The Carbide Integral Type Arbor for High Efficient Machining. Red Screw Arbor BT-RSG, A-RSG. Red Screw Arbor. New Product News No.

Size: px

Start display at page:

Download "The Carbide Integral Type Arbor for High Efficient Machining. Red Screw Arbor BT-RSG, A-RSG. Red Screw Arbor. New Product News No."

Hugh Dean
5 years ago
Views:

1 The Carbide Integral Type Arbor for High Efficient Machining. Red crew Arbor BT-RG, A-RG Red crew Arbor New Product News No.2E

Displaying the highest cutting performance of any Modular Mill!

properties (high Young's modulus). 02 Carbide, integral type eliminates slipping.

04 Compatible with center-through coolant Compatible with various modular tools GF1 GP1LB

2 Displaying the highest cutting performance of any Modular Mill! Features of Red crew Arbor 01 Highly rigid design makes the best use of Carbide alloy properties (high Young's modulus). 02 Carbide, integral type eliminates slipping. 03 Without chatter for deep standing-wall machining. 04 Compatible with center-through coolant Compatible with various modular tools GF1 GP1LB GP1T GF2T TD4N-M ARFM ARM ARTM ARM 多刃タイプ ARM RV-M AHUM AMM RH2P-M AHJM ARPFM BCFM ABPFM APVM Many effective lengths for machining (M) Heavy cutting Deep standing-wal machining 02

3 Line Up BT eries expanded to include many different effective lengths BT ー RG1-400 ー M2 φc1 φc φc2 Option Retention knob Caution (μm / kgf) P. 7 Dimensions for the Modular Mill mounting L1 5 L G M H 10 H1 φd ome of the indexable end mills cannot be attached to the RED screw arbor. Please check your indexable end mills for conformance to the dimensions, or please contact Mitsubishi Hitachi Tool Engineering, Ltd. Because cutting resistance is greater than the tool holder connection force associated with the machine spindle, please reduce the recommended cutting conditions by % for the RED screw arbors marked with. Otherwise, the tool holder shank may experience fretting corrosion or fall out of the machine spindle. BT40 BT G φd H H1 φc L M L1 φc1 φc2 (kg) BT40-RG8--M BT40-RG8-135-M BT40-RG8--M BT40-RG8--M BT40-RG8-10-M BT40-RG8--M BT40-RG8-5-M BT40-RG8-5-M BT40-RG8-2-M BT40-RG8--M90 BT40-RG8--M90 BT40-RG8--M90 BT40-RG8-5-M BT40-RG8-2-M BT40-RG8--M BT40-RG10-1-M BT40-RG10-5-M BT40-RG10-5-M BT40-RG10-1-M BT40-RG10-0-M BT40-RG M BT40-RG10-1-M BT40-RG10--M BT40-RG10--M BT40-RG10--M BT40-RG10--M BT40-RG10-20-M BT40-RG10-0-M BT40-RG10-0-M BT40-RG10-2-M BT40-RG12-1-M BT40-RG12-5-M BT40-RG12-5-M BT40-RG12-1-M BT40-RG12-0-M BT40-RG M BT40-RG12-1-M BT40-RG12--M BT40-RG12--M BT40-RG12--M BT40-RG12--M BT40-RG12-20-M BT40-RG12-2-M1 BT40-RG12-5-M1 BT40-RG M1 BT40-RG1-1-M BT40-RG1-1-M BT40-RG1-1-M BT40-RG1--M BT40-RG1-2-M1 BT-RG8--M BT-RG8-1-M BT-RG8-0-M BT-RG8--M BT-RG8-1-M BT-RG8--M BT-RG8--M BT-RG8--M M10 M12 M

4 G L M φd φc H H1 L1 φc1 φc2 (kg) 04 BT M10 M12 M BT BT-RG8--M BT-RG8-5-M90 BT-RG8-2-M90 BT-RG8--M90 BT-RG8--M BT-RG8--M BT-RG8-20-M BT-RG10--M BT-RG10--M BT-RG10--M BT-RG10--M BT-RG10-1-M BT-RG10-2-M BT-RG10--M BT-RG10-0-M BT-RG10-0-M BT-RG10-2-M BT-RG10--M BT-RG10-2-M BT-RG10--M BT-RG10-25-M BT-RG10-2-M BT-RG10-5-M BT-RG M BT-RG10-3-M BT-RG12--M BT-RG12--M BT-RG12--M BT-RG12--M BT-RG12-1-M BT-RG12-2-M BT-RG12--M BT-RG12-0-M BT-RG12-0-M BT-RG12-2-M BT-RG12--M BT-RG12-2-M BT-RG12--M1 BT-RG12--M1 BT-RG12-0-M1 BT-RG12-25-M1 BT-RG12-2-M1 BT-RG12-3-M1 BT-RG12--M1 BT-RG12-0-M1 BT-RG12-3-M1 BT-RG1--M BT-RG1--M BT-RG1--M BT-RG1--M BT-RG1-1-M BT-RG1-2-M BT-RG1--M BT-RG1-0-M BT-RG1-0-M BT-RG1-2-M BT-RG1--M BT-RG1-2-M BT-RG1--M1 BT-RG1--M1 BT-RG1-0-M1 BT-RG1-25-M1 BT-RG1-2-M1 BT-RG1-3-M1 BT-RG1--M1 BT-RG1-0-M1 BT-RG1-3-M1 BT-RG1-3-M BT-RG1-345-M BT-RG1-3-M BT-RG1-340-M2 BT-RG1-370-M2 BT-RG1-400-M2 Line Up

5 HK-A eries expanded to include many different effective lengths A3-RG10-1-M φc2 φc1 φc Option Coolant duct Caution (μm / kgf) P. 7 Dimensions for the Modular Mill mounting L1 5 L G M H 10 H1 φd ome of the indexable end mills cannot be attached to the RED screw arbor. Please check your indexable end mills for conformance to the dimensions, or please contact Mitsubishi Hitachi Tool Engineering, Ltd. Because cutting resistance is greater than the tool holder connection force associated with the machine spindle, please reduce the recommended cutting conditions by % for the RED screw arbors marked with. Otherwise, the tool holder shank may experience fretting corrosion or fall out of the machine spindle. A3 G φd H H1 φc L M L1 φc1 φc2 (kg) A3-RG8--M A3-RG8-135-M A3-RG8--M A3-RG8--M A3-RG8-10-M A3-RG8--M A3-RG8-5-M A3-RG8-5-M A3-RG8-2-M A3-RG8--M90 A3-RG8--M90 A3-RG8--M90 A3-RG8-5-M A3-RG8-2-M A3-RG8--M A3-RG10-1-M A3-RG10-5-M A3-RG10-5-M A3-RG10-1-M A3-RG10-0-M A3-RG M A3-RG10-1-M A3-RG10--M A3-RG10--M A3-RG10--M A3-RG10--M A3-RG10-20-M A3-RG10-0-M A3-RG10-0-M A3-RG10-2-M A3-RG10--M A3-RG10--M A3-RG10-0-M A3-RG12-1-M A3-RG12-5-M A3-RG12-5-M A3-RG12-1-M A3-RG12-0-M A3-RG M A3-RG12-1-M A3-RG12--M A3-RG12--M A3-RG12--M A3-RG12--M A3-RG12-20-M A3-RG12-2-M1 A3-RG12-5-M1 A3-RG M1 A3-RG12-0-M1 A3-RG12-2-M1 A3-RG M1 A3-RG1--M A3-RG1--M A3-RG1--M A3-RG1-2-M A3-RG1--M1 A3-RG1-25-M1 A3-RG1--M1 M10 M12 M

6 G L M φd φc H H1 L1 φc1 φc2 (kg) 0 HK-A M10 M12 M A A-RG8--M A-RG8-1-M A-RG8-0-M A-RG8--M A-RG8-1-M A-RG8--M A-RG8--M A-RG8--M A-RG8--M A-RG8-5-M90 A-RG8-2-M90 A-RG8--M90 A-RG8--M A-RG8--M A-RG8-20-M A-RG10--M A-RG10--M A-RG10--M A-RG10--M A-RG10-1-M A-RG10-2-M A-RG10--M A-RG10-0-M A-RG10-0-M A-RG10-2-M A-RG10--M A-RG10-2-M A-RG10--M A-RG10-25-M A-RG10-2-M A-RG10-5-M A-RG M A-RG10-3-M A-RG12--M A-RG12--M A-RG12--M A-RG12--M A-RG12-1-M A-RG12-2-M A-RG12--M A-RG12-0-M A-RG12-0-M A-RG12-2-M A-RG12--M A-RG12-2-M A-RG12--M1 A-RG12--M1 A-RG12-0-M1 A-RG12-25-M1 A-RG12-2-M1 A-RG12-3-M1 A-RG12--M1 A-RG12-0-M1 A-RG12-3-M1 A-RG1--M A-RG1--M A-RG1--M A-RG1--M A-RG1-1-M A-RG1-2-M A-RG1--M A-RG1-0-M A-RG1-0-M A-RG1-2-M A-RG1--M A-RG1-2-M A-RG1--M1 A-RG1--M1 A-RG1-0-M1 A-RG1-25-M1 A-RG1-2-M1 A-RG1-3-M1 A-RG1--M1 A-RG1-0-M1 Line Up, Field data

HK-A A G φd H H1 φc L M L1 φc1 φc2 (kg) A-RG 1-3-M1 A-RG 1-3-M A-RG 1-345-M A-RG 1-3-M A-RG 1-340-M2 A-RG 1-370-M2 A-RG 1-400-M2 M1 17 29 3 3 345 3 340 370 400 1 2 1 1 1 1 1 52 54 7.0 5.5.0 7.2.3 7.

The smaller the numerical value is, the higher the rigidity and the more accurate the machining. 1kgf (9.

long.a RED screw arbor demonstrates its superior cutting performance as compared to a combination of a general holder and a steel shank.

7 HK-A A G φd H H1 φc L M L1 φc1 φc2 (kg) A-RG 1-3-M1 A-RG 1-3-M A-RG M A-RG 1-3-M A-RG M2 A-RG M2 A-RG M2 M About the rigidity value A rigidity value represents the amount of deflection for the entire holder and tool when a bending load of 1 kgf (9.8 N) is applied to the tip of the tool. The smaller the numerical value is, the higher the rigidity and the more accurate the machining. 1kgf (9.8N) Field data A carbide, integrated-type RED screw arbor is highly rigid with low deflection, achieving machining without chatter even for deep standing-wall machining in which tool projection is long.a RED screw arbor demonstrates its superior cutting performance as compared to a combination of a general holder and a steel shank. A genral holder φ82 φ A steel shank teel RED screw arbor BT ー RG12-2-M φ45 φ 135 Increase rigidity Carbide, integral type Cutting Conditions ae φ mm (. 24 ") Deflection Amount =3μm =1μm Deflection Amount 2 flute end-mill Down cut milling Feed:0.1mm/t Material ae 4 (mm) ae 4 (mm) Excellent Chattering vc (m/min) vc (m/min) 07

8 The diagrams and table data are examples of test results, and are not guaranteed values. "Epoch" and are registered trademarks of Mitsubishi Hitachi Tool Engineering, Ltd. in Japan. Attentions on afety 1. Cautions regarding handling (1) When removing the tool from its case (packaging), be careful that the tool does not pop out or is dropped. Be particularly careful regarding contact with the tool flutes. (2) When handling tools with sharp cutting flutes, be careful not to touch the cutting flutes directly with your bare hands. 2. Cautions regarding mounting (1) Before use, check the outside appearance of the tool for scratches, cracks, etc. and that it is firmly mounted in the collet chuck, etc. (2) If abnormal chattering, etc. occurs during use, stop the machine immediately and remove the cause of the chattering. 3. Cautions during use (1) Before use, confirm the dimensions and direction of rotation of the tool and milling work material. (2) The numerical values in the standard cutting conditions table should be used as criteria when starting new work. The cutting conditions should be adjusted as appropriate when the cutting depth is large, the rigidity of the machine being used is low, or according to the conditions of the work material. (3) Cutting tools are made of a hard material. During use, they may break and fly off. In addition, cutting chips may also fly off. ince there is a danger of injury to workers, fire, or eye damage from such flying pieces, a safety cover should be attached when work is performed and safety equipment such as safety goggles should be worn to create a safe environment for work. (4) There is a risk of fire or inflammation due to sparks, heat due to breakage, and cutting chips. Do not use where there is a risk of fire or explosion. Please caution of fire while using oil base coolant, fire prevention is necessary. (5) Do not use the tool for any purpose other than that for which it is intended. 4. Cautions regarding regrinding (1) If regrinding is not performed at the proper time, there is a risk of the tool breaking. Replace the tool with one in good condition, or perform regrinding. (2) Grinding dust will be created when regrinding a tool. When regrinding, be sure to attach a safety cover over the work area and wear safety clothes such as safety goggles, etc. (3) This product contains the specified chemical substance cobalt and its inorganic compounds. When performing regrinding or similar processing, be sure to handle the processing in accordance with thelocal laws and regulations regarding prevention of hazards due to specified chemical substances. Head Office Hulic Ryogoku Bldg. 8F, , Ryogoku, umida-ku, Tokyo, -002 Japan International ales Dept. : TEL FAX Official Web ite Database for selection Cutting Tool Products TOOL EARCH earch Web Europe MMC Hitachi Tool Engineering Europe GmbH Itterpark 12, Hilden,Germany. Tel +49-(0) Fax +49-(0) China MMC Hitachi Tool Engineering(hanghai),Ltd. Room 204-, Metro Plaza, 555 Loushanguan Road, Changning Disctrict, hanghai, 051, CHINA Tel +8-(0) Fax +8-(0) America Mexico MITUBIHI MATERIAL U..A. CORPORATION DETROIT OFFICE Customer service 40 Gardenbrook Road, uite, Novi, MI U..A. Tel +1(248) 8- Fax +1(248) CHICAGO OFFICE 1314B North Plum Grove Road, chaumburg, IL 0173 U..A. Tel +1(847) Fax +1(248) MMC METAL DE MEXICO,.A. DE C.V. IAv. La Cañada No.1, Parque Industrial Bernardo Quintana, El Marques, Querétaro, CP 724, México Tel Thailand India MMC Hardmetal(Thailand)Co.,Ltd. HT-Division CTI Tower 24 Floor, 191/ Ratchadapisek Road, Klongtoey, Klongtoey, Bangkok 10, Thailand Tel: +-(0)2-1-8 Fax: +-(0) Hitachi Metals (India) Pvt. Ltd. Plot No 94 &,ector 8, IMT Manesar,Gurgaon-10, Haryana, India Tel Fax DITRIBUTED BY: pecifications for the products listed in this catalog are subject to change without notice due to replacement or modification. Printed using vegetable oil ink. Printed in JAPAN (K) :FP

Epoch CFRP series ECH/X-SD, ECN/W-HD. Epoch CFRP End Mill, Epoch CFRP Trim Cutter. New Product News No.1403E

Epoch CFRP series ECH/X-SD, ECN/W-HD Epoch CFRP End Mill, Epoch CFRP Trim Cutter New Product News No.10E- 017-7 Adopt special flute shape reduces cutting force. Achieves the improvement of machining efficiency