GC9901-GG9944. Microsemi Microwave Products 75 Technology Drive, Lowell, MA , , Fax:

Transcription

1 DECRIPTION chottky Barrier devices are currently available in single beamlead, dual T, ring quad and bridge quad configurations. Devices are available in monolithic form for hybrid applications as well as in hermetic or non-hermetic packages. Monolithic devices are recommended for highest frequency, broadband designs. The beamlead design eliminates the problems associated with wire bonding very small junction devices thus improving reliability and performance in MIC applications. Our in house epitaxy process capability insures repeatability for lowest conversion loss through Ku Band. A broad range of unique metallization schemes produce s complete line of barrier heights. Diodes are currently available with barrier heights as low as 240 mv and up to 625 mv per junction. By optimizing epitaxy and metallization, these devices achieve the lowest R -C J products resulting in exceptional conversion loss performance. High Rel screening is available on packaged devices per your requirements. This series of devices meets RoH requirements per EU Directive 2002/95/EC. KEY FEATURE Monolithic design for lowest parasitics Low Conversion Loss uitable for applications to 26.5 GHz Excellent Noise Figure Available in low, medium and high barrier heights Can be supplied as monolithic devices for hybrid applications or as packaged devices 1 APPLICATION chottky barrier diodes are suitable for a variety of circuit applications ranging from single ended RF mixers to low level high speed switching. The monolithic beamlead design minimizes parasitic inductance and capacitance insuring repeatable performance through Ku band. ingle junction devices such as the style 12 are well suited for RF Mixers, level detectors, phase detectors, modulators, etc. With junction capacitances as low as.06 pf, Monolithic Quads are ideally suited for broadband double balanced mixer designs through 26.5 GHz. The Ultra-Low Barrier devices (GC9900 eries) are designed for mixers with low or starved Local Oscillator levels where optimal conversion loss is a must. High barrier diodes, (GC9940 eries) are designed for applications where high drive levels are available, such as, Doppler mixers or motion detection. chottky diodes are available in Ultra- Low, Medium and High Drive levels to fit virtually any circuit requirement. 1 These devices are supplied with Gold plated terminations. Consult factory for details. APPLICATION/BENEFIT Mixers Level Detectors Phase Detectors ABOLUTE MAXIMUM RATING AT 25º C 3B(UNLE OTHERWIE PECIFIED) Rating ymbol Value Unit Maximum Power Handling P 100 mw torage Temperature T TG -65 to +175 ºC Operating Temperature T OP -55 to +150 ºC IMPORTANT: For the most current data, consult our web site: HUwww.microsemi.comU pecifications are subject to change. Consult factory for latest information. These devices are ED sensitive and must be handled use using ED precautions. GC9901-GG9944 Page 1

2 . Model 1 Number CHIP ELECTRICAL 25 C (unless otherwise specified) Barrier Height Freq Range 2 V B (V) I R =10μA (Min) C J (pf) (Max) V F ma (Max) R D ma (Max) NF B (db) 4 (Typ) GC9901 Ku-Ka GC9902 ULTRA X GC9903 LOW C GC GC9911 Ku-Ka GC9912 X LOW 2.0 GC9913 C GC GC9921 Ku-Ka GC9922 LOW- X GC9923 MED C GC GC9931 Ku-Ka GC9932 X MEDIUM 3.0 GC9933 C GC GC9941 Ku-Ka GC9942 X HIGH 4.0 GC9943 C GC Z IF (Ω) 5 (Typ) Notes 1. When ordering, specify appropriate package style. IE: Order GC for single beamlead configuration. 2. V b measured at 10µA (N/A on ring quads) Volts, F=1 MHz (diagonal leads on quads). 4. L.O. = 0 dbm, Nif = 1.5 db, F = 10 GHz 5. L.O. = 0 dbm ELECTRICAL Page 2

3 VF CURVE TYPICAL NF CURVE IF(mA) Typical I-V Curves V F (V) 4 1-GC GC GC GC9942 TYPICAL IF IMPEDANCE CURVE GRAPH Page 3

4 PACKAGE TYLE UC PACKAGE TYLE 12 Order as GC9900-UC PACKAGE TYLE TR Order as GC PACKAGE TYLE TCC ORDER A GC9900-TR PACKAGE TYLE QR1 ORDER A GC9900-TCC Also available as TCA ( T Common Anode) PACKAGE TYLE QB1 ORDER A GC9900-QR1 ORDER A GC9900-QB1 DICRETE AND MONOLITHIC PACKAGE OPTION MECHANICAL Page 4

5 PACKAGE TYLE 127A PACKAGE TYLE 128A PACKAGE TYLE 127B PACKAGE TYLE 128B PACKAGE TYLE 127C PACKAGE TYLE 128C NON HERMETIC EPOXY COATED PACKAGE MECHANICAL Page 5

6 PACKAGE TYLE 129A TYLE 174B. PACKAGE TYLE 129B TYLE 174C PACKAGE TYLE 129C ORDERING INFORMATION Package style and configuration should be included when ordering 3 and 4 terminal products. Format: partnum pkg config For example: - Order a ring quad in a 128C package as: GC C-QR1 - Order a bridge quad in a 128C package as: - GC C-QB1 Consult Factory for assistance. MECHANICAL OTHER PACKAGE TYLE AVAILABLE ON REQUET Page 6