SOLENOID VALVES pilot operated, spool type single/dual solenoid (mono/bistable function) aluminium body, 1/4-1/2

Transcription

1 SOLENOI VLVES pilot operated, spool type single/dual solenoid (mono/bistable function) aluminium body, /4 - / FETURES The monostable spool valves in conformity with IE 508 Standard (00 route H version) have TÜV (55 series) and EXI (55-55 series) certified with integrity levels: SIL for HFT = 0 / SIL for HFT = The spool valves / N have threaded port connections ll the exhaust ports of the spool valve are connectable, providing better environmental protection. Particularly recommended for sensitive areas, such as clean rooms, and applications in the pharmaceutical and food processing sectors The valves offer environmental protection against the ingress of liquids, dusts or other foreign matter (environmentally-protected construction) Ultra low level for inside application, suitable to connect to process fieldbus remote I/O or valve couplers The solenoid valves satisfy all relevant EU directives 0 / Series GENERL ifferential pressure Flow (Qv at bar) (a) - 0,4 bar [ bar =00 kpa] /4 = 80 l/min (NR) / = 800 l/min fluids ( ) temperature range (TS) seal materials ( ) air, inert gas, filtered -5 to +40 (a) -5 to +0 NR (nitrile) + PUR (polyurethane) With series 0 pilots, prefixes FS/FVT/FSIS/FSZN. MTERILS IN ONTT WITH FLUI ( ) Ensure that the compatibility of the fluids in contact with the materials is verified ody luminium, black anodised End cover (spring return) Glass-filled P Spool valve internal parts Zamak, stainless steel, POM, aluminium Pilot internal parts Size 0 (E ), refer to specific catalogue pages: 4/LPKF (contact us) - 95 (LIS) Pilots Size 5 (E0..0N), refer to specific catalogue pages: 0 (FS/FVT/FSIS/FSZN) - 0 piezotronic (PIS-PISIS) Pilot end covers luminium UP LP 0,00W - 0,5W 0,5W -,5W RP - MP P Not available 7,4W - 7,W Ultra Low Low Reduced and Medium asic SPEIFITIONS pipe size orifice size flow coefficient Kv operating pressure differential (bar) min.. level prefix optional solenoids max. (PS) TEX / IEEx IP5 air ( ) Ex db Ex ia Ex n NOMO size 0 basic catalogue number ( ) (mm) (m /h) (l/min) ~ = ~/= () LIS FSIS PISIS FSZN FS PIS Solenoid air pilot operated - spring return (monostable) /4 0,75,5 0 0 LP m () /4 0,75,5-8 LP - - m () /4 0,75,5 0 0 P () - /4 0,75,5-8 LP - m () - /4 0,75,5 8 8 UP m () /,5 5,5 0 0 LP m () /,5 5,5-8 LP - - m () /,5 5,5 0 0 P () - /,5 5,5-8 LP - m () - /,5 5,5 8 8 UP m () Select 8 for NPT NSI.0. or select G for ISO G (8/) vailable feature vailable feature in only. - Not available () 4/LPKF: ontact us () ertified IE 508 Functional Safety data, use suffix "SL". POWER LEVELS - cold electrical holding values (watt) NOMO size 5 ll leaflets are available on: Process Industry G-08/R0

2 SPEIFITIONS pipe size orifice size flow coefficient Kv operating pressure differential (bar) min.. level prefix optional solenoids max. (PS) TEX / IEEx IP5 air ( ) Ex db Ex ia Ex n NOMO size 0 SERIES basic catalogue number ( ) (mm) (m /h) (l/min) ~ = ~/= () LIS FSIS PISIS FSZN FS PIS Solenoid air pilot operated and return (bistable) /4 0,75,5 0 0 LP m /4 0,75,5-8 LP - - m /4 0,75,5 0 0 P /4 0,75,5-8 LP - m /4 0,75,5 8 8 UP m /,5 5,5 0 0 LP m /,5 5,5-8 LP - - m /,5 5,5 0 0 P /,5 5,5-8 LP - m /,5 5,5 8 8 UP m Select 8 for NPT NSI.0. or select G for ISO G (8/) vailable feature vailable feature in only. - Not available NOMO size 5 PREFIX TLE prefix level description UP LP RP P NOMO solenoid (pilot) interface size 0 L I S Intrinsically safe - 95 pilot (EN/IE 0079-)* - m - - () Flameproof - luminium - 4/LPKF pilot (EN/IE 0079-, 0079-)* NOMO solenoid (pilot) interface size 5 F S Solenoid + spade plug MP,5x0,5, 9,4 mm, (EN 070), 0 pilot F V T Solenoid with M connection, LE + protection (EN 070), 0 pilot - m - - F S I S Intrinsically safe, 9,4 mm, pilot 0; TEX (EN/IE 0079-, -)* - m - - F S Z N Non sparking, connector 9,4 mm cable m, pilot 0 (EN , -) * - m - - P I S Solenoid with spade plug connector (EN 070), 0 piezotronic pilot P I S I S Intrinsically safe, piezotronic 0 pilot, TEX (EN/IE 0079-, -) * m SUFFIX TLE suffix level description UP LP RP P NOMO solenoid (pilot) interface size 0 M S Screw type manual operator () () S L ertified IE 508 Functional Safety data (4) - m - NOMO solenoid (pilot) interface size 5 M S Screw type manual operator () M O Push type manual operator / / - - S L ertified IE 508 Functional Safety data (4) / / - - PROUT SELETION GUIE STEP Select basic catalogue number, including pipe thread indentification letter. Refer to the specifications table on page: or Example: G55505 STEP Select prefix (combination). Refer to the specifications table and the prefix table, respect the indicated level. Example: FS STEP Select suffix. Refer to the suffix table, respect the indicated level. Suffix MO mandatory for the pilot 0 (FSIS/ FSIS/FVTIS/FSZN/FVTZN). Example: MO STEP 4 Selection of TPL is mandatory for the 0 pilot (PISIS), HV ( mw) and 4 HV (5 mw). dd "X" between the prefix "PISIS" and the basic catalogue number. STEP 5 Select voltage. Refer to standard voltages on page: Example: 0V / 50Hz STEP Final catalogue / ordering number Example: FSG55505MO 0 V / 50 Hz OPTIONS & ESSORIES series pipe size exhaust protector (stainless steel) (G) (NPT) - 55/55 / (5) (5) - 55 / (5) (5) - 55 / (5) (5) - 55/ (5) vailable feature vailable feature in only - Not available * TEX/IEEx valves using these solenoids are approved according to EN 4- (non electrical) () 4/LPK: ontact us () Not to use with SL suffix () Not to use with LIS prefix (4) Not to use with MS suffix (5) Provided with "SL" suffix ll leaflets are available on: - Process Industry ORERING EXMPLES VLVES: LIS G V / FS G V / 50 Hz FS MO 0V / 50 Hz FS G SLMO 0V / 50 Hz FVTZN G V / PISIS G MO V / PISIS G SLMO V / PISIS X G MO TPL0 4HV / prefix voltage pipe thread TPL basic number suffix 8005G-08/R0

3 EXPLNTION OF TEMPERTURE RNGES OF SOLENOI VLVES Valve temperature range The valve temperature range (TS) is determined by the selected seal material, the temperature range for proper operation of the valve and sometimes by the fluid (e.g. steam) Operator ambient temperature range The operator ambient temperature range is determined by the selected level and the safety code Total temperature range The temperature range of the complete solenoid valve is determined by the limitations of both temperature ranges above ELETRIL HRTERISTIS oil insulation class F Electrical safety IE 5 Standard voltages (=) (8) : 4V - 48V ; FS/FSZN/FVT: 4V FSIS: V - 4V ; LIS:..4V, PIS: 4V to 70V ; PISIS: V, 8V, V, 4V (~) (8) : 4V - 48V - 5V - 0V/50Hz ; FS: 4V - 5V - 0V/50Hz ; PIS: 4V to 70V - other voltages and 0Hz are available on request ratings operator electrical ambient replacement coil prefix inrush holding hot/cold temperature enclosure safety code option ~ ~ = range (TS) protection ~ = (V) (V) (W) (W) ( ) (EN 059) - - type () asic (P) (8) 8,, 7,4 /7, -5 to +80 IIG Ex db II+H Gb T4, II Ex tb III b IP/7, alu Low Power (LP) FS,4,, /, -5 to +0 EN 070 IP5, moulded FS, (7), (7),5 (7) - -5 to +0 EN 070 IP5, moulded FVT () - - -,5/,5-5 to +0 EN 070 IP5, moulded FSZN /, -5 to +40/55/0 II G Ex n II T/T5/T4 Gc, II Ex tc III c IP5, moulded FSIS (4)(5) ,5-0 to +40/0 II G Ex ia II T/T4 Ga, II Ex ia III a IP5, moulded LIS ()(4) ,5-40 to +5 II G Ex ia II T Ga, II Ex ib III b () IP5, moulded Ultra low (UP) PIS ,007 0 to +0 - IP5, moulded PISIS ()(4) V ,00-0 to +50 II G Ex ia II T Ga, II Ex ia III a IP5, moulded PISIS ()(4) 8V ,0-0 to +50 II G Ex ia II T Ga, II Ex ia III a IP5, moulded PISIS ()(4) LV ,0-0 to +50 II G Ex ia II T Ga, II Ex ia III a IP5, moulded PISIS ()(4) HV ,0-0 to +50 II G Ex ia II T Ga, II Ex ia III a IP5, moulded PISIS ()(4) 4LV ,04-0 to +50 II G Ex ia II T Ga, II Ex ia III a IP5, moulded PISIS ()(4) 4HV ,5-0 to +50 II G Ex ia II T Ga, II Ex ia III a IP5, moulded () Piezotronic standard voltages: PIS prefix, 4 V to 70 V /, peak current max.: 80 m, holding current max.: m PISIS prefix: V / mw 8 V / mw L V / mw H V / mw 4L V / 4 mw 4H V / 5 mw Turn ON voltage U ON.. 9 V 7,.. V 0,8.. V 0,8.. V,.. 8 V,.. 8 V Turn OFF voltage U OFF V, V, V, V 5 V 5 V Peak current m 0 m,8 m 8, m 0 m 4 m Holding current 0,5 m,8 m m,7 m,9 m 5, m able + max. barrier resistances (R S + R ) 00 Ω max. 00 Ω max. 00 Ω max. 470 Ω max. 00 Ω max. 470 Ω max. () safety parameters Refer to the dimensional drawings on pages: 4 to 7 () prefix Min. operating current (I(ON) min.): 0,0 / U (ON) min. =,8 V (For use in zone 0 locations, see the installation conditions given in the I&M instructions) option U I = () I I P I L I I (V) (m) (W) (H) (µf) Low Power (LP) FSIS 8 00, 0 0 LIS 0 00, 0 0 Ultra low (UP) PISIS ,9 0 0 (4) Intrinsically safe pilots: heck the electrical characteristics in the corresponding catalogue pages (FSIS/LIS/PISIS: 0/95000/0 pilots). (5) FSIS (0 pilots): V: I (ON) min., with LE = m; U (ON) min.=,9 V; U (max.) recommended = V; U (OFF) =, V; I (OFF) = 0 m 4 V: I (ON) min., with LE = 5 m; U (ON) min.=,4 V; U (max.) recommended = 8 V; U (OFF) = 5,7 V; I (OFF) = 7 m () Values for LE + protection. (7) : 0V (8) 4/LPK: ontact us - Not available ELETRIL ONNETIONS prefix connection (8) /" NPT threaded cable entry. Enclosures are supplied without cable gland LIS Spade plug connector with cable gland EN (ISO 4400) for cables with an outer diameter from to 8 mm FS, FSIS, PIS, PISIS Spade plug connector with cable gland IN 450, 9,4 mm, form, for cables with an outer diameter from 4 to mm FSZN Spade plug connector, IN 450, 9,4 mm, form, pre-wired connector length m FVT M connection for M connector FL Moulded-in flying lead, standard length 0, m SERIES ITIONL OPTIONS TPL numbers: TPL 05: Piezotronic, PISIS prefix, HV ( mw); TPL 0: Piezotronic, PISIS prefix, 4 HV (5 mw) TPL 074: LE and protection, FS prefix, only available in 4 V / and 5 V - dd 0,5 W () and 0,4 W/V () Other pipe threads are available on request INSTLLTION Multi language installation/maintenance instructions are included with each valve The valves can be mounted in any position without affecting operation o not connect the pressure supply to the exhaust port. The environmentally-protected construction is not adapted for a distributing function or use in NO function. ontact us for functions available in specific versions IE 508 Functional Safety (suffix SL). heck temperature range of valve body and solenoid for suitability. For probability of failure, contact us It is necessary to connect pipes or fittings to the exhaust ports to protect the internal parts of the spool valve and its pneumatic operator if used outside or in harsh environments (dusts, liquids etc.) Threaded pipe connection identifier is 8 = NPT (NSI.0.); G = G (ISO 8/) Valves with suffix "SL" are provided with specific exhaust protectors ll leaflets are available on: Process Industry G-08/R0

4 SERIES IMENSIONS (mm), WEIGHT Types: 0-0 (55 Series) Types: (55 Series) Types: (55 Series) 5 x /4 7,5 48,5,9 45 = = x / (55) 78,5 40, 45 49,4 x G/4,8,55 5 7, 9,5,5 4 09,5 8 7,5 TYPE 0: 4 pilot/lpkf operator EN/IE 0079-, TYPE 0: luminium 95/LIS: EN /55: ontact us 5505 / / 0 /8 NPT / NPT = = 74, (55), 4,5 9,4 (55) mounting holes: 5, mm dia.; Spotfacing: 9 mm dia., depth 5 mm mounting holes:,5 mm dia.; Spotfacing: mm dia., depth mm ,5 TYPE 0: Polyarylamide 0 pilot FS: IE 5 / IN / MS / 55505MO / 50MS / 50MO / 505MS / 505MO / 50 / 50MS / 50MO 0 9 ll leaflets are available on: Process Industry 8005G-08/R0

5 80 SERIES IMENSIONS (mm), WEIGHT TYPE 04: Polyarylamide 0 pilot FVT: IE 5 / M connection + LE and protection / MS / 55505MO / 50MS / 50MO / 505MS / 505MO / 50 / 50MS / 50MO 49, TYPE 05: Polyamide Piezotronic pilot PIS: IE 5 / IN 450 PISIS: EN/IE 0079-, MO / 5550MO 55505MO / 50MO TYPE 0: Polyarylamide 0 pilot FSZN: EN , MO / 5550MO 55505MO / 50MO ll leaflets are available on: G-08/R0 Process Industry - 5

6 SERIES IMENSIONS (mm), WEIGHT TYPE 07: Polyarylamide 0 pilot FSIS: EN/IE 0079-, MO / 5550MO 55505MO / 50MO Ex d certified cable gland (on request) Three-core cable, length m onnector rotatable by 90 increments, cable Ø 4 - mm 4 onnector rotatable by 90 increments, cable Ø - 8 mm 5 Screw type manual operator, suffix MS Push type manual operator, suffix MO onnectable pilot exhaust port type prefix/option level weight () monostable bistable /LPKF () P 85 9, ,7 74 8,7,9,94,9,0 0 LIS LP 4 04, ,5 45 7, 0,59,4 0,80,4 0 FS LP - 4, , - 7, 0,,00 0,8,08 04 FVT LP - 4, , - 7, 0,,00 0,8,08 05 PIS / PISIS UP - 4, , - 7, 0,,00 0,,08 0 FSZN LP - 4, , - 7, 0,4,08 0,54,4 07 FSIS LP - 4, , - 7, 0,4,0 0,4, () Incl. coil(s) and connector(s). () 4/LPK: ontact us ESSORIES Ø Ø /8 /4 /8 / 4,5-4 exhaust protector (stainless steel) ll leaflets are available on: G-08/R0 - Process Industry

7 SERIES ESSORIES (55 Series) Supply rail (supplied with seals and banjo bolts, without mounting brackets) supply rail with isolation valves with mounting brackets (llows the isolation of one or more valves from the general pressure supply) supply rail for "n" valves catalogue number supply rail catalogue number G /4 NPT /4 for "n" valves G /4 NPT () () vailable on request / Series number of valves E type weight (kg) 0, monostable/bistable 0,9/,/,4,5/,9,9/,,/,7,5/,,8/,5 04, monostable/bistable 0,9/,/,4,5/,9,9/,,/,7,5/,,8/,5 05, monostable/bistable 0,8/0,9,94/,8,4/,74,8/,,08/,4,/,8,4/,8 0, monostable/bistable 0,9/,/,4,5/,9,9/,,/,7,5/,,8/,5 07, monostable/bistable 0,9/,0,/,4,54/,98,95/,4,/,8,57/,4,88/, mounting brackets () series catalogue number () Set of two mounting brackets IMENSIONS (mm), WEIGHT TYPES: supply rail with isolation valves with mounting brackets G /8) ,5 97, ,5 87,5 E 4Ø,5 This mounting arrangement allows valves to be mounted in the positions bellow Not possible with supply rail and isolation valves 0 Supply rail with isolation valves Only with supply rail with isolation valves ll leaflets are available on: Process Industry G-08/R0

8 SERIES ll leaflets are available on: Process Industry vailability, design and specifications are subject to change without notice. ll rights reserved. 8005G-08/R0