HMC320MS8G / 320MS8GE. Features OBSOLETE. = +25 C, Vdd = +3V
|
|
- Corey Hopkins
- 5 years ago
- Views:
Transcription
1 Typical Applications The HMCMSG(E) is ideal for: UNII HiperLAN Functional Diagram v. Electrical Specifications, T A = + C, Vdd = +V HMCMSG / MSGE Features General Description Selectable Functionality: LNA, Driver, or LO Buffer Amp Adjustable Input IP Up to +1 dbm +V Operation Ultra Small Lead MSOP: 1. x 1. x 1 mm The HMCMSG & HMCMSGE are low cost C-band fi xed gain Low Noise Amplifi ers (LNA). The HMCMSG & HMCMSGE operate using a single positive supply that can be set between +V and +V. With +V bias, the LNA provides a noise fi gure of. db, 1 db gain and better than 1 db return loss across the UNII band. The HMCMSG & HMCMSGE also feature an adaptive baising that allows the user to select the optimal P1dB performance for their system using an external set resistor on the RES pin. P1dB performance can be set between a range of +1 dbm to +1 dbm. The low cost LNA uses an -leaded MSOP ground base surface mount plastic package, which occupies less than 1. mm. Parameter Low Power* (VSET = V, Idd = 7 ma) Medium Power* (VSET = V, Idd = ma) High Power* (VSET = V, Idd = ma) Units Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Frequency Range GHz Gain db Gain Variation over Temperature db/ C Gain Flatness ±. ±1. ±1. db Noise Figure db Input Return Loss db Output Return Loss db Output Power for 1 db Compression (P1dB) dbm Input Third Order Intercept Point (IIP) dbm Supply Current (Idd) 7 ma * RBIAS resistor value sets current. See adaptive biasing application note. - One Technology Way, P.O. Box 916, Norwood, MA Phone: Order online at Alpha Road, Chelmsford, MA 1 Phone: 97-- Fax: Application Support: Phone: 1--ANALOG-D
2 Broadband Gain & Return Loss RESPONSE (db) Gain vs. Temperature GAIN (db) Noise Figure vs. Temperature NOISE FIGURE (db) C + C - C S11 S1 S 1 + C + C - C v. HMCMSG / MSGE Gain GAIN (db) Input Return Loss RETURN LOSS (db) Output Return Loss RETURN LOSS (db) One Technology Way, P.O. Box 916, Norwood, MA Phone: Order online at Alpha Road, Chelmsford, MA 1 Phone: 97-- Fax: Application Support: Phone: 1--ANALOG-D - 1
3 Noise Figure NOISE FIGURE (db) Output 1dB Compression P1dB (dbm) v. HMCMSG / MSGE Input IP IP (dbm) Reverse Isolation REVERSE ISOLATION (db) One Technology Way, P.O. Box 916, Norwood, MA Phone: Order online at Alpha Road, Chelmsford, MA 1 Phone: 97-- Fax: Application Support: Phone: 1--ANALOG-D
4 Adaptive Biasing Optimizing P1dB Performance The bias level may be changed to adjust the P1dB and return loss performance. The table below contains the HMC- MSG RF performance as a function of various VSET and RBIAS settings. It will be necessary for the VSET voltage source to provide 1uA of current to the amplifi er. The Idd and Vdd quiescent performance will not change as a function of changing the VSET voltage. RF Performance at. GHz (Vdd = +V) VSET (VDC) Applying the adaptive biasing A dynamically controlled bias can be implemented with this design. A typical application wil include sensing an RF signal level and then adjusting the VSET. The bias adjustment can be accomplished by either analog or digitals means, after the RF signal has been detected and translated to a DC voltage using external power detection circuitry. Schematic RBIAS Resistor Between Pin and GND (Ohms) Idd (ma) Output P1dB (dbm) Output Return Loss (db) GND (No Resistor) v. HMCMSG / MSGE One Technology Way, P.O. Box 916, Norwood, MA Phone: Order online at Alpha Road, Chelmsford, MA 1 Phone: 97-- Fax: Application Support: Phone: 1--ANALOG-D -
5 Absolute Maximum Ratings v. HMCMSG / MSGE Truth Table Drain Bias Voltage (Vdd) +7. Vdc Control Voltage Range (VSET) to Vdd RF Input Power (RFIN)(Vdd = +. Vdc) + dbm Channel Temperature 1 C Continuous Pdiss (T = C) (derate.9 mw/ C above C).19 W Thermal Resistance (channel to ground paddle) Outline Drawing 6 C/W Storage Temperature -6 to +1 C Operating Temperature - to + C ESD Sensitivity (HBM) Class 1A VSET Operating Current Idd Operating State Resistor Rbias V 7 ma Low Power 17 Ohm V ma Medium Power Ohm V ma High Power 7 Ohm Set external bias resistor (RBIAS) to achieve desired operating current, < RBIAS < Ohm. ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY. DIMENSIONS ARE IN INCHES [MILLIMETERS]. DIMENSION DOES NOT INCLUDE MOLDFLASH OF.1mm PER SIDE.. DIMENSION DOES NOT INCLUDE MOLDFLASH OF.mm PER SIDE.. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating Package Marking [] [1] H HMCMSG Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 XXXX [] H HMCMSGE RoHS-compliant Low Stress Injection Molded Plastic 1% matte Sn MSL1 XXXX [1] Max peak refl ow temperature of C [] Max peak refl ow temperature of 6 C [] -Digit lot number XXXX - One Technology Way, P.O. Box 916, Norwood, MA Phone: Order online at Alpha Road, Chelmsford, MA 1 Phone: 97-- Fax: Application Support: Phone: 1--ANALOG-D
6 HMCMSG / MSGE Evaluation PCB v. List of Materials for Evaluation PCB 197 [1] Item Description J1, J PCB Mount SMA Connector J, J, J DC Pins R1 U1 PCB [] Ohm Resistor, 6 Pkg. HMCMSG / HMCMSGE Amplifi er 19 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [] Circuit Board Material: Rogers The circuit board used in the fi nal application should use RF circuit design techniques. Signal lines should have ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. One Technology Way, P.O. Box 916, Norwood, MA Phone: Order online at Alpha Road, Chelmsford, MA 1 Phone: 97-- Fax: Application Support: Phone: 1--ANALOG-D -
Features. = +25 C, Vdd= +3V. Parameter Min. Typ. Max. Units Frequency Range GHz Gain db
7 Typical Applications The HMC286 / HMC286E is ideal for: BlueTooth Home RF 82.11 WLAN Radios PCMCIA Platforms Functional Diagram v3.41 Features 2.4 GHz LNA Noise Figure: 1.7 db Gain: 19 db Single Supply:
More informationHMC310MS8G / 310MS8GE. Features OBSOLETE. = +25 C, Vdd = +3V
Typical Applications Transmit & Receive Switch for 2. GHz Applications: Bluetooth HomeRF WLAN Radios Functional Diagram v3.67 Electrical Specifications, T A = +25 C, Vdd = +3V HMC31MSG / 31MSGE Features
More informationFeatures OBSOLETE. = +25 C, as a function of Vdd. Vdd = +3V Vdd = +5V Vdd = +5V Vdd = +5V Parameter
v5.117 HMC3 / 3E GENERAL PURPOSE 1 mw GaAs MMIC AMPLIFIER,. - 3. GHz Typical Applications Broadband or Narrow Band Applications: Cellular/PCS/3G Fixed Wireless & Telematics Cable Modem Termination Systems
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK Typical Applications Transmit & Receive
More informationHMC471MS8G / 471MS8GE. Features OBSOLETE. DC GHz GHz GHz GHz GHz
v1.65 Typical Applications The HMC471MSG / HMC471MSGE is a dual RF/IF gain block & LO or PA driver: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment Functional
More informationTEL: FAX: v.117 HMC3 / 3E GENERAL PURPOSE 1 mw GaAs MMIC AMPLIFIER, GHz Broadband Gain & Return Vdd =
TEL:7-339622 FAX:7-337612 E-MAIL: szss@3.com v.117 HMC3 / 3E GENERAL PURPOSE 1 mw GaAs MMIC AMPLIFIER,. - 3. GHz Typical Applications Broadband or Narrow Band Applications: Cellular/PCS/3G Fixed Wireless
More informationFeatures. = +25 C, Vdd = +5V, Rbias = 10 Ohms*
Typical Applications Functional Diagram The HMC36LP3 / HMC36LP3E is ideal for: Cellular/3G Infrastructure Base Stations & Repeaters CDMA, W-CDMA, & TD-SCDMA Private Land Mobile Radio GSM/GPRS & EDGE UHF
More informationHMC346MS8G / 346MS8GE
Typical Applications v7.18 Features This attenuator is ideal for use as a VVA for DC - 8 GHz applications: Point-to-Point Radio VSAT Radio Functional Diagram Wide Bandwidth: DC - 8 GHz Low Phase Shift
More informationFeatures
HMC37SC7E v1.1.3-3. GHz Typical Applications The HMC37SC7E is ideal for: Cellular/PCS/3G WCS, mmds & ism Fixed Wireless & WLAN Private Land Mobile Radio Functional Diagram Features Single Supply: Vdd =
More informationHMC326MS8G / 326MS8GE
v9.511 AMPLIFIER, 3. - 4.5 GHz Typical Applications The HMC326MS8G / HMC326MS8GE is ideal for: Microwave Radios Broadband Radio Systems Wireless Local Loop Driver Amplifier Functional Diagram Features
More informationHMC486LP5 / 486LP5E LINEAR & POWER AMPLIFIERS - SMT. SURFACE MOUNT PHEMT 2 WATT POWER AMPLIFIER, 7-9 GHz. Typical Applications.
v2. Typical Applications The HMC486LP5(E) is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment and Sensors Military End-Use Features Saturated Power: +33 dbm @ 2% PAE Output IP3:
More informationHMC546MS8G / 546MS8GE
v6.89 HMC546MS8G / 546MS8GE GaAs MMIC 2W FAILSAFE SWITCH.2-2.2 GHz Typical Applications The HMC546MS8G(E) is ideal for: LNA Protection, WiMAX, WiBro Cellular/PCS/3G Infrastructure Private Mobile Radio
More informationFeatures OBSOLETE. = +25 C, Rbias = 0 Ohm. Bypass Mode Failsafe Mode Parameter
7 Typical Applications The HMC668LP3(E) is ideal for: Cellular/3G and LTE/WiMAX/4G BTS & Infrastructure Repeaters and Femtocells Tower Mounted Amplifiers Test & Measurement Equipment Functional Diagram
More informationFeatures OBSOLETE. Isolation DC GHz db
Typical Applications Features - 224 The is ideal for: Cellular / 4G Infrastructure WiMAX, WiBro & Fixed Wireless Automotive Telematics Mobile Radio Test Equipment Functional Diagram Input P1dB: + @ Vdd
More informationFeatures OBSOLETE. Saturated Output Power (Psat) dbm Output Third Order Intercept (IP3) dbm Supply Current (Idd) ma
7 Typical Applications The HMC667LP2(E) is ideal for: WiMAX, WiBro & Fixed Wireless SDARS & WLAN Receivers Infrastructure & Repeaters Access Points Telematics & DMB Functional Diagram v2.11 Electrical
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v3.38 POWER AMPLIFIER, 2-2 GHz Typical
More informationFeatures. = +25 C, Vs = +5V. Parameter Min. Typ. Max. Min. Typ. Max. Units Frequency Range MHz Gain
Typical Applications Functional Diagram The HMC32LP3 / HMC32LP3E is ideal for basestation receivers: GSM, GPRS & EDGE CDMA & W-CDMA Private Land Mobile Radio HMC32LP3 / 32LP3E AMPLIFIER, 00-1000 MHz Features
More informationFeatures. = +25 C, Vdd = +5 Vdc, 50 Ohm System
v4.19 Typical Applications The HMC174MS8(E) is ideal for: Infrastructure & Repeaters Cellular/3G & WiMAX Portable Wireless LNA Protection Automotive Telematics Test Equipment Features Low Insertion Loss:.5
More informationFeatures OBSOLETE. = +25 C, Vdd = +3.3 Vdc, 50 Ohm System
Typical Applications v1.1 ATTENUATOR,.4-2.2 GHz Features The HMC473MS8 / HMC473MS8E is ideal for: Cellular, UMTS/3G Infrastructure Portable Wireless GPS Functional Diagram RoHS Compliant Product Single
More informationFeatures. = +25 C, Vss= -5V, Vdd= +5V, Control Voltage= 0/ +5V, 50 Ohm System. Frequency Range GHz Insertion Loss* 4 6.
v1.28 HMC647LP6 / 647LP6E Typical Applications The HMC647LP6(E) is ideal for: EW Receivers Weather & Military Radar Satellite Communications Beamforming Modules Phase Cancellation Functional Diagram Features
More informationFeatures OBSOLETE. = +25 C, 50 Ohm System GHz degrees Insertion Loss 6-15 GHz 8 11 db. Return Loss (Input and Output) 6-15 GHz 7 db
v2.29 6 ANALOG PHASE SHIFTER, 1 Typical Applications The HMC538LP4 / HMC538LP4E is ideal for: Fiber Optics Military Test Equipment Functional Diagram Features Electrical Specifications, T A = +25 C, 5
More informationHMC336MS8G / 336MS8GE. Features OBSOLETE. = +25 C, With 0/+5V Control, 50 Ohm System
Typical Applications This switch is suitable for usage in 50- Ohm or 75-Ohm systems: Broadband Fiber Optics Switched Filter Banks Wireless below 6.0 GHz Functional Diagram Features Broadband Performance:
More informationHMC368LP4 / 368LP4E FREQ. MULTIPLIERS - ACTIVE - SMT. SMT GaAs PHEMT MMIC AMP-DOUBLER-AMP, 9-16 GHz OUTPUT. Typical Applications.
v3.5 Typical Applications Microwave Radios & VSAT Fiber Optic Infrastructure Military Communications & Radar Functional Diagram Features Output Power: +15 dbm Wide Input Power Range: to +1 dbm 1 khz SSB
More informationFeatures. = +25 C, Vdd = +7V, Idd = 1340 ma [1]
Typical Applications The HMC591LP5 / HMC591LP5E is ideal for use as a power amplifi er for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment & Sensors Military End-Use Space Features Saturated
More informationFeatures. Parameter Frequency Min. Typ. Max. Units DC GHz DC GHz DC GHz DC GHz DC GHz Isolation DC - 4.
Typical Applications The is ideal for: Cellular / 4G Infrastructure WiMAX, WiBro & Fixed Wireless Automotive Telematics Mobile Radio Test Equipment Features Input P1: +40 @ Vdd = +8V High Third Order Intercept:
More informationFeatures OBSOLETE. Parameter Min. Typ. Max. Units. Frequency Range GHz Insertion Loss 5 7 db. Input Return Loss 16 db
v1.611 Typical Applications The is ideal for: EW Receivers Weather & Military Radar Satellite Communications Beamforming Modules Phase Cancellation Functional Diagram Features Low RMS Phase Error: 1.2
More informationHMC270MS8G / 270MS8GE
Typical Applications The HMC270MS8G / HMC270MS8GE is ideal for applications: CATV MMDS & WirelessLAN Wireless Local Loop Features Broadband Performance: DC - 8 GHz Very High Isolation: 45 @ 6 GHz Non-Refl
More informationFeatures. = +25 C, Vdd = +5V, 5 dbm Drive Level
v1.4 Typical Applications The HMC561LP3E are suitable for: Clock Generation Applications: SONET OC-192 & SDH STM-64 Point-to-Point & VSAT Radios Test Instrumentation Military & Space Functional Diagram
More informationGain Control Range db
v1.112-12 GHz Typical Applications The is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM Subsystems X-Band Radar Test Equipment & Sensors Functional Diagram Features Wide Gain Control
More informationHMC480ST89 / 480ST89E
v2.7 HMCST9 / ST9E Typical Applications The HMCST9 / HMCST9E is an ideal RF/IF gain block & LO or PA driver for: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test
More informationFeatures. Parameter Frequency Min. Typ. Max. Units Insertion Loss DC GHz db. DC GHz
v1.11 HMC55 / 55E Typical Applications The HMC55 / HMC55E is ideal for: RFID & Electronic Toll Collection (etc) Tags, Handsets & Portables ISM, WLAN, WiMAX & WiBro Automotive Telematics Test Equipment
More informationHMC307QS16G / 307QS16GE. Features OBSOLETE. = +25 C, Vee = -5V & VCTL= 0/Vee. Parameter Frequency Min. Typical Max. Units DC - 1.
5 Typical Applications v8.98 HMC37QS16G / 37QS16GE 1 LSB GaAs MMIC 5-BIT DIGITAL Features The HMC37QS16G(E) is ideal for: Cellular PCS, ISM, MMDS Wireless Local Loop Functional Diagram 1 LSB Steps to 31
More informationOBSOLETE. Parameter Frequency (GHz) Min. Typ. Max. Units DC GHz GHz. Attenuation Range DC - 3 GHz 31 db
5 Typical Applications The HMC47LP3(E) is ideal for: Cellular; UMTS/3G Infrastructure ISM, MMDS, WLAN, WiMAX Microwave Radio & VSAT Test Equipment and Sensors Functional Diagram HMC47LP3 / 47LP3E v4.118
More informationFeatures OBSOLETE. = +25 C, Vdd = +3V to +5V & Vctl = 0/Vdd (Unless Otherwise Stated) Parameter Frequency Min. Typical Max. Units
Typical Applications The HMC288MS8 / HMC288MS8E is ideal for: Cellular PCS, ISM, MMDS WLL applications Functional Diagram 2 LSB GaAs MMIC 3-BIT DIGITAL ATTENUATOR,.7-3.7 GHz Features 2 LSB Steps to 14
More informationHMC245QS16 / 245QS16E. Features OBSOLETE. Parameter Frequency Min. Typ. Max. Units. DC GHz DC GHz DC GHz
Typical Applications The HMC245QS16 / HMC245QS16E is ideal for: Basestation Infrastructure CATV / DBS Wireless Local Loop Test Equipment Functional Diagram Features Low Insertion Loss:.5 @ 2. GHz Non-Refl
More informationHMC694LP4 / 694LP4E. Variable gain amplifiers - ANALOG - smt. GaAs MMIC ANALOG VARIABLE GAIN AMPLIFIER, 6-17 GHz. Typical Applications
v2.1 Typical Applications The HMC694LP4(E) is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM X-Band Radar Test Equipment Features Wide Gain Control Range: 23 db Single Control Voltage
More informationParameter Min. Typ. Max. Units Frequency Range GHz
v.312 27-31. GHz Typical Applications The is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM Subsystems Ka-Band Radar & VSAT Test Equipment Functional Diagram Features Wide Gain Control
More informationFeatures. Parameter Frequency Min. Typ. Max. Units Insertion Loss DC GHz db
v.1212 HMC55A / 55AE Typical Applications The HMC55A / HMC55AE is ideal for: RFID & Electronic Toll Collection (ETC) Tags, Handsets & Portables ISM, WLAN, WiMAX & WiBro Automotive Telematics Test Equipment
More informationHMC284MS8G / 284MS8GE
HMC284MS8G / 284MS8GE v06.0607 Typical Applications The HMC284MS8G / HMC284MS8GE is ideal for: Cellular/PCS Base Stations 2.4 GHz ISM 3.5 GHz Wireless Local Loop Features High Isolation: >45 Positive control:
More informationFeatures OBSOLETE. = +25 C, 50 Ohm System, Vcc= 3V
Typical Applications Prescaler for DC to 4. GHz PLL Applications: DBS/CATV Tuners 82.11x & HiperLAN WLAN Fixed Wireless & WLL Microwave & VSAT Radios Cellular & 3G Functional Diagram v.93 HMC42MS8 / 42MS8E
More informationFeatures. = +25 C, Vctl = 0/+5 Vdc, 50 Ohm System RF1 / RF2 RF1 / RF2. trise, tfall (10/90% RF) ton, toff (50% CTL to 10/90% RF)
HMC194MS8 / 194MS8E Typical Applications The HMC194MS8 /HMC194MS8E is ideal for: Cellular/PCS Base Stations Portable Wireless MMDS & WirelessLAN Features Ultra Small Package: MSOP8 High Isolation: 5 Positive
More informationFeatures. = +25 C, Vdd= 5V. Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz
Typical Applications The HMC62LP / HMC62LPE Wideband LNA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military EW, ECM & C 3 I Test Instrumentation Fiber Optics Functional Diagram Features
More informationHMC589ST89 / 589ST89E. Features OBSOLETE. DC GHz GHz GHz. db Gain 22
v.71 HMC59ST9 / 59ST9E Typical Applications The HMC59ST9 / HMC59ST9E is ideal for: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment IF & RF Applications
More informationHMC437MS8G / 437MS8GE
v5.1211 HMC37MS8G / 37MS8GE Typical Applications Prescaler for DC to C Band PLL Applications: UNII, Point-to-Point & VSAT Radios 82.11a & HiperLAN WLAN Fiber Optic Cellular / 3G Infrastructure Functional
More informationFeatures OBSOLETE. DC GHz GHz GHz GHz GHz
v2.71 HMC75ST9 / 75ST9E Typical Applications The HMC75ST9 / HMC75ST9E is an ideal RF/IF gain block & LO or PA driver: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio &
More informationHMC639ST89 / 639ST89E
Typical Applications The HMC39ST9(E) is ideal for: Cellular / PCS / 3G WiMAX, WiBro, & Fixed Wireless CATV & Cable Modem Microwave Radio IF and RF Sections Functional Diagram Electrical Specifications,
More informationSURFACE MOUNT PHEMT 2 WATT POWER AMPLIFIER,
v2.617 AMPLIFIER, - 12 GHz Typical Applications The is ideal for use as a power amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment and Sensors Military End-Use Features Saturated
More informationFeatures OBSOLETE. = +25 C, Vctl = 0/+8 Vdc, 50 Ohm System. Parameter Frequency* Min. Typ. Max. Units Tx - RFC MHz db.
GaAs MMIC 1W T/R Typical Applications Features 1 The HMC446 / HMC446E is ideal for: ISM/Cellular Portables/Handsets Automotive Telematic Applications Mobile Radio Functional Diagram Low Insertion Loss:.6
More informationHMC618ALP3E AMPLIFIERS - LOW NOISE - SMT. GaAs SMT phemt LOW NOISE AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram
7 Typical Applications The is ideal for: Cellular/3G and LTE/WiMAX/4G BTS & Infrastructure Repeaters and Femto Cells Public Safety Radios Functional Diagram v. Electrical Specifications T A = + C, Rbias
More informationHMC1040LP3CE. Amplifiers - Low Noise - smt. GaAs phemt MMIC LOW NOISE AMPLIFIER, GHz. Features. Typical Applications. General Description
v.112 HMC14LP3CE AMPLIFIER, 24-43. GHz Typical Applications This HMC14LP3BE is ideal for: Point-to-Point Radios Test Instrumentation SatCom Transponders & VSAT Industrial Sensors EW & ECM Subsystems Functional
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v2.49 Typical Applications The HMC536LP2(E)
More informationAnalog Devices Welcomes Hittite Microwave Corporation
Analog Devices Welcomes Hittite Microwave Corporation www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.915 GaAs MMIC 6-BIT DIGITAL Typical Applications The HMC648ALP6E is ideal for:
More informationHMC358MS8G / 358MS8GE
Typical Applications Low noise MMIC VCO w/buffer Amplifi er for C-Band applications such as: UNII & Pt. to Pt. Radios 802.a & HiperLAN WLAN VSAT Radios Features Pout: + dbm Phase Noise: -0 dbc/hz @100
More informationFeatures. = +25 C, Vdd= +12V, Vgg2= +5V, Idd= 400 ma*
Typical Applications The HMC637LP5(E) wideband PA is ideal for: Features P1dB Output Power: +29 dbm Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Fiber Optics Functional
More informationFeatures. = +25 C, Vdd = +3V to +5V & Vctl = 0/Vdd (Unless Otherwise Stated)
Typical Applications Functional Diagram v1.7 The HMC288MS8 / HMC288MS8E is ideal for: Cellular PCS, ISM, MMDS WLL applications HMC288MS8 / 288MS8E 2 LSB GaAs MMIC 3-BIT DIGITAL ATTENUATOR,.7-3.7 GHz Features
More informationFeatures = +5V. = +25 C, Vdd 1. = Vdd 2
v1.11 HMC51LP3 / 51LP3E POWER AMPLIFIER, 5-1 GHz Typical Applications The HMC51LP3(E) is ideal for: Microwave Radio & VSAT Military & Space Test Equipment & Sensors Fiber Optics LO Driver for HMC Mixers
More informationFeatures. = +25 C, Vcc1 = Vcc2 = 5V, Zo = 75 Ohm [1]
HMC754SGE v.49 Typical Applications The HMC754SGE is ideal for: CATV / Broadband Infrastructure Test & Measurement Equipment Line Amps and Fiber Nodes Customer Premise Equipment Functional Diagram Output
More informationFeatures. Parameter Frequency (GHz) Min. Typ. Max. Units GHz GHz GHz. Attenuation Range GHz 15.
v.91.5 db LSB GaAs MMIC 5-BIT DIGITAL ATTENUATOR,.1-33 GHz Typical Applications The HMC941LP4 / HMC941LP4E is ideal for: Fiber Optics & Broadband Telecom Microwave Radio & VSAT Military Radios, Radar &
More informationFeatures OBSOLETE. = +25 C, With 0/+5V Control, 50 Ohm System
Typical Applications This switch is suitable for usage in 50- Ohm or 75-Ohm systems: Broadband Fiber Optics Switched Filter Banks Wireless below 8 GHz Functional Diagram Features Broadband Performance:
More informationHMC478SC70 / 478SC70E v
HMC47SC7 / 47SC7E v2.14 Typical Applications The HMC47SC7(E) is an ideal for: Cellular / PCS / 3G WiBro / WiMAX / 4G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment Functional
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v2.65 HMC455LP3 / 455LP3E Typical
More informationHMC600LP4 / 600LP4E POWER DETECTORS - SMT. 75 db LOGARITHMIC DETECTOR / CONTROLLER MHz. Features. Typical Applications. General Description
v.99 HMC6LP4 / 6LP4E 7 db LOGARITHMIC DETECTOR / CONTROLLER - 4 MHz Typical Applications The HMC6LP4 / HMC6LP4E is ideal for IF and RF applications in: Cellular/PCS/G WiMAX, WiBro & Fixed Wireless Power
More informationHMC454ST89 / 454ST89E
HMC44ST8 / 44ST8E Typical Applications The HMC44ST8 / HMC44ST8E is ideal for applications requiring a high dynamic range amplifi er: GSM, GPRS & EDGE CDMA & W-CDMA CATV/Cable Modem Fixed Wireless & WLL
More informationFeatures. = +25 C, Vcc = +5.0V. Vcc = +5V Parameter
Typical Applications Ideal as a Driver & Amplifier for: 2.2-2.7 GHz MMDS 3. GHz Wireless Local Loop - 6 GHz UNII & HiperLAN Functional Diagram Features P1dB Output Power: +14 dbm Output IP3: +27 dbm Gain:
More informationHMC274QS16 / 274QS16E. Features OBSOLETE. = +25 C, Vdd = +3V to +5V & Vctl = 0/Vdd. Parameter Frequency Min. Typical Max. Units
Typical Applications Functional Diagram v1. The HMC274QS16 / HMC274QS16E is ideal for: Cellular/PCS/3G Infrastructure 2.4 GHz ISM Radios Wireless Data HMC274QS16 / 274QS16E 1 LSB GaAs IC -BIT DIGITAL ATTENUATOR,.7-2.7
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.51 HMC7LP5E POWER AMPLIFIER,.2
More informationFeatures. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 80 ma [2]
Typical Applications This is ideal for: Features Low Noise Figure: 1.8 db Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation Functional Diagram High Gain: 19 db High
More informationParameter Frequency (GHz) Min. Typ. Max. Units DC GHz GHz GHz GHz Attenuation Range DC - 5.
5 Typical Applications HMC54LP3 / 54LP3E v.65 1 LSB GaAs MMIC 4-BIT DIGITAL Features The HMC54LP3 / HMC54LP3E is ideal for both RF and IF applications: Cellular Infrastructure ISM, MMDS, WLAN, WiMAX, WiBro
More informationOBSOLETE. Parameter Frequency (GHz) Min. Typ. Max. Units DC GHz GHz GHz Attenuation Range DC - 5.
5 Typical Applications HMC54LP3 / 54LP3E v.65 1 LSB GaAs MMIC 4-BIT DIGITAL Features The HMC54LP3 / HMC54LP3E is ideal for both RF and IF applications: Cellular Infrastructure ISM, MMDS, WLAN, WiMAX, WiBro
More informationFeatures OBSOLETE. = +25 C, With 0/+5V Control, 50 Ohm System. Parameter Frequency Min. Typ. Max. Units
v5.85 Typical Applications Features The HMC348LP3 / HMC348LP3E is ideal for: 75 Ohm Systems CATV Signal Distribution, Cable Modem Headend & DBS IF Switching 5 Ohm Systems Basestation Infrastructure & Test
More informationHMC580ST89 / 580ST89E. Features OBSOLETE. DC GHz GHz GHz. db db db Gain Variation Over Temperature DC GHz 0.
v.71 HMC5ST9 / 5ST9E Typical Applications The HMC5ST9 / HMC5ST9E is ideal forr: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment IF & RF Applications Functional
More informationFeatures. = +25 C, 50 Ohm System, Vcc= +3V
v.1 HMC32 / 32E Typical Applications Prescaler for DC to C Band PLL Applications: UNII, Point-to-Point & VSAT Radios 82.11a & HiperLAN WLAN Fiber Optic Cellular / 3G Infrastructure Functional Diagram Features
More informationFeatures. Output Power for 1 db Compression (P1dB) dbm Saturated Output Power (Psat) dbm
v1.314 Typical Applications Features The is ideal for: Test Instrumentation Microwave Radio & VSAT Telecom Infrastructure Military & Space Fiber optics Functional Diagram P1dB Output Power: +27 dbm Psat
More informationHMC602LP4 / 602LP4E POWER DETECTORS - SMT. 70 db, LOGARITHMIC DETECTOR / CONTROLLER, MHz
v3.9 HMC6LP / 6LPE 7 db, LOGARITHMIC DETECTOR / CONTROLLER, 1-8 MHz 1 Typical Applications The HMC6LP(E) is ideal for IF and RF applications in: Cellular/PCS/3G WiMAX, WiBro, WLAN, Fixed Wireless & Radar
More informationOBSOLETE HMC915LP4E. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram. General Description
v1.5 LO AMPLIFIER,.5-2.7 GHz Typical Applications The is ideal for: PCS / 3G Infrastructure Base Stations & Repeaters WiMAX & WiBro ISM & Fixed Wireless Functional Diagram Features Input IP3: +28 dbm Low
More informationFeatures. = +25 C, Vdd = +5 Vdc, 50 Ohm System. trise, tfall (10/90% RF) ton, toff (50% CTL to 10/90% RF)
Typical Applications The HMC174MS8 / HMC174MS8E is ideal for: ISM Applications PCMCIA Wireless Cards Portable Wireless Features Ultra Small Package: MSOP8 High Third Order Intercept: +60 m Single Positive
More informationHMC601LP4 / 601LP4E POWER DETECTORS - SMT. 75 db, FAST SETTLING, LOGARITHMIC DETECTOR / CONTROLLER MHz. Typical Applications.
v.9 HMC6LP4 / 6LP4E 7 db, FAST SETTLING, LOGARITHMIC DETECTOR / CONTROLLER - 4 MHz Typical Applications The HMC6LP4(E) is ideal for IF and RF applications in: Cellular/PCS/G WiMAX, WiBro & Fixed Wireless
More informationHMC457QS16G / 457QS16GE
v3.97 HMC47QS16G / 47QS16GE Typical Applications The HMC47QS16G / HMC47QS16GE is ideal for applications requiring a high dynamic range amplifi er: CDMA & W-CDMA GSM, GPRS & Edge Base Stations & Repeaters
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.41 Typical Applications The HMC649ALP6E
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK 5 Typical Applications The HMC472LP4(E)
More informationFeatures. Parameter* Min. Typ. Max. Units Frequency Range GHz Gain 2 5 db. Gain Variation over Temperature
v3.1 HMC59MSGE AMPLIFIER,. -.9 GHz Typical Applications The HMC59MSGE is ideal for: DTV Receivers Multi-Tuner Set Top Boxes PVRs & Home Gateways Functional Diagram Features Single-ended or Balanced Output
More informationHMC639ST89 / 639ST89E
v3.1 HMC63ST / 63STE AMPLIFIER,.2-4. GHz Typical Applications The HMC63ST(E) is ideal for: Cellular / PCS / 3G WiMAX, WiBro, & Fixed Wireless CATV & Cable Modem Microwave Radio IF and RF Sections Features
More informationHMC454ST89 / 454ST89E. Features. = +25 C, Vs= +5V [1]
Typical Applications The HMC44ST8 / HMC44ST8E is ideal for applications requiring a high dynamic range amplifi er: GSM, GPRS & EDGE CDMA & W-CDMA CATV/Cable Modem Fixed Wireless & WLL Features Output IP3:
More informationHMC599ST89 / 599ST89E. Features. The HMC599ST89(E) is ideal for: = +25 C MHz. Gain Variation Over Temperature MHz 0.
HMCST / STE Typical Applications v2.3 GaAs phemt MMIC LNA, Ohm - 1 MHz Features The HMCST(E) is ideal for: High P1 Output Power: +1 m VHF / UHF Antennas HDTV Receivers CMTS Equipment CATV, Cable Modem
More informationHMC612LP4 / 612LP4E v
HMC6LP4 / 6LP4E v.8 DETECTOR / CONTROLLER, 5 Hz - MHz Typical Applications Features The HMC6LP4(E) is ideal for IF and RF applications in: Cellular/PCS/G WiMAX, WiBro, WLAN, Fixed Wireless & Radar Power
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.613 Typical Applications The HMC545A
More informationFeatures. Parameter Min Typ. Max Min Typ. Max Min Typ Max Units Frequency Range GHz Gain
Typical Applications The is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios VSAT & SATCOM Marine Radar Military EW & ECM Functional Diagram Features High Saturated Output Power: dbm @ % PAE
More informationFeatures = +5V. = +25 C, Vdd 1. = Vdd 2
v7.11 HMC1LC3 POWER AMPLIFIER, - GHz Typical Applications The HMC1LC3 is ideal for use as a medium power amplifier for: Microwave Radio & VSAT Military & Space Test Equipment & Sensors Fiber Optics LO
More informationFeatures. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 70 ma
v2.61 Typical Applications This is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation Functional Diagram Features Low Noise Figure: 2.5 db Gain: 13 db P1dB
More informationFeatures. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 45 ma
v2.61 Typical Applications This is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation Functional Diagram Features Low Noise Figure: 2. db High Gain: 22 db
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC476SC7 / 476SC7E v4.814 Typical
More informationHMC596LP4 / HMC596LP4E
v1.49 HMC596LP4 / HMC596LP4E MATRIX,.2-3. GHz Typical Applications 4x2 Switch Matrix for.2-3. GHz Applications: DBS LNBs & Multiswitches Cable Modem / CATV Cellular Systems Functional Diagram Features
More informationFeatures. = +25 C, Vcc = +8V
v2.19 HMC5LP3 / 5LP3E Typical Applications The HMC5LP3(E) is ideal for: Wireless Infrastructure HPA & MCPA Error Correction Pre-Distortion or Feed-Forward Linearization PCS, GSM and W-CDMA Systems Beam
More informationOBSOLETE. = +25 C, With Vdd = +5V & Vctl = 0/+5V. Parameter Frequency Min. Typ. Max. Units DC - 4 GHz GHz Attenuation Range DC - 10 GHz 10 db
Typical Applications The HMC8LP3E is ideal for: Test Equipment and Sensors ISM, MMDS, WLAN, WiMAX, WiBro Microwave Radio & VSAT Cellular Infrastructure Functional Diagram HMC8LP3E v.11 1 GaAs MMIC 1-BIT
More informationFeatures. Gain: 14.5 db. Electrical Specifications [1] [2] = +25 C, Rbias = 825 Ohms for Vdd = 5V, Rbias = 5.76k Ohms for Vdd = 3V
Typical Applications The HMC77ALP3E is ideal for: Fixed Wireless and LTE/WiMAX/4G BTS & Infrastructure Repeaters and Femtocells Public Safety Radio Access Points Functional Diagram Features Noise Figure:.
More informationParameter Min. Typ. Max. Units
v4.112 Typical Applications The is ideal for: Point-to-Point and Point-to-Multi-Point Radio Military Radar, EW & ELINT Satellite Communications Functional Diagram Features General Description The is a
More informationHMC997LC4. Variable Gain Amplifier - SMT. VARIABLE GAIN AMPLIFIER GHz. Typical Applications. General Description. Functional Diagram
v2.14 Typical Applications The is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM Subsystems Ka-Band Radar Test Equipment Functional Diagram Features Wide Gain Control Range: 1 db Single
More informationHMC662LP3E POWER DETECTORS - SMT. 54 db, LOGARITHMIC DETECTOR, 8-30 GHz. Typical Applications. Features. Functional Diagram. General Description
Typical Applications The is ideal for: Point-to-Point Microwave Radio VSAT Wideband Power Monitoring Receiver Signal Strength Indication (RSSI) Test & Measurement Functional Diagram Features Wide Input
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.51 HMC32LC Typical Applications
More informationFeatures. = +25 C, With 0/+5V Control, 50 Ohm System
Typical Applications This switch is suitable for usage in 50- Ohm or 75-Ohm systems: Broadband Fiber Optics Switched Filter Banks Wireless below 8 GHz Features Broadband Performance: DC - 8 GHz High Isolation:
More information