HMC480ST89 / 480ST89E
|
|
- Brice Ball
- 5 years ago
- Views:
Transcription
1 v2.7 HMCST9 / ST9E Typical Applications The HMCST9 / HMCST9E is an ideal RF/IF gain block & LO or PA driver for: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment Functional Diagram Features P1 Output Power: +19 m to 2.5 GHz Gain: 1 2 GHz +3 m Output IP3 Single Supply: +V to +V Industry Standard SOT9 Package Included in the HMC-DK1 Designer s Kits General Description Electrical Specifications, Vs=. V, Rbias= 39 Ohm, T A = +25 C Gain The HMCST9 & HMCST9E are InGaP HBT Gain Block MMIC SMT amplifi ers covering DC to 5 GHz and packaged in an industry standard SOT9. The amplifi er can be used as a cascadable 5 Ohm RF/IF gain stage as well as a LO or PA driver with up to +2 m P1 output power for cellular/3g, FWA, CATV, microwave radio and test equipment applications. The HMCST9(E) offers 19 of gain with a +3 m output IP3 at 1 GHz while requiring only 2 ma from a single positive supply. The HMCST9(E) InGaP gain blocks offer excellent output IP3 and fl at +19 to +2m output power performance through 5 GHz compared to equivalent SiGe based products. Parameter Min. Typ. Max. Units DC - 1. GHz GHz GHz GHz GHz Gain Variation Over Temperature DC - 5 GHz.. / C Input Return Loss Output Return Loss DC - 1. GHz GHz DC - 1. GHz GHz Reverse Isolation DC - 5 GHz 2 Output Power for 1 Compression (P1) Output Third Order Intercept (IP3) (Pout= m per tone, 1 MHz spacing) Noise Figure.5-1. GHz GHz GHz GHz.5-1. GHz GHz GHz GHz DC - GHz GHz Supply Current (Icq) 2 ma Note: Data taken with broadband bias tee on device output m m m m m m m m - 2 For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, 2 Alpha and Road, to place Chelmsford, orders: Analog MA Devices, Inc., One Technology Way, P.O. Box 9, Norwood, MA -9 Phone: Fax: Phone: Order On-line at Application Support: Phone: Application or apps@hittite.com Support: Phone: 1--ANALOG-D
2 v2.7 HMCST9 / ST9E Broadband Gain & Return Loss RESPONSE () S21 S11 S Input Return Loss vs. Temperature INPUT RETURN LOSS () C Reverse Isolation vs. Temperature REVERSE ISOLATION () C Gain vs. Temperature GAIN () C Output Return Loss vs. Temperature OUTPUT RETURN LOSS () - +5 C Noise Figure vs. Temperature NOISE FIGURE () C For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, 2 Alpha and Road, to place Chelmsford, orders: Analog MA Devices, Inc., One Technology Way, P.O. Box 9, Norwood, MA -9 Phone: Fax: Phone: Order On-line at Application Support: Phone: Application or apps@hittite.com Support: Phone: 1--ANALOG-D - 3
3 v2.7 HMCST9 / ST9E P1 vs. Temperature P1 (m) C Output IP3 vs. Temperature OIP3 (m) C Icc (ma) Psat vs. Temperature Psat (m) Vcc vs. Icc Over Temperature for Fixed Vs= V, RBIAS= 39 Ohms +5 C C Gain, Power & OIP3 vs. Supply 5 MHz, Rbias= 39 Ohms GAIN (), P1 (m), Psat (m), OIP3 (m) Vcc (Vdc) Gain P1 Psat OIP3 7.. Vs (Vdc) - For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, 2 Alpha and Road, to place Chelmsford, orders: Analog MA Devices, Inc., One Technology Way, P.O. Box 9, Norwood, MA -9 Phone: Fax: Phone: Order On-line at Application Support: Phone: Application or apps@hittite.com Support: Phone: 1--ANALOG-D
4 v2.7 HMCST9 / ST9E Absolute Maximum Ratings Collector Bias Voltage (Vcc) Outline Drawing +. Vdc RF Input Power (RFIN)(Vcc = +5 Vdc) +11 m Junction Temperature 15 C Continuous Pdiss (T = 5 C) (derate.25 mw/ C above 5 C).53 W Thermal Resistance (junction to ground paddle) 2 C/W Storage Temperature to +15 C Operating Temperature - to +5 C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS NOTES: 1. PACKAGE BODY MATERIAL: MOLDING COMPOUND MP-S OR EQUIVALENT. 2. LEAD MATERIAL: Cu w/ Ag SPOT PLATING. 3. LEAD PLATING: % MATTE TIN.. DIMENSIONS ARE IN INCHES [MILLIMETERS] 5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF.15mm PER SIDE.. DIMENSION DOES NOT INCLUDE MOLDFLASH OF.25mm PER SIDE. 7. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating Package Marking [3] [1] H HMCST9 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 XXXX [2] H HMCST9E RoHS-compliant Low Stress Injection Molded Plastic % matte Sn MSL1 XXXX [1] Max peak refl ow temperature of 235 C [2] Max peak refl ow temperature of 2 C [3] -Digit lot number XXXX For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, 2 Alpha and Road, to place Chelmsford, orders: Analog MA Devices, Inc., One Technology Way, P.O. Box 9, Norwood, MA -9 Phone: Fax: Phone: Order On-line at Application Support: Phone: Application or apps@hittite.com Support: Phone: 1--ANALOG-D - 5
5 v2.7 HMCST9 / ST9E Pin Descriptions Pin Number Function Description Interface Schematic 1 RFIN Application Circuit Recommended Bias Resistor Values for Icc= 2 ma, Rbias= (Vs - Vcc) / Icc This pin is DC coupled. An off chip DC blocking capacitor is required. 3 RFOUT RF output and DC Bias (Vcc) for the output stage. 2, GND These pins and package bottom must be connected to RF/ DC ground. Supply Voltage (Vs) V V RBIAS VALUE Ω 39 Ω RBIAS POWER RATING 1/ W 1/ W Note: 1. External blocking capacitors are required on RFIN and RFOUT. 2. RBIAS provides DC bias stability over temperature. Recommended Component Values for Key Application Frequencies Frequency (MHz) Component L1 27 nh 5 nh 1 nh 1 nh 15 nh.2 nh. nh C1, C2.1 μf pf pf pf pf pf pf - For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, 2 Alpha and Road, to place Chelmsford, orders: Analog MA Devices, Inc., One Technology Way, P.O. Box 9, Norwood, MA -9 Phone: Fax: Phone: Order On-line at Application Support: Phone: Application or apps@hittite.com Support: Phone: 1--ANALOG-D
6 v2.7 HMCST9 / ST9E Evaluation PCB List of Materials for Evaluation PCB 371 [1] Item J1 - J2 J3 - J Description PCB Mount SMA Connector DC Pin C1, C2 Capacitor, 2 Pkg. C3 C C5 R1 L1 U1 PCB [2] pf Capacitor, 2 Pkg. pf Capacitor, 3 Pkg. 2.2 μf Capacitor, Tantalum Resistor, Pkg. Inductor, 3 Pkg. HMCST9 / HMCST9E 37 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 35 The circuit board used in the fi nal application should use RF circuit design techniques. Signal lines should have 5 Ohm impedance while the package ground leads and package bottom should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, 2 Alpha and Road, to place Chelmsford, orders: Analog MA Devices, Inc., One Technology Way, P.O. Box 9, Norwood, MA -9 Phone: Fax: Phone: Order On-line at Application Support: Phone: Application or apps@hittite.com Support: Phone: 1--ANALOG-D - 7
HMC589ST89 / 589ST89E. Features OBSOLETE. DC GHz GHz GHz. db Gain 22
v.71 HMC59ST9 / 59ST9E Typical Applications The HMC59ST9 / HMC59ST9E is ideal for: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment IF & RF Applications
More informationFeatures OBSOLETE. DC GHz GHz GHz GHz GHz
v2.71 HMC75ST9 / 75ST9E Typical Applications The HMC75ST9 / HMC75ST9E is an ideal RF/IF gain block & LO or PA driver: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio &
More informationHMC580ST89 / 580ST89E. Features OBSOLETE. DC GHz GHz GHz. db db db Gain Variation Over Temperature DC GHz 0.
v.71 HMC5ST9 / 5ST9E Typical Applications The HMC5ST9 / HMC5ST9E is ideal forr: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment IF & RF Applications Functional
More informationHMC471MS8G / 471MS8GE. Features OBSOLETE. DC GHz GHz GHz GHz GHz
v1.65 Typical Applications The HMC471MSG / HMC471MSGE is a dual RF/IF gain block & LO or PA driver: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment Functional
More informationFeatures. DC GHz GHz GHz DC GHz GHz GHz GHz DC - 4 GHz GHz Supply Current (Icq) ma
HMC311ST9 / 311ST9E v.17 MMIC AMPLIFIER, DC - GHz Typical Applications The HMC311ST9(E) is ideal for: Cellular / PCS / 3G Fixed Wireless & WLAN CATV & Cable Modem Microwave Radio Functional Diagram Features
More informationHMC639ST89 / 639ST89E
v3.1 HMC63ST / 63STE AMPLIFIER,.2-4. GHz Typical Applications The HMC63ST(E) is ideal for: Cellular / PCS / 3G WiMAX, WiBro, & Fixed Wireless CATV & Cable Modem Microwave Radio IF and RF Sections Features
More informationHMC478SC70 / 478SC70E v
HMC47SC7 / 47SC7E v2.14 Typical Applications The HMC47SC7(E) is an ideal for: Cellular / PCS / 3G WiBro / WiMAX / 4G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment Functional
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC476SC7 / 476SC7E v4.814 Typical
More informationHMC599ST89 / 599ST89E. Features. The HMC599ST89(E) is ideal for: = +25 C MHz. Gain Variation Over Temperature MHz 0.
HMCST / STE Typical Applications v2.3 GaAs phemt MMIC LNA, Ohm - 1 MHz Features The HMCST(E) is ideal for: High P1 Output Power: +1 m VHF / UHF Antennas HDTV Receivers CMTS Equipment CATV, Cable Modem
More informationHMC639ST89 / 639ST89E
Typical Applications The HMC39ST9(E) is ideal for: Cellular / PCS / 3G WiMAX, WiBro, & Fixed Wireless CATV & Cable Modem Microwave Radio IF and RF Sections Functional Diagram Electrical Specifications,
More informationHMC454ST89 / 454ST89E
HMC44ST8 / 44ST8E Typical Applications The HMC44ST8 / HMC44ST8E is ideal for applications requiring a high dynamic range amplifi er: GSM, GPRS & EDGE CDMA & W-CDMA CATV/Cable Modem Fixed Wireless & WLL
More informationHMC454ST89 / 454ST89E. Features. = +25 C, Vs= +5V [1]
Typical Applications The HMC44ST8 / HMC44ST8E is ideal for applications requiring a high dynamic range amplifi er: GSM, GPRS & EDGE CDMA & W-CDMA CATV/Cable Modem Fixed Wireless & WLL Features Output IP3:
More informationHMC454ST89 / 454ST89E
HMC44ST8 / 44ST8E Typical Applications The HMC44ST8 / HMC44ST8E is ideal for applications requiring a high dynamic range amplifi er: GSM, GPRS & EDGE CDMA & W-CDMA CATV/Cable Modem Fixed Wireless & WLL
More informationFeatures. = +25 C, Vcc1 = Vcc2 = 5V, Zo = 75 Ohm [1]
HMC754SGE v.49 Typical Applications The HMC754SGE is ideal for: CATV / Broadband Infrastructure Test & Measurement Equipment Line Amps and Fiber Nodes Customer Premise Equipment Functional Diagram Output
More informationHMC326MS8G / 326MS8GE
v9.511 AMPLIFIER, 3. - 4.5 GHz Typical Applications The HMC326MS8G / HMC326MS8GE is ideal for: Microwave Radios Broadband Radio Systems Wireless Local Loop Driver Amplifier Functional Diagram Features
More informationFeatures. = +25 C, Vdd= +3V. Parameter Min. Typ. Max. Units Frequency Range GHz Gain db
7 Typical Applications The HMC286 / HMC286E is ideal for: BlueTooth Home RF 82.11 WLAN Radios PCMCIA Platforms Functional Diagram v3.41 Features 2.4 GHz LNA Noise Figure: 1.7 db Gain: 19 db Single Supply:
More informationHMC457QS16G / 457QS16GE
v3.97 HMC47QS16G / 47QS16GE Typical Applications The HMC47QS16G / HMC47QS16GE is ideal for applications requiring a high dynamic range amplifi er: CDMA & W-CDMA GSM, GPRS & Edge Base Stations & Repeaters
More informationFeatures. = +25 C, Vcc = +5.0V. Vcc = +5V Parameter
Typical Applications Ideal as a Driver & Amplifier for: 2.2-2.7 GHz MMDS 3. GHz Wireless Local Loop - 6 GHz UNII & HiperLAN Functional Diagram Features P1dB Output Power: +14 dbm Output IP3: +27 dbm Gain:
More informationFeatures OBSOLETE. Saturated Output Power (Psat) dbm Output Third Order Intercept (IP3) dbm Supply Current (Idd) ma
7 Typical Applications The HMC667LP2(E) is ideal for: WiMAX, WiBro & Fixed Wireless SDARS & WLAN Receivers Infrastructure & Repeaters Access Points Telematics & DMB Functional Diagram v2.11 Electrical
More informationFeatures OBSOLETE. = +25 C, as a function of Vdd. Vdd = +3V Vdd = +5V Vdd = +5V Vdd = +5V Parameter
v5.117 HMC3 / 3E GENERAL PURPOSE 1 mw GaAs MMIC AMPLIFIER,. - 3. GHz Typical Applications Broadband or Narrow Band Applications: Cellular/PCS/3G Fixed Wireless & Telematics Cable Modem Termination Systems
More informationFeatures
HMC37SC7E v1.1.3-3. GHz Typical Applications The HMC37SC7E is ideal for: Cellular/PCS/3G WCS, mmds & ism Fixed Wireless & WLAN Private Land Mobile Radio Functional Diagram Features Single Supply: Vdd =
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v2.65 HMC455LP3 / 455LP3E Typical
More informationHMC486LP5 / 486LP5E LINEAR & POWER AMPLIFIERS - SMT. SURFACE MOUNT PHEMT 2 WATT POWER AMPLIFIER, 7-9 GHz. Typical Applications.
v2. Typical Applications The HMC486LP5(E) is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment and Sensors Military End-Use Features Saturated Power: +33 dbm @ 2% PAE Output IP3:
More informationTEL: FAX: v.117 HMC3 / 3E GENERAL PURPOSE 1 mw GaAs MMIC AMPLIFIER, GHz Broadband Gain & Return Vdd =
TEL:7-339622 FAX:7-337612 E-MAIL: szss@3.com v.117 HMC3 / 3E GENERAL PURPOSE 1 mw GaAs MMIC AMPLIFIER,. - 3. GHz Typical Applications Broadband or Narrow Band Applications: Cellular/PCS/3G Fixed Wireless
More informationFeatures. = +25 C, Vcc = 5V, Vpd = 5V. Parameter Min. Typ. Max. Min. Typ. Max. Units
v2.717 MMIC AMPLIFIER, 4 - GHz Typical Applications The is ideal for: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment IF & RF Applications Functional
More informationFeatures. = +25 C, 50 Ohm System, Vcc= +3V
v.1 HMC32 / 32E Typical Applications Prescaler for DC to C Band PLL Applications: UNII, Point-to-Point & VSAT Radios 82.11a & HiperLAN WLAN Fiber Optic Cellular / 3G Infrastructure Functional Diagram Features
More informationFeatures. = +25 C, Vdd = +5V, Rbias = 10 Ohms*
Typical Applications Functional Diagram The HMC36LP3 / HMC36LP3E is ideal for: Cellular/3G Infrastructure Base Stations & Repeaters CDMA, W-CDMA, & TD-SCDMA Private Land Mobile Radio GSM/GPRS & EDGE UHF
More informationFeatures OBSOLETE. = +25 C, Rbias = 0 Ohm. Bypass Mode Failsafe Mode Parameter
7 Typical Applications The HMC668LP3(E) is ideal for: Cellular/3G and LTE/WiMAX/4G BTS & Infrastructure Repeaters and Femtocells Tower Mounted Amplifiers Test & Measurement Equipment Functional Diagram
More informationFeatures. = +25 C, Vcc= 5V
v4.21 Typical Applications Active Multiplier for X Band Applications: Fiber Optic Point-to-Point Radios Military Radar Functional Diagram Features Output Power: +4 dbm Sub-Harmonic Suppression: >2 dbc
More informationHMC694LP4 / 694LP4E. Variable gain amplifiers - ANALOG - smt. GaAs MMIC ANALOG VARIABLE GAIN AMPLIFIER, 6-17 GHz. Typical Applications
v2.1 Typical Applications The HMC694LP4(E) is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM X-Band Radar Test Equipment Features Wide Gain Control Range: 23 db Single Control Voltage
More informationHMC618ALP3E AMPLIFIERS - LOW NOISE - SMT. GaAs SMT phemt LOW NOISE AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram
7 Typical Applications The is ideal for: Cellular/3G and LTE/WiMAX/4G BTS & Infrastructure Repeaters and Femto Cells Public Safety Radios Functional Diagram v. Electrical Specifications T A = + C, Rbias
More informationOBSOLETE HMC915LP4E. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram. General Description
v1.5 LO AMPLIFIER,.5-2.7 GHz Typical Applications The is ideal for: PCS / 3G Infrastructure Base Stations & Repeaters WiMAX & WiBro ISM & Fixed Wireless Functional Diagram Features Input IP3: +28 dbm Low
More informationFeatures. = +25 C, Vs = +5V. Parameter Min. Typ. Max. Min. Typ. Max. Units Frequency Range MHz Gain
Typical Applications Functional Diagram The HMC32LP3 / HMC32LP3E is ideal for basestation receivers: GSM, GPRS & EDGE CDMA & W-CDMA Private Land Mobile Radio HMC32LP3 / 32LP3E AMPLIFIER, 00-1000 MHz Features
More informationHMC320MS8G / 320MS8GE. Features OBSOLETE. = +25 C, Vdd = +3V
Typical Applications The HMCMSG(E) is ideal for: UNII HiperLAN Functional Diagram v. Electrical Specifications, T A = + C, Vdd = +V HMCMSG / MSGE Features General Description Selectable Functionality:
More informationHMC1040LP3CE. Amplifiers - Low Noise - smt. GaAs phemt MMIC LOW NOISE AMPLIFIER, GHz. Features. Typical Applications. General Description
v.112 HMC14LP3CE AMPLIFIER, 24-43. GHz Typical Applications This HMC14LP3BE is ideal for: Point-to-Point Radios Test Instrumentation SatCom Transponders & VSAT Industrial Sensors EW & ECM Subsystems Functional
More informationFeatures OBSOLETE. = +25 C, 50 Ohm System, Vcc= 3V
Typical Applications Prescaler for DC to 4. GHz PLL Applications: DBS/CATV Tuners 82.11x & HiperLAN WLAN Fixed Wireless & WLL Microwave & VSAT Radios Cellular & 3G Functional Diagram v.93 HMC42MS8 / 42MS8E
More informationFeatures. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 80 ma [2]
Typical Applications This is ideal for: Features Low Noise Figure: 1.8 db Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation Functional Diagram High Gain: 19 db High
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.51 HMC32LC Typical Applications
More informationFeatures. = +25 C, Vs = +5V, Vpd = +5V, Vbias=+5V
v4.1217 HMC49LP4E Typical Applications This amplifier is ideal for use as a power amplifier for 3.3-3.8 GHz applications: WiMAX 82.16 Fixed Wireless Access Wireless Local Loop Functional Diagram Features
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v3.38 POWER AMPLIFIER, 2-2 GHz Typical
More informationFeatures. Output Power for 1 db Compression (P1dB) dbm Saturated Output Power (Psat) dbm
v1.314 Typical Applications Features The is ideal for: Test Instrumentation Microwave Radio & VSAT Telecom Infrastructure Military & Space Fiber optics Functional Diagram P1dB Output Power: +27 dbm Psat
More informationGain Control Range db
v1.112-12 GHz Typical Applications The is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM Subsystems X-Band Radar Test Equipment & Sensors Functional Diagram Features Wide Gain Control
More informationFeatures. = +25 C, Vcc =5V, Vpd = 5V. Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max Units
v2.917 Typical Applications Features The is ideal for: Point-to-Point Radios Point-to-Multipoint Radios VSAT LO Driver for HMC Mixers Military EW & ECM Functional Diagram High Output IP3: +28 dbm Single
More informationFeatures. = +25 C, Vdd = +5V, Idd = 400mA [1]
v.61 Typical Applications The is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios VSAT Military & Space Features Saturated Output Power:.5 dbm @ 21% PAE High Output IP3: 34.5 dbm High Gain:.5
More informationFeatures. Parameter Frequency Min. Typ. Max. Units Insertion Loss DC GHz db. DC GHz
v1.11 HMC55 / 55E Typical Applications The HMC55 / HMC55E is ideal for: RFID & Electronic Toll Collection (etc) Tags, Handsets & Portables ISM, WLAN, WiMAX & WiBro Automotive Telematics Test Equipment
More informationFeatures. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 70 ma
v2.61 Typical Applications This is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation Functional Diagram Features Low Noise Figure: 2.5 db Gain: 13 db P1dB
More informationOBSOLETE. = +25 C, Vdd = Vs= +5V, Vctl= 0/ +5V. Parameter Frequency Min. Typ. Max. Units DC GHz 37. db Gain (Maximum Gain State)
v.1212.5 db LSB GaAs MMIC 6-BIT DIGITAL Typical Applications The is ideal for: IF & RF Applications Cellular/3G Infrastructure WiBro / WiMAX / 4G Microwave Radio & VSAT Test Equipment and Sensors Functional
More informationFeatures. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 45 ma
v2.61 Typical Applications This is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation Functional Diagram Features Low Noise Figure: 2. db High Gain: 22 db
More informationHMC310MS8G / 310MS8GE. Features OBSOLETE. = +25 C, Vdd = +3V
Typical Applications Transmit & Receive Switch for 2. GHz Applications: Bluetooth HomeRF WLAN Radios Functional Diagram v3.67 Electrical Specifications, T A = +25 C, Vdd = +3V HMC31MSG / 31MSGE Features
More informationFeatures. = +25 C, Vcc = +8V
v2.19 HMC5LP3 / 5LP3E Typical Applications The HMC5LP3(E) is ideal for: Wireless Infrastructure HPA & MCPA Error Correction Pre-Distortion or Feed-Forward Linearization PCS, GSM and W-CDMA Systems Beam
More informationFeatures OBSOLETE. Parameter Min. Typ. Max. Units. Frequency Range GHz Insertion Loss 5 7 db. Input Return Loss 16 db
v1.611 Typical Applications The is ideal for: EW Receivers Weather & Military Radar Satellite Communications Beamforming Modules Phase Cancellation Functional Diagram Features Low RMS Phase Error: 1.2
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK Typical Applications Transmit & Receive
More informationFeatures OBSOLETE. = +25 C, 50 Ohm System GHz degrees Insertion Loss 6-15 GHz 8 11 db. Return Loss (Input and Output) 6-15 GHz 7 db
v2.29 6 ANALOG PHASE SHIFTER, 1 Typical Applications The HMC538LP4 / HMC538LP4E is ideal for: Fiber Optics Military Test Equipment Functional Diagram Features Electrical Specifications, T A = +25 C, 5
More informationParameter Min. Typ. Max. Units Frequency Range GHz
v.312 27-31. GHz Typical Applications The is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM Subsystems Ka-Band Radar & VSAT Test Equipment Functional Diagram Features Wide Gain Control
More informationHMC437MS8G / 437MS8GE
v5.1211 HMC37MS8G / 37MS8GE Typical Applications Prescaler for DC to C Band PLL Applications: UNII, Point-to-Point & VSAT Radios 82.11a & HiperLAN WLAN Fiber Optic Cellular / 3G Infrastructure Functional
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v1.14 AMPLIFIER, 18-4 GHz Typical
More informationFeatures. = +25 C, Vdd = +7V, Idd = 1340 ma [1]
Typical Applications The HMC591LP5 / HMC591LP5E is ideal for use as a power amplifi er for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment & Sensors Military End-Use Space Features Saturated
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.51 HMC7LP5E POWER AMPLIFIER,.2
More informationHMC948LP3E POWER DETECTORS - SMT. 54 db, LOGARITHMIC DETECTOR, 1-23 GHz. Typical Applications. Features. Functional Diagram. General Description
v.9 HMC948LPE DETECTOR, - GHz Typical Applications The HMC948LPE is ideal for: Point-to-Point Microwave Radio VSAT Wideband Power Monitoring Receiver Signal Strength Indication (RSSI) Test & Measurement
More informationFeatures. Parameter Frequency Min. Typ. Max. Units Insertion Loss DC GHz db
v.1212 HMC55A / 55AE Typical Applications The HMC55A / HMC55AE is ideal for: RFID & Electronic Toll Collection (ETC) Tags, Handsets & Portables ISM, WLAN, WiMAX & WiBro Automotive Telematics Test Equipment
More informationHMC997LC4. Variable Gain Amplifier - SMT. VARIABLE GAIN AMPLIFIER GHz. Typical Applications. General Description. Functional Diagram
v2.14 Typical Applications The is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM Subsystems Ka-Band Radar Test Equipment Functional Diagram Features Wide Gain Control Range: 1 db Single
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com HMC461* Product Page Quick Links Last Content Update: 8/3/216 Comparable
More informationSURFACE MOUNT PHEMT 2 WATT POWER AMPLIFIER,
v2.617 AMPLIFIER, - 12 GHz Typical Applications The is ideal for use as a power amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment and Sensors Military End-Use Features Saturated
More informationOBSOLETE. Parameter Frequency (GHz) Min. Typ. Max. Units DC GHz GHz. Attenuation Range DC - 3 GHz 31 db
5 Typical Applications The HMC47LP3(E) is ideal for: Cellular; UMTS/3G Infrastructure ISM, MMDS, WLAN, WiMAX Microwave Radio & VSAT Test Equipment and Sensors Functional Diagram HMC47LP3 / 47LP3E v4.118
More informationFeatures. = +25 C, Vcc(RF), Vcc(DIG) = +5V
& DIVIDE-BY-16, 23. - 26. GHz Typical Applications The HMC739LP4(E) is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios / LMDS VSAT Features Pout: + dbm Phase Noise: -93 dbc/hz @ 100 khz Typ.
More informationFeatures. = +25 C, Vdd = +5V, 5 dbm Drive Level
v1.4 Typical Applications The HMC561LP3E are suitable for: Clock Generation Applications: SONET OC-192 & SDH STM-64 Point-to-Point & VSAT Radios Test Instrumentation Military & Space Functional Diagram
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v3.1211 45 Analog Phase Shifter,
More informationFeatures = +5V. = +25 C, Vdd 1. = Vdd 2
v1.11 HMC51LP3 / 51LP3E POWER AMPLIFIER, 5-1 GHz Typical Applications The HMC51LP3(E) is ideal for: Microwave Radio & VSAT Military & Space Test Equipment & Sensors Fiber Optics LO Driver for HMC Mixers
More informationFeatures OBSOLETE. Isolation DC GHz db
Typical Applications Features - 224 The is ideal for: Cellular / 4G Infrastructure WiMAX, WiBro & Fixed Wireless Automotive Telematics Mobile Radio Test Equipment Functional Diagram Input P1dB: + @ Vdd
More informationFeatures OBSOLETE. = +25 C, 50 Ohm system, Vdd = +5V. Parameter Frequency Min. Typ. Max. Units GHz
Typical Applications v.91 ATTENUATOR,.5-6. GHz Features The is ideal for: Point-to-Point Radio Cellular/3G & WiMAX/4G Infrastructure Test Instrumentation Microwave Sensors Military, ECM & Radar Functional
More informationHMC245QS16 / 245QS16E. Features OBSOLETE. Parameter Frequency Min. Typ. Max. Units. DC GHz DC GHz DC GHz
Typical Applications The HMC245QS16 / HMC245QS16E is ideal for: Basestation Infrastructure CATV / DBS Wireless Local Loop Test Equipment Functional Diagram Features Low Insertion Loss:.5 @ 2. GHz Non-Refl
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.613 Typical Applications The HMC545A
More informationHMC368LP4 / 368LP4E FREQ. MULTIPLIERS - ACTIVE - SMT. SMT GaAs PHEMT MMIC AMP-DOUBLER-AMP, 9-16 GHz OUTPUT. Typical Applications.
v3.5 Typical Applications Microwave Radios & VSAT Fiber Optic Infrastructure Military Communications & Radar Functional Diagram Features Output Power: +15 dbm Wide Input Power Range: to +1 dbm 1 khz SSB
More informationHMC307QS16G / 307QS16GE. Features OBSOLETE. = +25 C, Vee = -5V & VCTL= 0/Vee. Parameter Frequency Min. Typical Max. Units DC - 1.
5 Typical Applications v8.98 HMC37QS16G / 37QS16GE 1 LSB GaAs MMIC 5-BIT DIGITAL Features The HMC37QS16G(E) is ideal for: Cellular PCS, ISM, MMDS Wireless Local Loop Functional Diagram 1 LSB Steps to 31
More informationHMC695LP4 / HMC695LP4E
v.1 Typical Applications The HMC95LP(E) is ideal for: Fiber Optic Applications Point-to-Point Radios Military Radar Functional Diagram Features Output Power: +7 dbm Sub-Harmonic Suppression: >5 dbc SSB
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK 5 Typical Applications The HMC472LP4(E)
More informationFeatures. = +25 C, Vss= -5V, Vdd= +5V, Control Voltage= 0/ +5V, 50 Ohm System. Frequency Range GHz Insertion Loss* 4 6.
v1.28 HMC647LP6 / 647LP6E Typical Applications The HMC647LP6(E) is ideal for: EW Receivers Weather & Military Radar Satellite Communications Beamforming Modules Phase Cancellation Functional Diagram Features
More informationFeatures OBSOLETE. = +25 C, Vctl = 0/+8 Vdc, 50 Ohm System. Parameter Frequency* Min. Typ. Max. Units Tx - RFC MHz db.
GaAs MMIC 1W T/R Typical Applications Features 1 The HMC446 / HMC446E is ideal for: ISM/Cellular Portables/Handsets Automotive Telematic Applications Mobile Radio Functional Diagram Low Insertion Loss:.6
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v2.49 Typical Applications The HMC536LP2(E)
More informationFeatures OBSOLETE. = +25 C, Vdd = +3.3 Vdc, 50 Ohm System
Typical Applications v1.1 ATTENUATOR,.4-2.2 GHz Features The HMC473MS8 / HMC473MS8E is ideal for: Cellular, UMTS/3G Infrastructure Portable Wireless GPS Functional Diagram RoHS Compliant Product Single
More informationFeatures. = +25 C, Vcc = +3V
Typical Applications Low noise MMIC VCO w/buffer Amplifi er for: VSAT & Microwave Radio Test Equipment & Industrial Controls Military Features Pout: +dbm Phase Noise: -106 dbc/hz @100 khz No External Resonator
More informationFeatures. = +25 C, Vdd= 5V. Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz
Typical Applications The HMC62LP / HMC62LPE Wideband LNA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military EW, ECM & C 3 I Test Instrumentation Fiber Optics Functional Diagram Features
More informationParameter Min. Typ. Max. Units
v4.112 Typical Applications The is ideal for: Point-to-Point and Point-to-Multi-Point Radio Military Radar, EW & ELINT Satellite Communications Functional Diagram Features General Description The is a
More informationFeatures. = +25 C, Vdd= 8V, Idd= 75 ma*
HMC46LC5 Typical Applications v3.11 AMPLIFIER, DC - 2 GHz Features The HMC46LC5 is ideal for: Noise Figure: 2.5 db @ 1 GHz Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation
More informationHMC1013LP4E. SDLVAs - SMT. SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA), GHz
v.9 HMCLPE AMPLIFIER (SDLVA),.5-8.5 GHz Typical Applications The HMCLPE is ideal for: EW, ELINT & IFM Receivers DF Radar Systems ECM Systems Broadband Test & Measurement Power Measurement & Control Circuits
More informationFeatures OBSOLETE. = +25 C, Vcc= 5V [1]
v.41 Typical Applications The is Ideal for: Microwave Radio & VSAT Military Radios, Radar & ECM Test Instrumentation Functional Diagram Electrical Specifications, T A = + C, Vcc= V [1] Features Output
More informationFeatures = +5V. = +25 C, Vdd 1. = Vdd 2
v7.11 HMC1LC3 POWER AMPLIFIER, - GHz Typical Applications The HMC1LC3 is ideal for use as a medium power amplifier for: Microwave Radio & VSAT Military & Space Test Equipment & Sensors Fiber Optics LO
More informationFeatures. Parameter* Min. Typ. Max. Units Frequency Range GHz Gain 2 5 db. Gain Variation over Temperature
v3.1 HMC59MSGE AMPLIFIER,. -.9 GHz Typical Applications The HMC59MSGE is ideal for: DTV Receivers Multi-Tuner Set Top Boxes PVRs & Home Gateways Functional Diagram Features Single-ended or Balanced Output
More informationFeatures. Parameter Frequency (GHz) Min. Typ. Max. Units GHz GHz GHz. Attenuation Range GHz 15.
v.91.5 db LSB GaAs MMIC 5-BIT DIGITAL ATTENUATOR,.1-33 GHz Typical Applications The HMC941LP4 / HMC941LP4E is ideal for: Fiber Optics & Broadband Telecom Microwave Radio & VSAT Military Radios, Radar &
More informationFeatures db
v1.19 DETECTOR / CONTROLLER, 5-8 MHz Power Detectors - SMT Typical Applications The is ideal for: Cellular Infrastructure WiMAX, WiBro & LTE/G Power Monitoring & Control Circuitry Receiver Signal Strength
More informationFeatures. OUT Intercept dbm Variation of OUT with Temperature from -40 C to dbm Input
v.1 DETECTOR / CONTROLLER, 5-7 MHz Typical Applications The HMC713MS8(E) is ideal for: Cellular Infrastructure WiMAX, WiBro & LTE/G Power Monitoring & Control Circuitry Receiver Signal Strength Indication
More informationFeatures. = +25 C, Vdd = +5 Vdc, 50 Ohm System
v4.19 Typical Applications The HMC174MS8(E) is ideal for: Infrastructure & Repeaters Cellular/3G & WiMAX Portable Wireless LNA Protection Automotive Telematics Test Equipment Features Low Insertion Loss:.5
More informationFeatures. = +25 C, 50 Ohm system
v6.312 Typical Applications Features The E is ideal for: Point-to-Point Radio VSAT Radio Test Instrumentation Microwave Sensors Military, ECM & Radar Functional Diagram Wide Bandwidth: 5-26.5 GHz Excellent
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.41 Typical Applications The HMC649ALP6E
More informationFeatures. = +25 C, Vdd= +12V, Vgg2= +5V, Idd= 400 ma*
Typical Applications The HMC637LP5(E) wideband PA is ideal for: Features P1dB Output Power: +29 dbm Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Fiber Optics Functional
More informationHMC659LC5 LINEAR & POWER AMPLIFIERS - SMT. GaAs PHEMT MMIC POWER AMPLIFIER, DC - 15 GHz. Features. Typical Applications. General Description
v.61 Typical Applications The wideband PA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Fiber Optics Functional Diagram Features P1dB Output Power: +27.5
More informationAnalog Devices Welcomes Hittite Microwave Corporation
Analog Devices Welcomes Hittite Microwave Corporation www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.915 GaAs MMIC 6-BIT DIGITAL Typical Applications The HMC648ALP6E is ideal for:
More informationOBSOLETE HMC5846LS6 AMPLIFIERS - LINEAR & POWER - SMT. Electrical Specifications, T A. Features. Typical Applications. General Description
v1.414 Typical Applications The HMC846LS6 is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios VSAT & SATCOM Military & Space Functional Diagram Electrical Specifications, T A = +2 C Vdd = Vdd1,
More informationFeatures. Gain: 17 db. OIP3: 25 dbm. = +25 C, Vdd 1, 2 = +3V
v.7 HMCLC Typical Applications The HMCLC is ideal for use as a LNA or driver amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment and Sensors Military & Space Functional
More informationFeatures OBSOLETE. = +25 C, With 0/+5V Control, 50 Ohm System. Parameter Frequency Min. Typ. Max. Units
v5.85 Typical Applications Features The HMC348LP3 / HMC348LP3E is ideal for: 75 Ohm Systems CATV Signal Distribution, Cable Modem Headend & DBS IF Switching 5 Ohm Systems Basestation Infrastructure & Test
More information