Signal Sources and Passive Products macomtech.com

Size: px
Start display at page:

Download "Signal Sources and Passive Products macomtech.com"

Transcription

1 M/A-COM Technology Solutions Signal Sources and Passive Products macomtech.com

2 Signal Sources and Passive Products Delivering comprehensive solutions for demanding applications Introduction This Signal Sources and Passives Products Selection Guide contains information about our standard products. It is intended to assist in the selection of products to ensure availability, ease of use, and optimal performance. Parts can be found quickly on our website at macomtech.com by typing the part number into the Search by Part Number box. We provide product samples, test boards and applications support. The products listed in this brochure include: Voltage controlled oscillators (VCOs) Mixers Couplers Power splitters/combiners TInductors Quality and Reliability The goal of M/A-COM Technology Solutions is to continually deliver effective, high quality products and services that meet our customers and internal operations needs in terms of delivery, performance, safety and value. Process controls are implemented such that the tasks are performed properly the first time, so that products and services meet established, agreed-to requirements. It is the personal responsibility of every employee to ensure quality, customer satisfaction, continual improvement, maintenance of our quality management system and compliance with customer and regulatory requirements. As a result of our experience in the communications industry, we have accumulated an extensive RF design library. In addition to supporting our standard products, our design and prototype assembly teams stand ready to quickly transform your custom application ideas from simulation to reality. For more information about our product offerings, and to view data sheets, go to macomtech.com

3 Signal Sources: Voltage Controlled Oscillators (VCOs) Power Tune Phase Noise (dbc/hz) Tuning Power Supply Frequency Part Output Max Voltage Offset Freq (Max) Sensitivity Typ Current Max (MHz) Number (dbm) Min-Max (V) 0 khz 00 khz (MHz/V) (ma) MAVC MAVC MAVC MAVC MAVC MAVC MAVC MAVC MAVC MAVC MAVC MAVC MAVC MAVC MAVC MAVC MAVC MAVC MAVC MAVC MAVC MAVC MAVC MAVC MAVC MAVC MAVC MAVC MAVC MAVC MAVC MAVC MAVC MAVC MAVC MAVC MAVC MAVC MAVC MAVC MAVC MAVC MAVC MAVC All packages are LSM Copyright 00, M/A-COM Technology Solutions Inc. All Rights Reserved. This brochure is provided by M/A-COM Technology Solutions as a service to its customers and may be used for informational purposes only by the customer. M/A-COM Technology Solutions assumes no responsibility for errors or omissions in the brochure. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to change any specification, designs, models and other information contained herein without notice. M/A-COM Technology Solutions makes no commitment to update the information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from future changes to its documentation, products, specifications and product descriptions.

4 Signal Sources: Low Phase Noise VCOs A selection of our latest design releases is shown below. Part Number Frequency (MHz) M/A-COM Technology Solutions surface mount hybrid VCOs support applications from 5 MHz to GHz. Whether in hand-held or vehicle-mounted radios, or base stations, our VCOs deliver leading edge solutions to challenging communications needs. In addition to these state-of- the-art VCOs, we also offer a broad range of hybrid frequency synthesizers, modules, MMIC VCOs, diodes, transistors, and passive products a comprehensive solutions set for communications applications. Our VCOs feature: Low phase noise Our specialty 00% factory tested Cost Extremely competitive Custom designs From your specifications For more details, contact your M/A-COM Tech sales office or visit macomtech.com/vcos Power Output (dbm) Min Max Tune Voltage (V) Min Max Phase Noise SSB Offset Freq Typical 0 khz 5 khz MHz Tuning Sensitivity (MHz/V) Power Supply Vcc (V) Ic (ma) Nom Max Temp Range ( C) Min Max VCO Type (band) Package Style MAVC Single LSM MAVC Dual LSM MAVC Dual LSM MAVC Dual LSM MAVC Single LSM7 MAVC Single LSM MAVC Dual LSM MAVC Single LSM7 MAVC Single LSM7 MAVC Single LSM LSM x x mm LSM x x 5.5 mm LSM. x 9.5 x 5.5 mm x MAX LSM x x 7 mm LSM7 6.0 x 8.0 x.9 mm MAX PIN

5 Passive Products Mixers M/A-COM Tech mixers can be used in a wide variety of applications such as modulators, phase detectors, frequency synthesizers, and converters. They are ideal for use in CATV head end systems and up converter applications. Our low cost, passive mixers are constructed using broadband ferrite balun transformers and matched silicon Schottky diodes. Frequency (RF/LO) Frequency (IF) Part LO Drive Conversion Isol. (LO/RF) IP Typ Input PdB (MHz) (MHz) Number (dbm) Loss (db) (db) (dbm) (dbm) Package DC MAMXES SM ELCM SM ELCM-H SM EMRS SM MAMXES SM ESMD-C SM ELCM-MH SM MAMX BML SM ELCM SM MAMXES SM EMRS SM ELCM SM EMRS-5MH SM ELCM-X SM MAMX-0078-CM5MH SM ESMD-C SM MAMX SM EMRS-F SM ESMD-C50H SM MAMXES SM ESMD-C50L SM ESMD-C50M SM MAMX SM MAMX-007-ES SM EMRS-6HX SM MAMX ES SM MAMX ES SM MAMXES SM-87 Part numbers are RoHS compliant Blue listings indicate standard stock items widely available from our franchised distribution partners. 75 (0.90) 0.85 () 6 (.5) 6 (.5) (.) 0.5 (0.5) 0.5 (6.) EC 0.70 (9.9) SM- SM- SM- (0.787) MAX (.96) (6.856).0 (0.787) 0.5 (5.6). 7 (0.9) (.77) 0.05 (.66) (.) (.8) 50 (.7) (.8) 0.00 (.5) 0 () 0.50 (.8) 0 () 0 () 0.50 MAX (.8 MAX) 0.0 (.0) 55 (.97) 65 (.65) 0 () 0.90 (.8) 0.0 (5.) 0.0 (.5) 5 (.7) (0.5) 0. (7.87) 0.0 (0.6) 0.0 (.5) 5 (.5) 6 (.5) 0.0 (5.08) (0.5) 0.0 (.5) 0. (0.67) ORIENTATION DOT 7 (.9) 0.00 (.5) 5 (0.89) 0.70 ( ) 55 (.97) SM- (5.08)MAX (.8) 0.00 (.5) 5 (0.89) 0 (0.5) 5 (0.6) 70 (.78) 0.0 (7.87)

6 Passive Products Couplers M/A-COM Tech s low cost couplers operate from 5 MHz 000 MHz, and are four port devices. The isolated port is not terminated internally in the unit, allowing the coupler to be used in applications where dual directional coupling is required. Frequency Part Impedance Coupling Insertion Maximum Isolation (MHz) Number (Ohms) (db) Loss (db) Power (W) (db) Package EMDC-0-TR SM MACP T SM EMDC-6-TR SM- 6-7 MACP-00-B889X SM-55B EMDC-0-TR SM MACP MDC SM- Power Splitters/Combiners M/A-COM Tech's broadband power splitters/combiners are reciprocal devices which can be used to either divide or sum multiple signals. Through the use of ferrite core technology, our splitters/combiners offer an excellent combination of features such as small size, low cost, low loss, and excellent phase and amplitude balance. Frequency Part Impedance Isolation Phase Balance Amplitude (MHz) Number (Ohms) Channels (db) (degrees) Balance (db) Package MAPD CT SM MAPD-0076-ES SM ESSM--6TR SM ESML--TR SM MAPD-0079-ESML SM ESSM--6TR SM MAPD ESSM SM MAPD ST SM MAPD HW SM ESML--TR SM MAPD HR SM MAPD HW68 50 SM MAPD HW7 50 SM MAPD CG SM-56 Part numbers are RoHS compliant indicates non-rohs compliant Blue listings indicate standard stock items widely available from our franchised distribution partners. SM-6 SM-87 SM-89 SM-XX LETTERS EC OVER PIN 0.80 (0.) EC 0.0 (0.9) (0.6) (.5) 0.0 (7.6) (0.850) 0 (.06) 6 (.5) 0. (5.58) MAX (0.6) 0.0 (5.08) 6 (.5) 0.0 (.80) 0. (7.88) ORIENTATION DOT 0 (.0) 0.5 ( ) 50 (.7) 0.00 (5.08)MAX 5 (.7) 0.00 (.5) 7 (.78 ) 0.0 (7.87) (7.88) 0.5 (6.5 ± 0.) 59 (.50) 5 (.7) 0.00 (.5) 0.5 (.70) MAX 8 (.0) 0.0 (7.87).8 (0.5) 0.55 ().8 (0.5) 0.87 () () 0.50 ().00 (8).8 (0.9).0 (0.) (.800) 0.8 (.9) 0.00 (.5) 5 (.) (.5) (.0) 5 (.) 0.8 ().0 ().77 (7).8 (0.).65 (6)

7 Passive Products Transformers M/A-COM Tech designs a wide range of transmission line transformers to suit today s most advanced telecommunications applications. Our transformer design team will also work closely with system design engineers to meet custom specifications. Since we combine proven technological expertise with innovative high quality and low cost manufacturing capabilities, M/A-COM Tech is already the partner of choice for some of the world s leading infrastructure companies. Frequency Part Impedance Impedance Insertion RF Power (MHz) Number (Ohms) Ratio Loss (db) (W) Package 5-00 ETC-T-TR 50 : SM MABA MHz 50 : SM ETC-TTR 50 : 0.5 SM MABA ETC 50 : 0.5 SM MABAES : SM MABA HWCA 50 : SM ETC-TR 50 : 0.5 SM MABA-0077-ETC0 50 : 0.5 SM MABAES : SM MABA T60 50 : SM MABA-007-R50 50 : SM MABA-00-FLUX8 50 8: SM MABA TCT5 50 : 0.5 SM MABA-0098-CT : SM ETC--TR 50 : 0.5 SM MABAES : 0.5 SM ETK-TTR 50 : 0.5 SM MABA ETKT 50 : 0.5 SM MABA-0097-ETKMM 50 : 0.5 SM-6B MABA TCP : SM ETC.5-7TR 50.5: 0.5 SM MABA-0096-ETSM 50 : 0.5 SM MABA HWCA 50 : SM MABA-0079-WTTC 50 : SM MABA-005-TC 50 : SM ETC--TR 50 : 0.5 SM MABA : 0.5 SM ETC6-T-TR 50 6: 0.5 SM ETC-- 50 : 0.5 SM MABA-007-ES0 75.: SM MABA-000-ES0 50 : SM ETC.6---TR 50 : 0.5 SM MABA-0076-C6 50 : 0.5 SM ETC--6TR 50 : 0.5 SM ETC--0TR 50 : 0.5 SM- SM-56 SM-6B SM-95 SM-97.±0%.±0%.7±0%.±0%.±0% MAX 0.8 () 0.7 ().8 (7).8 (0.5).8 (0.5). (5) 0.50 ().±0%.±5%.7±0% () 0.87 () 0.6 ().7 (5) 0.8 ().8 (0.5) ().7 (5).78 (0.).8 (0.9).0 (0.) ().77 (7).8 (0.).65 (6)

8 Passive Products Inductors M/A-COM Tech's inductors provide an unmatched balance of low cost, high Q, and small size. Our inductors utilize a high permeability ferrite core which offers the advantage of containing stray magnetic fields. This is a feature that is not available with other suppliers air and ceramic core solutions. Self Resonant Part Inductance Frequency (MHz) Number (nh) Qmin Package 0-90 MALX NHIN SM MABA SM-00 Designer's Kit MABA KIT (electrical specifications of each model) Frequency Part Ω Insertion Loss (MHz) Number ratio db MHz db MHz db MHz Configuration MABA MHZ : D ETC--6TR : C ETC--0TR : B 5-00 MABA ES9 : C MABA : A MABA-005-TC : A - 50 MABA CT0068 : -00 D MABA-0098-ETCT : -500 D MABA-0097-ETKMM : E MABA TCT7 : E MABA-0076-C6 : E MABA-00-FLUX8 :8-500 D 0-75 ETC9-T-5TR : D 5-0 ETC6-T-TR :6 5-0 D Transformers ranging from to 000 MHz Very wide bandwidth Termination finish, both gold over nickel-plated and tin-plated Various surface mount parts RoHS compliant Each kit contains: 5 models x 0 of each = 50 total Configurations A B C Pri Sec Pri Sec Pri Sec D E Pri Sec Pri Sec Note: Part numbers are RoHS compliant indicates non-rohs compliant Detailed specifications for our standard parts can be found quickly on our web site at macomtech.com by typing the part number into the search box. All specifications are subject to change. M/A-COM Technology Solutions Inc. Lowell, Massachusetts 085 North America Europe India China (Shanghai) macomtech.com MTS-L-0500

RoHS compliant part numbers for legacy parts - Cross reference 2015

RoHS compliant part numbers for legacy parts - Cross reference 2015 Leaded RoHS Compliant Description AM50-0002 MAALSS0042 High Dynamic Range Low Noise Amplifier, 1.55-1.60 GHz AM50-0003 MAAL-008091 High Dynamic Range Low Noise Amplifier, 800-1000 MHz AM50-0004 MAAMSS0045

More information

Features. = +25 C, Vdc = +12V

Features. = +25 C, Vdc = +12V Typical Applications The VCO Module is ideal for: Industrial/Medical Equipment Test & Measurement Equipment Military Radar, EW & ECM Lab Instrumentation Functional Diagram Electrical Specifications, T

More information

Features. = +25 C, Vcc = +5V. Parameter Min. Typ. Max. Units Frequency Range GHz Power Output 3 dbm SSB Phase 10 khz Offset -60 dbc/hz

Features. = +25 C, Vcc = +5V. Parameter Min. Typ. Max. Units Frequency Range GHz Power Output 3 dbm SSB Phase 10 khz Offset -60 dbc/hz Typical Applications Low Noise wideband MMIC VCO is ideal for: Industrial/Medical Equipment Test & Measurement Equipment Military Radar, EW & ECM Functional Diagram Features Wide Tuning Bandwidth Pout:

More information

Features. = +25 C, Vcc = +5V [1]

Features. = +25 C, Vcc = +5V [1] Typical Applications Low Noise wideband MMIC VCO is ideal for: Features Wide Tuning Bandwidth Industrial/Medical Equipment Test & Measurement Equipment Military Radar, EW & ECM Functional Diagram Pout:

More information

Features. Upconversion & Downconversion Applications MIXERS - SINGLE & DOUBLE BALANCED - SMT

Features. Upconversion & Downconversion Applications MIXERS - SINGLE & DOUBLE BALANCED - SMT v1. Typical Applications The HMC689LP4(E) is Ideal for: Cellular/3G & LTE/WiMAX/4G Basestations & Repeaters GSM, CDMA & OFDM Transmitters and Receivers Features High Input IP3: +32 dbm Low Conversion Loss:

More information

EVALUATION KIT AVAILABLE 10MHz to 1050MHz Integrated RF Oscillator with Buffered Outputs. Typical Operating Circuit. 10nH 1000pF MAX2620 BIAS SUPPLY

EVALUATION KIT AVAILABLE 10MHz to 1050MHz Integrated RF Oscillator with Buffered Outputs. Typical Operating Circuit. 10nH 1000pF MAX2620 BIAS SUPPLY 19-1248; Rev 1; 5/98 EVALUATION KIT AVAILABLE 10MHz to 1050MHz Integrated General Description The combines a low-noise oscillator with two output buffers in a low-cost, plastic surface-mount, ultra-small

More information

Features. = +25 C, IF = 200 MHz, LO = 0 dbm, Vcc = Vcc1, 2, 3 = +5V, G_Bias = +2.5V*

Features. = +25 C, IF = 200 MHz, LO = 0 dbm, Vcc = Vcc1, 2, 3 = +5V, G_Bias = +2.5V* v4.1 Typical Applications The HMC685LP4(E) is Ideal for: Cellular/3G & LTE/WiMAX/4G Basestations & Repeaters GSM, CDMA & OFDM Transmitters and Receivers Features High Input IP3: +35 dbm 8 db Conversion

More information

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK Typical Applications Low noise wideband

More information

Features. Upconversion & Downconversion Applications MIXERS - SINGLE & DOUBLE BALANCED - SMT

Features. Upconversion & Downconversion Applications MIXERS - SINGLE & DOUBLE BALANCED - SMT v1. Typical Applications The HMC688LP4(E) is Ideal for: Cellular/3G & LTE/WiMAX/4G Basestations & Repeaters GSM, CDMA & OFDM Transmitters and Receivers Features High Input IP3: +35 dbm Low Conversion Loss:

More information

HMC6380LC4B. WIDEBAND VCOs - SMT. Electrical Specifications, T A. Typical Applications. Features. General Description. Functional Diagram

HMC6380LC4B. WIDEBAND VCOs - SMT. Electrical Specifications, T A. Typical Applications. Features. General Description. Functional Diagram Typical Applications Low Noise wideband MMIC VCO is ideal for: Industrial/Medical Equipment Test & Measurement Equipment Satcom Military Radar, EW, & ECM Functional Diagram Features Wide Tuning Bandwidth

More information

Features. = +25 C, Vcc = +5V

Features. = +25 C, Vcc = +5V Typical Applications Low noise wideband MMIC VCO for applications such as: Industrial/Medical Equipment Test & Measurement Equipment Military Radar, EW & ECM Functional Diagram Features Wide Tuning Bandwidth

More information

GaAs MMIC Double Balanced Mixer. Description Package Green Status

GaAs MMIC Double Balanced Mixer. Description Package Green Status GaAs MMIC Double Balanced Mixer MM1-0212SSM 1. Device Overview 1.1 General Description The MM1-0212SSM is a highly linear GaAs MMIC double balanced mixer. MM1-0212SSM is a low frequency, high linearity

More information

Features. = +25 C, IF= 100 MHz, LO= +15 dbm* Parameter Min. Typ. Max. Min. Typ. Max. Units

Features. = +25 C, IF= 100 MHz, LO= +15 dbm* Parameter Min. Typ. Max. Min. Typ. Max. Units v2.514 MIXER, 2.5-7. GHz Typical Applications The is ideal for: WiMAX & Fixed Wireless Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment & Sensors Military End-Use Functional Diagram Features

More information

Low Power GaAs MMIC Double Balanced Mixer. Refer to our website for a list of definitions for terminology presented in this table.

Low Power GaAs MMIC Double Balanced Mixer. Refer to our website for a list of definitions for terminology presented in this table. Low Power GaAs MMIC Double Balanced Mixer MM1-0212LSM 1. Device Overview 1.1 General Description The MM1-0212LSM is a low power GaAs MMIC double balanced mixer that operates at LO powers as a low as +1

More information

Low LO Drive Surface Mount MMIC IQ Mixer. Refer to our website for a list of definitions for terminology presented in this table.

Low LO Drive Surface Mount MMIC IQ Mixer. Refer to our website for a list of definitions for terminology presented in this table. Low LO Drive Surface Mount MMIC IQ Mixer MMIQ-0520LSM 1. Device Overview 1.1 General Description The MMIQ-0520LSM is a low LO drive, passive GaAs MMIC IQ mixer that operates down to an unrivaled +3 dbm

More information

MASW SPDT High Isolation Terminated Switch GHz Rev. V4. Features. Functional Block Diagram. Description. Pin Configuration 3

MASW SPDT High Isolation Terminated Switch GHz Rev. V4. Features. Functional Block Diagram. Description. Pin Configuration 3 Features Positive Voltage Control High Isolation: 62 db @ 1 GHz 65 db @ 2 GHz Low Insertion Loss: 0.65 db @ 1 GHz 0.70 db @ 2 GHz 50 Ω Internal Terminations Fast Settling for Low Gate Lag requirements

More information

ML485-G. Applications. Functional Block Diagram. Product Features. General Description. Pin Configuration. Ordering Information

ML485-G. Applications. Functional Block Diagram. Product Features. General Description. Pin Configuration. Ordering Information RFMD + TriQuint = Qorvo ML 1.-3.2 GHz High IP3 Mixer with Integrated LO Amp Applications PCS / 3G Base station / Repeaters WCDMA / LTE WiMax / WiBro ISM / Fixed Wireless HPA Feedback Paths Product Features

More information

Parameter Test Conditions Units Min. Typ. Max. RFC to T X RFC to R X. P IN = +23 dbm, AC 80 MHz / 256 QAM

Parameter Test Conditions Units Min. Typ. Max. RFC to T X RFC to R X. P IN = +23 dbm, AC 80 MHz / 256 QAM Features 2.11a,n,ac Applications.9 db T X Insertion Loss 19 db R X Isolation 12 db R X Gain 2.2 db Noise Figure 1 ma Current - db EVM @ 23 dbm Input (2.11ac MHz / 256 QAM) Lead Free 2 mm 12-lead STQFN

More information

1. Device Overview. 1.2 Electrical Summary. 1.3 Applications. 1.4 Functional Block Diagram. 1.5 Part Ordering Options 1 QFN

1. Device Overview. 1.2 Electrical Summary. 1.3 Applications. 1.4 Functional Block Diagram. 1.5 Part Ordering Options 1 QFN Passive GaAs MMIC IQ Mixer MMIQ-0520HSM 1. Device Overview General Description MMIQ-0520HSM is a high linearity, passive GaAs MMIC IQ mixer. This is an ultra-broadband mixer spanning 5 to 20GHz on the

More information

Description Package Green Status. Refer to our website for a list of definitions for terminology presented in this table.

Description Package Green Status. Refer to our website for a list of definitions for terminology presented in this table. Passive GaAs MMIC IQ Mixer MMIQ-0416HSM 1. Device Overview 1.1 General Description MMIQ-0416HSM is a high linearity, passive GaAs MMIC IQ mixer. This is an ultra-broadband mixer spanning 4 to 16 GHz on

More information

GaAs, MMIC Fundamental Mixer, 2.5 GHz to 7.0 GHz HMC557A

GaAs, MMIC Fundamental Mixer, 2.5 GHz to 7.0 GHz HMC557A FEATURES Conversion loss: db LO to RF isolation: db LO to IF isolation: 3 db Input third-order intercept (IP3): 1 dbm Input second-order intercept (IP2): dbm LO port return loss: dbm RF port return loss:

More information

Zero Bias Silicon Schottky Barrier Detector Diodes

Zero Bias Silicon Schottky Barrier Detector Diodes DATA SHEET Zero Bias Silicon Schottky Barrier Detector Diodes Features High sensitivity Low video impedance Description Skyworks series of packaged, beam-lead and chip zero bias Schottky barrier detector

More information

RF Discrete Devices Designer Kit

RF Discrete Devices Designer Kit RF Discrete Devices Designer Kit The Easier, Faster Way to Design Quality RF Solutions Skyworks Solutions is committed to making your RF designs easier than ever. This design kit includes 5-10 components

More information

MACP Temperature Compensated Directional RMS Power Detector GHz Rev. V1 Features Functional Schematic Description Pin Configuration 3

MACP Temperature Compensated Directional RMS Power Detector GHz Rev. V1 Features Functional Schematic Description Pin Configuration 3 Features Integrated Directional Coupler Low Insertion Loss:.5 db @ Min. detectable power: -15 dbm @ Dynamic range: 45 db @ Built-In Temperature Compensation Lead-Free 1.5 x 1.2 mm 6-Lead TDFN Halogen-Free

More information

Features. = +25 C, IF = 100 MHz, LO = +13 dbm, LSB [1]

Features. = +25 C, IF = 100 MHz, LO = +13 dbm, LSB [1] v1.6 3.5 - GHz Typical Applications The HMC21BMSGE is ideal for: Base stations, Repeaters & Access Points WiMAX, WiBro & Fixed Wireless Portables & Subscribers PLMR, Public Safety & Telematics Functional

More information

Smart Energy Solutions for the Wireless Home

Smart Energy Solutions for the Wireless Home Smart Energy Solutions for the Wireless Home Advanced Metering Infrastructure (AMI) ZigBee (IEEE 802.15.4) Wireless Local Area Networks (WLAN) Industrial and Home Control Plug-in Hybrid Electric Vehicles

More information

Best-in-industry performance. Radar. Communication. Electronic Counter Measures. Laboratory Instrumentation. Commercial and military products

Best-in-industry performance. Radar. Communication. Electronic Counter Measures. Laboratory Instrumentation. Commercial and military products Best-in-industry performance Radar Communication Electronic Counter Measures Laboratory Instrumentation Commercial and military products YIG Filters and Oscillators YIG Products from Teledyne Microwave

More information

Passive GaAs MMIC IQ Mixer. Green Status. Refer to our website for a list of definitions for terminology presented in this table.

Passive GaAs MMIC IQ Mixer. Green Status. Refer to our website for a list of definitions for terminology presented in this table. Passive GaAs MMIC IQ Mixer MMIQ-1037H 1. Device Overview 1.1 General Description MMIQ-1037H is a high linearity, passive GaAs MMIC IQ mixer. This is an ultra-broadband mixer spanning 10 to 37 GHz on the

More information

OBSOLETE HMC915LP4E. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram. General Description

OBSOLETE HMC915LP4E. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram. General Description v1.5 LO AMPLIFIER,.5-2.7 GHz Typical Applications The is ideal for: PCS / 3G Infrastructure Base Stations & Repeaters WiMAX & WiBro ISM & Fixed Wireless Functional Diagram Features Input IP3: +28 dbm Low

More information

10MHz to 1050MHz Integrated RF Oscillator with Buffered Outputs

10MHz to 1050MHz Integrated RF Oscillator with Buffered Outputs 9-24; Rev 2; 2/02 EVALUATION KIT AVAILABLE 0MHz to 050MHz Integrated General Description The combines a low-noise oscillator with two output buffers in a low-cost, plastic surface-mount, ultra-small µmax

More information

MMIC VCO MMVC92. MMIC VCO GHz Type Q. General Description. Features. Packages. Functional Diagram. Applications

MMIC VCO MMVC92. MMIC VCO GHz Type Q. General Description. Features. Packages. Functional Diagram. Applications 8.6-9.5 GHz General Description The is designed in a highly reliable InGaP-GaAs Hetero-Junction Bipolar Transistor (HBT) process with active device, integrated resonator, tuning diode and isolating output

More information

Features OBSOLETE. = +25 C, IF= 1 GHz, USB, LO = +15 dbm [1]

Features OBSOLETE. = +25 C, IF= 1 GHz, USB, LO = +15 dbm [1] v1.414 HMC141LC4 Typical Applications The HMC141LC4 is Ideal for: Point-to-Point Radio Point-to-Multi-Point Radio Test Equipment & Sensors Military End Use Functional Diagram Features Wide IF Bandwidth:

More information

Features. Packages. Applications

Features. Packages. Applications 8.4-9.1 GHz General Description The MMVC88 is designed in a highly reliable InGaP-GaAs Hetero-Junction Bipolar Transistor (HBT) process with active device, integrated resonator, tuning diode and isolating

More information

TGV2561-SM GHz VCO with Divide by 2

TGV2561-SM GHz VCO with Divide by 2 GND RFout / 2 Vtune TGV2561-SM Applications Point to Point Radio / VSAT Millimeter-wave Communications Test Equipment 32-pin 5x5mm package Product Features Functional Block Diagram Frequency range: 8.9

More information

1 MHz to 2.7 GHz RF Gain Block AD8354

1 MHz to 2.7 GHz RF Gain Block AD8354 1 MHz to 2.7 GHz RF Gain Block AD834 FEATURES Fixed gain of 2 db Operational frequency of 1 MHz to 2.7 GHz Linear output power up to 4 dbm Input/output internally matched to Ω Temperature and power supply

More information

SSB0260A Single Sideband Mixer GHz

SSB0260A Single Sideband Mixer GHz Single Sideband Mixer.2 6. GHz FEATURES LO/RF Frequency: Input IP3: Sideband Suppression: LO Leakage: LO Power: DC Power:.2 6. GHz +32 dbm -45 dbc (Typical) -5 dbm (Typical) -1 to +1 dbm +5V @ 5 ma DESCRIPTION

More information

Features. = +25 C, Vcc = +5V. Parameter Min. Typ. Max. Units Fo Fo/2 RFOUT RFOUT/2

Features. = +25 C, Vcc = +5V. Parameter Min. Typ. Max. Units Fo Fo/2 RFOUT RFOUT/2 Typical Applications Low noise MMIC VCO w/half Frequency, for: VSAT Radio Point to Point/Multi-Point Radio Test Equipment & Industrial Controls Military End-Use Functional Diagram Features Dual Output:

More information

Low Cost Mixer for the 10.7 to 12.8 GHz Direct Broadcast Satellite Market

Low Cost Mixer for the 10.7 to 12.8 GHz Direct Broadcast Satellite Market Low Cost Mixer for the.7 to 12.8 GHz Direct Broadcast Satellite Market Application Note 1136 Introduction The wide bandwidth requirement in DBS satellite applications places a big performance demand on

More information

MACP Temperature Compensated Directional RMS Power Detector 2-6 GHz Rev. V1 Features Integrated Directional Coupler Low Insertion Loss: 0.15 db

MACP Temperature Compensated Directional RMS Power Detector 2-6 GHz Rev. V1 Features Integrated Directional Coupler Low Insertion Loss: 0.15 db Features Integrated Directional Coupler Low Insertion Loss: 0.15 db @ 4 GHz Min. detectable power: -15 dbm @ 4 GHz Dynamic range: 45 db @ 4 GHz Built-In Temperature Compensation Lead-Free 1.5 x 1.2 mm

More information

MAOC Preliminary Information. Broadband Voltage Controlled Oscillator 6-12 GHz Preliminary - Rev. V3P. Features. Block Diagram.

MAOC Preliminary Information. Broadband Voltage Controlled Oscillator 6-12 GHz Preliminary - Rev. V3P. Features. Block Diagram. Features Octave Tuning Bandwidth Phase Noise: -95 dbc/hz @ 100 khz V TUNE Range: 0-23 V Low Current Consumption: 58 ma Excellent Temperature Stability +5 V Bias Supply Lead-Free 4 mm 24-Lead Package RoHS*

More information

FMMX9003 DATA SHEET. Field Replaceable SMA IQ Mixer From 11 GHz to 16 GHz With an IF Range From DC to 3.5 GHz And LO Power of +19 dbm.

FMMX9003 DATA SHEET. Field Replaceable SMA IQ Mixer From 11 GHz to 16 GHz With an IF Range From DC to 3.5 GHz And LO Power of +19 dbm. FMMX93 Field Replaceable SMA IQ Mixer From 11 GHz to 16 GHz With an IF Range From DC to 3.5 GHz And LO Power of +19 dbm FMMX93 is an I/Q double balanced millimeter-wave mixer module that operates across

More information

High-Dynamic-Range MMIC Amplifier Supports CATV Upstream and Downstream Applications (AN )

High-Dynamic-Range MMIC Amplifier Supports CATV Upstream and Downstream Applications (AN ) High-Dynamic-Range MMIC Amplifier Supports CATV Upstream and Downstream Applications (AN-60-087) I. INTRODUCTION CATV systems typically require 75Ω components with an operating frequency range of 40 to

More information

HMC358MS8G / 358MS8GE

HMC358MS8G / 358MS8GE Typical Applications Low noise MMIC VCO w/buffer Amplifi er for C-Band applications such as: UNII & Pt. to Pt. Radios 802.a & HiperLAN WLAN VSAT Radios Features Pout: + dbm Phase Noise: -0 dbc/hz @100

More information

1 MHz to 2.7 GHz RF Gain Block AD8354

1 MHz to 2.7 GHz RF Gain Block AD8354 Data Sheet FEATURES Fixed gain of 2 db Operational frequency of 1 MHz to 2.7 GHz Linear output power up to 4 dbm Input/output internally matched to Ω Temperature and power supply stable Noise figure: 4.2

More information

Features. = +25 C, Vcc = +3V

Features. = +25 C, Vcc = +3V Typical Applications Low noise MMIC VCO w/buffer Amplifi er for: VSAT & Microwave Radio Test Equipment & Industrial Controls Military Features Pout: +dbm Phase Noise: -106 dbc/hz @100 khz No External Resonator

More information

Features. = +25 C, Vcc = +5V. Parameter Min. Typ. Max. Units Fo Fo/2 RFOUT RFOUT/2

Features. = +25 C, Vcc = +5V. Parameter Min. Typ. Max. Units Fo Fo/2 RFOUT RFOUT/2 v4.11 HMC5LP5 / 5LP5E OUTPUT 7.3 -.2 GHz Typical Applications Low noise MMIC VCO w/half Frequency, for: VSAT Radio Point to Point/Multi-Point Radio Test Equipment & Industrial Controls Military End-Use

More information

1. Device Overview. Low LO Drive Passive GaAs MMIC IQ Mixer

1. Device Overview. Low LO Drive Passive GaAs MMIC IQ Mixer Low LO Drive Passive GaAs MMIC IQ Mixer MMIQ-1040L 1. Device Overview 1.1 General Description MMIQ-1040L is a low LO drive, passive GaAs MMIC IQ mixer that operates down to an unrivaled +3 dbm LO drive

More information

Frequency vs. Tuning Voltage, Vcc = +4.2V 17 Frequency vs. Tuning Voltage, T= 25 C FREQUENCY (GHz) FREQUENCY (GHz) Vcc = 4.

Frequency vs. Tuning Voltage, Vcc = +4.2V 17 Frequency vs. Tuning Voltage, T= 25 C FREQUENCY (GHz) FREQUENCY (GHz) Vcc = 4. Typical Applications The HMC736LP4(E) is ideal for: Point to Point/Multipoint Radio Test Equipment & Industrial Controls SATCOM Military End-Use Functional Diagram Features Dual Output: Fo = Fo/2 = 7.25-7.5

More information

Top View (Near-side) Side View Bottom View (Far-side) .89±.08. 4x.280. Orientation Marker Orientation Marker.

Top View (Near-side) Side View Bottom View (Far-side) .89±.08. 4x.280. Orientation Marker Orientation Marker. Model B2F2AHF Ultra Low Profile 168 Balun Ω to 2Ω Balanced Description The B2F2AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential input locations on data conversion

More information

TAT8858-EB. CATV Infrastructure Push-Pull Amplifier. Applications. Ordering Information

TAT8858-EB. CATV Infrastructure Push-Pull Amplifier. Applications. Ordering Information Applications CATV Line Amplifiers CATV System Amplifiers Distribution Nodes Green Applications Product Features SOIC-6 Wide Package Functional Block Diagram 75 Ω, 50 000 MHz Bandwidth GaAs phemt & MESFET

More information

Features. = +25 C, Vcc = +3V

Features. = +25 C, Vcc = +3V Typical Applications Low noise MMIC VCO w/buffer Amplifi er for: Wireless Local Loop (WLL) VSAT & Microwave Radio Test Equipment & Industrial Controls Military Features Pout: +4.9 dbm Phase Noise: -3 dbc/hz

More information

LBI-38642B. MAINTENANCE MANUAL RECEIVER FRONT END MODULE 19D902782G1: MHz 19D902782G2: MHz DESCRIPTION TABLE OF CONTENTS

LBI-38642B. MAINTENANCE MANUAL RECEIVER FRONT END MODULE 19D902782G1: MHz 19D902782G2: MHz DESCRIPTION TABLE OF CONTENTS LBI-38642B MAINTENANCE MANUAL RECEIVER FRONT END MODULE 19D902782G1: 136-151 MHz 19D902782G2: 150-174 MHz TABLE OF CONTENTS Page DESCRIPTION............................................... Front Cover SPECIFICATIONS.............................................

More information

MSW2T /MSW2T /MSW2T SP2T Surface Mount High Power PIN Diode Switch

MSW2T /MSW2T /MSW2T SP2T Surface Mount High Power PIN Diode Switch PRELIMINARY MSW2T-2030-192/MSW2T-2031-192/MSW2T-2032-192 SP2T Surface Mount High Power PIN Diode Switch Features: Wide Operating Frequency Band: 50 MHz to 6 GHz Surface Mount SP2T Switch 5mm x 8mm x 2.5mm

More information

2016 PRODUCT SELECTION GUIDE

2016 PRODUCT SELECTION GUIDE 2016 PRODUCT SELECTION GUIDE Couplers Splitters Transformers About MiniRF, Inc. MiniRF is a new name for a passive component company with over 20 years of design and manufacturing experience. The company

More information

ericssonz LBI-38642C MAINTENANCE MANUAL RECEIVER FRONT END MODULE 19D902782G1: MHz 19D902782G2: MHz DESCRIPTION TABLE OF CONTENTS

ericssonz LBI-38642C MAINTENANCE MANUAL RECEIVER FRONT END MODULE 19D902782G1: MHz 19D902782G2: MHz DESCRIPTION TABLE OF CONTENTS LBI-38642C MAINTENANCE MANUAL RECEIVER FRONT END MODULE 19D902782G1: 136-151 MHz 19D902782G2: 150-174 MHz TABLE OF CONTENTS Page DESCRIPTION............................................... Front Cover SPECIFICATIONS.............................................

More information

ADDENDUM NUMBER 2 TO MAINTENANCE MANUAL LBI-38642D Refer to ECO# RECEIVER FRONT END PWB 19D902490G1 (19D902490, Sh. 1, Rev.

ADDENDUM NUMBER 2 TO MAINTENANCE MANUAL LBI-38642D Refer to ECO# RECEIVER FRONT END PWB 19D902490G1 (19D902490, Sh. 1, Rev. ADDENDUM NUMBER 2 TO MAINTENANCE MANUAL Refer to ECO#20026373 RECEIVER FRONT END PWB 19D902490G1 (19D902490, Sh. 1, Rev. 9) 1 ADDENDUM NUMBER 2 TO MAINTENANCE MANUAL Refer to ECO#20026373 RECEIVER FRONT

More information

UM4000/UM Microsemi Microwave Products 75 Technology Drive, Lowell, MA , , Fax:

UM4000/UM Microsemi Microwave Products 75 Technology Drive, Lowell, MA , , Fax: UM4 / UM49 DESCRIPTION The UM4 and UM49 series features high power PIN diodes with long carrier lifetimes and thick I-regions. They are especially suitable for use in low distortion switches and attenuators,

More information

Low voltage LNA, mixer and VCO 1GHz

Low voltage LNA, mixer and VCO 1GHz DESCRIPTION The is a combined RF amplifier, VCO with tracking bandpass filter and mixer designed for high-performance low-power communication systems from 800-1200MHz. The low-noise preamplifier has a

More information

Silicon Schottky Barrier Diodes in Hermetic and Epoxy Ceramic Packages

Silicon Schottky Barrier Diodes in Hermetic and Epoxy Ceramic Packages DATA SHEET Silicon Schottky Barrier Diodes in Hermetic and Epoxy Ceramic Packages Applications Detectors Mixers Features Available in both P-type and N-type low barrier designs Low /f noise Packages rated

More information

Features. = +25 C, Vcc (Dig), Vcc (Amp), Vcc (RF) = +5V

Features. = +25 C, Vcc (Dig), Vcc (Amp), Vcc (RF) = +5V Typical Applications The HMC734LP5(E) is ideal for: Point-to-Point/Multi-Point Radio Test Equipment & Industrial Controls SATCOM Military End-Use Functional Diagram Features Dual Output: Fo = Fo/4 = 2.15-2.55

More information

SKY : Direct Quadrature Demodulator GHz Featuring No-Pull LO Architecture

SKY : Direct Quadrature Demodulator GHz Featuring No-Pull LO Architecture PRELIMINARY DATA SHEET SKY73013-306: Direct Quadrature Demodulator 4.9 5.925 GHz Featuring No-Pull LO Architecture Applications WiMAX, WLAN receivers UNII Band OFDM receivers RFID, DSRC applications Proprietary

More information

PXI MICROWAVE LOCAL OSCILLATOR MODULE

PXI MICROWAVE LOCAL OSCILLATOR MODULE The PXI-1450B Local Oscillator Module is a PXI 3U, 2-slot synthesizer module intended for frequency down conversion applications. The PXI-1450B is a VCO-based, 3 to 9 GHz synthesizer that uses QuickSyn

More information

MAAL Low Noise Amplifier GHz. Features. Functional Block Diagram. Description. Pin Configuration 1. Ordering Information 2,3 N/C

MAAL Low Noise Amplifier GHz. Features. Functional Block Diagram. Description. Pin Configuration 1. Ordering Information 2,3 N/C MAAL-4.1-3. GHz Features Single Voltage Supply 3V ~ V Integrated Active Bias Circuit Adjustable Current with an External Resistor Low Noise Figure High Linearity OIP3, 34 dbm @ 2 GHz Broadband Match Integrated

More information

1GHz low voltage LNA, mixer and VCO

1GHz low voltage LNA, mixer and VCO DESCRIPTION The is a combined RF amplifier, VCO with tracking bandpass filter and mixer designed for high-performance low-power communication systems from 800-1200MHz. The low-noise preamplifier has a

More information

Features. = +25 C, Vcc (Dig), Vcc (Amp), Vcc (RF) = +5V. Parameter Min. Typ. Max. Units Fo Fo/4 RFOUT RFOUT/4

Features. = +25 C, Vcc (Dig), Vcc (Amp), Vcc (RF) = +5V. Parameter Min. Typ. Max. Units Fo Fo/4 RFOUT RFOUT/4 .6-10.2 GHz Typical Applications The HMC734LP5(E) is ideal for: Point-to-Point/Multi-Point Radio Test Equipment & Industrial Controls SATCOM Military End-Use Functional Diagram Features Dual Output: Fo

More information

XP1080-QU-EV1. Power Amplifier GHz. Functional Schematic. Features. Description. Pin Configuration 1. Ordering Information. Rev.

XP1080-QU-EV1. Power Amplifier GHz. Functional Schematic. Features. Description. Pin Configuration 1. Ordering Information. Rev. 2 3 4 5 6 7 8 16 15 14 13 12 11 10 Features Linear On-Chip Power Detector Output Power Adjust 25.0 db Small Signal Gain +27.0 dbm P1dB Compression Point +38.0 dbm OIP3 Lead-Free 7 mm 28-lead SMD Package

More information

3 V SUPER MINIMOLD L-BAND SI MMIC DOWNCONVERTER

3 V SUPER MINIMOLD L-BAND SI MMIC DOWNCONVERTER V SUPER MINIMOLD L-BAND SI MMIC DOWNCONVERTER FEATURES HIGH DENSITY SURFACE MOUNTING: Pin Super Minimold or SOT- package WIDE BAND OPERATION: RF =. to. GHz IF = to MHz ON BOARD OSCILLATOR SUPPLY VOLTAGE:

More information

MAAM Wideband Amplifier 10 MHz - 40 GHz Rev. V2. Features. Functional Schematic. Description. Pin Configuration. Ordering Information 1,2

MAAM Wideband Amplifier 10 MHz - 40 GHz Rev. V2. Features. Functional Schematic. Description. Pin Configuration. Ordering Information 1,2 MAAM-1119 1 MHz - 4 GHz Rev. V2 Features 13 db Gain Ω Input / Output Match +18 dbm Output Power + V DC, 19 ma Lead-Free mm 9-lead LGA Package RoHS* Compliant and 26 C Reflow Compatible Description The

More information

GaAs MMIC Non-Linear Transmission Line. Packag e. Refer to our website for a list of definitions for terminology presented in this table.

GaAs MMIC Non-Linear Transmission Line. Packag e. Refer to our website for a list of definitions for terminology presented in this table. GaAs MMIC Non-Linear Transmission Line NLTL-6273SM 1. Device Overview 1.1 General Description NLTL-6273SM is a MMIC non-linear transmission line (NLTL) based comb generator. This NLTL offers excellent

More information

12.92 GHz to GHz MMIC VCO with Half Frequency Output HMC1169

12.92 GHz to GHz MMIC VCO with Half Frequency Output HMC1169 Data Sheet 12.92 GHz to 14.07 GHz MMIC VCO with Half Frequency Output FEATURES Dual output frequency range fout = 12.92 GHz to 14.07 GHz fout/2 = 6.46 GHz to 7.035 GHz Output power (POUT): 11.5 dbm SSB

More information

LF to 4 GHz High Linearity Y-Mixer ADL5350

LF to 4 GHz High Linearity Y-Mixer ADL5350 LF to GHz High Linearity Y-Mixer ADL535 FEATURES Broadband radio frequency (RF), intermediate frequency (IF), and local oscillator (LO) ports Conversion loss:. db Noise figure:.5 db High input IP3: 25

More information

RF Components. Since 2003

RF Components. Since 2003 RF Components Pulse offers a comprehensive line of RF magnetic components for use in CATV/ Hybrid Fiber Coax applications for set-top boxes and gateway devices, for TELCO TV in gateway devices, and FTTP

More information

6 GHz to 10 GHz, GaAs, MMIC, I/Q Mixer HMC520A

6 GHz to 10 GHz, GaAs, MMIC, I/Q Mixer HMC520A 11 7 8 9 FEATURES Radio frequency (RF) range: 6 GHz to 1 GHz Local oscillator (LO) input frequency range: 6 GHz to 1 GHz Conversion loss: 8 db typical at 6 GHz to 1 GHz Image rejection: 23 dbc typical

More information

BROADBAND DISTRIBUTED AMPLIFIER

BROADBAND DISTRIBUTED AMPLIFIER ADM1-26PA The ADM1-26PA is a complete LO driver solution for use with all Marki mixers up to 26. GHz. This single-stage packaged GaAs MMIC distributed amplifier integrates all required biasing circuitry.

More information

MAAM Driver Amplifier GHz Rev. V3. Functional Schematic. Features. Description. Pin Configuration 3,4. Ordering Information 1,2

MAAM Driver Amplifier GHz Rev. V3. Functional Schematic. Features. Description. Pin Configuration 3,4. Ordering Information 1,2 MAAM-11139 7. - 33. GHz Rev. V3 Features 3 Stage for 8/ GHz Bands 1 db Gain dbm Output Third Order Intercept (OIP3) dbm Output P1dB Variable Gain with Adjustable Bias Lead-Free mm Lead PQFN Package RoHS*

More information

SA620 Low voltage LNA, mixer and VCO 1GHz

SA620 Low voltage LNA, mixer and VCO 1GHz INTEGRATED CIRCUITS Low voltage LNA, mixer and VCO 1GHz Supersedes data of 1993 Dec 15 2004 Dec 14 DESCRIPTION The is a combined RF amplifier, VCO with tracking bandpass filter and mixer designed for high-performance

More information

12.17 GHz to GHz MMIC VCO with Half Frequency Output HMC1167

12.17 GHz to GHz MMIC VCO with Half Frequency Output HMC1167 9 0 3 4 5 6 9 7 6.7 GHz to 3.33 GHz MMIC VCO with Half Frequency Output FEATURES Dual output frequency range fout =.7 GHz to 3.330 GHz fout/ = 6.085 GHz to 6.665 GHz Output power (POUT): 0.5 dbm Single-sideband

More information

Features. = +25 C, Vcc1, Vcc2 = +3V. Parameter Min. Typ. Max. Units Fo Fo/2 RFOUT RFOUT/2 RFOUT/4

Features. = +25 C, Vcc1, Vcc2 = +3V. Parameter Min. Typ. Max. Units Fo Fo/2 RFOUT RFOUT/2 RFOUT/4 v4.11 Typical Applications Low noise MMIC VCO w/half Frequency, Divide-by-4 Outputs for: VSAT Radio Point to Point/Multipoint Radio Test Equipment & Industrial Controls Military End-Use Functional Diagram

More information

Features OBSOLETE. = +25 C, Vcc1, Vcc2 = +5.0V. Parameter Min. Typ. Max. Units Frequency Range GHz. Divided Output

Features OBSOLETE. = +25 C, Vcc1, Vcc2 = +5.0V. Parameter Min. Typ. Max. Units Frequency Range GHz. Divided Output v3.81 Typical Applications Low noise MMIC VCO w/divide-by-8 for Ku-Band applications such as: Point-to-Point Radios Point-to-Multi-Point Radios / LMDS VSAT Functional Diagram Features Electrical Specifications,

More information

SAW Components Data Sheet B3750

SAW Components Data Sheet B3750 Features Ceramic package QCC8C RF low-loss filter for remote control receivers Package for Surface Mounted Technology (SMT) Balanced and unbalanced operation possible Passivation layer: Protec Terminals

More information

Model B0922N7575AHF Rev B. Ultra Low Profile 0404 Balun

Model B0922N7575AHF Rev B. Ultra Low Profile 0404 Balun Model B9N7575AHF Ultra Low Profile 44 Balun 75Ω to 75Ω Balanced Description The B9N7575AHF is a low profile, low impedance mm square subminiature wideband unbalanced to balanced transformer designed for

More information

Frequency Divider, Divide by 2 Prescaler Module, 500 MHz to 18 GHz, Field Replaceable SMA

Frequency Divider, Divide by 2 Prescaler Module, 500 MHz to 18 GHz, Field Replaceable SMA Features Divide by 2 Prescaler Wide Frequency Band GaAs HBT MMIC Technology Low Phase Noise -15 dbc/hz @ 1 khz offset Output Power -4 dbm Low Reverse Leakage Level 55 db typical Applications Electronic

More information

Features. = +25 C, Vcc(RF), Vcc(DIG) = +5V

Features. = +25 C, Vcc(RF), Vcc(DIG) = +5V & DIVIDE-BY-16, 23. - 26. GHz Typical Applications The HMC739LP4(E) is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios / LMDS VSAT Features Pout: + dbm Phase Noise: -93 dbc/hz @ 100 khz Typ.

More information

SAW Components. Low-Loss Filter for Mobile Communication. RF360 Europe GmbH. A Qualcomm TDK Joint Venture. Data Sheet B4926.

SAW Components. Low-Loss Filter for Mobile Communication. RF360 Europe GmbH. A Qualcomm TDK Joint Venture. Data Sheet B4926. RF360 Europe GmbH A Qualcomm TDK Joint Venture Series/type: Ordering code: Date: Apr 02, 2003 Version: RF360 products mentioned within this document are offered by RF360 Europe GmbH and other subsidiaries

More information

Features. = +25 C, Vcc1, Vcc2, Vcc3 = +5V. Parameter Min. Typ. Max. Units Frequency Range GHz

Features. = +25 C, Vcc1, Vcc2, Vcc3 = +5V. Parameter Min. Typ. Max. Units Frequency Range GHz Typical Applications Low noise MMIC VCO w/divide-by-16 for: VSAT Radio Point to Point/Multipoint Radio Test Equipment & Industrial Controls Military End-Use Automotive Radar Features Pout: + dbm Phase

More information

11.41 GHz to GHz MMIC VCO with Half Frequency Output HMC1166

11.41 GHz to GHz MMIC VCO with Half Frequency Output HMC1166 9 6 3 30 29 VTUNE 28 27 26.4 GHz to 2.62 GHz MMIC VCO with Half Frequency Output FEATURES Dual output frequency range fout =.4 GHz to 2.62 GHz fout/2 = 5.705 GHz to 6.3 GHz Output power (POUT): dbm Single-sideband

More information

MAINTENANCE MANUAL FOR RECEIVER FRONT END MODULE 19D902782G5

MAINTENANCE MANUAL FOR RECEIVER FRONT END MODULE 19D902782G5 LBI-39028A IC DATA MAINTENANCE MANUAL FOR U1 19A704125P1 Quad Operational Amplifier U30 RYTUA901201/1 Power Module TABLE OF CONTENTS DESCRIPTION................................................ Front Cover

More information

5.5 GHz to 14 GHz, GaAs MMIC Fundamental Mixer HMC558A. Data Sheet FEATURES FUNCTIONAL BLOCK DIAGRAM APPLICATIONS GENERAL DESCRIPTION

5.5 GHz to 14 GHz, GaAs MMIC Fundamental Mixer HMC558A. Data Sheet FEATURES FUNCTIONAL BLOCK DIAGRAM APPLICATIONS GENERAL DESCRIPTION FEATURES Conversion loss: 7.5 db typical at 5.5 GHz to 1 GHz Local oscillator (LO) to radio frequency (RF) isolation: 45 db typical at 5.5 GHz to 1 GHz LO to intermediate frequency (IF) isolation: 45 db

More information

Varactor-Tuned Oscillators. Technical Data. VTO-8000 Series

Varactor-Tuned Oscillators. Technical Data. VTO-8000 Series Varactor-Tuned Oscillators Technical Data VTO-8000 Series Features 600 MHz to 10.5 GHz Coverage Fast Tuning +7 to +13 dbm Output Power ± 1.5 db Output Flatness Hermetic Thin-film Construction Description

More information

Differential Input / Output Impedance Match SM X 5 mm Nominal Footprint Lid Symbolization (YY=year, WW=week, S=shift) 15 pf

Differential Input / Output Impedance Match SM X 5 mm Nominal Footprint Lid Symbolization (YY=year, WW=week, S=shift) 15 pf SF1189B-1 Designed for WLAN IF Applications Low Insertion Loss 5.0 x 5.0 x 1.7 mm Suface-Mount Case Single Ended or Differential Input and Output Differential Output Complies with Directive 2002/95/EC

More information

GaAs MMIC High Dynamic Range Mixer. Description Package Green Status

GaAs MMIC High Dynamic Range Mixer. Description Package Green Status GaAs MMIC High Dynamic Range Mixer MT3L-0113H 1. Device Overview 1.1 General Description MT3L-0113H is a GaAs MMIC triple balanced mixer with high dynamic range and low conversion loss. This mixer belongs

More information

Frequency vs. Tuning Voltage, Vcc = +5V OUTPUT FREQUENCY (GHz) Frequency vs. Tuning Voltage, T= 25 C OUTPUT F

Frequency vs. Tuning Voltage, Vcc = +5V OUTPUT FREQUENCY (GHz) Frequency vs. Tuning Voltage, T= 25 C OUTPUT F Typical Applications The HMC734LP5(E) is ideal for: Point-to-Point/Multi-Point Radio Test Equipment & Industrial Controls SATCOM Military End-Use Functional Diagram Features Dual Output: Fo = Fo/4 = 2.15-2.55

More information

GC9901-GG9944. Microsemi Microwave Products 75 Technology Drive, Lowell, MA , , Fax:

GC9901-GG9944. Microsemi Microwave Products 75 Technology Drive, Lowell, MA , , Fax: DECRIPTION chottky Barrier devices are currently available in single beamlead, dual T, ring quad and bridge quad configurations. Devices are available in monolithic form for hybrid applications as well

More information

Features. = +25 C, Vcc1, Vcc2 = +5V. Parameter Min. Typ. Max. Units Fo Fo/2 RFOUT RFOUT/2 RFOUT/4

Features. = +25 C, Vcc1, Vcc2 = +5V. Parameter Min. Typ. Max. Units Fo Fo/2 RFOUT RFOUT/2 RFOUT/4 v4.11 Typical Applications Low noise MMIC VCO w/half Frequency, Divide-by-4 Outputs for: VSAT Radio Point to Point/Multipoint Radio Test Equipment & Industrial Controls Military End-Use Functional Diagram

More information

Top View (Near-side) Side View Bottom View (Far-side) ± ±.08. 4x.28. Orientation Marker Balanced port 1.

Top View (Near-side) Side View Bottom View (Far-side) ± ±.08. 4x.28. Orientation Marker Balanced port 1. Model BD2FAHF Ultra Low Profile 168 Balun Ω to Ω Balanced Description The BD2FAHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential input locations on data conversion

More information

3V, SUPER MINIMOLD MEDIUM POWER SI MMIC AMPLIFIER

3V, SUPER MINIMOLD MEDIUM POWER SI MMIC AMPLIFIER 3V, SUPER MINIMOLD MEDIUM POWER SI MMIC AMPLIFIER UPC277TB FEATURES HIGH GAIN: 2 db at 9 to MHz Typical HIGH OUTPUT POWER: PSAT = +2. dbm at 9 MHz + dbm at MHz LOW BIAS VOLTAGE: 3. V Typical, 2.7 V Minimum

More information

TQP PCB. DC-6 GHz Gain Block. Applications. Ordering Information

TQP PCB. DC-6 GHz Gain Block. Applications. Ordering Information Applications Mobile Infrastructure LTE / WCDMA / CDMA CATV Point to Point General Purpose Wireless Product Features Cascadable Gain Block DC 6000 MHz 19.1 db Gain @ 1.9 GHz 4.7 db Noise Figure @ 1.9 GHz

More information

MA4P T. Quad PIN Diode π Attenuator MHz. M/A-COM Products Rev. V2. Features. Functional Schematic. Description.

MA4P T. Quad PIN Diode π Attenuator MHz. M/A-COM Products Rev. V2. Features. Functional Schematic. Description. 1-4 MHz Features 4 PIN diodes in a SOT-2 Plastic Package Externally Selectable Bias and RF Matching Network 1 4, MHz Useable Frequency Band + 43 IP3 @ ( Ω) 1. db Loss @ ( Ω) 3 db Attenuation @ ( Ω) Lead-Free

More information