed decisions

More information

INSTALLATION INSTRUCTIONS UTV LIGHT BAR KIT Part Number: and Application: All UTV s*

INSTALLATION INSTRUCTIONS UTV LIGHT BAR KIT Part Number: and Application: All UTV s* INSTALLATION INSTRUCTIONS UTV LIGHT BAR KIT Part Number: 83970 and 84360 Application: All UTV s* * does not include Arctic Cat vehicles Your safety, and the safety of others, is very important. To help

More information

Installation Instructions/Operation and Maintenance Manual. PS DOORS Contact Information. Website psdoors.com

Installation Instructions/Operation and Maintenance Manual. PS DOORS Contact Information. Website psdoors.com Ladder Safety Gate Installation Instructions/Operation and Maintenance Manual Models All Models: LSG-5 to LSG-48 Table of Contents Product Information...2 Inspection & Mainteance...2 Warranty Information...2

More information

Enclosed Partition Installation Instructions

Enclosed Partition Installation Instructions Nissan NV1500/2500/3500 High Roof Partition Kit Part #: DTC 1502-036 V1.0.08.06.18 IMPORTANT INSTALLATION STEPS ARE DENOTED USING A STOP SIGN. THESE STEPS MUST BE PERFORMED IN THE SPECIFIED ORDER TO ENSURE

More information

INSTITUTIONAL LIFEGUARD STAND

INSTITUTIONAL LIFEGUARD STAND INSTITUTIONAL LIFEGUARD STAND ASSEMBLY INSTRUCTIONS CORPORATE HEADQUARTERS WESTERN SALES AND MANUFACTURING PLANT P.O. Box 400 1017 SW Berg Parkway Canby, Oregon 97013 (503) 266-2231 Fax (503) 266-4334

More information

POLE LINE HARDWARE POLE LINE HARDWARE. HI-LINE UTILITY SUPPLY CO. Phone: Fax:

POLE LINE HARDWARE POLE LINE HARDWARE. HI-LINE UTILITY SUPPLY CO. Phone: Fax: 146 MACHINE BOLTS w/ square nut Rolled threads; s six inches or longer have con-type points. Hot dip galvanized. 860412 3/8" 4.5" 3" 250 8706 6" 3" 100 8707 7" 3" 100 8708 1/2" 8" 4" 100 8710 10" 4" 50

More information

Sheet Steel Facts. Most common head design for self-drilling, self-tapping screws.

Sheet Steel Facts. Most common head design for self-drilling, self-tapping screws. Sheet Steel Facts Fastener Guide for Sheet Steel Building Products August, 2003 Fastener Materials Fasteners are manufactured from several materials and coatings. For the purpose of this fact sheet, the

More information

AIR KIT 3. Heavy-Duty Public Bike Pump

AIR KIT 3. Heavy-Duty Public Bike Pump Heavy-Duty Public Bike Pump The Air Kit 3 is designed for heavy-duty, repeated public use. The waterproof gauge and burly construction mean that this pump will continue to work long after others have failed.

More information

NAVSEA STANDARD ITEM

NAVSEA STANDARD ITEM NAVSEA STANDARD ITEM FY-19 DATE: 01 OCT 2017 CATEGORY: I 1. SCOPE: 1.1 Title: Threaded Fastener Requirements; accomplish 2. REFERENCES: 2.1 Standard Items 2.2 S9086-CJ-STM-010/075, Fasteners 3. REQUIREMENTS:

More information

New Product Release: October 2014 Boone Racks

New Product Release: October 2014 Boone Racks New Product Release: October 2014 Boone Racks Double Fido Fountain Mounting: Surface NOTE: THESE ROUGH-IN DIMENSIONS MAY VARY ½: (13 mm) PLUS OR MINUS NOTE: All dimensions subject to manufacturing variance

More information

MANUFACTURING INC. Specifications

MANUFACTURING INC. Specifications Page 1 of 4 GENERAL 11 Aluminum security screen doors must be tested by a recognized testing laboratory to conform to SMA 6001-2002 Proposed American National Standard Specifications for Metal Protection

More information

PART MATERIALS. Section Fencing Materials. Description

PART MATERIALS. Section Fencing Materials. Description PART 03000 - MATERIALS Section 03010 - Fencing Materials Description 03010.00 Scope - This section consists of the test requirements, specifications and tolerances for barbed wire, woven wire and chain

More information

S48-L12-SC AND G48-L12-GC STEEL PORTA-DOCK S82 SC 6 X 12 PLATFORM AND G82 GC 6 X 12 PLATFORM

S48-L12-SC AND G48-L12-GC STEEL PORTA-DOCK S82 SC 6 X 12 PLATFORM AND G82 GC 6 X 12 PLATFORM PAGE 1 OF 6 PORTA-DOCK, INC. S48-L12-SC AND G48-L12-GC STEEL PORTA-DOCK S82 SC 6 X 12 PLATFORM AND G82 GC 6 X 12 PLATFORM Thank you for purchasing our product! *Please read these instructions and follow

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Trans4mer Winch Mount For 2007-2010 Chevrolet Silverado HD and GMC Sierra HD Bracket Kit 90140 Your safety, and the safety of others, is very important. To help you make informed

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Trans4mer Grille Guard/Winch Mount For 2007 Chevrolet Silverado 1500 and GMC Sierra 1500 Kit 75230 (Black) and 76007 (Stainless) Your safety, and the safety of others, is very

More information

ROUND STEEL POLE STRAIGHT

ROUND STEEL POLE STRAIGHT PROJECT NAME: CATALOG NUMBER: NOTES: FIXTURE SCHEDULE: Page: 1 of 7 ROUND STEEL POLE SPECIFICATIONS: Pole Shaft The pole shaft is fabricated from hot rolled steel tubing of onepiece construction with a

More information

SECTION METAL FABRICATIONS

SECTION METAL FABRICATIONS SECTION 05100 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for metal fabrications, including minimum requirements for fabricator, and galvanizing. 1.02 REFERENCE STANDARDS A. ASTM

More information

SECTION CONCRETE ANCHORING. Display hidden notes to specifier. (Don't know how? Click Here)

SECTION CONCRETE ANCHORING. Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 03 15 00 CONCRETE ANCHORING Display hidden notes to specifier. (Don't know how? Click Here) A. General purpose mechanical anchors for horizontal and vertical

More information

Installation Manual Flat Track Series

Installation Manual Flat Track Series Manual Flat Track Series Contents Safety...1 Parts...2 Hardware.......................................... 2 Tools Required..................................... 4.............................................

More information

Mechanical System Specifications & Detail Drawings

Mechanical System Specifications & Detail Drawings Mechanical System & Detail Drawings 1-888-989-1370 www.lundiausa.com RECOM GROUP INC. 449 Borrego Court San Dimas, CA 91773 Phone: (909) 599-1370 Fax: (909) 599-2291 MECHANICAL SYSTEM SPECIFICATIONS All

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS SPORTSMAN WINCH MOUNT GRILLE GUARD APPLICATION: 2016-2018 Toyota Tacoma PART NUMBER: 40-93885, 45-93880, 46-23885 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 1 WINCH TRAY 15MM SOCKET

More information

01 FASTENERS JULY FASTENERS 1

01 FASTENERS JULY FASTENERS 1 01 FASTENERS 4 Bolts 22 Socket Screws 30 Nuts 39 Washers 53 Screws 72 Threaded Rods & Studs 73 Rivets, Rivnuts & Accessories 82 Retaining Rings 84 Pins, Links, & Sleeves 91 Key Stock & Assortments 90 Anchors

More information

Leveling Feet, Base Plates and Casters

Leveling Feet, Base Plates and Casters Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.

More information

WARNING Indicates a hazardous situation which, if not avoided, could result in death or serious injury. WARNING. Ranger XP Door Kit

WARNING Indicates a hazardous situation which, if not avoided, could result in death or serious injury. WARNING. Ranger XP Door Kit REVISION 04 November, 20 2018 Ranger XP Door Kit Prior to installation, please verify if a revised version of this instruction sheet is available on Knowledge Center. The following symbols may be used

More information

MITCHELL FURNITURE SYSTEMS, INC.

MITCHELL FURNITURE SYSTEMS, INC. MITCHELL FURNITURE SYSTEMS, INC. MITCHELL WALL MOUNTED TABLE/BENCH SYSTEM: ARCHITECTURAL DATA Laminate, Backer & Adhesive GREENGUARD Certified Components PART I. - ATTENTION: SPECIFIER AND/OR ARCHITECT

More information

UNIFIED FACILITIES GUIDE SPECIFICATIONS

UNIFIED FACILITIES GUIDE SPECIFICATIONS USACE / NAVFAC / AFCEC / NASA UFGS-35 59 13.19 (April 2006) ----------------------------- Preparing Activity: NAVFAC Replacing without change UFGS-02397 (May 2003) UNIFIED FACILITIES GUIDE SPECIFICATIONS

More information

INSTALLATION INSTRUCTIONS CONTOURED LIGHT BAR APPLICATION: CHEVY EQUINOX/ GMC TERRAIN PART NUMBERS: ,

INSTALLATION INSTRUCTIONS CONTOURED LIGHT BAR APPLICATION: CHEVY EQUINOX/ GMC TERRAIN PART NUMBERS: , INSTALLATION INSTRUCTIONS CONTOURED LIGHT BAR APPLICATION: 2010-2014 CHEVY EQUINOX/ GMC TERRAIN PART NUMBERS: 32-21020, 32-21025 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 1 CONTOUR BAR TORQUE WRENCH 2 1

More information

7141 & NATIONAL POLE VAULT STANDARDS SPECIFICATIONS

7141 & NATIONAL POLE VAULT STANDARDS SPECIFICATIONS SPECIFICATIONS Specifications: This standard has a clamping system and a handle added for ease of operation. The clamping system is above the base pad protectors when in the lowest position and the tightening

More information

Brackets and Tenons. Product Specifications. PB Series XA-TMDA8

Brackets and Tenons. Product Specifications. PB Series XA-TMDA8 Product Specifications FINISH Exclusive Colorfast DeltaGuard finish features an E-Coat epoxy primer with an ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation

More information

Fortress Al HOME posts must always be secured to the deck framing. Fortress Al HOME posts should never be attached to only the deck boards.

Fortress Al HOME posts must always be secured to the deck framing. Fortress Al HOME posts should never be attached to only the deck boards. Installation Instructions for Fortress Al HOME Traditional Adjustable Panels with Simplified and Al HOME Posts It is the responsibility of the installer to meet all code and safety requirements, and to

More information

TIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter

TIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 TIRE RACK INSTALLATION INSTRUCTIONS 07-11 Dodge Sprinter Please read before beginning Stainless steel hardware may bind together

More information

D. Thermally Sprayed Metallic Coating (Flame Spray): STD SPEC

D. Thermally Sprayed Metallic Coating (Flame Spray): STD SPEC STANDARD SPECIFICATION SECTION 05121 MISCELLANEOUS METALWORK PART 1 - GENERAL 1.01 DESCRIPTION This section includes materials, fabrication, and installation of structural steel, connecting bolts, pipes,

More information

B32157 UNDERCARRIAGE KIT. Jeep Cherokee Jeep Wagoneer Jeep Comanche Parts List and Installation Instructions CAUTION

B32157 UNDERCARRIAGE KIT. Jeep Cherokee Jeep Wagoneer Jeep Comanche Parts List and Installation Instructions CAUTION October 15, 2007 Lit. No. B64110, Rev. 01 B32157 UNDERCARRIAGE KIT Jeep Cherokee 1984-01 Jeep Wagoneer 1984-93 Jeep Comanche 1986-92 Parts List and Installation Instructions Read this document before installing

More information

METAL METAL

METAL METAL 12654 - METAL 12654-1 PART ONE: GENERAL METAL 1.1 Architectural metals shall be of the best commercial quality and their various forms shall be straight and true. There shall be no scratches, scars or

More information

SEALING METHODS AND HARDWARE FOR EQUIPMENT AND PROCESSES APRIL 11-12, 2018

SEALING METHODS AND HARDWARE FOR EQUIPMENT AND PROCESSES APRIL 11-12, 2018 SEALING METHODS AND HARDWARE FOR EQUIPMENT AND PROCESSES APRIL 11-12, 2018 SEALING METHODS AND HARDWARE FOR EQUIPMENT AND PROCESSES INTRODUCTION to APM HEXSEAL PURPOSE To review various ways to seal equipment

More information

Barn Door & Hardware Installation Guide

Barn Door & Hardware Installation Guide Barn Door & Hardware Guide INTRODUCTION Thank you for purchasing our hardware. Our barn door and hardware will add a stunning accent to your living environment and maximize its space. This manual covers

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Trans4mer Grille Guard/Winch Mount Kit 6334 For Chevrolet Silverado 500HD & 3500 This WARN Trans4mer system can be customized to give your Chevy Silverado a wide variety of looks,

More information

Track Rack. * Track Racks are not lockable

Track Rack. * Track Racks are not lockable The Track Rack s unique staggered, sliding hook design creates the greatest parking efficiency while still providing easy access to any particular bike. When adding or removing a bike to the rack, simply

More information

ASSEMBLY AND OPERATING INSTRUCTIONS FOR MODELS SD1200 AND SD2000

ASSEMBLY AND OPERATING INSTRUCTIONS FOR MODELS SD1200 AND SD2000 ASSEMBLY AND OPERATING INSTRUCTIONS FOR MODELS SD1200 AND SD2000 WARNING: The watercraft ramp you have purchased has certain hazards associated with it s use. Never stand behind a watercraft while it is

More information

Installation Instructions: Bumper (Part # SB76850) XJ Jeep Cherokee XRC Rear Bumper

Installation Instructions: Bumper (Part # SB76850) XJ Jeep Cherokee XRC Rear Bumper NOTE: Carefully read entire instructions thoroughly before attempting to install this part. Parts Included Qty 93-7789 XJ XRC 1 93-7807 Bumper Mount Bracket: Drvr 1 93-7811 Bumper Mount Bracket: Pass 1

More information

SUBMITTAL INFORMATION "BOLTS, NUTS AND FLAT WASHERS" "ABSTRACT OF ASTM A307 GRADE A AND B" CARBON STEEL BOLTS AND STUDS, 60,000 PSI TENSILE STRENGTH

SUBMITTAL INFORMATION BOLTS, NUTS AND FLAT WASHERS ABSTRACT OF ASTM A307 GRADE A AND B CARBON STEEL BOLTS AND STUDS, 60,000 PSI TENSILE STRENGTH "BOLTS, NUTS AND FLAT WASHERS" "ABSTRACT OF ASTM A307 GRADE A AND B" CARBON STEEL BOLTS AND STUDS, 60,000 PSI TENSILE STRENGTH GRADE: LOW CARBON STEEL GRADE A GRADE B PHOSPHOROUS MAX % 0.06 0.04 SULFUR,

More information