101-DAY2 101-DAY2 101-DAY2. Copyright 2012 OnlineCardClasses.com. All rights reserved.

Transcription

1 7 Blended Spritz & Flick: 1. Ink tag with Distress Ink using Ink Blending Tool in circular motion. 2. Repeat with additional colors. 3. Mist water in hand and flick drops on to inked tag. 4. Dry water with 101-DAY2 Brushless Watercolor: 1. Ink stamp with various colors of distress ink. 2. Mist stamp with water to allow colors to wick and blend. 3. Stamp image on to watercolor paper and immediately lift off. 4. Dry inks with heat tool for watercolor effect. 101-DAY2 Wrinkle-Free Distress: 1. Rub several colors of Distress Ink on Craft Sheet. 2. Mist Craft Sheet heavily with water to create droplets of color. 3. Press tag into ink and dry with 4. Tap tag into remaining ink drying with heat tool between each layer. 101-DAY2

2 11 Alcohol Ink Agates: 1. Apply felt and various colors of Alcohol Inks to Ink Applicator Tool. 2. Shake Mixative and apply one drop to Ink Tool. 3. Stamp inked tool on to Gloss Paper until surface is covered. 4. Apply Blending Solution to Ink Tool and stamp tool over background. 5. Apply additional colors or drip Blending Solution directly on to background. 6. Stamp image with Archival Ink and heat to dry. 101-DAY3 Archival Resist: 1. Stamp images with bright colors of Archival Ink on to Gloss Paper. 2. Dry with heat tool for a few seconds to avoid smearing. 3. Apply dark color Distress Ink directly over stamped images covering paper. 4. Wipe away excess Distress Ink with soft cloth to reveal resist. 5. Stamp additional images with black Archival Ink and heat to dry. 101-DAY3 Reflections Stamping: 1. Stamp Reflections stamp on to raised smooth areas of Texture Fade. 2. Stamp additional images if desired. 3. Place tag inside Texture Fade and emboss with machine. 4. Remove tag and ink with Distress Ink using an Ink Blending Tool. 101-DAY3

3 15 Watercoloring with Re-inkers: 1. Create palette of water-based re-inkers. 2. Stamp image on to watercolor paper using Jet Black Archival Ink. 3. Color image working from the outside edge in using Water Brush. 4. Blend colors while they are wet, or dry color to add layers. 5. Continue coloring until desired look is achieved. 6. Lift color while blotting wet ink or water with dry cloth. 101-DAY4 Layered Misting: 1. Create Distress Re-inker mixtures by adding one dropper full of re-inker into Mini Mister and fill 3/4 with water. Shake well. 2. Apply colors of Distress Mists directly on to the tag. 3. Repeat with various colors and dry inks with 4. Place stencil over inked tag and mist a darker color over the top. 5. Remove stencil and dry with 101-DAY4 Custom Stamp Pad: 1. Stamp image on to fabric side of Cut n Dry Felt with Jet Black Archival Ink. 2. Cut felt around stamp image (or to size of wood mount block of stamp). 3. Apply water-based re-inkers over black areas of image coloring image with the re-inkers. 4. Ink stamp on pad by lining up image and tapping on custom ink pad. 5. Stamp image on to surface and dry with 101-DAY4

4 19 Stained Kraft Resist 1. Swipe Distress Stain directly over Kraft Resist to saturate with color. 2. Dry with a 3. Ink with various colors of Distress Ink using an Ink Blending Tool. 4. Spritz and flick water on to inked paper if desired and dry with 5. Stamp image with Jet Black Archival Ink and heat to dry. 101-DAY5 Stamping with Stains 1. Mist tag with water to cover. 2. Apply colors of Distress Stains directly to wet tag. 3. Dry with heat tool and spritz with water droplets while drying for a mottled effect. 4. Ink edges of tag with Blending Tool. 5. Apply Picket Fence Distress Stain to stamp and quickly stamp text image - dry with heat tool for maximum opacity. 6. Stamp butterfly image with Jet Black Archival ink. 101-DAY5 Marbled Stains 1. Apply Picket Fence Distress Stain to Craft Sheet. 2. Apply colors of Distress Stain around Picket Fence. 3. Swipe tag through stains several times until tag is covered. 4. Dry with heat tool and spritz with water droplets while drying for a mottled effect. 5. Ink edges of tag with Blending Tool. 6. Stamp images with Jet Black Archival ink. 101-DAY5

5 23 Watercolor with Markers: *Stamp image on watercolor paper with Archival Ink. (Dry/More Intense Color) 1. Color image directly on to paper. 2. Blend color with water and apply additional layers of color. (Wet/More Washed Color) 1. Wet paper with water using Water Brush. 2. Color image directly on to paper. 3. Blend color with water and apply additional layers of color. 101-DAY6 Blending with Markers: *Stamp image on watercolor paper with Archival Ink. (Direct to Paper/More Intense Color) 1. Color entire image with lightest color. 2. Apply darker color and blend with lighter color. (Craft Sheet/More Gradient Color) 1. Apply dark color to Craft Sheet. 2. Swipe lighter color through ink on sheet. 3. Color image and apply lighter color to blend. 101-DAY6 Stamping with Markers: 1. Color directly on to stamp with Markers. 2. Huff warm breath on to inked stamp. 3. Stamp image on Specialty Stamping Paper. 4. Heat to dry. 5. Ink entire surface with Distress Ink using Ink tool. 6. Spritz and flick water and blot away excess. 7. Heat to dry. 101-DAY6

6 27 Nostalgic Batik Technique 1. Stamp image on to tag with a color of Distress Ink. 2. Apply Clear Embossing Powder over image and remove excess. 3. Heat emboss with heat tool until image is shiny. 4. Ink over entire tag with various colors of Blending Tool creating contrast around image. 5. Wipe off excess ink from image. 101-DAY7 Rusted Enamel Technique: 1. Ink tag completely by applying a color of Distress Ink direct. 2. Apply Clear Embossing Powder over entire tag and remove excess. 3. Flick the back of the tag several times to remove some of the embossing powder. Gently swipe finger around various edges of tag as well. 4. Heat emboss with heat tool until tag is shiny. 5. Ink over entire tag with brown Distress Ink using an Ink Blending Tool by pressing ink into tag. 6. Wipe off excess ink from embossed surface. 101-DAY7 Distress Powder Resist Technique: 1. Stamp image with Distress Ink or Distress Embossing Ink. 2. Shake Distress Embossing Powder and apply over stamped image and remove excess powder. 3. Heat emboss until powder melts and changes color a bit. 4. Allow surface to cool to the touch. 5. Rub hand across embossed area to remove release crystals from image. 6. Ink over entire tag with various colors of Distress Ink using an Ink Blending Tool creating contrast around image. 7. Mist cloth with water and wipe off excess ink from image. 101-DAY7

7 31 Dabber Resist Technique: 1. Remove backing of canvas and adhere to Craft Sheet. 2. Apply Paint Dabber to stamp. 3. Stamp image on to canvas and dry with 4. Ink over canvas with Distress Stains (mist with water first to blend). 5. Dry canvas with Heat Tool (blot excess color from image if desired). 6. Remove canvas from Craft Sheet and apply to surface. 101-DAY8 Crackle Paint Resist Technique: 1. Apply a medium to heavy layer of Distress Crackle Paint to tag - leave areas of the tag exposed. 2. Allow paint to dry and crackle completely. 3. Apply Distress Stains over the tag and dry with 4. Layer additional colors of Blending Tool. 5. Stamp background images with Distress Ink. 6. Mist towel with water and wipe image off painted surface. 7. Stamp focal image with Archival Ink and dry with 101-DAY8 Shattered Stains Technique: 1. Die cut shape from Grungeboard or chipboard. 2. Apply medium to heavy layer of Rock Candy Distress Crackle Paint. 3. Allow paint to dry and crackle completely. 4. Apply various colors of Distress Stain over crackled surface. 5. Heat the stains to bake them into the surface and blot any excess stain off with a towel. 6. Repeat with additional colors of stain as desired. 101-DAY8

8 35 Perfect Distress Mist: 1. Create Perfect Distress Mist mixture by adding one dropper of Distress re-inker into Mini Mister. 2. Fill ¾ with water and shake to mix. 3. Add a scoop of Perfect Pearls to ink mixture using craft stick. 4. Add a small bead into mister and shake well to emulsify the mixture. 5. Replace nozzle. 6. Mist tag with various colors of Perfect Distress mixture and dry layers. 101-DAY9 Perfect Distress: 1. Ink tag with light colors of Distress Ink. 2. Ink stamp image with darker colors of Distress Ink and stamp on tag. 3. Apply Perfect Pearls powders over stamped image with small dry brush. 4. Remove excess pearls using large dry brush. 5. Mist image with water to cause the colors of ink to wick out. 6. Dry tag with 7. Ink tag with Distress Ink using Ink Blending Tool as desired. 101-DAY9 Perfect Splatter Distress: 1. Apply various colors of Distress Ink directly over Craft Sheet by pressing down. 2. Apply small piles of Perfect Pearls powders using the end of a brush over ink. 3. Mist entire surface with water from mister. 4. Press tag on to ink and pearls, lift and dry with 5. Continue tapping tag into remaining ink and pearls, and dry between layers. 6. Apply additional colors of Blending Tool. 101-DAY9

9 37 Rock Candy Distress Stickles 1. Ink tag using Distress Stains and dry with Heat Tool. 2. Ink stamp with various colors of Distress Ink. 3. Stamp image over background. 4. Apply Rock Candy Distress Stickles to Craft Sheet and apply a thin layer over tag. 5. Spread Stickles out with your finger. 6. Allow to dry completely or dry with Heat Tool. 101-DAY10