Features OBSOLETE. = +25 C, 50 Ohm System, Vcc= 3V
|
|
- Paul Stokes
- 5 years ago
- Views:
Transcription
1 Typical Applications Prescaler for DC to 4. GHz PLL Applications: DBS/CATV Tuners 82.11x & HiperLAN WLAN Fixed Wireless & WLL Microwave & VSAT Radios Cellular & 3G Functional Diagram v.93 HMC42MS8 / 42MS8E Features Ultra Low SSB Phase Noise: -14 dbc/hz Wide Input Power Range: -15 to +1 dbm Output Power: +3.5 dbm Single DC Supply: 13 ma MS8 SMT Package General Description Electrical Specifications, T A = +25 C, 5 Ohm System, Vcc= 3V The HMC42MS8 & HMC42MS8E are low noise Divide-by-4 Static Dividers utilizing SiGe technology in 8 lead surface mount plastic packages. This device operates from DC (with a square wave input) to 4. GHz input frequency while operating from a single +3V supply at only 13 ma. The low additive SSB phase noise of -14 dbc/hz at 1 khz offset helps the user maintain excellent system noise performance. Parameter Conditions Min. Typ. Max. Units Maximum Input Frequency GHz Minimum Input Frequency Sine Wave Input. [1].2.5 GHz Input Power Range Fin =.5 to 2 GHz dbm Fin = 2 to 4 GHz dbm Output Power Fin = 1 GHz dbm Fin = 4 GHz -3 dbm Reverse Leakage 25 db SSB Phase Noise (1 khz offset) Pin = dbm, Fin = 3 GHz -14 dbc/hz Output Transition Time Pin = dbm, Fout = 5 MHz 4 ps Supply Current (Icc) 13 ma 1. Divider will operate down to DC for square-wave input signal. - One Technology Way, P.O. Box 91, Norwood, MA Phone: Order online at 2 Alpha Road, Chelmsford, MA 1824 Phone: Fax: Application Support: Phone: 1-8-ANALOG-D
2 Input Sensitivity Window, T= 25 C 2 v.93 HMC42MS8 / 42MS8E Input Sensitivity Window vs. Temperature 2 INPUT POWER (dbm) Recommended Operating Window Output Power vs. Temperature OUTPUT POWER (dbm) Output Harmonic Content, Pin= dbm, T= 25 C OUTPUT LEVEL (dbm) C +85C -4C Pfeedthru 2nd Harmonic 3rd Harmonic INPUT POWER (dbm) Min Pin +25C Max Pin +25C Min Pin +85C Max Pin +85C Min Pin -4C Max Pin -4C SSB Phase Noise Fin= 3 GHz Pin= dbm, T= 25 C SSB PHASE NOISE (dbc/hz) OFFSET FREQUENCY (Hz) Reverse Leakage, Pin= dbm, T= 25 C OUTPUT LEVEL (dbm) One Technology Way, P.O. Box 91, Norwood, MA Phone: Order online at 2 Alpha Road, Chelmsford, MA 1824 Phone: Fax: Application Support: Phone: 1-8-ANALOG-D - 1
3 v.93 Output Voltage Waveform, Pin= dbm, Fout= 5 MHz, T= 25 C HMC42MS8 / 42MS8E Input Return Loss AMPLITUDE (mv) TIME (ns) RETURN LOSS (db) One Technology Way, P.O. Box 91, Norwood, MA Phone: Order online at 2 Alpha Road, Chelmsford, MA 1824 Phone: Fax: Application Support: Phone: 1-8-ANALOG-D
4 Absolute Maximum Ratings v.93 HMC42MS8 / 42MS8E Typical Supply Current vs. Vcc RF Input (Vcc = +3V) Vcc Outline Drawing +13 dbm +3.5V Channel Temperature 15 C Continuous Pdiss (T = 85 C) (derate 7 mw/ C above 85 C) Thermal Resistance (R TH )(junction to lead) 4 mw 142 C/W Storage Temperature -5 to +15 C Operating Temperature -4 to +85 C Vcc (V) Icc (ma) Note: Divider will operate over full voltage range shown above ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating Package Marking [3] [1] H42 HMC42MS8 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 XXXX [2] H42 HMC42MS8E RoHS-compliant Low Stress Injection Molded Plastic 1% matte Sn MSL1 XXXX [1] Max peak refl ow temperature of 235 C [2] Max peak refl ow temperature of 2 C [3] 4-Digit lot number XXXX One Technology Way, P.O. Box 91, Norwood, MA Phone: Order online at 2 Alpha Road, Chelmsford, MA 1824 Phone: Fax: Application Support: Phone: 1-8-ANALOG-D - 3
5 HMC42MS8 / 42MS8E Pin Description v.93 Pin Number Function Description Interface Schematic 1 VCC Supply voltage 3V ±.3V. 2 IN RF Input must be DC blocked. 3 IN Application Circuit RF Input 18 out of phase with pin 2 for differential operation. AC ground for single ended operation. 4, 5 GND RF/DC Ground, 8 N/C No connection. 7 OUT Divided output. - 4 One Technology Way, P.O. Box 91, Norwood, MA Phone: Order online at 2 Alpha Road, Chelmsford, MA 1824 Phone: Fax: Application Support: Phone: 1-8-ANALOG-D
6 HMC42MS8 / 42MS8E Evaluation PCB v.93 List of Materials for Evaluation PCB 1722 [1] The circuit board used in the fi nal application should Item J1 - J2 J3 - J4 C1 C2 C3 - C4 C5 U1 PCB [2] Description PCB Mount SMA RF Connector DC Pin 1 pf Capacitor, 3 Pkg. 4.7 uf Tantalum Capacitor 1 pf Capacitor, 42 Pkg. 1 pf Capacitor, 42 Pkg. HMC42MS8 / HMC42MS8E Divide-by Eval Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 435 use RF circuit design techniques. Signal lines should have 5 ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. This evaluation board is designed for single ended input and output testing. One Technology Way, P.O. Box 91, Norwood, MA Phone: Order online at 2 Alpha Road, Chelmsford, MA 1824 Phone: Fax: Application Support: Phone: 1-8-ANALOG-D - 5
Features. = +25 C, 50 Ohm System, Vcc= +3V
v.1 HMC32 / 32E Typical Applications Prescaler for DC to C Band PLL Applications: UNII, Point-to-Point & VSAT Radios 82.11a & HiperLAN WLAN Fiber Optic Cellular / 3G Infrastructure Functional Diagram Features
More informationHMC437MS8G / 437MS8GE
v5.1211 HMC37MS8G / 37MS8GE Typical Applications Prescaler for DC to C Band PLL Applications: UNII, Point-to-Point & VSAT Radios 82.11a & HiperLAN WLAN Fiber Optic Cellular / 3G Infrastructure Functional
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK Typical Applications Prescaler for
More informationFeatures. = +25 C, 50 Ohm System, Vcc= +5V
v5.1211 Typical Applications Prescaler for DC to 18 GHz PLL Applications: Point-to-Point / Multi-Point Radios VSAT Radios Fiber Optic Test Equipment Military Functional Diagram Features Ultra Low ssb Phase
More informationv Features = +25 C, 50 Ohm System, Vcc = 5V
Typical Applications Prescaler for DC to X band PLL applications: Satellite communication systems Fiber optic Point-to-point and point-to-multi-point radios VSAT Functional Diagram Features Ultra low SSB
More informationAnalog Devices Welcomes Hittite Microwave Corporation
Analog Devices Welcomes Hittite Microwave Corporation www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v5.121 HMC32 / 32E Typical Applications Prescaler for DC to C band PLL applications:
More informationFeatures. = +25 C, 50 Ohm System, Vcc = 5V. Parameter Conditions Min. Typ. Max. Units. Maximum Input Frequency GHz
v2.1 DIVIDE-BY-, DC - 13 GHz Typical Applications Prescaler for DC to Ku Band PLL Applications: Point-to-Point / Multi-Point Radios VSAT Radios Fiber Optic Test Equipment Space & Military Functional Diagram
More informationFeatures. = +25 C, Vcc= 5V
v4.21 Typical Applications Active Multiplier for X Band Applications: Fiber Optic Point-to-Point Radios Military Radar Functional Diagram Features Output Power: +4 dbm Sub-Harmonic Suppression: >2 dbc
More informationHMC368LP4 / 368LP4E FREQ. MULTIPLIERS - ACTIVE - SMT. SMT GaAs PHEMT MMIC AMP-DOUBLER-AMP, 9-16 GHz OUTPUT. Typical Applications.
v3.5 Typical Applications Microwave Radios & VSAT Fiber Optic Infrastructure Military Communications & Radar Functional Diagram Features Output Power: +15 dbm Wide Input Power Range: to +1 dbm 1 khz SSB
More informationHMC471MS8G / 471MS8GE. Features OBSOLETE. DC GHz GHz GHz GHz GHz
v1.65 Typical Applications The HMC471MSG / HMC471MSGE is a dual RF/IF gain block & LO or PA driver: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment Functional
More informationFeatures. = +25 C, Vdd = +5V, 5 dbm Drive Level
v1.4 Typical Applications The HMC561LP3E are suitable for: Clock Generation Applications: SONET OC-192 & SDH STM-64 Point-to-Point & VSAT Radios Test Instrumentation Military & Space Functional Diagram
More informationFeatures. = +25 C, 50 Ohm System, Vcc= 5V
v1.71 HMC6S8G DIVIDE-BY-8, DC - 12. GHz Typical Applications Prescaler for DC to X Band PLL Applications: Satellite Communication Systems Fiber Optic Pt-Pt and Pt-MPt Radios VSAT Functional Diagram Features
More informationFeatures OBSOLETE. = +25 C, Vcc= 5V [1]
v.41 Typical Applications The is Ideal for: Microwave Radio & VSAT Military Radios, Radar & ECM Test Instrumentation Functional Diagram Electrical Specifications, T A = + C, Vcc= V [1] Features Output
More informationHMC695LP4 / HMC695LP4E
v.1 Typical Applications The HMC95LP(E) is ideal for: Fiber Optic Applications Point-to-Point Radios Military Radar Functional Diagram Features Output Power: +7 dbm Sub-Harmonic Suppression: >5 dbc SSB
More informationFeatures OBSOLETE. = +25 C, Vdd = +3.3 Vdc, 50 Ohm System
Typical Applications v1.1 ATTENUATOR,.4-2.2 GHz Features The HMC473MS8 / HMC473MS8E is ideal for: Cellular, UMTS/3G Infrastructure Portable Wireless GPS Functional Diagram RoHS Compliant Product Single
More informationFeatures. = +25 C, Vcc(RF), Vcc(DIG) = +5V
& DIVIDE-BY-16, 23. - 26. GHz Typical Applications The HMC739LP4(E) is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios / LMDS VSAT Features Pout: + dbm Phase Noise: -93 dbc/hz @ 100 khz Typ.
More informationTEL: FAX: HMC3LP / 3LPE v.21 SMT GaAs HBT MMIC x ACTIVE FREQUENCY MULTIPLIER, GHz OUTPUT Evalua
TEL:755-83396822 FAX:755-83376182 E-MAIL: szss2@163.com HMC3LP / 3LPE v.21 SMT GaAs HBT MMIC x ACTIVE FREQUENCY MULTIPLIER, 9.8-11.2 GHz OUTPUT Pin Description Pin Number Function Description Interface
More informationFeatures OBSOLETE. = +25 C, Vcc1 = Vcc2 = +5V
v3.121.1-15 GHz LOW NOISE PROGRAMMABLE DIVIDER (N = 1, 2,, 8) Typical Applications The is ideal for: Satellite Communication Systems Point-to-Point & Point-to-Multi-Point Radios Military Applications Test
More informationFeatures. = +25 C, 50 Ohm System, Vcc= 5V
Typical Applications Prescaler for 1 MHz to 13 GHz PLL Applications: Point-to-Point / Multi-Point Radios VSAT Radios Fiber Optic Test Equipment Space & Military Functional Diagram Features Ultra Low ssb
More informationFeatures. = +25 C, Vcc = +3V
Typical Applications Low noise MMIC VCO w/buffer Amplifi er for: VSAT & Microwave Radio Test Equipment & Industrial Controls Military Features Pout: +dbm Phase Noise: -106 dbc/hz @100 khz No External Resonator
More informationFeatures OBSOLETE. = +25 C, 50 Ohm System GHz degrees Insertion Loss 6-15 GHz 8 11 db. Return Loss (Input and Output) 6-15 GHz 7 db
v2.29 6 ANALOG PHASE SHIFTER, 1 Typical Applications The HMC538LP4 / HMC538LP4E is ideal for: Fiber Optics Military Test Equipment Functional Diagram Features Electrical Specifications, T A = +25 C, 5
More informationFeatures OBSOLETE. = +25 C, as a function of Vdd. Vdd = +3V Vdd = +5V Vdd = +5V Vdd = +5V Parameter
v5.117 HMC3 / 3E GENERAL PURPOSE 1 mw GaAs MMIC AMPLIFIER,. - 3. GHz Typical Applications Broadband or Narrow Band Applications: Cellular/PCS/3G Fixed Wireless & Telematics Cable Modem Termination Systems
More informationHMC346MS8G / 346MS8GE
Typical Applications v7.18 Features This attenuator is ideal for use as a VVA for DC - 8 GHz applications: Point-to-Point Radio VSAT Radio Functional Diagram Wide Bandwidth: DC - 8 GHz Low Phase Shift
More informationFeatures. = +25 C, Vdd = +5 Vdc, 50 Ohm System
v4.19 Typical Applications The HMC174MS8(E) is ideal for: Infrastructure & Repeaters Cellular/3G & WiMAX Portable Wireless LNA Protection Automotive Telematics Test Equipment Features Low Insertion Loss:.5
More informationFeatures. = +25 C, Vcc = +3V
Typical Applications Low noise MMIC VCO w/buffer Amplifi er for: Wireless Local Loop (WLL) VSAT & Microwave Radio Test Equipment & Industrial Controls Military Features Pout: +4.9 dbm Phase Noise: -3 dbc/hz
More informationFeatures. = +25 C, Vdd= +3V. Parameter Min. Typ. Max. Units Frequency Range GHz Gain db
7 Typical Applications The HMC286 / HMC286E is ideal for: BlueTooth Home RF 82.11 WLAN Radios PCMCIA Platforms Functional Diagram v3.41 Features 2.4 GHz LNA Noise Figure: 1.7 db Gain: 19 db Single Supply:
More informationFeatures. Output Power: 2 dbm Typical Spurious Suppression: >20 dbc SSB Phase Noise: khz Offset Test Instrumentation
Typical Applications The is Ideal for: Microwave Radio & VSAT Military Radios, Radar & ECM Features Output Power: dbm Typical Spurious Suppression: > dbc SSB Phase Noise: -148 dbc/hz @ 1 khz Offset Test
More informationFeatures OBSOLETE. = +25 C, Vdd = +3V to +5V & Vctl = 0/Vdd (Unless Otherwise Stated) Parameter Frequency Min. Typical Max. Units
Typical Applications The HMC288MS8 / HMC288MS8E is ideal for: Cellular PCS, ISM, MMDS WLL applications Functional Diagram 2 LSB GaAs MMIC 3-BIT DIGITAL ATTENUATOR,.7-3.7 GHz Features 2 LSB Steps to 14
More informationHMC358MS8G / 358MS8GE
Typical Applications Low noise MMIC VCO w/buffer Amplifi er for C-Band applications such as: UNII & Pt. to Pt. Radios 802.a & HiperLAN WLAN VSAT Radios Features Pout: + dbm Phase Noise: -0 dbc/hz @100
More informationHMC705LP4 / HMC705LP4E
Typical Applications Features The HMC75LP4(E) is ideal for: Satellite Communication Systems Point-to-Point Radios Military Applications Sonet Clock Generation Test Equipment Functional Diagram Ultra Low
More informationHMC705LP4 / HMC705LP4E
HMC75LP4 / HMC75LP4E v4.212 Typical Applications Features The HMC75LP4(E) is ideal for: Satellite Communication Systems Point-to-Point Radios Military Applications Sonet Clock Generation Test Equipment
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK Typical Applications The HMC440QS16G(E)
More informationFeatures. = +25 C, Vcc = +8V
v2.19 HMC5LP3 / 5LP3E Typical Applications The HMC5LP3(E) is ideal for: Wireless Infrastructure HPA & MCPA Error Correction Pre-Distortion or Feed-Forward Linearization PCS, GSM and W-CDMA Systems Beam
More informationFeatures. = +25 C, Vctl = 0/+5 Vdc, 50 Ohm System RF1 / RF2 RF1 / RF2. trise, tfall (10/90% RF) ton, toff (50% CTL to 10/90% RF)
HMC194MS8 / 194MS8E Typical Applications The HMC194MS8 /HMC194MS8E is ideal for: Cellular/PCS Base Stations Portable Wireless MMDS & WirelessLAN Features Ultra Small Package: MSOP8 High Isolation: 5 Positive
More informationHMC480ST89 / 480ST89E
v2.7 HMCST9 / ST9E Typical Applications The HMCST9 / HMCST9E is an ideal RF/IF gain block & LO or PA driver for: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test
More informationFeatures OBSOLETE. DC GHz GHz GHz GHz GHz
v2.71 HMC75ST9 / 75ST9E Typical Applications The HMC75ST9 / HMC75ST9E is an ideal RF/IF gain block & LO or PA driver: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio &
More informationHMC320MS8G / 320MS8GE. Features OBSOLETE. = +25 C, Vdd = +3V
Typical Applications The HMCMSG(E) is ideal for: UNII HiperLAN Functional Diagram v. Electrical Specifications, T A = + C, Vdd = +V HMCMSG / MSGE Features General Description Selectable Functionality:
More informationHMC310MS8G / 310MS8GE. Features OBSOLETE. = +25 C, Vdd = +3V
Typical Applications Transmit & Receive Switch for 2. GHz Applications: Bluetooth HomeRF WLAN Radios Functional Diagram v3.67 Electrical Specifications, T A = +25 C, Vdd = +3V HMC31MSG / 31MSGE Features
More informationFeatures. = +25 C, Vcc1, Vcc2, Vcc3 = +5V. Parameter Min. Typ. Max. Units Frequency Range GHz
Typical Applications Low noise MMIC VCO w/divide-by-16 for: VSAT Radio Point to Point/Multipoint Radio Test Equipment & Industrial Controls Military End-Use Automotive Radar Features Pout: + dbm Phase
More informationHMC478SC70 / 478SC70E v
HMC47SC7 / 47SC7E v2.14 Typical Applications The HMC47SC7(E) is an ideal for: Cellular / PCS / 3G WiBro / WiMAX / 4G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment Functional
More informationFeatures. = +25 C, Vdd = +3V to +5V & Vctl = 0/Vdd (Unless Otherwise Stated)
Typical Applications Functional Diagram v1.7 The HMC288MS8 / HMC288MS8E is ideal for: Cellular PCS, ISM, MMDS WLL applications HMC288MS8 / 288MS8E 2 LSB GaAs MMIC 3-BIT DIGITAL ATTENUATOR,.7-3.7 GHz Features
More informationHMC589ST89 / 589ST89E. Features OBSOLETE. DC GHz GHz GHz. db Gain 22
v.71 HMC59ST9 / 59ST9E Typical Applications The HMC59ST9 / HMC59ST9E is ideal for: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment IF & RF Applications
More informationHMC600LP4 / 600LP4E POWER DETECTORS - SMT. 75 db LOGARITHMIC DETECTOR / CONTROLLER MHz. Features. Typical Applications. General Description
v.99 HMC6LP4 / 6LP4E 7 db LOGARITHMIC DETECTOR / CONTROLLER - 4 MHz Typical Applications The HMC6LP4 / HMC6LP4E is ideal for IF and RF applications in: Cellular/PCS/G WiMAX, WiBro & Fixed Wireless Power
More informationFeatures
HMC37SC7E v1.1.3-3. GHz Typical Applications The HMC37SC7E is ideal for: Cellular/PCS/3G WCS, mmds & ism Fixed Wireless & WLAN Private Land Mobile Radio Functional Diagram Features Single Supply: Vdd =
More informationFrequency vs. Tuning Voltage, Vcc = +4.2V 17 Frequency vs. Tuning Voltage, T= 25 C FREQUENCY (GHz) FREQUENCY (GHz) Vcc = 4.
Typical Applications The HMC736LP4(E) is ideal for: Point to Point/Multipoint Radio Test Equipment & Industrial Controls SATCOM Military End-Use Functional Diagram Features Dual Output: Fo = Fo/2 = 7.25-7.5
More informationHMC948LP3E POWER DETECTORS - SMT. 54 db, LOGARITHMIC DETECTOR, 1-23 GHz. Typical Applications. Features. Functional Diagram. General Description
v.9 HMC948LPE DETECTOR, - GHz Typical Applications The HMC948LPE is ideal for: Point-to-Point Microwave Radio VSAT Wideband Power Monitoring Receiver Signal Strength Indication (RSSI) Test & Measurement
More informationOBSOLETE. Parameter Frequency (GHz) Min. Typ. Max. Units DC GHz GHz. Attenuation Range DC - 3 GHz 31 db
5 Typical Applications The HMC47LP3(E) is ideal for: Cellular; UMTS/3G Infrastructure ISM, MMDS, WLAN, WiMAX Microwave Radio & VSAT Test Equipment and Sensors Functional Diagram HMC47LP3 / 47LP3E v4.118
More information= +25 C, Vcc = +3.3V, Z o = 50Ω (Continued)
v1.1 HMC9LP3E Typical Applications The HMC9LP3E is ideal for: LO Generation with Low Noise Floor Software Defined Radios Clock Generators Fast Switching Synthesizers Military Applications Test Equipment
More informationFeatures. = +25 C, 50 Ohm System, Vcc= 5V
Typical Applications Programmable divider for offset synthesizer and variable divide by N applications: Satellite Communication Systems Point-to-Point and Point-to-Multi-Point Radios LMDS SONET Functional
More informationHMC326MS8G / 326MS8GE
v9.511 AMPLIFIER, 3. - 4.5 GHz Typical Applications The HMC326MS8G / HMC326MS8GE is ideal for: Microwave Radios Broadband Radio Systems Wireless Local Loop Driver Amplifier Functional Diagram Features
More informationFeatures. = +25 C, Vcc = +5V. Parameter Min. Typ. Max. Units Fo Fo/2 RFOUT RFOUT/2
v4.11 HMC5LP5 / 5LP5E OUTPUT 7.3 -.2 GHz Typical Applications Low noise MMIC VCO w/half Frequency, for: VSAT Radio Point to Point/Multi-Point Radio Test Equipment & Industrial Controls Military End-Use
More informationHMC662LP3E POWER DETECTORS - SMT. 54 db, LOGARITHMIC DETECTOR, 8-30 GHz. Typical Applications. Features. Functional Diagram. General Description
Typical Applications The is ideal for: Point-to-Point Microwave Radio VSAT Wideband Power Monitoring Receiver Signal Strength Indication (RSSI) Test & Measurement Functional Diagram Features Wide Input
More informationOBSOLETE HMC915LP4E. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram. General Description
v1.5 LO AMPLIFIER,.5-2.7 GHz Typical Applications The is ideal for: PCS / 3G Infrastructure Base Stations & Repeaters WiMAX & WiBro ISM & Fixed Wireless Functional Diagram Features Input IP3: +28 dbm Low
More informationFeatures. = +25 C, Vcc1, Vcc2 = +5V. Parameter Min. Typ. Max. Units Fo Fo/2 RFOUT RFOUT/2 RFOUT/4
v4.11 Typical Applications Low noise MMIC VCO w/half Frequency, Divide-by-4 Outputs for: VSAT Radio Point to Point/Multipoint Radio Test Equipment & Industrial Controls Military End-Use Functional Diagram
More informationFeatures OBSOLETE. = +25 C, Vcc1, Vcc2 = +5.0V. Parameter Min. Typ. Max. Units Frequency Range GHz. Divided Output
v3.81 Typical Applications Low noise MMIC VCO w/divide-by-8 for Ku-Band applications such as: Point-to-Point Radios Point-to-Multi-Point Radios / LMDS VSAT Functional Diagram Features Electrical Specifications,
More informationHMC601LP4 / 601LP4E POWER DETECTORS - SMT. 75 db, FAST SETTLING, LOGARITHMIC DETECTOR / CONTROLLER MHz. Typical Applications.
v.9 HMC6LP4 / 6LP4E 7 db, FAST SETTLING, LOGARITHMIC DETECTOR / CONTROLLER - 4 MHz Typical Applications The HMC6LP4(E) is ideal for IF and RF applications in: Cellular/PCS/G WiMAX, WiBro & Fixed Wireless
More informationFeatures. = +25 C, Vss= -5V, Vdd= +5V, Control Voltage= 0/ +5V, 50 Ohm System. Frequency Range GHz Insertion Loss* 4 6.
v1.28 HMC647LP6 / 647LP6E Typical Applications The HMC647LP6(E) is ideal for: EW Receivers Weather & Military Radar Satellite Communications Beamforming Modules Phase Cancellation Functional Diagram Features
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v3.1211 45 Analog Phase Shifter,
More informationFeatures OBSOLETE. LO Port Return Loss db RF Port Return Loss db
v4.18 MODULATOR RFIC, - 4 MHz Typical Applications The HMC497LP4(E) is ideal for: UMTS, GSM or CDMA Basestations Fixed Wireless or WLL ISM Transceivers, 9 & 24 MHz GMSK, QPSK, QAM, SSB Modulators Functional
More informationHMC602LP4 / 602LP4E POWER DETECTORS - SMT. 70 db, LOGARITHMIC DETECTOR / CONTROLLER, MHz
v3.9 HMC6LP / 6LPE 7 db, LOGARITHMIC DETECTOR / CONTROLLER, 1-8 MHz 1 Typical Applications The HMC6LP(E) is ideal for IF and RF applications in: Cellular/PCS/3G WiMAX, WiBro, WLAN, Fixed Wireless & Radar
More informationHMC580ST89 / 580ST89E. Features OBSOLETE. DC GHz GHz GHz. db db db Gain Variation Over Temperature DC GHz 0.
v.71 HMC5ST9 / 5ST9E Typical Applications The HMC5ST9 / HMC5ST9E is ideal forr: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment IF & RF Applications Functional
More informationHMC639ST89 / 639ST89E
Typical Applications The HMC39ST9(E) is ideal for: Cellular / PCS / 3G WiMAX, WiBro, & Fixed Wireless CATV & Cable Modem Microwave Radio IF and RF Sections Functional Diagram Electrical Specifications,
More informationFeatures OBSOLETE. Parameter Min. Typ. Max. Units. Frequency Range GHz Insertion Loss 5 7 db. Input Return Loss 16 db
v1.611 Typical Applications The is ideal for: EW Receivers Weather & Military Radar Satellite Communications Beamforming Modules Phase Cancellation Functional Diagram Features Low RMS Phase Error: 1.2
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC476SC7 / 476SC7E v4.814 Typical
More informationFeatures. OUT Intercept dbm Variation of OUT with Temperature from -40 C to dbm Input
v.1 DETECTOR / CONTROLLER, 5-7 MHz Typical Applications The HMC713MS8(E) is ideal for: Cellular Infrastructure WiMAX, WiBro & LTE/G Power Monitoring & Control Circuitry Receiver Signal Strength Indication
More informationHMC486LP5 / 486LP5E LINEAR & POWER AMPLIFIERS - SMT. SURFACE MOUNT PHEMT 2 WATT POWER AMPLIFIER, 7-9 GHz. Typical Applications.
v2. Typical Applications The HMC486LP5(E) is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment and Sensors Military End-Use Features Saturated Power: +33 dbm @ 2% PAE Output IP3:
More informationHMC612LP4 / 612LP4E v
HMC6LP4 / 6LP4E v.8 DETECTOR / CONTROLLER, 5 Hz - MHz Typical Applications Features The HMC6LP4(E) is ideal for IF and RF applications in: Cellular/PCS/G WiMAX, WiBro, WLAN, Fixed Wireless & Radar Power
More informationFrequency vs. Tuning Voltage, Vcc = +5V OUTPUT FREQUENCY (GHz) Frequency vs. Tuning Voltage, T= 25 C OUTPUT F
Typical Applications The HMC734LP5(E) is ideal for: Point-to-Point/Multi-Point Radio Test Equipment & Industrial Controls SATCOM Military End-Use Functional Diagram Features Dual Output: Fo = Fo/4 = 2.15-2.55
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK Typical Applications Transmit & Receive
More informationParameter Frequency (GHz) Min. Typ. Max. Units DC GHz GHz GHz GHz Attenuation Range DC - 5.
5 Typical Applications HMC54LP3 / 54LP3E v.65 1 LSB GaAs MMIC 4-BIT DIGITAL Features The HMC54LP3 / HMC54LP3E is ideal for both RF and IF applications: Cellular Infrastructure ISM, MMDS, WLAN, WiMAX, WiBro
More informationOBSOLETE. Parameter Frequency (GHz) Min. Typ. Max. Units DC GHz GHz GHz Attenuation Range DC - 5.
5 Typical Applications HMC54LP3 / 54LP3E v.65 1 LSB GaAs MMIC 4-BIT DIGITAL Features The HMC54LP3 / HMC54LP3E is ideal for both RF and IF applications: Cellular Infrastructure ISM, MMDS, WLAN, WiMAX, WiBro
More informationFeatures. = +25 C, Vcc1 = Vcc2 = 5V, Zo = 75 Ohm [1]
HMC754SGE v.49 Typical Applications The HMC754SGE is ideal for: CATV / Broadband Infrastructure Test & Measurement Equipment Line Amps and Fiber Nodes Customer Premise Equipment Functional Diagram Output
More informationFeatures. = +25 C, Vcc (Dig), Vcc (Amp), Vcc (RF) = +5V. Parameter Min. Typ. Max. Units Fo Fo/4 RFOUT RFOUT/4
.6-10.2 GHz Typical Applications The HMC734LP5(E) is ideal for: Point-to-Point/Multi-Point Radio Test Equipment & Industrial Controls SATCOM Military End-Use Functional Diagram Features Dual Output: Fo
More informationFeatures. = +25 C, Vcc1, Vcc2 = +3V. Parameter Min. Typ. Max. Units Fo Fo/2 RFOUT RFOUT/2 RFOUT/4
v4.11 Typical Applications Low noise MMIC VCO w/half Frequency, Divide-by-4 Outputs for: VSAT Radio Point to Point/Multipoint Radio Test Equipment & Industrial Controls Military End-Use Functional Diagram
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v2.65 HMC455LP3 / 455LP3E Typical
More informationFeatures OBSOLETE. Isolation DC GHz db
Typical Applications Features - 224 The is ideal for: Cellular / 4G Infrastructure WiMAX, WiBro & Fixed Wireless Automotive Telematics Mobile Radio Test Equipment Functional Diagram Input P1dB: + @ Vdd
More informationFeatures OBSOLETE. Saturated Output Power (Psat) dbm Output Third Order Intercept (IP3) dbm Supply Current (Idd) ma
7 Typical Applications The HMC667LP2(E) is ideal for: WiMAX, WiBro & Fixed Wireless SDARS & WLAN Receivers Infrastructure & Repeaters Access Points Telematics & DMB Functional Diagram v2.11 Electrical
More informationFeatures. = +25 C, Vcc = +5V, Z o = 50Ω, Bias1 = GND
v1.612 Typical Applications The is ideal for: LO Generation with Low Noise Floor Clock Generators Mixer LO Drive Military Applications Test Equipment Sensors Functional Diagram Features Low Noise Floor:
More informationFeatures. Parameter Frequency Min. Typ. Max. Units Insertion Loss DC GHz db. DC GHz
v1.11 HMC55 / 55E Typical Applications The HMC55 / HMC55E is ideal for: RFID & Electronic Toll Collection (etc) Tags, Handsets & Portables ISM, WLAN, WiMAX & WiBro Automotive Telematics Test Equipment
More information7 GHz INTEGER N SYNTHESIZER CONTINUOUS (N = ), NON-CONTINUOUS (N = 16-54) Features
HMC99LP5 / 99LP5E CONTINUOUS (N = 5-519), NON-CONTINUOUS (N = 1-54) Typical Applications The HMC99LP5(E) is ideal for: Satellite Communication Systems Point-to-Point Radios Military Applications Sonet
More informationFeatures. = +25 C, Vcc (Dig), Vcc (Amp), Vcc (RF) = +5V. Parameter Min. Typ. Max. Units Fo Fo/2 RFOUT RFOUT/2 RFOUT/4
HMC54LP5 / 54LP5E Typical Applications Low noise MMIC VCO w/half Frequency, Divide-by-4 Outputs for: Point to Point/Multipoint Radio Test Equipment & Industrial Controls SATCOM Military End-Use Functional
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v2.49 Typical Applications The HMC536LP2(E)
More informationFeatures. = +25 C, Vdd = +5V, Rbias = 10 Ohms*
Typical Applications Functional Diagram The HMC36LP3 / HMC36LP3E is ideal for: Cellular/3G Infrastructure Base Stations & Repeaters CDMA, W-CDMA, & TD-SCDMA Private Land Mobile Radio GSM/GPRS & EDGE UHF
More informationFeatures OBSOLETE. = +25 C, Vctl = 0/+8 Vdc, 50 Ohm System. Parameter Frequency* Min. Typ. Max. Units Tx - RFC MHz db.
GaAs MMIC 1W T/R Typical Applications Features 1 The HMC446 / HMC446E is ideal for: ISM/Cellular Portables/Handsets Automotive Telematic Applications Mobile Radio Functional Diagram Low Insertion Loss:.6
More informationTEL: FAX: v.117 HMC3 / 3E GENERAL PURPOSE 1 mw GaAs MMIC AMPLIFIER, GHz Broadband Gain & Return Vdd =
TEL:7-339622 FAX:7-337612 E-MAIL: szss@3.com v.117 HMC3 / 3E GENERAL PURPOSE 1 mw GaAs MMIC AMPLIFIER,. - 3. GHz Typical Applications Broadband or Narrow Band Applications: Cellular/PCS/3G Fixed Wireless
More informationHMC639ST89 / 639ST89E
v3.1 HMC63ST / 63STE AMPLIFIER,.2-4. GHz Typical Applications The HMC63ST(E) is ideal for: Cellular / PCS / 3G WiMAX, WiBro, & Fixed Wireless CATV & Cable Modem Microwave Radio IF and RF Sections Features
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v3.38 POWER AMPLIFIER, 2-2 GHz Typical
More informationHMC602LP4 / 602LP4E POWER DETECTORS - SMT. 70 db, LOGARITHMIC DETECTOR / CONTROLLER, MHz
v3.9 HMC6LP / 6LPE 7 db, LOGARITHMIC DETECTOR / CONTROLLER, 1-8 MHz 1 Typical Applications The HMC6LP(E) is ideal for IF and RF applications in: Cellular/PCS/3G WiMAX, WiBro, WLAN, Fixed Wireless & Radar
More informationHMC1013LP4E. SDLVAs - SMT. SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA), GHz
v.9 HMCLPE AMPLIFIER (SDLVA),.5-8.5 GHz Typical Applications The HMCLPE is ideal for: EW, ELINT & IFM Receivers DF Radar Systems ECM Systems Broadband Test & Measurement Power Measurement & Control Circuits
More informationFeatures. Parameter Frequency Min. Typ. Max. Units Insertion Loss DC GHz db
v.1212 HMC55A / 55AE Typical Applications The HMC55A / HMC55AE is ideal for: RFID & Electronic Toll Collection (ETC) Tags, Handsets & Portables ISM, WLAN, WiMAX & WiBro Automotive Telematics Test Equipment
More informationFeatures. = +25 C, Vcc = +5V. Parameter Min. Typ. Max. Units Fo Fo/2 RFOUT RFOUT/2
Typical Applications Low noise MMIC VCO w/half Frequency, for: VSAT Radio Point to Point/Multi-Point Radio Test Equipment & Industrial Controls Military End-Use Functional Diagram Features Dual Output:
More informationFeatures. = +25 C, Vcc = +5V
Typical Applications Low noise wideband MMIC VCO for applications such as: Industrial/Medical Equipment Test & Measurement Equipment Military Radar, EW & ECM Functional Diagram Features Wide Tuning Bandwidth
More informationFeatures. = +25 C, Vdd = +5 Vdc, 50 Ohm System. trise, tfall (10/90% RF) ton, toff (50% CTL to 10/90% RF)
Typical Applications The HMC174MS8 / HMC174MS8E is ideal for: ISM Applications PCMCIA Wireless Cards Portable Wireless Features Ultra Small Package: MSOP8 High Third Order Intercept: +60 m Single Positive
More informationFeatures. = +25 C, Vcc (Dig), Vcc (Amp), Vcc (RF) = +5V
Typical Applications The HMC734LP5(E) is ideal for: Point-to-Point/Multi-Point Radio Test Equipment & Industrial Controls SATCOM Military End-Use Functional Diagram Features Dual Output: Fo = Fo/4 = 2.15-2.55
More informationFeatures db
v1.19 DETECTOR / CONTROLLER, 5-8 MHz Power Detectors - SMT Typical Applications The is ideal for: Cellular Infrastructure WiMAX, WiBro & LTE/G Power Monitoring & Control Circuitry Receiver Signal Strength
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK Typical Applications Low noise wideband
More informationFeatures. = +25 C, Vcc = 5V, Vpd = 5V. Parameter Min. Typ. Max. Min. Typ. Max. Units
v2.717 MMIC AMPLIFIER, 4 - GHz Typical Applications The is ideal for: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment IF & RF Applications Functional
More informationHMC245QS16 / 245QS16E. Features OBSOLETE. Parameter Frequency Min. Typ. Max. Units. DC GHz DC GHz DC GHz
Typical Applications The HMC245QS16 / HMC245QS16E is ideal for: Basestation Infrastructure CATV / DBS Wireless Local Loop Test Equipment Functional Diagram Features Low Insertion Loss:.5 @ 2. GHz Non-Refl
More informationHMC454ST89 / 454ST89E
HMC44ST8 / 44ST8E Typical Applications The HMC44ST8 / HMC44ST8E is ideal for applications requiring a high dynamic range amplifi er: GSM, GPRS & EDGE CDMA & W-CDMA CATV/Cable Modem Fixed Wireless & WLL
More informationFeatures OBSOLETE. = +25 C, With 0/+5V Control, 50 Ohm System. Parameter Frequency Min. Typ. Max. Units
v5.85 Typical Applications Features The HMC348LP3 / HMC348LP3E is ideal for: 75 Ohm Systems CATV Signal Distribution, Cable Modem Headend & DBS IF Switching 5 Ohm Systems Basestation Infrastructure & Test
More information