POSITIVE-VOLTAGE REGULATORS
|
|
|
- Constance Hensley
- 5 years ago
- Views:
Transcription
1 The µa78m10 and µa78m15 are 3-Terminal Regulators Output Current Up To 500 No External Components Internal Thermal-Overload Protection KC (TO-220) PACKAGE (TOP IEW) µa78m00 SERIES POSITIE-OLTAGE REGULATORS SLS059K JUNE 1976 REISED FEBRUARY 2003 High Power-Dissipation Capability Internal Short-Circuit Current Limiting Output Transistor Safe-Area Compensation KTP PACKAGE (TOP IEW) OUTPUT INPUT OUTPUT INPUT KCS (TO-220) PACKAGE (TOP IEW) DCY (SOT-223) PACKAGE (TOP IEW) OUTPUT INPUT OUTPUT INPUT description/ordering information This series of fixed-voltage integrated-circuit voltage regulators is designed for a wide range of applications. These applications include on-card regulation for elimination of noise and distribution problems associated with single-point regulation. Each of these regulators can deliver up to 500 of output current. The internal current-limiting and thermal-shutdown features of these regulators essentially make them immune to overload. In addition to use as fixed-voltage regulators, these devices can be used with external components to obtain adjustable output voltages and currents, and also as the power-pass element in precision regulators. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright 2003, Texas Instruments Incorporated POST OFFICE BOX DALLAS, TEXAS
2 µa78m00 SERIES POSITIE-OLTAGE REGULATORS SLS059K JUNE 1976 REISED FEBRUARY 2003 The µa78m10 and µa78m15 are ORDERING INFORMATION TJ O(NOM) () PACKAGE ORDERABLE PART NUMBER TOP-SIDE MARKING Power Flex (KTP) Reel of 3000 µa78m33cktpr UA78M33C 3.33 SOT-223 (DCY) 5 Tube of 80 Reel of 2500 µa78m33cdcy µa78m33cdcyr TO-220 (KC) Tube of 50 µa78m33ckc UA78M33C Power Flex (KTP) Reel of 3000 µa78m05cktpr UA78M05C SOT-223 (DCY) Tube of 80 Reel of 2500 µa78m05cdcy µa78m05cdcyr TO-220 (KC) Tube of 50 µa78m05ckc 0 C to 125 C TO-220, short shoulder (KCS) Tube of 20 µa78m05ckcs C3 C5 UA78M05C 6 Power Flex (KTP) Reel of 3000 µa78m06cktpr UA78M06C Power Flex (KTP) Reel of 3000 µa78m08cktpr UA78M08C 8 SOT-223 (DCY) Tube of 80 Reel of 2500 µa78m08cdcy µa78m08cdcyr TO-220 (KC) Tube of 50 µa78m08ckc UA78M08C 9 Power Flex (KTP) Reel of 3000 µa78m09cktpr UA78M09C 12 Power Flex (KTP) Reel of 3000 µa78m12cktpr UA78M12C TO-220 (KC) Tube of 50 µa78m12ckc UA78M12C Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at C8 2 POST OFFICE BOX DALLAS, TEXAS 75265
3 The µa78m10 and µa78m15 are µa78m00 SERIES POSITIE-OLTAGE REGULATORS SLS059K JUNE 1976 REISED FEBRUARY 2003 schematic INPUT 140 kω 96 Ω 0.6 Ω 0 to 20 kω OUTPUT 5.4 kω Resistor values shown are nominal. POST OFFICE BOX DALLAS, TEXAS
4 µa78m00 SERIES POSITIE-OLTAGE REGULATORS SLS059K JUNE 1976 REISED FEBRUARY 2003 The µa78m10 and µa78m15 are absolute maximum ratings over virtual junction temperature range Input voltage, I Package thermal impedance, θ JA (see Notes 1 and 2): DCY package C/W (see Notes 1 and 3): KC/KCS package C/W (see Notes 1 and 3): KTP package C/W Operating virtual junction temperature, T J C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds C Storage temperature range, T stg C to 150 C Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. Maximum power dissipation is a function of TJ(max), θ JA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) TA)/θ JA. Selecting the maximum of 150 C can affect reliability. 2. The package thermal impedance is calculated in accordance with JESD The package thermal impedance is calculated in accordance with JESD recommended operating conditions I Input voltage MIN MAX µa78m µa78m µa78m µa78m µa78m µa78m µa78m µa78m IO Output current 500 TJ Operating virtual junction temperature C 4 POST OFFICE BOX DALLAS, TEXAS 75265
5 The µa78m10 and µa78m15 are µa78m00 SERIES POSITIE-OLTAGE REGULATORS SLS059K JUNE 1976 REISED FEBRUARY 2003 electrical characteristics at specified virtual junction temperature, I = 8, I O = 350, T J = 25 C µa78m33c t IO = 5 to 350, Output voltage I = 8 to 20 TJ = 0 C to 125 C IO = 200 I = 5.3 to I = 8 to I = 8 to 18, IO = 100, TJ = 0 C to 125 C 62 Ripple rejection f = 120 Hz IO = Output voltage regulation I = 8, IO = 5 to Temperature coefficient of output voltage IO = 5, TJ = 0 C to 125 C 1 / C Output noise voltage f = 10 Hz to 100 khz µ Dropout voltage 2 Bias current IO = 200, I = 8 to 25, TJ = 0 C to 125 C 0.8 IO = 5 to 350, TJ = 0 C to 125 C 0.5 Short-circuit output current I = Peak output current 700 This specification applies only for dc power dissipation permitted by absolute maximum ratings. electrical characteristics at specified virtual junction temperature, I = 10, I O = 350, T J = 25 C Output t voltage µa78m05c IO = 5 to 350, I = 7 to 20 TJ = 0 C to 125 C IO = 200 I = 7 to I = 8 to I = 8 to 18, IO = 100, TJ = 0 C to 125 C 62 Ripple rejection f = 120 Hz IO = Output voltage regulation IO = 5 to IO = 5 to Temperature coefficient of output voltage IO = 5, TJ = 0 C to 125 C 1 / C Output noise voltage f = 10 Hz to 100 khz µ Dropout voltage 2 Bias current IO = 200, I = 8 to 25, TJ = 0 C to 125 C 0.8 IO = 5 to 350, TJ = 0 C to 125 C 0.5 Short-circuit output current I = Peak output current 0.7 A POST OFFICE BOX DALLAS, TEXAS
6 µa78m00 SERIES POSITIE-OLTAGE REGULATORS SLS059K JUNE 1976 REISED FEBRUARY 2003 The µa78m10 and µa78m15 are electrical characteristics at specified virtual junction temperature, I = 11, I O = 350, T J = 25 C Output t voltage IO =5to350, I =8to21 IO = 200 Ripple rejection I = 9 to 19, f = 120 Hz Output voltage regulation Temperature coefficient of output voltage µa78m06c TJ = 0 C to 125 C I = 8 to I = 9 to IO = 100, TJ = 0 C to 125 C 59 IO = IO = 5 to IO = 5 to IO = 5, TJ = 0 C to 125 C 1 / C Output noise voltage f = 10 Hz to 100 khz 45 µ Dropout voltage 2 Bias current I = 9 to 25, IO = 200, TJ = 0 C to 125 C 0.8 IO = 5 to 350, TJ = 0 C to 125 C 0.5 Short-circuit output current I = Peak output current 0.7 A electrical characteristics at specified virtual junction temperature, I = 14, I O = 350, T J = 25 C Output t voltage I =105to , IO =5to350 IO = 200 µa78m08c TJ = 0 C to 125 C I = 10.5 to I = 11 to I = 11.5 to 21.5, IO = 100, TJ = 0 C to 125 C 56 Ripple rejection f = 120 Hz IO = Output voltage regulation Temperature coefficient of output voltage IO = 5 to IO = 5 to IO = 5, TJ = 0 C to 125 C 1 / C Output noise voltage f = 10 Hz to 100 khz 52 µ Dropout voltage 2 Bias current I = 10.5 to 25, IO = 200, TJ = 0 C to 125 C 0.8 IO = 5 to 350, TJ = 0 C to 125 C 0.5 Short-circuit output current I = Peak output current 0.7 A 6 POST OFFICE BOX DALLAS, TEXAS 75265
7 The µa78m10 and µa78m15 are µa78m00 SERIES POSITIE-OLTAGE REGULATORS SLS059K JUNE 1976 REISED FEBRUARY 2003 electrical characteristics at specified virtual junction temperature, I = 16,I O = 350, T J = 25 C Output t voltage I =115to , IO =5to350 IO = 200 µa78m09c TJ = 0 C to 125 C I = 11.5 to I = 12 to I = 13 to 23, IO = 100, TJ = 0 C to 125 C 56 Ripple rejection f = 120 Hz IO = Output voltage regulation Temperature coefficient of output voltage IO = 5 to IO = 5 to IO = 5, TJ = 0 C to 125 C 1 / C Output noise voltage f = 10 Hz to 100 khz 58 µ Dropout voltage 2 Bias current I = 11.5 to 26, IO = 200, TJ = 0 C to 125 C 0.8 IO = 5 to 350, TJ = 0 C to 125 C 0.5 Short-circuit output current I = Peak output current 0.7 A electrical characteristics at specified virtual junction temperature, I = 17, I O = 350, T J = 25 C Output t voltage I = 12.5 to 25, IO = 5 to 350 IO = 200 µa78m10c TJ = 0 C to 125 C I = 12.5 to I = 14 to I = 15 to 25, IO = 100, TJ = 0 C to 125 C 59 Ripple rejection f = 120 Hz IO = Output voltage regulation Temperature coefficient of output voltage IO = 5 to IO = 5 to IO = 5, TJ = 0 C to 125 C 1 / C Output noise voltage f = 10 Hz to 100 khz 64 µ Dropout voltage 2 Bias current I = 12.5 to 28, IO = 200, TJ = 0 C to 125 C 0.8 IO = 5 to 350, TJ = 0 C to 125 C 0.5 Short-circuit output current I = Peak output current 0.7 A POST OFFICE BOX DALLAS, TEXAS
8 µa78m00 SERIES POSITIE-OLTAGE REGULATORS SLS059K JUNE 1976 REISED FEBRUARY 2003 The µa78m10 and µa78m15 are electrical characteristics at specified virtual junction temperature, I = 19, I O = 350, T J = 25 C Output t voltage I =145to , IO =5to350 IO = 200 µa78m12c TJ = 0 C to 125 C I = 14.5 to I = 16 to I = 15 to 25, IO = 100, TJ = 0 C to 125 C 55 Ripple rejection f = 120 Hz IO = Output voltage regulation Temperature coefficient of output voltage IO = 5 to IO = 5 to IO = 5 1 / C Output noise voltage f = 10 Hz to 100 khz 75 µ Dropout voltage 2 Bias current I = 14.5 to 30, IO = 200, TJ = 0 C to 125 C 0.8 IO = 5 to 350, TJ = 0 C to 125 C 0.5 Short-circuit output current I = Peak output current 0.7 A electrical characteristics at specified virtual junction temperature, I = 23, I O = 350, T J = 25 C Output t voltage I =175to , IO =5to350 IO = 200 µa78m15c TJ = 0 C to 125 C I = 17.5 to I = 20 to I = 18.5 to 28.5, IO = 100, TJ = 0 C to 125 C 54 Ripple rejection f = 120 Hz IO = Output voltage regulation Temperature coefficient of output voltage IO = 5 to IO = 5 to IO = 5, TJ = 0 C to 125 C 1 / C Output noise voltage f = 10 Hz to 100 khz 90 µ Dropout voltage 2 Bias current I = 17.5 to 30, IO = 200, TJ = 0 C to 125 C 0.8 IO = 5 to 350, TJ = 0 C to 125 C 0.5 Short-circuit output current I = Peak output current 0.7 A 8 POST OFFICE BOX DALLAS, TEXAS 75265
9 MECHANICAL DATA MPDS094A APRIL 2001 REISED JUNE 2002 DCY (R-PDSO-G4) PLASTIC SMALL-OUTLINE 6,70 (0.264) 6,30 (0.248) 4 3,10 (0.122) 2,90 (0.114) 0,10 (0.004) M 7,30 (0.287) 3,70 (0.146) 6,70 (0.264) 3,30 (0.130) Gauge Plane 2,30 (0.091) ,60 (0.181) 0,84 (0.033) 0,66 (0.026) 0,10 (0.004) M ,25 (0.010) 0,75 (0.030) MIN 1,80 (0.071) MAX 1,70 (0.067) 1,50 (0.059) 0,35 (0.014) 0,23 (0.009) Seating Plane 0,10 (0.0040) 0,02 (0.0008) 0,08 (0.003) /B 06/2002 NOTES: A. All linear dimensions are in millimeters (inches). B. This drawing is subject to change without notice. C. Body dimensions do not include mold flash or protrusion. D. Falls within JEDEC TO-261 ariation AA. POST OFFICE BOX DALLAS, TEXAS
10 MECHANICAL DATA MPSF001F JANUARY 1996 REISED JANUARY 2002 KTP (R-PSFM-G2) PowerFLEX PLASTIC FLANGE-MOUNT PACKAGE (6,17) (5,91) (5,79) (5,54) (2,03) (1,78) (1,27) (1,02) (3,30) NOM (0,25) NOM (9,68) (9,42) (5,46) NOM (6,27) (6,02) (7,29) (7,03) Thermal Tab (See Note C) (2,54) (2,29) (0,81) MAX Seating Plane (2,29) (4,57) (0,79) (0,63) (0,25) M (0,13) (0,02) (0,10) (0,25) NOM Gage Plane (1,19) (0,94) (0,25) /M 01/02 NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. The center lead is in electrical contact with the thermal tab. D. Dimensions do not include mold protrusions, not to exceed (0,15). E. Falls within JEDEC TO-252 variation AC. PowerFLEX is a trademark of Texas Instruments. POST OFFICE BOX DALLAS, TEXAS
11 MPSF017A - OCTOBER REISED FEBRUARY 2003
12 MECHANICAL DATA MSOT007A JANUARY 1995 REISED SEPTEMBER 1995 KC (R-PSFM-T3) PLASTIC FLANGE-MOUNT PACKAGE (3,96) (3,71) DIA (10,67) (9,65) (see Note H) (3,05) (2,54) (4,70) (4,46) (1,32) (1,22) (6,86) (5,84) (see Note H) (15,88) (14,22) (see Note F) (3,18) (see Note C) (6,35) MAX (14,27) (12,70) (0,89) (0,74) (0,25) M (1,78) (1,14) (2,54) (5,08) (3,10) (2,59) (0,64) (0,30) / B 01/95 NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. Lead dimensions are not controlled within this area. D. All lead dimensions apply before solder dip. E. The center lead is in electrical contact with the mounting tab. F. The chamfer is optional. G. Falls within JEDEC TO-220AB H. Tab contour optional within these dimensions POST OFFICE BOX DALLAS, TEXAS
13 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Mailing Address: Texas Instruments Post Office Box Dallas, Texas Copyright 2003, Texas Instruments Incorporated
14 This datasheet has been download from: Datasheets for electronics components.
µa78m00 SERIES POSITIVE-VOLTAGE REGULATORS
The µa78m15 is obsolete and 3-Terminal Regulators Output Current Up To 500 No External Components Internal Thermal-Overload Protection KC (TO-220) PACKAGE (TOP IEW) µa78m00 SERIES POSITIE-OLTAGE REGULATORS
LM317 3-TERMINAL ADJUSTABLE REGULATOR
3-TERMINAL ABLE REGULATOR Output Voltage Range Adjustable From 1.25 V to 37 V Output Current Greater Than 1.5 A Internal Short-Circuit Current Limiting Thermal Overload Protection Output Safe-Area Compensation
TL750L, TL751L SERIES LOW-DROPOUT VOLTAGE REGULATORS
TL70L, TL7L SERIES LOW-DROPOUT OLTAGE REGULATORS SLS07P SEPTEMBER 987 REISED FEBRUARY 2003 ery Low Dropout oltage, Less Than 0.6 at 0 ma ery Low Quiescent Current TTL- and CMOS-Compatible Enable on TL7L
POSITIVE-VOLTAGE REGULATORS
www.ti.com FEATURES µa78m00 SERIES POSITIVE-VOLTAGE REGULATORS SLVS059P JUNE 1976 REVISED OCTOBER 2005 3-Terminal Regulators High Power-Dissipation Capability Output Current up to 500 ma Internal Short-Circuit
POSITIVE-VOLTAGE REGULATORS
SLVS010N JANUARY 1976 REVISED NOVEMBER 2001 3-Terminal Regulators Current up to 100 No External Components Internal Thermal-Overload Protection Internal Short-Circuit Current Limiting Direct Replacements
TL317 3-TERMINAL ADJUSTABLE REGULATOR
Voltage Range Adjustable From 1.2 V to 32 V When Used With an External Resistor Divider Current Capability of 100 ma Input Regulation Typically 0.01% Per Input-Voltage Change Regulation Typically 0.5%
LM317M 3-TERMINAL ADJUSTABLE REGULATOR
FEATURES Output Voltage Range Adjustable From 1.25 V to 37 V Output Current Greater Than 5 ma Internal Short-Circuit Current Limiting Thermal-Overload Protection Output Safe-Area Compensation Q Devices
TL780 SERIES POSITIVE-VOLTAGE REGULATORS
±1% Output Tolerance at ±2% Output Tolerance Over Full Operating Range Thermal Shutdown description Internal Short-Circuit Current Limiting Pinout Identical to µa7800 Series Improved Version of µa7800
OUTPUT INPUT ADJUSTMENT INPUT INPUT ADJUSTMENT INPUT
www.ti.com FEATURES LM237, LM337 3-TERMINAL ADJUSTABLE REGULATORS SLVS047I NOVEMBER 1981 REVISED OCTOBER 2006 Output Voltage Range Adjustable From Peak Output Current Constant Over 1.2 V to 37 V Temperature
TL494 PULSE-WIDTH-MODULATION CONTROL CIRCUITS
Complete PWM Power-Control Circuitry Uncommitted Outputs for 200-mA Sink or Source Current Output Control Selects Single-Ended or Push-Pull Operation Internal Circuitry Prohibits Double Pulse at Either
LM158, LM158A, LM258, LM258A LM358, LM358A, LM2904, LM2904Q DUAL OPERATIONAL AMPLIFIERS
Wide Range of Supply oltages: Single Supply...3 to 30 (LM2904 and LM2904Q...3 to 26 ) or Dual Supplies Low Supply-Current Drain Independent of Supply oltage... 0.7 Typ Common-Mode Input oltage Range Includes
1OE 3B V GND ORDERING INFORMATION. TOP-SIDE MARKING QFN RGY Tape and reel SN74CBTLV3126RGYR CL126 PACKAGE
SN74CBTLV326 LOW-VOLTAGE QUADRUPLE FET BUS SWITCH SCDS03H DECEMBER 997 REVISED APRIL 2003 Standard 26-Type Pinout 5-Ω Switch Connection Between Two Ports Isolation Under Power-Off Conditions Latch-up Performance
ORDERING INFORMATION PACKAGE
Operates From.65 V to 3.6 V Inputs Accept Voltages to 5.5 V Max t pd of 4.8 ns at 3.3 V Typical V OLP (Output Ground Bounce) 2
TL750M, TL751M SERIES LOW-DROPOUT VOLTAGE REGULATORS
ery Low Dropout oltage, Less Than.6 at 75 ma Low Quiescent Current TTL- and CMOS-Compatible Enable on TL751M Series 6- Load-Dump Protection Overvoltage Protection Internal Thermal Overload Protection Internal
TL FIXED-VOLTAGE REGULATORS FOR SCSI ACTIVE TERMINATION
Fully Matches Parameters for SCSI Alternative 2 Active Termination Fixed 2.85-V Output ±1.5% Maximum Output Tolerance at T J = 25 C 1-V Maximum Dropout Voltage 500-mA Output Current ±3% Absolute Output
AM26LS31 QUADRUPLE DIFFERENTIAL LINE DRIVER
AM6LS SLLSG JANUARY 979 REVISED FEBRUARY Meets or Exceeds the Requirements of ANSI TIA/EIA--B and ITU Recommendation V. Operates From a Single -V Supply TTL Compatible Complementary Outputs High Output
LM317 3-TERMINAL ADJUSTABLE REGULATOR
www.ti.com FEATURES 3-TERMINAL ABLE REGULATOR Output Voltage Range Adjustable From 1.25 V Thermal Overload Protection to 37 V Output Safe-Area Compensation Output Current Greater Than 1.5 A Internal Short-Circuit
description/ordering information
1.5 V, 1.8 V, 2.5 V, 2.85 V, 3.3 V, 5 V, and Adjustable Output Voltage Options Output Current of 800 ma Operates Down to 1.1-V Dropout DCY (SOT-223) PACKAGE (TOP VIEW) DRJ (QFN) PACKAGE (TOP VIEW) Specified
TL-SCSI285 FIXED-VOLTAGE REGULATORS FOR SCSI ACTIVE TERMINATION
Fully Matches Parameters for SCSI Alternative 2 Active Termination Fixed 2.85-V Output ±1% Maximum Output Tolerance at T J = 25 C 0.7-V Maximum Dropout Voltage 620-mA Output Current ±2% Absolute Output
THS6092, THS ma, +12 V ADSL CPE LINE DRIVERS
Remote Terminal ADSL Line Driver Ideal for Both Full Rate ADSL and G.Lite Compatible With 1:2 Transformer Ratio Wide Supply Voltage Range 5 V to 14 V Ideal for Single Supply 12-V Operation Low 2.1 pa/
description/ordering information
µ SLVS060K JUNE 1976 REVISED APRIL 2005 3-Terminal Regulators Output Current Up To 500 ma No External Components High Power-Dissipation Capability Internal Short-Circuit Current Limiting Output Transistor
description/ordering information
µ SLVS060K JUNE 1976 REVISED APRIL 2005 3-Terminal Regulators Output Current Up To 500 ma No External Components High Power-Dissipation Capability Internal Short-Circuit Current Limiting Output Transistor
MC3486 QUADRUPLE DIFFERENTIAL LINE RECEIVER WITH 3-STATE OUTPUTS
Meets or Exceeds the Requirements of ANSI Standards EIA/TIA-422-B and EIA/TIA-423-B and ITU Recommendations V.10 and V.11 3-State, TTL-Compatible s Fast Transition Times Operates From Single 5-V Supply
50ppm/ C, 50µA in SOT23-3 CMOS VOLTAGE REFERENCE
REF312 REF32 REF325 REF333 REF34 MARCH 22 REVISED MARCH 23 5ppm/ C, 5µA in SOT23-3 CMOS VOLTAGE REFERENCE FEATURES MicroSIZE PACKAGE: SOT23-3 LOW DROPOUT: 1mV HIGH OUTPUT CURRENT: 25mA LOW TEMPERATURE
TL594 PULSE-WIDTH-MODULATION CONTROL CIRCUIT
Complete PWM Power Control Circuitry Uncommitted Outputs for 200-mA Sink or Source Current Output Control Selects Single-Ended or Push-Pull Operation Internal Circuitry Prohibits Double Pulse at Either
CD74HCT4514, CD74HCT LINE TO 16-LINE DECODERS/DEMULTIPLEXERS WITH INPUT LATCHES
4.5-V to 5.5-V V CC Operation Fanout (Over Temperature Range) Standard s... 0 LSTTL Loads Bus-Driver s... 5 LSTTL Loads Wide Operating Temperature Range of 55 C to 25 C Balanced Propagation Delays and
EN: This Datasheet is presented by the m anufacturer. Please v isit our website for pricing and availability at ore.hu.
EN: This Datasheet is presented by the m anufacturer. Please v isit our website for pricing and availability at www.hest ore.hu. Convert TTL Voltage Levels to MOS Levels High Sink-Current Capability Clamping
CD4066B CMOS QUAD BILATERAL SWITCH
5-V Digital or ±7.5-V Peak-to-Peak Switching 5-Ω Typical On-State Resistance for 5-V Operation Switch On-State Resistance Matched to Within 5 Ω Over 5-V Signal-Input Range On-State Resistance Flat Over
CD54ACT74, CD74ACT74 DUAL POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH CLEAR AND PRESET
s Are TTL-Voltage ompatible Speed of Bipolar F, AS, and S, With Significantly Reduced Power onsumption Balanced Propagation Delays ±24-mA Drive urrent Fanout to 5 F Devices SR-Latchup-Resistant MOS Process
ULN2001A, ULN2002A, ULN2003A, ULN2004A, ULQ2003A, ULQ2004A, HIGH-VOLTAGE HIGH-CURRENT DARLINGTON TRANSISTOR ARRAY
The ULNA is obsolete -ma Rated Collector Current (Single ) High-oltage s... Clamp Diodes ULNA, ULNA, ULNA, ULNA, ULQA, ULQA, SLRSC DECEMBER REISED MAY Inputs Compatible With arious Types of Logic Relay
TL783 HIGH-VOLTAGE ADJUSTABLE REGULATOR
HIGH-VOLTAGE USTABLE REGULATOR Output Adjustable From 1.25 V to 125 V When Used With an External Resistor Divider 7-mA Output Current Full Short-Circuit, Safe-Operating-Area, and Thermal-Shutdown Protection.1%/V
LM124, LM124A, LM224, LM224A LM324, LM324A, LM2902 QUADRUPLE OPERATIONAL AMPLIFIERS
Wide Range of Supply Voltages: Single Supply...3 V to 30 V (LM2902 3 V to 26 V) or Dual Supplies Low Supply Drain Independent of Supply Voltage... 0.8 Typ Common-Mode Input Voltage Range Includes Ground
SN5404, SN54LS04, SN54S04, SN7404, SN74LS04, SN74S04 HEX INVERTERS
Dependable Texas Instruments Quality and Reliability description These devices contain six independent inverters. SN5404, SN54LS04, SN54S04, SN5404... J PACKAGE SN54LS04, SN54S04... J OR W PACKAGE SN7404...
TL598 PULSE-WIDTH-MODULATION CONTROL CIRCUITS
Complete PWM Power Control Function Totem-Pole Outputs for 200-mA Sink or Source Current Output Control Selects Parallel or Push-Pull Operation Internal Circuitry Prohibits Double Pulse at Either Output
TL431, TL431A ADJUSTABLE PRECISION SHUNT REGULATORS
Equivalent Full-Range Temperature Coefficient... 30 ppm/ C 0.2-Ω Typical Output Impedance Sink-Current Capability...1 ma to 100 ma Low Output Noise Adjustable Output Voltage...V ref to 36 V Available in
SN65LVDM31 HIGH-SPEED DIFFERENTIAL LINE DRIVER
HIH-SPEED DIFFERENTIAL LINE DRIVER Designed for Signaling Rates Up to 5 Mbps Low-Voltage Differential Signaling With Typical Output Voltage of 7 mv and a -Ω Load Propagation Delay Time of. ns, Typical
L293, L293D QUADRUPLE HALF-H DRIVERS
Featuring Unitrode L and LD Products Now From Texas Instruments Wide Supply-Voltage Range:.5 V to V Separate Input-Logic Supply Internal ESD Protection Thermal Shutdown High-Noise-Immunity Inputs Functional
SN75150 DUAL LINE DRIVER
Meets or Exceeds the Requirement of TIA/EIA-232-F and ITU Recommendation V.28 Withstands Sustained Output Short Circuit to Any Low-Impedance Voltage Between 25 V and 25 V 2-µs Maximum Transition Time Through
ULN2001A, ULN2002A, ULN2003A, ULN2004A, ULQ2003A, ULQ2004A HIGH-VOLTAGE HIGH-CURRENT DARLINGTON TRANSISTOR ARRAY
The ULN2A is obsolete 5-mA-Rated Collector Current (Single ) High-Voltage s... 5 V Clamp Diodes ULN2A, ULN22A, ULN23A, ULN24A, ULQ23A, ULQ24A SLRS2F DECEMBER 96 REVISED FEBRUARY 23 Inputs Compatible With
SN54LS245, SN74LS245 OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS
3-State s Drive Bus Lines Directly PNP s Reduce dc Loading on Bus Lines Hysteresis at Bus s Improves Noise Margins Typical Propagation Delay Times Port to Port, 8 ns TYPE IOL (SINK CURRENT) IOH (SOURCE
MAX232, MAX232I DUAL EIA-232 DRIVER/RECEIVER
Operates With Single 5-V Power Supply LinBiCMOS Process Technology Two Drivers and Two Receivers ± 30-V Input Levels Low Supply Current...8 ma Typical Meets or Exceeds TIA/EIA-232-F and ITU Recommendation
TPS7415, TPS7418, TPS7425, TPS7430, TPS7433 FAST-TRANSIENT-RESPONSE USING SMALL OUTPUT CAPACITOR 200-mA LOW-DROPOUT VOLTAGE REGULATORS
Fast Transient Response Using Small Output Capacitor ( µf) 2-mA Low-Dropout Voltage Regulator Available in.5-v,.8-v, 2.5-V, 3-V and 3.3-V Dropout Voltage Down to 7 mv at 2 ma () 3% Tolerance Over Specified
TL431, TL431A ADJUSTABLE PRECISION SHUNT REGULATORS
Equivalent Full-Range Temperature Coefficient... 0 ppm/ C 0.-Ω Typical Output Impedance Sink-Current Capability...1 ma to 100 ma Low Output Noise Adjustable Output Voltage...V ref to 6 V Available in a
TL1431 PRECISION PROGRAMMABLE REFERENCE
PRECISION PROGRAMMABLE REFEREE 0.4% Initial Voltage Tolerance 0.2-Ω Typical Output Impedance Fast Turnon... 500 ns Sink Current Capability...1 ma to 100 ma Low Reference Current (REF) Adjustable Output
ORDERING INFORMATION PACKAGE
Member of Texas Instruments Widebus Family State-of-the-Art Advanced Low-Voltage BiCMOS (ALB) Technology Design for.-v Operation Schottky Diodes on All s to Eliminate Overshoot and Undershoot Industry
NE555, SA555, SE555 PRECISION TIMERS
Timing From Microseconds to Hours Astable or Monostable Operation Adjustable Duty Cycle TTL-Compatible Output Can Sink or Source up to 00 ma Designed To Be Interchangeable With Signetics NE, SA, and SE
NE5532, NE5532A DUAL LOW-NOISE OPERATIONAL AMPLIFIERS
Equivalent Input Noise Voltage 5 nv/ Hz Typ at 1 khz Unity-Gain Bandwidth... 10 MHz Typ Common-Mode Rejection Ratio... 100 db Typ High dc Voltage Gain... 100 V/mV Typ Peak-to-Peak Output Voltage Swing
ORDERING INFORMATION PACKAGE SOT (SC-70) DCK
Operating Range of 2 V to 5.5 V Max t pd of 10 at 5 V Low Power Coumption, 10-µ Max I CC ±8-m Drive at 5 V Latch-Up Performance Exceeds 250 m Per JESD 17 description/ordering information DBV OR DCK PCKGE
CD54/74HC540, CD74HCT540, CD54/74HC541, CD54/74HCT541
CD54/74HC540, CD74HCT540, CD54/74HC541, CD54/74HCT541 Data sheet acquired from Harris Semiconductor SCHS189C January 1998 - Revised July 2004 High-Speed CMOS Logic Octal Buffer and Line Drivers, Three-State
SN54HC00, SN74HC00 QUADRUPLE 2-INPUT POSITIVE-NAND GATES
SN54HC00, SN74HC00 QUADRUPLE 2-INPUT POSITIVE-NAND GATES SCLS181E DECEMBER 1982 REVISED AUGUST 2003 Wide Operating Voltage Range of 2 V to 6 V Outputs Can Drive Up To 10 LSTTL Loads Low Power Consumption,
description/ordering information
Meets or Exceeds TIA/EIA-232-F and ITU Recommendation V.28 Operates From a Single 5-V Power Supply With 1.0-F Charge-Pump Capacitors Operates Up To 120 kbit/s Two Drivers and Two Receivers ±30-V Input
Distributed by: www.jameco.com 1-800-81-4242 The content and copyrights of the attached material are the property of its owner. Operating Range 2-V to.-v V CC Latch-Up Performance Exceeds 20 ma Per JESD
CD54AC74, CD74AC74 DUAL POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH CLEAR AND PRESET
A Types Feature 1.5-V to 5.5-V Operation and Balanced Noise Immunity at 30% of the Supply Speed of Bipolar F, AS, and S, With Significantly Reduced Power oumption Balanced Propagation Delays ±24-mA Output
TCM1030, TCM1050 DUAL TRANSIENT-VOLTAGE SUPPRESSORS
Meet or Exceed Bell Standard LSSGR Requirements Externally-Controlled Negative Firing Voltage... 90 V Max Accurately Controlled, Wide Negative Firing Voltage Range... V to V Positive Surge Current (see
TPIC0107B PWM CONTROL INTELLIGENT H-BRIDGE
TPIC7B SLIS67A NOVEMBER 998 REVISED APRIL 22 Dedicated PWM Input Port Optimized for Reversible Operation of Motors Two Input Control Lines for Reduced Microcontroller Overhead Internal Current Shutdown
ORDERING INFORMATION PACKAGE
Member of Texas Instruments Widebus Family Latch-Up Performance Exceeds 250 ma Per JESD 17 description This 16-bit (dual-octal) noninverting bus transceiver contains two separate supply rails; B port has
SN54AHC573, SN74AHC573 OCTAL TRANSPARENT D-TYPE LATCHES WITH 3-STATE OUTPUTS
Operating Range 2-V to 5.5-V V CC 3-State s Directly Drive Bus Lines Latch-Up Performance Exceeds 250 ma Per JESD 17 description The AHC573 devices are octal traparent D-type latches designed for 2-V to
description 1G 1A1 2Y4 1A2 2Y3 1A3 2Y2 1A4 2Y1 GND V CC 2G/2G 1Y1 2A4 1Y2 2A3 1Y3 2A2 1Y4 2A1 1Y1 2A4 1Y2 2A3 1Y3 1A2 2Y3 1A3 2Y2 1A4 2A2 2G/2G 2Y1
SN54LS240, SN54LS241, SN54LS244, SN54S240, SN54S241, SN54S244 3-State s Drive Bus Lines or Buffer Memory Address Registers PNP s Reduce DC Loading Hysteresis at s Improves Noise Margins description These
SN74LVC1G06 SINGLE INVERTER BUFFER/DRIVER WITH OPEN-DRAIN OUTPUT
and Open-Drain Accept Voltages up to 5.5 V Supports 5-V V CC Operation description This single inverter buffer/driver is designed for 1.65-V to 5.5-V V CC operation. DBV OR DCK PACKAGE (TOP VIEW) NC A
SN74AHC1G04 SINGLE INVERTER GATE
Operating Range 2-V to 5.5-V V CC Latch-Up Performance Exceeds 250 m Per JESD 17 description The SN74HC1G04 contai one inverter gate. The device performs the Boolean function =. DBV OR DCK PCKGES (TOP
TL594 PULSE-WIDTH-MODULATION CONTROL CIRCUITS
Complete PWM Power Control Circuitry Uncommitted Outputs for 200-mA Sink or Source Current Output Control Selects Single-Ended or Push-Pull Operation Internal Circuitry Prohibits Double Pulse at Either
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Operating Range 2-V to 5.5-V V CC 3-State s Drive Bus Lines Directly Latch-Up
High-Side Measurement CURRENT SHUNT MONITOR
INA39 INA69 www.ti.com High-Side Measurement CURRENT SHUNT MONITOR FEATURES COMPLETE UNIPOLAR HIGH-SIDE CURRENT MEASUREMENT CIRCUIT WIDE SUPPLY AND COMMON-MODE RANGE INA39:.7V to 40V INA69:.7V to 60V INDEPENDENT
SN54AHCT174, SN74AHCT174 HEX D-TYPE FLIP-FLOPS WITH CLEAR
Inputs Are TTL-Voltage Compatible Contain Six Flip-Flops With Single-Rail s Applicatio Include: Buffer/Storage Registers Shift Registers Pattern Generators Latch-Up Performance Exceeds 250 ma Per JESD
SN54HC541, SN74HC541 OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS
Wide Operating Voltage Range of 2 V to 6 V High-Current 3-State Outputs Drive Bus Lines Directly or Up To 15 LSTTL Loads Low Power Consumption, 80-µA Max I CC Typical t pd = 10 ns ±6-mA Output Drive at
CDC337 CLOCK DRIVER WITH 3-STATE OUTPUTS
Low Output Skew, Low Pulse Skew for Clock-Distribution and Clock-Generation Applications TTL-Compatible Inputs and CMOS-Compatible Outputs Distributes One Clock Input to Eight Outputs Four Same-Frequency
1.5 C Accurate Digital Temperature Sensor with SPI Interface
TMP TMP SBOS7B JUNE 00 REVISED SEPTEMBER 00. C Accurate Digital Temperature Sensor with SPI Interface FEATURES DIGITAL OUTPUT: SPI-Compatible Interface RELUTION: -Bit + Sign, 0.0 C ACCURACY: ±. C from
description/ordering information
µ SLVS010S JANUARY 1976 REVISED FEBRUARY 2004 3-Terminal Regulators Current Up To 100 No External Components Internal Thermal-Overload Protection Internal Short-Circuit Current Limiting description/ordering
SN74LVC2244ADWR OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS. description/ordering information
Operates From 1.65 V to 3.6 V Inputs Accept Voltages to 5.5 V Max t pd of 5.5 ns at 3.3 V Output Ports Have Equivalent 26-Ω Series Resistors, So No External Resistors Are Required Typical V OLP (Output
description/ordering information
Member of the Texas Instruments Widebus Family Max t pd of 5.8 ns at 3.3 ±24-mA Drive at 3.3 Latch-Up Performance Exceeds 250 ma Per JESD 17 description/ordering information This 16-bit (dual-octal) noninverting
SN54LV4052A, SN74LV4052A DUAL 4-CHANNEL ANALOG MULTIPLEXERS/DEMULTIPLEXERS
2-V to 5.5-V V CC Operation Support Mixed-Mode Voltage Operation on All Ports Fast Switching High On-Off Output-Voltage Ratio Low Crosstalk Between Switches Extremely Low Input Current Latch-Up Performance
UC284x, UC384x, UC384xY CURRENT-MODE PWM CONTROLLERS
Optimized for Off-Line and dc-to-dc Converters Low Start-Up Current (
Current Mode PWM Controller
application INFO available UC1842/3/4/5 Current Mode PWM Controller FEATURES Optimized For Off-line And DC To DC Converters Low Start Up Current (
description/ordering information
3-Terminal Regulators Output Current Up To 100 ma No External Components Required Internal Thermal-Overload Protection Internal Short-Circuit Current Limiting Direct Replacement for Industry-Standard MC79L00
SN54HC126, SN74HC126 QUADRUPLE BUS BUFFER GATES WITH 3-STATE OUTPUTS
SN54HC26, SN74HC26 QUADRUPLE BUS BUFFER GATES WITH 3-STATE OUTPUTS SCLS03E MARCH 94 REVISED JULY 2003 Wide Operating Voltage Range of 2 V to 6 V High-Current 3-State Outputs Interface Directly With System
MC1458, MC1558 DUAL GENERAL-PURPOSE OPERATIONAL AMPLIFIERS
Short-Circuit Protection Wide Common-Mode and Differential oltage Ranges No Frequency Compensation Required Low Power Consumption No Latch-Up Designed to Be Interchangeable With Motorola MC/MC and Signetics
LM325 LM325 Dual Voltage Regulator
LM325 LM325 Dual Voltage Regulator Literature Number: SNOSBS9 LM325 Dual Voltage Regulator General Description This dual polarity tracking regulator is designed to provide balanced positive and negative
ORDERING INFORMATION PACKAGE
Member of Texas Instruments Widebus Family Latch-Up Performance Exceeds 250 ma Per JESD 17 ESD Protection Exceeds JESD 22 2000-V Human-Body Model (A114-A) 200-V Machine Model (A115-A) Bus Hold on Data
SN54HC00, SN74HC00 QUADRUPLE 2-INPUT POSITIVE-NAND GATES
Package Options Include Plastic Small-Outline (D), Thin Shrink Small-Outline (PW), and Ceramic Flat (W) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 00-mil DIPs description
NE556, SA556, SE556, SE556C DUAL PRECISION TIMERS
Two Precision Timing Circuits per Package Astable or Monostable Operation TTL-Compatible Output Can Sink or Source Up to 50 ma Active Pullup or Pulldown Designed to be Interchangeable With Signetics SE556,
SN54HC245, SN74HC245 OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS
High-Current -State s Drive Bus Lines Directly or up to LSTTL Loads Package Options Include Plastic Small-Outline (DW), Shrink Small-Outline (DB), Thin Shrink Small-Outline (PW), and Ceramic Flat (W) Packages,
description NC/FB PG GND EN OUT OUT IN IN D PACKAGE (TOP VIEW) TPS76533 DROPOUT VOLTAGE vs FREE-AIR TEMPERATURE
TPS76515, TPS76518, TPS76525, TPS76527 150-mA Low-Dropout Voltage Regulator Available in 1.5-V, 1.8-V, 2.5-V, 2.7-V, 2.8-V, 3.0-V, 3.3-V, 5.0-V Fixed Output and Adjustable Versions Dropout Voltage to 85
PRECISION VOLTAGE REGULATORS
SLVS057B AUGUST 1972 RESED AUGUST 1995 150-mA Load Current Without External Power Transistor Typically 0.02% Input Regulation and 0.03% Load Regulation (µa723m) Adjustable Current Limiting Capability Input
SN65176B, SN75176B DIFFERENTIAL BUS TRANSCEIVERS
Bidirectional Transceivers Meet or Exceed the Requirements of ANSI Standards TIA/EIA--B and TIA/EIA-8-A and ITU Recommendations V. and X.7 Designed for Multipoint Transmission on Long Bus Lines in Noisy
SN54HC132, SN74HC132 QUADRUPLE POSITIVE-NAND GATES WITH SCHMITT-TRIGGER INPUTS
Operation From Very Slow Input Transitions Temperature-Compensated Threshold Levels High Noise Immunity Same Pinouts as HC00 Package Options Include Plastic Small-Outline (D), Shrink Small-Outline (DB),
IMPORTANT NOTICE Texas Instruments (TI) reserves the right to make changes to its products or to discontinue any semiconductor product or service without notice, and advises its customers to obtain the
TLC x8 BIT LED DRIVER/CONTROLLER
Drive Capability: Segment... ma 16 Bits Common... 6 ma Constant Current Output...3 ma to ma (Current Value Setting for All Channels Using External Resistor) Constant Current Accuracy ±6% (Maximum Error
MAX211 5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH ±15-kV ESD PROTECTION
ESD Protection for RS-232 Bus Pins ±5 kv, Human-Body Model Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 Standards Operates at 5-V V CC Supply Four Drivers and Five Receivers Operates
SN QUADRUPLE HALF-H DRIVER
-A -Current Capability Per Driver Applications Include Half-H and Full-H Solenoid Drivers and Motor Drivers Designed for Positive-Supply Applications Wide Supply-Voltage Range of 4.5 V to 6 V TTL- and
TPA6110A2 150-mW STEREO AUDIO POWER AMPLIFIER
TPA6A2 5-mW STEREO AUDIO POWER AMPLIFIER SLOS34 DECEMBER 2 5 mw Stereo Output PC Power Supply Compatible Fully Specified for 3.3 V and 5 V Operation Operation to 2.5 V Pop Reduction Circuitry Internal
TL780 SERIES POSITIVE-VOLTAGE REGULATORS
FEATURES TL780 SERIES POSITIVE-VOLTAGE REGULATORS SLVS055M APRIL 1981 REVISED OCTOBER 2006 ±1% Output Tolerance at 25 C Internal Short-Circuit Current Limiting ±2% Output Tolerance Over Full Operating
SN54HC175, SN74HC175 QUADRUPLE D-TYPE FLIP-FLOPS WITH CLEAR
Contain Four Flip-Flops With Double-Rail Outputs Applications Include: Buffer/Storage Registers Shift Registers Pattern Generators Package Options Include Plastic Small-Outline (D), Thin Shrink Small-Outline
description/ordering information
Output Adjustable From.25 V to 25 V When Used With an External Resistor Divider 7-mA Output Current Full Short-Circuit, Safe-Operating-Area, and Thermal-Shutdown Protection.%/V Typical Input Voltage Regulation.5%
ORDERING INFORMATION TOP-SIDE
SCES JULY Control Inputs V IH /V IL Levels are Referenced to V CCA Voltage V CC Isolation Feature If Either V CC Input Is at, Both Ports Are in the High-Impedance State Overvoltage-Tolerant Inputs/Outputs
ua9637ac DUAL DIFFERENTIAL LINE RECEIVER
ua967ac Meets or Exceeds the Requirements of ANSI Standards EIA/TIA--B and EIA/TIA--B and ITU Recommendations V. and V. Operates From Single -V Power Supply Wide Common-Mode Voltage Range High Input Impedance
SN54LVC14A, SN74LVC14A HEX SCHMITT-TRIGGER INVERTERS
Typical V OLP ( Ground Bounce) 2 V at V CC = 3.3 V, T A = 25 C s Accept Voltages to 5.5 V Latch-Up Performance Exceeds 100 ma Per JESD
description GND/HSINK GND/HSINK NC NC RESET FB/NC OUT OUT GND/HSINK GND/HSINK GND/HSINK GND/HSINK GND NC EN IN IN NC GND/HSINK GND/HSINK GND EN IN IN
TPS7675Q, TPS7678Q, TPS76725Q, TPS76727Q A Low-Dropout Voltage Regulator Available in.5-v,.8-v, 2.5-V, 2.7-V, 2.8-V, 3.-V, 3.3-V, 5.-V Fixed Output and Adjustable Versions Dropout Voltage Down to 23 mv
SN54HC377, SN74HC377 OCTAL D-TYPE FLIP-FLOPS WITH CLOCK ENABLE
Eight Flip-Flops With Single-Rail Outputs Clock Enable Latched to Avoid False Clocking Applications Include: Buffer/Storage Registers Shift Registers Pattern Generators Package Options Include Plastic
CD54AC74, CD74AC74 DUAL POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH CLEAR AND PRESET
A Types Feature.5-V to 5.5-V Operation and Balanced Noise Immunity at 30% of the Supply Speed of Bipolar F, AS, and S, With Significantly Reduced Power oumption Balanced Propagation Delays ±24-mA Output
SN54HC365, SN74HC365 HEX BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS
High-Current -State s Drive Bus Lines, Buffer Memory Address Registers, or Drive up to LSTTL Loads True s Package Options Include Plastic Small-Outline (D) and Ceramic Flat (W) Packages, Ceramic Chip Carriers