(Public Law ). Infasco Bolts are Original Equipment on both MACK and CATERPILLAR Products

Transcription

1 INFASCO CAP SCREWS The Bolt of Choice for the Heavy Equipment Industry Infasco is the largest manufacturer of Grade 5 and Grade 8 Cap Screws in North America. They are accepted and used by all branches of the Federal Government as well as GM, Ford, GE, Westinghouse, General Dynamics and many other national and international companies. With Infasco Cap Screws, our customers will be in full compliance with the new Fastener Quality Act (Public Law 0-59). Grade 8 Infasco Fastener Grade 5 Infasco Fastener U.S. GOVERNMENT APPROVED Infasco Bolts are Original Equipment on both MACK and CATERPILLAR Products Copyright 009. All rights reserved. A0-A REVISED FEBRUARY, 009

2 INFASCO FASTENERS VS. PRIVATE BRAND FASTENERS Some nut and bolt distributors have fasteners made with their own private head markings. This is costly to them and to their customers. But, do you get anything et anything more more even even though though yo you are paying aying more? more?? INFASCO FASTENERS PRIVATE HEAD FASTENERS Highest quality at a fair price - All certified bolts must meet the same industry standards. Infasco is Original Equipment for many well known manufacturers, such as: Caterpillar and Infasco s triangle trade mark is easily identifiable and traceable. Their bolts are widely accepted by government and industry. Infasco is a certified member of the American Association for Laboratory Accreditation. You have the assurance of correct and consistent testing methods. A0-B REVISED FEBRUARY, 009 Higher price without any increase in quality. Private heads are never used as original equipment. Private headed bolts mask the identity of the maker. Not only can the manufacturer change from one year to the net, but bolts could even be made overseas without your knowledge. Private headed bolts must always be fully tested and certified. But, if you don t have a testing laboratory, then what do you do? Protect yourself - Do not rely on impressive looking unscientific tests performed in your shop. Insist on Standardized procedures which meet accepted requirements. Copyright 009. All rights reserved.

3 Our Grade-8 Fastening System is Your Solution to Counterfeit Bolts With Our Grade 8 Fastening System YOU GET... QUALITY ASSURANCE SAFETY RELIABILITY DEPENDABILITY All Our Grade-8 Fasteners are Manufactured in North America by the Biggest Manufacturer of Standard Fasteners in the World. With Our Grade 8 Fastening System YOU AVOID... DOWN TIME INCREASED COSTS POTENTIAL LIABILITY COUNTERFEIT HARDWARE Be Smart, Be Safe. Choose The Best. The Top Quality, Safe and Reliable Grade-8 Fastening System. Copyright 009. All rights reserved. A0-C REVISED FEBRUARY, 009

4 Grade-8 Fastening System is Your Solution to these problems. In todayʼs hi-tech, competitive world, equipment has more power, speed and sophistication than ever before. Thatʼs why YOU NEED... Our Dependable Grade-8 Fasteners. Since the current business environment requires an even better bottom line, you must take into account TOTAL COST, not just price. Thatʼs why YOU NEED... Our Fastening System. Our Grade-8 Fasteners Reduce Downtime and Overall Maintenance Costs. Everyone is becoming aware of the problem of imported counterfeit bolts. Thatʼs why YOU NEED... Us, The fastener supplier you can rely on for original equipment quality. Because of increasing liability problems today, sound business practice demands that safety becomes a top priority. Thatʼs why YOU NEED... Our Grade-8 Fastening System. A0-D REVISED FEBRUARY, 009 Copyright 009. All rights reserved.

5 HEX HEAD CAP SCREWS USS coarse fine THREADS PER INCH DIAMETER /4 7/6 / 9/6 7/8 USS TECHNICAL DATA HEX HEAD MARKING AISI, ASTM MATERIAL PHYSICAL PROPERTIES MARKING SPECIFICATION OR No. TYPE AND GRADE FOR PROOF LOAD TENSILE ROCKWELL FASTENER DIA. (PSI) STRENGTH HARDNESS INCHES (MIN. PSI) No Marking C-00 Low Carbon /4 thru,000 60,000 B-00 ma. GRADE C-00 Steel No Marking C-08 Low Carbon /4 thru 55,000 74,000 B-00 ma. GRADE C-00 Steel 7/8 thru,000 60,000 Radial Lines C-08 Medium /4 thru 85,000 0,000 C5-4 GRADE 5 Carbon Steel over to 74,000 05,000 C9-0 Quenched & Tempered (Heat Treated) 6 Radial Lines 875 Medium Up to 0,000,000 C-9 GRADE Carbon Alloy Steel, Quenched & Tempered 9 Radial Lines SPECIAL Special Carbon Up to 45,000 80,000 C8-4 Eceeds Gr.-8 Alloy Steel to Eceeds Specifications Quenched & 00,000 GRADE 8 Ultra Alloy Tempered TENSILE STRENGTH MATERIAL HEAD PLATING ILLUSTRATION 80,000 PSI Special carbon % higher Yellow zinc Alloy steel Head for Plating provides For maimum Greater Effective Strength Wrenching Resistance to Corrosion,000 PSI Medium Standard Yellow zinc Carbon alloy Plating provides Steel Effective Resistance to Corrosion 0,000 PSI Medium Standard Lusterplated Carbon To resist rust Steel And corrosion The formula for determining basic thread length on cap screws is as follows: a. For bolts or screws 6 in. and shorter - twice the diameter plus /4 inch. b. For bolts or screws over 6 inches long - twice the diameter plus / inch. c. When bolts or screws are too short to apply the formula the thread will be etended as close to the head as possible. Copyright 008. All rights reserved. A0- REVISED OCTOBER, 004

6 POPULAR FASTENER ASSORTMENTS COARSE (USS) & FINE () GRADE 5 HARDWARE ASSORTMENT 464 pieces 7 items with bin label set and () #0 bins Part No. 07L Half quantities available, use 07M The most popular sizes of USS (coarse) and (fine) cap screws, nuts, s and s /4 through / diameters. 80 compartment combination cabinet Two 40 bin cabinets; 5 wide high deep Grade 5 cap screws are manufactured from 08 carbon steel for a minimum tensile strength of 0,000 PSI. /4 / / / / /4 / /4 / / /4 7/6 /4 USS he nut 7/6 /4 / /4 / 7/6 USS he nut / /4 7/6 /4 he nut /4 7/6 USS he nut /4 /4 / 7/6 he nut /4 7/6 7/6 USS he nut /4 7/6 he nut / / / USS he nut /4 7/6 7/6 he nut / /4 7/6 / / / he nut FINE USS COARSE This assortment also available in Grade L9 and 8 GRADE L9 COARSE (USS) & FINE ( ) ASSORTMENT 475 pieces 7 items Includes bin labels and () #0 bins Part No * Contains sizes shown above, with one eception. Grade L9 assortments are supplied with USS s. GRADE 8 COARSE (USS) & FINE ( ) ASSORTMENT 475 pieces 7 items Includes bin labels and () #0 bins Part No. 087 * Contains sizes shown in chart above. A0- REVISED OCTOBER, 004 Copyright 008. All rights reserved.

7 POPULAR FASTENER ASSORTMENTS SMALL & LARGE DIAMETER Coarse Thread COARSE (USS) GRADE 5 HARDWARE ASSORTMENT 08 pieces 96 items with bin label set and bins Part No. 704 COARSE (USS) GRADE 8 HARDWARE ASSORTMENT 08 pieces 96 items with bin label set and bins Part No. 705 The most popular sizes of USS (coarse) cap screws, nuts, s and s /4 through diameters. / to 6 in length. Includes: () #0, 40 compartment bins and () #068, compartment bin Assortment Photo for illustration purposes only. Actual Contents may avry. Copyright 008. All rights reserved. A0-A REVISED OCTOBER, 004

8 POPULAR FASTENER ASSORTMENTS SMALL & LARGE DIAMETER Coarse Thread COARSE (USS) GRADE 5 HARDWARE ASSORTMENT 96 pieces 77 items with bin label set and () #0 bins Part No. 098 The most popular sizes of USS (coarse) cap screws, nuts, s and s /4 through diameters. / to 4 in length. /4 he nut he nut he nut 7/6 he nut / he nut 9/6 he nut he nut he nut /4 /4 7/6 7/6 / / 9/6 9/6 /4 / / 7/6 / 9/6 Includes 80 compartment combination cabinet Two 40 bin cabinets; 5 wide high deep Grade 5 cap screws are manufactured from 08 carbon steel for a minimum tensile strength of 0,000 PSI. /4 /4 /4 /4 7/6 7/6 7/6 7/6 / / / / 9/6 9/6 9/6 9/6 -/ -/ -/ /4 -/ 7/6 -/ / -/ 9/ /4 4 7/6 4 / 4 This assortment also available in Grade L9 and 8 GRADE L9 COARSE (USS) ASSORTMENT 96 pieces 77 items Includes bin labels and () #0 bins Part No * Contains sizes shown above, with one eception. Grade L9 assortments are supplied with USS s. A0-B REVISED OCTOBER, 004 GRADE 8 COARSE (USS) ASSORTMENT 96 pieces 77 items Includes bin labels and () #0 bins Part No. 099 * Contains sizes shown in chart above. Copyright 008. All rights reserved.

9 80 BIN ASSORTMENTS CAP SCREWS USS (coarse) (fine) 9/6 9/6 9/6 9/6 4 4 /4 / /4 /4 /4 /4 /4 -/ 4 7/6 7/6 7/6 -/ 7/6 4 / / / / /4 / 7/6 7/6 7/6 / -/ / 4 9/6 4 - *Comes with bin label set and () #0 bins. /4 / /4 /4 /4 /4 -/ 7/8 7/8 7/8 4 -/ 4 7/6 9/6 9/6 9/6 9/6 4 4 CAP SCREWS USS (coarse) CAP SCREWS USS (coarse) 7/6 7/6 7/6 7/6 7/6 -/ 7/6 4 / / / -/ 7/8 7/8 7/ *Comes with bin label set and () #0 bins. / / / -/ / 4 / 4-/ LARGE DIAMETER Coarse & Fine Thread USS FLAT LOCK NUTS NUTS WASHERS WASHERS 9/ / /6 9/6 9/6 4 -/ 4 4-/ 5 5-/ 6 9/ / USS FLAT LOCK NUTS WASHERS WASHERS / /6-4 /- 9/6- /4 7/6 / 9/6 /4 7/6 / 9/6 USS FLAT LOCK NUTS WASHERS WASHERS -/ 7/ / 5 5-/ 6 / /6 7/8 / /4 7/6 / 9/6 7/8 /4 7/6 / 9/6 THRU DIAMETERS GRADE L9 Part No pieces 56 items Contains USS s only. GRADE 8 Part No. 0 GRADE 5 Part No pieces 6 items Contains both USS & s. SMALL DIAMETER Coarse Thread /4 THRU DIAMETERS GRADE L9 Part No GRADE 8 Part No pieces 64 items GRADE 5 Part No. 07L 47 pieces 64 items Part No. 07L available in half quantities, use Part No. 07M. SMALL & LARGE DIAMETER Coarse Thread /4 THRU DIAMETERS GRADE 8 Part No. 460 GRADE 5 Part No pieces 7 items Comes with bin label set and () #0 bins. Copyright 008. All rights reserved. A0- REVISED OCTOBER, 004

10 POPULAR FASTENER ASSORTMENTS 40 BIN GRADE 5 HARDWARE FEATURES / BENEFITS The most popular sizes of cap screws, nuts, s and s /4 through / diameters. 40 compartment cabinet. (0) Measures: 5 wide high deep Grade 5 cap screws are manufactured from 08 carbon steel for a minimum tensile strength of 0,000 PSI. USS COARSE THREAD Part No. 04L FINE THREAD Part No. 560L 606 pieces 40 items Includes bin labels and #0 bin Half quantities available, use Part No. 04M for Coarse thread and No. 560M for Fine thread. Assortment contains: /4 / / /4 /4 he nut 7/6 /4 7/6 he nut / /4 7/6 he nut /4 /4 7/6 7/6 he nut -/4 / / he nut / /4 7/6 -/4 / / This assortment also available in Grade L9 and 8 GRADE L9 COARSE (USS) ASSORTMENT 799 pieces 40 items Includes bin labels and #0 bin Part No * Contains sizes shown above, with one eception. Grade L9 assortments are supplied with USS s. GRADE 8 COARSE (USS) ASSORTMENT 799 pieces 40 items Includes bin labels and #0 bin Part No. 09 * Contains sizes shown in chart above. GRADE 8 FINE () ASSORTMENT 799 pieces 40 items Includes bin labels and #0 bin Part No. 097 * Contains sizes shown in chart above. A0-4 REVISED OCTOBER, 004 Copyright 008. All rights reserved.

11 SOSMETAL PRODUCTS INC. HARDWARE 40 BIN ASSORTMENTS Assortment contains: 9/6 7/8 9/6 7/8 -/ 9/6 7/ /6 7/ /6 7/ Comes with bin label set and #0 bin. Assortment contains: 9/6 7/8 9/6 7/8 -/ 9/6 7/ /6 7/ /6 7/ Comes with bin label set and #0 bin. LARGE DIAMETER Coarse & Fine Thread 9/6 he nut he nut he nut 7/8 he nut he nut 9/6 split split split 7/8 split split 9/6 7/8 9/6 THRU DIAMETERS GRADE 5 - Coarse Part No. 79 GRADE 5 - Fine Part No pieces 40 items LARGE DIAMETER Coarse & Fine Thread 9/6 he nut he nut he nut 7/8 he nut he nut 9/6 split split split 7/8 split split 9/6 7/8 9/6 THRU DIAMETERS GRADE 8 - Coarse Part No. 74 GRADE 8 - Fine Part No pieces 40 items NEW! FEB./009 NEW! FEB./009 Copyright 008. All rights reserved. A0-4A REVISED FEBRUARY, 009

12 THIS PAGE INTENTIONALLY LEFT BLANK

13 40 BIN ASSORTMENTS CAP SCREWS USS (coarse) (fine) -/ CAP SCREWS USS (coarse) /4 /4 /4 7/8 7/8 7/ / 7/6 / / / 7/8 7/8 7/8 4 4 /4 /4 /4 LARGE DIAMETER Coarse & Fine Thread -0 7/ Comes with bin label set and #0 bin. USS FLAT LOCK NUTS NUTS WASHERS WASHERS -6 7/ /6 / / / 7/8 USS NUTS / /6-4 /- 7/8 NUTS / /6-0 /-0 THRU DIAMETERS GRADE L9 Part No pieces items Contains USS s only. GRADE 8 Part No. 09 GRADE 5 Part No. 07 pieces 5 items Contains both USS & s. SMALL DIAMETER Coarse & Fine Thread CAP SCREWS (fine) Comes with bin label set and #0 bin. /4 THRU / DIAMETERS GRADE L9 Part No GRADE 8 Part No pieces 40 items GRADE 5 Part No. 040L 40 pieces 40 items Part No. 040L available in half quantities, use Part No. 040M. Copyright 008. All rights reserved. A0-5 REVISED OCTOBER, 004

14 POPULAR FASTENER ASSORTMENTS 8 DRAWER COARSE & FINE THREAD GRADE 5 HARDWARE ASSORTMENT 90 pieces items with bin label set and #00 cabinet Part No. 049 The most popular sizes, plus nuts, s and s /4 through / diameters. 8 drawer cabinet 00 cabinet measures; - wide high - deep Manufactured from 08 carbon steel for a minimum tensile strength of 0,000 PSI. /4 / / /4 he nut /4 /4 USS he nut /4 / he nut /4 USS he nut / /4 USS he nut / - / USS he nut / / / /4 /4 / / - /4 /4 he nut / /4 he nut FINE USS COARSE This assortment also available in Grade L9 and 8 GRADE L9 COARSE (USS) & FINE ( ) ASSORTMENT 680 pieces items Includes bin labels and #00 cabinet Part No GRADE 8 COARSE (USS) & FINE ( ) ASSORTMENT 968 pieces items Includes bin labels and #00 cabinet Part No. 086 A0-6 REVISED OCTOBER, 004 Copyright 008. All rights reserved.

15 8 DRAWER FASTENER ASSORTMENT MOST USED STANDARD FASTENER ASSORTMENT Part No pieces 89 items 00 8 drawer steel cabinet Includes bin label set USS Coarse Grade 5 cap screws sizes from /4-0 / through /- Round head machine screws sizes from 8- / through /4-0 Pan head sheet metal screws 5 sizes from 6 / through 4 He slotted head sheet metal screws sizes from 8 / through 4 Our 466 Most Used fastener assortment gives you a complete inventory of the most frequently used fasteners, all in one assortment. 89 different items, 5844 pieces in one convenient package. Cotter pins 0 sizes from /6 / through /8 USS He Nuts 6 sizes from 8- through /- Flat Washers 6 from #8 through / Lock Washers 6 sizes from #8 through / The "Most Used" fastener assortment includes the 00 8-drawer steel cabinet pictured above. The cabinet measures - inches wide, inches high, and - inches deep. Molded steel handles won't bend, loosen or break. Copyright 008. All rights reserved. A0-7 REVISED OCTOBER, 004

16 STEEL TRAY ASSORTMENTS USS GRADE 5 HARDWARE STEEL TRAY ASSORTMENT 04 pieces 4 items Part No. 00L Half quantities available, use 00M Includes cap screws, nuts, and s. Sizes from /4 / to /. Contains the most popular sizes. Manufactured from 08 quenched and tempered carbon steel, with 0,000 PSI minimum tensile strength. Rust and corrosion resistant LUSTER- PLATE. All assortments on this page come in a sturdy steel tray, which fits into both the 007 and 09 slide rack, part of Our complete line of storage cabinets. The same popular sizes are available in USS (Coarse) or (Fine) in Grades: USS Grade 8 Part No pieces 4 items USS Grade L9 Part No pieces 4 items Grade 5 Part No. 00L pieces 4 items Grade 8 Part No pieces 4 items Grade L9 Part No pieces 4 items Half quantities available, use 00M A0-8 REVISED OCTOBER, 004 Copyright 008. All rights reserved.

17 SUPRALLOY L9 CAP SCREWS/HEX NUTS/WASHERS Ideal for farms, manufacturers, maintenance shops, railroads, amusement parks, construction, equipment rental Engineered to meet 80,000 to 00,000 PSI. tensile strength. % taller head for greater wrenching and less wrench slippage. Rolled thread & chamfered tip provides easy starting. YELLOW DICHROMATE plated against rust and corrosion and to produce accurate torque. Replaces private brand bolts such as: MC-, Tru-Torq, Karalloy, Bowmalloy, Dura-Torq, Supertanium. Eceeds ASTMB6, Type IISCI specifications. CAP SCREWS DIAMETER LENGTH /4 7/6 / 9/6 7/ / USS USS USS /4 USS * * 608* USS USS * USS /4 USS 6057* * 6077* * USS USS 605* 60565* * 6065* 607* 60765* * 6085* USS / USS 6055* USS * 6074* / USS 6059* * * * 6076* 6075* 6077* 60790* USS * 6078* 6075* * / USS 60574* * 60774* 6079* USS 605* * 607* 6077* *These items will be discontinued when stock is depleted. 5 L9 HEX NUTS L9 LOCK NUTS L9 FLAT WASHERS THREADS PER INCH USS USS USS Copyright 008. All rights reserved. A0-9 REVISED OCTOBER, 004

18 ALLOY GRADE 8 CAP SCREWS/HEX NUTS/WASHERS Used by manufacturing & processing plants, school buses, mining, construction and fleets. Minimum tensile strength,000 PSI. Medium carbon Alloy steel CAP SCREWS LENGTH /4 7/6 DIAMETER / 9/6 7/8 / USS USS USS /4 USS USS USS USS /4 USS USS USS USS /4 USS / USS USS / USS USS / USS USS / USS USS / USS USS HEX NUTS LOCK WASHERS FLAT WASHERS THREADS PER INCH USS USS USS A0-0 REVISED OCTOBER, 004 Copyright 008. All rights reserved.

19 ALLOY GRADE 8 CAP SCREWS Longer Lengths / Larger Diameters Black finish. Sizes listed on this page are non-stock. Allow - weeks for delivery. LENGTH / 7/8 DIAMETER -/8 -/4 - - USS These sizes / USS available in USS Zinc-Yellow Dichromate / USS finish only USS Please see listing on / USS page A USS / USS USS / USS USS / USS USS / USS USS USS USS USS USS USS USS HEX NUTS LOCK WASHERS FLAT WASHERS THREADS PER INCH USS USS USS / Copyright 008. All rights reserved. A0- REVISED OCTOBER, 004

20 GRADE 5 CAP SCREWS / HEX NUTS / WASHERS Used universally by industrial, maintenance, automotive, and fleets. Minimum tensile strength 0,000 PSI. Medium carbon steel, quenched & tempered. CAP SCREWS DIAMETER LENGTH /4 7/6 / 9/6 7/ / USS USS USS USS /4 USS USS USS USS /4 USS USS USS USS /4 USS / USS USS USS / USS USS / USS USS HEX NUTS LOCK WASHERS FLAT WASHERS THREADS PER INCH USS ALL USS USS A0- REVISED OCTOBER, 004 Copyright 008. All rights reserved.

21 GRADE 5 CAP SCREWS Longer Lengths / Larger Diameters Sizes listed on this page are non-stock. Allow - weeks for delivery. 0 5 DIAMETER LENGTH /4 7/6 / 7/8 -/8 -/4 USS These sizes are available / USS as stock items USS * Please see listing on / USS * page A USS * / USS * USS * / USS USS * / USS USS * / USS USS / USS USS * USS * * Black finish only. Copyright 008. All rights reserved. A0- REVISED OCTOBER, 004

22 GRADE CAP SCREWS HEX HEAD CAP SCREWS, NUTS AND WASHERS Used in light duty, low stress applications. Low carbon steel - not heat treated. Available in coarse (USS) thread only. The Shear Bolt has special low strength properties that allow it to break or bend before epensive equipment is damaged. CAP SCREWS DIAMETER LENGTH /4 7/6 / / USS 90 USS USS USS USS USS USS / USS USS / USS USS / USS USS NOTE: 94 and HEX NUTS LOCK WASHERS FLAT WASHERS THREADS PER INCH USS ALL USS USS FLAT HEAD SLOTTED CAP SCREW USS (Coarse threads.) Low carbon steel. DIAMETER DIAMETER DIAMETER / LENGTH PART PART PART NUMBER NUMBER NUMBER -/4 - -/4 -/ A0-4 REVISED OCTOBER, 004 Copyright 008. All rights reserved.

23 SOCKET HEAD CAP SCREWS SOCKET HEAD CAP SCREW ASSORTMENTS Eceeds Grade 8 specifications. Includes 4 sizes of high collar s. Sizes from /4 / to / -. USS - Coarse thread. SOCKET HEAD CAP SCREWS and LOCK WASHERS Part No pieces 0 items 07 steel tray Assortment picture is for display purposes only. Actual contents may vary. Numbers in assortment Contains the most popular sizes. Manufactured from alloy steel, heat treated, with a Class A fully formed thread. 066, as well as 8 and 9 shown below comes in a sturdy steel tray which fits into both the 007 and 09 slide racks, part of Our complete line of storage cabinets. OTHER SOCKET HEAD CAP SCREW ASSORTMENTS AVAILABLE MASTER ASSORTMENT COARSE (USS) & FINE () Part No pieces items 06 steel tray COARSE (USS) & FINE () with HEX KEY WRENCHES Contains sizes: No. 0-4 / to Part No pieces 8 items 056 steel tray COARSE (USS) Contains sizes: /4 / to Part No pieces items 08 plastic tray Numbers in assortment Numbers in assortment Numbers in assortment Copyright 008. All rights reserved. A0-5 REVISED OCTOBER, 004

24 SOCKET HEAD CAP SCREWS Used for precision work. Alloy steel. Heat treated. Black finish. Class A fully formed thread. Manufactured to meet ANSI/ASME B standards. Eceeds Grade 8 specifications LENGTH 0 4 DIAMETER /4 /8 USS /6 USS /4 USS USS / USS USS USS /8 USS USS /4 USS USS USS USS /4 USS USS USS USS /4 USS / USS USS / USS USS USS 4754 KEY.0 /6 5/64 5/64 / / 7/64 9/64 5/ /6 /4 SIZES A0-6 REVISED OCTOBER, 004 Copyright 008. All rights reserved.

25 SOCKET HEAD CAP SCREWS DIAMETER LENGTH 7/6 / 7/8 -/ / USS USS USS /8 USS USS /4 USS USS USS USS /4 USS USS USS USS /4 USS / USS USS / USS USS / USS USS / USS USS USS USS USS USS KEY / 7/8 SIZES Copyright 008. All rights reserved. A0-7 REVISED OCTOBER, 004

26 /4-0 / ASSORTMENT / / / AUTOMOTIVE and INDUSTRIAL PRODUCTS 945 East Tioga Street, Philadelphia, PA 94 (5) Contents in this assortment can be found in catalog section A0 - CAP SCREWS / / 49 /4-0 -/ / / 49 SOSMETAL NO / TRAY NO HARDWARE SOCKET CAP SCREWS LOW HEAD SOCKET CAP SCREWS APPLICATIONS Specifically for use in parts too thin for standard height socket cap screws and for applications with limited clearances. FEATURES / BENEFITS Head height / of standard socket head cap screws. Heat treated alloy steel. Class A. Coarse threads*. Manufactured to meet ANSI B standards. Eceeds Grade 8 specifications. Head Height DIA. DIA. DIA. DIA. DIA. DIA. DIA. NO. 8- NO. 0-4 NO. 0- NO. / / /64 Key / Key / Key /8 Key 5/ Key /6 Key /4 Key LENGTH PART PART PART PART PART PART PART NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER / -/4 KEY # *0- is fine thread LOW HEAD SOSMETAL PRODUCTS INC. SOCKET CAP SCREWS 579 Part No pieces 8 items 06 steel tray Numbers in assortment Assortment picture is for display purposes only. Actual contents may vary. A0-8 REVISED OCTOBER, 004 Copyright 008. All rights reserved.

27 SOCKET CAP SCREWS For precision work use socket head cap screws. FLAT HEAD SOCKET CAP SCREWS Eceeds Grade 8 specifications. Manufactured from alloy steel, heat treated, with a Class A fully formed thread. Meets ANSI/ASME B standards. Minimum tensile strength: /4 to / = 80,000 PSI / & up = 70,000 PSI Flat head provides a flush finish. INDIVIDUAL FLAT HEAD SOCKET CAP SCREWS LENGTH DIAMETER /6 USS /4 USS USS / USS USS USS USS 756 KEY.0 /6 /6 5/64 5/64 / SIZES Assortment picture is for display purposes only. Actual contents may vary. DIAMETER LENGTH /6 (#0) /4 7/6 / 5 USS / USS USS USS USS /4 USS USS USS USS /4 USS Part No pieces 6 items 0 steel tray Numbers in assortment 0 USS USS KEY /8 5/ /6 7/ /4 / SIZES THREADS PER INCH USS Copyright 008. All rights reserved. A0-9 REVISED OCTOBER, 004

28 SOCKET HEAD CAP SCREWS SOCKET HEAD SHOULDER SCREWS Alloy steel. USS threads. Class A fully formed threads. Knurled head for sure grip. Minimum tensile strength: /4 to / = 80,000 PSI / & up = 70,000 PSI Meets or eceeds Grade 8 specifications. ASSORTMENT SOSMETAL PRODUCTS INC. AUTOMOTIVE SOCKET HEAD SHOULDER SCREWS AUTOMOTIVE and and INDUSTRIAL INDUSTRIAL PRODUCTS PRODUCTS East Tioga Street, Philadelphia, PA 94 (5) East Tioga Street, Philadelphia, PA 94 For Technical Support et. 9 Contents in this assortment can be found in catalog section A0 - CAP SCREWS. SOSMETAL NO. *Illustrations are actual size unless otherwise noted. TRAY NO. 07 /4 0-4 Thread /4 / 0-4 Thread /4 0-4 Thread /4 0-4 Thread 4 /4 0-4 Thread 5 /4 0-4 Thread /4-0 Thread Thread 700 / 9-6 Thread 700 / 8 /4-0 Thread Thread 70 / 0-6 Thread /4-0 Thread Thread /4-0 Thread Thread 705 /- Thread 7005 /4-0 Thread 704 / 7-6 Thread 70 /- Thread 7007 / -8 Thread 708 / 8-6 Thread 70 4 /- Thread Part No pieces items 07 steel tray * 704* Numbers in assortment A B C PART A B C PART SHOULDER THREAD SHOULDER NUMBER SHOULDER THREAD SHOULDER NUMBER DIA. DIA.. LENGTH DIA. DIA. LENGTH MOVING SHAFT OR PIVOT STATIONARY GUIDE PULLEY SHAFT USES / /4 0-4 / / 708 / / / -6 / 700 / / / / / / / / / -6 -/4 704 /4-0 / / / / / / / /- -/ /4-0 -/ / / / / / / /- -/ / / / /- -/ / / / Key sizes: /4" dia. - /8 key; " dia. - 5/ key; " dia. - /6 key; / dia. - /4 key; " dia. - key; " dia. - key A0-0 REVISED OCTOBER, 004 Copyright 008. All rights reserved.

29 SOCKET HEAD CAP SCREWS BUTTON HEAD SOCKET CAP SCREWS Alloy steel, heat treated. Eceeds Grade 8 specifications. Maimum resistance to stretching, snapping, breaking or shearing. Low head height for streamline design. Use for all fastening applications. Minimum tensile strength 80,000 P.S.I. ASSORTMENT SOSMETAL PRODUCTS INC. AUTOMOTIVE BUTTON SOCKET CAP SCREWS AUTOMOTIVE and and INDUSTRIAL INDUSTRIAL PRODUCTS PRODUCTS East Tioga Street, Philadelphia, PA 94 (5) East Tioga Street, Philadelphia, PA 94 (5) Contents in this assortment can be found in catalog section A0 - CAP SCREWS. SOSMETAL NO. Illustrations are not actual size. TRAY NO / / 6 8- / /4-0 / Part No pieces 9 items 07 steel tray / / / Numbers in assortment LENGTH PART PART PART PART PART PART PART NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER /6 /4 / 7/8 KEY SIZES DIA. DIA. DIA. DIA. DIA. DIA. DIA USS USS USS USS USS /6 805 / / / 807 /8 809 /8 809 LENGTH PART PART PART PART PART PART PART PART NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER /4 / 7/8 -/4 KEY SIZES DIA. DIA. DIA. DIA. DIA. DIA. DIA. DIA. /4-0 / /- - USS USS USS USS USS / 8 5/ 8 /6 8 /6 8 7/ 8 7/ Copyright 008. All rights reserved. A0-0A REVISED OCTOBER, 004

30 THIS PAGE INTENTIONALLY LEFT BLANK

31 SOCKET HEAD CAP SCREWS TAMPERPROOF SOCKET CAP SCREWS APPLICATIONS Prevents unauthorized removal of parts & equipment from vending machines, computers, telephone booths, electrical panels, control units, street signs, thermostats. FEATURES / BENEFITS Manufactured of heat treated alloy steel. Coarse threads*. Meets ANSI-B specification. Non-destructive pin is formed by special cold-heading process. Minimum tensile strength 80,000 P.S.I. Meets or eceeds Grade 8 specifications. Special sized hole to accept pin at both ends of he key. Tamper-resistant pin in the center of the head prevents removal by ordinary He keys Part No pieces 7 items 056 steel tray Includes he keys Numbers in assortment DIA. DIA. DIA. DIA. DIA. DIA. DIA. DIA. NO NO. 6- NO. 8- NO. 0-4 NO. 0- NO. / / Key 7/64 Key 9/64 Key 5/ Key 5/ Key /6 Key /4 Key Key LENGTH PART PART PART PART PART PART PART PART NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER /4 / -/4 KEY # *0- is fine thread Copyright 008. All rights reserved. A0- REVISED OCTOBER, 004

32 SOCKET HEAD CAP SCREWS TAMPERPROOF FLAT HEAD SOCKET CAP SCREWS Part No pieces 5 items 056 steel tray Includes he keys Numbers in assortment LENGTH PART PART PART PART PART PART PART PART NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER /4 / -/4 KEY # DIA. DIA. DIA. DIA. DIA. DIA. DIA. DIA. NO NO. 6- NO. 8- NO. 0-4 NO. 0- NO. / / Key / Key / Key /8 Key /8 Key 5/ Key /6 Key 7/ Key TAMPERPROOF BUTTON HEAD SOCKET CAP SCREWS Part No pieces 5 items 056 steel tray Includes he keys Numbers in assortment LENGTH PART PART PART PART PART PART PART PART NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER /4 / -/4 KEY # DIA. DIA. DIA. DIA. DIA. DIA. DIA. DIA. NO NO. 6- NO. 8- NO. 0-4 NO. 0- NO. / / Key / Key / Key /8 Key /8 Key 5/ Key /6 Key 7/ Key A0- REVISED OCTOBER, 004 Copyright 008. All rights reserved.