HMC454ST89 / 454ST89E

Size: px
Start display at page:

Download "HMC454ST89 / 454ST89E"

Transcription

1 HMC44ST8 / 44ST8E Typical Applications The HMC44ST8 / HMC44ST8E is ideal for applications requiring a high dynamic range amplifi er: GSM, GPRS & EDGE CDMA & W-CDMA CATV/Cable Modem Fixed Wireless & WLL Features Output IP3: +4 to +42 dbm Gain: MHz % +28 dbm Pout +17. dbm W-CDMA Channel Power@ -4 dbc ACP Single +V Supply Industry Standard SOT8 Package Included in the HMC-DK2 Designer s Kit Functional Diagram Electrical Specifications, T A = + C, Vs= +V [1] General Description The HMC44ST8 & HMC44ST8E are high dynamic range GaAs InGaP Heterojunction Bipolar Transistor (HBT) ½ watt MMIC amplifi ers operating between.4 and 2. GHz. Packaged in a low cost industry standard SOT8, the amplifi er gain is typically 17.8 db from.8 to 1. GHz and 12. db from 1.8 to 2.2 GHz. Utilizing a minimum number of external components and a single +V supply, the amplifi er output IP3 can be optimized to +4 dbm at. GHz or +42 dbm at 2. GHz. The high output IP3 and PAE makes the HMC44ST8 an ideal driver amplifi er for Cellular/PCS/3G, WLL, ISM and Fixed Wireless applications. Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units Frequency Range MHz Gain db Gain Variation Over Temperature db / C Input Return Loss 7 12 db Output Return Loss db Output Power for 1dB Compression (P1dB) dbm Saturated Output Power (Psat) dbm Output Third Order Intercept (IP3) [2] dbm Noise Figure db Supply Current (Icq) ma [1] Specifi cations and data refl ect HMC44ST8 measured using the respective application circuits for each designated frequency band found herein. Contact the HMC Applications Group for assistance in optimizing performance for your application. [2] Two-tone input power of dbm per tone, 1 MHz spacing. - 1 One Technology Way, P.O. Box 16, Norwood, MA Phone: Fax: Phone: Order On-line at Application Support: Phone: Application or apps@hittite.com

2 HMC44ST8 / 44ST8E Broadband Gain & Return MHz RESPONSE (db) S21 S11 S Input Return Loss vs. MHz RETURN LOSS (db) P1dB vs. MHz P1dB (dbm) Gain vs. MHz GAIN (db) Output Return Loss vs. MHz RETURN LOSS (db) Psat vs. MHz PSAT (dbm) One Technology Way, P.O. Box 16, Norwood, MA Phone: Fax: Phone: Order On-line at Application Support: Phone: Application or apps@hittite.com - 11

3 HMC44ST8 / 44ST8E Output IP3 vs. MHz IP3 (dbm) Reverse Isolation vs. MHz ISOLATION (db) ACPR (dbc) ACPR vs. Supply 88 MHz CDMA IS, Channels Forward CDMA IS Frequency : 88 MHz Integration BW: MHz Forward Link, Channels Noise Figure vs. MHz NOISE FIGURE (db) Gain, Power & Output IP3 vs. Supply MHz GAIN (db), P1dB (dbm), PSAT (dbm), IP3 (dbm) GAIN P1dB PSAT IP Vs (V) 4.V.V.V -7 Source ACPR Channel Output Power (dbm) - 12 One Technology Way, P.O. Box 16, Norwood, MA Phone: Fax: Phone: Order On-line at Application Support: Phone: Application or apps@hittite.com

4 HMC44ST8 / 44ST8E Broadband Gain & Return 16 MHz RESPONSE (db) S21 S11 S Input Return Loss vs. 16 MHz RETURN LOSS (db) P1dB vs. 16 MHz P1dB (dbm) Gain vs. 16 MHz GAIN (db) Output Return Loss vs. 16 MHz RETURN LOSS (db) Psat vs. 16 MHz PSAT (dbm) One Technology Way, P.O. Box 16, Norwood, MA Phone: Fax: Phone: Order On-line at Application Support: Phone: Application or apps@hittite.com - 13

5 Output IP3 vs. 16 MHz IP3 (dbm) Reverse Isolation vs. 16 MHz ISOLATION (db) ACPR vs. Supply 1.6 GHz CDMA 2, Channels Forward ACPR (dbc) CDMA2 Rev. 8 Frequency : 1.6 GHz Integration BW: MHz Forward Link, SRI, CHANNELS 4.V.V.V -8 Source ACPR Channel Output Power (dbm) v.71 HMC44ST8 / 44ST8E Noise Figure vs. 16 MHz NOISE FIGURE (db) Gain, Power & Output IP3 vs. Supply 16 MHz GAIN (db), P1dB (dbm), PSAT (dbm), IP3 (dbm) GAIN P1dB PSAT IP Vs (V) ACPR vs. Supply 2.14 GHz W-CDMA, 64 DPCH ACPR (dbc) WCDMA Frequency : 2.14 GHz Integration BW: 3.84 MHz 64 DPCH 4.V.V -6 Source ACPR Channel Output Power (dbm).v - 14 One Technology Way, P.O. Box 16, Norwood, MA Phone: Fax: Phone: Order On-line at Application Support: Phone: Application or apps@hittite.com

6 HMC44ST8 / 44ST8E Absolute Maximum Ratings Collector Bias Voltage (Vcc) +6. Vdc RF Input Power (RFIN)(Vs = +Vdc) + dbm Junction Temperature 1 C Continuous Pdiss (T = 8 C) (derate 13.6 mw/ C above 8 C).8 W Thermal Resistance (junction to ground paddle) 73 C/W Storage Temperature -6 to +1 C Operating Temperature -4 to +8 C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF.1mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF.mm PER SIDE.. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating Package Marking [3] [1] H44 HMC44ST8 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 XXXX [2] H44 HMC44ST8E RoHS-compliant Low Stress Injection Molded Plastic 1% matte Sn MSL1 XXXX [1] Max peak refl ow temperature of 23 C [2] Max peak refl ow temperature of 26 C [3] 4-Digit lot number XXXX One Technology Way, P.O. Box 16, Norwood, MA Phone: Fax: Phone: Order On-line at Application Support: Phone: Application or apps@hittite.com - 1

7 HMC44ST8 / 44ST8E Pin Descriptions Pin Number Function Description Interface Schematic 1 RFIN 3 RFOUT This pin is AC coupled. Off chip matching components are required. See Application Circuit herein. RF output and DC Bias input for the output amplifier stage. Off chip matching components are required. See Application Circuit herein. 2,4 GND These pins & package bottom must be connected to RF/DC ground. MHz Application Circuit, Compact Layout This circuit was used to specify the performance for 84-6 MHz operation. This circuit will satisfy many applications from 7 to 12 MHz. Contact the HMC Applications Group for assistance in optimizing performance for your application. TL1 Impedance Ohm Physical Length. Electrical Length 2. PCB Material: 1 mil Rogers 43, Er = 3.48 Recommended Component Values L1, L2 1 nh L3 36 nh R1.1 Ohms C1 8 pf C2 22 pf C3 2.7 pf C4, C6 1 pf C 2.2 μf - 16 One Technology Way, P.O. Box 16, Norwood, MA Phone: Fax: Phone: Order On-line at Application Support: Phone: Application or apps@hittite.com

8 HMC44ST8 / 44ST8E MHz Evaluation PCB List of Materials for Evaluation PCB 177 [1] Item J1 - J2 J3 -J4 C1 C2 C3 Description PCB Mount SMA Connector DC Pins 8 pf Capacitor, 42 Pkg. 22 pf Capacitor, 42 Pkg. 2.7 pf Capacitor, 42 Pkg. C4, C6 1 pf Capacitor, 42 Pkg. C 2.2 μf Capacitor, Tantalum L1, L2 1 nh Inductor, 42 Pkg. L3 R1 U1 PCB [2] 36 nh Inductor, 42 Pkg..1 Ohms HMC44ST8 / HMC44ST8E Linear Amp 1773 Evaluation PCB, 1 mils [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 43, Er = 3.48 The circuit board used in this application should use RF circuit design techniques. Signal lines should have Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. One Technology Way, P.O. Box 16, Norwood, MA Phone: Fax: Phone: Order On-line at Application Support: Phone: Application or apps@hittite.com - 17

9 HMC44ST8 / 44ST8E 16 & 214 MHz Application Circuit This circuit was used to specify the performance for 18-2 and 2-22 MHz operation. This circuit will satisfy many applications from 17 to MHz. Contact the HMC Applications Group for assistance in optimizing performance for your application. TL1 TL2 T3 TL4 Impedance Ohm Ohm Ohm Ohm Physical Length Electrical Length PCB Material: 1 mil Rogers 43, Er = 3.48 Recommended Component Values L1 8.2 nh C1 1 pf C2 1.2 pf C3 3 pf C4 1 pf C 2.2 μf - 18 One Technology Way, P.O. Box 16, Norwood, MA Phone: Fax: Phone: Order On-line at Application Support: Phone: Application or apps@hittite.com

10 HMC44ST8 / 44ST8E 16 & 214 MHz Evaluation PCB List of Materials for Evaluation PCB 1774 [1] Item J1 - J2 J3 - J4 C1 C2 C3 C4 C L1 U1 PCB [2] Description PCB Mount SMA Connector DC Pins 1. pf Capacitor, 42 Pkg. 1.2 pf Capacitor, 42 Pkg. 3. pf Capacitor, 42 Pkg. 1 pf Capacitor, 42 Pkg. 2.2 μf Capacitor, Tantalum 8.2 nh Inductor, 42 Pkg. HMC44ST8 / HMC44ST8E Evaluation PCB, 1 mils [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 43, Er = 3.48 The circuit board used in this application should use RF circuit design techniques. Signal lines should have Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. One Technology Way, P.O. Box 16, Norwood, MA Phone: Fax: Phone: Order On-line at Application Support: Phone: Application or apps@hittite.com - 1

11 HMC44ST8 / 44ST8E Alternative MHz Application Circuit, Optimal OIP3 Layout This alternate application circuit for MHz applications features a resonating I/O structure on the PCB that, while using more PCB area, will improve output IP3 from +4 dbm to +42 dbm. This circuit will satisfy many applications from 7 to 12 MHz as the typical performance below demonstrates. Contact the HMC Applications Group for assistance in optimizing performance for your application. TL1 TL2 TL3 Impedance Ohm Ohm Ohm Physical Length.3..3 Electrical Length PCB Material: 1 mil Rogers 43, Er = 3.48 Broadband Gain & Return Loss RESPONSE (db) S21 S11 S22 IP3 (dbm), P1dB (dbm) Recommended Component Values L1 C1 18 nh 4 pf C2, C6 1 pf C3 C4 C Output IP3 & P1dB IP3 P1dB 3 pf 1 pf 2.2 μf One Technology Way, P.O. Box 16, Norwood, MA Phone: Fax: Phone: Order On-line at Application Support: Phone: Application or apps@hittite.com

12 HMC44ST8 / 44ST8E Alternate MHz Evaluation PCB List of Materials Item Description J1 - J2 PCB Mount SMA Connector J3 - J4 DC Pins C1 4 pf Capacitor, 42 Pkg. C2, C6 1 pf Capacitor, 42 Pkg. C3 3. pf Capacitor, 42 Pkg. C4 1 pf Capacitor, 42 Pkg L1 18 nh Inductor, 42 Pkg. U1 HMC44ST8 / HMC44ST8E PCB* 177 Evaluation PCB, 1 mils * Circuit Board Material: Rogers 43, Er = 3.48 The circuit board used in this application should use RF circuit design techniques. Signal lines should have Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. One Technology Way, P.O. Box 16, Norwood, MA Phone: Fax: Phone: Order On-line at Application Support: Phone: Application or apps@hittite.com - 21

HMC454ST89 / 454ST89E. Features. = +25 C, Vs= +5V [1]

HMC454ST89 / 454ST89E. Features. = +25 C, Vs= +5V [1] Typical Applications The HMC44ST8 / HMC44ST8E is ideal for applications requiring a high dynamic range amplifi er: GSM, GPRS & EDGE CDMA & W-CDMA CATV/Cable Modem Fixed Wireless & WLL Features Output IP3:

More information

HMC454ST89 / 454ST89E

HMC454ST89 / 454ST89E HMC44ST8 / 44ST8E Typical Applications The HMC44ST8 / HMC44ST8E is ideal for applications requiring a high dynamic range amplifi er: GSM, GPRS & EDGE CDMA & W-CDMA CATV/Cable Modem Fixed Wireless & WLL

More information

HMC457QS16G / 457QS16GE

HMC457QS16G / 457QS16GE v3.97 HMC47QS16G / 47QS16GE Typical Applications The HMC47QS16G / HMC47QS16GE is ideal for applications requiring a high dynamic range amplifi er: CDMA & W-CDMA GSM, GPRS & Edge Base Stations & Repeaters

More information

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v2.65 HMC455LP3 / 455LP3E Typical

More information

HMC580ST89 / 580ST89E. Features OBSOLETE. DC GHz GHz GHz. db db db Gain Variation Over Temperature DC GHz 0.

HMC580ST89 / 580ST89E. Features OBSOLETE. DC GHz GHz GHz. db db db Gain Variation Over Temperature DC GHz 0. v.71 HMC5ST9 / 5ST9E Typical Applications The HMC5ST9 / HMC5ST9E is ideal forr: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment IF & RF Applications Functional

More information

Features OBSOLETE. DC GHz GHz GHz GHz GHz

Features OBSOLETE. DC GHz GHz GHz GHz GHz v2.71 HMC75ST9 / 75ST9E Typical Applications The HMC75ST9 / HMC75ST9E is an ideal RF/IF gain block & LO or PA driver: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio &

More information

HMC480ST89 / 480ST89E

HMC480ST89 / 480ST89E v2.7 HMCST9 / ST9E Typical Applications The HMCST9 / HMCST9E is an ideal RF/IF gain block & LO or PA driver for: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test

More information

HMC589ST89 / 589ST89E. Features OBSOLETE. DC GHz GHz GHz. db Gain 22

HMC589ST89 / 589ST89E. Features OBSOLETE. DC GHz GHz GHz. db Gain 22 v.71 HMC59ST9 / 59ST9E Typical Applications The HMC59ST9 / HMC59ST9E is ideal for: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment IF & RF Applications

More information

HMC326MS8G / 326MS8GE

HMC326MS8G / 326MS8GE v9.511 AMPLIFIER, 3. - 4.5 GHz Typical Applications The HMC326MS8G / HMC326MS8GE is ideal for: Microwave Radios Broadband Radio Systems Wireless Local Loop Driver Amplifier Functional Diagram Features

More information

HMC639ST89 / 639ST89E

HMC639ST89 / 639ST89E Typical Applications The HMC39ST9(E) is ideal for: Cellular / PCS / 3G WiMAX, WiBro, & Fixed Wireless CATV & Cable Modem Microwave Radio IF and RF Sections Functional Diagram Electrical Specifications,

More information

HMC639ST89 / 639ST89E

HMC639ST89 / 639ST89E v3.1 HMC63ST / 63STE AMPLIFIER,.2-4. GHz Typical Applications The HMC63ST(E) is ideal for: Cellular / PCS / 3G WiMAX, WiBro, & Fixed Wireless CATV & Cable Modem Microwave Radio IF and RF Sections Features

More information

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com HMC461* Product Page Quick Links Last Content Update: 8/3/216 Comparable

More information

Features. DC GHz GHz GHz DC GHz GHz GHz GHz DC - 4 GHz GHz Supply Current (Icq) ma

Features. DC GHz GHz GHz DC GHz GHz GHz GHz DC - 4 GHz GHz Supply Current (Icq) ma HMC311ST9 / 311ST9E v.17 MMIC AMPLIFIER, DC - GHz Typical Applications The HMC311ST9(E) is ideal for: Cellular / PCS / 3G Fixed Wireless & WLAN CATV & Cable Modem Microwave Radio Functional Diagram Features

More information

HMC471MS8G / 471MS8GE. Features OBSOLETE. DC GHz GHz GHz GHz GHz

HMC471MS8G / 471MS8GE. Features OBSOLETE. DC GHz GHz GHz GHz GHz v1.65 Typical Applications The HMC471MSG / HMC471MSGE is a dual RF/IF gain block & LO or PA driver: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment Functional

More information

Features. = +25 C, Vs = +5V. Parameter Min. Typ. Max. Min. Typ. Max. Units Frequency Range MHz Gain

Features. = +25 C, Vs = +5V. Parameter Min. Typ. Max. Min. Typ. Max. Units Frequency Range MHz Gain Typical Applications Functional Diagram The HMC32LP3 / HMC32LP3E is ideal for basestation receivers: GSM, GPRS & EDGE CDMA & W-CDMA Private Land Mobile Radio HMC32LP3 / 32LP3E AMPLIFIER, 00-1000 MHz Features

More information

HMC478SC70 / 478SC70E v

HMC478SC70 / 478SC70E v HMC47SC7 / 47SC7E v2.14 Typical Applications The HMC47SC7(E) is an ideal for: Cellular / PCS / 3G WiBro / WiMAX / 4G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment Functional

More information

HMC599ST89 / 599ST89E. Features. The HMC599ST89(E) is ideal for: = +25 C MHz. Gain Variation Over Temperature MHz 0.

HMC599ST89 / 599ST89E. Features. The HMC599ST89(E) is ideal for: = +25 C MHz. Gain Variation Over Temperature MHz 0. HMCST / STE Typical Applications v2.3 GaAs phemt MMIC LNA, Ohm - 1 MHz Features The HMCST(E) is ideal for: High P1 Output Power: +1 m VHF / UHF Antennas HDTV Receivers CMTS Equipment CATV, Cable Modem

More information

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC476SC7 / 476SC7E v4.814 Typical

More information

Features OBSOLETE. Saturated Output Power (Psat) dbm Output Third Order Intercept (IP3) dbm Supply Current (Idd) ma

Features OBSOLETE. Saturated Output Power (Psat) dbm Output Third Order Intercept (IP3) dbm Supply Current (Idd) ma 7 Typical Applications The HMC667LP2(E) is ideal for: WiMAX, WiBro & Fixed Wireless SDARS & WLAN Receivers Infrastructure & Repeaters Access Points Telematics & DMB Functional Diagram v2.11 Electrical

More information

Features

Features HMC37SC7E v1.1.3-3. GHz Typical Applications The HMC37SC7E is ideal for: Cellular/PCS/3G WCS, mmds & ism Fixed Wireless & WLAN Private Land Mobile Radio Functional Diagram Features Single Supply: Vdd =

More information

Features OBSOLETE. = +25 C, as a function of Vdd. Vdd = +3V Vdd = +5V Vdd = +5V Vdd = +5V Parameter

Features OBSOLETE. = +25 C, as a function of Vdd. Vdd = +3V Vdd = +5V Vdd = +5V Vdd = +5V Parameter v5.117 HMC3 / 3E GENERAL PURPOSE 1 mw GaAs MMIC AMPLIFIER,. - 3. GHz Typical Applications Broadband or Narrow Band Applications: Cellular/PCS/3G Fixed Wireless & Telematics Cable Modem Termination Systems

More information

HMC486LP5 / 486LP5E LINEAR & POWER AMPLIFIERS - SMT. SURFACE MOUNT PHEMT 2 WATT POWER AMPLIFIER, 7-9 GHz. Typical Applications.

HMC486LP5 / 486LP5E LINEAR & POWER AMPLIFIERS - SMT. SURFACE MOUNT PHEMT 2 WATT POWER AMPLIFIER, 7-9 GHz. Typical Applications. v2. Typical Applications The HMC486LP5(E) is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment and Sensors Military End-Use Features Saturated Power: +33 dbm @ 2% PAE Output IP3:

More information

Features. = +25 C, Vdd= +3V. Parameter Min. Typ. Max. Units Frequency Range GHz Gain db

Features. = +25 C, Vdd= +3V. Parameter Min. Typ. Max. Units Frequency Range GHz Gain db 7 Typical Applications The HMC286 / HMC286E is ideal for: BlueTooth Home RF 82.11 WLAN Radios PCMCIA Platforms Functional Diagram v3.41 Features 2.4 GHz LNA Noise Figure: 1.7 db Gain: 19 db Single Supply:

More information

Features. = +25 C, Vcc = +5.0V. Vcc = +5V Parameter

Features. = +25 C, Vcc = +5.0V. Vcc = +5V Parameter Typical Applications Ideal as a Driver & Amplifier for: 2.2-2.7 GHz MMDS 3. GHz Wireless Local Loop - 6 GHz UNII & HiperLAN Functional Diagram Features P1dB Output Power: +14 dbm Output IP3: +27 dbm Gain:

More information

TEL: FAX: v.117 HMC3 / 3E GENERAL PURPOSE 1 mw GaAs MMIC AMPLIFIER, GHz Broadband Gain & Return Vdd =

TEL: FAX: v.117 HMC3 / 3E GENERAL PURPOSE 1 mw GaAs MMIC AMPLIFIER, GHz Broadband Gain & Return Vdd = TEL:7-339622 FAX:7-337612 E-MAIL: szss@3.com v.117 HMC3 / 3E GENERAL PURPOSE 1 mw GaAs MMIC AMPLIFIER,. - 3. GHz Typical Applications Broadband or Narrow Band Applications: Cellular/PCS/3G Fixed Wireless

More information

Features. = +25 C, Vdd = +5V, Idd = 400mA [1]

Features. = +25 C, Vdd = +5V, Idd = 400mA [1] v.61 Typical Applications The is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios VSAT Military & Space Features Saturated Output Power:.5 dbm @ 21% PAE High Output IP3: 34.5 dbm High Gain:.5

More information

Features. = +25 C, Vdd = +5V, Rbias = 10 Ohms*

Features. = +25 C, Vdd = +5V, Rbias = 10 Ohms* Typical Applications Functional Diagram The HMC36LP3 / HMC36LP3E is ideal for: Cellular/3G Infrastructure Base Stations & Repeaters CDMA, W-CDMA, & TD-SCDMA Private Land Mobile Radio GSM/GPRS & EDGE UHF

More information

Features. = +25 C, Vdd = +7V, Idd = 1340 ma [1]

Features. = +25 C, Vdd = +7V, Idd = 1340 ma [1] Typical Applications The HMC591LP5 / HMC591LP5E is ideal for use as a power amplifi er for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment & Sensors Military End-Use Space Features Saturated

More information

Features. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 80 ma [2]

Features. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 80 ma [2] Typical Applications This is ideal for: Features Low Noise Figure: 1.8 db Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation Functional Diagram High Gain: 19 db High

More information

SURFACE MOUNT PHEMT 2 WATT POWER AMPLIFIER,

SURFACE MOUNT PHEMT 2 WATT POWER AMPLIFIER, v2.617 AMPLIFIER, - 12 GHz Typical Applications The is ideal for use as a power amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment and Sensors Military End-Use Features Saturated

More information

Features. = +25 C, Vcc1 = Vcc2 = 5V, Zo = 75 Ohm [1]

Features. = +25 C, Vcc1 = Vcc2 = 5V, Zo = 75 Ohm [1] HMC754SGE v.49 Typical Applications The HMC754SGE is ideal for: CATV / Broadband Infrastructure Test & Measurement Equipment Line Amps and Fiber Nodes Customer Premise Equipment Functional Diagram Output

More information

Features. = +25 C, Vs = +5V, Vpd = +5V, Vbias=+5V

Features. = +25 C, Vs = +5V, Vpd = +5V, Vbias=+5V v4.1217 HMC49LP4E Typical Applications This amplifier is ideal for use as a power amplifier for 3.3-3.8 GHz applications: WiMAX 82.16 Fixed Wireless Access Wireless Local Loop Functional Diagram Features

More information

HMC1040LP3CE. Amplifiers - Low Noise - smt. GaAs phemt MMIC LOW NOISE AMPLIFIER, GHz. Features. Typical Applications. General Description

HMC1040LP3CE. Amplifiers - Low Noise - smt. GaAs phemt MMIC LOW NOISE AMPLIFIER, GHz. Features. Typical Applications. General Description v.112 HMC14LP3CE AMPLIFIER, 24-43. GHz Typical Applications This HMC14LP3BE is ideal for: Point-to-Point Radios Test Instrumentation SatCom Transponders & VSAT Industrial Sensors EW & ECM Subsystems Functional

More information

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v3.38 POWER AMPLIFIER, 2-2 GHz Typical

More information

Gain Control Range db

Gain Control Range db v1.112-12 GHz Typical Applications The is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM Subsystems X-Band Radar Test Equipment & Sensors Functional Diagram Features Wide Gain Control

More information

HMC694LP4 / 694LP4E. Variable gain amplifiers - ANALOG - smt. GaAs MMIC ANALOG VARIABLE GAIN AMPLIFIER, 6-17 GHz. Typical Applications

HMC694LP4 / 694LP4E. Variable gain amplifiers - ANALOG - smt. GaAs MMIC ANALOG VARIABLE GAIN AMPLIFIER, 6-17 GHz. Typical Applications v2.1 Typical Applications The HMC694LP4(E) is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM X-Band Radar Test Equipment Features Wide Gain Control Range: 23 db Single Control Voltage

More information

HMC618ALP3E AMPLIFIERS - LOW NOISE - SMT. GaAs SMT phemt LOW NOISE AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram

HMC618ALP3E AMPLIFIERS - LOW NOISE - SMT. GaAs SMT phemt LOW NOISE AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram 7 Typical Applications The is ideal for: Cellular/3G and LTE/WiMAX/4G BTS & Infrastructure Repeaters and Femto Cells Public Safety Radios Functional Diagram v. Electrical Specifications T A = + C, Rbias

More information

OBSOLETE HMC915LP4E. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram. General Description

OBSOLETE HMC915LP4E. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram. General Description v1.5 LO AMPLIFIER,.5-2.7 GHz Typical Applications The is ideal for: PCS / 3G Infrastructure Base Stations & Repeaters WiMAX & WiBro ISM & Fixed Wireless Functional Diagram Features Input IP3: +28 dbm Low

More information

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.51 HMC32LC Typical Applications

More information

Features. Output Power for 1 db Compression (P1dB) dbm Saturated Output Power (Psat) dbm

Features. Output Power for 1 db Compression (P1dB) dbm Saturated Output Power (Psat) dbm v1.314 Typical Applications Features The is ideal for: Test Instrumentation Microwave Radio & VSAT Telecom Infrastructure Military & Space Fiber optics Functional Diagram P1dB Output Power: +27 dbm Psat

More information

Parameter Min. Typ. Max. Units Frequency Range GHz

Parameter Min. Typ. Max. Units Frequency Range GHz v.312 27-31. GHz Typical Applications The is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM Subsystems Ka-Band Radar & VSAT Test Equipment Functional Diagram Features Wide Gain Control

More information

Features. = +25 C, 50 Ohm System, Vcc= +3V

Features. = +25 C, 50 Ohm System, Vcc= +3V v.1 HMC32 / 32E Typical Applications Prescaler for DC to C Band PLL Applications: UNII, Point-to-Point & VSAT Radios 82.11a & HiperLAN WLAN Fiber Optic Cellular / 3G Infrastructure Functional Diagram Features

More information

Features. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 70 ma

Features. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 70 ma v2.61 Typical Applications This is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation Functional Diagram Features Low Noise Figure: 2.5 db Gain: 13 db P1dB

More information

Features. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 45 ma

Features. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 45 ma v2.61 Typical Applications This is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation Functional Diagram Features Low Noise Figure: 2. db High Gain: 22 db

More information

Features. = +25 C, Vdd= 5V. Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz

Features. = +25 C, Vdd= 5V. Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz Typical Applications The HMC62LP / HMC62LPE Wideband LNA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military EW, ECM & C 3 I Test Instrumentation Fiber Optics Functional Diagram Features

More information

Features OBSOLETE. Parameter Min. Typ. Max. Units. Frequency Range GHz Insertion Loss 5 7 db. Input Return Loss 16 db

Features OBSOLETE. Parameter Min. Typ. Max. Units. Frequency Range GHz Insertion Loss 5 7 db. Input Return Loss 16 db v1.611 Typical Applications The is ideal for: EW Receivers Weather & Military Radar Satellite Communications Beamforming Modules Phase Cancellation Functional Diagram Features Low RMS Phase Error: 1.2

More information

Features. = +25 C, Vcc(RF), Vcc(DIG) = +5V

Features. = +25 C, Vcc(RF), Vcc(DIG) = +5V & DIVIDE-BY-16, 23. - 26. GHz Typical Applications The HMC739LP4(E) is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios / LMDS VSAT Features Pout: + dbm Phase Noise: -93 dbc/hz @ 100 khz Typ.

More information

Features. = +25 C, Vcc= 5V

Features. = +25 C, Vcc= 5V v4.21 Typical Applications Active Multiplier for X Band Applications: Fiber Optic Point-to-Point Radios Military Radar Functional Diagram Features Output Power: +4 dbm Sub-Harmonic Suppression: >2 dbc

More information

Features = +5V. = +25 C, Vdd 1. = Vdd 2

Features = +5V. = +25 C, Vdd 1. = Vdd 2 v1.11 HMC51LP3 / 51LP3E POWER AMPLIFIER, 5-1 GHz Typical Applications The HMC51LP3(E) is ideal for: Microwave Radio & VSAT Military & Space Test Equipment & Sensors Fiber Optics LO Driver for HMC Mixers

More information

Features. = +25 C, Vcc =5V, Vpd = 5V. Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max Units

Features. = +25 C, Vcc =5V, Vpd = 5V. Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max Units v2.917 Typical Applications Features The is ideal for: Point-to-Point Radios Point-to-Multipoint Radios VSAT LO Driver for HMC Mixers Military EW & ECM Functional Diagram High Output IP3: +28 dbm Single

More information

Features. = +25 C, Vdd= +12V, Vgg2= +5V, Idd= 400 ma*

Features. = +25 C, Vdd= +12V, Vgg2= +5V, Idd= 400 ma* Typical Applications The HMC637LP5(E) wideband PA is ideal for: Features P1dB Output Power: +29 dbm Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Fiber Optics Functional

More information

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.51 HMC7LP5E POWER AMPLIFIER,.2

More information

HMC320MS8G / 320MS8GE. Features OBSOLETE. = +25 C, Vdd = +3V

HMC320MS8G / 320MS8GE. Features OBSOLETE. = +25 C, Vdd = +3V Typical Applications The HMCMSG(E) is ideal for: UNII HiperLAN Functional Diagram v. Electrical Specifications, T A = + C, Vdd = +V HMCMSG / MSGE Features General Description Selectable Functionality:

More information

Features. = +25 C, Vcc = +8V

Features. = +25 C, Vcc = +8V v2.19 HMC5LP3 / 5LP3E Typical Applications The HMC5LP3(E) is ideal for: Wireless Infrastructure HPA & MCPA Error Correction Pre-Distortion or Feed-Forward Linearization PCS, GSM and W-CDMA Systems Beam

More information

Features. = +25 C, Vcc = +3V

Features. = +25 C, Vcc = +3V Typical Applications Low noise MMIC VCO w/buffer Amplifi er for: VSAT & Microwave Radio Test Equipment & Industrial Controls Military Features Pout: +dbm Phase Noise: -106 dbc/hz @100 khz No External Resonator

More information

Features = +5V. = +25 C, Vdd 1. = Vdd 2

Features = +5V. = +25 C, Vdd 1. = Vdd 2 v7.11 HMC1LC3 POWER AMPLIFIER, - GHz Typical Applications The HMC1LC3 is ideal for use as a medium power amplifier for: Microwave Radio & VSAT Military & Space Test Equipment & Sensors Fiber Optics LO

More information

Analog Devices Welcomes Hittite Microwave Corporation

Analog Devices Welcomes Hittite Microwave Corporation Analog Devices Welcomes Hittite Microwave Corporation www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.915 GaAs MMIC 6-BIT DIGITAL Typical Applications The HMC648ALP6E is ideal for:

More information

Features OBSOLETE. = +25 C, Rbias = 0 Ohm. Bypass Mode Failsafe Mode Parameter

Features OBSOLETE. = +25 C, Rbias = 0 Ohm. Bypass Mode Failsafe Mode Parameter 7 Typical Applications The HMC668LP3(E) is ideal for: Cellular/3G and LTE/WiMAX/4G BTS & Infrastructure Repeaters and Femtocells Tower Mounted Amplifiers Test & Measurement Equipment Functional Diagram

More information

HMC948LP3E POWER DETECTORS - SMT. 54 db, LOGARITHMIC DETECTOR, 1-23 GHz. Typical Applications. Features. Functional Diagram. General Description

HMC948LP3E POWER DETECTORS - SMT. 54 db, LOGARITHMIC DETECTOR, 1-23 GHz. Typical Applications. Features. Functional Diagram. General Description v.9 HMC948LPE DETECTOR, - GHz Typical Applications The HMC948LPE is ideal for: Point-to-Point Microwave Radio VSAT Wideband Power Monitoring Receiver Signal Strength Indication (RSSI) Test & Measurement

More information

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v1.14 AMPLIFIER, 18-4 GHz Typical

More information

Parameter Min. Typ. Max. Units

Parameter Min. Typ. Max. Units v4.112 Typical Applications The is ideal for: Point-to-Point and Point-to-Multi-Point Radio Military Radar, EW & ELINT Satellite Communications Functional Diagram Features General Description The is a

More information

OBSOLETE HMC5846LS6 AMPLIFIERS - LINEAR & POWER - SMT. Electrical Specifications, T A. Features. Typical Applications. General Description

OBSOLETE HMC5846LS6 AMPLIFIERS - LINEAR & POWER - SMT. Electrical Specifications, T A. Features. Typical Applications. General Description v1.414 Typical Applications The HMC846LS6 is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios VSAT & SATCOM Military & Space Functional Diagram Electrical Specifications, T A = +2 C Vdd = Vdd1,

More information

Features. Parameter Frequency Min. Typ. Max. Units Insertion Loss DC GHz db. DC GHz

Features. Parameter Frequency Min. Typ. Max. Units Insertion Loss DC GHz db. DC GHz v1.11 HMC55 / 55E Typical Applications The HMC55 / HMC55E is ideal for: RFID & Electronic Toll Collection (etc) Tags, Handsets & Portables ISM, WLAN, WiMAX & WiBro Automotive Telematics Test Equipment

More information

Features. = +25 C, Vcc = 5V, Vpd = 5V. Parameter Min. Typ. Max. Min. Typ. Max. Units

Features. = +25 C, Vcc = 5V, Vpd = 5V. Parameter Min. Typ. Max. Min. Typ. Max. Units v2.717 MMIC AMPLIFIER, 4 - GHz Typical Applications The is ideal for: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment IF & RF Applications Functional

More information

Features. = +25 C, Vcc = +3V

Features. = +25 C, Vcc = +3V Typical Applications Low noise MMIC VCO w/buffer Amplifi er for: Wireless Local Loop (WLL) VSAT & Microwave Radio Test Equipment & Industrial Controls Military Features Pout: +4.9 dbm Phase Noise: -3 dbc/hz

More information

HMC310MS8G / 310MS8GE. Features OBSOLETE. = +25 C, Vdd = +3V

HMC310MS8G / 310MS8GE. Features OBSOLETE. = +25 C, Vdd = +3V Typical Applications Transmit & Receive Switch for 2. GHz Applications: Bluetooth HomeRF WLAN Radios Functional Diagram v3.67 Electrical Specifications, T A = +25 C, Vdd = +3V HMC31MSG / 31MSGE Features

More information

Features. Parameter Min Typ. Max Min Typ. Max Min Typ Max Units Frequency Range GHz Gain

Features. Parameter Min Typ. Max Min Typ. Max Min Typ Max Units Frequency Range GHz Gain Typical Applications The is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios VSAT & SATCOM Marine Radar Military EW & ECM Functional Diagram Features High Saturated Output Power: dbm @ % PAE

More information

Features. = +25 C, Vdd = 5V

Features. = +25 C, Vdd = 5V v3.117 HMC1LH5 Typical Applications The HMC1LH5 is a medium PA for: Telecom Infrastructure Military Radio, Radar & ECM Space Systems Test Instrumentation Functional Diagram Features Gain: 5 db Saturated

More information

OBSOLETE. = +25 C, Vdd = Vs= +5V, Vctl= 0/ +5V. Parameter Frequency Min. Typ. Max. Units DC GHz 37. db Gain (Maximum Gain State)

OBSOLETE. = +25 C, Vdd = Vs= +5V, Vctl= 0/ +5V. Parameter Frequency Min. Typ. Max. Units DC GHz 37. db Gain (Maximum Gain State) v.1212.5 db LSB GaAs MMIC 6-BIT DIGITAL Typical Applications The is ideal for: IF & RF Applications Cellular/3G Infrastructure WiBro / WiMAX / 4G Microwave Radio & VSAT Test Equipment and Sensors Functional

More information

Features OBSOLETE. = +25 C, 50 Ohm System GHz degrees Insertion Loss 6-15 GHz 8 11 db. Return Loss (Input and Output) 6-15 GHz 7 db

Features OBSOLETE. = +25 C, 50 Ohm System GHz degrees Insertion Loss 6-15 GHz 8 11 db. Return Loss (Input and Output) 6-15 GHz 7 db v2.29 6 ANALOG PHASE SHIFTER, 1 Typical Applications The HMC538LP4 / HMC538LP4E is ideal for: Fiber Optics Military Test Equipment Functional Diagram Features Electrical Specifications, T A = +25 C, 5

More information

Features. = +25 C, Vdd= 8V, Vgg2= 3V, Idd= 290 ma [1]

Features. = +25 C, Vdd= 8V, Vgg2= 3V, Idd= 290 ma [1] Typical Applications The is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military EW, ECM & C 3 I Test Instrumentation Fiber Optics Functional Diagram Features P1dB Output Power: + dbm Gain:

More information

Features. = +25 C, Vdd = +5V, 5 dbm Drive Level

Features. = +25 C, Vdd = +5V, 5 dbm Drive Level v1.4 Typical Applications The HMC561LP3E are suitable for: Clock Generation Applications: SONET OC-192 & SDH STM-64 Point-to-Point & VSAT Radios Test Instrumentation Military & Space Functional Diagram

More information

Features. = +25 C, Vdd1, 2, 3 = 5V, Idd = 250 ma*

Features. = +25 C, Vdd1, 2, 3 = 5V, Idd = 250 ma* v.4 HMC498LC4 Typical Applications Features The HMC498LC4 is ideal for use as a LNA or Driver amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment & Sensors Military End-Use

More information

HMC546MS8G / 546MS8GE

HMC546MS8G / 546MS8GE v6.89 HMC546MS8G / 546MS8GE GaAs MMIC 2W FAILSAFE SWITCH.2-2.2 GHz Typical Applications The HMC546MS8G(E) is ideal for: LNA Protection, WiMAX, WiBro Cellular/PCS/3G Infrastructure Private Mobile Radio

More information

HMC997LC4. Variable Gain Amplifier - SMT. VARIABLE GAIN AMPLIFIER GHz. Typical Applications. General Description. Functional Diagram

HMC997LC4. Variable Gain Amplifier - SMT. VARIABLE GAIN AMPLIFIER GHz. Typical Applications. General Description. Functional Diagram v2.14 Typical Applications The is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM Subsystems Ka-Band Radar Test Equipment Functional Diagram Features Wide Gain Control Range: 1 db Single

More information

Features. Parameter Frequency Min. Typ. Max. Units Insertion Loss DC GHz db

Features. Parameter Frequency Min. Typ. Max. Units Insertion Loss DC GHz db v.1212 HMC55A / 55AE Typical Applications The HMC55A / HMC55AE is ideal for: RFID & Electronic Toll Collection (ETC) Tags, Handsets & Portables ISM, WLAN, WiMAX & WiBro Automotive Telematics Test Equipment

More information

Features. Gain: 17 db. OIP3: 25 dbm. = +25 C, Vdd 1, 2 = +3V

Features. Gain: 17 db. OIP3: 25 dbm. = +25 C, Vdd 1, 2 = +3V v.7 HMCLC Typical Applications The HMCLC is ideal for use as a LNA or driver amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment and Sensors Military & Space Functional

More information

Features. = +25 C, Vss= -5V, Vdd= +5V, Control Voltage= 0/ +5V, 50 Ohm System. Frequency Range GHz Insertion Loss* 4 6.

Features. = +25 C, Vss= -5V, Vdd= +5V, Control Voltage= 0/ +5V, 50 Ohm System. Frequency Range GHz Insertion Loss* 4 6. v1.28 HMC647LP6 / 647LP6E Typical Applications The HMC647LP6(E) is ideal for: EW Receivers Weather & Military Radar Satellite Communications Beamforming Modules Phase Cancellation Functional Diagram Features

More information

Features OBSOLETE. = +25 C, Vcc1, Vcc2 = +5.0V. Parameter Min. Typ. Max. Units Frequency Range GHz. Divided Output

Features OBSOLETE. = +25 C, Vcc1, Vcc2 = +5.0V. Parameter Min. Typ. Max. Units Frequency Range GHz. Divided Output v3.81 Typical Applications Low noise MMIC VCO w/divide-by-8 for Ku-Band applications such as: Point-to-Point Radios Point-to-Multi-Point Radios / LMDS VSAT Functional Diagram Features Electrical Specifications,

More information

HMC659LC5 LINEAR & POWER AMPLIFIERS - SMT. GaAs PHEMT MMIC POWER AMPLIFIER, DC - 15 GHz. Features. Typical Applications. General Description

HMC659LC5 LINEAR & POWER AMPLIFIERS - SMT. GaAs PHEMT MMIC POWER AMPLIFIER, DC - 15 GHz. Features. Typical Applications. General Description v.61 Typical Applications The wideband PA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Fiber Optics Functional Diagram Features P1dB Output Power: +27.5

More information

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v3.1211 45 Analog Phase Shifter,

More information

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v1.414 Typical Applications The HMC5846LS6

More information

Features. = +25 C, Vcc = +5V. Parameter Min. Typ. Max. Units Fo Fo/2 RFOUT RFOUT/2

Features. = +25 C, Vcc = +5V. Parameter Min. Typ. Max. Units Fo Fo/2 RFOUT RFOUT/2 v4.11 HMC5LP5 / 5LP5E OUTPUT 7.3 -.2 GHz Typical Applications Low noise MMIC VCO w/half Frequency, for: VSAT Radio Point to Point/Multi-Point Radio Test Equipment & Industrial Controls Military End-Use

More information

Features. Parameter Frequency (GHz) Min. Typ. Max. Units GHz GHz GHz. Attenuation Range GHz 15.

Features. Parameter Frequency (GHz) Min. Typ. Max. Units GHz GHz GHz. Attenuation Range GHz 15. v.91.5 db LSB GaAs MMIC 5-BIT DIGITAL ATTENUATOR,.1-33 GHz Typical Applications The HMC941LP4 / HMC941LP4E is ideal for: Fiber Optics & Broadband Telecom Microwave Radio & VSAT Military Radios, Radar &

More information

HMC695LP4 / HMC695LP4E

HMC695LP4 / HMC695LP4E v.1 Typical Applications The HMC95LP(E) is ideal for: Fiber Optic Applications Point-to-Point Radios Military Radar Functional Diagram Features Output Power: +7 dbm Sub-Harmonic Suppression: >5 dbc SSB

More information

Features. = +25 C, Vdd 1, 2, 3 = +3V

Features. = +25 C, Vdd 1, 2, 3 = +3V v.11 HMC6LC AMPLIFIER, 6-2 GHz Typical Applications The HMC6LC is ideal for use as a LNA or driver amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment and Sensors Military

More information

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK Typical Applications Transmit & Receive

More information

HMC437MS8G / 437MS8GE

HMC437MS8G / 437MS8GE v5.1211 HMC37MS8G / 37MS8GE Typical Applications Prescaler for DC to C Band PLL Applications: UNII, Point-to-Point & VSAT Radios 82.11a & HiperLAN WLAN Fiber Optic Cellular / 3G Infrastructure Functional

More information

Features OBSOLETE. = +25 C, 50 Ohm System, Vcc= 3V

Features OBSOLETE. = +25 C, 50 Ohm System, Vcc= 3V Typical Applications Prescaler for DC to 4. GHz PLL Applications: DBS/CATV Tuners 82.11x & HiperLAN WLAN Fixed Wireless & WLL Microwave & VSAT Radios Cellular & 3G Functional Diagram v.93 HMC42MS8 / 42MS8E

More information

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v2.49 Typical Applications The HMC536LP2(E)

More information

HMC358MS8G / 358MS8GE

HMC358MS8G / 358MS8GE Typical Applications Low noise MMIC VCO w/buffer Amplifi er for C-Band applications such as: UNII & Pt. to Pt. Radios 802.a & HiperLAN WLAN VSAT Radios Features Pout: + dbm Phase Noise: -0 dbc/hz @100

More information

Frequency vs. Tuning Voltage, Vcc = +4.2V 17 Frequency vs. Tuning Voltage, T= 25 C FREQUENCY (GHz) FREQUENCY (GHz) Vcc = 4.

Frequency vs. Tuning Voltage, Vcc = +4.2V 17 Frequency vs. Tuning Voltage, T= 25 C FREQUENCY (GHz) FREQUENCY (GHz) Vcc = 4. Typical Applications The HMC736LP4(E) is ideal for: Point to Point/Multipoint Radio Test Equipment & Industrial Controls SATCOM Military End-Use Functional Diagram Features Dual Output: Fo = Fo/2 = 7.25-7.5

More information

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK Typical Applications Prescaler for

More information

Features. = +25 C, Vdd= 8V, Idd= 75 ma*

Features. = +25 C, Vdd= 8V, Idd= 75 ma* HMC46LC5 Typical Applications v3.11 AMPLIFIER, DC - 2 GHz Features The HMC46LC5 is ideal for: Noise Figure: 2.5 db @ 1 GHz Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation

More information

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.41 Typical Applications The HMC649ALP6E

More information

Features. = +25 C, Vcc1, Vcc2 = +5V. Parameter Min. Typ. Max. Units Fo Fo/2 RFOUT RFOUT/2 RFOUT/4

Features. = +25 C, Vcc1, Vcc2 = +5V. Parameter Min. Typ. Max. Units Fo Fo/2 RFOUT RFOUT/2 RFOUT/4 v4.11 Typical Applications Low noise MMIC VCO w/half Frequency, Divide-by-4 Outputs for: VSAT Radio Point to Point/Multipoint Radio Test Equipment & Industrial Controls Military End-Use Functional Diagram

More information

Features OBSOLETE. = +25 C, Vctl = 0/+8 Vdc, 50 Ohm System. Parameter Frequency* Min. Typ. Max. Units Tx - RFC MHz db.

Features OBSOLETE. = +25 C, Vctl = 0/+8 Vdc, 50 Ohm System. Parameter Frequency* Min. Typ. Max. Units Tx - RFC MHz db. GaAs MMIC 1W T/R Typical Applications Features 1 The HMC446 / HMC446E is ideal for: ISM/Cellular Portables/Handsets Automotive Telematic Applications Mobile Radio Functional Diagram Low Insertion Loss:.6

More information

Features. = +25 C, Vcc1, Vcc2, Vcc3 = +5V. Parameter Min. Typ. Max. Units Frequency Range GHz

Features. = +25 C, Vcc1, Vcc2, Vcc3 = +5V. Parameter Min. Typ. Max. Units Frequency Range GHz Typical Applications Low noise MMIC VCO w/divide-by-16 for: VSAT Radio Point to Point/Multipoint Radio Test Equipment & Industrial Controls Military End-Use Automotive Radar Features Pout: + dbm Phase

More information

HMC274QS16 / 274QS16E. Features OBSOLETE. = +25 C, Vdd = +3V to +5V & Vctl = 0/Vdd. Parameter Frequency Min. Typical Max. Units

HMC274QS16 / 274QS16E. Features OBSOLETE. = +25 C, Vdd = +3V to +5V & Vctl = 0/Vdd. Parameter Frequency Min. Typical Max. Units Typical Applications Functional Diagram v1. The HMC274QS16 / HMC274QS16E is ideal for: Cellular/PCS/3G Infrastructure 2.4 GHz ISM Radios Wireless Data HMC274QS16 / 274QS16E 1 LSB GaAs IC -BIT DIGITAL ATTENUATOR,.7-2.7

More information

Features. Gain: 14.5 db. Electrical Specifications [1] [2] = +25 C, Rbias = 825 Ohms for Vdd = 5V, Rbias = 5.76k Ohms for Vdd = 3V

Features. Gain: 14.5 db. Electrical Specifications [1] [2] = +25 C, Rbias = 825 Ohms for Vdd = 5V, Rbias = 5.76k Ohms for Vdd = 3V Typical Applications The HMC77ALP3E is ideal for: Fixed Wireless and LTE/WiMAX/4G BTS & Infrastructure Repeaters and Femtocells Public Safety Radio Access Points Functional Diagram Features Noise Figure:.

More information