INTERNATIONAL FASTENERS, INC. Quality Construction Fasteners. The Distributor s Choice
|
|
- Oliver Harper
- 5 years ago
- Views:
Transcription
1 INTERNATIONAL FASTENERS, INC. The Distributor s Choice SELF DRILLING SCREWS DRYWALL SCREWS DECK SCREWS WOOD WORKING SCREWS CONCRETE SCREWS POST FRAME SCREWS CLIP SCREWS NEEDLE POINT SCREWS ALUMINUM INDUSTRY SCREWS EPDM BONDED WASHERS BITS & THREADED ROD Quality Construction Fasteners
2 Daggerz Phillips Bugle Coarse Thread Phosphate, Yellow, and YELLOW ZINC CLEAR ZINC 6 x , DWC06100 DWY06100 DWZ x 1-1/8 9 10, DWC DWY x 1-1/4 9 8, DWC DWY DWZ x 1-1/2 9 6, DWC x 1-5/8 9 5, DWC06158 DWY06158 DWZ x 2 9 3, DWC06200 DWY06200 DWZ x 2-1/4 9 3, DWC x 1-5/8 8 4, DWC x 2-1/2 8 2, DWC08212 DWY08212 DWZ x 3 8 2, DWC08300 DWY08300 DWZ x 3-1/2 8 1, DWC10312 DWY x 4 8 1, DWC1040 DWY x 4-1/2 8 1, DWC x 5 8 1, DWC1050 DWY x 6 8 1, DWC1060 DWY Used in interior wood applications. Yellow used in low corrosion resistance applications. Daggerz Phillips Laminating Phosphate Drive 10 x 1-1/2 8 5, LAM10112 #2 Used to temporarily fasten drywall in double-layer applications such as firewalls. Recommended for drywall to wood, wood to wood, and drywall to drywall. 1 INTERNATIONAL FASTENERS, INC. Call (888) , fax (888) , or sales@daggerz.com
3 Daggerz Phillips Bugle Fine Thread Phosphate,, and Hi Low HI LOW 6 x , DWF DWHL x 1-1/ , DWF DWFZ DWHL x 1-1/4 18 8, DWF DWFZ DWHL x 1-1/2 18 6, DWF x 1-5/8 18 5, DWF DWHL x , DWF DWHL x 2-1/4 18 3, DWF DWHL x 2-1/2 15 2, DWF DWHL x , DWF DWHL x 3-1/2 12 1, DWF x , DWF x 4-1/2 12 1, DWF x , DWF x , DWF Drywall to metal studs. Double lead thread enables faster penetration and greater holding power. Daggerz Phillips Pan Framing Phosphate 7 x 7/ , PFSB x 7/ , PFSB07716 Sharp point used to fasten gauge metal studs in steel track framing applications. 6 x , TRSQSB06100 Daggerz Square Trim Phos 6 x 1-5/8 18 5, TRSQSB x 2-1/4 18 3, TRSQSB x , TRSQSB08300 Finishing screw; used to fasten baseboard or trim through drywall to gauge metal studs. Explore our website at INTERNATIONAL FASTENERS, INC. 2
4 Daggerz Phillips Bugle Head Self Drill Screws Phosphate,, and Dagger-Guard Coating DAGGER-GUARD Drive Drill Point 6 x , DWSDB06100 DWSDZ #2 #2 PT 6 x 1-1/ , DWSDB DWSDZ #2 #2 PT 6 x 1-1/4 20 8, DWSDB DWSDZ DWSDCT #2 #2 PT 6 x 1-5/8 20 5, DWSDB06158 DWSDZ06158 DWSDCT06158 #2 #2 PT 6 x 1-7/8 20 4, DWSDB06178 DWSDZ06178 DWSDCT06178 #2 #2 PT 8 x , DWSDZ #2 #2 PT 8 x 2-3/8 18 3, DWSDB08238 DWSDZ08238 DWSDCT08238 #2 #2 PT 8 x 2-5/8 18 2, DWSDB08258 DWSDZ08258 DWSDCT08258 #2 #2 PT 8 x , DWSDB08300 DWSDZ08300 DWSDCT08300 #2 #2 PT 10 x 3-1/2 16 1, DWSDZ #2 #3 PT 10 x , DWSDZ1040 DWSDCT1040 #2 #3 PT 10 x , DWSDCT1050 #2 #3 PT 10 x , DWSDCT1060 #2 #3 PT Daggerz Phillips Pan Framing Self Drill Screws Phosphate and Drive Drill Point 7 x 7/ , PFSDB PFSDZ #2 #2 PT 7 x 7/ , PFSDB07716 PFSDZ07716 #2 #2 PT Daggerz Square Trim Self Drill Screws Drive Drill Point 6 x , TRSQSDZ06100 #1 #2 PT 6 x 1-5/8 20 5, TRSQSDZ06158 #1 #2 PT 6 x 2-1/4 20 3, TRSQSDZ06214 #1 #2 PT 8 x , TRSQSDZ08300 #2 #2 PT 3 INTERNATIONAL FASTENERS, INC. Call (888) , fax (888) , or sales@daggerz.com
5 Daggerz Phillips Wafer Head Cement Board Self Drill Screws Dagger-Guard Coating DAGGER-GUARD Drive Drill Point 8 x 1-1/4 18 5, CMSD #2 #2 PT 8 x 1-5/8 18 4, CMSD08158 #2 #2 PT 8 x 2-1/4 18 3, CMSD08214 #2 #2 PT Used to fasten cement board to steel in tile backer and underlayment applications. Daggerz Phillips Wafer Head Fiber Cement Board Self Drill Screws with wings Dagger-Ceramic Coating DAGGER-CERAMIC Drive Drill Point 8 x 1-1/4 18 5, CMSDWW #2 #2 PT 8 x 1-5/8 18 4, CMSDWW08158 #2 #2 PT Wings ream out the fiber cement allowing the head to sink. Wings break off when meeting the steel. Daggerz Phillips Wafer Head Cement Board Screws Dagger-Guard Coating DAGGER-GUARD Spade Point 8 x 1-1/4 18 5, CMSP x 1-5/8 18 4, CMSP x 2-1/4 18 3, CMSP08214 Hi low threading used to fasten cement board to wood or gauge metal studs. Recommended for cement board to wood or steel, fiber cement board to steel. Explore our website at INTERNATIONAL FASTENERS, INC. 4
6 8 x 1/ , MTSZ x 9/ , MTSZ x 3/4 15 8, MTSZ08034 Daggerz Phillips Modified Truss Wafer Sharp Screws 8 x , MTSZ x 1-1/4 15 5, MTSZ x 1-5/8 15 4, MTSZ x 1-7/8 15 3, MTSZ x , MTSZ x 2-1/2 15 2, MTSZ x , MTSZ08300 Daggerz Phillips Modified Truss Wafer Self Drill Screws Phosphate and Drive Drill Point 8 x 1/ , MTSDB08012 MTSDZ08012 #2 #2 PT 8 x 3/4 18 8, MTSDB08034 MTSDZ08034 #2 #2 PT 8 x , MTSDB08100 MTSDZ08100 #2 #2 PT 8 x 1-1/4 18 5, MTSDB MTSDZ #2 #2 PT 8 x 1-5/8 18 4, MTSDB08158 MTSDZ08158 #2 #2 PT 8 x 1-7/8 18 3, MTSDZ08178 #2 #2 PT 8 x , MTSDZ08200 #2 #2 PT 8 x 2-1/2 18 2, MTSDZ08212 #2 #2 PT 8 x , MTSDZ08300 #2 #2 PT 10 x 3/4 16 5, MTSDZ10034 #2 #3 PT 12 x 3/4 14 4, MTSDZ12034 #2 #3 PT Recommended for metal lath to metal or wood applications. 5 INTERNATIONAL FASTENERS, INC. Call (888) , fax (888) , or sales@daggerz.com
7 Daggerz Hex Washer Head Self Drill Screws Drive Drill Point 8 x 1/ , SDZ /4 #2 PT 10 x 1/ , SDZ /16 #2 PT 10 x 3/4 16 7, SDZ /16 #3 PT 12 x 3/4 14 5, SDZ /16 #3 PT 14 x 3/4 14 3, SDZ /8 #3 PT Daggerz Phillips Thin Wafer Plymetal Self Drill Screws Dagger Ultra-Guard Coating more sizes available COATED SILVER Drive Drill Point 10 x 3/4 24 7, PLYSDCT10034M #2 #3 PT 10 x , PLYSDCT1010M #2 #3 PT 10 x 1-1/4 24 3, PLYSDCT101104M #2 #3 PT 10 x 1-1/2 24 3, PLYSDCT10112M #2 #3 PT Wafer head provides flush fit with increased load bearing for added strength. Daggerz Self Drill Eyelags Hole Diameter Thread Length Flange Diameter 1/4 x , ELSDZ1420 3/16 3/4 9/16 Self Drilling Screws 1/4 x , ELSDZ1430 3/16" 2 9/16" Drywall or Insulation to steel. Daggerz Sharp Eyelags Hole Diameter Thread Length 1/4 x , ELSZ1430 3/16 1-5/8 Drywall or Insulation to wood. INTERNATIONAL FASTENERS, INC. 6
8 INTERNATIONAL FASTENERS, INC. The Distributor s Choice Quality Construction Fasteners Make us your choice today! IFI has continued to grow our Daggerz brand into one of the most comprehensive selections of construction fasteners sold exclusively through the distribution channel. Our products include an extensive line of self drilling screws, drywall screws, deck screws, wood screws, concrete screws, post frame screws, needlepoint screws, clip screws,aluminum industry screws, bonded washers, bits and threaded rod. Our Daggerz brand screws are packaged in color coded cartons for ease of material identification. We have six locations available offering distributors prompt delivery of high-quality products at competitive pricing. We are one of the largest i mporters of self drill screws and we were the original industry leader to offer our screws in plastic buckets. International Fasteners, Inc. s success is built on our dedication to service, our loyal distributors, the relationships with our quality suppliers, and most importantly, the true professionals who sell, service, and ship our products every day. IFI specializes in customizing programs to meet the specific needs of our distributors. With custom private packaging programs and convenient shipping points, we are large enough to handle your business, yet small enough to care. TEL (888) FAX (888) sales@daggerz.com WEB Corporate-Tampa Charlotte Chicago 1341 Massaro Blvd 4123-C Barringer Drive 1401 Morse Avenue Tampa, FL Charlotte, NC Elk Grove Village, IL Dallas Philadelphia Los Angeles 1110 Pamela Drive 111 Darby Commons 1640 S Claudina Way Euless, TX Folcroft, PA Anaheim, CA Call (888) , fax (888) , or sales@daggerz.com to request a FULL LINE CATALOG or online drywall edition tampa. charlotte. chicago. dallas. los angeles. philadelphia
Coatings ASTM B117 SST Salt Spray Test Kesternick Phosphate Zinc E-Coat Dip Spin Coatings
Head and Thread types Coatings ASTM B117 Two major types of coating tests: SST Salt Spray Test screws are placed in a container and a salt solution is sprayed on the screws for a number of hours, checking
More informationSheet Steel Facts. Most common head design for self-drilling, self-tapping screws.
Sheet Steel Facts Fastener Guide for Sheet Steel Building Products August, 2003 Fastener Materials Fasteners are manufactured from several materials and coatings. For the purpose of this fact sheet, the
More informationSCREW FASTENER SELECTION FOR COLD-FORMED STEEL FRAME CONSTRUCTION
test TECHNICAL NOTE On Cold-Formed Steel Construction $5.00 Cold-Formed Steel Engineers Institute Washington, DC www.cfsei.org 866-465-4732 SCREW FASTENER SELECTION FOR COLD-FORMED STEEL FRAME CONSTRUCTION
More informationQUIK DRIVE Subfloor/Sheathing Applications
QUIK DRIVE Subfloor/Sheathing Applications Quik Drive auto-feed screw driving systems are ideal for subfloor installation because they combine the efficiency of stand-up driving with the holding power
More informationU.S. Price List UPDATED NOV 16, 2017
UPDATED NOV 16, 2017 Illinois Tool Works Renovation/Remodeling 155 Harlem Avenue, Building N3E Glenview, IL 60025 Phone: 877-489-2726 Fax: 847-619-8403 Page 1 R4 MULTI-PURPOSE FRAMING AND DECKING SCREW
More informationSpecialty Fastening Systems Solutions for the Construction Industry
Specialty Fastening Systems Solutions for the Construction Industry BI-METAL SCREWS Drywall / Denseglass SELF DRILLING SCREWS IN STAINLESS STEEL SUS304 Steel Framing Exterior Sheathing Plank / Panel Sidings
More informationFNW can handle all your hanger and fastener needs, all in one place. FNW products are sold exclusively at Ferguson.
FASTENERS PIPE HANGERS, SUPPORTS & STRUT ACCESSORIES FNW can handle all your hanger and fastener needs, all in one place. FNW products are sold exclusively at Ferguson. Quick Reference Nuts Heavy Hex Nuts...4
More informationWESTERN WIRE PRODUCTS
WESTERN WIRE PRODUCTS Celebra ng 100 years of Quality and Service 1914 2014 Thanks to our dedicated employees and customers we are celebra ng 100 years of being in business and we look forward to servicing
More informationDIVISION: METALS SECTION: METAL FASTENINGS DIVISION: FINISHES SECTION: FASTENERS REPORT HOLDER:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 1408 Reissued 12/2017 This report is subject to renewal 12/2018. DIVISION: 05 00
More informationSubmittal Sheet. Product: Item# Description Unit Pack
Submittal Sheet Submittal Sheet #0309412 Bugle Head Screws (212) Product: Item# Description Unit Pack C368 6 x 1-1/4-in, Bugle Head, Fine Thread,, Phosphate, Collated 1,000 1268YZ 10 x 3-1/2-in, Bugle
More informationBLACK OXIDE & BLACK ZINC FASTENERS INCLUDING STEEL & STAINLESS INCH & METRIC
BLACK OXIDE & BLACK ZINC FASTENERS INCLUDING STEEL & STAINLESS INCH & METRIC Black Oxide MACHINE SCREWS (Stainless) 100º 82º MACHINE SCREWS & SEMS (Steel) Combination Pan 100 82º Phillips Fillister Phillips
More informationCIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD METAL SCREWS. 6 x 3/4 P/N x 1 METAL SCREW P/N x 3/4 METAL SCREW
A21-1 1160 CIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD S For light duty applications in solid materials Color coded diameters for easy identifi cation Acid resistant NYLON FLANGED:
More informationTAPPING SCREWS 1-1 TAPPING SCREWS PHILLIPS OVAL. 1 General Fasteners HEAD ZINC BLACK SIZE SIZE CHROME CHROMATE OXIDE
TAPPING SCREWS TAPPING SCREWS PHILLIPS OVAL HEAD ZINC BLACK SIZE SIZE CHROME CHROMATE OXIDE #4 x 3/8"... REG... 110001 #4 x 1/2"... REG... 105030... 110002 #4 x 5/8"... REG... 1 10003 #4 x 3/4"... REG...
More information53932 Wood Boring Bit, 78" Features. Descriptions. Manufacturer Information. Taxonomies, Classifications, and Categories.
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 53932 Wood Boring Bit, 78" Klein Tools Catalog Number 53932 Manufacturer Klein Tools Weight per unit 0.3500 (lbs/each)
More informationSECURITY DOORS - 2', 3', 4'
INTRODUCTION: CAREFULLY READ THE CONTENTS OF THESE INSTRUCTIONS, AS THEY INDICATE THE CORRECT STEP BY STEP PROCEDURE TO ASSEMBLE THE PRODUCT. THE CARTON CONTENTS PAGE(S) WILL IDENTIFY THE ASSEMBLY PARTS.
More informationFor. Metal Roofing. Cement Roofing. Metal Framing & Fixing. Concrete Fixing
Metal To Metal Fixing Calcium Silicate Boards Metal To wood Fasteners For Concrete Metal Roofing & Cladding For Metal Roofing Fixing AHU & Ventilators Doors & Window Framing Cement Roofing Metal Framing
More informationFastener Solutions Center
www.grabberman.com Fastener Solutions Center Index Drywall Screws and Nails Bugle head coarse screws - drywall to wood attachment Bugle head coarse thread exterior grade screws - general wood to wood attachment
More informationKTSB14 Step Drill Bit #14 Double-Fluted, 3/16 to 7/8" Descriptions Description STEP DRILL BIT #14 DOUBLE-FLUTED, 3/16 TO 7/8"
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 KTSB14 Step Drill Bit #14 Double-Fluted, 3/16 to 7/8" Klein Tools Catalog Number Manufacturer Weight per unit Product
More informationUL Construction No. 254
UL Construction No. Wind-Uplift - Class 90 (See Item No. ) / Fire Not Investigated Metal Roof Deck Panels* Snap-Clad No. MSG or No. MSG min. thickness coated steel panels. Panels in. wide max., 0 in. wide
More information11 6 Round Building Assembly Instructions
11 6 Round Building Assembly Instructions 11 6 Round Building Hardware List 1. Pro Rib Brite White 36 Wide X 68 Long (Siding Steel) 11 2. Top Wall Wheel Ring 3 3. Base Ring 3 4. 1 ½ X 68 Aluminum Tubes
More informationPRICE BOOK NO. 204S ORDERING INFORMATION
Container Quantities PRICE BOOK NO. 204S ORDERING INFORMATION Replacing Catalogue 789S Effective March, 2007 and Packaged items are supplied in full containers and we reserve the right to adjust order
More informationFastener Solutions Center
NO- Structural Laminate COAT Drywall Corner System Fastener Solutions Center www.grabberman.com www.no-coat.com 1 Drywall Screws and Nails Bugle Head GRABBER INTERIOR WOOD Drywall Attaches gypsum board
More informationMETRIC FA S T E N E R S
METRIC FASTENERS CAP SCREWS & BOLTS DIN 603 Carriage Bolt, A2 SS DIN 603 Carriage Bolt, A4 SS DIN 931 Class 8.8 Hex Cap Screw, Steel Zinc DIN 931 Class 10.9 Hex Cap Screw, Plain Steel DIN 933 Class 8.8
More informationUltraCon Masonry Fasteners High Performance in a Wide Range of Applications
UltraCon Masonry Fasteners High Performance in a Wide Range of Applications The UltraCon masonry fastening system from Elco Construction Products offers optimal performance in a wide range of masonry applications.
More informationFASTENERS C O M P AT I B L E W I T H F E R O T I E S Y S T E M S. Which FERO Tie Systems Require Fasteners?
FASTENERS C O M P AT I B L E W I T H F E R O T I E S Y S T E M S Which FERO Tie Systems Require Fasteners? Structural Actions: Fastener,, or Both? With the exception of FERO tie systems that are directly
More informationREPORT HOLDER: INTERCORP DBA OF U.S. NITTO 641 NORTH POPLAR ORANGE, CALIFORNIA EVALUATION SUBJECT: STRONG POINT SCREWS
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3528 Reissued 07/2017 This report is subject to renewal 07/2019. DIVISION: 05 00
More informationFASTENERS BUILDING DEPARTMENT
FASTENERS BUILDING DEPARTMENT 952-446-1660 WWW.CITYOFMINNETRISTA.COM This handout is intended only as a guide and is based in part on the 2015 Minnesota Residential Code, Minnetrista City ordinances, and
More informationACCENT BUILDINGMATERIALS BUILDING STRONG PARTNERSHIPS GENERAL CONSTRUCTION DRYWALL/ACOUSTICAL ROOFING CONCRETE ACCESSORIES SPECIALTY ITEMS & MORE
ACCENT BUILDINGMATERIALS BUILDING STRONG PARTNERSHIPS GENERAL CONSTRUCTION DRYWALL/ACOUSTICAL ROOFING CONCRETE ACCESSORIES SPECIALTY ITEMS & MORE Accent started in 985 and is the largest supplier of industrial
More informationMETAL-TO-WOOD FASTENERS QUIKGRIP METAL2WOOD METAL2WOOD HD METAL2WOOD XD LOPRO 300SS. Value through the Roof.
METAL-TO-WOOD FASTENERS QUIKGRIP METAL2WOOD METAL2WOOD HD METAL2WOOD XD LOPRO 300SS Value through the Roof. Proven Performance. Huge Selection. Marco Quality. Value drives everything we do. That s why
More informationLEGACY REPORT. (800) (562) A Subsidiary of the International Code Council. *Revised September 2003
ICC-ES Evaluation Report ER-580* Reissued January 00 www.icc-es.org (800) 4-6587 (56) 699-054 A Subsidiary of the International Code Council Legacy report on the 997 Uniform Building Code DIVISION: 05
More information*Revised September 1, 2003
LEGACY REPORT ER-580* Reissued January, 00 ICC Evaluation Service, Inc. www.icc-es.org Business/Regional Office # 560 Workman Mill Road, Whittier, California 9060 # (56) 699-054 Regional Office # 900 Montclair
More informationNOTE: THIS DOCUMENT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT AN OFFICIAL BID DOCUMENT.
1 Aluminum Coil Stock, 50' x 24" (White), 26 Gauge each 12 2 Aluminum Coil Stock, 50'x24", Bronze Tone, 26 Gauge each 6 3 Anchors, Hammer Drive (Lead) 1/4" x 1 1/4" each 250 4 Angle, Black Iron, 1 1/2"
More informationTable of Contents III. Chapter 1: Overview of the UMB Chapter 3: Cutting the UMB Chapter 4: Fastening the UMB to framing...
Copyright 2010 Tektrim Corporation. All rights reserved. Tektrim UMB is a registered trademark of Tektrim Corporation. Tektrim Universal Molding and Baseboard (UMB) Manual is a registered trademark of
More informationPowder Actuated Fasteners - Drive Pins
122 Drive Pins Standard Pins Drive pins with a.300 diameter head are designed for permanently fastening a fixture to concrete, some types of masonry and A36 structural steel. Drive pins are manufactured
More information2013 Catalog Catalog. Decking Roofing Siding Trim. Rose River Export. For assistance, call our PrimeGuard Max hotline: (540)
2013 Catalog 2012 Catalog Decking Roofing Siding Trim Rose River Export For assistance, call our PrimeGuard Max hotline: (540) 948-5974 Stainless Steel Fasteners Lifetime Guarantee Against Rust Contents
More informationTamperproof Sex Bolts
Tamperproof Sex Bolts 6 Lobe with Pin Security Sex Bolts The Complete System A solution that replaces the traditional partition sex bolts, with superior drive characteristics, and a wider range of sizes.
More information5 ACCESS PANEL INSTALLATION SPACER *SLIDE TO LOCATION OF FASTENER DURING INSTALLATION OF EACH FASTENER
1/2 K.O. (3/8 K.O. on 165 with factory supplied 3/8 flex conduit fitting) TR - Trim Flange Side Blocking Install Method Secure fixture to structure following instructions below: 1. Remove lens and internal
More informationProfessional Quality FOR THE Professional Contractor. Marketing Offerings. 225 Elm Ave Galt, Ca bmdusa.com
Professional Quality FOR THE Professional Contractor Marketing Offerings Header Boards Professional Quality FOR THE Professional ContraCtor ID: QBHB3614 14" PVC Board Proudly Distributed by 36" Professional
More informationIF YOU DON T SEE IT HERE
www.smithfast.com Drills & Taps & Bits Screws Cotter Drilling Bolts / Hex Capscrews Lag Carraige Hitch Grade 8 Machine Grade Elevator 5 Sheet Spring Metal Roll Grade Eye 2 Square Taper Head set A325 Hex
More informationSD Screw #10x2½" 16dx2½" SD Screw #9x2½" SD Screw 10dx1½" 8d Common N54A 0.25" 0.131"
DESIGNED FOR FASTENER TYPES Fastener Types and s Specified for Simpson Strong-Tie Connectors Many Simpson Strong-Tie connectors have been designed and tested for use with specific types and sizes of fasteners.
More informationPerlok CR 1.2 Base Sheet Fastener Secure Base Sheets to Lightweight Insulating Concrete or Gypsum
Perlok CR 1.2 Base Sheet Fastener Secure Base Sheets to Lightweight Insulating Concrete or Gypsum u THE PERLOK CR 1.2 BASE SHEET FASTENER is a one piece unit, precision formed from G-90 galvanized steel,
More informationINSTALLATION SHOP DRAWINGS FOR MINNEAPOLIS, MN
MINNEAPOLIS, MN 2-0- 2-- General Notes Abbreviations Deviations from Architectural Specifications Deviations from Architectural Drawings ALUM. = ALUMINUM B.O. = BY OTHERS CONT. = CONTINUOUS. = CLEARANCE
More informationMetal Roof Installation Manual. Chapter 14: Fasteners
Metal Roof Installation Manual Chapter 14: Fasteners Chapter 14: Fasteners Chapter Contents 14. Introduction... 14-1 14.1 Fastener Parts and Installation... 14-1 14.1.1 Points... 14-1 14.1.2 Heads... 14-1
More informationInstallation Instructions
Important 1. Acclimate materials 24 hrs before installation. Maintain temperature controlled environment after installation 2. Install in accordance with manufacturer s installation instructions. Failure
More informationUNI DIN UNI DIN 7982.
Tapping screws with cylindrical head cross UNI 6954. DIN 7981. Material 15800***** GALVANIZED STEEL WHITE 16900***** GALVANIZED STEEL BLACK 15700***** STAINLESS STEEL A-AISI 304 157A4***** STAINLESS STEEL
More informationInstallation Instructions 3520WW/3520WWB Handrail
Important 1. Acclimate materials 24 hrs before installation. Maintain temperature controlled environment after installation 2. Install in accordance with manufacturer s installation instructions. Failure
More informationSatellite Speaker Mounts System Quick Installation Guide
Satellite Speaker Mounts - 5.1 System Quick Installation Guide Introduction The Satellite Speaker Mounts - 5.1 System are fully-adjustable (Tilt, Swivel, & Pivot) speaker wall or ceiling mounts. Key Features
More informationInstallation Instructions 2000/2000W/G Handrail
Important 1. Acclimate materials 24 hrs before installation. Maintain temperature controlled environment after installation 2. Install in accordance with manufacturer s installation instructions. Failure
More informationK/D FITTINGS & FASTENERS
K/ FITTINGS & FASTENERS -1 Screws P. 162-168 -2 Connector Bolts P. 169-173 -3 K/ Fittings P. 174-177 -4 Insert Nuts P. 178-181 -5 Allen Keys P. 182-183 -6 Nails & Wall Plugs P. 184 -1 Screws 1010 Machine
More informationCOMPLETE MILITARY CERTIFICATIONS OVER
MILITARY HARDWARE WITH COMPLETE MILITARY CERTIFICATIONS OVER 2,000 ITEMS Machine Screws MS24693 100 Flat Phillips 18-8 Stainless DFAR COMPLIANT 18-8 SS w/ Black Oxide Finish DFAR COMPLIANT MS35190 82 Flat
More informationUltraCon Masonry Fasteners High Performance in a Wide Range of Applications
UltraCon Masonry Fasteners High Performance in a Wide Range of Applications The UltraCon masonry fastening system from Elco Construction Products offers optimal performance in a wide range of masonry applications.
More informationPerlok CR 1.2 Base Sheet Fastener Secure Base Sheets to Lightweight Insulating Concrete or Gypsum
Perlok CR 1.2 Base Sheet Fastener Secure Base Sheets to Lightweight Insulating Concrete or Gypsum u Uses THE PERLOK CR 1.2 BASE SHEET FASTENER is a one piece unit, precision formed from G-90 galvanized
More informationFlooring Nails 6-D Flooring Nails $3.40 / 1# 6-D Flooring Nails $14.50 / 5# 8-D Flooring Nails $3.40 / 1# 8-D Flooring Nails $14.
Nails Nails Drywall Screws Common Nails 4D Common Nails $3.85 / 1# 6D Common Nails $3.00 / 1# 6D Common Nails $74.25 / 50# 8D Common Nails $3.00 / 1# 8D Common Nails $74.25 / 50# 10D Common Nails $3.00
More informationNails, Fasteners, Connectors, and Framing
Nails, Fasteners, Connectors, and Framing Nails To order Nail Sizes Nail length is often referred to as d or penny. For example a 10-D nail or a 10 Penny Nail. Use the following chart for nail length reference.
More informationMETAL-TO-METAL FASTENERS QUIKDRILL METAL2METAL METAL2METAL HD. Value through the Roof.
METAL-TO-METAL FASTENERS QUIKDRILL METAL2METAL METAL2METAL HD Value through the Roof. Reliable Self-Drilling Performance. Superior Marco Value. Value drives everything we do. That s why our exclusive Weather-Tite
More informationREPORT HOLDER: SENCO BRANDS INC IVY POINTE BOULEVARD CINCINNATI, OHIO EVALUATION SUBJECT: SENCO SELF-DRILLING AND SELF-PIERCING SCREWS
0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-3558 Reissued 06/2017 This report is subject to renewal 06/2019. DIVISION: 05 00
More informationPRODUCT INFORMATION 0.145/0.130" 100 5,
PROUCT INFORMATION Fasteners.300" Head rive Pins rive pins with a.300" head are designed for permanently fastening a fixture to concrete, some types of concrete block, and A36 or A572 structural steel.
More informationANCHORHD- Heavy Duty Anchors RW List Prices Page L - 1. Vertigo (Sammy) Rod hangars. Cap Screws. Drop-In Anchors. Coach Screws.
ANCHORHD- Heavy Duty Anchors RW List Prices Page L - 1 Cap s Vertigo (Sammy) Rod hangars 03512000 1/4 20pk Zinc Plated Cap 3.18 03501210 3/8 15pk Zinc Plated Cap 4.78 03501220 1/2 10pk Zinc Plated Cap
More informationInstructions and Parts List DR-12N Martin House
Form 36-99 Instructions and Parts List DR-N Martin House Note: It is necessary to install a post before house is put up, but the house can be assembled at any time. House parts Check parts against this
More informationThe Ultimate Wood Screw Edition
The Ultimate Wood Screw 2018 Edition Index 6 DRIVER BITS 7 FLAT HEAD WOOD-MAXX SCREWS (#5, gauge) 8 FLAT HEAD WOOD-MAXX SCREWS (#6, #7 gauge) 9 FLAT HEAD WOOD-MAXX SCREWS (#8, #9, #10 gauge) 10 PAN HEAD
More informationUltra-Thin LED/LCD TV Mount - 23" to 42"
Ultra-Thin LED/LCD TV Mount - " to 4" Installation Instructions Ultra-Thin LED/LCD TV Wall Mount Material:.0mm Cold Rolled Steel Plate TV Size: " - 4 Max load capacity: 99lbs / 45kg Wall distance: 0.4"
More informationPOWER TOOLS & FASTENERS
POWER TOOLS & FASTENERS 14N915 US Highway 20 POWER TOOLS & FASTENERS If you need mechanical fasteners and power tools, look no further than Hines Supply. We offer a wide selection of competitively priced,
More informationUltraCon Masonry Fasteners High Performance in a Wide Range of Applications
UltraCon Masonry Fasteners High Performance in a Wide Range of Applications The UltraCon masonry fastening system from Elco Construction Products offers optimal performance in a wide range of masonry applications.
More informationFASTENERS ANCHORS - ADHESIVE. AC100E Professional Kits. Fasteners - Adhesive Anchoring-Concrete & Masonry
ANCHORS - ADHESIVE AC100E Professional Kits Adhesive value pack for the professional has all the required accessories for post installed chemical anchors, this easy to handle all-in-one kit keeps all your
More informationSECTION MASONRY ANCHORAGE AND REINFORCEMENT. Display hidden notes to specifier. (Don't know how? Click Here)
PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 04080 MASONRY ANCHORAGE AND REINFORCEMENT Display hidden notes to specifier. (Don't know how? Click Here) A. Post installed masonry anchors. B. Miscellaneous
More informationTraditional Undermount: S Method (Undermount):
TOOLS REQUIRED 15.1 TOOLS REQUIRED The installation of Corian shape product must be a precise and exacting process to ensure that a good fit is always created. Using the correct tools is essential. In
More informationLarge Diameter Tapcon
CONCRETE ANCHORING SPECIALISTS Large Diameter Tapcon (LDT ) Anchors Finished head, Removable Anchor DESCRIPTION/SUGGESTED SPECIFICATIONS Self-threading Anchors SPECIFIED FOR ANCHORAGE INTO CONCRETE The
More informationFastener Solutions Center
www.grabberman.com Fastener Solutions Center Index Drywall to Metal Drywall to Wood Light Gauge Metal Framing Pan head VectorTM point metal to metal attachment Pan head VectorTM thread metal to metal attachment
More informationASSORTMENTS BRONZECLASSWB Above assortment with one #99901 Cabinet, 17 extra dividers, all drawers pre-labeld inside and out.
ASSORTMENTS 34 s BRONZECLASS Body Shop Fastener Starter 71 of the most popular items - Over 1700 pieces. Fasteners Only - No Bins Box Qty. 1 Inside of drawer BRONZECLASSWB Above assortment with one #99901
More informationHEAVY DUTY 11 STEEL CABINET
HEAVY DUTY STEEL CABINET ASSEMBLY INSTRUCTIONS ONE DRAWER BASE CABINET 05-206 Parts List Part No Description Qty Image ONE DRAWER BASE CABINET Part No Description Qty Image SB- Cabinet Body EH-0 Euro Hinge
More informationCEILING SYSTEMS. Between us, ideas become reality. Installing. Suspended Ceilings. International Version
CEILING SYSTEMS Between us, ideas become reality Installing Suspended Ceilings International Version 1 Installing Armstrong Suspended Ceilings An Armstrong suspended mineral fiber ceiling is functional,
More informationevolution fasteners (uk) ltd product guide v7
www.evolutionfasteners.co.uk evolution fasteners (uk) ltd product guide v7 T: +44(0)141 647 7100 F: +44(0)141 647 5100 E: sales@evolutionfasteners.co.uk www.evolutionfasteners.co.uk Evolution Fasteners
More informationInstallation Type. Edge of Door. Pull (Hinge) Side Mounted. Hinge Edge of Door. Push (Stop) Side Mounted
Installation Instructions CAUTION An incorrectly installed or improperly adjusted door closer can cause property damage or personal injury. These instructions should be followed to avoid the possibility
More informationFIXED SHOWER SCREEN For Wall Mount Hinges QCI5283
FIXED SHOWER SCREEN For Wall Mount Hinges QCI5283 QCI5283 Page 1 Date Certified: 06/16/2016 Parts List with wall mount clamp ITEM NO. DESCRIPTION QTY. 1 FIXED GLASS PANEL 1 2 WALL MOUNT CLAMP 1 3 U-CHANNEL
More informationWhen we say Pro-Twist is the best, most complete fastener line around, we make a good point.
When we say Pro-Twist is the best, most complete fastener line around, we make a good point. Because the quality of the point is what makes a fastener superior. And Pro-Twist fasteners from PrimeSource
More informationREPORT HOLDER: HILTI, INC DALLAS PARKWAY, SUITE 1000 PLANO, TEXAS EVALUATION SUBJECT: HILTI SELF-DRILLING AND SELF-PIERCING SCREWS
0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-2196 Reissued 10/2017 This report is subject to renewal 10/2019. DIVISION: 05 00
More informationInstallation Instructions. Installation Type
Installation Instructions 300 & 3050 Slide Track Door Closers Non Hold Open & Hold Open Models Note: Hold open models are not permitted to be installed in Listed fire door assemblies. PULL SIDE MOUNTED
More informationFastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength
Fastener Basics Common Fastener Types Fastener Grade (US) or Class (metric) refers to the mechanical properties of the fastener material. Generally, a higher number indicates a stronger, more hardened
More informationMachine threads are usually functional with internal-threaded workpieces, such as nuts
2010 Screws Machine Threads. i macine thread Machine threads are usually functional with internal-threaded workpieces, such as nuts Wood Metal Sheet Threads. i A type thread AB type thread 17 type thread
More informationInstallation Instructions
Installation Instructions CAUTION An incorrectly installed or improperly adjusted door closer can cause property damage or personal injury. These instructions should be followed to avoid the possibility
More informationCITY OF LOS ANGELES CALIFORNIA
BOARD OF BUILDING AND SAFETY COMMISSIONERS VAN AMBATIELOS PRESIDENT E. FELICIA BRANNON VICE-PRESIDENT JOSELYN GEAGA-ROSENTHAL GEORGE HOVAGUIMIAN JAVIER NUNEZ CITY OF LOS ANGELES CALIFORNIA ERIC GARCETTI
More informationMetallics. Supplemental Insert
Supplemental Insert 2010-2011 Anchors, Fasteners, Tools, and Specialty Products for the Electrical, Plumbing, Heating and Air Conditioning Industries SCREWS A Hex CONSTRUCTION FASTENERS METAL TO WOOD Screws
More informationAUXILIARY FRAMING AND ACCESSORIES
CUSTOM CABINETS & RACKS STRUT AND ACCESSO- RIES JUNCTION KITS ANGLE AND BRACE KITS SPLICE KITS BRACE KITS INSTALLATION KITS WALL ANGLE KITS RUBBER END CAPS SUPPORT INSTALLATION AND SUPPORT KITS STANCHION
More informationDurabrac Gable Bracket Installation Guide
Durabrac Gable Bracket Installation Guide Durabrac vinyl gable brackets are manufactured from high quality natural white vinyl with UV inhibitors. There are currently six styles and three sizes to choose
More informationCloset Carousel Installation Instructions. Models TKA 5 Through TKA 14 Equipped with Footswitch Controls
Tools Required: Phillips Screwdriver (#2) Adjustable Wrench Level Tape Measure Utility Knife Electric Drill Drill Bits for Anchors Ladder (4 foot) Models TKA 5 Through TKA 14 Equipped with Footswitch Controls
More informationCATALOG AUGUST 2018 ลวดเย บ ตะป สกร เข ม
AUGUST 2018 ตะป ม วน C5 REPLACEMENT MAGAZINE LONG TRACK Information: Dewalt DDF5150500 C5 Replacement Magazine - Long Track.The C5 Trak-It is a powerful gas nailer designed for driving nails and clips
More informationComplete line of Holemaking Products and Accessories
Complete line of Holemaking Products and Accessories I N T R O D U C I N G Holemaking Products Klein Tools has expanded our line of Holemaking products. We have added new flexible drill bits and related
More informationINSTALL INSTRUCTIONS WELCOME TO THE NEWAGE PERFORMANCE CABINETRY SERIES NEWAGE STEEL WELDED CABINETRY
NEWAGE STEEL WELDED CABINETRY WELCOME TO THE NEWAGE PERFORMANCE CABINETRY SERIES ALL CABINETS MUST BE MOUNTED TO STUDS ON A SECURE WALL, AS PER THESE INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS
More informationFASTENERS QUIKDRILL QUIKGRIP CLIPSCREWS. Value through the Roof.
FASTENERS QUIKDRILL QUIKGRIP CLIPSCREWS Value through the Roof. METAL-TO-METAL FASTENERS for CANADA QUIKDRILL METAL2METAL Value through the Roof. Reliable Self-Drilling Performance. Superior Marco Value.
More informationWADE 2-1. Universal Carrier. Exclusive Features of 400 Series Universal Carrier for Lavatories, Urinals, Drinking Fountains.
Universal Carrier Exclusive Features of 400 Series Universal Carrier for Lavatories, Urinals, Drinking Fountains. The 400 series carrier accommodates most urinal, water-cooler or hanger plate lavatory
More information(Public Law ). Infasco Bolts are Original Equipment on both MACK and CATERPILLAR Products
INFASCO CAP SCREWS The Bolt of Choice for the Heavy Equipment Industry Infasco is the largest manufacturer of Grade 5 and Grade 8 Cap Screws in North America. They are accepted and used by all branches
More informationFASTENERS ANCHORS - ADHESIVE. AC100E Professional Kits. Fasteners - Adhesive Anchoring-Concrete & Masonry
ANCHORS - ADHESIVE AC100E Professional Kits Adhesive value pack for the professional has all the required accessories for post installed chemical anchors, this easy to handle all-in-one kit keeps all your
More informationInstallation Instructions
Important 1. Acclimate materials 24 hrs before installation. Maintain temperature controlled environment after installation. 2. Install in accordance with manufacturer s installation instructions. Failure
More informationCSI Section DMI Light Gage Structural Steel Framing Systems. Blocking Fire Rated Pre-cut (Proprietary) Furring Wall Preservative Treated
DMI Database CCF5IF9HGLPD-QB (4,88) $14,775.00 CSI Section 05400 DMI Light Gage Structural Steel Framing Systems Angle Framing Bridging Channel Flat Strapping Furring Clip Angle Soffit/Fascia/Deck Framing
More informationSigma Fasteners, Inc. Section 7
DESCRIPTION PAGE s Wedge s 7-1 Drop-In s 7-2 Single Expansion s 7-2 Machine Screw s 7-2 Lag Shields 7-3 Lead Wood Screw s 7-3 Hammer Drive s 7-4 Hollow Wall Fasteners 7-5 Toggle Bolts 7-6 Toggle Wings
More informationInstallation Guide. Rockfon Eclipse
Installation Guide Rockfon Eclipse GENERAL INFORMATION System description: Rockfon Eclipse is a frameless acoustic island made from a 40 mm bevel edged stone wool panel. The visible side is covered with
More informationOn-roof system Alpha + Product catalogue
On-roof system Alpha + Product catalogue Contents ALPHA +... 3 1. ALPHA + BASE RAILS... 4 2. ALPHA + SPLICES... 5 3. ALPHA + TELESCOPING END PIECES... 6 4. ALPHA + INTER-MODULE CLAMPS AND MODULE END CLAMPS...
More informationInstallation Instructions
Important 1. Acclimate materials 24 hrs before installation. Maintain temperature controlled environment after installation 2. Install in accordance with manufacturer s installation instructions. Failure
More informationInstallation Instructions
Important 1. Acclimate materials 24 hrs before installation. Maintain temperature controlled environment after installation. 2. Install in accordance with manufacturer s installation instructions. Failure
More informationTENANT IMPROVEMENT 16 FEBRUARY WEST 27TH STREET, 4TH FLOOR 100% CD OWNER/BID ADD 1-03/08/2018
SECTION 055000 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More information