SOLENOID VALVES pilot operated, spool type single/dual solenoid (mono/bistable function, W1/W3) stainless steel body, 1/4-1/2

Transcription

1 FTURS The monostable spool valves have TÜV-XID certified I 60 Functional Safety data and can be used up to SIL 4 (/TÜV)-SIL (/XID) The / and / solenoid operated spool valves have threaded port connections ll the exhaust ports of this spool valve are connectable, providing better environmental protection, particularly recommended for sensitive areas such as clean rooms, and applications in the pharmaceutical and food processing sectors The valve offers environmental protection against the ingress of liquids, dusts or any other foreign matter (environmentally-protected construction) an be externally piloted (external air pilot supply) to convert valve to zero minimum operation by flipping a gasket The solenoid valves satisfy all relevant Directives GNRL Differential pressure ( ) Flow (Qv at 6 bar) SOLNOID VLVS pilot operated, spool type single/dual solenoid (mono/bistable function, W/W) stainless steel body, /4 - / - 0 bar [ bar =00 kpa] /4 = 60 l/min (/) ; 760 l/min (/) (NR) / = 000 l/min fluids ( ) temperature range (TS) seal materials ( ) air, inert gas, filtered : - 40 to + 0 VMQ (silicone) + PUR (polyurethane) : - 40 to / / Series - MTRILS IN ONTT WITH FLUID ( ) nsure that the compatibility of the fluids in contact with the materials is verified ody Stainless steel, ISI 6L nd cover (spring) Stainless steel Spool valve internal parts Stainless steel, POM Pilot end-cover Stainless steel ore tube Stainless steel ore and plugnut Stainless steel ore spring Stainless steel Sealings & discs NR Top disc FPM Disc holder POM artridge (Low ) Welded, packless ISI 40 Seat Stainless steel Seat insert POM Shading coil opper Rider ring (Low ) PTF SPIFITIONS pipe orifice flow coefficient kv operating pressure differential (bar) optional solenoids max. (PS) level NM TX/Ix min. () RP-MP basic catalogue number IP6 air ( ) 7 & x d x e mb x mb x i x n ( ) (mm) (m /h) (l/min) ~ = ~/= F LPKF NF NK M PV LI IS ZN S / - Solenoid air pilot operated - spring return (monostable) /4 6 0,7, 0 / 0 0 P () /4 6 0,7, 0 / 0 0 P G4 () /4 6 0,7, 0 / 0 0 LP - m - m m m m () /4 6 0,7, 0 / 0 0 LP m G () /,, 0 / 0 0 P () /,, 0 / 0 0 P G4 () /,, 0 / 0 0 LP - m - m m m m () /,, 0 / 0 0 LP m G () / - Solenoid air pilot operated and return (bistable) /4 6 0,7, 0 / 0 0 P /4 6 0,7, 0 / 0 0 P G4 /4 6 0,7, 0 / 0 0 LP - m - m m m m /4 6 0,7, 0 / 0 0 LP m G /,, 0 / 0 0 P /,, 0 / 0 0 P G4 /,, 0 / 0 0 LP - m - m m m m /,, 0 / 0 0 LP m G Select for NPT NSI.0. or select G for ISO G (/) vailable feature vailable feature in D only () ertified I 60 Functional Safety data, use suffix "SL". () Zero minimum is only achieved if external pressure is applied UP ll leaflets are available on: LP Not vailable 0,4W -,W Ultra Low Low P Not vailable 0,W -,W Reduced and Medium asic POWR LVLS - cold electrical holding values (watt) PI---G 00/R0

2 SPIFITIONS pipe PRFIX TL level description LP RP MP P S D U Dustproof TX (N 0--) * F xplosionproof - NM, 4, 6, 7, m - - V xplosionproof - NM, 4, 6, 7, - 6 SS m - - M ncapsulated TX + Ix (N/I 6007 / 64)* - - T Threaded conduit/hole (M0 x.) - - I S S Intrinsically safe with S coil TX (N 000) * m L P K F Flameproof - lum. TX (I/IS/N: 6007 / 64) * m N F Flameproof - lum. TX + Ix (N/I 6007 / 64)* - - N K Flameproof - lum. TX (N 6007 / 64) * P V ncapsulated TX + Ix (N/I 6007 / 64)* m - - S Solenoid with spade plug connector (N 6070) - - W P Waterproof IP67 - Metal enclosure (N 6070) - - W P D U Dustproof TX (N 0--) - Metal enclosure * L I I.S., alu. enclosure IP67 TX-Ix (N/I 6007 / 644) * m W P I S I.S. with Metal IP67 enclosure TX (N 000) * m W P Z N N.S. metal enclosure TX (N 00)* - - W S Waterproof IP67-6 SS enclosure (N 6070) - - W S D U Dustproof TX (N 0--) - 6 SS enclosure * W S L P K F Flameproof - St. steel TX (I/IS/N: 6007 / 64) m W S M 6 SS "M" encl. TX + Ix (N/I 6007/64)* - - W S L I I.S., 6L SS, IP67 TX-Ix (N/I 6007 / 644) * m W S I S I.S. with Metal IP67-6 SS enclosure TX (N 000) * m W S N F Flameproof - St. steel 6 TX + Ix (N/I 6007 / 64)* - - W S Z N N.S. 6 SS enclosure TX (N 00)* - - Z N ncapsulated Non Sparking TX (N 00) * m - - T Threaded conduit (/" NPT) - - H T lass H - High temperature, +0 ambient temp X Other special constructions - - SUFFIX TL suffix level description LP RP MP P M O Push type or screw type manual operator / - - S L ertified I 60 Functional Safety data () / - - OPTIONS & SSORIS series ll leaflets are available on: -- orifice flow coefficient kv pipe operating pressure differential (bar) stainless steel exhaust protector G NPT (M) - / () () - / () () - / () () - M () vailable feature m vailable feature in D only - Not available * TX solenoids are also approved according to N/I 64 (Dust) and N 46- (non electrical valves) () Provided with "SL" suffix () Not to use with MO suffix optional solenoids max. (PS) level NM TX/Ix min. () () pipe thread basic number () SRIS - PRODUT SLTION GUID STP Select the fluid temperature range and seal material from the general table on page 7. Select basic catalogue number, including pipe thread identification letter. Refer to the specifications table above. xample: G4 STP Select (combination). Select the appropriate operator from the specifications table on page and the table on page. Select for this operator in the electrical characteristics table on page : the level (LP, P), the type of electrical enclosure protection and the desired temperature class. Warning: The ambient temperature range of your application may not exceed the temperature range of your operator. xample: M STP Select suffix (combination) if required. xample: MO STP 4 Select voltage. Refer to standard voltages on page. xample: 0V / 0Hz STP Final catalogue / ordering number. xample: M G4MO 0 V / 0 Hz ORDRING XMPLS: S G 4 0V / 0 Hz S G 4 0V / 0 Hz S G 4 SL 0V / 0 Hz S G 4 MO 0V / 0 Hz SHT 4 MO 0V / 0 Hz ISS G 4 MO 4V / D WSLPKF G MO 4V / D WSLI G 4V / D WPIS G 4V / D M 4 MO 0V / 0 Hz F G G 4 MO 40V / 60 Hz basic catalogue number IP6 air ( ) 7 & x d x e mb x mb x i x n ( ) (mm) (m /h) (l/min) ~ = ~/= F NF NK M PV IS ZN S / - W - pressure held, solenoid air pilot operated and return /4 6 0,66 0 / 0 0 P /4 6 0,66 0 / 0 0 P G4 /4 6 0,66 0 / 0 0 LP - - m m m /4 6 0,66 0 / 0 0 LP m G / - W - pressure release, solenoid air pilot operated and return /4 6 0,66 0 / 0 0 P /4 6 0,66 0 / 0 0 P G4 /4 6 0,66 0 / 0 0 LP - - m m m /4 6 0,66 0 / 0 0 LP m G Select for NPT NSI.0. or select G for ISO G (/) vailable feature vailable feature in D only () Zero minimum is only achieved if external pressure is applied voltage suffix () Prefixes F and V should always be used with the letter G in the basic number. 00/R0

3 SRIS - XPLNTION OF TMPRTUR RNGS OF SOLNOID VLVS Valve temperature range The valve temperature range (TS) is determined by the selected seal material, the temperature range for proper operation of the valve and sometimes by the fluid (e.g. steam) Operator ambient temperature range The operator ambient temperature range is determined by the selected level (LP, RP, MP or P) and the safety code Total temperature range The temperature range of the complete solenoid valve is determined by the limitations of both temperature ranges above LTRIL HRTRISTIS oil insulation class F lectrical safety I Standard voltages D (=) 4V - 4V (~) 4V - 4V - V - 0V () /0Hz; other voltages and 60Hz are available on request ratings operator electrical ambient replacement coil / kit inrush holding hot/cold temperature enclosure safety code type option range (TS) protection () ~ ~ = ~ = (V) (V) (W) (W) ( ) () (N 60) 0 V/0 Hz 4V/D asic (P) S 0, /, -40 to +7 N 6070 IP6 moulded SDU 0, /, -40 to +7 IID IP6 T 00 (~)/ (=) IP6 moulded - (4) - (4) 0 WP/WS 0, /, -40 to +7 N 6070 IP67 steel/ss WPDU/WSDU 0, /, -40 to +7 IID IP67 T 00 IP67 steel/ss - (4) - (4) 04 NF/WSNF 0, - (-60) (7) -40 to +/40/60 IIG x d II T6/T/T4, IID x td IP67 alum./ss NF/WSNF /, (-60) (7) -40 to +40/60/7 IIG x d II T6/T/T4, IID x td IP67 alum./ss NK 0, /, -40 to +0/60 IIG x d II+H T4, IID x td IP6alum M/WSM 0, /, -40 to +40 IIG x e mb II T, IID x td IP67 steel/ss PV 0, /, -40 to +6 IIG x mb II T(~)/T4(=),IID x md IP67 moulded - (4) - (4) 0 F/V 0, /, -40 to +4/40 NM type 7 and 4X moulded ZN 0, /, -0 to +0 IIGD x n II T IP6 moulded - (4) - (4) 0 WPZN/WSZN 0, /, -40 to +0/60 IIGD x n II T(~)/T4(=) IP67 steel/ss - (4) - (4) 04 Low (LP) S,,,,7/,7-40 to +60 N 6070 IP6 moulded WP/WS,,,,7/,7-40 to +60 N 6070 IP67 steel/ss LPKF/WSLPKF (6) ,/0, -40 to +60 IIG x d II+H T6, IID x td IP67 alum./ss - - (4) NF/WSNF - -, - /, (-60) (7) -40 to +7/0 IIG x d II T6/T, IID x td IP67 alum./ss - (4) - (4) 0 M/WSM,,,,7/,7-40 to +40/ IIG x e mb II T6/T, IID x td IP67 steel/ss - (4) - (4) 0 PV - - -,7/,7-40 to +6 IIG x mb II T6 / IID x md IP67 moulded - - (4) 0 F/V - - -,7/,7-40 to +60 NM type 7 and 4X moulded - - (4) ISS () ,4/04-40 to +60 IIGD x ia II T6 IP6 moulded LI (6) ,/0, -40 to +60 IIG x ia II Gb T6, IID x t III Db IP67alum., - - (4) 4 WSLI (6) ,/0, -40 to +60 IIG x ia II Ga T6, IID x t III Db IP67SS - - (4) 4 WPIS/WSIS () ,4/04-40 to +60 IIGD x ia II T6 IP67steel ZN - - -,7/,7-0 to +0 IIGD x n II T IP6 moulded - - (4) 07 WPZN/WSZN,,,,7/,7-40 to +60 IIGD x n II T6 IP67 steel/ss - (4) - (4) 0 option safety parameters U I = (D) I I P I L I I (V) (m) (W) (H) (µf) Low (LP) ISS 00, 0 0 WPIS/WSIS 00, 0 0 LI/WSLI 00, 0 0 LTRIL ONNTIONS () Temperature range can be limited by sealings () Refer to the dimensional drawings on pages:4 to 7 () ISS/WPIS/WSIS/LI/WSLI: heck the electrical characteristics in the corresponding catalogue pages (4) Multiple coil kits are available under TX/Ix, contact us () Low Power, 0 V does not exist. Maximum voltage in is V (6) LPKF/WSLPKF/LI/WSLI: Low Power, 4 V D only (7) The certified minimum temperature of this operator - Not available connection S, SDU, ZN, ISS Spade plug connector with cable gland N70-0 (ISO 4400) for cables with an outer diameter from 6 to 0 mm WP, WS, M, WSM, WPDU, WSDU, WPZN,WSZN, WPIS, WSIS M0 cable gland for cables with an outer diameter from 7 to mm. With an internal and external facility for an earthing or bonding conductor NF, WSNF, LPKF, WSLPKF /" NPT threaded cable entry. nclosures are supplied without cable gland NK /4" NPT threaded cable entry. nclosures are supplied without cable gland PV Moulded-in cable, standard length m LI, WSLI / cable gland for cables with an outer diameter from 6 to mm. With an internal and external facility for an earthing or bonding conductor F, V /" NPT conduits, standard length cm DDITIONL OPTIONS Valves configured for external pilot air supply, TPL 047 Other pipe threads are available on request x mb/md ( "PV") solenoid can be supplied with various cable lengths ompliance with "UL", "S" and other local approvals available on request /" NPT ( "T") and M0 x. ( "T") conduits (aluminium or 6 SS) available for steel solenoid housing INSTLLTION Multi language installation/maintenance instructions are included with each valve The solenoid valves can be mounted in any position without affecting operation Do not connect the pressure supply to the exhaust port. The environmentally-protected construction is not adapted for a distributing function or use in NO function. ontact us for functions available in specific versions I 60 Functional Safety (suffix SL), allowable temperature range: -40 to +60. For probability of failure, contact us It is necessary to connect pipes or fittings to the exhaust ports to protect the internal parts of the spool valve and its pneumatic operator if used outside or in harsh environments (dusts, liquids etc.) Threaded pipe connection identifier is: = NPT (NSI.0.); G = G (ISO /) Prefix "NF/WSNF" enclosure is provided with a /" NPT threaded entry hole, M0 x, ( "T") is optional. oth are supplied without cable gland Prefix "NK" enclosure is provided with a /4" NPT threaded entry hole, /" NPT ( "T") or M0 x, ( "T") are optional. oth are supplied without cable gland ll leaflets are available on: /R0

4 SRIS - DIMNSIONS (mm), WIGHT (kg) Series Series 4, / 6, 4 = = x /4 7, 4 / 4,6,4 x / 40, 4 4, 7, mounting holes. mm dia.;spotfacing: mm dia., depth mm 6. mm dia.;spotfacing: mm dia., depth 6 mm,,6, TYP 0: Prefixes S: IP6, ZN: II G/D, IP6, x n II, SDU: II D, IP6, T00 to 00 asic poxy moulded I / ISO / 4 / 4 / 4 / 4 / 4 TYP 0: Prefixes NF/WSNF: II G/D, IP67, x d II asic luminium, epoxy coated (NF) ISI 6 SS (WSNF) N/I and N/I 64-4 / 4 / 4 / 4 / 4 / 4 6 G / / NPT D TYP 0: Prefix NK: II GD, IP6, x d II + H asic luminium, epoxy coated N and N 64-4 / 4 / 4 / 4 / 4 / 4 TYP 04: Prefixes WP/WS: IP67, M/WSM: II G/D, IP67, x emb II, WPDU/WSDU: II D, IP67, T to 00, WPZN/WSZN: II G/D, IP67, x n II asic Steel, epoxy coated (M, WP, WPDU, WPZN) ISI 6 SS (WS, WSDU, WSM, and WSZN) I / N / and N 64-4 / 4 / 4 / 4 / 4 / 4 / / 4 /4 NPT 60 60, 64, ll leaflets are available on: /R0

5 SRIS - DIMNSIONS (mm), WIGHT (kg) TYP 0: Prefix PV: II G/D, IP67, x mb II, x md asic poxy encapsulated N/I and N/I 64-4 / 4 / 4 / 4 / 4 / 4 TYP 06: Prefixes F/V: IS-6 NSI / NM type 7 and asic poxy encapsulated IS-6 NSI / NM Type 7 and NOT: applicable to solenoid only G4 / G4 / G4 / G4 / G4 / G4 / / D 46 D TYP 07: Prefixes S: IP6, ZN: II G/D, IP6, x n II Low poxy moulded I / ISO 4400 / / / / / TYP 0: Prefixes NF/WSNF: II G/D, IP67, x d II Low luminium, epoxy coated (NF) ISI 6 SS (WSNF) N/I and N/I 64- / / / / / 6 / NPT / NPT D TYP 0: Prefixes WP/WS: IP67, M/WSM: II G/D, IP67, x emb II, WPDU/WSDU: II D, IP67, T to 00, WPZN/WSZN: II G/D, IP67, x n II, /WSIS: = II G/D x ia II - = II G/D x ia II Low Steel, epoxy coated (M, WP, WPDU, WPZN, WPIS) ISI 6 SS (WS, WSDU, WSM, WSIS and WSZN) I / N / and N 64- / / / / / TYP 0: Prefix PV: II G/D, IP67, x mb II, x md Low poxy encapsulated N/I and N/I 64- / / / / / / NPT 4 / NPT D 46 ll leaflets are available on: /R0

6 SRIS - DIMNSIONS (mm), WIGHT (kg) TYP : Prefixes F/V: IS-6 NSI / NM type 7 and Low poxy encapsulated IS-6 NSI / NM Type 7 and NOT: applicable to solenoid only G / G / G / G / G / G TYP : : II G/D x ia II, IP6 - : II G/D x ia II, IP6 Low Polypropylene moulded I / ISO 4400 N 000 and N 0-- / / / / / / / NPT D D 67 TYP : Prefixes, LPKF/WSLPKF: IIG x d II+H T6, IID x td IP67 T Low luminium, cataphorese black painting / ISI 6L SS I, IS and N: 6007-, 64- / / / / / TYP 4: Prefixes, LI: II G x ia II Gb T6, II D x t III IP67 Db WSLI: II G x ia II Ga T6, II D x t III IP67 Db luminium, cataphorese black painting / ISI 6L SS I and N: 6007-, 64- / / / / / M M / NPT 0 / NPT ll leaflets are available on: /R0

7 SRIS - DIMNSIONS (mm), WIGHT (kg) type option level weight () monostable bistable D D 0 S / SDU / ZN basic , 7 0 6, 0,7,06,0 4, 0 NF basic ,4 4, 4, 6,4 0 WSNF basic ,7, 6,7,0 0 NK basic ,,6,6 4, 04 WP/WPDU/WS/WSDU/M/WSM basic ,70,4,6,04 0 PV basic 44 4, 6 4 6,,,7,6,0 4, 06 F / V basic 4 6, 7 0 6,,,7,6,0 4, 07 S / ZN low 4 0, 0 0 6, 0,7,06,0 4, 0 NF low ,4 4, 4, 6,4 0 WSNF low ,7, 6,7,0 0 WP / WS / M / WSM / WPIS / WSIS low ,70,4,6,04 0 PV low , ,,,7,6,0 4, F / V low 4 0, ,,,7,6,0 4, ISS low 46 7, 0 6, 0,,7,6, 4, LPKF low ,7 - -, 4,4, 4,6 WSLPKF low ,7 - -,00,,,7 4 LI low ,7 - -,40 4,4, 4,6 4 WSLI low ,7 - -,0,6,,76 () Incl. coil(s) and connector(s) x d certified cable gland (on request) Three-core cable, length m) 4 able gland for unarmoured cable with 7 to mm dia. sheath 6 onnector rotatable by 0 increments (cable ø 6-0 mm) Manual operator location, suffix MO xternal pilot air supply, / pipe 0 able gland for unarmoured cable with 6 to mm dia. sheath onnectable pilot exhaust port Non-connectable pilot exhaust port SSORIS ø4 ø4 / NPT /4 NPT / NPT 0 pilot exhaust protector part number pilot top exhaust low (SO solenoid interface) Ø Ø M / /4 / 4, 0 4 exhaust protector (stainless steel) ll leaflets are available on: /R0

8 SRIS - ll leaflets are available on: /R0

9 SPOOL VLVS pilot or air operated, spool type single/dual solenoid (mono/bistable function) stainless steel body, /4 - / / Series FTURS The monostable spool valves have TÜV-XID certified I 60 Functional Safety data and can be used up to SIL 4 (/TÜV)-SIL (/XID) Series versions according to TX 4//, for zones 0, and and series air-operated versions for zones and The / N solenoid operated spool valves have threaded port connections ll the exhaust ports of this spool valve are connectable, providing better environmental protection, particularly recommended for sensitive areas such as clean rooms, and applications in the pharmaceutical and food processing sectors The valve offers environmental protection against the ingress of liquids, dusts or any other foreign matter (environmentally-protected construction) The solenoid valves satisfy all relevant Directives GNRL Differential pressure Flow (Qv at 6 bar) - 0 bar [ bar =00 kpa] /4 = 60 l/min (NR) / = 000 l/min fluids ( ) temperature range (TS) seal materials ( ) air, inert gas, filtered : - 40 to + 0 VMQ (silicone) + PUR (polyurethane) : - 40 to + 60 MTRILS IN ONTT WITH FLUID ( ) nsure that the compatibility of the fluids in contact with the materials is verified ir operated NOMO solenoid (pilot) interface (Series -) (Series ) ody, end covers Stainless steel, ISI 6L Stainless steel, ISI 6L Spool valve internal parts Stainless steel, POM Stainless steel, POM Seals NR NR Pilot internal parts - Size 0 (06.0.0N), refer to catalogue pages: 74 pilot (TNK) and pilot (ISS) IR OPRTD SPIFITIONS pipe orifice flow coefficient kv operating pressure differential (bar) optional basic catalogue number max. (PS) min. air ( ) ( ) (mm) (m /h) (l/min) ~ = Pilot air operated - spring return (monostable) /4 6 0,7, () /,, () Pilot air operated and return (bistable) /4 6 0,7, /,, UP LP Not vailable 0,W Ultra Low Low RP-MP P Not vailable 0, -,W Reduced and Medium asic POWR LVLS - cold electrical holding values (watt) NOMO SOLNOID (PILOT) INTRF SPIFITIONS pipe orifice flow coefficient kv operating pressure differential (bar) min. level optional solenoids max. (PS) TX/NL air ( ) x d x i basic catalogue number ( ) (mm) (m /h) (l/min) ~ = ~/= TNK ISS Solenoid air pilot operated - spring return (monostable) /4 6 0,7, 0 0 P - () /4 6 0,7, - LP - m () Solenoid air pilot operated and return (bistable) /4 6 0,7, 0 0 P - /4 6 0,7, - LP - m Select for NPT NSI.0. or select G for ISO G (/) vailable feature vailable feature in D only. () ertified I 60 Functional Safety data, use suffix "SL". ll leaflets are available on: /R0

10 SRIS - PRFIX TL level description UP LP RP P T N K Flameproof with pilot 74, TX (N 6007 / 64) * I S S Intrinsically safe, pilot, TX ((N 6007) - m - - SUFFIX TL suffix level description UP LP RP P G D Non-electrical, GD c ()/ GD c (), TX (N 46-) M S Screw type manual operator M O Push type or screw type manual operator - m - - S L ertified I 60 Functional Safety data (Series ) () - m - OPTIONS & SSORIS series stainless steel pipe exhaust protector G NPT / () () / () () / () () vailable feature m vailable feature in D only - Not available * TX solenoids are also approved according to N/I 64 (Dust) and N 46- (non electrical valves) () Not to use with MS or MO suffix () Provided with "SL" suffix PRODUT SLTION GUID STP Select the fluid temperature range and seal material from the general table on page 7. Select basic catalogue number, including pipe thread identification letter. Refer to the specifications tables on page 7. xample: G STP Select (combination). Select the appropriate operator from the tables on page 7. Select for this operator in the electrical characteristics table on page : the level (LP, P), the type of electrical enclosure protection and the desired temperature class. Warning: The ambient temperature range of your application may not exceed the temperature range of your operator. ir operated version, does not use. xample : TNK STP Select suffix (combination) if required. Refer to the suffix table, respect the indicated level. GD suffix available for air operated version only (do not use manual operator suffix). xample : MS ORDRING XMPLS: STP 4 Select voltage. Refer to standard voltages on page. ample : 0V / 0Hz STP Final catalogue / ordering number. xample : TNK GMS 0 V / 0 Hz TNK G 0V / 0 Hz TNK G SL 4V / D TNK G MS V / 0 Hz TNK G 0V / 0 Hz TNK G MS 4V / D TNK 0V / 0 Hz ISS G 4V / D ISS G SL 4V / D ISS G MO 4V / D ISS G 4V / D ISS G MO 4V / D G G GD G GDSL G G G GD pipe thread basic number voltage suffix ll leaflets are available on: /R0

11 SRIS - XPLNTION OF TMPRTUR RNGS OF SOLNOID VLVS Valve temperature range The valve temperature range is determined by the selected seal material, the temperature range for proper operation of the valve and sometimes by the fluid (e.g. steam) Operator ambient temperature The operator ambient temperature range is determined by the selected level (LP or P) and range the TX safety code Total temperature range The temperature range of the complete solenoid valve is determined by the limitations of both temperature ranges above LTRIL HRTRISTIS oil insulation class F lectrical safety I Standard voltages D (=) TNK : 4V - 4V ; ISS : 4V (~) TNK : 4V - 4V - V - 0V/0Hz - other voltages and 60Hz are available on request ratings operator electrical ambient replacement coil inrush holding hot/cold temperature enclosure safety code option ranges (TS) protection type ~ ~ = ~ = () (V) (V) (W) (W) ( ) (N 60) - - asic (P) TNK 0, /, -0 to +60 II G/D x d II+H T4/x td moulded IP Low (LP) ISS ()(4) , -40 to +0 II G x ia II T6/ II G x ia II T6 moulded IP Not available () Refer to the dimensional drawings on page. () safety parameters Min. operating current (I min. ): 0,07 (4) Intrinsically safe pilots: heck the electrical characteristics in the corresponding catalogue U option I = (D) I I P I L I I pages (ISS: pilot). (V) (m) (W) (µf) (mf) Low (LP) ISS (II G x ia II T6),6 0 0 ISS (II G x ia II T6),6 0 0 LTRIL ONNTIONS connection TNK /4" NPT threaded cable entry. nclosures are supplied without cable gland ISS Spade plug connector with cable gland N70-0 (ISO 4400) for cables with an outer diameter from 6 to mm DDITIONL OPTIONS TPL 0: ISS ( pilot), temperature class T4 Mounting on aluminium supply rail, /4 or / Other pipe threads are available on request INSTLLTION Installation/maintenance instructions are included with each valve The valves can be mounted in any position without affecting operation I 60 Functional Safety (Suffix SL), allowable temperature range: -40 to +60. Probability of failure on demand, contact us It is necessary to connect pipes or fittings to the exhaust ports to protect the internal parts of the valve if used outside or in harsh environments (dusts, liquids etc.) Threaded pipe connection identifier is: = NPT (NSI.0.); G = G (ISO /) x d ( "TNK") enclosure is provided with a /4" NPT threaded entry hole [optionally, /" NPT ( "T") or M0 x, ( "T")] and is supplied without cable gland Valves with suffix "SL" are provided with specific exhaust protectors ll leaflets are available on: /R0

12 SRIS - DIMNSIONS (mm), WIGHT (kg) Type 0-0: NOMO (Series ) 0 (06.0.0) Type 0: ir operated Series Series 0, 4 x /4 7, 4 G/ 4 0, x /4 0 7, 4 7, 4,6,4 x / 40, , 4 4, 4 G/4 7, mounting holes. mm dia.;spotfacing: mm dia., depth mm 6. mm dia.;spotfacing: mm dia., depth 6 mm 4,,6, 6, / MS / MS TYP 0: Prefix TNK: II GD, IP6, x d II + H asic 74 pilot, light alloy luminium, epoxy coated N and N 64- / MO / MO TYP 0: Prefix ISS: II G x ia II T6 - II G x ia II T6, IP6 Low pilot Polyamide I / ISO 4400 N G/ /4 NPT , 64, / ll leaflets are available on: -- TYP 0: No, IP6 [suffixes : GD (II GD c) ; SL (SIL) ; GDSL (SIL, II GD c) suffixe : GD (II GD c) ; SL (SIL) ; GDSL (SIL, II GD c)] ir operated version 4 G/ 0 4, 4 / G/4 4 6, x /4 7, 4 x / 40, 7, onnector rotatable by 0 increments (cable 6-0 mm) Manual operator location x d certified cable gland (on request) onnectable pilot exhaust port Non-connectable pilot exhaust port weight () type option level monostable bistable 0 TNK basic,66 -,60-0 ISS low,0 -, ,6, 0,,07 () Incl. connector(s), except FVT. SSORIS Ø Ø - / /4 / exhaust protector (stainless steel) PI-0-00-G -- vailability, design and specifications are subject to change without notice. ll rights reserved. 00/R0