DTC. Digital Timber Construction New Possibilities with Digital Technology. Jun. Prof. Dr. Christopher Robeller Architect BYAK
|
|
|
- Lee Reed
- 5 years ago
- Views:
Transcription
1 Digital Timber Construction New Possibilities with Digital Technology Jun. Prof. Dr. Christopher Robeller Architect BYAK DTC Digital Timber Construction DTC Jun. Prof. Dr. Christopher Robeller TU Kaiserslautern, Faculty of Architecture
2
3
4
5 Beam Beam - Plate Plate - Plate 33. B.C
6 Buri, H. Origami Folded Plate Structures, EPFL IBOIS
7 Cutting Template Assembly Template Buri, H. Origami Folded Plate Structures, EPFL IBOIS
8 Hinged Joints Rigid Joints Buri, H. Origami Folded Plate Structures, EPFL IBOIS Hahn, B. Analyse eines räumlichen Tragwerks aus Brettsperrholz, EPFL IBOIS 2009
9 4 x 35
10 140 x 1
11 Mass Production Individualised Production
12 Mass Production Individualised Production
13 Integral Assembly Guide + Connector
14 Wood Cross-laminated wood Only across finer All sides!
15 Roche, Robeller, Humbert, Weinand, On the semi Rigidity of Dovetails, EJWP 2014
16 v only if vector in both planes v? 3x v v Robeller C. PhD Thesis, 2015
17 Robeller C. PhD Thesis, 2015
18 3x S 1 E 1 S 2 E 2 S 1 S 2 S 3 S 3 E 3 v Robeller C. and Weinand Y. Interlocking Folded Plate, in Int. Journal of Space Structures, 2015
19 Robeller C. PhD Thesis, 2015
20 Robeller C. PhD Thesis, 2015
21 Robeller C. PhD Thesis, 2015
22 z y x Robeller C. and Weinand Y. Interlocking Folded Plate, in Int. Journal of Space Structures, 2015
23
24 Robeller C. and Weinand Y. Interlocking Folded Plate, in Int. Journal of Space Structures, 2015
25 UHPFRC Folded Plate, IABSE Geneva 2015
26 Double Through Tenon Robeller and Weinand, Fabrication Aware Design of Folded Plate Structures with Doublethrough tenon joints, in Robotic Fabrication in Architecture 2016 Through Tenon
27 Robeller and Weinand, Fabrication Aware Design of Folded Plate Structures with Doublethrough tenon joints, in Robotic Fabrication in Architecture 2016
28 Robeller and Weinand, Fabrication Aware Design of Folded Plate Structures with Doublethrough tenon joints, in Robotic Fabrication in Architecture 2016 D
29 Robeller and Weinand, Fabrication Aware Design of Folded Plate Structures with Doublethrough tenon joints, in Robotic Fabrication in Architecture 2016
30 Robeller and Weinand, Fabrication Aware Design of Folded Plate Structures with Doublethrough tenon joints, in Robotic Fabrication in Architecture 2016
31 Robeller, C., Gamerro, J. and Weinand, Y. (2017). Théâtre Vidy Lausanne - A Double-Layered Timber Folded Plate Structure. Journal of the International Association for Shell and Spatial Structures, 58, , DOI: /j.iass
32 Robeller, C., Gamerro, J. and Weinand, Y. (2017). Théâtre Vidy Lausanne - A Double-Layered Timber Folded Plate Structure. Journal of the International Association for Shell and Spatial Structures, 58, , DOI: /j.iass
33 Robeller, C., Gamerro, J. and Weinand, Y. (2017). Théâtre Vidy Lausanne - A Double-Layered Timber Folded Plate Structure. Journal of the International Association for Shell and Spatial Structures, 58, , DOI: /j.iass
34 Seg 54 Verb. 114 Robeller, C., Gamerro, J. and Weinand, Y. (2017). Théâtre Vidy Lausanne - A Double-Layered Timber Folded Plate Structure. Journal of the International Association for Shell and Spatial Structures, 58, , DOI: /j.iass
35 CLT 40 mm 3 12,5 / 15 / 12,5 mm I-I CLT 45 mm 5 5 x 9 mm I-I-I LVL 39 mm x 3 mm II III III II
36 CLT 45 mm CLT 40 mm Kerto Q 39 mm 500 M(N.m) CLT 40 mm 3 12,5 / 15 / 12,5 mm I-I CLT 45 mm 5 5 x 9 mm I-I-I rot( ) LVL 39 mm x 3 mm II III III II Robeller, C. Gamerro J., Coanon P. and Weinand, Y. Théâtre Vidy Lausanne, in S-WIN FBK Weinfelden 2016
37 Robeller, C., Gamerro, J. and Weinand, Y. (2017). Théâtre Vidy Lausanne - A Double-Layered Timber Folded Plate Structure. Journal of the International Association for Shell and Spatial Structures, 58, , DOI: /j.iass
38 Robeller, C., Gamerro, J. and Weinand, Y. (2017). Théâtre Vidy Lausanne - A Double-Layered Timber Folded Plate Structure. Journal of the International Association for Shell and Spatial Structures, 58, , DOI: /j.iass
39 Robeller, C., Gamerro, J. and Weinand, Y. (2017). Théâtre Vidy Lausanne - A Double-Layered Timber Folded Plate Structure. Journal of the International Association for Shell and Spatial Structures, 58, , DOI: /j.iass
40 C ±270 Loading by crane Y Z B ±270 z x y X Safety cover Fixation points Robeller, C., Gamerro, J. and Weinand, Y. (2017). Théâtre Vidy Lausanne - A Double-Layered Timber Folded Plate Structure. Journal of the International Association for Shell and Spatial Structures, 58, , DOI: /j.iass
41 Fabrication Parameters ISO CNC Code Simulation Robeller, C., Gamerro, J. and Weinand, Y. (2017). Théâtre Vidy Lausanne - A Double-Layered Timber Folded Plate Structure. Journal of the International Association for Shell and Spatial Structures, 58, , DOI: /j.iass
42 Robeller, C., Gamerro, J. and Weinand, Y. (2017). Théâtre Vidy Lausanne - A Double-Layered Timber Folded Plate Structure. Journal of the International Association for Shell and Spatial Structures, 58, , DOI: /j.iass
43 Robeller, C., Gamerro, J. and Weinand, Y. (2017). Théâtre Vidy Lausanne - A Double-Layered Timber Folded Plate Structure. Journal of the International Association for Shell and Spatial Structures, 58, , DOI: /j.iass
44 Robeller, C., Gamerro, J. and Weinand, Y. (2017). Théâtre Vidy Lausanne - A Double-Layered Timber Folded Plate Structure. Journal of the International Association for Shell and Spatial Structures, 58, , DOI: /j.iass
45 Robeller, C., Gamerro, J. and Weinand, Y. (2017). Théâtre Vidy Lausanne - A Double-Layered Timber Folded Plate Structure. Journal of the International Association for Shell and Spatial Structures, 58, , DOI: /j.iass
46 Robeller, C., Gamerro, J. and Weinand, Y. (2017). Théâtre Vidy Lausanne - A Double-Layered Timber Folded Plate Structure. Journal of the International Association for Shell and Spatial Structures, 58, , DOI: /j.iass
47 Building section and production timeline Robeller, C., Gamerro, J. and Weinand, Y. (2017). Théâtre Vidy Lausanne - A Double-Layered Timber Folded Plate Structure. Journal of the International Association for Shell and Spatial Structures, 58, , DOI: /j.iass
48 Robeller, C., Gamerro, J. and Weinand, Y. (2017). Théâtre Vidy Lausanne - A Double-Layered Timber Folded Plate Structure. Journal of the International Association for Shell and Spatial Structures, 58, , DOI: /j.iass
49 Robeller, C., Gamerro, J. and Weinand, Y. (2017). Théâtre Vidy Lausanne - A Double-Layered Timber Folded Plate Structure. Journal of the International Association for Shell and Spatial Structures, 58, , DOI: /j.iass
50 Robeller, C., Gamerro, J. and Weinand, Y. (2017). Théâtre Vidy Lausanne - A Double-Layered Timber Folded Plate Structure. Journal of the International Association for Shell and Spatial Structures, 58, , DOI: /j.iass
51 Robeller, C., Gamerro, J. and Weinand, Y. (2017). Théâtre Vidy Lausanne - A Double-Layered Timber Folded Plate Structure. Journal of the International Association for Shell and Spatial Structures, 58, , DOI: /j.iass
52
53 Robeller, C., Gamerro, J. and Weinand, Y. (2017). Théâtre Vidy Lausanne - A Double-Layered Timber Folded Plate Structure. Journal of the International Association for Shell and Spatial Structures, 58, , DOI: /j.iass
54 A Double-Layered Timber Plate Shell
55 Anderson, S. Eladio Dieste, Innovation in Structural Art, p.80 Citricos Caputto Fruit Packing Plant, Salto, Brazil, ,
56 Full size support structure Re-use of support structure = identical form
57 Multihalle LU-Manternach, m Robeller, C., Konaković, M., Dedijer, M., Pauly, M. and Weinand, Y. (2017). Double-layered timber plate shell. International Journal of Space Structures, 32(3-4), , DOI: /
58 Robeller, C., Konaković, M., Dedijer, M., Pauly, M. and Weinand, Y. (2017). Double-layered timber plate shell. International Journal of Space Structures, 32(3-4), , DOI: /
59 a. S2 S1 n 1 n 2 S4 L1 S3 n 3 v 4 L2 n 4 v 4 W1 W0 u 4 Robeller, C., Konaković, M., Dedijer, M., Pauly, M. and Weinand, Y. (2017). Double-layered timber plate shell. International Journal of Space Structures, 32(3-4), , DOI: /
60 Robeller, C., Konaković, M., Dedijer, M., Pauly, M. and Weinand, Y. (2017). Double-layered timber plate shell. International Journal of Space Structures, 32(3-4), , DOI: /
61 7 m X-equilibrium (dimensioning) µ frott =0.6 W block RF x,elu µ =6.58kN M block = 700kg Robeller, C., Konaković, M., Dedijer, M., Pauly, M. and Weinand, Y. (2017). Double-layered timber plate shell. International Journal of Space Structures, 32(3-4), , DOI: /
62 Robeller, C., Konaković, M., Dedijer, M., Pauly, M. and Weinand, Y. (2017). Double-layered timber plate shell. International Journal of Space Structures, 32(3-4), , DOI: /
63 Robeller, C., Konaković, M., Dedijer, M., Pauly, M. and Weinand, Y. (2017). Double-layered timber plate shell. International Journal of Space Structures, 32(3-4), , DOI: /
64 Video: Annen S.A. Robeller, C., Konaković, M., Dedijer, M., Pauly, M. and Weinand, Y. (2017). Double-layered timber plate shell. International Journal of Space Structures, 32(3-4), , DOI: /
65 Robeller, C., Konaković, M., Dedijer, M., Pauly, M. and Weinand, Y. (2017). Double-layered timber plate shell. International Journal of Space Structures, 32(3-4), , DOI: /
66 Robeller, C., Konaković, M., Dedijer, M., Pauly, M. and Weinand, Y. (2017). Double-layered timber plate shell. International Journal of Space Structures, 32(3-4), , DOI: /
67 Digital Timber Construction New Possibilities with Digital Technology Jun. Prof. Dr. Christopher Robeller Architect BYAK DTC Digital Timber Construction DTC Jun. Prof. Dr. Christopher Robeller TU Kaiserslautern, Faculty of Architecture
Mira Dedijer 1, Stéphane Roche 2, Yves Weinand 3 1 INTRODUCTION 123. θ rotations.
SHEAR RESISTANCE AND FAILURE MODES OF EDGEWISE MULTIPLE TAB-AND-SLOT JOINT (MTSJ) CONNECTION WITH DOVETAIL DESIGN FOR THIN LVL SPRUCE PLYWOOD KERTO-Q PANELS Mira Dedijer, Stéphane Roche, Yves Weinand ABSTRACT:
Butt Two pieces of wood meeting with flat sides adjoining usually at right angles. Some type of connector is needed to prevent movement.
Wood Connections There are basically five different types of connectors: Interlocking (carpentry joints), Dowel, Metal Connectors, Special Formed Connectors and Adhesives. I Interlocking (Carpentry Joints)
ENGINEERED BUILDING PRODUCTS. SplitHanger. mitek.com.au
ENGINEERED BUILDING PRODUCTS SplitHanger mitek.com.au S p l i t H a n g e r SUITABLE FOR VARIOUS WIDTHS OF TIMBER BEAM APPLICATION: SplitHangers are versatile hangers that provide a heavy duty connection
1
Parametric Origami Adaptable temporary buildings Heike Matcha 1, Ante Ljubas 2 1,2 Institute of Design & Technology, Professor pp. Dr.-Ing. eh. Klaus Daniels Department of Architecture, Technical University
Dowel type joints Influence of moisture changes and dowel surface smoothness. Erik Serrano and Johan Sjödin, Växjö University, Sweden
Dowel type joints Influence of moisture changes and dowel surface smoothness Erik Serrano and Johan Sjödin, Växjö University, Sweden Background and introduction With the increased use of glulam in large-span
Ph.D. Preliminary Qualifying Examination. Cover Page. Thermodynamic. January 17, 2013 (Thursday) 9:30 am 12:30 noon Room 2145 Engineering Building
GENERAL INSTRUCTIONS: COLLEGE OF ENGINEERING MECHANICAL ENGINEERING Ph.D. Preliminary Qualifying Examination Cover Page Thermodynamic January 17, 2013 (Thursday) 9:30 am 12:30 noon Room 2145 Engineering
Tension testing of green oak connections FRAME 2003, St Fagans
Tension testing of green oak connections FRAME 2003, St Fagans Dr 1 Introduction A number of timber framing companies were invited to fabricate connections to a given overall geometry, the exact form of
Aspen Art Museum Creating Innovative Wood Structure
Aspen Art Museum Creating Innovative Wood Structure Tallinn Wood Architecture Conference November 25-26, 2015 Aspen Art Museum Wood Space Frame THE PLAYERS OUTLINE THE BUILDING CONCEPT THE ARCHITECT S
Industrial Technology
2017 HIGHER SCHOOL CERTIFICATE EXAMINATION Industrial Technology Timber Products and Furniture Technologies General Instructions Reading time 5 minutes Working time 1 1 2 hours Write using black pen Draw
Connection and performance of two-way CLT plates
Connection and performance of two-way CLT plates by Chao (Tom) Zhang George Lee Dr. Frank Lam Prepared for Forestry Innovation Investment 1130 W Pender St, Vancouver BC V6E 4A4 Timber Engineering and Applied
a. b. SNAP-FIT JOINTS CNC-FABRICATED, INTEGRATED MECHANICAL ATTACHMENT FOR STRUCTURAL WOOD PANELS P deflection h tip y l h base F mating ABSTRACT
SNAP-FIT JOINTS CNC-FABRICATED, INTEGRATED MECHANICAL ATTACHMENT FOR STRUCTURAL WOOD PANELS Christopher Robeller Paul Mayencourt Yes Weinand Swiss Federal Institute o Technology Lausanne EPFL a. b. b P
Das Verbündnis von Tradition und High-Tech im kanadischen Holzbau
Robert Malczyk, M.A.Sc., P.Eng., MBA, Principal Equilibrium Consulting Inc. Canada, Vancouver Das Verbündnis von Tradition und High-Tech im kanadischen Holzbau 1 2 Tradition and high-tech in heavy timber
A Shell construction
A Shell construction A 4/2012 Content 1 BASE AND WALL ANCHORING 1.1 Base with mortar bed 1.2 Base with sill plate 1.3 Base with raised sill plate 1.4 Concrete base (mortar bed) 1.5 Concrete base (sill
Engineering Research into Traditional Timber Joints
Engineering Research into Traditional Timber Joints Richard Harris, Wen- Shao Chang, Peter Walker (BRE CICM, The University of Bath) and Jon Shanks (CSAW Research Fellow, School of Architecture & Design,
Mass$Timber$Building$Systems:$ Understanding$the$Op9ons$
Mass$Timber$Building$Systems:$ Understanding$the$Op9ons$ Presented(on(May(11 th,(2016(by(bernhard(gafner( P.Eng.,(MIStructE,(C.Eng.,(Dipl.Ing.(FH/STV( ( Disclaimer: This presentation was developed by a
Ductility of large-scale dowelled CLT connections under monotonic and cyclic loading
Ductility of large-scale dowelled CLT connections under monotonic and cyclic loading Lisa-Mareike Ottenhaus 1, Minghao Li 2, Tobias Smith 3 1. PhD candidate, Department of Civil and Natural Resources Engineering,
Connections in CLT Assemblies
Creating forest sector solutions www.fpinnovations.ca Connections in CLT Assemblies Cross Laminated Timber Symposium Vancouver, BC February 8-9, 2011 M. Mohammad Building Systems Wood Products Division
Two ranges of 6-CNC axis robots For IMM from 20T to 5000 T
Two ranges of 6-CNC axis robots For IMM from 20T to 5000 T Sepro is innovating and offering two complementary ranges of 6-axis robots: - The Sepro-Stäubli range for equipping IMM from 20 to 1300 T - The
A novel procedure for evaluating the rotational stiffness of traditional timber joints in Taiwan
Structural Studies, Repairs and Maintenance of Heritage Architecture IX 169 A novel procedure for evaluating the rotational stiffness of traditional timber joints in Taiwan W.-S. Chang, M.-F. Hsu & W.-C.
Pergolas & Garden Structures.
Pergolas & Garden Structures www.bouchierfencing.co.uk NOVEMBER 2017 Our Pergolas & Garden Structures - Overview Bouchier Fencing was established nearly 50 years ago and was primarily involved with the
Machine solutions for the production of automotive composites. Composites without borders October 14-16, 2014 / Moscow
Machine solutions for the production of automotive composites Composites without borders October 14-16, 2014 / Moscow Content Information about Stäubli Group Introduction Comparison of fabrics and application
The Future of BIM Will Not Be BIM, and It s Coming Faster Than You Think!
The Future of BIM Will Not Be BIM, and It s Coming Faster Than You Think! Bill Allen Partner, Chief Technology Officer Twitter Handle @Evolve_LAB Join the conversation #AU2016 About Me Bill Allen -EvolveLAB
Quality timber doors and windows
Quality timber doors and windows Make a strong first impression Imagine the impact a one-of-a-kind entry door by Timberware could have on your home. Whether you choose a classic or modern, simple or elaborate
Pull-compression tests on glued-in metric thread rods parallel to grain in different timber species and laminated veneer lumber
COST FP1004 15-17 April 2015 Lisbon, Portugal Pull-compression tests on glued-in metric thread rods parallel to grain in different timber species and laminated veneer lumber Frank Hunger 1, Mislav Stepinac
Computation and geometry in structural design and analysis: proposal for the Computation and Geometry WG15 study group
Computation and geometry in structural design and analysis: proposal for the Computation and Geometry WG15 study group Roel VAN DE STRAAT Structural Engineer Arup Amsterdam, Netherlands roel.van-de-straat@arup.com
T Wooden Structures 1
T512903 Wooden Structures 1 Load Bearing Wooden Structures Structure of Wood Structural Properties of Wood Timber Glued Laminated Timber Laminated Veneer Lumber 1 T512903 Wooden Structures 1 Load Bearing
STRUCTURAL TIMBER DESIGN
STRUCTURAL TIMBER DESIGN to Eurocode 5 2nd Edition Jack Porteous BSc, MSc, DIC, PhD, CEng, MIStructE, FICE Director lack Porteous Consultancy and Abdy Kernlani BSc, MSc, PhD, CEng, FIStructE, FIWSc Professor
ENGINEERED BUILDING PRODUCTS. Boomerang CONNECTOR
ENGINEERED BUILDING PRODUCTS Boomerang CONNECTOR B o o m e r a n g C o n n e c t o r FOR FIXING JACK/CUT-OFF TRUSSES TO HIP/BOOMERANG TRUSSES APPLICATION: The Boomerang Connector has been developed to
CLT Connections Design Seminar on CLT Design, including Connections, and Resistance to Lateral and Gravity Loads
CLT Connections Design Seminar on CLT Design, including Connections, and Resistance to Lateral and Gravity Loads Moncton, NB December 1, 2015 Overview Why connections in CLT are different from other EWP
Project: Post & Beam. Contents. A Post & Beam Perspective. The Plan 1. Joinery Design 6. Shop Drawings 12. Timber Joinery 22
Project: Post & Beam A Post & Beam Perspective i CHAPTER ONE The Plan 1 1.1 Methodology 1 1.2 Parts and Terminology 2 1.3 Project Drawing Views 3 1.3 Plan Views 4 1.3 Elevation Views 4 1.3 Sectional /
Analysis and Testing of a Ready-to-Assemble Wood Framing System
Analysis and Testing of a Ready-to-Assemble Wood Framing System by Vladimir G. Kochkin Thesis submitted to the Faculty of the Virginia Polytechnic Institute and State University in partial fulfillment
UV-T Concealed hook connector TIMBER - TIMBER Aluminum three dimensional perforated plate
Concealed hook connector TIMER - TIMER Aluminum three dimensional perforated plate COMPLETE RANGE Available in 5 versions, to work with the secondary and load applied. Resistance over 60 kn FIELD OF USE
Mechanical behavior of fiberglass reinforced timber joints
Mechanical behavior of fiberglass reinforced timber joints Chen, Chi-Jen 1 ABSTRACT The objective of this research is to investigate the mechanical performance of dowel-type timber joints reinforced by
LESSON PLAN. TOPIC DAY Unit 1 Introduction Concept of engineering mechanics definition of mechanics, statics, dynamics,
Week LESSON PLAN Name of Faculty: Visiting Faculty-1 (THEORY+PRACTICAL) Discipline: Plastic Technology Semester: 2 nd Subject: APPLIED MECHANICS Lesson plan Duration: 15 WEEKS Work Load (Lecture/Practical)
Production Technology woodtec Fankhauser GmbH Timber Frame + swiss quality Construction Table The Modular System for Timber Frames
woodtec Fankhauser GmbH Production Technology For Timber Frame Timber Frame + swiss quality Construction Table The Modular System for Timber Frames 2 woodtec Fankhauser The modules are only mechanically
Effect of Vertical Load under Cyclic Lateral Load Test for Evaluating Sugi CLT Wall Panel
Effect of Vertical Load under Cyclic Lateral Load Test for Evaluating Sugi CLT Wall Panel Minoru OKABE 1, Motoi YASUMURA 2, Kenji KOBAYASHI 3, Takeshi HARAMIISHI 4, Yo NAKASHIMA 5, Kazuhiko FUJITA ABSTRACT:
Bolt Spacing and End Distance of Bolted Connection of Laminated Veneer Lumber (LVL) Sengon
Civil Engineering Dimension, Vol. 19, No. 1, March 2017, 1-6 ISSN 1410-9530 print / ISSN 1979-570X online DOI: 10.9744/CED.19.1.1-6 Bolt Spacing and End Distance of Bolted Connection of Laminated Veneer
Conventional measurement systems
Conventional measurement systems NEAR FIELD Near-field measurement is suitable for a variety of antennas, from small antennas in compact electronic devices to very large phased array antennas. Planar near-field
Glulam Connection Details
T E C H N I C A L N O T E Glulam Connection Details Note: This version is superseded by a more current edition. Check the current edition for updated design and application recommendations. ENGINEERED
Interaction of analogic and digital workflows for architectural design and production
Interaction of analogic and digital workflows for architectural design and production Oscar Gámez School of Architecture of Nancy, France gamezboh1@univ-lorraine.fr Julien Meyer School of architecture
ENGINEERED BUILDING PRODUCTS. I-Beam HANGERS. NEW Enhanced Capacity with YELLOW MiTek 40 x 3.75mm nails
ENGINEERED BUILDING PRODUCTS I-Beam HANGERS NEW Enhanced Capacity with YELLOW MiTek 40 x 3.75mm nails I - B e a m H a n g e r s - F a c e & T o p F i x e d FOR FACE AND TOP FIXING OF I-BEAMS TO BEAMS APPLICATION:
Materials, tools and processes
Materials, tools and processes Extension material for Level 1 Design and Visual Communication Study Guide ISBN 978-1-877459-02-3, Page 153 Tools Tools are used to work materials to improve their appearance,
An Innovative Prefabricated Steel Structure System. De Ming (Derry) Yu, Project Director, New World China Land Co. Ltd.
An Innovative Prefabricated Steel Structure System De Ming (Derry) Yu, Project Director, New World China Land Co. Ltd. Table of Contents 1. Main Problems in Current Steel Structure Connections & Our Proposal
Wood Structures & Wood Windows: The Resurgence Continues
Wood Structures & Wood Windows: The Resurgence Continues There s clearly a resurgence in wood buildings happening right now. With CLT beam construction being one of Architectural Digest s Top 5 Architectural
NEW METHOD FOR THE PRODUCTION OF DECK SLABS OF STEEL-CONCRETE-COMPOSITE BRIDGES
NEW METHOD FOR THE PRODUCTION OF DECK SLABS OF STEEL-CONCRETE-COMPOSITE BRIDGES Kerstin Fuchs 1 and Johann Kollegger 2 1 PhD candidate, 2 Professor Institute for Structural Engineering, TU Wien Abstract
ISO Paper Determination of tearing resistance Elmendorf method. Papier Détermination de la résistance au déchirement Méthode Elmendorf
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 1974 Fourth edition 2012-05-01 Paper Determination of tearing resistance Elmendorf method Papier Détermination de la résistance au déchirement
Fabrication Manual 01/2012
10.1. TYPES OF FRAMES DuPont Corian must be supported on a strong perimeter frame that will keep it level for the useful life of the top. Varying lay-outs and overhangs place different challenges on our
INNOVATIONS IN SITTING DESIGN WITH A USE OF CNC TECHNOLOGY
INNOVATIONS IN SITTING DESIGN WITH A USE OF CNC TECHNOLOGY Milan Šimek, Jiří Tauber, Václav Šprdlík Department of Furniture, Design and Habitation, Faculty of Forestry and Wood Technology, Mendel University
SuperRailSystem. Section 2.0 Products
SuperRailSystem Section 2.0 Products British Columbia Alberta 520 46 th Ave SE 5935 35 th Street SE Phone: (250) 832-6 Salmon Arm, BC Calgary, Alberta info@precisionaluminum.ca Fax: (250) 832-36 Canada
RF pulse design and the Small Tip Angle Approximation
RF pulse design and the Small Tip Angle Approximation Dr Shaihan J Malik Lecturer in Imaging Sciences Division of Imaging Sciences & Biomedical Engineering King s College London shaihan.malik@kcl.ac.uk
CARTON SEALER MACHINES WITH SELF ADHESIVE TAPE SEMI-AUTOMATIC They need an operator to fold the top carton flaps before being introduced in the machine. AUTOMATIC ADJUSTMENT MACHINES (Random) They adjust
Scientific Highlights 2016
Scientific Highlights 2016 Science and Technology Sector Schools and Faculties Faculty of Science Louvain School of Engineering (EPL) Faculty of Architecture, Architectural Engineering and Urban Planning
Football Goals 7,32x2,44 m
Football Goals 7,32x2,44 m 120x100 mm Professional aluminum football goals 7,32x2,44 m Made of special oval aluminum profile 120x100 mm with double reinforcing ribs. The main frame of the goal powder coated
ORIGAMI: SYMMETRY AND APLICATIONS IN ARCHITECTURE
ORIGAMI: SYMMETRY AND APLICATIONS IN ARCHITECTURE Juliana Matsubara juju.matsuri@gmail.com Undergraduate student, School of Civil Engineering, Architecture and Urban Planning, State University of Campinas,
Timber Fabric: Applying Textile Principles on a Building Scale
Timber Fabric: Applying Textile Principles on a Building Scale Markus M. Hudert IBOIS Laboratory for Timber Construction EPFL, Lausanne, Switzerland Yves Weinand IBOIS Laboratory for Timber Construction
PARAMETRIC MATERIALITY. Material properties as catalyst for design
C. M. Herr, N. Gu, S. Roudavski, M. A. Schnabel, Circuit Bending, Breaking and Mending: Proceedings of the 16th International Conference on Computer-Aided Architectural Design Research in Asia, 165-174.
HASSLACHER NORICA TIMBER from wood to wonders. From wood to wonders. CLT, GLT and further hightec wood products
HASSLACHER NORICA TIMBER from wood to wonders. From wood to wonders CLT, GLT and further hightec wood products Future Building Vienna, 2018-05-08 DI Georg Jeitler Innovations Standardisations Certifications
Experimental and numerical study of nailed laminated timber elements for in plane and transverse loading
Experimental and numerical study of nailed laminated timber elements for in plane and transverse loading Haller, Peer 1 SUMMARY Nailed laminated timber elements are used in housing construction for floor,
An X-band Bandpass WR-90 Filtering Antenna with Offset Resonators Xi He a), Jin Li, Cheng Guo and Jun Xu
This article has been accepted and published on J-STAGE in advance of copyediting. Content is final as presented. IEICE Electronics Express, Vol.* No.*,*-* An X-band Bandpass WR-90 Filtering Antenna with
IABSE SYMPOSIUM NANTES, 2018
IABSE SYMPOSIUM NANTES, 2018 REPORT International Association for Bridge and Structural Engineering IABSE Publisher IABSE c/o ETH Hönggerberg C H - 8093 Zürich, Switzer land Tel: +41 44 633 2647 Fax: +41
PRECAST CONCRETE STRUCTURES
PRECAST CONCRETE STRUCTURES 1. INTRODUCTION The concept of precast (also known as prefabricated ) construction includes those buildings, where the majority of structural components are standardized and
Wood Products Taxonomy
THEN NOW Wood Products Taxonomy WOOD Composites Solid Wood Panels Engineered Lumber Composites (ELC) Softwood Lumber Glued Treated Hardwood Lumber Wood/ Non-wood Wood Based LVL Boards Finger joined CCA
WoodWorks Connection Design Workshop
WoodWorks Connection Design Workshop Bernhard Gafner, Struct.Eng, P.Eng, MIStructE, Dipl. Ing. FH/STV bernhard@aspectengineers.com Adam Gerber, P.Eng, M.A.Sc. adam@aspectengineers.com Disclaimer: This
VERSA-LAM. An Introduction to VERSA-LAM Products
44 VERSA-LAM An Introduction to VERSA-LAM Products VERSA-LAM is one of the strongest and stiffest engineered wood products approved in the UK. 241 302 356 406 VERSA-LAM products are excellent as floor
Adjustment Has adjustment strike block screw for sealing action adjustment.
RP8 Si A concealed, acoustic automatic door bottom silicon seal for medium temperature smoke and fire door applications. RP8Si is spring loaded to lift clear off the floor as soon as the door leaf is opened
13m High Glass Under Protection
Presseinformation Press release newsinformation de presse sedak GmbH & Co. KG Einsteinring 1 86368 Gersthofen This text can be downloaded at www.sedak.com and www.pr-nord.de sedak: Large glass for UNO
INDUSTRIAL TECHNOLOGY
STUDENT NUMBER CENTRE NUMBER N E W S O U T H W A L E S HIGHER SCHOOL CERTIFICATE EXAMINATION 1995 INDUSTRIAL TECHNOLOGY 2 UNIT PART B WOOD Time allowed for Part A and Part B Two hours and a half (Plus
Timber Resin Splice. Introduction
Timber Resin Splice Introduction A Timber Resin Splice (TRS ) is a Rotafix patented solution for repairing damaged and/or under-specification timber members. New sections of replacement timber can be species
1. Enumerate the most commonly used engineering materials and state some important properties and their engineering applications.
Code No: R05310305 Set No. 1 III B.Tech I Semester Regular Examinations, November 2008 DESIGN OF MACHINE MEMBERS-I ( Common to Mechanical Engineering and Production Engineering) Time: 3 hours Max Marks:
Robotics Projects at NAIT. David Carpenter PhD.
Robotics Projects at NAIT David Carpenter PhD. Introduction and background NAIT- Largest Polytechnic in Western Canada As a Polytechnic: Programs include degree, diploma, certificates and apprenticeship
Microwave & RF
Why GTK is the right choice for microwave and RF products Quality 100% of assemblies tested for continuity, open circuits, short circuits and contact resistance Each production run is batch tested for
Disclaimer: This presentation was developed by a third party and is not funded by WoodWorks or the Softwood Lumber Board.
Disclaimer: This presentation was developed by a third party and is not funded by WoodWorks or the Softwood Lumber Board. The Wood Products Council is a Registered Provider with The American Institute
COLUMN 11/2013 LINEAR STRUCTURAL ELEMENT
11/2013 LINEAR STRUCTURAL ELEMENT OÜ TMB Element produces linear structural elements with the product name column in conformity with the standard EVS-EN 13225 Precast concrete products. Linear structural
25-Sep-17. SPECIES, SITE, SOIL, CLIMATE, MICROCLIMATE, WEATHER, GENES etc
SPECIES, SITE, SOIL, CLIMATE, MICROCLIMATE, WEATHER, GENES etc 1 Pine Spruce Grading use 2 WOOD 3 WOOD: CELLULOSE HEMICELLULOSES LIGNIN (BINDER) 4 WOOD: CELLULOSE HEMICELLULOSES LIGNIN (BINDER) RESINS
Processes Advantages Disadvantages Identifying features Products
Plastics Processes Plastics manufacturing processes are mostly mass production processes with high volumes of output. The high cost of machinery and tooling is offset by the speed and volume of production.
State of the art of 3D printing/additive manufacturing technologies and their possible application in buildings/curtain wall/construction industry
State of the art of 3D printing/additive manufacturing technologies and their possible application in buildings/curtain wall/construction industry Natasa Mrazovic, M.Arch.Eng., lic.arch., M.CE. Permasteelisa,
Wood Products Taxonomy
Then 1 Now 2 Wood Products Taxonomy WOOD Composites Solid Wood Panels Engineered Lumber Composites (ELC) Softwood Lumber Glued Treated Hardwood Lumber Wood/ Non-wood Wood Based LVL Boards Finger joined
United States Patent [19]
![United States Patent [19]](/thumbs/76/73311410.jpg "United States Patent [19]")
United States Patent [19] Stiles [1 1] [45] USOOS373660A Patent Number: Date of Patent: Dec. 20, 1994 [54] TRELLIS SUPPORT SYSTEM [75] Inventor: Herbert D. Stiles, Blackstone, Va. [73] Assignees: Virginia
Load tables for a transport anchor system with Würth ASSY 3.0 combi self-tapping screws = 10 mm as defined under ETA-11/0190 (6/27/2013)
prof. dr.-ing. erner hartmut Load tables for a transport anchor system d with Würth ASSY 3.0 combi self-tapping screws = 10 mm as defined under ETA-11/0190 (6/27/2013) Threaded length lg = 60 mm Transport
HECO-TOPIX -CombiConnect HECO-TOPIX -Therm HCS-Calculation software
HECO-TOPIX -CombiConnect HECO-TOPIX -Therm HCS-Calculation software THE WOOD SCREW FOR THE PROFESSIONAL The HECO-Calculation software (HCS) and HECO-TOPIX Woodscrews for easy estimation and safe assembling
Design Technology. Year 9
Design Technology Year 9 Food Technology Year 9 Curriculum Map To handle different equipment safely and correctly, including cutting techniques. Demonstrate finishing techniques applied to cakes To develop
Design, Development and Analysis of Hydraulic Fixture for machining Engine cylinder block on VMC
Design, Development and Analysis of Hydraulic Fixture for machining Engine cylinder block on VMC Abhijeet Swami 1, Prof. G.E. Kondhalkar 2 1PG Student, Mechanical Engineering Department, ABMSP's APCOER,
Load tables for a transport anchor system with Würth ASSY 3.0 combi self-tapping screws = 12 mm as defined under ETA-11/0190 (6/27/2013)
prof. dr.-ing. erner hartmut Load tables for a transport anchor system d with Würth ASSY 3.0 combi self-tapping screws = 12 mm as defined under ETA-11/0190 (6/27/2013) Threaded length lg = 80 mm Transport
SmartFactory KL. Pioneer of Industrie 4.0. Welcome to the future of industrial production
SmartFactory KL Pioneer of Industrie 4.0 Welcome to the future of industrial production 02 VISION The future must be simple. in 1991, Mark Weiser described the vision of a future world with the term of
CLT Cross Laminated Timber
CLT Cross Laminated Timber Connections Date: 21.08.2014 Disclaimer The below presented structural analysis is an exemplified calculation. This calculation is solely a proposal for a design approach. This
ASSEMBLY MANUAL POLAR GRIPPERS
ASSEMBLY MANUAL POLAR GRIPPERS 2012 TABLE OF CONTENTS TABLE OF CONTENTS... 2 PRESENTATION... 3 AMG GRIPPERS FOR ROBOTS... 4 PREPARATION OF THE PARTS... 5 PREPARING A MAIN BOOM... 6 PREPARING A SECONDARY
Skills. Pupil Homework Name :- Lesmahagow High School Technical Department. Homework Name the tool shown opposite.
Homework 27 1. Name the tool shown opposite. (Page 38) (1) Lesmahagow High School Technical Department 2. Name the tool shown opposite. (Page 39) (1) Practical Woodworking 3. Name the tool shown opposite.
Tension Perpendicular to Grain Strength of Wood, Laminated Veneer Lumber, and a Wood Plastic Composite.
Tension Perpendicular to Grain Strength of Wood, Laminated Veneer Lumber, and a Wood Plastic Composite. Tracy Hummer, Research Assistant J. Daniel Dolan, Professor Michael Wolcott, Professor Wood Materials
VCE VET FURNISHING (CABINET MAKING)
Victorian Certificate of Education 2003 SUPERVISOR TO ATTACH PROCESSING LABEL HERE VCE VET FURNISHING (CABINET MAKING) Section Written examination Friday 31 October 2003 Reading time: 3.00 pm to 3.15 pm
Investigations on the Effectiveness of Self-tapping Screws in Reinforcing Bolted Timber Connections
Investigations on the Effectiveness of Self-tapping Screws in Reinforcing Bolted Timber Connections Mohammad Mohammad Group Leader, Building Systems Forintek Canada Corp, Eastern Division Quebec, Canada
Ceiling Installation
Ceiling Installation Sounds Impressive Used with or without optional rockwool insulation panels, all four different millings of Echolinear panelling deliver highly effective sound absorption across a broad
ORIGAMI E2. An electric powered model made from sheet foam based on the configuration of a paper glider. Concept and general arrangement by
ORIGAMI E2 An electric powered model made from sheet foam based on the configuration of a paper glider. Concept and general arrangement by Jack Pignolo Plan by Paul Bradley February 2010 ORIGAMI E2 38
Design and Manufacture JOINING
Design and Manufacture JOINING Introduction Different materials require different tools. These tools and joints are used when joining wood: Finger Dovetail Housing Dowel Cross halving Corner Lap Mortise
MEEVER BRACING 400 SERIES
Description The Meever Series bracing is very easy and straightforward to assemble, very adaptable, modular hydraulic bracing system that has interchangeable extension modules in various lengths. The 400
(12) United States Patent
(12) United States Patent Garcia et al. USOO6540079B1 (10) Patent No.: (45) Date of Patent: Apr. 1, 2003 (54) PRODUCT PACKAGING UNDER FILMI-SEALED SHELL (75) Inventors: Firmin Garcia, Evreux (FR); Aline
Splitting strength of beams loaded perpendicular to grain by connections, a fracture mechanical approach
Splitting strength of beams loaded perpendicular to grain by connections, a fracture mechanical approach Ad Leijten Civil Eng. PhD, Senior Researcr University of Techn. Delft Delft, T Netrlands A.Leijten@citg.tudelft.nl
Standard specifications SRA100B-01-FD11
Standard specifications SRA100B-01-FD11 2nd edition 1303, SSRAEN-050-002,001 Table of contents 1. Outline... 1 2. Basic specifications... 2 3. Robot dimensions and working envelope... 3 4. Detail of tool
A Semi-Minimalistic Approach to Humanoid Design
International Journal of Scientific and Research Publications, Volume 2, Issue 4, April 2012 1 A Semi-Minimalistic Approach to Humanoid Design Hari Krishnan R., Vallikannu A.L. Department of Electronics
TECHNICAL UNIVERSITY OF CLUJ NAPOCA FACULTY OF MACHINE BUILDING. Department for Fabrication Engineering. Eng. Bogdan MOCAN.
TECHNICAL UNIVERSITY OF CLUJ NAPOCA FACULTY OF MACHINE BUILDING Department for Fabrication Engineering Eng. Bogdan MOCAN PhD THESIS Research and contributions on the oriented design and the performance
SECTION WOOD ARCHITECTURAL CABINETS AND QUARTZ COUNTERTOPS
SECTION 064113- WOOD ARCHITECTURAL CABINETS AND QUARTZ COUNTERTOPS PART 1- GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions