Perlok CR 1.2 Base Sheet Fastener Secure Base Sheets to Lightweight Insulating Concrete or Gypsum
|
|
- Esther Brown
- 6 years ago
- Views:
Transcription
1 Perlok CR 1.2 Base Sheet Fastener Secure Base Sheets to Lightweight Insulating Concrete or Gypsum u THE PERLOK CR 1.2 BASE SHEET FASTENER is a one piece unit, precision formed from G-90 galvanized steel, coated with CR. A Pogo Stick or wooden mallet should be used to install the fastener. This fastener is designed to secure base sheets to a minimum 1.25 thickness of poured lightweight insulating concrete or various gypsums. THE PERLOK CR 1.2 BASE SHEET FASTENER is Factory Mutual and Dade County approved. u THE PERLOK CR 1.2 BASE SHEET FASTENER is designed to secure base sheets to lightweight insulating concrete or various gypsums. u THE PERLOK CR 1.2 BASE SHEET FASTENER is F.M. and Dade County approved. u PERLOK CR 1.2 BASE SHEET FASTENER & Plate exceeds F.M. Class I-90 Wind Uplift requirements when installed in accordance with I-90 nailing pattern. u Assembled PERLOK CR 1.2 BASE SHEET FASTENER greatly reduces installation time and labor cost. u Entire fastener is CR coated to prevent in-place corrosion. A special corrosion resistant CR coating exhibits less than 15% red rust after 30 Kesternich cycles. CR is a unique epoxy based coating specifically applied to optimize resistance to corrosion. This special coating exceeds F.M. Approval Standard Lightweight insulating concrete or gypsum must be surface dry and reasonably smooth prior to roofing. For the best performance, the fastener should always be installed perpendicular to the substrate. Assembled PERLOK CR 1.2 BASE SHEET FASTENER is assembled with a GALVALUME 2.75 plate. Use the Pogo Stick to install the fastener. F.M. Approved For increased wind uplift resistance and high-wind applications, it is required that the PERLOK CR 1.2 BASE SHEET FASTENER with the PERLOK Base Sheet Plate be used in accordance with an approved I-90 nailing pattern. Note: On reroofing applications, prior to job start, roof should be inspected or tested to determine the pullout values. Physical Data Base Sheet Fastener: Head Size: x 1 Leg : 1.2 Material: G-90 galvanized with CR coating Plate: Diameter: 2.75 Material: GALVALUME Packaging: Assembled: 1000 per carton Shipping Weight: 37 lbs. Standard: 1000 per carton Shipping Weight: 16 lbs. Plate: 1000 per carton Shipping Weight: 20 lbs.
2 Perlok CR 1.7 Base Sheet Fastener Secure Base Sheets to Lightweight Insulating Concrete or Gypsum u THE PERLOK CR 1.7 BASE SHEET FASTENER is a one piece unit, precision formed from G-90 galvanized steel, coated with CR. A Pogo Stick or wooden mallet should be used to install the fastener. This fastener is designed to secure base sheets to a minimum 2 thickness of poured lightweight insulating concrete or various gypsums. THE PERLOK CR 1.7 BASE SHEET FASTENER is Factory Mutual and Dade County approved. u THE PERLOK CR 1.7 BASE SHEET FASTENER is designed to secure base sheets to lightweight insulating concrete or various gypsums. u THE PERLOK CR 1.7 BASE SHEET FASTENER is F.M. and Dade County approved. u PERLOK CR 1.7 BASE SHEET FASTENER & Plate exceeds F.M. Class I-150 Wind Uplift requirements when installed in accordance with FM requirements. u Assembled PERLOK CR 1.7 BASE SHEET FASTENER greatly reduces installation time and labor cost. u Assembled Base Sheet Fasteners are packaged for easy handling on the roof. u Entire fastener is CR coated to prevent in-place corrosion. A special corrosion resistant CR coating exhibits less than 15% red rust after 30 Kesternich cycles. CR is a unique epoxy based coating specifically applied to optimize resistance to corrosion. This special coating exceeds F.M. Approval Standard Lightweight insulating concrete or gypsum must be surface dry and reasonably smooth prior to roofing. For the best performance, the fastener should always be installed perpendicular to the substrate. Assembled PERLOK CR 1.7 BASE SHEET FASTENER is assembled with a GALVALUME 2.75 plate. Use the Pogo Stick to install the fastener. I-150 F.M. Approved The CR Base Sheet Fastener is FM approved to I-150 with certain base sheet and insulating concrete combinations. Note: Prior to job start, contact DERBIGUM Americas, Inc. to determine the correct nailing pattern. On reroofing applications, prior to job start, roof should be inspected or tested to determine the pullout values. Physical Data Base Sheet Fastener: Head Size: x 1 Leg : 1.75 Material: G-90 galvanized with CR coating Plate: Diameter: 2.75 Material: GALVALUME Packaging: Assembled: 500 per carton Shipping Weight: 21 lbs. Standard: 1000 per carton Shipping Weight: 20 lbs. Plate: 1000 per carton Shipping Weight: 20 lbs.
3 Perlok Standard Roofing Fastener Designed to Secure Insulation and Roofing to Steel & Wood Decks u The PERLOK STANDARD ROOFING FASTENER is designed to secure insulation and roofing membrane to standard steel (18 ga. 24 ga.) and wood. It is available in lengths from 1 5/8 8. The PERLOK STANDARD ROOFING FASTENER is Factory Mutual and Dade County approved. Use with a PERLOK 3 steel plate. u The PERLOK STANDARD ROOFING FASTENER is designed to secure insulation and roofing membrane to steel and wood decks. u Heavier shank & thread diameters than most standard roofing fasteners. u Deep buttress thread for high pullout resistance. u Extra sharp spade point for quick installation in new or reroof applications. u Available with hex head or #3 phillips truss head. A special corrosion resistant CR coating exhibits less than 15% red rust after 30 Kesternich cycles. CR is a unique epoxy based coating specifically applied to optimize resistance to corrosion. This special coating exceeds F.M. Approval Standard The PERLOK STANDARD ROOFING FASTENER must penetrate steel decks a minimum of 3/4, wood plank decks a minimum of 1 and 1/2 through the underside for plywood decks. Using a screwshooter, drive the fastener until a slight depression is seen around the plate, or with very rigid insulation boards, watch for the plate to dimple. Note: Care must be taken not to overdrive the fastener and fracture the skin of the insulation. Fastener must be tight enough so that the plate doesn t turn. For steel decks, Factory Mutual requires that the fastener penetrate the deck at the top fl ute. To speed installation, this fastener is also available as a labor saving preassembled screw and plate. See PERLOK Preassembled screw and 3 steel plate. Product Information The data below is constant for each PERLOK STANDARD ROOFING FASTENER. Thread Diameter:.220 Head Diameter: Truss Head:.435 Hex Head:.390 Head Style: #3 Phillips Truss Head* 1/4 Hex Head* : CR *#3 phillips bit or hex head drive included in each carton. MSDS Available on Request at (800) or at Thread Packaging Weight 5 5 / 8 Full lb 2 1 / 4 Full lb 2 7 / 8 Full lb 3 1 / lb 3 3 / lb 4 1 / lb lb lb lb lb
4 Perlok Dual Fastener Roof Insulation and Membrane Fastener for Base Ply, Recover Board and Insulation u PERLOK DUAL FASTENER is a roof insulation and membrane fastener for base ply, recover board and insulation to wood fiber or poured gypsum decks. u Composition: Factory pre-assembled components consisting of: TUBE: Precision formed from Galvanized (G-90) coated steel to prevent corrosion. The tube is shaped to easily penetrate decking and exiting membranes. DISK: Precision formed from Galvalume (AZ-55) coated steel to prevent corrosion. The disk is securely clamped to the tube, 2.7 diameter, rib reinforced to resist cupping. LOCKING STAPLE: Precision formed from high tensile steel wire. Physical Data Available s Packaging 1.4, 1.8, 2.8, and 3.8 PERLOK DUAL FASTENER 500 per Carton 4.8 PERLOK DUAL FASTENER 250 per Carton
5 Installation Method u Drive fastener perpendicular to roof deck seating cap flash with roofing surface. Once tube is set, drive the locking staple thru the tube/disk unit into the deck until the top of the staple is flush with the cap (see illustration). The PERLOK DUAL FASTENER should always be embedded into the structural roof deck to a depth of at least 1. u Operation: When locking staple is driven, its dual wire legs diverge anchoring the fastener in place (see illustration on first page). Uplift resistance may vary depending on the density and integrity of the substrate. u Field Testing: On-site withdrawal testing should always be performed to evaluate the ability of the roofing substrate to satisfactorily accept and retain fasteners. Such testing may alter fastener selection and modify applicable fastening patterns. u Fastening Patterns: PERLOK DUAL FASTENER density and spacing vary depending on applicable uplift requirements. Local codes, governing Approval bodies, Derbigum membranes, and individual roof deck manufacturers all may have specific requirements that need to be addressed prior to beginning any roofing project. The following illustrates typical Factory Mutual recommended fastening patterns accepted by DERBIGUM Americas, Inc. and roof deck manufacturers. Fastening Guide for Base Sheets The following base ply attachment meets FM Class 1-60, 1-75 or 1-90 Windstorm Classification. DERBIGUM GP/XPS, Derbibase Ultra, Derbibase, PRS Glass Base Sheet, or Glass Ply IV/VI is fastened in the field of the roof with PERLOK DUAL FASTENER installed 9 on center in the side laps and 18 on center staggered in 2 rows, equally spaced, between the base ply side laps. Approximately 86 fasteners per square (100 ft. 2 ). Fastening Guide for Recovery Board and Insulation The following fastening attachment meets FM Class 1-90 Windstorm Classification. Approved insulation boards listed in FM Global Approval Guide or Roofnav for use with Derbigum roof systems is fastened with 8 Perlok Dual Fasteners per 4 x 4 board in a diamond in a box pattern. (1 fastener per 2 ft. 2 ).
6 Designed to Secure Insulation and Roofing to Steel & Wood Decks u The PERLOK HEAVY DUTY ROOFING FASTENER is designed to secure insulation and roofing membrane to heavy steel (18 ga. 20 ga.). It is available in lengths from 1 1/4-26. The PERLOK HEAVY DUTY ROOFING FASTENER is Factory Mutual and Dade County approved. Perlok Heavy Duty Roofing Fastner u The PERLOK HEAVY DUTY ROOFING FASTENER is designed to secure insulation and roofing membrane to heavy steel and wood decks. u Heavier shank & thread diameters than most heavy duty roofing fasteners. u Deep thread for high pullout resistance. u Extra sharp spade point for quick installation in new or reroof applications. A special corrosion resistant CR coating exhibits less than 15% red rust after 30 Kesternich cycles. CR is a unique epoxy based coating specifi cally applied to optimize resistance to corrosion. This special coating exceeds F.M. Approval Standard The PERLOK HEAVY DUTY ROOFING FASTENER must penetrate the deck a minimum of 3/4. Using a screwshooter, drive the fastener until a slight depression is seen around the plate, or with very rigid insulation boards, watch for the plate to dimple. Note: Care must be taken not to overdrive the fastener and fracture the skin of the insulation. Fastener must be tight enough so that the plate doesn t turn. Use with a PERLOCK 3 steel plate. For best installation results, use a variable speed rpm screw gun. Product Information The data provided is constant for each PERLOK HEAVY DUTY ROOFING FASTENER. Thread Diameter:.245 Shank Diameter:.190 Head Diameter:.435 Head Style: : #3 Phillips Truss Head** CR **#3 phillips bit or hex head drive included in each carton MSDS Available on Request at (800) or at Thread Packaging Weight 1 1 / 4 Full lb 1 3 / 4 Full lb 2 Full lb 3 Full lb lb lb lb lb lb lb lb lb lb lb lb Longer lengths upon request. Call DERBIGUM for information.
7 Designed to Secure Roofing Materials to Light Gauge Steel, Roof Decks Perlok Extra Heavy Duty Roofing Fastner u The PERLOK EXTRA HEAVY DUTY ROOFING FASTENER is a specialized, high performance fastener designed to secure roofing materials to certain light gauge steel. O.S.B., or aluminium roof decks. u Oversized heavy shank and thread diameters for enhanced pullout resistance in light gauge steel roof decks. u Deep buttress threads further increase pullout resistance. u Miniature drill point penetrates decks quickly and contributes to exceptional resistance to backout as well as pullout Perlok CR-10 corrosion resistant coating exhibits less than 15% red rust after 30 Kesternich cycles. CR-10 coating exceeds F.M. Approval Standards The PERLOK EXTRA HEAVY DUTY ROOFING FASTENER should always be tested on site by an Olympic representative to determine performance and proper installation procedure. Call Olympic to schedule testing. Plates & Accessories A variety of plates are available. Contact Perlok to determine the appropriate plate for your application. Product Information The data provided is constant for each PERLOK EXTRA HEAVY DUTY ROOFING FASTENER. Head Diameter:.435 Thread Diameter:.275 Head Style: : #3 Phillips Truss CR-10 Cat. No. Thread Packaging Weight EHD002 2 Full lb EHD003 3 Full lb EHD lb EHD lb EHD lb EHD lb EHD lb EHD lb EHD lb EHD lb EHD lb
Perlok CR 1.2 Base Sheet Fastener Secure Base Sheets to Lightweight Insulating Concrete or Gypsum
Perlok CR 1.2 Base Sheet Fastener Secure Base Sheets to Lightweight Insulating Concrete or Gypsum u Uses THE PERLOK CR 1.2 BASE SHEET FASTENER is a one piece unit, precision formed from G-90 galvanized
More informationDEKFAST COMMERCIAL ROOFING FASTENERS
STEEL DECKING & UL DECKING ATTACHMENT FASTENERS Used for attachment of steel decking attachment to 12ga up to 1/2 thick steel purlin structures. #10 x 3/4 designed for steel B deck side lap stitch. The
More informationMULE-HIDE PRODUCTS CO., INC FASTENER GUIDELINES
FASTENER GUIDELINES Fastener Overview A. Mule-Hide offers a variety of fasteners and plates to: Attach roof insulation Attach mechanically fastened roofing membranes Secure All Purpose Bar and termination
More informationUL Construction No. 254
UL Construction No. Wind-Uplift - Class 90 (See Item No. ) / Fire Not Investigated Metal Roof Deck Panels* Snap-Clad No. MSG or No. MSG min. thickness coated steel panels. Panels in. wide max., 0 in. wide
More informationFOCUSING ON FASTENERS
FOCUSING ON FASTENERS 36 January 2010 www.professionalroofing.net MAKE INFORMED DECISIONS WHEN SELECTING FASTENERS BY JOAN P. CROWE, AIA Fasteners can be used with almost every roof system component and
More informationFASTENERS BUILDING DEPARTMENT
FASTENERS BUILDING DEPARTMENT 952-446-1660 WWW.CITYOFMINNETRISTA.COM This handout is intended only as a guide and is based in part on the 2015 Minnesota Residential Code, Minnetrista City ordinances, and
More informationCoatings ASTM B117 SST Salt Spray Test Kesternick Phosphate Zinc E-Coat Dip Spin Coatings
Head and Thread types Coatings ASTM B117 Two major types of coating tests: SST Salt Spray Test screws are placed in a container and a salt solution is sprayed on the screws for a number of hours, checking
More informationCOMPOSITE SIDING INSTALLATION GUIDE
CENTURY HOME LIVING COMPOSITE SIDING INSTALLATION GUIDE Read all instructions prior to installing any siding product. Failure to install and finish this product in accordance with all local building codes,
More informationFASTENERS QUIKDRILL QUIKGRIP CLIPSCREWS. Value through the Roof.
FASTENERS QUIKDRILL QUIKGRIP CLIPSCREWS Value through the Roof. METAL-TO-METAL FASTENERS for CANADA QUIKDRILL METAL2METAL Value through the Roof. Reliable Self-Drilling Performance. Superior Marco Value.
More informationMETAL-TO-METAL FASTENERS QUIKDRILL METAL2METAL METAL2METAL HD. Value through the Roof.
METAL-TO-METAL FASTENERS QUIKDRILL METAL2METAL METAL2METAL HD Value through the Roof. Reliable Self-Drilling Performance. Superior Marco Value. Value drives everything we do. That s why our exclusive Weather-Tite
More informationMETAL-TO-WOOD FASTENERS QUIKGRIP METAL2WOOD METAL2WOOD HD METAL2WOOD XD LOPRO 300SS. Value through the Roof.
METAL-TO-WOOD FASTENERS QUIKGRIP METAL2WOOD METAL2WOOD HD METAL2WOOD XD LOPRO 300SS Value through the Roof. Proven Performance. Huge Selection. Marco Quality. Value drives everything we do. That s why
More informationSheet Steel Facts. Most common head design for self-drilling, self-tapping screws.
Sheet Steel Facts Fastener Guide for Sheet Steel Building Products August, 2003 Fastener Materials Fasteners are manufactured from several materials and coatings. For the purpose of this fact sheet, the
More informationeco-shake INSTALLATION INSTRUCTION
1 eco-shake INSTALLATION INSTRUCTION NOTE: Shuffling the eco-shakes during installation may be necessary to obtain a uniform color throughout the roof. Due to the natural wood content in the ecoshakes,
More informationMetal Roof Installation Manual. Chapter 14: Fasteners
Metal Roof Installation Manual Chapter 14: Fasteners Chapter 14: Fasteners Chapter Contents 14. Introduction... 14-1 14.1 Fastener Parts and Installation... 14-1 14.1.1 Points... 14-1 14.1.2 Heads... 14-1
More informationAdorn Mortarless Stone Veneer Installation Natural Concrete Products
Adorn Mortarless Stone Veneer Installation Adorn Mortarless Stone Veneer can be used on new or existing construction. Adorn is nailed or screwed onto the wall; therefore no brick ledge is required. Adorn
More informationLow Slope Fastening Solutions Guide
Low Slope Fastening Solutions Guide Featuring Products & Systems Table of Contents Section Page General Information Dekfast Identification Convention...2 Fasteners #12 Phillips Head...3 #12 Hex Head...4
More informationFasteners Engineered for Cutting Edge Performance
?I Fasteners Engineered for Cutting Edge Performance 6357 Reynolds Road, Tyler, Texas 75708 P.O. Box 4515, Tyler, Texas 75712 800-352-4864 800-352-3940 Fax 903-592-2826 903-592-1583 Fax 9950 Princeton
More informationPRODUCT EVALUATION Effective July 1, 2009 RC-204
TEXAS DEPARTMENT OF INSURANCE Engineering Services / MC 103-3A 333 Guadalupe Street P.O. Box 149104 Austin, Texas 78714-9104 Phone No. (512) 322-2212 Fax No. (512) 463-6693 PRODUCT EVALUATION Effective
More informationThermoplastic Mechanically Fastened Roofing Systems Induction Welding (RhinoBond / Isoweld) Attachment Method. Attachment I
Thermoplastic Mechanically Fastened Roofing Systems Induction Welding (RhinoBond / Isoweld) Attachment Method Attachment I January 2017 This is an alternate method for securing the Carlisle s Sure-Weld
More informationMIAMI-DADE COUNTY PRODUCT CONTROL SECTION DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER)
MIAMI-DADE COUNTY PRODUCT CONTROL SECTION DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER) 11805 SW 26 Street, Room 208 BOARD AND CODE ADMINISTRATION DIVISION Miami, Florida 33175-2474 T (786) 315-2590
More informationTuff-Rib Install Guide
Install Guide bestbuymetalroof.com Page 2 of 27 Page 3 of 27 1. Page 4 2. a. Installation Guide b. Panel Squaring Pages 5, 6 Pages 7, 8 3. Pages 9, 10 4. a. Fascia (optional) b. Eave / 1.5x3.5 Angle c.
More informationUNA-CLAD Metal Roof Systems
UNA-CLAD Metal Roof Systems Underwriters Laboratories (UL) UL Roof Deck Constructions and P Assemblies Factory Mutual Approvals (FM) Table of Contents 1.01 EXTERNAL FIRE RATINGS... 7 Assemblies are updated.
More informationSubmittal Sheet. Product: Item# Description Unit Pack
Submittal Sheet Submittal Sheet #0309412 Bugle Head Screws (212) Product: Item# Description Unit Pack C368 6 x 1-1/4-in, Bugle Head, Fine Thread,, Phosphate, Collated 1,000 1268YZ 10 x 3-1/2-in, Bugle
More informationZXL MB Advantage Catalog. A Division of The Hillman Group
ZXL MB Advantage 2019 Catalog A Division of The Hillman Group?I ST Advantage...Value Added Innovation 6357 Reynolds Road, Tyler, Texas 75708 P.O. Box 4515, Tyler, Texas 75712 800-352-4864 800-352-3940
More informationGLOSSARY OF TERMS SECTION 8
GLOSSARY OF TERMS SECTION 8 Anchor Bolt Angle Base Plate Bay Blocking CCB Centerline Chord Cladding Clip Closure Strip An A-307 steel bolt embedded in the concrete footing to anchor the base plate of the
More informationNails, Fasteners, Connectors, and Framing
Nails, Fasteners, Connectors, and Framing Nails To order Nail Sizes Nail length is often referred to as d or penny. For example a 10-D nail or a 10 Penny Nail. Use the following chart for nail length reference.
More informationREPORT HOLDER: ISAIAH INDUSTRIES, INC. EVALUATION SUBJECT:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 1360 Reissued 08/2018 This report is subject to renewal 08/2019. DIVISION: 07 00
More informationWave Bike Rack specs SPECS AND INSTALL INSTRUCTIONS. Deluxe Wave Style Bike Rack. Series Names & Model # s. Product maintenance. Thermoplastic Coating
SPES ND INSTLL INSTRUTIONS Deluxe Wave Style ike Rack SKU: Series Names & Model # s 8 F7WIRQ InGround Post Mount Wave ike Racks Wave ike Rack specs KP/G3, KP/G5, KP/G7, KP/G9, KP/G11, KP/G13 Plate Surface
More information9Upgrades to Windproof Your Roof
9Upgrades to Windproof Your Roof Nail down the details to keep asphalt shingles where they belong By Mike Guertin Asphalt shingles are getting better all the time, but the elements can still get the best
More informationCSS Central Mount System
CSS-20 Installation Manual CSS-20 Safety Notifications Below are the installation instructions for the CSS-20-2 Long Span Beam Mounting System. Please read these safety notifications prior to beginning
More informationTable of Contents. Notes to Designer/User Map of Typical Roof Conditions Fastener Placement Fastener Selection...
Table of Contents Section Page Notes to Designer/User... 2-3 Map of Typical Roof Conditions... 4 Fastener Placement... 5 Fastener Selection... 6 Ridge/Hip Flashing... 7 Valley Flashing... 8 Eave Flashings...
More informationPULL TESTERS FOR FASTENER MEMBRANE FOAM TESTING
FOR FASTENER MEMBRANE FOAM TESTING Measuring force from Apple to Zipper COM-TEN provides both analog and digital pull testers, and has been doing more and more work with the building industry in USA and
More informationDura-Lock Roof System
DLR-14 Dura-Lock Roof System Assembly and Installation Instructions Read the instructions before starting the job. They explain the steps required to produce a finished product that will meet factory specifications.
More informationWithdrawal Strength of Staples
Holding Strength of Staples Staples are widely used in the furniture industry, both for upholstering purposes and for frame construction. The staples used for upholstering are usually rather small and
More informationCertainTeed INSTALLATION GUIDE SIMTEK FENCE PRODUCTS. Fence Installation Guide 3', 4' & 6' High
CertainTeed INSTALLATION GUIDE SIMTEK FENCE PRODUCTS Fence Installation Guide 3', 4' & 6' High INSTALLATION GUIDE These instructions are designed to assist both professional installers and do-it-yourselfers
More informationTOLL FREE:(888) FAX:(941) ASSEMBLY of ProTEC CONCRETE STRUCTURAL INSULATED PANEL
ASSEMBLY of ProTEC CONCRETE STRUCTURAL INSULATED PANEL The ProTEC panels are manufactured with grooves on all four sides to accept the steel components. This grooving applies to the regular panel whose
More informationPerimeter Edge Metal Brochure (COMGN296) Updated: 7/18
Perimeter Edge Metal Brochure (COMGN296) Updated: 7/18 PERIMETER EDGE METAL gaf.com Beautify and help save on labor costs by using consistent products that consistently perform GAF Perimeter Edge Metal
More informationImproving the Wind Resistance of Roof Systems: Asphalt Shingle Roofs
Improving the Wind Resistance of Roof Systems: Asphalt Shingle Roofs Relatively few homes receive severe structural damage from hurricane and other severe winds. Those few which are severely structurally
More informationEcoFasten Solar. Test Data: C Eco-44 Wood Blocking Product Guide. Engineer s Test Report - C B-44 Bracket Page 1. Page 2 5.
Test Data: C-102-6 Page 1 Page 2 5.1 Test Data: C-102-6 Page 3 Page 4 5.2 Test Data: C-102-6 Page 5 5.3 Test Data: Load Test Load Test Report (for reference only) Machine: Universal or tensile testing
More informationPAT installation of a Sun Dome over a in-ground
PAT. 3766573 Installation of Sun Domes for in-ground pool GENERAL INSTRUCTIONS: STEP 1. Read thru the entire instructional materials before beginning any installation. You will find that the installation
More informationSECTION PVC THATCH SHINGLE ROOFING SYSTEM PART 1 GENERAL 1.01 SUMMARY
SECTION 07312 PVC THATCH SHINGLE ROOFING SYSTEM PART 1 GENERAL 1.01 SUMMARY A. This Section Includes the following: 1. Endureed Dominica PVC thatch shingles. 2. Self- adhering sheet underlayment. B. Related
More informationFASTENERS C O M P AT I B L E W I T H F E R O T I E S Y S T E M S. Which FERO Tie Systems Require Fasteners?
FASTENERS C O M P AT I B L E W I T H F E R O T I E S Y S T E M S Which FERO Tie Systems Require Fasteners? Structural Actions: Fastener,, or Both? With the exception of FERO tie systems that are directly
More informationSECTION MASONRY ANCHORAGE AND REINFORCEMENT. Display hidden notes to specifier. (Don't know how? Click Here)
PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 04080 MASONRY ANCHORAGE AND REINFORCEMENT Display hidden notes to specifier. (Don't know how? Click Here) A. Post installed masonry anchors. B. Miscellaneous
More informationSCREW FASTENER SELECTION FOR COLD-FORMED STEEL FRAME CONSTRUCTION
test TECHNICAL NOTE On Cold-Formed Steel Construction $5.00 Cold-Formed Steel Engineers Institute Washington, DC www.cfsei.org 866-465-4732 SCREW FASTENER SELECTION FOR COLD-FORMED STEEL FRAME CONSTRUCTION
More informationInstallation Manual for Thermo Panel
Installation Manual for Thermo Panel 1 About Thermo Panel is a building wrap, insulation, air and water barrier, mold inhibitor and cold bridge eliminator all-in-one. Delivering an R-value of up to 5 on
More informationROOF FLASHING FEATURES & BENEFITS PRODUCT DESCRIPTION
SPRINGLOK SYSTEM PRODUCT DESCRIPTION FEATURES & BENEFITS Fry Reglet offers five flashing systems, each tailored for a particular type of substrate so you can get exactly what you need. SM Surface mounted
More informationElco Construction Products 1301 Kerr Drive Decorah, IA fax:
Technical Manual 2010 HangerMate anchors were designed to speed installation of fire sprinkler, HVAC, refrigeration, general piping, and electrical systems. They can also be used to install strut channels,
More informationSECTION CONCRETE ANCHORING. Display hidden notes to specifier. (Don't know how? Click Here)
PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 03 15 00 CONCRETE ANCHORING Display hidden notes to specifier. (Don't know how? Click Here) A. General purpose mechanical anchors for horizontal and vertical
More informationUltraCon Masonry Fasteners High Performance in a Wide Range of Applications
UltraCon Masonry Fasteners High Performance in a Wide Range of Applications The UltraCon masonry fastening system from Elco Construction Products offers optimal performance in a wide range of masonry applications.
More informationTuff-Rib. Installation Manual. Nationwide supplier of quality metal roofing. Toll-Free (800) S. Lee Hwy. Cleveland, TN 37311
Installation Manual Nationwide supplier of quality metal roofing. 65 S. Lee Hwy. Cleveland, TN 7.. www.bestbuymetals.com Toll-Free (800) 78-00 IMPORTANT NOTICE This manual contains suggestions and guidelines
More informationUltraCon Masonry Fasteners High Performance in a Wide Range of Applications
UltraCon Masonry Fasteners High Performance in a Wide Range of Applications The UltraCon masonry fastening system from Elco Construction Products offers optimal performance in a wide range of masonry applications.
More informationSDWH TIMBER-HEX Screw
Simpson Strong-Tie Fastening Systems Structural Wood-to-Wood Connections, Including Ledgers Double-barrier coating provides corrosion resistance equivalent to hot-dip galvanization, making it suitable
More informationGCN150 Gas-Actuated Concrete Nailer
GCN0 Gas-Actuated Concrete Nailer The GCN0 gas-actuated concrete nailer is a portable fastening tool for attaching light-duty fixtures such as drywall track, furring strips, hat track and angle track to
More informationAttach Trusses and Rafters Faster
Attach Trusses and Rafters Faster SDWC TRUSS Screw Truss-to-Plate Connections For Truss-to-Plate Connections The Strong-Drive SDWC TRUSS screw provides a truss- and rafter-to-top-plate connection. The
More informationANCHORS SLEEVE ANCHORS BOLT DIAMETER
SLEEVE ANCHORS No hole spotting. No mis-alignments. Simply drill through the fixture into concrete, insert and tighten. Preassembled for fast, easy installation. No special tools necessary; meets federal
More informationICC-ES Evaluation Report Reissued June 1, 2010 This report is subject to re-examination in one year.
ICC-ES Evaluation Report ESR-2648 Reissued June 1, 2010 This report is subject to re-examination in one year. www.icc-es.org (800) 423-6587 (562) 699-0543 A Subsidiary of the International Code Council
More informationBUILDING FASTENERS METAL TO WOOD FASTENERS
BUILDING FASTENERS METAL TO WOOD FASTENERS PAINT + TESTING PaintingOptions MATCHTECH The world s best fasteners now in any color, any time. MatchTech is Marco Industries stateofthe art, high quality polyurethane
More informationIntex Engineered Pergola System Installation Instructions. NOTE: See Appendix for Foundation Requirements
Intex Engineered Pergola System Installation Instructions NOTE: See Appendix for Foundation Requirements Pergola Installation, Freestanding (If pergola will be attached-to-structure, skip to page 3) 1.
More informationMSP-WRTIDSKY1 Light Weight Suspended Ceiling Kit for use with Island Display Skybox
INSTALLATION INSTRUCTIONS MSP-WRTIDSKY1 Light Weight Suspended Ceiling Kit for use with Island Display Skybox The MSP-WRTIDSKY1 Light Weight Suspended Ceiling Kit provides a sturdy support for LCD displays
More informationFastening Systems L.P. 12/11/2013 EJOT Fastening Systems L.P. 1
Fastening Systems L.P. 12/11/2013 EJOT Fastening Systems L.P. 1 Solar Fastening Systems 12/11/2013 EJOT Fastening Systems L.P. 2 What has to be considered? - The installation of a solar system increases
More informationESR-2648 Reissued May 1, 2012 This report is subject to renewal June 1, 2013.
ICC-ES Evaluation Report ESR-2648 Reissued May 1, 2012 This report is subject to renewal June 1, 2013. www.icc-es.org (800) 423-6587 (562) 699-0543 A Subsidiary of the International Code Council DIVISION:
More informationSigma Fasteners, Inc. Section 7
DESCRIPTION PAGE s Wedge s 7-1 Drop-In s 7-2 Single Expansion s 7-2 Machine Screw s 7-2 Lag Shields 7-3 Lead Wood Screw s 7-3 Hammer Drive s 7-4 Hollow Wall Fasteners 7-5 Toggle Bolts 7-6 Toggle Wings
More informationAttachment of Residential Deck Ledger to Side of Metal Plate Connected Wood Truss Floor Ladder. Installation Instructions Revised 9/2/2016
Attachment of Residential Deck Ledger to Side of Metal Plate Connected Wood Truss Floor Ladder Installation Instructions Revised 9/2/2016 SBCA has been the voice of the structural building components industry
More informationFastener Schedule. a, b, c. FASTENER Roof 3-8d (2 1 / ) / ) 3-10d. 3-10d ( ) 3-16d box nails. (3 1 2 toe nails on one side
ITEM 1 DESCRIPTION OF BUILDING ELEMENTS Blocking between joists or rafters to top plate, toe 2 Ceiling joists to plate, toe 3 4 5 6 Ceiling joists not attached to parallel rafter, laps over partitions,
More informationTECHNICAL GUIDE BEONSTONE PANELIZED STONE SIDING
TECHNICAL GUIDE BEONSTONE PANELIZED STONE SIDING TABLE OF CONTENTS This installation guide provides detailed step-by-step instructions for do-it-yourself projects. We invite you to read it carefully and
More informationCIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD METAL SCREWS. 6 x 3/4 P/N x 1 METAL SCREW P/N x 3/4 METAL SCREW
A21-1 1160 CIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD S For light duty applications in solid materials Color coded diameters for easy identifi cation Acid resistant NYLON FLANGED:
More informationUse the Design Properties (100% Load Duration) Table from Page 3 for questions 1-7
www.garyklinka.com page 1 of 16 Truss Joist I-Joist Quiz Instructions: www.garyklinka.com 1. Print these pages. 2. Print referencing manual from my site at http://garyklinka.com/manuals/tj-4000.pdf or
More information50948-RHN Putney. 06 January This document includes: Aluminium strip/ sheet coverings/ flashings 1. Code Section Revision Dated
50948-RHN Putney 06 January 2018 This document includes: Code Section Revision Dated H72 Aluminium strip/ sheet coverings/ flashings 1 Table of Contents Title H72 Aluminium strip/ sheet coverings/ flashings
More informationFastener Design. Fastener Materials. Coated Corrosion-Resistant Fasteners. Metal Alloy Capped Fasteners
Threaded fasteners for roofing and siding systems are available in a wide range of materials, designs, and coatings. When specifying your fastener, be sure to choose one that has a performance life equaling
More informationInspire Aledora Slate Application Guidelines
July 2014 Inspire Aledora Slate Application Guidelines Only Basic Roofing Tools Required Hand fastened or fastened with a pneumatic nail gun Utility knife or a standard circular saw Tape measure, pry bar,
More informationWood Connections. Presented by: Karyn Beebe, P.E.
Wood Connections Presented by: Karyn Beebe, P.E. Key to Connections 1. Wood has a strong and weak direction 2. Wood Moves 3. Strive for Consistency 4. Wood and Moisture Don t Mix 5. Load Path Continuity
More informationPRIMED STRAND REVERSIBLE SHAKE
PRIMED STRAND REVERSIBLE SHAKE PRIOR TO INSTALLATION Inspect product for any issues before installing (breakage, surface defects, foreign objects). Do not install questionable product. Report any problems
More informationKOLO SHELTER Installation Instructions Parts List
Parts List Roof Cap Rafter Upright Polycarbonate Polycarbonate Drop Polycarbonate Flange Center Weldment (Short length shown above) Polycarbonate Edge Bolt.25 x 6.5 Bolt.625 x 7.5 Threaded Rod.75 x 14
More informationEngineering Services Program
Product Evaluation Engineering Services Program The following product has been evaluated for compliance with the wind loads specified in the International Residential Code (IRC) and the International Building
More informationLoad Tables, Technical Data and Installation Instructions
W22. W22. W22. W22. W22 W22.. Simpson Strong-Tie Fastening Systems Structural Wood-to-Wood Connections Including Ledgers Designed to provide an easy-to-install, high-strength alternative to through-bolting
More informationLetter of Transmittal/Submittal
Letter of Transmittal/Submittal FROM: TO: Baker Concrete Construction 1904 Jasper Street DATE JOB NUMBER 09/23/10 Aurora, CO 80011 9921 303.367.8111 ATTENTION Nick Dewald 937.536.9000 RE: Bruce Herman
More informationEkoroof LiteTile Dimensions
Ekoroof LiteTile Dimensions 7 3 3.5 Height 40 Width 20 Length Weight per Panel: 3 kg / 6.61 lbs 2 2 Area per panel 800 in / 5.55 ft 2 Panels per Square: 20 (including overlap, for a 100 ft covered area)
More informationDUTCH GABLE FREESTANDING CARPORT
DUTCH GABLE FREESTANDING CARPORT STRATCO OUTBACK ASSEMBLY INSTRUCTIONS. Your complete guide to building a FREESTANDING Outback DUTCH GABLE CARPORT BEFORE YOU START Carefully read these instructions. If
More informationFive Star Panel Installation Instructions
Five Star Panel Installation Instructions How to Store Five Star Panels You will need to store FIVE STAR PANELS in dry place to prevent staining, deterioration and possibly void all warranties. Stand the
More informationTop Closure Kit Accessory for Music Library System
Assembly Instructions Top Closure Kit Accessory for Music Library System Contents Required Tools.....................................2 Installation Requirements............................2 Fasteners -
More informationLeveling Feet, Base Plates and Casters
Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.
More informationSECTION BULLET- RESISTANT DOORS
1 SECTION 08 3950 BULLET- RESISTANT DOORS PART 1- GENERAL 1.01 SUMMARY A. This Section Includes: 1. Bullet- resistant steel door and frame systems. 2. Door hardware for bullet- resistant steel door and
More informationPRODUCT INFORMATION Penco Wide-Span Shelving
PRODUCT INFORMATION Penco Wide-Span Shelving 2946 Larimer St. Denver, CO 80205 303-295-1100 / 800-373-7693 FAX 303-295-2464 Email info@snyderequipment.com www.snyderequipment.com Wide Span Shelving Penco
More informationInstallation Guide. Capped Cellular PVC Fencing. Table of Contents. Storage and Handling Tools Needed Fence Layout and Locating Posts
Capped Cellular PVC Fencing Installation Guide Table of Contents Storage and Handling Tools Needed Fence Layout and Locating Posts Installation instructions 4 x 4 Over Sleeve Post - 3.5 Rail Privacy Shadowbox
More informationDIRECT FASTENING SYSTEMS. Hilti. Outperform. Outlast.
DIRECT FASTENING SYSTEMS. Hilti. Outperform. Outlast. Powder-Actuated Tools and Fasteners DX - Light Tools DX 460-F8 Page 140 DX 460 MX Page 141 Consumables X-U, X-C, X-FS, X-HS U, X-M, X-EM Page 142 Insulation
More informationPROJECT INSTRUCTIONS Roofing
PROJECT INSTRUCTIONS Roofing This handout outlines some basic regulations contained within the 2015 Minnesota State Building Code, as well as other good building practices. However, this handout is not
More informationGeneral Installation Guidelines
g e n e r a l i n s t a l l a t i o n g u i d e l i n e s General Installation Guidelines Although Nutec Building Planks do not contain asbestos fibres, it is nevertheless recommended that when working
More informationOhlson Project Property Owner: Kathy Ohlson Property Address: Deer Lake Rd. Derwood MD 20855
Ohlson Project Property Owner: Kathy Ohlson Property Address: 16116 Deer Lake Rd. Derwood MD 20855 Trademark LLC Prepared By: Travis Murphy Drawing Index 1. Cover 2. Rear Elevation 3. Top View 4. Dimensions
More informationMulti-Set II Drop-In Anchors
CONCRETE ANCHORING SPECIALISTS Internally Threaded Heavy- Duty Anchoring Systems DESCRIPTION/SUGGESTED SPECIFICATIONS Drop-In, Shell-Type Anchors SPECIFIED FOR ANCHORAGE INTO CONCRETE Drop-In, shell-type
More informationNON-PENETRATING ROOFTOP HANGERS AND SUPPORTS
SECTION 15062 NON-PENETRATING ROOFTOP HANGERS AND SUPPORTS For best results, display hidden notes to specifier. PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe supports. B. Conduit supports. C. Duct supports,
More informationeb^sv=qfj_bo UNIVERSITY OF WISCONSIN - STOUT COLLEGE OF SCIENCE TECHNOLOGY ENGINEERING & MATHEMATICS Architectural Technology AEC 233
eb^sv=qfj_bo UNIVERSITY OF WISCONSIN - STOUT COLLEGE OF SCIENCE TECHNOLOGY ENGINEERING & MATHEMATICS Architectural Technology AEC 233 Dr. Jason E. Charalambides fkqolar`qflk Heavy timber construction consists
More informationRe-Roofing Policy SPECIAL REQUIREMENTS AND NOTES
CITY OF MANTECA COMMUNITY DEVELOPMENT DEPARTMENT 1001 West Center Street Manteca, CA 95337 FAX (209) 923-8949 Building Safety Division (209) 456-8550 Planning Division (209) 456-8500 Public Works/Engineering
More informationMIAMI-DADE COUNTY PRODUCT CONTROL SECTION DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER)
MIAMI-DADE COUNTY PRODUCT CONTROL SECTION DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER) 11805 SW 26 Street, Room 208 BOARD AND CODE ADMINISTRATION DIVISION Miami, Florida 33175-2474 T (786) 315-2590
More informationPergola Installation Guide. When only the best will do.
Pergola Installation Guide When only the best will do. Tools Needed Installation Tools for assembly Drill(s) Miter or Circular Saw with carbide blade (cut slowly) 5 /8" Drill Bit 5 /16" Magnetic Driver
More informationREPORT HOLDER: SFS INTEC 1045 SPRING STREET WYOMISSING, PENNSYLVANIA EVALUATION SUBJECT:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3870 Reissued 01/2018 This report is subject to renewal 01/2019. DIVISION: 05 00
More informationFLOOR ANCHOR SYSTEM APPLICATIONS L TRACK APPLICATIONS
FLOOR ANCHOR SYSTEM APPLICATIONS Sure-Lok recommends the following for floor anchor system layout and installation. These recommendations are not all-inclusive and may not be applicable to every system
More informationNailbiter Premium Ship Auger Bits. RESI-MASTER Heavy-Duty Ship Augers
Nailbiter Premium Ship Auger Bits Dual-Helix construction with twin cutting edges for faster and smoother drilling action, even through nail-embedded timbers Full body, dual induction heat treatment ensures
More informationKuraStone TM Installation Guide
Installation Guide Read these installation guidelines completely and thoroughly before beginning installation. Construction Requirements KuraStone pieces can be installed on braced wood or steel stud (18
More informationJOIST DETAILS Plate nail, 16d (0.15" x 1 ") at 1 on-center Blocking panel: 1 1 8" TJ Rim Board, 1 1 TimberStrand SL or TJI joist Toe nail, 10d (0.11" x ") at on-center A1 CS BEAM DETAILS L1 eb stiffener
More informationLENGTH IDENTIFICATION
58 Power-Bolt HEAVY DUTY, ELF-UNDERCUTTING LEEVE TYPE BAE MATERIAL Concrete, Block, Brick, tone IZE RANGE 1/4" x 1" to 1-1/4" x 9 MATERIAL LENGTH IDENTIFICATION The Power-Bolt anchor has a length identification
More information